Krimphove, Dieter. “Banken- Und Wirtschaftskrisen Als eMotor“Der Entwicklung Des Bank- Und Kapitalmarktrechts“.” Zeitschrift Für Das Gesamte Kreditwesen, , no. Heft 22, 2015, pp. 1115 3 1123.

Krimphove, Dieter. “Die Banalität Des Bösen.” Rechtstheorie, no. 46. Bd., Heft 2, Dunker und Humblot, 2015, pp. 263 – 279.

Reinecke, K., et al. Evaluation Eines Trainingsprogramms Zur Verbesserung Der Kardiovaskulären Risikofaktoren Bei Feuerwehrleuten. Vol. 66, no. 7+8, 2015, p. 187.

Schubert, M., et al. Kortikale Netzwerkdynamik Motorischer Kontrollprozesse - Grundlage Zur Unterscuhung Zentraler Ermüdung. Vol. 66, no. 7+8, 2015, p. 195.

Flore, Z., et al. Neurophysiologische Biomarker Im Leistungsfußball: Eine Pilotuntersuchung. Vol. 66, no. 7+8, 2015, p. 189.

Reinecke, K., et al. “Talentdiagnostik Im Nachwuchslesitungsfußball: Eine Retrospektive Analyse Zur Ermittlung Der Toptalente Innerhalb Der .” Moving Minds - Crossing Boundaries in Sport Science, 2015.

Schubert, M., et al. Event-Related Causality in a Cortical Sensorimotor Control Network during Precise Finger Force Generations. 2015.

Schäfer, Wilhelm, et al. Seminar Theses of the Project Group Cybertron. 2015.

Geismann, Johannes. Multi-Core Execution of Safety-Critical Component-Based Software. Universität Paderborn, Heinz Nixdorf Institut, Softwaretechnik, 2015.

Krimphove, Dieter, and Gabriel M. Lentner. “Logic as an Inherent Principle of International Law and Its Consequences for International Adjudication.” Jusletter, no. www.jusletter.it.eu, 2015.

Holtmann, Jörg, et al. “Integrated Systems Engineering and Software Requirements Engineering for Technical Systems.”10.1145/2785592.2785597__Proceedings of the 2015 International Conference on Software and System Process, 2015, doi:10.1145/2785592.2785597.

Meyer, Jan, et al. “Generierung von AUTOSAR-Modellen Aus UML-Spezifikationen.” 10. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., vol. 343, Heinz Nixdorf Institut, 2015, pp. 159–172.

Alberternst, Stephan, and Caren Sureth-Sloane. The Effect of Taxes on Corporate Financing Decisions - Evidence from the German Interest Barrier. 2015.

Götte, Thorsten. Covering and Bridging Im Selbstorganisierenden Partikelsystem Amoebabot. Universität Paderborn, 2015.

Isenberg, Daniel. 3D-Nesting in Der SLM-Technologie. 2015.

Korfmacher, Christian. Implementierung Und Analyse von Cone-DHT. Universität Paderborn, 2015.

Sundermeier, Jannik. Implementierung Eines Selbststabilisierenden Verteilten Stacks. Universität Paderborn, 2015.

Knollmann, Till. Implementierung Einer Selbststabilisierenden Datenstruktur Für Das Längste Gemeinsame Präfix. Universität Paderborn, 2015.

Kröger, S., and Dorothee M. Meister. “Kinder, Kommerzialisierung und (Online-)Werbung. Rück- und Ausblicke auf ein brisantes Forschungsfeld.” Entgrenztes Heranwachsen, edited by U. Becker et al., Springer, 2015, pp. 201–16.

Gross, D., et al. Medienpädagogik - ein Überblick. Beltz Juventa, 2015.

von Gross, D., et al., editors. Die Geschichte der Medienpädagogik in Deutschland. Beltz Juventa, 2015.

Aßmann, S., et al., editors. School’s out? Informelle und formelle Medienbildung. kopaed, 2015.

Kamin, A. M., and Dorothee M. Meister. “Lehren und Lernen mit digitalen Medien in der Erwachsenen- und Weiterbildung.” Die Geschichte der Medienpädagogik, edited by F. von Gross et al., Beltz Juventa, 2015, pp. 156–81.

