N. Ho, P. Kaufmann, and M. Platzner, “A hardware/software infrastructure for performance monitoring on LEON3 multicore platforms,” in 24th Intl. Conf. on Field Programmable Logic and Applications (FPL), 2014, pp. 1–4.

N. Ho, P. Kaufmann, and M. Platzner, “Towards self-adaptive caches: A run-time reconfigurable multi-core infrastructure,” in 2014 IEEE Intl. Conf. on Evolvable Systems (ICES), 2014, pp. 31–37.

F. König, EMG-basierte simultane und proportionale Online-Steuerung einer virtuellen Prothese. Paderborn University, 2014.

B. Koch, Hardware Acceleration of Mechatronic Controllers on a Zynq Platform FPGA. Paderborn University, 2014.

R. Mittendorf, Advanced AES-key recovery from decayed RAM using multi-threading and FPGAs. Paderborn University, 2014.

C. Rüthing, The Xilinx Zynq Architecture as a Platform for Reconfigurable Heterogeneous Multi-Cores. Paderborn University, 2014.

L. Schäfers, Parallel Monte-Carlo Tree Search for HPC Systems and its Application to Computer Go. Berlin: Logos Verlag Berlin GmbH, 2014.

C. Shen, P. Kaufmann, and M. Braun, “Optimizing the Generator Start-up Sequence After a Power System Blackout,” in IEEE Power and Energy Society General Meeting (IEEE GM), 2014.

C. Shen, P. Kaufmann, and M. Braun, “A New Distribution Network Reconfiguration and Restoration Path Selection Algorithm,” in Power Systems Computation Conference (PSCC), 2014.

S. Surmund, Multithreaded Parallelization of Mechatronic Controllers on a Zynq Platform FPGA. Paderborn University, 2014.

A. I. Esparcia-Alc\rquote azar et al., Applications of Evolutionary Computation - 17th European Conference, EvoApplications, vol. 8602. Granada, Spain: Springer, 2014.

J. Anwer and M. Platzner, “Analytic reliability evaluation for fault-tolerant circuit structures on FPGAs,” in IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFT), 2014, pp. 177–184.

H. Ghasemzadeh Mohammadi, P.-E. Gaillardon, M. Yazdani, and G. De Micheli, “Fast process variation analysis in nano-scaled technologies using column-wise sparse parameter selection,” in 2014 IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH), 2014, pp. 163–168.

M. Trier and A. Richter, “The deep structure of organizational online networking - an actor-oriented case study,” Information Systems Journal, pp. 465–488, 2014.

A. Chinaev, M. Puels, and R. Haeb-Umbach, “Spectral Noise Tracking for Improved Nonstationary Noise Robust ASR,” in 11. ITG Fachtagung Sprachkommunikation (ITG 2014), 2014.

L. Drude, A. Chinaev, D. H. Tran Vu, and R. Haeb-Umbach, “Source Counting in Speech Mixtures Using a Variational EM Approach for Complexwatson Mixture Models,” in 39th International Conference on Acoustics, Speech and Signal Processing (ICASSP 2014), 2014.

L. Drude, A. Chinaev, D. H. Tran Vu, and R. Haeb-Umbach, “Towards Online Source Counting in Speech Mixtures Applying a Variational EM for Complex Watson Mixture Models,” in 14th International Workshop on Acoustic Signal Enhancement (IWAENC 2014), 2014, pp. 213–217.

J. Heymann, O. Walter, R. Haeb-Umbach, and B. Raj, “Iterative Bayesian Word Segmentation for Unspuervised Vocabulary Discovery from Phoneme Lattices,” in 39th International Conference on Acoustics, Speech and Signal Processing (ICASSP 2014), 2014.

F. Jacob and R. Haeb-Umbach, “Coordinate Mapping Between an Acoustic and Visual Sensor Network in the Shape Domain for a Joint Self-Calibrating Speaker Tracking,” in 11. ITG Fachtagung Sprachkommunikation (ITG 2014), 2014.

V. Leutnant, A. Krueger, and R. Haeb-Umbach, “A New Observation Model in the Logarithmic Mel Power Spectral Domain for the Automatic Recognition of Noisy Reverberant Speech,” IEEE/ACM Transactions on Audio, Speech, and Language Processing, vol. 22, no. 1, pp. 95–109, 2014.

J. Li, L. Deng, Y. Gong, and R. Haeb-Umbach, “An Overview of Noise-Robust Automatic Speech Recognition,” IEEE Transactions on Audio, Speech and Language Processing, vol. 22, no. 4, pp. 745–777, 2014.

