W. Kirchgässner, O. Wallscheid, and J. Böcker, “Estimating Electric Motor Temperatures with Deep Residual Machine Learning,”10.1109/tpel.2020.3045596__IEEE Transactions on Power Electronics, vol. 36, no. 7, pp. 7480–7488, 2020, doi:10.1109/tpel.2020.3045596 .
LibreCat: /record/21250
DOI: 10.1109/tpel.2020.3045596

R. Unruh, F. Schafmeister, and J. Böcker, “Evaluation of MMCs for High-Power Low-Voltage DC-Applications in Combination with the Module LLC-Design,”10.23919/epe20ecceeurope43536.2020.9215687__presented at the 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe), Lyon, France, 2020, doi:10.23919/epe20ecceeurope43536.2020.9215687 .
LibreCat: /record/29939
DOI: 10.23919/epe20ecceeurope43536.2020.9215687

P. Rehlaender, S. Tikhonov, F. Schafmeister, and J. Böcker, “Dual Interleaved 3.6 kW LLC Converter Operating in Half-Bridge, Full-Bridge and Phase-Shift Mode as a Single-Stage Architecture of an Automotive On-Board DC-DC Converter,”10.23919/epe20ecceeurope43536.2020.9215736__2020, doi:10.23919/epe20ecceeurope43536.2020.9215736 .
LibreCat: /record/29894
DOI: 10.23919/epe20ecceeurope43536.2020.9215736

A. Brosch, S. Hanke, O. Wallscheid, and J. Böcker, “Data-Driven Recursive Least Squares Estimation for Model Predictive Current Control of Permanent Magnet Synchronous Motors,”10.1109/tpel.2020.3006779__IEEE Transactions on Power Electronics, pp. 2179–2190, 2020, doi:10.1109/tpel.2020.3006779 .
LibreCat: /record/21558
DOI: 10.1109/tpel.2020.3006779

K. S. C. Stille, D. Weber, J. Lange, T. Vogt, O. Wallscheid, and J. Böcker, “Emulation of Microgrids for Research and Validation of Control and Operation Strategies,”10.1109/speedam48782.2020.9161971__presented at the SPEEDAM, Sorrent, Italy, 2020, doi:10.1109/speedam48782.2020.9161971 .
LibreCat: /record/29956
DOI: 10.1109/speedam48782.2020.9161971

P. Rehlaender, T. Grote, S. Tikhonov, S. Mario, F. Schafmeister, and J. Böcker, “A 3,6 kW Single-Stage LLC Converter Operating in Half-Bridge, Full-Bridge and Phase-Shift Mode for Automotive Onboard DC-DC Conversion,” presented at the Power Conversion and Intelligent Motion (PCIM), Nürnberg, 2020.
LibreCat: /record/29896

T. Rüschenbaum, P. Rehlaender, P. Ha, T. Grote, F. Schafmeister, and J. Böcker, “Two-Stage Automotive DC-DC Converter Design with Wide Voltage-Transfer Range Utilizing Asymmetric LLC Operation,” presented at the PCIM Europe digital days 2020, 2020.
LibreCat: /record/29898

D. Urbaneck, P. Rehlaender, F. Schafmeister, and J. Böcker, “LLC Converter Design in Capacitive Operation utilizes ZCS for IGBTs – a Concept Study for a 2.2 kW Automotive DC-DC Stage,” presented at the Power Conversion and Intelligent Motion (PCIM), Nürnberg, 2020.
LibreCat: /record/29874

M. Stender, O. Wallscheid, and J. Böcker, “Comparison of Gray-Box and Black-Box Two-Level Three-Phase Inverter Models for Electrical Drives,”10.1109/tie.2020.3018060__IEEE Transactions on Industrial Electronics, vol. 68, no. 9, pp. 8646–8656, 2020, doi:10.1109/tie.2020.3018060 .
LibreCat: /record/30033
DOI: 10.1109/tie.2020.3018060