Friedrichs, H., and Dorothee M. Meister. “Medienerziehung in der Kindertagesstätte.” Medienpädagogik – ein Überblick, edited by F. von Gross et al., Beltz Juventa, 2015.

von Gross, F., et al. “Einleitung.” Die Geschichte der Medienpädagogik, edited by F. von Gross et al., Beltz Juventa, 2015, pp. 7–11.

von Gross, F., et al. “Vorwort.” Medienpädagogik - Ein Überblick, edited by Dorothee M. Meister et al., Beltz Juventa, 2015, pp. 7–13.

Derakhshandeh, Zahra, et al. “Leader Election and Shape Formation with Self-Organizing Programmable Matter.”10.1007/978-3-319-21999-8_8__DNA Computing and Molecular Programming - 21st International Conference, DNA 21, Boston and Cambridge, MA, USA, August 17-21, 2015. Proceedings, vol. 9211, 2015, pp. 117--132, doi:10.1007/978-3-319-21999-8_8.

Derakhshandeh, Zahra, et al. “An Algorithmic Framework for Shape Formation Problems in Self-Organizing Particle Systems.”10.1145/2800795.2800829__Proceedings of the Second Annual International Conference on Nanoscale Computing and Communication, NANOCOM’ 15, Boston, MA, USA, September 21-22, 2015, ACM, 2015, pp. 21:1--21:2, doi:10.1145/2800795.2800829.

Derakhshandeh, Zahra, et al. “Brief Announcement: On the Feasibility of Leader Election and Shape Formation with Self-Organizing Programmable Matter.”10.1145/2767386.2767451__Proceedings of the 2015 ACM Symposium on Principles of Distributed Computing, PODC 2015, Donostia-San Sebasti\rquote an, Spain, July 21 - 23, 2015, ACM, 2015, pp. 67--69, doi:10.1145/2767386.2767451.

Koutsopoulos, Andreas, et al. “Brief Announcement: Towards a Universal Approach for the Finite Departure Problem in Overlay Networks.”10.1145/2755573.2755614__Proceedings of the 27th ACM on Symposium on Parallelism in Algorithms and Architectures, SPAA 2015, Portland, OR, USA, June 13-15, 2015, ACM, 2015, pp. 77--79, doi:10.1145/2755573.2755614.

Scheideler, Christian, editor. Structural Information and Communication Complexity - 22nd International Colloquium, SIROCCO 2015, Montserrat, Spain, July 14-16, 2015, Post-Proceedings. 2015, doi:10.1007/978-3-319-25258-2.

Reschetnik, W., et al. “Einsatz Additiver Fertigung Zur Optimierung Des Ermüdungsverhaltens von Gekerbten Strukturen.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.

Klemp, E. “Industrial Applications in AM - Aerospace and Overhaul.” ASME AM3D Conference and Expo, 2015.

Klemp, E. “Paradigmenwechsel Mit Additiven Fertigungsverfahren - Möglichkeiten Und Chancen.” Generatives Fertigen Und 3D-Drucken: Industrielle Revolution Oder Hype? Wissenschaftliches Kolloquium, 2015.

Klemp, E. “Möglichkeiten, Chancen Und Mythen Additiver Fertigung.” Hanse-Aerospace-Themennachmittag Im Hause SLM, 2015.

Klemp, E. “Additive Manufacturing - Potenziale, Zukunftschancen Und Hürden.” Messe Interzum, 2015.

Klemp, E. “Technology Update 2015 for Metals.” SLM-Usermeeting, 2015.

Klemp, E. “AM-Verfahren - Möglichkeiten in Der Industriellen Fertigung.” VDMA - Symposium Auf Der Hannover Messe Industrie, 2015.

Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.

Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.

Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.

Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.”http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.

Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.”10.1007/978-3-662-48473-9_5__Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.

dell’Aere, Guido, and Detmar Zimmer. “On Design for Additive Manufacturing - Evaluating Geometrical Limitations.”10.1108/RPJ-06-2013-0060__Rapid Prototyping Journal, vol. 21, no. 6, Emerald Group Publishing Limited, 2015, pp. 662–70, doi:10.1108/RPJ-06-2013-0060.

