Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”https://doi.org/10.1002/masy.202200181__Macromolecular Symposia 411, no. 1 (2023).https://doi.org/10.1002/masy.202200181 .

Moritzer, Elmar, Felix Hecker, Felix Knaup, and Julian Wächter. “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process.”https://doi.org/10.1063/5.0168548__In Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), 170001-1-170001–5. Fukuoka (Japan): AIP Publishing, 2023.https://doi.org/10.1063/5.0168548 .

Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”https://doi.org/10.1002/masy.202200181__Macromolecular Symposia 411, no. 1 (2023).https://doi.org/10.1002/masy.202200181 .

Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.”https://doi.org/10.26153/tsw/44657__In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 2011–18, 2022.https://doi.org/10.26153/tsw/44657 .

Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.”https://doi.org/10.26153/tsw/44654__In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 1844–58, 2022.https://doi.org/10.26153/tsw/44654 .

Moritzer, Elmar, Felix Hecker, and André Hirsch. “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen.” Kunststoffland NRW report, 2021.

Moritzer, Elmar, Felix Hecker, and André Hirsch. “Kleine Tropfen, große Wirkung.” Kunststoffe, 2021.

Moritzer, Elmar, and Felix Hecker. “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen.” Jahresmagazin Kunststofftechnik, 2021.

Moritzer, Elmar, Felix Hecker, Christian Lennart Elsner, and André Hirsch. “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming.” In Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36). Conference Proceedings, n.d.

Moritzer, Elmar, Felix Hecker, Christian Lennart Elsner, and André Hirsch. “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components.”https://doi.org/10.26153/tsw/17567__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 467–74, 2021.https://doi.org/10.26153/tsw/17567 .

Moritzer, Elmar, Felix Hecker, Christine Driediger, and André Hirsch. “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling.”https://doi.org/10.26153/tsw/17577__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 575–84, 2021.https://doi.org/10.26153/tsw/17577 .

Moritzer, Elmar, Felix Hecker, and André Hirsch. “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming.”https://doi.org/10.26153/tsw/17643__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 1268–75, 2021.https://doi.org/10.26153/tsw/17643 .

Moritzer, Elmar, André Hirsch, and Felix Hecker. “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components.”http://dx.doi.org/10.26153/tsw/17308__In 30th Annual International Solid Freeform Fabrication Symposium, 30:705–14, 2019.http://dx.doi.org/10.26153/tsw/17308 .