M. Stender, O. Wallscheid, and J. Böcker, “Accurate Torque Estimation for Induction Motors by Utilizing Globally Optimized Flux Observers,”10.1109/speedam48782.2020.9161955__2020, doi:10.1109/speedam48782.2020.9161955 .
LibreCat: /record/30036
DOI: 10.1109/speedam48782.2020.9161955

H. Bode, S. Heid, D. Weber, E. Hüllermeier, and O. Wallscheid, “Towards a Scalable and Flexible Simulation and Testing Environment   Toolbox for Intelligent Microgrid Control,” arXiv:2005.04869. 2020.
LibreCat: /record/21623

E. Ficara and F. d’Agostini, “Perché celebrare Hegel? La sua dialettica è un brand, il suo pensiero una febbre benefica,” La Stampa, 2020.
LibreCat: /record/30180

E. Ficara, “Lebanidze, Giorgi, Hegel’s Transcendental Ontology, New York 2019,” Journal of the History of Philosophy. pp. 825–826, 2020.
LibreCat: /record/30164

E. Ficara, “Was ist die transzendentale Deduktion der Kategorien?,” in Die Kategoriendeduktion in der Klassischen Deutschen Philosophie, R. Schäfer, Ed. Berlin: Duncker &; Humblot, 2020, pp. 17–28.
LibreCat: /record/30139

E. Ficara and F. d’Agostini, “The Blushing Liar ,” Philosophia , vol. 21, no. 2, pp. 252–266, 2020.
LibreCat: /record/30096

E. Ficara, “Truth and Incompatibility,” in Reading Brandom. On A Spirit of Trust, G. Bouché, Ed. London: Routledge, 2020, pp. 29–40.
LibreCat: /record/30095

S. Heid, D. Weber, H. Bode, E. Hüllermeier, and O. Wallscheid, “OMG: A scalable and flexible simulation and testing environment toolbox for intelligent microgrid control,” Journal of Open Source Software, vol. 5, no. 54, p. 2435, 2020.
LibreCat: /record/29649

H. Bode, S. Heid, D. Weber, E. Hüllermeier, and O. Wallscheid, “Towards a scalable and flexible simulation and testing environment toolbox for intelligent microgrid control,” arXiv preprint arXiv:2005.04869, 2020.
LibreCat: /record/29644

E. G. Gedlu, O. Wallscheid, and J. Böcker, “Permanent magnet synchronous machine temperature estimation using low-order lumped-parameter thermal network with extended iron loss model,” in The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020), 2020, vol. 2020, pp. 937–942.
LibreCat: /record/29641

M. Illian, S. Althoff, and H. Karl, “A Process to Develop Lean Big-Data Platform Architectures for Industrial Manufacturing Contexts,”10.1109/etfa46521.2020.9212006__2020, doi:10.1109/etfa46521.2020.9212006 .
LibreCat: /record/30211
DOI: 10.1109/etfa46521.2020.9212006

S. Wiesenmayer et al., “Berücksichtigung der Herstellungshistorie von Blechbauteilen beim Fügen durch Umformen,”http://dx.doi.org/10.37544/1436-4980-2020-10-33__Werkstattstechnik Online, vol. 110, no. 10, pp. 677–683, 2020, doi:http://dx.doi.org/10.37544/1436-4980-2020-10-33 .
LibreCat: /record/20354
DOI: http://dx.doi.org/10.37544/1436-4980-2020-10-33

H. Schmitz and M. A. StrokaWetsch, “Determinants of nursing home choice: Does reported quality matter?,”10.1002/hec.4018__Health Economics, vol. 29, no. 7, pp. 766–777, 2020, doi:10.1002/hec.4018 .
LibreCat: /record/30234
DOI: 10.1002/hec.4018

