Schindlmayr, A., &; Scheffler, M. (2007). Quasiparticle calculations for point defects at semiconductor surfaces. In D. A. Drabold &; S. K. Estreicher (Eds.), Theory of Defects in Semiconductors (Vol. 104, pp. 165–192). Berlin, Heidelberg: Springer.https://doi.org/10.1007/11690320_8 

Sohler, C., &; Czumaj, A. (2007). On Testable Properties in Bounded Degree Graphs. In Proceedings of the 17th ACM-SIAM Symposium on Discrete Algorithms (SODA’07) (pp. 494–501).

Sohler, C., &; Lammersen, C. (2007). StrSort Algorithms for Geometric Problems. In Proceedings of the 23rd European Workshop on Computational Geometry (EWCG) (pp. 69–72).

Sohler, C., &; Czumaj, A. (2007). Testing Expansion in Bounded-Degree Graphs. In Proceedings of the 48th Annual IEEE Symposium on Foundations of Computer Science (FOCS) (pp. 570–578).

Sohler, C., &; Czumaj, A. (2007). Small Space Representations for Metric Min-Sum k-Clustering and their Applications. In Proceedings of the 24th International Symposium on Theoretical Aspects of Computer Science (STACS’07) (pp. 536–548).

Sohler, C., &; Czumaj, A. (2007). Sublinear-time approximation algorithms for clustering via random sampling. Random Structures &; Algorithms, 30(1–2), 226-- 256.

Sohler, C., Monemizahdeh, M., &; Feldman, D. (2007). A PTAS for k-means clustering based on weak coresets. In Proceedings of the 23rd annual symposium on computational geometry (SoCG’07) (pp. 11–18).

Sohler, C., Czumaj, A., &; Frahling, G. (2007). Efficient kinetic data structures for MaxCut. In Proceedings of the 19th Canadian Conference on Computational Geometry (CCCG) (pp. 157–160).

Brinkmann, A., Effert, S., Meyer auf der Heide, F., &; Scheideler, C. (2007). Dynamic and redundant data placement. IEEE International Conference on Distributed Computing Systems (ICDCS).

Frank, U., Gausemeier, J., Schmidt, A., &; Zimmer, D. (2007). Von der Mechatronik zur Selbstoptimierung. In Internationales Forum Mechatronik. Intelligente Systeme und Module. Züricher Hochschule für Angewandte Wissenschaften Institut für Mechatronische Systeme.

Gausemeier, J., Dangelmaier, W., Zimmer, D., Schmidt, A., Frank, U., &; Klöpper, B. (2007). Using Active Patterns for the Conceptual Design of Self-Optimizing Systems Exemplified by an Air Gap Adjustment System. In Computers and Information in Engineering Conference, Parts A and B (Vol. 27, pp. 935–944). American Society of Mechanical Engineers.https://doi.org/10.1115/DETC2007-34642 

Gausemeier, J., Zimmer, D., Frank, U., Pook, S., &; Schmidt, A. (2007). Conceptual Design of Self-Optimizing Systems Exemplified by a Magnetic Linear Drive. In International Conference of Engineering Design (Vol. 16, pp. 311–323).

Zimmer, D., &; Möller, J. (2007). Messung von radialen Lagerkräften an einem CVT-Variator mit Schubgliederband. In VDI-Gesellschaft Entwicklung Konstruktion Vertrieb (VDI-EKV) (pp. 305–322). : VDI Verlag GmbH .

Zimmer, D., Felgenhauer, B., &; Möller, J. (2007). Messung der radialen Lagerkräfte eines CVT-Variators. Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe , 59(6), 78–82.

Gausemeier, J., Frank, U., Pook, S., Zimmer, D., &; Schmidt, A. (2007). Konzipierung selbstoptimierender Systeme am Beispiel eines magnetischen Linearantriebs (pp. 175–196). W. V. Westfalia Druck GmbH.

Denzer, V. (2007). Dimensioning and tolerancing in international comparison. Confrontation of standardisation works of GPS and GD&;T. In CIRP Conference on Computer Aided Tolerancing. Specification and Verification for Assemblies (Vol. 10, p. 39). Shaker Verlag .

Felgenhauer, B. (2007). Untersuchungen zur Verformung, zum Lauf des Umschlingungsmittels und zur Reibung in einem stufenlosen Umschlingungsgetriebe. Der Andere Verlag.

Bruns, T., &; Schäfer, E. (2007). Modelling and Identification of an All-Terrain Vehicle. International Journal of Vehicle Systems Modelling and Testing 2007, 276–295.

Henke, C., Rustemeier, C., Schneider, T., Böcker, J., &; Trächtler, A. (2007). RailCab - Ein Schienenverkehrssystem mit autonomen, Linearmotor getriebenen Einzelfahrzeugen. In Internationaler ETG - Kongress 2007.

