Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling
T. Lieneke, V. Denzer, G. Adam, D. Zimmer, in: CAT 2016, 2016, pp. 286–291.
LibreCat: /record/22412
DOI: 10.1016/j.procir.2016.02.361

Effizienzorientierte Optimierung der Baustruktur von MMDS-Sammelgetrieben
U. Brückner, M. Strop, D. Zimmer, Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen  55 (2016) 106–113.
LibreCat: /record/22414

Intelligent Operating Strategy for an Internal Rubber Mixer's Multi-Motor Drive System Based on Artificial Neural Network
M. Strop, D. Zimmer, in: IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA), Institute of Electrical and Electronics Engineers (IEEE) , 2016, pp. 1–9.
LibreCat: /record/22415
DOI: 10.1109/ETFA.2016.7733724

Örtlich konzentrierte Mehrmotorenantriebssysteme - Ein Lösungsansatz für ganzheitlich modulare Antriebssysteme
U. Brückner, M. Strop, D. Zimmer, Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen  55 (2016) 84–89.
LibreCat: /record/22416

Optimierung von Planetengetriebemotoren - Einfluss des Übersetzungsverhältnisses auf das Kosten-, Gewichts-, Verlust-, Dynamik- und Zuverlässigkeitsverhalten von Planetengetriebemotoren
A.K. Kücükyavuz, Optimierung von Planetengetriebemotoren - Einfluss Des Übersetzungsverhältnisses Auf Das Kosten-, Gewichts-, Verlust-, Dynamik- Und Zuverlässigkeitsverhalten von Planetengetriebemotoren, Der Andere Verlag, 2016.
LibreCat: /record/22417

Beitrag zur Reduzierung der Verluste von fluidabdichtenden Wellendichtsystemen
K. Nolte, Beitrag Zur Reduzierung Der Verluste von Fluidabdichtenden Wellendichtsystemen, Der Andere Verlag, 2016.
LibreCat: /record/22418

Verbundprojekt Energieeffiziente Federkraftbremse: Abschlussbericht. Berichtszeitraum: 01.05.2012 - 31.03.2016
M.H. Schadomsky, D. Zimmer, N.-P. Kriegel, C. Neumann, W. Küter, E. Menzel, Verbundprojekt Energieeffiziente Federkraftbremse: Abschlussbericht. Berichtszeitraum: 01.05.2012 - 31.03.2016, 2016.
LibreCat: /record/22492
DOI: 10.2314/GBV:876363400

A Holistic and Adaptive Approach for Automated Prototyping of Image Processing Functionality
A. Jungmann, B. Kleinjohann, in: Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2016, pp. 1--8.
LibreCat: /record/225
DOI: 10.1109/ETFA.2016.7733522

Do talented women shy away from competition?
B. Hoyer, T. van Huizen, L. Keijzer, T. Rezai Khavas, S. Rosenkranz, Do Talented Women Shy Away from Competition?, 2016.
LibreCat: /record/2252

A Formal Approach to Error Localization and Correction in Service Compositions
J. Krämer, H. Wehrheim, in: Proceedings of the 1st International Workshop on Formal to Practical Software Verification and Composition (VeryComp 2016), 2016, pp. 445--457.
LibreCat: /record/226
DOI: 10.1007/978-3-319-50230-4_35

Self-Assembly, Dynamics, and Polymorphism of hIAPP(20–29) Aggregates at Solid–Liquid Interfaces
R. Hajiraissi, I. Giner, G. Grundmeier, A. Keller, Langmuir 33 (2016) 372–381.
LibreCat: /record/22671
DOI: 10.1021/acs.langmuir.6b03288

Regular Nanoscale Protein Patterns via Directed Adsorption through Self-Assembled DNA Origami Masks
S. Ramakrishnan, S. Subramaniam, A.F. Stewart, G. Grundmeier, A. Keller, ACS Applied Materials &; Interfaces 8 (2016) 31239–31247.
LibreCat: /record/22672
DOI: 10.1021/acsami.6b10535

