Fechner S, Sieve B. Was wird von mir als Forscher in den Naturwissenschaften erwartet? Die “Forscherwoche” als berufsorientierendes Angebot in den Schulferien. Naturwissenschaften im Unterricht - Chemie. 2014;25(140):45-48.
LibreCat: /record/23769

Hüser N, Kenig E. A new absorption-desorption pilot plant for CO2 Capture. Chemical Engineering Transactions. 2014;39:1417-1422. doi:10.3303/CET1439237
LibreCat: /record/23834
DOI: 10.3303/CET1439237

Hüser N, Kenig E. Konzeption und Validierung einer neuen Technikumsanlage zur Absorption und Desorption von CO2. In: Jahrestreffen der Fachgruppen Extraktion und Fluidverfahrenstechnik; 2014.
LibreCat: /record/23878

Plattner K, Lambert M, Tam N, Lamberts R, Baumeister J. Changes in cortical beta activity related to a biceps brachii movement task while experiencing exercise induced muscle damage. Physiol Behav. 2014;123:1-10. doi:10.1016/j.physbeh.2013.08.022
LibreCat: /record/20388
DOI: 10.1016/j.physbeh.2013.08.022
PMID: 24076418

Krimphove D. Grenzen der Logik . Rechtstheorie. 2014;(Jg. 44):315 – 339.
LibreCat: /record/2039

Plattner K, Lambert M, Tam N, Baumeister J. The response of cortical alpha activity to pain and neuromuscular changes caused by exercise-induced muscle damage. Scand J Med Sci Sports. 2014;24(1):166-178. doi:10.1111/j.1600-0838.2012.01486.x
LibreCat: /record/20394
DOI: 10.1111/j.1600-0838.2012.01486.x
PMID: 22734862

Needle A, Baumeister J, Kaminski T, Higginson J, Farquhar W, Swanik C. Neuromechanical coupling in the regulation of muscle tone and 10.1111/sms.12181__joint stiffness. Scand J Med Sci Sports. 2014;24(5):737-748. doi:10.1111/sms.12181
LibreCat: /record/20398
DOI: 10.1111/sms.12181
PMID: 25371932

Krimphove D. Europas Meister – Der Konflikt nationaler Berufsstandsregelungen mit den europäischen Grundfreiheiten. Wirtschaft und Verwaltung – Themenheft zum Gewerbearchiv . 2014;(Heft 4):234 – 250.
LibreCat: /record/2040

Schubert M, Reinecke K, Pezeshkian A, Fergland D, Reinsberger C, Baumeister J. Das kortikale Abbild sensomotorischer Kontrollprozesse - Grundlagen zur Untersuchung zentraler Ermüdung. 2014;65(7+8):190.
LibreCat: /record/20633

Jakobsmeyer R, Fergland D, Pezeshkian A, Reinsberger C, Heitkamp C, Baumeister J. Veränderte Drop Jump Performance durch ein Maximalkrafttraining auf instabilen Unterstützungsflächen. 2014;66(7+8):230.
LibreCat: /record/20636

Krimphove D, Kruse O. Neue Regeln zur Umsetzung Europäischer Normen. Betriebswirtschaftliche Blätter . 2014.
LibreCat: /record/2087

Krimphove D. Rechtliche Unterstützung für studierwil-lige Care-Leaver. Careleaver Deutschland. 2014;(http://ww.careleaver.de/?page_id=224).
LibreCat: /record/2088

Priesterjahn C, Holtmann J, Meyer M. Smarte Entwicklung fuer smarte Systeme: Softwareentwicklung im Kontext des Gesamtsystems. In: Tagungsband Embedded Software Engineering Kongress 2014. ; 2014:619-627.
LibreCat: /record/20903

Diedrich C, Meyer M, Evertz L, Schäfer W. Dienste in der Automatisierungstechnik. atp edition - Automatisierungstechnische Praxis. 2014:24-35.
LibreCat: /record/20904