Lieneke, Tobias, et al. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Proceedings of the Rapid Tech 2015, 2015.

Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.”https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions__26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.

Adam, Guido. Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling. Shaker Verlag, 2015.

Adam, Guido. “On Tolerances for Additive Manufacturing.” Inside 3D Printing Conference and Expo, 2015.

Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Rapid Tech 2015, 2015.

Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for Additive Manufacturing .” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015.

Hölscher, Christian, et al. “Intelligente Betriebsstrategien Für Mehrmotorenantriebssysteme.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe , vol. 67, no. 1–2, Springer-VDI-Verlag , 2015, pp. 55–66.

Wiehe, Ansgar. Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer Bremsen. Der Andere Verlag, 2015.

Zimmer, Detmar, et al. Wellendichtsysteme. 2015.

Teschome, Bezu, et al. “Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing.”10.1021/acs.langmuir.5b02569__Langmuir, vol. 31, 2015, pp. 12823–29, doi:10.1021/acs.langmuir.5b02569.

Giner, Ignacio, et al. “Fundamental Understanding of the Corrosion and Biomineralization of MgO Surfaces – An in Situ AFM Study.”10.1016/j.corsci.2015.08.024__Corrosion Science, vol. 100, 2015, pp. 496–503, doi:10.1016/j.corsci.2015.08.024.

Wittenbrink, Isabel, et al. “Low-Aspect Ratio Nanopatterns on Bioinert Alumina Influence the Response and Morphology of Osteoblast-like Cells.”10.1016/j.biomaterials.2015.05.026__Biomaterials, vol. 62, 2015, pp. 58–65, doi:10.1016/j.biomaterials.2015.05.026.

Mayer, Michael, et al. “On the Way to Identify Microorganisms in Drinking Water Distribution Networks via DNA Analysis of the Gut Content of Freshwater Isopods.”10.1016/j.jbiotec.2014.12.022__Journal of Biotechnology, vol. 201, 2015, pp. 54–59, doi:10.1016/j.jbiotec.2014.12.022.

Becker, Matthias, et al. “Systematically Deriving Quality Metrics for Cloud Computing Systems.”10.1145/2668930.2688043__Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE), vol. 15, ACM, 2015, pp. 169–74, doi:10.1145/2668930.2688043.

Fahr, Rene, and Behnud Mir Djawadi. “‘and They Are Really Lying’: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment.”10.1016/j.joep.2015.03.002__Journal of Economic Psychology, Elsevier, 2015, pp. 48–59, doi:10.1016/j.joep.2015.03.002.

Rai, Ashish K., et al. “Spatially Indirect Transitions in Electric Field Tunable Quantum Dot Diodes.”10.1002/pssb.201552591__Physica Status Solidi (B), 2015, pp. 437–41, doi:10.1002/pssb.201552591.

Bandorf, R., et al. “Direct Metallization of PMMA with Aluminum Films Using HIPIMS.”10.1016/j.surfcoat.2015.10.070__Surface and Coatings Technology, 2015, pp. 77–81, doi:10.1016/j.surfcoat.2015.10.070.

Westermann, Thorsten, et al. “Interdisciplinary System Architecture for Intelligent Technical Systems.” Proceedings of the ASME 2015 International Mechanical Engineering Congress &; Exposition (IME), 2015.

Tschirner, Christian, et al. “Applying Model-Based Systems Engineering for Product Engineering Management - Concepts for Industrial Application.” 1st International Symposium on Systems Engineering (IEEE ISSE), Rome, Italy, 28. - 30. Sep. 2015, 2015.

Rabe, Martin, et al. “Potential of Using Model-Based Systems Engineering to Improve the Development Process of Engineering-to-Order Products in the Field of Machinery and Plant Engineering.” 4th International Conference on Advances in Mechanical Engineering, 16. - 27. Aug. 2015, 2015.

Roßmann, Jürgen, et al. “Architecture for Integrated Development of Complex Systems With Model-Based System Specification and Simulation.” ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, USA, 2. - 5. Aug. 2015, 2015.