Cinkaya, H., Noelle, R., Münch, E., &; Trächtler, A. (2007). Self-Calibration of the 6-dof Parallel Robot TriPlanar by Identification of the Geometry Parameters. AIM 2007.

Nachtigal, V., Trächtler, A., &; Jäker, K.-P. (2007). X-by-Wire Test Vehicle for the Test of New Design Methods and Tools to Interconnect Vehicle-Dynamics Control Systems. In 5th IFAC Symposium on Advances in Automotive Control (AAC). CA, USA.

Salfeld, M., Stabrey, S., &; Trächtler, A. (2007). Optimal Control Inputs to Affect Vehicle Dynamics in Various Driving States. In 5th IFAC Symposium on Advances in Automotive Control (AAC). CA, USA.

Just, V., Trächtler, A., &; Jäker, K.-P. (2007). Modellierung des Papiertransports in Geldautomaten. In Mechatronik 2007. Wiesloch bei Heidelberg.

Cinkaya, H., Münch, E., Noelle, R., Trächtler, A., &; Toepper, S. (2007). Selbstkalibrierung des 6 DOF Parallelroboters TRIPLANAR durch Identifikation der Geometrieparameter mit einem einfachen Messverfahren. Mechatronik 2007: Innovative Produktentwicklung.

Burmester, S., Giese, H., Henkler, S., Hirsch, M., Tichy, M., Gambuzza, A.,  Voecking, H. (2007). Tool Support for Developing Advanced Mechatronic Systems: Integrating the Fujaba Real-Time Tool Suite with CAMeL-View. 29th International Conference on Software Engineering (ICSE), 801–804.

Trächtler, A. (2007). Modellbasierter Entwurf mechatronischer Fahrwerksysteme. Paderborner Workshop Entwurf Mechatronischer Systeme (EMS).

Frank, U., Giese, H., Müller, T., Oberthür, S., Romaus, C., Tichy, M., &; Voecking, H. (2007). Potenziale und Risiken der Selbstoptimierung für die Verlässlichkeit mechatronischer Systeme . Paderborner Workshop Entwurf Mechatronischer Systeme (EMS), 5.

Münch, E., Cinkaya, H., &; Trächtler, A. (2007). Realisierung eines Werkzeuges zur algorithmischen Differenzierung von Modellen mechatronischer Systeme. Paderborner Workshop Entwurf Mechatronischer Systeme (EMS), (5).

Salfeld, M., Stabrey, S., &; Trächtler, A. (2007). Analysis of the Vehicle Dynamics and Yaw Moment Maximization in Skid Maneuvers. Chassis.Tech 2007.

Krevert, B., Dang, T. B., Weise, R., Fricke, H., Domik, G., &; Buchert, W. (2007). Ein plattformunabhängiges Softwaretool für die schnelle Qualitätskontrolle von Transmissions- und dynamischen Emissionsdaten in der PET. In 45. Jahrestagung der DGN.

Aggarwal, V., Feldmann, A., &; Scheideler, C. (2007). Can ISPs and P users cooperate for improved performance? ACM Computer Commucation Review.https://doi.org/10.1145/1273445.1273449 

Tonchev, A., Hirschberg, W., Sextro, W., Major, Z., &; Neges, J. (2007). Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe. In 27. Internationales Mju-Symposium/Bremsen-Fachtagung (pp. 29–49). Bad Neuenahr: VDI Verlag GmbH.

Tonchev, A., Hirschberg, W., Sextro, W., Major, Z., &; Neges, J. (2007). Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc. In 27. Internationales Mju-Symposium/Bremsen-Fachtagung (pp. 144–163). Bad Neuenahr: VDI Verlag GmbH.

Camarena Gandia, F., Hemsel, T., Espinosa, V., Twiefel, J., Ardid, M., Martinez-Mora, J., &; Gandia, J. B. (2007). Non-destructive ultrasonic test of orange dehydration. In Proceedings of 19th international congress on Acoustics, Madrid.

Genzo, A., Sextro, W., &; Panning, L. (2007). Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten. In VDI-Berichte (Vol. 2022, pp. 147–161). Düsseldorf: VDI Verlag GmbH.

Hemsel, T., Stroop, R., Oliva Uribe, D., &; Wallaschek, J. (2007). Resonant vibrating sensors for tactile tissue differentiation. Journal of Sound and Vibration, 308, 441–446.https://doi.org/10.1016/j.jsv.2007.03.063 

Lierke, E.-G., &; Hemsel, T. (2007). Perspectives of Tumour Therapy by Local Ultrasonic Hyperthermia and Thermal Ablation. In Proceedings of 19th international congress on Acoustics, Madrid.

