D. Battré, G. Birkenheuer, V. Deora, M. Hovestadt, O. Rana, and O. Wäldrich, “Guarantee and Penalty Clauses for Service Level Agreements,” in Proc. Cracow Grid Workshop (CGW), 2008, pp. 213–220.
LibreCat: /record/2359

W. Richert, O. Niehörster, and M. Koch, “Layered understanding for sporadic imitation in a multi-robot scenario,” in Proc. IEEE/RSJ Int.Conf. on Intelligent Robots and Systems (IROS), 2008.
LibreCat: /record/2360
DOI: 10.1109/IROS.2008.4650817

A. Brinkmann and R. Chamberlain, Eds., Proc. Int. Workshop on Storage Network Architecture and Parallel I/Os (SNAPI). Los Alamitos, CA, USA: IEEE Computer Society, 2008.
LibreCat: /record/2362

S. Lietsch, H. Zabel, and C. Laroque, “Computational Steering Of Interactive Material Flow Simulations,” in Proc. ASME Computers and Information in Engineering Conference (CIE), 2008, pp. 1493–1502.
LibreCat: /record/2363
DOI: 10.1115/DETC2008-49405

M. Platzner et al., “The GOmputer: Accelerating GO with FPGAs,” in Proc. Int. Conf. on Engineering of Reconfigurable Systems and Algorithms (ERSA), 2008, pp. 245–251.
LibreCat: /record/2365

S. Lietsch and P. Hermann Lensing, “CUDA-based, parallel JPEG Compression for Remote Rendering,” in Proc. Int. Symp. on Image/Video Communications over fixed and mobile networks (ISVC), 2008.
LibreCat: /record/2368

G. Birkenheuer, M. Hovestadt, O. Kao, and K. Voß, “Overbooking in Planning Based Scheduling Systems,” in Proc. Int. Conf. on Grid Computing &; Applications (GCA), 2008, pp. 242–248.
LibreCat: /record/2369

A. Brinkmann and S. Effert, “Data Replication in P Environments,” in Proc. Int. Symp. on Parallelism in Algorithms and Architectures (SPAA), 2008, pp. 191–193.
LibreCat: /record/2371
DOI: 10.1145/1378533.1378570

B. Griese, A. Brinkmann, and M. Porrmann, “SelfS – A Real-Time Protocol for Virtual Ring Topologies,” in Proc. Int. Symp. on Parallel and Distributed Processing (IPDPS), 2008, pp. 1–8.
LibreCat: /record/2374
DOI: 10.1109/IPDPS.2008.4536571

K. Voss, “Recursive Evaluation of Fault Tolerance Mechanisms for SLA Management,” in Proc. Int. Conf. on Networking and Services (ICNS), 2008, pp. 223–229.
LibreCat: /record/2375
DOI: 10.1109/ICNS.2008.22

A. Brinkmann and H. Karl, Eds., Proceedings of the 1. GI/ITG KuVS Fachgespräch Virtualisierung. Paderborn Center for Parallel Computing, Paderborn University, 2008.
LibreCat: /record/2376

A. Brinkmann and S. Effert, “Storage Cluster Architectures,” in Proc. of the GI/ITG KuVS Fachgespr ach Virtualisierung, 2008, pp. 107–115.
LibreCat: /record/2380

W. Richert, F. Klompmaker, and O. Niehörster, “Guiding exploration by combining individual learning and imitation in societies of autonomous robots,” in Proc. IFIP Conf. on Biologically Inspired Cooperative Computing (BICC), 2008, pp. 233–244.
LibreCat: /record/2382
DOI: 10.1007/978-0-387-09655-1_21

S. Lietsch and P. Hermann Lensing, “GPU-Supported Image Compression for Remote Visualization - Realization and Benchmarking,” in Proc. Int. Symp. on Visual Computing (ISVC), 2008, vol. 5358, pp. 658–668.
LibreCat: /record/2383
DOI: 10.1007/978-3-540-89639-5_63