Temperature-Dependent Charge Transport through Individually Contacted DNA Origami-Based Au Nanowires.
B. Teschome, S. Facsko, T. Schönherr, J. Kerbusch, A. Keller, A. Erbe, Langmuir 32 (2016) 10159–10165.
LibreCat: /record/22673
DOI: 10.1021/acs.langmuir.6b01961
PMID: 27626925

DNA annealing by Red;2 is insufficient for homologous recombination and the additional requirements involve intra- and inter-molecular interactions.
S. Subramaniam, A. Erler, J. Fu, A. Kranz, J. Tang, M. Gopalswamy, S. Ramakrishnan, A. Keller, G. Grundmeier, D. Müller, M. Sattler, A. Stewart, Scientific Reports 6 (2016) 34525.
LibreCat: /record/22674
DOI: 10.1038/srep34525
PMID: 27708411

Plasma-Enhanced Chemical Vapor Deposition (PE-CVD) yields better Hydrolytical Stability of Biocompatible SiOx Thin Films on Implant Alumina Ceramics compared to Rapid Thermal Evaporation Physical Vapor Deposition (PVD)
F. Böke, I. Giner, A. Keller, G. Grundmeier, H. Fischer, ACS Applied Materials &; Interfaces 8 (2016) 17805–17816.
LibreCat: /record/22675
DOI: 10.1021/acsami.6b04421

Anisotropic metal growth on phospholipid nanodiscs via lipid bilayer expansion
J. Oertel, A. Keller, J. Prinz, B. Schreiber, R. Hübner, J. Kerbusch, I. Bald, K. Fahmy, Scientific Reports 6 (2016) 26718.
LibreCat: /record/22676
DOI: 10.1038/srep26718

Structural stability of DNA origami nanostructures in the presence of chaotropic agents
S. Ramakrishnan, G. Krainer, G. Grundmeier, M. Schlierf, A. Keller, Nanoscale 8 (2016) 10398–10405.
LibreCat: /record/22677
DOI: 10.1039/c6nr00835f

Adsorption and adhesion studies of PdSn-nanoparticles on protonated amine and carboxylic acid-terminated surfaces
B. Mosebach, F.M. Bayer, C.-C. Fels, M. Voigt, B. Oezkaya, A. Pomorska, B. Torun, A. Keller, G. Grundmeier, Surface and Interface Analysis 48 (2016) 1017–1025.
LibreCat: /record/22678
DOI: 10.1002/sia.6016

A CEGAR Scheme for Information Flow Analysis
M. Töws, H. Wehrheim, in: Proceedings of the 18th International Conference on Formal Engineering Methods (ICFEM 2016), 2016, pp. 466--483.
LibreCat: /record/227
DOI: 10.1007/978-3-319-47846-3_29

Die Rolle der Reputation: Die Entstehung, der Aufbau, die Messung und die Auswirkung der Reputation auf Kunden und Unternehmen
A. Hesso, Die Rolle der Reputation: Die Entstehung, der Aufbau, die Messung und die Auswirkung der Reputation auf Kunden und Unternehmen, Universität Paderborn, 2016.
LibreCat: /record/2271

Scanning Kelvin Probe Blister test measurements of adhesive delamination – Bridging the gap between experiment and theory
R. Grothe, C.-N. Liu, M. Baumert, O. Hesebeck, G. Grundmeier, International Journal of Adhesion and Adhesives (2016) 8–15.
LibreCat: /record/22850
DOI: 10.1016/j.ijadhadh.2016.11.006

Influence of O2 exposure on the interaction between C and amorphous AlY
O. Hunold, M. Wiesing, T. de los Arcos, D. Music, G. Grundmeier, J.M. Schneider, Applied Surface Science (2016) 1165–1172.
LibreCat: /record/22851
DOI: 10.1016/j.apsusc.2016.09.092

In situPM-IRRAS studies of organothiols and organosilane monolayers-ZnO interfaces at high water activities
B. Torun, I. Giner, G. Grundmeier, O. Ozcan, Surface and Interface Analysis (2016) 71–74.
LibreCat: /record/22852
DOI: 10.1002/sia.6058