Pohlmann U, Holtmann J, Meyer M, Gerking C. Generating Modelica Models from Software Specifications for the Simulation of Cyber-physical Systems. In: Proceedings of the 40th Euromicro Conference on Software Engineering and Advanced Applications (SEAA). IEEE Xplore; 2014.
LibreCat: /record/20905

Fockel M, Holtmann J, Meyer M. Mit Satzmustern hochwertige Anforderungsdokumente effizient erstellen. OBJEKTspektrum. 2014;(RE/2014).
LibreCat: /record/20906

Becker S, Dziwok S, Gerking C, et al. The MechatronicUML Method: Model-Driven Software Engineering of Self-Adaptive Mechatronic Systems. In: Proceedings of the 36th International Conference on Software Engineering (Posters). ACM, New York, NY, USA; 2014.
LibreCat: /record/20907

Pohlmann U, Dziwok S, Meyer M, Tichy M, Thiele S. A Modelica Coordination Pattern Library for Cyber-Physical Systems. In: Proceedings of the 7th International ICST Conference on Simulation Tools and Techniques. ; 2014.
LibreCat: /record/20908

Becker S, Dziwok S, Gerking C, et al. The MechatronicUML Design Method - Process and Language for Platform-Independent Modeling.; 2014.
LibreCat: /record/20909

Pohlmann U, Meyer M, Dann AP, Brink C. Viewpoints and Views in Hardware Platform Modeling for Safe Deployment. In: Proceedings of the 2Nd Workshop on View-Based, Aspect-Oriented and Orthographic Software Modelling. ACM, New York, NY, USA; 2014:23:23-23:30.
LibreCat: /record/20910

Kaiser L, Dumitrescu R, Holtmann J, Meyer M. Automatic Verification of Modeling Rules in Systems Engineering for Mechatronic Systems. In: Volume 2B: 33rd Computers and Information in Engineering Conference. ; 2014. doi:10.1115/detc2013-12330
LibreCat: /record/20912
DOI: 10.1115/detc2013-12330

Ebbert C, Alissawi N, Somsen C, et al. Spectroelectrochemical and morphological studies of the ageing of silver nanoparticles embedded in ultra-thin perfluorinated sputter deposited films. Thin Solid Films. 2014:161-167. doi:10.1016/j.tsf.2014.10.054
LibreCat: /record/20924
DOI: 10.1016/j.tsf.2014.10.054

Albers S, Sureth-Sloane C. Editorial: What Is and What Is Not a Substantial Contribution? Business Research. 2014;5(2).
LibreCat: /record/17962

Luo L. Ein Selbst-Stabilisierender Algorithmus Für Das Finite Sleep Problem in Skip+ Graphen. Universität Paderborn; 2014.
LibreCat: /record/18001

Hinnenthal K. Formbildung Selbstorganisierender Partikelsysteme.; 2014.
LibreCat: /record/18002

Wette P, Karl H. Incorporating feedback from application layer into routing and wavelength assignment algorithms. In: 2013 IEEE Conference on Computer Communications Workshops (INFOCOM WKSHPS). IEEE; 2014. doi:10.1109/infcomw.2013.6970733
LibreCat: /record/1801
DOI: 10.1109/infcomw.2013.6970733

Kamin A-M, Greiner A-D, Darmann-Finck I, Meister DM. Zur Konzeption einer digital unterstützten beruflichen Fortbildung – ein interdisziplinärer Ansatz aus Medienpädagogik und Pflegedidaktik. In: Back A, Baumgartner P, Reinmann G, eds. Interdisziplinäre Zeitschrift für Technologie und Lernen. 1 (1). ; 2014:6-20.
LibreCat: /record/18076

Friedrichs H, Meister DM. Medienerziehung in der Kindertagesstätte. In: Meister DM, von Gross F, Sander U, eds. Enzyklopädie Erziehungswissenschaft Online. Weinheim, Basel: Beltz Juventa; 2014.
LibreCat: /record/18077