H. Schmitz and M. A. StrokaWetsch, “Determinants of nursing home choice: Does reported quality matter?,”10.1002/hec.4018__Health Economics, vol. 29, no. 7, pp. 766–777, 2020, doi:10.1002/hec.4018 .
LibreCat: /record/30233
DOI: 10.1002/hec.4018

K. Thommes et al., “Trust development in care robots by opinion leader in the society,”10.4017/gt.2020.19.s.70024.4__Gerontechnology, 2020, doi:10.4017/gt.2020.19.s.70024.4 .
LibreCat: /record/21128
DOI: 10.4017/gt.2020.19.s.70024.4

C. Goldbach, C. Hoffmann, J. A. Hoppe, T. Pitz, and K. Thommes, “The fast and the furious—An experimental investigation of the pace of life and risky speed choice in traffic,”https://doi.org/10.1371/journal.pone.0236589__PloS ONE, vol. 15, no. 7, 2020, doi:https://doi.org/10.1371/journal.pone.0236589 .
LibreCat: /record/17854
DOI: https://doi.org/10.1371/journal.pone.0236589

C. Hoffmann and K. Thommes, “Using loss aversion to incentivize energy efficiency in a principal agent context - Evidence from a field experiment,”https://doi.org/10.1016/j.econlet.2020.108984__Economics Letters, vol. 189, no. 108984, 2020, doi:https://doi.org/10.1016/j.econlet.2020.108984 .
LibreCat: /record/17363
DOI: https://doi.org/10.1016/j.econlet.2020.108984

C. Hoffmann and K. Thommes, “Combining Egalitarian and Proportional Sharing rules in Team Tournaments to Incentivize Energy-Efficient Behavior in a Principal-Agent Context,”https://doi.org/10.1177%2F1086026620945343__Organization &; Environment, 2020, doi:https://doi.org/10.1177%2F1086026620945343 .
LibreCat: /record/17853
DOI: https://doi.org/10.1177%2F1086026620945343

S. Pekkarinen et al., “Embedding care robots into society and practice: Socio-technical considerations,”https://doi.org/10.1016/j.futures.2020.102593__Futures, vol. 122, 2020, doi:https://doi.org/10.1016/j.futures.2020.102593 .
LibreCat: /record/17857
DOI: https://doi.org/10.1016/j.futures.2020.102593

F. Dallmeier et al., “Forward-Secure 0-RTT Goes Live: Implementation and Performance Analysis in QUIC,”10.1007/978-3-030-65411-5_11__in Cryptology and Network Security, Vienna, 2020, pp. 211–231, doi:10.1007/978-3-030-65411-5_11 .
LibreCat: /record/28997
DOI: 10.1007/978-3-030-65411-5_11

M. E. Ahmmad, F. Schafmeister, and J. Böcker, “Practical Implementation and Verification of Simple-to-Implement Digital Current Observer for Half-Bridge Topologies,” presented at the IEEE International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM 20 digital days), Nuremberg, Germany, 2020.
LibreCat: /record/30339

F. Schafmeister, “Apparatus and method for charging an electric battery vehicle.” 2020.
LibreCat: /record/30362

R. Tischendorf et al., “Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames,” presented at the 4th International Symposium GasPhase Synthesis of Functional Nanomaterials, Duisburg, 2020.
LibreCat: /record/25062

O. Wallscheid and E. F. B. Ngoumtsa, “Investigation of disturbance observers for model predictive current control in electric drives,” IEEE Transactions on Power Electronics, vol. 35, no. 12, pp. 13563–13572, 2020.
LibreCat: /record/29643

S. Hanke, O. Wallscheid, and J. Böcker, “Data Set Description: Identifying the Physics Behind an Electric Motor–Data-Driven Learning of the Electrical Behavior (Part II),” arXiv preprint arXiv:2003.06268, 2020.
LibreCat: /record/29642