C. Laroque, S. Lietsch, and H. Zabel, “Computational Steering verteilter, interaktiver Materialflusssimulationen,” in Augmented &; Virtual Reality in der Produktentstehung, vol. 232, Paderborn, Germany: Heinz Nixdorf Institut, 2008, pp. 221–239.
LibreCat: /record/2384

M. Bienkowski, A. Brinkmann, and M. Korzeniowski, “Degree 3 Suffices: A Large-Scale Overlay for P Networks,” in Proc. Int. Conf. on Principles Of DIstributed Systems (OPODIS), 2008, pp. 184–196.
LibreCat: /record/2386
DOI: 10.1007/978-3-540-92221-6_13

D. Battre, G. Birkenheuer, M. Hovestadt, O. Kao, and K. Voss, “Applying Risk Management to Support SLA Provisioning,” in Proc. Cracow Grid Workshop (CGW), 2008.
LibreCat: /record/2387

D. Battré, O. Kao, and K. Voss, “Implementing WS-Agreement in a Globus Toolkit 4.0 Environment,” in Proc. Usage of Service Level Agreements in Grids Workshop held in conjunction with International Conference on Grid Computing, 2008, pp. 409–418.
LibreCat: /record/2388
DOI: 10.1007/978-0-387-78446-5_28

H. Hamann and H. Wörn, “Aggregating Robots Compute: An Adaptive Heuristic for the Euclidean Steiner Tree Problem,” in The tenth International Conference on Simulation of Adaptive Behavior (SAB’08), 2008, vol. 5040, pp. 447--456.
LibreCat: /record/20367
DOI: 10.1007/978-3-540-69134-1_44

H. Hamann, T. Schmickl, H. Wörn, and K. Crailsheim, “Spatial Macroscopic Models of a Bio-Inspired Robotic Swarm Algorithm,” in IEEE/RSJ 2008 International Conference on Intelligent Robots and Systems (IROS’08), 2008, pp. 1415--1420.
LibreCat: /record/20368
DOI: 10.1109/IROS.2008.4651038

H. Hamann and H. Wörn, “A framework of space–time continuous models for algorithm design in swarm robotics,” Swarm Intelligence, vol. 2, no. 2–4, pp. 209–239, 2008.
LibreCat: /record/20369
DOI: 10.1007/s11721-008-0015-3

J. Baumeister, “Sensomotorik: Kreuzbandverletzung hinterläßt Spuren im Gehirn,” Sportverl Sportschad, vol. 22, no. 3, pp. 135–138, 2008.
LibreCat: /record/20478

J. Baumeister, T. Barthel, K. R. Geiss, and M. Weiss, “Influence of phasphatidylserine on cognitive performance and cortical activity after induced stress,” Nutr Neurosci, vol. 11, no. 3, pp. 103–110, 2008.
LibreCat: /record/20479

J. Baumeister, K. Reinecke, H. Liesen, and M. Weiss, “Cortical activity of skilled performance in a complex sports related motor task,” Eur J Appl Physiol, vol. 104, no. 625, pp. 625–631, 2008.
LibreCat: /record/20480

J. Baumeister, K. Reinecke, and M. Weiss, “Changed cortical activity after anterior cruciate ligament reconstruction in a joint position paradigm: an EEG study,” Scand J Med Sci Sports, vol. 18, no. 4, pp. 473–484, 2008.
LibreCat: /record/20481

B. Monien, U. Lorenz, and D. Warner, “Der Alphabeta-Algorithmus für Spielbäume: Wie bringe ich meinen Computer zum Schachspielen?,” in Taschenbuch der Algorithmen, Berlin, Heidelberg, 2008.
LibreCat: /record/20711
DOI: 10.1007/978-3-540-76394-9_28

D. Krimphove, “Bürgschaft,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2076

D. Krimphove, “Eigentumsvorbehalt,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2077

D. Krimphove, “Garantievertrag,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2078

D. Krimphove, “Grundschuld,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2079

D. Krimphove, “Hypothek,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2080

D. Krimphove, “Kreditsicherheiten,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2081

D. Krimphove, “Nutzungspfand,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2082

D. Krimphove, “Pfand-/Faustpfand,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2083

D. Krimphove, “Pfandrech,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2084

D. Krimphove, “Schuldbeitritt auch Schuld(mit)übernahme,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2085

D. Krimphove, “Sicherungsübereignung,” in Das neue Lexikon der Betriebswirtschaftslehre, München: Oldenbourg Verlag, 2008.
LibreCat: /record/2086