Influence of stripping and cooling atmospheres on surface properties and corrosion of zinc galvanizing coatings
K.A. Yasakau, I. Giner, C. Vree, O. Ozcan, R. Grothe, A. Oliveira, G. Grundmeier, M.G.S. Ferreira, M.L. Zheludkevich, Applied Surface Science (2016) 144–156.
LibreCat: /record/22853
DOI: 10.1016/j.apsusc.2016.07.093

Effect of Pre-Rolling Heat Treatments on the Bond Strength of Cladded Galvanized Steels in a Cold Roll Bonding Process
I. Hordych, D. Rodman, F. Nürnberger, C. Hoppe, H.C. Schmidt, G. Grundmeier, W. Homberg, H.J. Maier, Steel Research International (2016) 1619–1626.
LibreCat: /record/22854
DOI: 10.1002/srin.201600021

Ageing mechanisms of polyurethane adhesive/steel interfaces
J. Weiss, M. Voigt, C. Kunze, J.E.H. Sánchez, W. Possart, G. Grundmeier, International Journal of Adhesion and Adhesives (2016) 167–175.
LibreCat: /record/22855
DOI: 10.1016/j.ijadhadh.2016.06.009

Adhesion and corrosive delamination of epoxy films on chemically etched ZnMgAl-alloy coatings
K. Pohl, O. Ozcan, M. Voigt, G. Grundmeier, Materials and Corrosion (2016) 1020–1026.
LibreCat: /record/22856
DOI: 10.1002/maco.201608968

Cold pressure welding by incremental rolling: Deformation zone analysis
H.C. Schmidt, W. Homberg, C. Hoppe, G. Grundmeier, I. Hordych, H.J. Maier, in: 2016.
LibreCat: /record/22858
DOI: 10.1063/1.4963507

Einsatz- und Nutzenpotentiale von Augmented Reality im Kontext von Industrie 4.0
D. Röltgen, H. Anacker, R. Dumitrescu, in: VDE Kongress 2016 Internet of Things, Mannheim, Deutschland, 7. - 8. Nov. 2016, 2016.
LibreCat: /record/22870

 Einsatz von Leuchten zur Standortbestimmung in der Produktion
T. Falkowski, C. Fechtelpeter, C. Peitz, A. Kühn, R. Dumitrescu, in: VDE Kongress 2016, 7. - 8. Nov. 2016, 2016.
LibreCat: /record/22871

Reference Architecture and Maturity Levels for Cyber-Physical Systems
M. Westermann, H. Anacker, R. Dumitrescu, A.M. Czaja, in: 2nd IEEE International Symposium on Systems Engineering 2016, Edinburgh, Scotland, 4. - 5. Okt. 2016, 2016.
LibreCat: /record/22872

Reliability in MID - barriers, potentials, fields of action
C. Fechtelpeter, C. Jürgenhake, R. Dumitrescu, T. Mager, K.-P. Fritz, T. Grötzinger, H. Müller, P. Wild, A. Zimmermann, in: 12th International Congress on Molded Interconnect Devices, Conference Proceedings , 28. - 30. Sep. 2016, 2016.
LibreCat: /record/22873

Classification of MID-prototypes
C. Jürgenhake, T. Falkowski, R. Dumitrescu, in: 12th International Congress on Molded Interconnect Devices, Würzburg, 28. - 30. Sep. 2016, 2016.
LibreCat: /record/22874

Value Network Design for Innovations: Developing Alternative Value Network Drafts
M. Kage, M. Drewel, J. Gausemeier, M. Schneider, Technology Innovation Management Review 6 (7) (2016) 21–33.
LibreCat: /record/22875

Systematic for function-oriented development of spatial integrated circuit carriers
C. Jürgenhake, R. Dumitrescu, in: International Design Conference - Design 2016, 16. - 19. Mai 2016, 2016.
LibreCat: /record/22876

Value Network Design for Innovations
M. Kage, M. Drewel, J. Gausemeier, M. Schneider, in: Proceedings of the 5th ISPIM Innovation Forum, 2016.
LibreCat: /record/22877