O. Walter, V. Despotovic, R. Haeb-Umbach, J. Gemmeke, B. Ons, and H. Van hamme, “An Evaluation of Unsupervised Acoustic Model Training for a Dysarthric Speech Interface,” in INTERSPEECH 2014, 2014.

M. Berger, F. Erlacher, C. Sommer, and F. Dressler, “Adaptive load allocation for combining Anomaly Detectors using controlled skips,” in 2014 International Conference on Computing, Networking and Communications (ICNC), 2014.

B. Bloessl, M. Segata, C. Sommer, and F. Dressler, “Towards an Open Source IEEE 802.11p stack: A full SDR-based transceiver in GNU Radio,” in 2013 IEEE Vehicular Networking Conference, 2014.

B. Bloessl, A. Puschmann, C. Sommer, and F. Dressler, “Timings matter,” in Proceedings of the 9th ACM international workshop on Wireless network testbeds, experimental evaluation and characterization - WiNTECH ’14, 2014.

F. Dressler, P. Handle, and C. Sommer, “Towards a vehicular cloud - using parked vehicles as a temporary network and storage infrastructure,” in Proceedings of the 2014 ACM international workshop on Wireless and mobile technologies for smart cities - WiMobCity ’14, 2014.

J. Eckert, C. Sommer, and D. Eckhoff, “Towards a simulation framework for paraglider networks,” in Proceedings of the 11th ACM symposium on Performance evaluation of wireless ad hoc, sensor, &; ubiquitous networks - PE-WASUN ’14, 2014.

D. Eckhoff, F. Dressler, and C. Sommer, “SmartRevoc: An efficient and privacy preserving revocation system using parked vehicles,” in 38th Annual IEEE Conference on Local Computer Networks, 2014.

D. Eckhoff and C. Sommer, “Driving for Big Data? Privacy Concerns in Vehicular Networking,” IEEE Security &; Privacy, pp. 77–79, 2014.

F. Erlacher, F. Klingler, C. Sommer, and F. Dressler, “On the impact of street width on 5.9 GHz radio signal propagation in vehicular networks,” in 2014 11th Annual Conference on Wireless On-demand Network Systems and Services (WONS), 2014.

F. Malandrino, C. Casetti, C.-F. Chiasserini, C. Sommer, and F. Dressler, “The Role of Parked Cars in Content Downloading for Vehicular Networks,” IEEE Transactions on Vehicular Technology, pp. 4606–4617, 2014.

M. Segata, B. Bloessl, S. Joerer, C. Sommer, R. Lo Cigno, and F. Dressler, “Short paper: Vehicle shadowing distribution depends on vehicle type: Results of an experimental study,” in 2013 IEEE Vehicular Networking Conference, 2014.

M. Segata, B. Bloessl, C. Sommer, and F. Dressler, “Towards energy efficient smart phone applications: Energy models for offloading tasks into the cloud,” in 2014 IEEE International Conference on Communications (ICC), 2014.

C. Sommer, F. Hagenauer, and F. Dressler, “A networking perspective on self-organizing intersection management,” in 2014 IEEE World Forum on Internet of Things (WF-IoT), 2014.

L.-C. Tung, J. Mena, M. Gerla, and C. Sommer, “A cluster based architecture for intersection collision avoidance using heterogeneous networks,” in 2013 12th Annual Mediterranean Ad Hoc Networking Workshop (MED-HOC-NET), 2014.

S. Hellebrand, T. Indlekofer, M. Kampmann, M. A. Kochte, C. Liu, and H.-J. Wunderlich, “FAST-BIST: Faster-than-at-Speed BIST Targeting Hidden Delay Defects,” in IEEE International Test Conference (ITC’14), 2014.

T. Busjahn, R. Bednarik, and C. Schulte, “What influences dwell time during source code reading?: analysis of element type and frequency as factors,” in ETRA, 2014, pp. 335–338.

T. Busjahn et al., “Eye tracking in computing education,” in ICER, 2014, pp. 3–10.

T. Busjahn, C. Schulte, and E. Kropp, “Developing Coding Schemes for Program Comprehension using Eye Movements,” in PPIG, 2014, p. 15.

C. Schulte, M. E. Caspersen, and J. Gal-Ezer, Eds., Proceedings of the 9th Workshop in Primary and Secondary Computing Education, WiPSCE 2014, Berlin, Germany, November 5-7, 2014. ACM, 2014.