K. Lürwer-Brüggemeier and M. Ziegler, “On Faster Integer Calculations Using Non-arithmetic Primitives,” in Unconventional Computing, Berlin, Heidelberg, 2008.
LibreCat: /record/17978
DOI: 10.1007/978-3-540-85194-3_11

C. Laroque, M. Fischer, W. Dangelmaier, and B. Eikel, “Dynamic Control of Animation Schemes for the Efficient 3D-Visualization of Material Flow Simulations,” in Industrial Simulation Conference (ISC 2008), 2008, pp. 306–310.
LibreCat: /record/18139

C. Laroque, M. Fischer, and B. Eikel, “Regelung von Animationen in Simulationen von  hochdynamischen Fabrikszenen ,” in Augmented &; Virtual Reality in der Produktentstehung, 2008, vol. 232, pp. 193--206.
LibreCat: /record/18141

S. Le Roux and M. Ziegler, “Singular Coverings and Non-Uniform Notions of Closed Set Computability,”10.1016/j.entcs.2008.03.009__Electronic Notes in Theoretical Computer Science, pp. 73–88, 2008, doi:10.1016/j.entcs.2008.03.009 .
LibreCat: /record/18143
DOI: 10.1016/j.entcs.2008.03.009

S. Valentin, H. S. Lichte, D. Warneke, T. Biermann, R. Funke, and H. Karl, “Mobile Cooperative WLANs - MAC and Transceiver Design, Prototyping, and Field Measurements,” in 2008 IEEE 68th Vehicular Technology Conference, 2008.
LibreCat: /record/1834
DOI: 10.1109/vetecf.2008.350

S. Valentin, T. Freitag, and H. Karl, “Integrating Multiuser Dynamic OFDMA into IEEE 802.11 WLANs - LLC/MAC Extensions and System Performance,” in 2008 IEEE International Conference on Communications, 2008.
LibreCat: /record/1839
DOI: 10.1109/icc.2008.626

D. H. Woldegebreal and H. Karl, “Network-Coding-Based Cooperative Transmission in Wireless Sensor Networks: Diversity-Multiplexing Tradeoff and Coverage Area Extension,” in Lecture Notes in Computer Science, Berlin, Heidelberg: Springer Berlin Heidelberg, 2008, pp. 141–155.
LibreCat: /record/1841
DOI: 10.1007/978-3-540-77690-1_9

H. Ackermann, P. Briest, A. Fanghänel, and B. Vöcking, “Who Should Pay for Forwarding Packets?,” Internet Mathematics, vol. 5, no. 4, pp. 459–475, 2008.
LibreCat: /record/18570
DOI: 10.1007/978-3-540-77105-0_21

N.-P. Kriegel, “Systematic analysis of the synchronization of twin screw extruders,” in International Rubber Mixing Symposium, 2008, vol. 1.
LibreCat: /record/22338

P. Adelt, A. Schmidt, N. Esau, L. Kleinjohann, B. Kleinjohann, and M. Rose, “Approximation of Environment Models for an Air Gap Adjustment System in a Hybrid Planning Context,” in M, 2008, pp. 619–624.
LibreCat: /record/22339
DOI: 10.1109/ISIC.2008.4635937

N. Esau, P. Adelt, A. Schmidt, and M. Rose, “Interval Optimization in a Hybrid Planner Context for an Air Gap Adaptation System,” in AISM 2008. 3rd Asia International Symposium on Mechatronics, 2008, vol. 3, pp. 39–44.
LibreCat: /record/22340

J. Gausemeier, S. Kahl, D. Zimmer, and A. Schmidt, “Holistic Conceptual Design of Self-Optimizing Systems,” in AISM 2008. 3rd Asia International Symposium on Mechatronics, 2008, vol. 3, pp. 544–549.
LibreCat: /record/22341