Westermann, Thorsten, et al. “Improving Order Fulfillment Processes with MBSE.” 20th International Conference on Engineering and Design (ICE), Milan, Italy, 27. - 30. Jul. 2015, 2015.

Bremer, Christian, et al. “Konzept für das ganzheitliche Testen komplexer mechatronischer Systeme.” Digitales Engineering zum Planen, Testen und Betreiben Technischer Systeme. IFF Wissenschaftstage, Magdeburg, 24. - 25. Jun. 2015, 2015.

Tschirner, Christian, et al. “Tailoring Model-Based Systems Engineering - Concepts for Industrial Application.” IEEE Systems Conference (SysCon) , Vancouver, 13. - 16. Apr. 2015, 2015.

Czaja, Anja Maria, and Roman Dumitrescu. “Guideline for a Target-Oriented Systems Engineering Process in Small and Medium Sized Enterprises.” 4th International Conference on Advances in Mechanical Engineering, German-Malaysian Workshop Series 2015, Systems Engineering for Advanced Mechatronics, Bali, Indonesia, 2015, ICAME, 2015.

Dumitrescu, Roman, et al. “Model-Based Development of Products, Processes and Production Resources - A State Oriented Approach for an Integrated System Model of Objects, Processes and Systems.”  At-Automatisierungstechnik 63 (10), no. 10, 2015, pp. 844–57.

Schulz, Hannah. Zur Verbreitung von Informationen in sozialen Netzwerken - eine wirtschaftspolitische Analyse. Universität Paderborn, 2015.

Roßmann, Jürgen, et al. “Integrierte Entwicklung komplexer Systeme mit modellbasierter Systemspezifikation und -simulation.” Wissenschaftsforum Intelligente Technische Systeme (WinTeSys), 2015.

Kliewe, Daniel, et al. “Approach for Identifying Components Worthy of Protection of Cyber-Physical Systems (CPS) Based on a System Model.” Jurnal Teknologi, vol. 76 (4), no. 4, 2015, pp. 7–11.

Bansmann, Michael, et al. “Implementing Model-Based Systems Engineering Based on Shared Services - Concepts for Industrial Application.” 1st IEEE International Symposium on Systems Engineering (ISSE), Rome, Italy, 2015, 2015.

John, Thomas, and Dennis Kundisch. “Why Fit Leads to Surprise: An Extension of Cognitive Fit Theory to Creative Problems.” Proceedings of the 36th International Conference on Information Systems (ICIS), Fort Worth, USA, 2015.

Abrishamchian, Farisoroosh, et al. “Feature Model Approach For Managing Variability of Dynamic Behavior Models in Mechatronic Systems.” Proceedings of the ASME 2015 International Mechanical Engineering Congress &; Exposition, ASME, 2015.

Bertelsmeier, Fabian, and Ansgar Trächtler. “Decentralized Controller Reconû01guration Strategies for Hybrid System Dynamics Based on Product-Intelligence.” 20th IEEE International Conference on Emerging Technologies and Factory Automation, 2015.

Abdelgawad, Kareem, et al. “Flexible Operation Workflow of a Driving Simulation Center for ADAS Development.” New Developments in Driving Simulation Design and Experiments, Driving Simulation Conference, 2015.

Hassan, Bassem, et al. “ARTiST - An Augmented Reality Testbed for Intelligent Technical Systems.” Virtual, Augmented and Mixed Reality VAMR 2015 Held as Part of HCI International 2015, edited by Randall Shumaker and Stephanie Lackey, Springer International Publishing Switzerland, 2015, pp. 457–69.

Berssenbrügge, Jan, et al. “Visualization of Headlight Illumination for the Virtual Prototyping of Light-Based Driver Assistance Systems.” Proceedings of the ASME 2015 International Design Engineering Technical Conferences &; Computers and Information in Engineering Conference, 2015.

Krüger, Martin, and Ansgar Trächtler. “Parametrische Modellordnungsreduktion Für Hierarchische Selbstoptimierende Systeme.” At-Automatisierungstechnik, vol. 63, no. 8, 2015, pp. 633–45.

