G. Kullmer, D. Weiß, and B. Schramm, “An alternative and robust formulation of the fatigue crack growth rate curve for long cracks,”10.1016/j.engfracmech.2023.109826__Engineering Fracture Mechanics, vol. 296, Art. no. 109826, 2024, doi:10.1016/j.engfracmech.2023.109826 .

P. Lenz and R. Mahnken, “Multiscale simulation of polymer curing of composites combined mean-field homogenisation methods at large strains,”10.1016/j.ijsolstr.2023.112642__International Journal of Solids and Structures, vol. 290, Art. no. 112642, 2024, doi:10.1016/j.ijsolstr.2023.112642 .

A. Amiri, M. Tavana, and H. Arman, “An Integrated Fuzzy Analytic Network Process and Fuzzy Regression Method for Bitcoin Price Prediction,”10.1016/j.iot.2023.101027__Internet of Things, vol. 25, Art. no. 101027, 2024, doi:10.1016/j.iot.2023.101027 .

M. Mirbabaie, S. Stieglitz, and J. Marx, “Negative Word of Mouth On Social Media: A Case Study of Deutsche Bahn’s Accountability Management,”10.1007/s41471-022-00152-w__Schmalenbach Journal of Business Research, 2023, doi:10.1007/s41471-022-00152-w .

M. Hanusch, “A $C^k$-seeley-extension-theorem for Bastiani’s differential calculus,”10.4153/s0008414x21000596__Canadian Journal of Mathematics, vol. 75, no. 1, pp. 170–201, 2023, doi:10.4153/s0008414x21000596 .

M. Hoffmann and R. Biehler, “Student Teachers ’ Knowledge of Congruence before a University Course on Geometry,” in Proceedings of the Fourth Conference of the International Network for Didactic Research in University Mathematics (INDRUM 2022, 19-22 October 2022), 2023.

J. Wippermann et al., “Correction: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint,”10.1007/s40194-023-01499-2__Welding in the World, 2023, doi:10.1007/s40194-023-01499-2 .

M. Hanusch, “The Lax Equation and Weak Regularity of Asymptotic Estimate Lie Groups,”10.1007/s10455-023-09888-y__Annals of Global Analysis and Geometry, vol. 63, no. 21, 2023, doi:10.1007/s10455-023-09888-y .

J. Wippermann et al., “Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint,”10.1007/s40194-023-01465-y__Welding in the World, 2023, doi:10.1007/s40194-023-01465-y .

M. Slapáková et al., “D-structure of intermetallic interface layer in Al–steel clad material,”10.1016/j.vacuum.2023.112043__Vacuum, vol. 212, Art. no. 112043, 2023, doi:10.1016/j.vacuum.2023.112043 .

R. Su et al., “Engineering SubNanometer HafniaBased Ferroelectric to Break The Scaling Relation for HighEfficiency Piezocatalytic Water Splitting,”10.1002/adma.202303018__Advanced Materials, 2023, doi:10.1002/adma.202303018 .

T. Borgert, M. Henke, and W. Homberg, “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements,”10.3390/jmmp7040147__Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 147, 2023, doi:10.3390/jmmp7040147 .

S. Pramanik, J. T. Krüger, M. Schaper, and K.-P. Hoyer, “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution,”10.1007/s11661-023-07186-7__Metallurgical and Materials Transactions A, 2023, doi:10.1007/s11661-023-07186-7 .

S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process,”10.1080/00218464.2023.2245758__The Journal of Adhesion, pp. 1–29, 2023, doi:10.1080/00218464.2023.2245758 .

J. Freund et al., “Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints,”10.1080/00218464.2023.2223475__The Journal of Adhesion, pp. 1–31, 2023, doi:10.1080/00218464.2023.2223475 .

K. Schönhärl, F. Schotters, and G. Thiemeyer, “Editorial,” Werkstatt Geschichte, vol. 88, 2023.

K. Schönhärl, F. Schotters, and G. Thiemeyer, Eds., Reden über Geld, vol. 88. 2023.

K. Schönhärl, “Tax Morale and the Church: How Catholic Clergies Adapted Norms of Paying Taxes to Secular Institutions (1940s–1950s),” in  Reassessing the Moral Economy  Religion and Economic Ethics from Ancient Greece to the 20th Century, T. Skambraks and M. Lutz, Eds. New York: Springer, 2023, pp. 237–258.

S. Hubner-Benz and M. Baum, “What predicts effectuation preferences Disentangling individual and environmental factors and illuminating decision criteria,”10.1504/ijev.2023.129283__International Journal of Entrepreneurial Venturing, vol. 15, no. 1, Art. no. 91, 2023, doi:10.1504/ijev.2023.129283 .