A. Schmidt, P. Adelt, and N. Esau, “Integrating dynamic track sectioning into a hybrid planning infrastructure,” in International Conference on Instrumentation, Control and Information Technology, 2008, vol. 47, pp. 653–658.
LibreCat: /record/22342
DOI: 10.1109/SICE.2008.4654737

J. Gausemeier, H. Podlogar, J. Donoth, D. Zimmer, and A. Schmidt, “Determination of Active Pattern during the Conceptual Design of Self-Optimizing Systems Demonstrated by an Air Gap Adjustment System,” in International Conference on Systems Engineering, 2008, vol. 19, pp. 474–479.
LibreCat: /record/22343
DOI: 10.1109/ICSEng.2008.60

A. Schmidt, N. Esau, P. Adelt, and C. Stern, “Dynamic optimization of track sectioning in mechatronic systems for a hybrid planner,” in IEEE International Conference on Mechatronics and Automation, 2008, vol. 5, pp. 797–802.
LibreCat: /record/22344
DOI: 10.1109/ICMA.2008.4798859

S. Henkler, M. Hirsch, S. Kahl, and A. Schmidt, “Development of Self-Optimizing Systems. Domain-Spanning and Domain-Specific Models Exemplified by an Air Gap Adjustment System for Autonomous Vehicles,” in Computers and Information in Engineering Conference, Parts A and B, 2008, vol. 28, pp. 1411–1421.
LibreCat: /record/22345
DOI: 10.1115/DETC2008-49475

B. Klöpper, C. Romaus, A. Schmidt, H. Vöcking, and J. Donoth, “Defining Plan Metrics for Multi-Agent Planning Within Mechatronic Systems,” in Computers and Information in Engineering Conference, Parts A and B, 2008, vol. 28, pp. 47–56.
LibreCat: /record/22346
DOI: 10.1115/DETC2008-49642

A. Schmidt, P. Adelt, N. Esau, L. Kleinjohann, and B. Kleinjohann, “Using Enviromental Models Approximated by Fuzzy Identification for Hybrid Planning of Mechatronic Systems,” in Computers and Information in Engineering Conference, Parts A and B, 2008, vol. 28, pp. 1125–1133.
LibreCat: /record/22347
DOI: 10.1115/DETC2008-49153

J. Gausemeier, D. Zimmer, J. Donoth, S. Pook, and A. Schmidt, “Proceedings for the conceptual design of self-optimizing mechatronic systems,” in DESIGN 2008, International Design Conference, 2008, vol. 20.
LibreCat: /record/22348

B. Klöpper, C. Romaus, A. Schmidt, and H. Vöcking, A Multi-Agent Planning Problem for the Coordination of Function Modules. W. V. Westfalia Druck GmbH , 2008, pp. 377–393.
LibreCat: /record/22349

J. Gausemeier, J. Donoth, S. Pook, D. Zimmer, and A. Schmidt, Conceptual Design of Self-Optimizing Mechatronic Systems. W. V. Westfalia Druck GmbH , 2008, pp. 35–51.
LibreCat: /record/22350

S. Osmic and A. Trächtler, “Flatness-based Online Controller Reconfiguration,” 34th Annual Conference of the IEEE Industrial Electronics Society (IECON 2008), IEEE IES, 2008.
LibreCat: /record/23254

T. Zeineldin, “Modeling the Process of Drying Stationary Objects inside a Tumble Dryer Using COMSOL Multiphysics,” COMSOL Conference 2008, 2008.
LibreCat: /record/23255

E. Münch, P. Adelt, M. Krüger, B. Kleinjohann, and A. Trächtler, “Hybrid Planning and Hierarchical Optimization of Mechatronic Systems,” in Proceedings of the International Conference on Control, Automation and Systems (ICCAS), 2008.
LibreCat: /record/23256

V. Nachtigal, K.-P. Jäker, and A. Trächtler, “Development and Control of a Quarter-Vehicle Testbed for a Fully Active X-by-Wire Demonstrator,” 9th International Symposium on Advanced Vehicle Control (AVEC 2008), 2008.
LibreCat: /record/23257