Meise B, Meister DM, Hoffmann D. Integrative Perspektiven auf Medien und Bildung zwischen Medienpädagogik und Medienwissenschaften. In: Imort P, Niesyto H, eds. Grundbildung Medien in pädagogischen Studiengängen. München: kopaed; 2014:183-194.
LibreCat: /record/18078

Pöttinger I, Meister DM. School`s out? Informal and formal media education - an international perspective. In: Aßmann S, Meister DM, Pielsticker A, eds. School`s out? Informelle Und Formelle Medienbildung . München: kopaed; 2014:135-137.
LibreCat: /record/18079

Aßmann S, Meister DM, Pielsticker A. School’s out? Informelle und formelle Medienbildung. In: Aßmann S, Meister DM, Pielsticker A, eds. School`s out? Informelle und formelle Medienbildung . München: kopaed; 2014:7-10.
LibreCat: /record/18080

Friedrich C, eafoflu E, Müller M, Schindlmayr A, Blügel S. Spin excitations in solids from many-body perturbation theory. In: Di Valentin C, Botti S, Cococcioni M, eds. First Principles Approaches to Spectroscopic Properties of Complex Materials. Vol 347.10.1007/128_2013_518__Topics in Current Chemistry. Berlin, Heidelberg: Springer; 2014:259-301. doi:10.1007/128_2013_518
LibreCat: /record/18471
DOI: 10.1007/128_2013_518
WoS: 000356811000008
PMID: 24577607

Schindlmayr A. The GW approximation for the electronic self-energy. In: Bach V, Delle Site L, eds. Many-Electron Approaches in Physics, Chemistry and Mathematics. Vol 29.10.1007/978-3-319-06379-9_19__Mathematical Physics Studies. Cham: Springer; 2014:343-357. doi:10.1007/978-3-319-06379-9_19
LibreCat: /record/18472
DOI: 10.1007/978-3-319-06379-9_19

Yanagisawa S, Morikawa Y, Schindlmayr A. Theoretical investigation of the band structure of picene single crystals within the GW approximation. Japanese Journal of Applied Physics. 2014;53(5). doi:10.7567/jjap.53.05fy02
LibreCat: /record/18473
DOI: 10.7567/jjap.53.05fy02
WoS: 000338316200158

Friedrich C, Schindlmayr A. Many-body perturbation theory: The GW approximation. In: Blügel S, Helbig N, Meden V, Wortmann D, eds. Computing Solids: Models, Ab Initio Methods and Supercomputing. Vol 74. Key Technologies. Jülich: Forschungszentrum Jülich; 2014:.1-.21.
LibreCat: /record/18474

Jacob R, W. Richa A, Scheideler C, Schmid S, Täubig H. SKIP*: A Self-Stabilizing Skip Graph. J ACM. 2014;(6):36:1--36:26. doi:10.1145/2629695
LibreCat: /record/1858
DOI: 10.1145/2629695

Derakhshandeh Z, Dolev S, Gmyr R, W. Richa A, Scheideler C, Strothmann TF. Brief announcement: amoebot - a new model for programmable matter. In: 26th ACM Symposium on Parallelism in Algorithms and Architectures, SPAA’14, Prague, Czech Republic - June 23 - 25, 2014. ACM; 2014:220--222. doi:10.1145/2612669.2612712
LibreCat: /record/1863
DOI: 10.1145/2612669.2612712

Delfs P, Herale AA, Li Z, Schmid H-J. Simulation of the Surface Topography on Laser Sintered Polymer Parts. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
LibreCat: /record/22176
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf

Josupeit S, Schmid H-J. Three-dimensional in-process temperature measurement of laser sintered part cakes. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:49-58. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf
LibreCat: /record/22177
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf

Josupeit S, Rüsenberg S, Rupp N, Gessler M, Schmid H-J. Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics. In: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014). Vol 72. ; 2014:2383-2385. doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics
LibreCat: /record/22184
DOI: https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics

Rüsenberg S, Josupeit S, Schmid H-J. A method to characterize the quality of a polymer laser sintering process . Advances in Mechanical Engineering. 2014;6:1687-8140. doi:10.1155/2014/185374
LibreCat: /record/22186
DOI: 10.1155/2014/185374