H. Riesen, C. Wiebeler, and S. Schumacher, “Optical Spectroscopy of Graphene Quantum Dots: The Case of 2,” The Journal of Physical Chemistry A, pp. 5189–5195, 2014.

C. Wiebeler and S. Schumacher, “Quantum Yields and Reaction Times of Photochromic Diarylethenes: Nonadiabatic Ab Initio Molecular Dynamics for Normal- and Inverse-Type,” The Journal of Physical Chemistry A, pp. 7816–7823, 2014.

P. Lewandowski et al., “Formation and control of transverse patterns in a quantum fluid of microcavity polaritons,” in Ultrafast Phenomena and Nanophotonics XVIII, 2014.

C. Meyer, J. Somorovsky, E. Weiss, J. Schwenk, S. Schinzel, and E. Tews, “Revisiting SSL/TLS Implementations: New Bleichenbacher Side Channels and Attacks,” in 23rd USENIX Security Symposium (USENIX Security 14), 2014, pp. 733–748.

M.-H. Chen, W.-F. Chen, and L.-W.  Ku, “RESOLVE: An Emotion Word Suggestion System Facilitates Language Learners’ Emotional Expressions,” in Proceedings of the AsiaCALL 2014, 2014.

A. Maßbaum and C. Sureth-Sloane, “Thin Capitalization Rules and Entrepreneurial Capital Structure Decisions,” Business Research, vol. 2, no. 2, pp. 147–169, 2014.

S. Böttcher, R. Hartel, and S. Thiele, “Difference Computation for Grammar-Compressed XML Data,” in Proceedings of the Second Australasian Web Conference, 2014, pp. 3–12.

S. Böttcher, M. Brandenburg, and R. Hartel, “Keyword Search on DAG-Compressed XML Data,” in Proceedings of the Second Australasian Web Conference, 2014, pp. 13–20.

S. Böttcher, R. Hartel, and J. Rabe, “Efficient XML Keyword Search Based on DAG-Compression,” in Database and Expert Systems Applications - 25th International Conference, DEXA 2014, 2014, pp. 122–137.

T. Niendorf et al., “Functionally Graded Alloys Obtained by Additive Manufacturing,” Advanced Engineering Materials, pp. 857–861, 2014.

A. Riemer, S. Leuders, M. Thöne, H. A. Richard, T. Tröster, and T. Niendorf, “On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting,” Engineering Fracture Mechanics, pp. 15–25, 2014.

M. Agarwal, A. Fallah Tehrani, and E. Hüllermeier, “Preference-based learning of ideal solutions in TOPSIS-like decision models,” Journal of Multi-Criteria Decision Analysis, vol. 22, no. 3–4, 2014.

T. Krotzky, T. Fober, E. Hüllermeier, and G. Klebe, “Extended graph-based models for enhanced similarity search in Cabase,” IEEE/ACM Transactions of Computational Biology and Bioinformatics, vol. 11, no. 5, pp. 878–890, 2014.

E. Hüllermeier, “Learning from imprecise and fuzzy observations: Data disambiguation through generalized loss minimization,” International Journal of Approximate Reasoning, vol. 55, no. 7, pp. 1519–1534, 2014.

S. Henzgen, M. Strickert, and E. Hüllermeier, “Visualization of evolving fuzzy-rule-based systems,” Evolving Systems, vol. 5, pp. 175–191, 2014.

R. Busa-Fekete, B. Szörenyi, P. Weng, W. Cheng, and E. Hüllermeier, “Preference-based reinforcement learning: evolutionary direct policy search using a preference-based racing algorithm.,” Machine Learning, vol. 97, no. 3, pp. 327–351, 2014.

G. Krempl et al., “Open challenges for data stream mining research,” SIGKDD Explorations, vol. 16, no. 1, pp. 1–10, 2014.

M. Strickert, K. Bunte, F. M. Schleif, and E. Hüllermeier, “Correlation-based embedding of pairwise score data,” Neurocomputing, vol. 141, pp. 97–109, 2014.

A. Shaker and E. Hüllermeier, “Survival analysis on data streams: Analyzing temporal events in dynamically changing environments,” International Journal of Applied Mathematics and Computer Science, vol. 24, no. 1, pp. 199–212, 2014.

R. Senge et al., “Reliable classification: Learning classifiers that distinguish aleatoric and epistemic uncertainty,” Information Sciences, vol. 255, pp. 16–29, 2014.