C. Henke, M. Tichy, T. Schneider, J. Böcker, and W. Schäfer, “Organization and Control of Autonomous Railway Convoys,” in Proceedings of the 9th International Symposium on Advanced Vehicle Control, Kobe, Japan, 2008.
LibreCat: /record/23258

H. Voecking and A. Trächtler, “Self-optimization of an Active Suspension System Regarding Energy Requirements,” International Conference on Control, Automation and Systems 2008 (ICCAS), pp. 14–17, 2008.
LibreCat: /record/23259

I. Illg, M. Tewes, K.-P. Jäker, and A. Trächtler, “Mechatronic Design and Implementation of an Active Suspension for an All-Terrain Tracked Vehicle,” 9th International Symposium on Advanced Vehicle Control (AVEC 2008), 2008.
LibreCat: /record/23260

V. Just, H. Cinkaya, A. Trächtler, and K.-P. Jäker, “Model-based Controller Design for the Paper Separation-Process in Automatic Teller Machines,” in The 9th International Conference on Motion and Vibration Control (Movic 2008), 2008.
LibreCat: /record/23261

B. Klöpper, C. Romaus, A. Schmidt, H. Voecking, and J. Donoth, “Defining Plan Metrics for Multi-Agent Planning within Mechatronic Systems,” ASME 2008 - International Design Engineering Technical Conferences &; Computers and Information in Engineering Conference (IDETC/CIE), 2008.
LibreCat: /record/23262

C. Sondermann-Wölke, T. Müller, J. Geisler, A. Trächtler, and J. Böcker, “The Active Guidance Module of a Rail-Bound Vehicle as an Application of Dependability Oriented Design in Self-Optimizing Systems,” ASME 2008 - International Design Engineering Technical Conferences &; Computers and Information in Engineering Conference (IDETC/CIE), 2008.
LibreCat: /record/23263

J. Geisler, K. Witting, A. Trächtler, and M. Dellnitz, “Multiobjective Optimization of Control Trajectories for the Guidance of a Rail-bound Vehicle,” in Proc. 17th IFAC World Congress, 2008.
LibreCat: /record/23264

S. Burmester, H. Giese, E. Münch, O. Oberschelp, F. Klein, and P. Scheideler, “Tool Support for the Design of Self-Optimizing Mechatronic Multi-Agent Systems,” International Journal on Software Tools for Technology Transfer (STTT), pp. 207–222, 2008.
LibreCat: /record/23265

C. Henke, M. Tichy, T. Schneider, J. Böcker, and W. Schäfer, “System Architecture and Risk Management for Autonomous Railway Convoys,” in Proceedings of the 2nd Annual IEEE International Systems Conference, Montreal, Canada, 2008.
LibreCat: /record/23266

S. Oberthür, A. Znamenshchykov, B. Klöpper, and H. Voecking, “Improved Flexible Resource Management by Means of Look-Ahead Scheduling and Bayesian Forecasting ,” 7th International Heinz Nixdorf Symposium: Self-optimizing Mechatronic Systems: Designing the Future, pp. 361–376, 2008.
LibreCat: /record/23268

T. Bruns and A. Trächtler, “Autonomes Kreuzungsmanagement für Kraftfahrzeuge - Trajektorienplanung mittels Dynamischer Programmierung,” 4. VDI/VDE-Fachtagung zur Steuerung und Regelung von Fahrzeugen und Motoren (AUTOREG 2008), 2008.
LibreCat: /record/23269

J. Geisler, K. Witting, A. Trächtler, and M. Dellnitz, “Self-Optimization of the Guidance Module of a Rail-bound Vehicle,” 7th International Heinz Nixdorf Symposium: Self-optimizing Mechatronic Systems: Designing the Future, 2008.
LibreCat: /record/23270

S. Osmic et al., “Safe Online-Reconfiguration of Self-Optimizing Mechatronic Systems ,” 7th International Heinz Nixdorf Symposium: Self-optimizing Mechatronic Systems: Designing the Future, 2008.
LibreCat: /record/23271