Josupeit S, Ordia L, Schmid H-J. Development of a Basic Model to Simulate the Laser Sintering Cooling Process. In: International Conference on Additive Technologies. Vol 5. ; 2014:222-227. doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf
LibreCat: /record/22193
DOI: https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf

Delfs P, Schmid H-J. Simulation of the Surface Topography on Laser Sintered Polymer Parts. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
LibreCat: /record/22203
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf

Adam G, Zimmer D. Extension of prior developed design rules (LS). In: ASPE - Spring Topical Meeting 2014. ; 2014. doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering 
LibreCat: /record/22382
DOI: https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering 

Adam G, Zimmer D. Systematic investigations of minimum feature sizes and geometrical accuracies. In: ; 2014.
LibreCat: /record/22383

Adam G, Zimmer D. Design for Additive Manufacturing - Element transitions and aggregated structures. CIRP Journal of Manufacturing Science and Technology. 2014;7(1):20-28. doi:10.1016/j.cirpj.2013.10.001 
LibreCat: /record/22384
DOI: 10.1016/j.cirpj.2013.10.001 

Adam G. Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern. In: ; 2014.
LibreCat: /record/22385

Adam G. Extension of prior developed design rules for laser sintering. In: ; 2014.
LibreCat: /record/22386

Lessmeier C, Enge-Rosenblatt O, Bayer C, Zimmer D. Data Acquisition and Signal Analysis from Measured Motor Currents for Defect Detection in Electromechanical Drive Systems. In: European Conference of the PHM Society 2014 (EPHM14). Prognostics and Health Management Society ; 2014.
LibreCat: /record/22387

Klause A, Zimmer D. Auswahl anwendungsoptimaler Antriebssysteme als Basis für die Komposition von Antriebsbaukästen. Entwerfen - Entwickeln - Erleben 2014 Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik. 2014:619-639.
LibreCat: /record/22388

Strop M, Hölscher C, Zimmer D. Intelligent Operating Strategies for Multi-Motor Drive Systems. In: OPT-i 2014. 1st International Conference on Engineering and Applied Sciences Optimization. Vol 1. Institute of Structural Analyses and Antiseismic Research; 2014:626-663.
LibreCat: /record/22389

Zimmer D, Hölscher C, Strop M. Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme. Newsletter der Wissenschaftlichen Gesellschaft für Produktentwicklung . 2014;1:7-9. doi:http://wigep.de/fileadmin/download/wigep/WiGeP_News_2014_1.pdf
LibreCat: /record/22390
DOI: http://wigep.de/fileadmin/download/wigep/WiGeP_News_2014_1.pdf

Klause A, Zimmer D. Konzeption von Antriebssystembaukästen auf der Basis von branchenspezifischen Antriebslösungen. Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe . 2014;66(5):61&;66.
LibreCat: /record/22391

Hölscher C, Zimmer D. Intelligent Drive Module (IDM). Springer Verlag (Lecture Notes in Mechanical Engineering); 2014:33-36. doi:10.1007/978-3-642-45435-6
LibreCat: /record/22392
DOI: 10.1007/978-3-642-45435-6

Hölscher C, Keßler JH, Meyer T, Rasche C, Reinold P, Sextro W. Application of Self-Optimizing Systems. Springer Verlag (Lecture Notes in Mechanical Engineering); 2014:16-21. doi:10.1007/978-3-642-53742-4
LibreCat: /record/22393
DOI: 10.1007/978-3-642-53742-4

Bald I, Keller A. Molecular Processes Studied at a Single-Molecule Level Using DNA Origami Nanostructures and Atomic Force Microscopy. Molecules. 2014;19:13803-13823. doi:10.3390/molecules190913803
LibreCat: /record/22683
DOI: 10.3390/molecules190913803

