S. Althoff, Predicting the Bond Quality of Heavy Copper Wire Bonds using a Friction Model Approach, vol. 15. Shaker, 2023.

T. Borgert and W. Homberg, “Analysis of temperature effect on strength and microstructure in friction induced recycling process (FIRP),”10.21741/9781644902479-211__presented at the ESAFORM 2023, Kraków, 2023, doi:10.21741/9781644902479-211 .

B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Influence of the Rivet Coating on the Friction during Self-Piercing Riveting,”10.4028/www.scientific.net/KEM.883.11__Key Engineering Materials, vol. 883, pp. 11–18, 2021, doi:10.4028/www.scientific.net/KEM.883.11 .

R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,”https://doi.org/10.1016/j.microrel.2021.114077__Microelectronics Reliability, vol. 119, p. 114077, 2021, doi:https://doi.org/10.1016/j.microrel.2021.114077 .

R. Schemmel, T. Hemsel, C. Dymel, M. Hunstig, M. Brökelmann, and W. Sextro, “Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding,”10.1016/j.sna.2019.04.025__Sensors and Actuators A: Physical, vol. 295, pp. 653–662, 2019, doi:10.1016/j.sna.2019.04.025 .

F. Schulte, J. Neuhaus, and W. Sextro, “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties,” in Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–1117.

S. Althoff, J. Neuhaus, T. Hemsel, and W. Sextro, “Improving the bond quality of copper wire bonds using a friction model approach,” in Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–1555.

M. Hunstig, T. Hemsel, and W. Sextro, “High-velocity operation of piezoelectric inertia motors: experimental validation,” Archive of Applied Mechanics, pp. 1–9, 2014.

D. Frölich, B. Magyar, and B. Sauer, “A comprehensive model of wear, friction and contact temperature in radial shaft seals,”https://doi.org/10.1016/j.wear.2013.12.030__Wear, vol. 311, no. 1, pp. 71–80, 2014, doi:https://doi.org/10.1016/j.wear.2013.12.030 .

S. Althoff, J. Neuhaus, T. Hemsel, and W. Sextro, “A friction based approach for modeling wire bonding,” in IMAPS 2013, 46th International Symposium on Microelectronics, 2013.

M. Hunstig, T. Hemsel, and W. Sextro, “Modelling the friction contact in an inertia motor,” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, pp. 1380–1391, 2013.

M. Hunstig, T. Hemsel, and W. Sextro, “An efficient simulation technique for high-frequency piezoelectric inertia motors,” in Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 277–280.

C. Tomberger, P. Dietmaier, W. Sextro, and K. Six, “Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature,” Wear, vol. 271, pp. 2–12, 2011.

F. Götting, W. Sextro, L. Panning, and K. Popp, “Systematic mistuning of bladed disk assemblies with friction contacts,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2004, vol. 6, no. -53310, pp. 257–267.

T. Hemsel and J. Wallaschek, “State of the art and development trends of ultrasonic linear motors,” in Ultrasonics Symposium, 2000 IEEE, 2000, vol. 1, pp. 663–666 vol.1.