A. Wielenberg, J. Harchenko, K.-P. Jäker, and A. Trächtler, “Modellbasierte Entwicklung eines volltragenden, vollaktiven Federungssystems für ein geländegängiges Nutzfahrzeug,” 4. VDI/VDE-Fachtagung zur Steuerung und Regelung von Fahrzeugen und Motoren (AUTOREG 2008), 2008.
LibreCat: /record/23272

B. Klöpper, C. Romaus, A. Schmidt, and H. Voecking, “A Multi-Agent Planning Problem for the Coordination of Function Modules ,” 7th International Heinz Nixdorf Symposium: Self-optimizing Mechatronic Systems: Designing the Future, pp. 377–393, 2008.
LibreCat: /record/23273

E. Münch, A. Gambuzza, C. Paiz, C. Pohl, and M. Porrmann, “FPGA-in-the-Loop Simulations with CAMEL-View,” in In Proceedings of the 7th International Heinz Nixdorf Symposium, 2008.
LibreCat: /record/23274

E. Schäfer, K.-P. Jäker, and A. Trächtler, “Modellbildung, Analyse und Regelung eines aktiv gefederten Fahrzeugs,” 4. VDI/VDE-Fachtagung zur Steuerung und Regelung von Fahrzeugen und Motoren (AUTOREG 2008), p. 409, 2008.
LibreCat: /record/23275

W. Poddubny, A. Trächtler, K.-P. Jäker, and V. Nachtigal, “Definition of Optimum Parameters of Elastic Support of the Electric Motor of a Drive of a Wheel for Improvement of Dynamics of the Wheel Machine,” AcCeCdCa, CeCcDf, CfCbCd (Mechatronik, Automatisierung, Regelung), vol. 5, pp. 42–44, 2008.
LibreCat: /record/23276

G. Domik, A. Chalmers, D. W. Fellner, and H. E. Rushmeier, “What Can We Gain from Transdisciplinary Visualization Courses?,” in Eurographics 2008 - Education Papers, Crete, Greece, April 14-18, 2008, 2008, pp. 21–24.
LibreCat: /record/21775
DOI: 10.2312/eged.20081003

D. Rumlich, “Learning English - the reading performance of a Japanese ‘SUE’ (successful user of English),” in Working papers in Applied Linguistics, L. Campbell, Ed. Hamilton, New Zealand, 2008, pp. 25–34.
LibreCat: /record/21913

F. Bo, L. Ting, and T. Hemsel, “A simple pre-stress estimating method of langevin transducers,” in Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium on, 2008, pp. 324–327.
LibreCat: /record/9568
DOI: 10.1109/SPAWDA.2008.4775801

E.-G. Lierke and T. Hemsel, “Local Ultrasonic Hyperthermia and Thermo-ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours,” Acta Acustica united with Acustica, vol. 94, no. 3, pp. 369–381, 2008.
LibreCat: /record/9569
DOI: 10.3813/AAA.918044

T. Müller, F. Schiedeck, and T. Hemsel, “Verlässlichkeitorientierte Technologiebewertung innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen,” in 2. Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und adaptronischer Systeme: Absicherung der Systemzuverlässigkeit, Koblenz, 2008.
LibreCat: /record/9570

M. Mracek, T. Hemsel, T. Sattel, P. Vasiljev, and J. Wallaschek, “Driving concepts for bundled ultrasonic linear motors,” Journal of Electroceramics, vol. 20, no. 3–4, pp. 153–158, 2008.
LibreCat: /record/9571
DOI: 10.1007/s10832-007-9123-5

M. Assmann and G. Engels, “Service-Oriented Enterprise Architectures: Evolution of Concepts and Methods,” in Proc. of the 12th IEEE International Enterprise Distributed Object Computing Conference 2008 (EDOC 08), Munich (Germany), 2008, pp. xxxiv–xliii.
LibreCat: /record/7994
DOI: https://groups.uni-paderborn.de/fg-engels/Publications/10.1109/EDOC.2008.48

M. Assmann and G. Engels, “Transition to Service-Oriented Enterprise Architecture,” in Proceedings of the Second European Conference on Software Architecture (ECSA 2008), Paphos (Cyprus), 2008, vol. 5292, pp. 346–349.
LibreCat: /record/7995
DOI: http://dx.doi.org/10.1007/978-3-540-88030-1_34