Arifulina S, Becker M, Platenius MC, Walther S. SeSAME: Modeling and Analyzing High-Quality Service Compositions. In: Proceedings of the 29th IEEE/ACM International Conference on Automated Software Engineering (ASE 2014). New York, NY, USA: ACM; 2014:839-842. doi:10.1145/2642937.2648621
LibreCat: /record/22736
DOI: 10.1145/2642937.2648621

Becker M, Becker S, Besova G, Walther S, Wehrheim H. Towards Systematic Configuration for Architecture Validation. In: Proceedings of the 40th Euromicro Conference on Software Engineering and Advanced Applications (SEAA) (Work in Progress Session). IEEE; 2014.
LibreCat: /record/22740

Becker M, Platenius MC, Becker S. Cloud Computing Reduces Uncertainties in Quality-of-Service Matching! In: Proceedings of the 2nd International Workshop on Cloud Service Brokerage (CSB). Communications in Computer and Information Science. Berlin/Heidelberg, Germany: Springer; 2014:153-159. doi:10.1007/978-3-319-14886-1_15
LibreCat: /record/22741
DOI: 10.1007/978-3-319-14886-1_15

Knauss A, Mu\'7enoz-Fern\rquote andez JC, Casta\'7eneda L, et al. 2.3 Artifact-Centric Requirements Engineering for Self-Adaptive Systems. In: Report from the GI Dagstuhl Seminar 14433: Software Engineering for Self-Adaptive Systems. ; 2014:7.
LibreCat: /record/22743

Lehrig S, Becker M. Approaching the Cloud: Using Palladio for Scalability, Elasticity, and Efficiency Analyses. In: Proceedings of the Symposium on Software Performance (SOSP). ; 2014.
LibreCat: /record/22744

Kühn A, Bremer C, Dumitrescu R, Gausemeier J. Feature models supporting trade-off decisions in early mechatronic systems design. In: NordDesign 2014, Espoo, Finnland, 27. - 29. Aug. 2014. ; 2014.
LibreCat: /record/22903

Gausemeier J, Dumitrescu R, Jasperneite J, Kühn A, Trsek H. Der Spitzencluster it’s OWL auf dem Weg zur Industrie 4.0. ZWF - Zeitschrift für Wirtschaftlichen Fabrikbetrieb. 2014:336-346.
LibreCat: /record/22904

Mahadhir KA, Tan SC, Low C, Dumitrescu R, Amin ATM, Jaffar A. Terrain Classification for Track-driven Agricultural Robots. Procedia Technology. 2014:776-783.
LibreCat: /record/22905

Dorociak R, Dumitrescu R, Gausemeier J, Iwanek P. Specification Technique CONSENS for the Description of Self-optimizing Systems. In: Gausemeier J, Rammig F-J, Schäfer W, eds. Design Methodology for Intelligent Technichal Systems. Springer; 2014.
LibreCat: /record/22906

Kühn A, Kliewe D, Dumitrescu R, Gausemeier J. Strategy controlling for innovation clusters - the example of ’s OWL.” In: ISPIM Conference 2014. ; 2014.
LibreCat: /record/22907

Dumitrescu R, Fechtelpeter C, Kühn A. Systematische Berücksichtigung von Fertigungsanforderungen im Model-Based Systems Engineering. In: Maurer M, Schulze S-O, eds. Tag des Systems Engineering, Bremen. München: Carl Hanser Verlag; 2014.
LibreCat: /record/22908

Rabe M, Anacker H, Dumitrescu R. Methodology for the identification of solution patterns within mechatronic systems. In: Proceedings of the 15th International Workshop on Research and Education in Mechatronics (REM), El Gouna, Egypt. ; 2014.
LibreCat: /record/22909

Tschirner C, Kaiser L, Dumitrescu R, Gausemeier J. Collaboration in Model-Based Systems Engineering based on Application Scenarios. In: NordDesign 2014. ; 2014.
LibreCat: /record/22910

Jürgenhake C, Fechtelpeter C, Dumitrescu R, Heidsiek D. Optimized process sequences for prototyping of molded interconnect devices. Advanced Materials Research. 2014:19-27.
LibreCat: /record/22911