B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets,”10.3390/jmmp7060193__Journal of Manufacturing and Materials Processing, vol. 7, no. 6, Art. no. 193, 2023, doi:10.3390/jmmp7060193 .

H. Westermann and R. Mahnken, “On the accuracy, stability and computational efficiency of explicit last-stage diagonally implicit Runge–Kutta methods (ELDIRK) for the adaptive solution of phase-field problems,”10.1016/j.cma.2023.116545__Computer Methods in Applied Mechanics and Engineering, vol. 418, Art. no. 116545, 2023, doi:10.1016/j.cma.2023.116545 .

S. Diederich, A. Iseke, K. Pull, and M. Schneider, “Role (in-)congruity and the Catch 22 for female executives: how stereotyping contributes to the gender pay gap at top executive level,”10.1080/09585192.2023.2273331__The International Journal of Human Resource Management, pp. 1–29, 2023, doi:10.1080/09585192.2023.2273331 .

T. Gburrek, J. Schmalenstroeer, and R. Haeb-Umbach, “Spatial Diarization for Meeting Transcription with Ad-Hoc Acoustic Sensor Networks,” presented at the 57th Asilomar Conference on Signals, Systems, and Computers, 2023.

W. Reijers, “Technology and Civic Virtue,”10.1007/s13347-023-00669-w__Philosophy &;amp; Technology, vol. 36, no. 4, Art. no. 71, 2023, doi:10.1007/s13347-023-00669-w .

S. Diederich, A. Iseke, K. Pull, and M. Schneider, “Role (in-)congruity and the Catch 22 for female executives: how stereotyping contributes to the gender pay gap at top executive level,”10.1080/09585192.2023.2273331__The International Journal of Human Resource Management, pp. 1–29, 2023, doi:10.1080/09585192.2023.2273331 .

I. Gräßler, E. Bodden, D. Wiechel, and J. Pottebaum, “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security,”10.37544/0720-5953-2023-11-12-60__Konstruktion, vol. 75, no. 11–12, pp. 60–65, 2023, doi:10.37544/0720-5953-2023-11-12-60 .

K. Brennig and O. Müller, “More Isn’t Always Better – Measuring Customers’ Preferences for Digital Process Transparency,” presented at the  56th Hawaii International Conference on System Sciences, Lhain, 2023.

A. Wells, “Will do? Causes and volitions,”10.1007/s11016-023-00936-8__Metascience, 2023, doi:10.1007/s11016-023-00936-8 .

F. Fröde et al., Eds., Large eddy simulation of iron oxide formation in a laboratory spray flame. Elsevier, 2023.

B. Duderija et al., “Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation,”10.1016/j.jajp.2023.100181__Journal of Advanced Joining Processes, vol. 9, Art. no. 100181, 2023, doi:10.1016/j.jajp.2023.100181 .

M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,”10.3390/jmmp7040132__Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi:10.3390/jmmp7040132 .

T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,”10.3390/jmmp7050169__Journal of Manufacturing and Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi:10.3390/jmmp7050169 .

J. Göddecke, T. Göhrs, G. Meschut, and M. Große Gehling, “Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau,”10.1002/stab.202300031__Stahlbau, vol. 92, no. 8, pp. 508–519, 2023, doi:10.1002/stab.202300031 .

P. Wingertszahn et al., “Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme Pressures,”10.24053/tus-2023-0017__Tribologie und Schmierungstechnik, vol. 70, no. 4–5, pp. 5–12, 2023, doi:10.24053/tus-2023-0017 .

M. Tavana, A. Khalili Nasr, A. B. Ahmadabadi, A. S. Amiri, and H. Mina, “An interval multi-criteria decision-making model for evaluating blockchain-IoT technology in supply chain networks,”10.1016/j.iot.2023.100786__Internet of Things, vol. 22, Art. no. 100786, 2023, doi:10.1016/j.iot.2023.100786 .

R. Marín, F. J. Santos-Arteaga, M. Tavana, and D. Di Caprio, “Value Chain digitalization and technological development as innovation catalysts in small and medium-sized enterprises,”10.1016/j.jik.2023.100454__Journal of Innovation &; Knowledge, vol. 8, no. 4, Art. no. 100454, 2023, doi:10.1016/j.jik.2023.100454 .

F. J. Santos-Arteaga, D. Di Caprio, and M. Tavana, “A combinatorial data envelopment analysis with uncertain interval data with application to ICT evaluation,”10.1016/j.techfore.2023.122510__Technological Forecasting and Social Change, vol. 191, Art. no. 122510, 2023, doi:10.1016/j.techfore.2023.122510 .