Exhaustiveness of Systems Structures in Model-Based Systems Engineering for Mechatronic Systems
L. Kaiser, C. Bremer, R. Dumitrescu, in: Sysint - 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2016.
LibreCat: /record/22878

 Function-based feasibility study and benchmark for MID concepts
C. Jürgenhake, T. Falkowski, C. Fechtelpeter, R. Dumitrescu, in: Sysint - 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2016.
LibreCat: /record/22879

 A concept for managing information in early stages of product engineering by integrating MBSE and workflow management systems
L.H. Bretz, C. Tschirner, R. Dumitrescu, in: IEEE ISSE: Proceedings of 2016 International Symposium on Systems Engineering, Edinburgh, Scotland, 2016, pp. 143–150.
LibreCat: /record/22880

Additive Fertigung
J. Gausemeier, M. Schmidt, R. Anderl, H.-J. Schmid, C. Leyens, G. Seliger, M. Karg, M. Kage, Additive Fertigung, acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.
LibreCat: /record/23024

Indirect Force Control in Hardware-in-the-Loop Simulations for a Vehicle Axle Test Rig
S. Olma, A. Kohlstedt, P. Traphöner, K.-P. Jäker, A. Trächtler, in: 14th International Conference on Control, Automation Robotics &; Vision (ICARCV), IEEE, Phuket, Thailand, 2016.
LibreCat: /record/23025

Feature Model Based Interface Design for Development of Mechatronic Systems
F. Abrishamchian, A. Trächtler, eds., Feature Model Based Interface Design for Development of Mechatronic Systems, IEEE, 2016.
LibreCat: /record/23026

PROFINET-Implementierung im Rahmen der Entwicklung eines intelligenten, selbstlernenden Teigkneters
J. Holtkötter, J. Michael, C. Henke, A. Trächtler, F. Oestersötebier, S. Wessels, in: Virtuelle Instrumente in Der Praxis 2016, VDE Verlag, 2016.
LibreCat: /record/23027

A HRRN based scheduling for FMS and RMS with networked control and product-intelligence
F. Bertelsmeier, J. Pollmann, A. Trächtler, in: Inproceedings of the IEEE IECON 2016, IEEE, Florence, Italy, 2016.
LibreCat: /record/23028

Model Predictive Feedforward Compensation for Control of Multi Axes Hybrid Kinematics on PLC
A.T. Rüting, L.M. Blumenthal, A. Trächtler, in: Proceedings of IEEE IECON 2016, IEEE, Florence, Italy, 2016.
LibreCat: /record/23029

Nichtlineare Zustandsregelung mit Sliding-Mode-Beobachter für einen Achsprüfstand mit hydraulischem Hexapoden
S. Olma, P. Traphöner, A. Kohlstedt, A. Trächtler, in: GMA Fachausschuss 1.40 “Theoretische Verfahren Der Regelungstechnik,” VDI/VDE-GMA, Anif/Salzburg, Austria, 2016.
LibreCat: /record/23030

Substructuring and Control Strategies for Hardware-in-the-Loop Simulations of Multiaxial Suspension Test Rigs
S. Olma, A. Kohlstedt, P. Traphöner, K.-P. Jäker, A. Trächtler, in: Proceedings of the 7th IFAC Symposium on Mechatronic Systems, IFAC, Loughborough, UK, 2016.
LibreCat: /record/23031

Study of a rail-bound parallel robot concept with curvilinear closed-path tracks
D. Bielawny, P. Wang, A. Trächtler, in: Proceedings of 7th IFAC Symposium on Mechatronic Systems &; 15th Mechatronics Forum International Conference, 2016.
LibreCat: /record/23032

Multiobjective Model Predictive Control of an Industrial Laundry
S. Peitz, M. Graeler, C. Henke, M. Hessel-von Molo, M. Dellnitz, A. Trächtler, 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering Procedia Technology 26 (2016) 483 – 490.
LibreCat: /record/23033

Design and Implementation of Intelligent Control Software for a Dough Kneader
F. Oestersötebier, P. Traphöner, F. Reinhart, S. Wessels, A. Trächtler, in: Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, Paderborn, 2016.
LibreCat: /record/23034