N. Donner-Banzhoff, J. Haasenritter, E. Hüllermeier, A. Viniol, S. Bösner, and A. Becker, “The comprehensive diagnostic study is suggested as a design to model the diagnostic process,” Journal of Clinical Epidemiology, vol. 2, no. 67, pp. 124–132, 2014.

M. Klein et al., “Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids,” presented at the International Conference: Euro Hybrid Materials and Structures, Stade, 2014, pp. 188–193.

M. Frantz et al., “Efficient manufacturing of hybrid structures consisting of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung,” presented at the New Developments in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung), Stuttgart, 2014.

G. Donati et al., “Observing optical coherence across Fock layers with weak-field homodyne detectors,” Nature Communications, 2014.

H. Block, T. Marten, and T. Tröster, “Crash simulation of high strength automotive components using advanced failure models,” presented at the 4th international conference on steels in cars and trucks, Braunschweig, 2014.

C. Lauter, J. Niewel, and T. Tröster, “Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications,” International Journal of Automotive Composites, 2014.

C. Lauter, Entwicklung und Herstellung von Hybridbauteilen aus Metallen und Faserverbundkunststoffen für den Leichtbau im Automobil, vol. 4. Aachen: Shaker Verlag, 2014.

H. Block, T. Marten, N. Weiß Borkowski, and T. Tröster, “Crash performance of the new press hardenable steel 15Mn,” presented at the 3rd MATFEM conference, Hohenkammer, 2014.

C. Reuter, D. Flore, S. Pöhler, K. H. Sauerland, and T. Tröster, “Numerical simulation of the energy absorption of fiber-reinforced plastics,” presented at the Tagungsband NAFEMS Seminar: Simulation of Composites – A Closed Process Chain, Leipzig, 2014.

N. Weiß Borkowski, T. Marten, and T. Tröster, “Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch,” presented at the Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband Werkstoffprüfung 2014, Berlin, 2014.

S. Leuders, A. Riemer, H. A. Richard, T. Tröster, and T. Niendorf, “Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent defects on the initiation and propagation of fatigue cracks,” presented at the 25th Colloquium on Fatigue Mechanisms, Erlangen, Germany, 2014.

S. Leuders, T. Tröster, F. Brenne, A. Riemer, H. A. Richard, and T. Niendorf, “Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting,” presented at the American Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, San Francisco, California, USA, 2014.

S. Leuders, T. Tröster, A. Riemer, H. A. Richard, and T. Niendorf, “On the mechanical performance of structures manufactured by selective laser melting: Damage initiation and propagation,” presented at the Additive Manufacturing with Powder Metallurgy Conference, Orlando, Florida, USA, 2014.

M. Mutschlechner, F. Klingler, F. Erlacher, F. Hagenauer, M. Kiessling, and F. Dressler, “Reliable communication using Erasure Codes for monitoring bats in the wild,” in 2014 IEEE Conference on Computer Communications Workshops (INFOCOM WKSHPS), 2014.

F. Erlacher, F. Klingler, C. Sommer, and F. Dressler, “On the impact of street width on 5.9 GHz radio signal propagation in vehicular networks,” in 2014 11th Annual Conference on Wireless On-demand Network Systems and Services (WONS), 2014.

T. Lukovszki and F. Meyer auf der Heide, “Fast Collisionless Pattern Formation by Anonymous, Position-Aware Robots,” in Lecture Notes in Computer Science, Cham, 2014.

S. Abshoff and F. Meyer auf der Heide, “Continuous Aggregation in Dynamic Ad-Hoc Networks,” in Structural Information and Communication Complexity, Cham, 2014.

F. Bause, A. Schroder, J. Rautenberg, B. Henning, and H. Gravenkamp, “Time-causal material modeling in the simulation of guided waves in circular viscoelastic waveguides,” in 2014 IEEE International Ultrasonics Symposium, 2014.

F. Bause, D. Weber, J. Rautenberg, and B. Henning, “Unsicherheitsanalyse eines Vorwärtsmodells zur Simulation transienter Wellenausbreitung im Hohlzylinder,” presented at the 17. ITG/GMA-Fachtagung Sensoren und Messsysteme, Nürnberg, 2014.

F. Bause, C. Brückner, J. Miedl, and B. Henning, “Model based sensitivity analysis of Leaky-Lamb wave propagation to the variation of viscous lubricant properties,” in Beiträge der 17. ITG/GMA-Fachtagung, 2014.