A. Reitz, O. Grydin, and M. Schaper, “Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22Mn,”10.1016/j.msea.2022.142780__Materials Science and Engineering: A, vol. 838, Art. no. 142780, 2022, doi:10.1016/j.msea.2022.142780 .

C. Harteis, D. Gijbels, and E. Kyndt, Eds., Research Approaches on Workplace Learning. Cham: Springer International Publishing, 2022.

M. Goller and S. Paloniemi, “Agency: Taking Stock of Workplace Learning Research,” in Research Approaches on Workplace Learning, Cham: Springer International Publishing, 2022.

C. Harteis, “Research on Workplace Learning in Times of Digitalisation,” in Research Approaches on Workplace Learning, Cham: Springer International Publishing, 2022.

T. Riedl, V. S. Kunnathully, A. Trapp, T. Langer, D. Reuter, and J. K. N. Lindner, “SizeDependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars,”10.1002/admi.202102159__Advanced Materials Interfaces, Art. no. 2102159, 2022, doi:10.1002/admi.202102159 .

J. Huang et al., “Influence of hydrogel coatings on corrosion and fatigue of iron in simulated body fluid,”10.1002/maco.202112841__Materials and Corrosion, vol. 73, p. 1034, 2022, doi:10.1002/maco.202112841 .

T. Stallmeister and T. Tröster, “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding,”10.4028/p-5fxp53__Key Engineering Materials, vol. 926, pp. 1457–1467, 2022, doi:10.4028/p-5fxp53 .

K. Gevers, A. Tornede, M. D. Wever, V. Schöppner, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,”10.1007/s40194-022-01339-9__Welding in the World, 2022, doi:10.1007/s40194-022-01339-9 .

M. Raghuwanshi et al., “Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se            <sub>2</sub>            ThinFilm Solar Cells,”10.1002/adma.202203954__Advanced Materials, vol. 34, no. 37, Art. no. 2203954, 2022, doi:10.1002/adma.202203954 .

S. Harzheim, L. Ewenz, M. Zimmermann, and T. Wallmersperger, “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations,”10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes, vol. 6, Art. no. 100130, 2022, doi:10.1016/j.jajp.2022.100130 .

D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Robustness Analysis of Pin Joining,”10.3390/jmmp6050122__Journal of Manufacturing and Materials Processing, vol. 6, no. 5, Art. no. 122, 2022, doi:10.3390/jmmp6050122 .

A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,”10.3390/jmmp6060146__Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 146, 2022, doi:10.3390/jmmp6060146 .

D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,”10.3390/jmmp6060127__Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 127, 2022, doi:10.3390/jmmp6060127 .

D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined in situ CT and Acoustic Analysis during Clinching,”10.4028/p-32330d__in Key Engineering Materials, 2022, vol. 926, pp. 1489–1497, doi:10.4028/p-32330d .

S. Harzheim, M. Hofmann, and T. Wallmersperger, “Numerical fatigue life prediction of corroded and non-corroded clinched joints,”10.1080/15376494.2022.2140233__Mechanics of Advanced Materials and Structures, pp. 1–6, 2022, doi:10.1080/15376494.2022.2140233 .

M. Schneider et al., “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy,”10.1515/pm-2022-1018__Practical Metallography, vol. 59, no. 10, pp. 580–614, 2022, doi:10.1515/pm-2022-1018 .

M. Hanusch, “Regularity of Lie groups,”10.4310/cag.2022.v30.n1.a2__Communications in Analysis and Geometry, vol. 30, no. 1, pp. 53–152, 2022, doi:10.4310/cag.2022.v30.n1.a2 .

J.-P. Kucklick and O. Müller, “Tackling the Accuracy–Interpretability Trade-off: Interpretable Deep Learning Models for Satellite Image-based Real Estate Appraisal,”10.1145/3567430__ACM Transactions on Management Information Systems, 2022, doi:10.1145/3567430 .

C. Bartelheimer, P. zur Heiden, H. Lüttenberg, and D. Beverungen, “Systematizing the lexicon of platforms in information systems: a data-driven study,”10.1007/s12525-022-00530-6__Electronic Markets, vol. 32, no. 1, pp. 375–396, 2022, doi:10.1007/s12525-022-00530-6 .

T. Riedl, V. Kunnathully, A. Trapp, T. Langer, D. Reuter, and J. Lindner, “SizeDependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars,”10.1002/admi.202102159__Advanced Materials Interfaces, vol. 9, no. 11, Art. no. 2102159, 2022, doi:10.1002/admi.202102159 .