Approach for an Integrated Model-Based System Design of Intelligent Dynamic Systems Using Solution and System Knowledge
F. Oestersötebier, F. Abrishamchian, C. Lankeit, V. Just, A. Trächtler, in: Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, Paderborn, 2016.
LibreCat: /record/23036

Model-based method for the accuracy analysis of Hardware-in-the-Loop test rigs for mechatronic vehicle axles
S. Olma, P. Traphöner, A. Kohlstedt, K.-P. Jäker, A. Trächtler, in: Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, Paderborn, Germany, 2016.
LibreCat: /record/23037

Disturbance Observer Design for Utilizing of Time-delayed Vision Measurements in High Dynamic Systems
S. Wang, V. Just, A. Trächtler, in: Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, Paderborn, 2016.
LibreCat: /record/23039

Development and design of intelligent product carriers for û02exible networked control of distributed manufacturing processes
F. Bertelsmeier, S. Schöne, A. Trächtler, in: Inproceedings of the IEEE 24th Mediterranean Confernce on Control and Automation (MED), IEEE, Athens, Greece, 2016.
LibreCat: /record/23040

Control of a hydraulic hexapod for a Hardware-in-the-Loop axle test rig
A. Kohlstedt, S. Olma, S. Flottmeier, P. Traphöner, K.-P. Jäker, A. Trächtler, At-Automatisierungstechnik 64 (2016) 365–374.
LibreCat: /record/23041

Consistency Analysis for Requirements, Functions, and System Elements
C. Lankeit, V. Just, A. Trächtler, in: IEEE Systems Conference, Orlando, USA, 2016.
LibreCat: /record/23042

Product Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing and Intralogistic Processes
V. Geneiß, C. Hedayat, F. Bertelsmeier, C. Henke, K.-E. Vathauer, T. Geßner, in: Inproceedings of Smart Systems Integration 2016 International Conference and Exhibition on Integration of Materials, Devices and Systems, 2016.
LibreCat: /record/23043

Modellbildung und Simulation im Kontext des Systems Engineering
J. Michael, J. Holtkötter, C. Henke, A. Trächtler, in: ASIM-Treffen STS/GMMS 2016, 2016, pp. 174–179.
LibreCat: /record/23044

Implementing intelligent technical systems into smart homes by using model based systems engineering and multi-agent systems
J. Michael, M. Hillebrand, B. Wohlers, C. Henke, R. Dumitrescu, A. Trächtler, Renewable Energy and Power Quality Journal (RE&;PQJ) 16 1 (2016) 359–364.
LibreCat: /record/23045

Precision Control of SMA Actuators with a Real Time Model-Based Controller and Extended VSC
A. Pai, M. Riepold, A. Trächtler, IFAC-PapersOnLine 49 (2016) 66–73.
LibreCat: /record/23046

Regelungstechnik 
O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, A. Trächtler, Regelungstechnik , VDE-Verlag, 2016.
LibreCat: /record/23048

A model extended temperature and strain controller modulated with PWM for precision position control of shape memory alloy actuators
A. Pai, M. Riepold, A. Trächtler, in: IEEE International Conference on Advanced Intelligent Mechatronics AIM, 2016.
LibreCat: /record/23049

Multidomänenmodell zur Optimierung der Hydraulik eines Raupenlaufwerks für Landmaschinen
D. Kruse, A.P. Warkentin, M. Krüger, A. Trächtler, S. Rackow, in: Proc. 4. Internationales Commercial Vehicle Technology Symposium, 2016.
LibreCat: /record/23050

Consensus-based local information coordination for the networked control of the autonomous intersection management
C. Wuthishuwong, A. Trächtler, Complex &; Intelligent Systems doi:10.1007/747-016-0032-6 (2016) 1–16.
LibreCat: /record/23051

Simultaneous path planning and trajectory optimization for robotic manipulators using discrete mechanics and optimal control
Z. Shareef, A. Trächtler, Robotica 34 (2016) 1322–1334.
LibreCat: /record/23052