Bertelsmeier, Fabian, et al. “Produkt- Und Lastabhängiges Dezentrales Motormanagement Für Die Fördertechnik: Anforderungen, Design Und Applikation .” Automation 2015, VDI-Verlag, 2015.

Pai, Arathi, et al. “Modelling the Constitutive Behaviour of Martensite and Austenite in Shape Memory Alloys Using Closed-Form Analytical Continuous Equations.” 7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART, 2015.

Damerow, Ulf-Hendrik, et al. “Intelligente Biegeverfahren.” Wt Werkstattstechnik Online, vol. 6–2015, 2015, pp. 427–32.

Abdelgawad, Kareem, et al. “A Modular Architecture of an Interactive Simulation and Training Environment for Advanced Driver Assistance Systems.” International Journal On Advances in Software, vol. 8, IARIA, 2015, pp. 247–61.

Shareef, Zeeshan, et al. “Design and Control of Cooperative Ball Juggling Delta Robots without Visual Guidance.” Robotica, 2015, pp. 1–17.

Shareef, Zeeshan. Path Planning and Trajectory Optimization of Delta Parallel Robot. Vol. 345, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015.

Jähn, Claudius, et al. “Automatische Ableitung Geometrischer Eigenschaften von Bauteilen Aus Dem 3-D-Polygonmodell.” 12. Paderborner Workshop Augmented &; Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 107–20.

Berssenbrügge, Jan, et al. “Visualisierung von Scheinwerfersystemen Für Das Virtual Prototyping von Lichtbasierten Fahrerassistenzsystemen.” 12. Paderborner Workshop Augmented &; Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 231–45.

Berssenbrügge, Jan, et al. “Anbindung Des Virtuellen Prototypen an Die Partialmodelle Intelligenter Technischer Systeme.” 12. Paderborner Workshop Augmented &; Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 65–78.

Zimmermann, Daniel, et al. “Entwicklung Eines Prädiktiven Motion-Cueing-Verfahrens Für Den ATMOS-Fahrsimulator .” 12. Paderborner Workshop Augmented &; Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 261–72.

Bertelsmeier, Fabian, et al. “Online-Rekonû01guration Hybrider Regelkreise in Abhängigkeit Variierender Produkteigenschaften.” Tagungsband Mechatronik 2015, VDI Mechatronik, 2015, pp. 97–102.

Lochbichler, Matthias, et al. “Systematische Wahl Der Modellierungstiefe Im Entwurfsprozess Mechatronischer Systeme Am Beispiel Eines Geldautomaten.” Tagungsband Mechatronik, VDI Mechatronik, 2015.

Koke, Isabel, et al. “Tutorenprogramm Und Vertiefungsberatung Stellen Weichen in Entscheidenden Phasen Des Student Life-Cycles in Maschinenbaustudiengängen.”  44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015.

Michael, Jan, et al. “Modellbasierte Mehrzieloptimierung Zur Integration von Hausgeräten in SmartGrids.” VDI Mechatronik 2015 Tagungsband, VDI Mechatronik, 2015, pp. 245–50.

Wuthishuwong, Chairit, et al. “Safe Trajectory Planning for Autonomous Intersection Management by Using Vehicle to Infrastructure Communication.” EURASIP Journal on Wireless Communications and Networking, vol. 33, no. 1, 2015.

Lankeit, Christopher, et al. “Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach.” Jurnal Teknologi, vol. 76, no. 4, 2015.

Lankeit, Christopher, et al. “From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System.” Proceedings, IEEE, 2015.

Pai, Arathi, et al. “Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics.” IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON, 2015.

Geierhos, Michaela, et al. “What Did You Mean? Facing the Challenges of User-Generated Software Requirements.”10.5220/0005346002770283__Proceedings of the 7th International Conference on Agents and Artificial Intelligence (ICAART), Special Session on Partiality, Underspecification, and Natural Language Processing (PUaNLP 2015), edited by Stephane10.5220/0005346002770283__Loiseau et al., SciTePress - Science and Technology Publications, 2015, pp. 277–83, doi:10.5220/0005346002770283.