R. E. Hagengruber, “Du Châtelet and Kant: Claiming the Renewal of Philosophy,” in Époque Émilienne, Cham: Springer International Publishing, 2022.

R. E. Hagengruber, Ed., Époque Émilienne. Cham: Springer International Publishing, 2022.

C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints,”10.4028/p-5d009y__Key Engineering Materials, vol. 926, pp. 1516–1526, 2022, doi:10.4028/p-5d009y .

M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,”10.4028/p-wpuzyw__Key Engineering Materials, vol. 926, pp. 1564–1572, 2022, doi:10.4028/p-wpuzyw .

L. Schmelzle et al., “Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature,”10.1080/01694243.2022.2125714__Journal of Adhesion Science and Technology, 2022, doi:10.1080/01694243.2022.2125714 .

L. Hofeditz, S. Clausen, A. Rieß, M. Mirbabaie, and S. Stieglitz, “Applying XAI to an AI-based system for candidate management to mitigate bias and discrimination in hiring,”10.1007/s12525-022-00600-9__Electronic Markets (ELMA), 2022, doi:10.1007/s12525-022-00600-9 .

A. Henkes, H. Wessels, and R. Mahnken, “Physics informed neural networks for continuum micromechanics,”10.1016/j.cma.2022.114790__Computer Methods in Applied Mechanics and Engineering, vol. 393, Art. no. 114790, 2022, doi:10.1016/j.cma.2022.114790 .

M. Odziomek et al., “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor,”10.1002/adma.202206405__Advanced Materials, vol. 34, no. 40, Art. no. 2206405, 2022, doi:10.1002/adma.202206405 .

M. Jerigová et al., “C            <sub>1</sub>            N            <sub>1</sub>            Thin Films from Guanine Decomposition Fragments,”10.1002/admi.202202061__Advanced Materials Interfaces, Art. no. 2202061, 2022, doi:10.1002/admi.202202061 .

M. Odziomek et al., “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor,”10.1002/adma.202206405__Advanced Materials, vol. 34, no. 40, Art. no. 2206405, 2022, doi:10.1002/adma.202206405 .

L. Kothe, M. Albert, C. Meier, T. Wagner, and M. Tiemann, “Stimulation and Enhancement of NearBandEdge Emission in Zinc Oxide by Distributed Bragg Reflectors,”10.1002/admi.202102357__Advanced Materials Interfaces, Art. no. 2102357, 2022, doi:10.1002/admi.202102357 .

C. Weinberger et al., “The Structure of Water in Silica Mesopores – Influence of the Pore Wall Polarity,”10.1002/admi.202200245__Advanced Materials Interfaces, vol. 9, no. 20, Art. no. 2200245, 2022, doi:10.1002/admi.202200245 .

G. Meschut et al., “Review on mechanical joining by plastic deformation,”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:10.1016/j.jajp.2022.100113 .

G. Meschut et al., “Review on mechanical joining by plastic deformation,”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:10.1016/j.jajp.2022.100113 .

C. Wischer and W. Homberg, “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints,”10.4028/p-1n6741__Key Engineering Materials, vol. 926, pp. 1468–1478, 2022, doi:10.4028/p-1n6741 .

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase,”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, Art. no. 100135, 2022, doi:10.1016/j.jajp.2022.100135 .

G. Kullmer, D. Weiß, and B. Schramm, “Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method,”10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, Art. no. 108899, 2022, doi:10.1016/j.engfracmech.2022.108899 .

X. Ju, R. Mahnken, Y. Xu, and L. Liang, “NTFA-enabled goal-oriented adaptive space–time finite elements for micro-heterogeneous elastoplasticity problems,”10.1016/j.cma.2022.115199__Computer Methods in Applied Mechanics and Engineering, vol. 398, Art. no. 115199, 2022, doi:10.1016/j.cma.2022.115199 .

R. Mahnken, “New low order Runge–Kutta schemes for asymptotically exact global error estimation of embedded methods without order reduction,”10.1016/j.cma.2022.115553__Computer Methods in Applied Mechanics and Engineering, vol. 401, Art. no. 115553, 2022, doi:10.1016/j.cma.2022.115553 .

F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming,”10.4028/p-3rk19y__Key Engineering Materials, vol. 926, pp. 683–689, 2022, doi:10.4028/p-3rk19y .

B. Schramm and D. Weiß, “Fracture mechanical evaluation of the material HX,”10.1515/mt-2022-0191__Materials Testing, vol. 64, no. 10, pp. 1437–1449, 2022, doi:10.1515/mt-2022-0191 .