Verbesserte Schätzung von Fahrdynamikgrößen durch Modellierung der Fahrwerks-und Lenkkinematik
J. Renninger, A. Trächtler, At-Automatisierungstechnik 64 (2016) 346–354.
LibreCat: /record/23053

A Tool Chain for Model-Based Development of Heat Pump Dryers
M. Bockholt, M. Katter, G. Pohl, J. Michael, T. Alpögger, in: 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2016.
LibreCat: /record/23054

Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM
G. Deppe, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 81–92.
LibreCat: /record/21687
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf

Product optimization with and for Additive Manufacturing
T. Reiher, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2236–2249.
LibreCat: /record/21688
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf

Cost Efficient Design and Planning for Additive Manufacturing Technologies
C. Lindemann, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 93–112.
LibreCat: /record/21689
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf

Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market
C. Lindemann, G. Deppe, R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market, Metropolis Verlag, 2016.
LibreCat: /record/21698

Prevention of Product Piracy - Potentials of Additive Manufacturing
U. Jahnke, R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing, Metropolis Verlag, 2016.
LibreCat: /record/21699

Automatized Derivation of Comprehensive Specifications for Black-box Services
S. Schwichtenberg, in: Proceedings of the 38th International Conference on Software Engineering Companion (ICSE), 2016, pp. 815–818.
LibreCat: /record/217
DOI: 10.1145/2889160.2889271

Combining material efficiency and part reliability by product optimization applying additive manufacturing
T. Reiher, G. Deppe, R. Koch, in: International Conference Production Engineering and Management 2016, 2016, pp. 27–38.
LibreCat: /record/21702
DOI: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf

Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung
G. Deppe, R. Koch, in: Rapid Tech 2016, Hanser Verlag, 2016, pp. 349–360.
LibreCat: /record/21705
DOI: https://doi.org/10.3139/9783446450608.031

Adding atmospheric scattering and transparency to a deferred rendering pipeline for camera based ADAS tests
S. Heppner, M. Dransfeld, G. Domik, in: M. Pinzger, H. Mayr (Eds.), Informatik 2016, Gesellschaft für Informatik e.V., Bonn, 2016, pp. 1591–1604.
LibreCat: /record/21728

A Deferred Rendering Pipeline Including a Global Illumination Model for Atmospheric Scattering and Transparency
S. Heppner, M. Dransfeld, G. Domik, in: M. Hullin, M. Stamminger, T. Weinkauf (Eds.), Vision, Modeling &; Visualization, The Eurographics Association, 2016.
LibreCat: /record/21729
DOI: 10.2312/vmv.20161458

3D Image Display Courses for Information Media Students
K. Yanaka, T. Yamanouchi, IEEE Computer Graphics and Applications 36 (2016) 68–73.
LibreCat: /record/21730
DOI: 10.1109/MCG.2016.36

Using Heuristic Evaluation to Foster Visualization Analysis and Design Skills
B.S. Santos, B.Q. Ferreira, P. Dias, IEEE Computer Graphics and Applications 36 (2016) 86–90.
LibreCat: /record/21731
DOI: 10.1109/MCG.2016.7

Automatic Composition of Service-based Image Processing Applications
A. Jungmann, B. Kleinjohann, in: Proceedings of the 13th IEEE International Conference on Services Computing (SCC), 2016, pp. 106--113.
LibreCat: /record/218
DOI: 10.1109/SCC.2016.21

Architectural Management of On-The-Fly Computing Markets
B. Jazayeri, in: Proceedings of the 10th European Conference on Software Architecture (ECSA Workshops), ACM, Copenhagen, Denmark, 2016, p. 42.
LibreCat: /record/219
DOI: 10.1145/2993412.3010821

Evaluating bilingual education in Germany: CLIL students’ general English proficiency, EFL self-concept and interest
D. Rumlich, Evaluating Bilingual Education in Germany: CLIL Students’ General English Proficiency, EFL Self-Concept and Interest, Lang, Frankfurt am Main, Germany, 2016.
LibreCat: /record/21904