W. Kirchgässner, O. Wallscheid, and J. Böcker, “Data-Driven Permanent Magnet Temperature Estimation in Synchronous Motors with Supervised Machine Learning,” arXiv preprint arXiv:2001.06246, 2020.
LibreCat: /record/29640

C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038 .
LibreCat: /record/20678
DOI: https://doi.org/10.1016/j.jajp.2020.100038

V. Peckhaus, “Logik,” in Gottfried Wilhelm Leibniz. Rezeption, Forschung, Ausblick, F. Beiderbeck, W. Li, and S. Waldhoff, Eds. Stuttgart: Steiner Verlag, 2020, pp. 537–547.
LibreCat: /record/17638

V. Peckhaus, “Zermelo ,” in Neue Deutsche Biographie, Berlin: Duncker &; Humblot.
LibreCat: /record/17752

S. Sadeghi-Kohan and S. Hellebrand, Dynamic Multi-Frequency Test Method for Hidden Interconnect Defects. Ludwigsburg: 32. Workshop “Testmethoden und Zuverlässigkeit von Schaltungen und Systemen” (TuZ’20), 16. - 18. Februar 2020, 2020.
LibreCat: /record/15419

P. zur Heiden, “Considering Context in Design Science Research: A Systematic Literature Review,”10.1007/978-3-030-64823-7_21__2020, doi:10.1007/978-3-030-64823-7_21 .
LibreCat: /record/20706
DOI: 10.1007/978-3-030-64823-7_21

V. Peckhaus, “Kurt Gödel, Collected Works, Vol. IV: Correspondence A–G, Vol. V: Correspondence H. Ed. by Solomon Feferman et al. Oxford: Clarendon Press 2003,” Historia Mathematica, vol. 50. pp. 87–90, 2020.
LibreCat: /record/17816

V. Peckhaus, “The Mathematical World of Charles L. Dodgson (Lewis Carroll). Edited by Robin Wilson and Amirouche Moktefi. Oxford University Press: Oxford 2019,” British Journal for the History of Mathematics, vol. 35. pp. 175–177, 2020.
LibreCat: /record/17818

V. Peckhaus, “The Continued Exercise of Reason. Public Addresses by George Boole. Edited by Brendan Dooley. The MIT Press: Cambridge, Mass. and London, Engl. 2018,” Isis. .
LibreCat: /record/17817

M. Kastein, “Conference Report on the Digital Congress of the German Sociological Association: ‘Society under Pressure,’” 2020.
LibreCat: /record/24454

v. A. Alemann, J. Gruhlich, I. Horwath, and L. Weber, Eds., The Digitalization of Labour from a Gender Perspective. 2020.
LibreCat: /record/24452

V. Peckhaus, “Grußwort,” in Verleihung der Ehrendoktorwürde an Maria von Welser durch die Fakultät für Kulturwissenschaften der Universität Paderborn am 14. November 2019, vol. 155, Paderborn, 2020, pp. 3–4.
LibreCat: /record/17895

M. Otroshi, M. Rossel, and G. Meschut, “Stress state dependent damage modeling of self-pierce riveting process simulation using GISSMO damage model,”10.1016/j.jajp.2020.100015__Journal of Advanced Joining Processes, vol. 1, 2020, doi:10.1016/j.jajp.2020.100015 .
LibreCat: /record/20143
DOI: 10.1016/j.jajp.2020.100015

J. Troschitz, J. Vorderbrüggen, R. Kupfer, M. Gude, and G. Meschut, Eds., Joining of Thermoplastic Composites with Metals Using Resistance Element Welding. MDPI, 2020.
LibreCat: /record/20119
DOI: 10.3390/app10207251

S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids,” presented at the 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany, 2020.
LibreCat: /record/16930

T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method,”10.3390/jcs4030143__Journal of Composites Science, Art. no. 143, 2020, doi:10.3390/jcs4030143 .
LibreCat: /record/20842
DOI: 10.3390/jcs4030143