D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,”10.1080/09243046.2022.2143746__Advanced Composite Materials, pp. 1–16, 2022, doi:10.1080/09243046.2022.2143746 .

A. Reitz, O. Grydin, and M. Schaper, “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel,”10.1007/s11661-022-06732-z__Metallurgical and Materials Transactions A, vol. 53, no. 8, pp. 3125–3142, 2022, doi:10.1007/s11661-022-06732-z .

M. Slapáková et al., “The influence of surface on direction of diffusion in Al-Fe clad material,”10.1016/j.matchar.2022.112005__Materials Characterization, vol. 190, Art. no. 112005, 2022, doi:10.1016/j.matchar.2022.112005 .

A. Reitz, O. Grydin, and M. Schaper, “Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22Mn,”10.1016/j.msea.2022.142780__Materials Science and Engineering: A, vol. 838, Art. no. 142780, 2022, doi:10.1016/j.msea.2022.142780 .

W. Tillmann et al., “Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications,”10.1016/j.matlet.2022.132384__Materials Letters, Art. no. 132384, 2022, doi:10.1016/j.matlet.2022.132384 .

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .

S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications,”10.1016/j.msea.2022.143887__Materials Science and Engineering: A, vol. 854, Art. no. 143887, 2022, doi:10.1016/j.msea.2022.143887 .

W. Tillmann et al., “Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications,”10.1016/j.matlet.2022.132384__Materials Letters, vol. 321, Art. no. 132384, 2022, doi:10.1016/j.matlet.2022.132384 .

S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications,”10.1016/j.msea.2022.143887__Materials Science and Engineering: A, vol. 854, Art. no. 143887, 2022, doi:10.1016/j.msea.2022.143887 .

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,”10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes, vol. 6, Art. no. 100133, 2022, doi:10.1016/j.jajp.2022.100133 .

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,”10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, Art. no. 100134, 2022, doi:10.1016/j.jajp.2022.100134 .

J. Rozo Vasquez et al., “Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming,”10.1515/pm-2022-0064__Practical Metallography, vol. 59, no. 11, pp. 660–675, 2022, doi:10.1515/pm-2022-0064 .

L. Kersting, B. Arian, J. R. Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes,”10.4028/p-yp2hj3__Key Engineering Materials, vol. 926, pp. 862–874, 2022, doi:10.4028/p-yp2hj3 .

T. Stallmeister and T. Tröster, “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding,”10.4028/p-5fxp53__Key Engineering Materials, vol. 926, pp. 1457–1467, 2022, doi:10.4028/p-5fxp53 .

H. Ahmed et al., “Multichannel Superposition of Grafted Perfect Vortex Beams,”10.1002/adma.202203044__Advanced Materials, vol. 34, no. 30, Art. no. 2203044, 2022, doi:10.1002/adma.202203044 .

J. Cresson and K. Hariz-Belgacem, “About the structure of the discrete and continuous Eringen’s nonlocal elastica,”10.1177/10812865221108094__Mathematics and Mechanics of Solids, Art. no. 108128652211080, 2022, doi:10.1177/10812865221108094 .

J. Cresson and K. Hariz Belgacem, “About the structure of the discrete and continuous Eringen’s nonlocal elastica,”10.1177/10812865221108094__Mathematics and Mechanics of Solids, Art. no. 108128652211080, 2022, doi:10.1177/10812865221108094 .

S. Alavi, E. Böhm, J. Habel, J. Wieseke, C. Schmitz, and F. Brüggemann, “The ambivalent role of monetary sales incentives in service innovation selling,”10.1111/jpim.12600__Journal of Product Innovation Management, vol. 39, no. 3, pp. 445–463, 2022, doi:10.1111/jpim.12600 .

C. Marschalt et al., “Far-field Calculation from magnetic Huygens Box Data using the Boundary Element Method,”10.1109/ssi56489.2022.9901431__presented at the 2022 Smart Systems Integration (SSI), Grenoble, France, 2022, doi:10.1109/ssi56489.2022.9901431 .

S. Strohmeier, J. Collet, and R. Kabst, “(How) do advanced data and analyses enable HR analytics success? A neo-configurational analysis,”10.1108/bjm-05-2021-0188__Baltic Journal of Management, vol. 17, no. 3, pp. 285–303, 2022, doi:10.1108/bjm-05-2021-0188 .

J. Hälterlein, “Technological Expectations and the Making of Europe,”10.23987/sts.110036__Science &; Technology Studies, vol. 36, no. 2, pp. 26–46, 2022, doi:10.23987/sts.110036 .