Variational tensor approach for approximating the rare-event kinetics of macromolecular systems
F. Nüske, R. Schneider, F. Vitalini, F. Noé, The Journal of Chemical Physics (2016).
LibreCat: /record/21937
DOI: 10.1063/1.4940774

Data Management for additive manufacturing: survey on requirements and current state
I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, T. Reiher, in: 14th International DESIGN Conference 2016, 2016.
LibreCat: /record/21997
DOI: https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE

Application Deployment at Distributed Clouds
M. Keller, Application Deployment at Distributed Clouds, Universität Paderborn, 2016.
LibreCat: /record/220

Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.
LibreCat: /record/22019
DOI: 10.1007/s11837-016-2197-2

Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme
E. Moritzer, A. Hirsch, K. Günther, S. Teutoburg-Weiss, A.F. Lasagni, U. Klotzbach, F. Sonntag, 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ 6 (2016) 65–70.
LibreCat: /record/22025

Chemical Surface Treatment of Ultem 9085 Parts
M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, Carl Hanser Verlag GmbH &; Co. KG, 2016, pp. 121–133.
LibreCat: /record/22039
DOI: 10.3139/9783446450608.010

The Importance of OER in European Education
M. Beutner, J. Schneider, in: M. Beutner (Ed.), OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, Köln, 2016, pp. 11–17.
LibreCat: /record/9251

The EU-StORe Project
M. Beutner, J. Schneider, in: M. Beutner (Ed.), OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, Köln, 2016, pp. 19–27.
LibreCat: /record/9252

The OER Quality Standards
M. Beutner, J. Schneider, in: M. Beutner (Ed.), OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, Köln, 2016, pp. 29–41.
LibreCat: /record/9253

Insights in the OER Rating – Database – Structures, Advantages and Challanges
M. Beutner, C. Duse, R. Pechuel, J. Schneider, in: M. Beutner (Ed.), OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, Köln, 2016, pp. 43–50.
LibreCat: /record/9254

Use and Implementation of OERs in Germany
M. Beutner, J. Schneider, in: M. Beutner (Ed.), OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, Köln, 2016, pp. 53–61.
LibreCat: /record/9255

Evaluation Results concerning OER and the EU-StORe Project
M. Beutner, J. Schneider, in: M. Beutner (Ed.), OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, Köln, 2016, pp. 117–133.
LibreCat: /record/9256

OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project
M. Beutner, ed., OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, IK Verlag, Köln, 2016.
LibreCat: /record/9257

Innovative Ansätze zum Serious Mobile Learning für Aus- und Weiterbildung
M. Beutner, ed., Innovative Ansätze zum Serious Mobile Learning für Aus- und Weiterbildung, IK Verlag, Köln, 2016.
LibreCat: /record/9258

Sounds and Audios in E-learning scenarios. Results and Discussions on the basis of the SEEL project
M. Beutner, ed., Sounds and Audios in E-Learning Scenarios. Results and Discussions on the Basis of the SEEL Project, IK Verlag, Köln, 2016.
LibreCat: /record/9259

Innovatives Micro-Learning im Handwerk – Konzeption auf Basis der Struktur der OPALESCE Learning Units sowie handwerksbezogene Umsetzungsbeispiele aus dem Bereich Rechnungswesen
M. Beutner, Innovatives Micro-Learning im Handwerk – Konzeption auf Basis der Struktur der OPALESCE Learning Units sowie handwerksbezogene Umsetzungsbeispiele aus dem Bereich Rechnungswesen, IK Verlag, Köln, 2016.
LibreCat: /record/9271

SEEL – Expertenhandbuch. SEEL – Handbook for experts
M. Beutner, J. Schneider, SEEL – Expertenhandbuch. SEEL – Handbook for experts, IK Verlag, Paderborn, 2016.
LibreCat: /record/9273

Optical Transitions between Confined and Unconfined States in p-Type Asymmetric GaAs/InGaAs/AlGaAs QW Structures
P. Sitarek, K. Ryczko, J. Misiewicz, D. Reuter, A. Wieck, Acta Physica Polonica A 120 (2016) 849–851.
LibreCat: /record/7699
DOI: 10.12693/aphyspola.120.849