Gräßler, Iris, et al. “Handling of Uncertainties in the Design of Sustainable Additive Manufacturing Products by Merging Design-for-X and Scenario-Technique.” Procedia CIRP ICME, edited by Roberto Teti, Elsevier, 2023.

Lammers, Stefan, et al. Depiction of Support Structures in Technical Drawings. 2023.

Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50931.

Neitzel, Fabian, et al. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50926.

Ott, Manuel, et al. “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien.”10.48447/ADD-2022-014__Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, edited by Deutscher Verband für Materialforschung und -prüfung e.V. , vol. 7, 2022, pp. 91–106, doi:10.48447/ADD-2022-014.

Urbanek, Stefan, et al. Design and Experimental Investigation of an Additively Manufactured PMSM Rotor. 2021, doi:10.1109/IEMDC47953.2021.9449566.

Zhuravlev, Evgeny, et al. “Assessment of AlZnMgCu Alloy Powder Modification for Crack-Free Laser Powder Bed Fusion by Differential Fast Scanning Calorimetry.”10.1016/j.matdes.2021.109677__Materials &; Design, 109677, 2021, doi:10.1016/j.matdes.2021.109677.

Ahlers, Dominik. Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol. 19, Shaker, 2020.

Josupeit, Stefan. On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process. Shaker Verlag GmbH, 2019.