Shigematsu , T., Morita, T., &; Hemsel, T. (2007). Fundamental Study on A Thickness-Shear Transformer using X-Cut Lithium Niobate. Proceedings of Symposium on Ultrasonic Electronics, 28, 439–440.

Szwedowicz, J., Visser, R., Sextro, W., &; Masserey, P. A. (2007). On Nonlinear Forced Vibration of Shrouded Turbine Blades. Journal of Turbomachinery, 130(1), 011002–011002.

Engels, G., Opdyke, B., C. Schmidt, D., &; Weil, F. (Eds.). (2007). Proceedings of the 10th International Conference on Model Driven Engineering Languages and Systems (MoDELS 2007), Nashville, TN (USA) (Vol. 4735). Berlin/Heidelberg: Springer.http://dx.doi.org/10.1007/978-3-540-75209-7 

Pleuß, A., Van den Bergh, J., Hußmann, H., Sauer, S., &; Görlich, D. (Eds.). (2007). Proceedings of the MoDELS 2007 Workshop on Model Driven Development of Advanced User Interfaces (MDDAUI ’07), Nashville, Tennessee (USA) (Vol. 297). University of Aachen.

Schattkowsky, T., Engels, G., &; Förster, A. (2007). A Model-Based Approach for Platform-Independent Binary Components with Precise Timing and Fine-Grained Concurrency. In Proceedings of the 40th Annual Hawaii International Conference on System Sciences (HICSS 2007) (p. 286ff.). Washington, DC, USA: IEEE Computer Society.http://doi.ieeecomputersociety.org/10.1109/HICSS.2007.22 

Küster, J., Ryndina, K., &; Gall, H. (2007). Generation of Business Process Models for Object Life Cycle Compliance. In Proceedings of the conference on Business Process Management (BPM 2007), Brisbane (Australia) (Vol. 4714, pp. 165–181). Berlin/Heidelberg: Springer.https://groups.uni-paderborn.de/fg-engels/Publications/dx.doi.org/10.1007/978-3-540-75183-0_13 

Pleuß, A., Van den Bergh, J., Sauer, S., Hußmann, H., &; Bödcher, A. (2007). Model Driven Development of Advanced User Interfaces (MDDAUI) - MDDAUI’06 Workshop Report. In MoDELS 2006 Workshops (Vol. 4364, pp. 101–105). Berlin/Heidelberg: Springer.http://dx.doi.org/10.1007/978-3-540-69489-2_13 

Sauer, S., &; Engels, G. (2007). Easy Model-Driven Development of Multimedia User Interfaces with GuiBuilder. In Proceeding of the 4th International Conference on Universal Access in Human-Computer Interaction (UAHCI, as Part of HCI International, 2007), Beijing (China) (Vol. 4554, pp. 537–546). Berlin/Heidelberg: Springer.http://dx.doi.org/10.1007/978-3-540-73279-2_60 

Bals, J.-C., Christ, F., Engels, G., &; Erwig, M. (2007). ClassSheets - model-based, object-oriented design of spreadsheet applications. In Proceedings of the TOOLS Europe Conference (TOOLS 2007), Zürich (Swiss) (Vol. 6, pp. 383–398). Journal of Object Technology.http://www.jot.fm/issues/issue_2007_10/paper19/index.html 

Mlynarski, M., Hinkelmann, K., Magenheim, J., Nelkner, T., Reinhardt, W., &; Holzweissig, K. (2007). KnowledgeBus - An Architecture to Support Intelligent and Flexible Knowledge Management. In Creating New Learning Experiences on a Global Scale, Second European Conference on Technology Enhanced Learning, EC-TEL 2007, Crete, Greece, September 17-20, 2007 (pp. 487–492). Berlin/Heidelberg: Springer.

Förster, A., Engels, G., Schattkowsky, T., &; Van Der Straeten, R. (2007). Verification of Business Process Quality Constraints Based on Visual Process Patterns. In Proceedings of the First Joint IEEE/IFIP Symposium on Theoretical Aspects of Software Engineering (TASE 2007), Shanghai (China) (pp. 197–208). Washington, DC, USA: IEEE Computer Society.http://dx.doi.org/10.1109/TASE.2007.56 

Hess, A., Humm, B., Voß, M., &; Engels, G. (2007). Structuring Software Cities - A Multidimensional Approach. In Proceedings of the 11th IEEE International Enterprise Distributed Object Computing Conference (EDOC 2007) (pp. 122–129). Washington, DC, USA: IEEE Computer Society.

Mlynarski, M., Nelkner, T., &; Reinhardt, W. (2007). Vom Informations- zum Wissensmanagement: Der Knowledge Bus als flexibler Lösungsansatz. In Informatiktage 2007: Fachwissenschaftlicher Informatik-Kongress, 30. und 31. März 2007, B-IT Bonn-Aachen International Center for Information Technology Bonn (pp. 99–102).