Schierbaum T, Gausemeier J, Dumitrescu R. Method for the Identification and Comparison of Alternative Process Chains Focusing on Economics Efficiency Analysis during the Conceptual Design of Mechatronic Integrated Devices. Advanced Materials Research. 2014:3-9.
LibreCat: /record/22912

Frieben T, Trächtler A. Virtual Commissioning by Means of an Adaptive Selection of the Modeling Depth. In: Proceedings of the ASME 2014 International Mechanical Engineering Congress &; Exposition IMEC, Montreal, Québec, Canada. ; 2014.
LibreCat: /record/23080

Kruse D, Schweers C, Trächtler A. Methodology for a Partly Automated Parameter Identification for the Validation of Multi-Domain Models. In: Proceedings of the ASME 2014 International Mechanical Engineering Congress &; Exposition IMECE 2014. Montreal, Québec, Canada; 2014.
LibreCat: /record/23081

Lochbichler M, Oestersötebier F, Trächtler A. Dynamic Behavior Models and their Modeling Depth in the Design Process of Mechatronic Systems. In: Proceedings of the ASME 2014 International Mechanical Engineering Congress &; Exposition IMECE 2014. Montreal, Québec, Canada; 2014.
LibreCat: /record/23082

Kromov I, Deter M, Trächtler A. Ansätze zur Regelung eines elektronischen Lastemulators für die Hardware-in-the-Loop-Simulation von Antriebsreglern auf Leistungsebene. In: SPS IPC Drives. ; 2014.
LibreCat: /record/23083

Shareef Z, Trächtler A. Optimal Trajectory Planning for Robotic Manipulators Using Discrete Mechanics and Optimal Control. In: Multi-Conference on Systems and Control (MSC) / 23rd Conference on Control Applications (CCA). Antibes, France: IEEE; 2014.
LibreCat: /record/23084

Damerow U-H, Borsig M, Tabakajew D, Schaermann W, Homberg W, Trächtler A. Analysis of high speed bending operations as basis for integrating self-correcting components to increase process reliability. In: Procedia Engineering 81. 11th International Conference on Technology of Plasticity. Elsevier; 2014:831-836.
LibreCat: /record/23085

Krüger M. Parametrische Modellordnungsreduktion für hierarchische selbstoptimierende Systeme. In: Workshop GMA-Fachausschuss 1.30. Anif / Salzburg; 2014.
LibreCat: /record/23086

Al Qaisi I, Zimmermann D, Kohlstedt A, Gausemeier S, Trächtler A. Subjective Evaluation of Different Motion Cueing Algorithms Implemented on ATMOS Driving Simulator. In: Driving Simulation Conference 2014. ; 2014.
LibreCat: /record/23087

Wuthishuwong C, Trächtler A. Consensus coordination for multiple autonomous intersection management. In: Tagungsband 9. Dortmunder AutoTag. Technische Universität Dortmund; 2014.
LibreCat: /record/23088

Just V. Modellbasierte Analyse Und Regelungstechnische Maßnahmen Zur Optimierung Des Vereinzelungsvorgangs in Bankautomaten. Paderborn: Universitaetsbibliothek Paderborn; 2014.
LibreCat: /record/23089

Wuthishuwong C, Trächtler A. Stability of the consensus in the network of multiple Autonomous Intersections Management. In: Proc. 20th International Conference on Automation and Computing (ICAC). Cranfield, UK: IEEE; 2014.
LibreCat: /record/23090

Shareef Z, Trächtler A. Simultaneous Path Planning and Trajectory Optimization for Robotic Manipulators using Discrete Mechanics and Optimal Control. Robotica. 2014.
LibreCat: /record/23091

Wuthishuwong C, Trächtler A. Consensus Coordination in the Network of Autonomous Intersection Management. In: Proc. 11th International Conference on Informatics in Control Automation and Robotics ICINCO. Wien: IEEE; 2014.
LibreCat: /record/23092