C. Hoof, S. Appelhans, and B. Henning, “Modellgestützte Analyse des Trocknungsverhaltens von Dispersionslacken aus Daten einer NIR-Multidetektoranordnung,” presented at the 17. ITG/GMA-Fachtagung Sensoren und Messsysteme, Nürnberg, 2014.

C. Unverzagt and B. Henning, “Sensitivitätssteigerung im Rahmen eines inversen Ansatzes zur Materialparameterbestimmung für Piezokeramiken durch Elektrodenmodifikationen,” 2014, pp. 95–102.

H. Gravenkamp, F. Bause, and S. Chongmin, “On the computation of dispersion curves for axisymmetric elastic waveguides using the Scaled Boundary Finite Element Method,” Computers and Structures, vol. 131, pp. 46–55, 2014.

S. Hellebrand and H.-J. Wunderlich, “SAT-Based ATPG beyond Stuck-at Fault Testing,” DeGruyter Journal on Information Technology (it), vol. 56, no. 4, pp. 165–172, 2014.

L. Rodriguez Gomez, A. Cook, T. Indlekofer, S. Hellebrand, and H.-J. Wunderlich, “Adaptive Bayesian Diagnosis of Intermittent Faults,” Journal of Electronic Testing - Theory and Applications (JETTA), vol. 30, no. 5, pp. 527–540, 2014.

T. Graf and M. Platzner, “Common Fate Graph Patterns in Monte Carlo Tree Search for Computer Go,” in 2014 IEEE Conference on Computational Intelligence and Games, 2014, pp. 1–8.

G. Sonnenrein, A. Elsner, E. Baumhögger, A. Morbach, K. Fieback, and J. Vrabec, “Reducing the power consumption of household refrigerators through the integration of latent heat storage elements in wire-and-tube condensers,” International Journal of Refrigeration, pp. 154–160, 2014.

F. H. Dubberke, D. B. Rasche, E. Baumhögger, and J. Vrabec, “Apparatus for the measurement of the speed of sound of ammonia up to high temperatures and pressures,” Review of Scientific Instruments, 2014.

D. Gorenflo, E. Baumhögger, G. Herres, and S. Kotthoff, “Prediction methods for pool boiling heat transfer: A state-of-the-art review,” International Journal of Refrigeration, pp. 203–226, 2014.

M. Trier, S. Behrendt, and A. Richter, “Mixed methods analysis of enterprise social networks,” Computer Networks, vol. 75, pp. 560–577, 2014.

F. Bause, M. Webersen, J. Rautenberg, and B. Henning, Modeling and inverse identification of a high bandwidth ultrasonic measurement setup based on piezoelectric 1-3 composites. 2014.

F. Bause, M. Webersen, J. Rautenberg, and B. Henning, Modellbasierte inverse Identifikation von Ultraschall-Transducern anhand der elektrischen Eingangsimpendanz. 2014.

S. Behrendt, A. Richter, and M. Trier, “Mixed methods analysis of enterprise social networks,” Computer Networks, pp. 560–577, 2014.

M. Trier, M. Müller, and A. Bobrik, “Der richtige Ansprechpartner im dynamischen Interaktionsnetzwerk,” HMD Praxis der Wirtschaftsinformatik, pp. 85–93, 2014.

M. Herzog and M. Trier, “MEDIA ENGINEERING WITH A CONTENT HUB SYSTEM. GENERIC CONTENT TRANSFORMATION FOR MOBILE MEDIA,” International Journal of Computing, vol. 7, no. 2, pp. 108–115, 2014.

S. Behrendt, A. Richter, S. Schäfer, and M. Trier, “Business Intelligence 2.0,” in Vernetzte Organisation, A. Richter, Ed. Tyskland: De Gruyter, 2014, pp. 318–329.

D. Wagner, A. Richter, M. Trier, and H.-T. Wagner, “Towards a Conceptualization of Online Community Health,” in Proceedings of the 35th International Conference on Information Systems. ICIS 2014, 2014.

Y. Li, S. Sanna, and W. G. Schmidt, “Modeling intrinsic defects in LiNbO3 within the Slater-Janak transition state model,” The Journal of Chemical Physics, 2014.

R. Hölscher, W. G. Schmidt, and S. Sanna, “Modeling LiNbO3 Surfaces at Ambient Conditions,” The Journal of Physical Chemistry C, pp. 10213–10220, 2014.

M. Schubert and E. Steffen, “The set of circular flow numbers of regular graphs,” J. Graph Theory, vol. 76, pp. 297–308, 2014.