F. Salger, M. Bennicke, G. Engels, and C. Lewerentz, “Comprehensive Architecture Evaluation and Management in Large Software-Systems,” in Quality of Software Architectures. Models and Architectures, 2008, vol. 5281, pp. 205–219.
LibreCat: /record/7996
DOI: http://dx.doi.org/10.1007/978-3-540-87879-7_13

G. Engels and M. Voß, “Quasar Enterprise - Anwendungslandschaften serviceorientiert gestalten,” in Software Engineering 2008. Fachtagung des GI-Fachbereichs Softwaretechnik, 2008, vol. 121, pp. 24–27.
LibreCat: /record/7997

J. Küster, C. Gerth, A. Förster, and G. Engels, “Detecting and Resolving Process Model Differences in the Absence of a Change Log,” in Proceedings of the 6th International Conference on Business Process Management (BPM’08), 2008, vol. 5240, pp. 244–260.
LibreCat: /record/7998
DOI: http://dx.doi.org/10.1007/978-3-540-85758-7_19

G. Engels et al., “A Method for Engineering a true Service-Oriented Architecture,” in Proceedings of the Tenth International Conference on Enterprise Information Systems (ICEIS 2008), Barcelona (Spain), 2008, vol. ISAS-2, pp. 272–281.
LibreCat: /record/7999

S. Frohnhoff and G. Engels, “Revised Use Case Point Method - Effort Estimation in Development Projects for Business Applications,” in Setting Quality Standards, Proceedings of the 11th International Conference on Quality Engineering in Software Technology (CONQUEST 2008), Potsdam (Germany), 2008, pp. 15–32.
LibreCat: /record/8000

M. Mlynarski, “Qualitätssicherung im Business Process Modeling durch automatische Ableitung visueller Kontrakte aus heterogenen UML-Modellen,” in Informatiktage 2008. Fachwissenschaftlicher Informatik-Kongress, 14. und 15. März 2008, B-IT Bonn-Aachen International Center for Information Technology in Bonn, 2008, pp. 87–90.
LibreCat: /record/8001

J. Koehler et al., “Combining Quality Assurance and Model Transformations in Business-Driven Development,” in Proceedings of the 3rd International Symposium on Applications of Graph Transformations with Industrial Relevance 2007 (AGTIVE ’07), Kassel (Germany), 2008, vol. 5088, pp. 1–16.
LibreCat: /record/8002
DOI: http://dx.doi.org/10.1007/978-3-540-89020-1_1

H. Voigt and G. Engels, “Kontextsensitive Qualitätsplanung für Software-Modelle,” in Proceedings of Modellierung (2008), Berlin (Germany), 2008, vol. 127, pp. 165–180.
LibreCat: /record/8003

H. Voigt and G. Engels, “Ein verfeinerter GQM-Ansatz zur Qualitätsbewertung von Software-Modellen,” in Proceedings of Software-Qualitätsmodellierung und -bewertung (SQMB ’08), München, Germany, 2008, pp. 39–46.
LibreCat: /record/8004

H. Voigt, B. Güldali, and G. Engels, “Quality Plans for Measuring the Testability of Models,” in Proceedings of the 11th International Conference on Quality Engineering in Software Technology (CONQUEST 2008), Potsdam (Germany), 2008, pp. 353–370.
LibreCat: /record/8005

H. Voigt and T. Ruhroth, “A Quality Circle Tool for Software Models,” in Proceedings of the 27th International Conference on Conceptual Modeling (ER 2008), Barcelona, Spain, 2008, vol. 5231, pp. 526–527.
LibreCat: /record/8006
DOI: http://dx.doi.org/10.1007/978-3-540-87877-3_44

M. Wahler and J. Küster, “Predicting Coupling of Object-Centric Business Process Implementations,” in Proceedings of the 6th International Conference on Business Process Management, 2008, vol. 5240, pp. 148–163.
LibreCat: /record/8007
DOI: http://dx.doi.org/10.1007/978-3-540-85758-7