Slapáková, Michaela, et al. “D-Structure of Intermetallic Interface Layer in Al–Steel Clad Material.”10.1016/j.vacuum.2023.112043__Vacuum, vol. 212, 112043, Elsevier BV, 2023, doi:10.1016/j.vacuum.2023.112043.
LibreCat: /record/43441
DOI: 10.1016/j.vacuum.2023.112043

Grenz, Julian, et al. “Integrating Prospective LCA in the Development of Automotive Components.”10.3390/su151310041__Sustainability, vol. 15, no. 13, 10041, MDPI AG, 2023, doi:10.3390/su151310041.
LibreCat: /record/45782
DOI: 10.3390/su151310041

Kowatz, Jannik, et al. “Experimental Failure Analysis of Adhesively Bonded Steel/CFRP Joints under Quasi-Static and Cyclic Tensile-Shear and Peel Loading.”10.1016/j.ijadhadh.2021.102851__International Journal of Adhesion and Adhesives, vol. 107, 102851, Elsevier, 2021, doi:10.1016/j.ijadhadh.2021.102851.
LibreCat: /record/21549
DOI: 10.1016/j.ijadhadh.2021.102851

Uhe, Benedikt, et al. “Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening.”10.1007/978-3-030-75381-8_124__Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals &; Materials Series., edited by Glenn Daehn et al., Springer, 2021, pp. 1495–506, doi:10.1007/978-3-030-75381-8_124.
LibreCat: /record/22930
DOI: 10.1007/978-3-030-75381-8_124

Uhe, Benedikt, et al. Strength of Self-Piercing Riveted Joints with Conventional Rivets and Rivets Made of High Nitrogen Steel. 2021, doi:10.25518/esaform21.1911.
LibreCat: /record/22274
DOI: 10.25518/esaform21.1911

Arian, Bahman, et al. Forming of Metastable Austenitic Stainless Steel Tubes with Axially Graded Martensite Content by Flow-Forming. ULiège Library, 2021.
LibreCat: /record/23465

Kuball, Clara-Maria, et al., editors. Process Design for the Forming of Semi-Tubular Self-Piercing Rivets Made of High Nitrogen Steel. Vol. 50, 2020, pp. 280–85, doi:10.1016/j.promfg.2020.08.052.
LibreCat: /record/19976
DOI: 10.1016/j.promfg.2020.08.052

Kuball, Clara-Maria, et al., editors. Influence of the Process Temperature on the Forming Behaviour and the Friction during Bulk Forming of High Nitrogen Steel. 100023, 2020, doi:10.1016/j.jajp.2020.100023.
LibreCat: /record/19974
DOI: 10.1016/j.jajp.2020.100023

Uhe, Benedikt, et al. “Improvement of a Rivet Geometry for the Self-Piercing Riveting of High-Strength Steel and Multi-Material Joints.”10.1007/s11740-020-00973-w__Production Engineering, vol. 14, 2020, pp. 417–23, doi:10.1007/s11740-020-00973-w.
LibreCat: /record/19973
DOI: 10.1007/s11740-020-00973-w

Frölich, D., et al. “Investigation of Wear Resistance of Dry and Cryogenic Turned Metastable Austenitic Steel Shafts and Dry Turned and Ground Carburized Steel Shafts in the Radial Shaft Seal Ring System.”https://doi.org/10.1016/j.wear.2015.02.004__Wear, vol. 328–329, 2015, pp. 123–31, doi:https://doi.org/10.1016/j.wear.2015.02.004.
LibreCat: /record/34441
DOI: https://doi.org/10.1016/j.wear.2015.02.004