Althoff, Simon. Predicting the Bond Quality of Heavy Copper Wire Bonds Using a Friction Model Approach. Vol. 15. Schriften Des Lehrstuhls Für Dynamik Und Mechatronik. Shaker, 2023.
LibreCat: /record/41971

Borgert, Thomas, and Werner Homberg. “Analysis of Temperature Effect on Strength and Microstructure in Friction Induced Recycling Process (FIRP).”https://doi.org/10.21741/9781644902479-211__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902479-211 .
LibreCat: /record/44036
DOI: 10.21741/9781644902479-211

Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut. “Influence of the Rivet Coating on the Friction during Self-Piercing Riveting.”https://doi.org/10.4028/www.scientific.net/KEM.883.11__Key Engineering Materials 883 (2021): 11–18.https://doi.org/10.4028/www.scientific.net/KEM.883.11 .
LibreCat: /record/22272
DOI: 10.4028/www.scientific.net/KEM.883.11

Schemmel, Reinhard, Viktor Krieger, Tobias Hemsel, and Walter Sextro. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.”https://doi.org/10.1016/j.microrel.2021.114077__Microelectronics Reliability 119 (2021): 114077.https://doi.org/10.1016/j.microrel.2021.114077 .
LibreCat: /record/21436
DOI: https://doi.org/10.1016/j.microrel.2021.114077

Schemmel, Reinhard, Tobias Hemsel, Collin Dymel, Matthias Hunstig, Michael Brökelmann, and Walter Sextro. “Using Complex Multi-Dimensional Vibration Trajectories in Ultrasonic Bonding and Welding.”https://doi.org/10.1016/j.sna.2019.04.025__Sensors and Actuators A: Physical 295 (2019): 653–62.https://doi.org/10.1016/j.sna.2019.04.025 .
LibreCat: /record/10334
DOI: 10.1016/j.sna.2019.04.025

Schulte, Frank, Jan Neuhaus, and Walter Sextro. “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties.” In Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 1109–17, 2015.
LibreCat: /record/9952

Althoff, Simon, Jan Neuhaus, Tobias Hemsel, and Walter Sextro. “Improving the Bond Quality of Copper Wire Bonds Using a Friction Model Approach.”https://doi.org/10.1109/ECTC.2014.6897500__In Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 1549–55, 2014.https://doi.org/10.1109/ECTC.2014.6897500 .
LibreCat: /record/9868
DOI: 10.1109/ECTC.2014.6897500

Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “High-Velocity Operation of Piezoelectric Inertia Motors: Experimental Validation.”https://doi.org/10.1007/s00419-014-0940-0__Archive of Applied Mechanics, 2014, 1–9.https://doi.org/10.1007/s00419-014-0940-0 .
LibreCat: /record/9876
DOI: 10.1007/s00419-014-0940-0

Frölich, D., Balázs Magyar, and B. Sauer. “A Comprehensive Model of Wear, Friction and Contact Temperature in Radial Shaft Seals.”https://doi.org/10.1016/j.wear.2013.12.030__Wear 311, no. 1 (2014): 71–80.https://doi.org/10.1016/j.wear.2013.12.030 .
LibreCat: /record/34442
DOI: https://doi.org/10.1016/j.wear.2013.12.030

Althoff, Simon, Jan Neuhaus, Tobias Hemsel, and Walter Sextro. “A Friction Based Approach for Modeling Wire Bonding.”https://doi.org/10.4071/isom-2013-TA67__In IMAPS 2013, 46th International Symposium on Microelectronics. Orlando (Florida), USA, 2013.https://doi.org/10.4071/isom-2013-TA67 .
LibreCat: /record/9797
DOI: 10.4071/isom-2013-TA67

Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Modelling the Friction Contact in an Inertia Motor.”https://doi.org/10.1177/1045389X12474354__Journal of Intelligent Material Systems and Structures 24, no. 11 (2013): 1380–91.https://doi.org/10.1177/1045389X12474354 .
LibreCat: /record/9803
DOI: 10.1177/1045389X12474354

Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “An Efficient Simulation Technique for High-Frequency Piezoelectric Inertia Motors.”https://doi.org/10.1109/ULTSYM.2012.0068__In Ultrasonics Symposium (IUS), 2012 IEEE International, 277–80, 2012.https://doi.org/10.1109/ULTSYM.2012.0068 .
LibreCat: /record/9784
DOI: 10.1109/ULTSYM.2012.0068

Tomberger, Christoph, Peter Dietmaier, Walter Sextro, and Klaus Six. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.”https://doi.org/10.1016/j.wear.2010.10.025__Wear 271 (2011): 2–12.https://doi.org/10.1016/j.wear.2010.10.025 .
LibreCat: /record/9772
DOI: 10.1016/j.wear.2010.10.025

Götting, Florian, Walter Sextro, Lars Panning, and Karl Popp. “Systematic Mistuning of Bladed Disk Assemblies with Friction Contacts.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 6:257–67, 2004.
LibreCat: /record/8952

Hemsel, Tobias, and Jörg Wallaschek. “State of the Art and Development Trends of Ultrasonic Linear Motors.”https://doi.org/10.1109/ULTSYM.2000.922635__In Ultrasonics Symposium, 2000 IEEE, 1:663–66 vol.1, 2000.https://doi.org/10.1109/ULTSYM.2000.922635 .
LibreCat: /record/8915
DOI: 10.1109/ULTSYM.2000.922635