Flottmeier S, Olma S, Trächtler A. Sliding Mode and Continuous Estimation Techniques for the Realization of Advanced Control Strategies for Parallel Kinematics . In: Proceedings of the 19th IFAC World Congress. Cape Town, South Africa; 2014.
LibreCat: /record/23093

Kessler JH, Trächtler A. Control of Pareto Points for Self-Optimizing Systems with Limited Objective Values. In: The 19th IFAC World Congress. Cape Town, South Africa; 2014.
LibreCat: /record/23094

Shareef Z, Trächtler A. Joint Selection Criterion for Optimal Trajectory Planning for Robotic Manipulators Using Dynamic Programming. In: 19th IFAC World Congress. Cape Town, South Africa; 2014.
LibreCat: /record/23095

Pai A, Krooß P, Niendorf T, Koke I, Trächtler A, Schaper M. Analyses of the stress-strain behaviour of SMAs under cyclical loading conditions – implementation of a novel phenomenological constitutive model. In: Posterbeitrag ICOMAT - International Conference on Martensitic Transformations, Juli 2014, Bilbao, Spanien. ; 2014.
LibreCat: /record/23096

Damerow U-H, Tabakajew D, Borsig M, Schaermann W, Homberg W, Trächtler A, eds. Concept for a Self-Correcting Sheet Metal Bending Operation. Vol Volume 15. Elsevier; 2014.
LibreCat: /record/23097

Shareef Z, Just V, Teichrieb H, Trächtler A. Design and Control of a Vertical Ball Juggling Delta Robot without Visual Guidance. In: 13th International Conference on Intelligent Autonomous Systems. Padova, Italy: Springer-Verlag; 2014.
LibreCat: /record/23098

Abrishamchian F, Trächtler A. Configuration of Mechatronic Systems Using Feature Models. In: 2nd International Conference on System-Integrated Intelligence. Bremen, Germany: Universität Bremen; 2014:27-34.
LibreCat: /record/23099

Schaermann W, Borsig M, Trächtler A, et al., eds. Selbstkorrigierende Biegeprozesse in Der Umformtechnik. VDI- Verlag, Düsseldorf; 2014.
LibreCat: /record/23100

Kessler JH, Krüger M, Trächtler A. Continuous Objective-based Control for Self-Optimizing Systems with Changing Operation Modes. In: 13th European Control Conference (ECC). Strasbourg, France; 2014:2096-2102.
LibreCat: /record/23101

Gausemeier J, Trächtler A, Schäfer W, et al. Semantische Technologien Im Entwurf Mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München: Carl Hanser Verlag; 2014.
LibreCat: /record/23102

Krüger M, Borsig M, Schaermann W. Model-based design of self-correcting forming processes. In: KoMSO Challenge Workshop Math for the Digital Factory. Berlin; 2014.
LibreCat: /record/23103

Borsig M, Trächtler A, eds. RAILCAB – THE INNOVATIVE PLATFORM FOR DESIGN AND TEST OF NEW RAILWAY TECHNOLOGIES. Moscow State University of Railway Engineering; 2014.
LibreCat: /record/23104

Flottmeier S, Jäker K-P, Trächtler A. Test Rig for the Hardware-in-the-Loop Simulation of Mechatronic Axles. In: Proceedings of the 9th International Fluid Power Conference. Vol 3. ; 2014:366-377.
LibreCat: /record/23105

Oestersötebier F, Wang P, Trächtler A. A Modelica Contact Library for Idealized Simulation of Independently Defined Contact Surfaces. In: 10th International Modelica Conference. Lund, Sweden; 2014.
LibreCat: /record/23106

Klocke F, Trächtler A, Henke C. 3.1 Sensoren für die digitale Produktion. In: Integrative Produktion - Industrie 4.0. Shaker Verlag; 2014:271-296.
LibreCat: /record/23107

Flaßkamp K, Grösbrink S, Hartmann P, et al. Development of the RailCab Vehicle. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2014:184-190.
LibreCat: /record/23108