R. Grothe, C.-N. Liu, M. Baumert, O. Hesebeck, and G. Grundmeier, “Scanning Kelvin Probe Blister test measurements of adhesive delamination – Bridging the gap between experiment and theory,” International Journal of Adhesion and Adhesives, pp. 8–15, 2016.

O. Hunold, M. Wiesing, T. de los Arcos, D. Music, G. Grundmeier, and J. M. Schneider, “Influence of O2 exposure on the interaction between C and amorphous AlY,” Applied Surface Science, pp. 1165–1172, 2016.

B. Torun, I. Giner, G. Grundmeier, and O. Ozcan, “In situPM-IRRAS studies of organothiols and organosilane monolayers-ZnO interfaces at high water activities,” Surface and Interface Analysis, pp. 71–74, 2016.

K. A. Yasakau et al., “Influence of stripping and cooling atmospheres on surface properties and corrosion of zinc galvanizing coatings,” Applied Surface Science, pp. 144–156, 2016.

I. Hordych et al., “Effect of Pre-Rolling Heat Treatments on the Bond Strength of Cladded Galvanized Steels in a Cold Roll Bonding Process,” steel research international, pp. 1619–1626, 2016.

J. Weiss, M. Voigt, C. Kunze, J. E. H. Sánchez, W. Possart, and G. Grundmeier, “Ageing mechanisms of polyurethane adhesive/steel interfaces,” International Journal of Adhesion and Adhesives, pp. 167–175, 2016.

K. Pohl, O. Ozcan, M. Voigt, and G. Grundmeier, “Adhesion and corrosive delamination of epoxy films on chemically etched ZnMgAl-alloy coatings,” Materials and Corrosion, pp. 1020–1026, 2016.

H. C. Schmidt, W. Homberg, C. Hoppe, G. Grundmeier, I. Hordych, and H. J. Maier, “Cold pressure welding by incremental rolling: Deformation zone analysis,” 2016.

D. Röltgen, H. Anacker, and R. Dumitrescu, “Einsatz- und Nutzenpotentiale von Augmented Reality im Kontext von Industrie 4.0,” in VDE Kongress 2016 Internet of Things, Mannheim, Deutschland, 7. - 8. Nov. 2016, 2016.

T. Falkowski, C. Fechtelpeter, C. Peitz, A. Kühn, and R. Dumitrescu, “Einsatz von Leuchten zur Standortbestimmung in der Produktion,” in VDE Kongress 2016, 7. - 8. Nov. 2016, 2016.

M. Westermann, H. Anacker, R. Dumitrescu, and A. M. Czaja, “Reference Architecture and Maturity Levels for Cyber-Physical Systems,” in 2nd IEEE International Symposium on Systems Engineering 2016, Edinburgh, Scotland, 4. - 5. Okt. 2016, 2016.

C. Fechtelpeter et al., “Reliability in MID - barriers, potentials, fields of action,” in 12th International Congress on Molded Interconnect Devices, Conference Proceedings , 28. - 30. Sep. 2016, 2016.

C. Jürgenhake, T. Falkowski, and R. Dumitrescu, “Classification of MID-prototypes,” in 12th International Congress on Molded Interconnect Devices, Würzburg, 28. - 30. Sep. 2016, 2016.

M. Kage, M. Drewel, J. Gausemeier, and M. Schneider, “Value Network Design for Innovations: Developing Alternative Value Network Drafts,” Technology Innovation Management Review, vol. 6 (7), no. 7, pp. 21–33, 2016.

C. Jürgenhake and R. Dumitrescu, “Systematic for function-oriented development of spatial integrated circuit carriers,” in International Design Conference - Design 2016, 16. - 19. Mai 2016, 2016.

M. Kage, M. Drewel, J. Gausemeier, and M. Schneider, “Value Network Design for Innovations,” in Proceedings of the 5th ISPIM Innovation Forum, 2016.

L. Kaiser, C. Bremer, and R. Dumitrescu, “Exhaustiveness of Systems Structures in Model-Based Systems Engineering for Mechatronic Systems,” in Sysint - 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2016.

C. Jürgenhake, T. Falkowski, C. Fechtelpeter, and R. Dumitrescu, “Function-based feasibility study and benchmark for MID concepts,” in Sysint - 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2016.

L. H. Bretz, C. Tschirner, and R. Dumitrescu, “A concept for managing information in early stages of product engineering by integrating MBSE and workflow management systems,” in IEEE ISSE: Proceedings of 2016 International Symposium on Systems Engineering, 2016, pp. 143–150.

J. Gausemeier et al., Additive Fertigung. acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.

S. Olma, A. Kohlstedt, P. Traphöner, K.-P. Jäker, and A. Trächtler, “Indirect Force Control in Hardware-in-the-Loop Simulations for a Vehicle Axle Test Rig,” in 14th International Conference on Control, Automation Robotics &; Vision (ICARCV), 2016.

F. Abrishamchian and A. Trächtler, Eds., Feature Model Based Interface Design for Development of Mechatronic Systems. IEEE, 2016.

J. Holtkötter, J. Michael, C. Henke, A. Trächtler, F. Oestersötebier, and S. Wessels, “PROFINET-Implementierung im Rahmen der Entwicklung eines intelligenten, selbstlernenden Teigkneters,” in Virtuelle Instrumente in der Praxis 2016, 2016.

F. Bertelsmeier, J. Pollmann, and A. Trächtler, “A HRRN based scheduling for FMS and RMS with networked control and product-intelligence,” in Inproceedings of the IEEE IECON 2016, 2016.

A. T. Rüting, L. M. Blumenthal, and A. Trächtler, “Model Predictive Feedforward Compensation for Control of Multi Axes Hybrid Kinematics on PLC,” in Proceedings of IEEE IECON 2016, 2016.

S. Olma, P. Traphöner, A. Kohlstedt, and A. Trächtler, “Nichtlineare Zustandsregelung mit Sliding-Mode-Beobachter für einen Achsprüfstand mit hydraulischem Hexapoden,” in GMA Fachausschuss 1.40 “Theoretische Verfahren der Regelungstechnik,” 2016.

S. Olma, A. Kohlstedt, P. Traphöner, K.-P. Jäker, and A. Trächtler, “Substructuring and Control Strategies for Hardware-in-the-Loop Simulations of Multiaxial Suspension Test Rigs,” in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016.

D. Bielawny, P. Wang, and A. Trächtler, “Study of a rail-bound parallel robot concept with curvilinear closed-path tracks,” in Proceedings of 7th IFAC Symposium on Mechatronic Systems &; 15th Mechatronics Forum International Conference, 2016.

S. Peitz, M. Graeler, C. Henke, M. Hessel-von Molo, M. Dellnitz, and A. Trächtler, “Multiobjective Model Predictive Control of an Industrial Laundry,” 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, vol. Procedia Technology 26, pp. 483 – 490, 2016.

F. Oestersötebier, P. Traphöner, F. Reinhart, S. Wessels, and A. Trächtler, “Design and Implementation of Intelligent Control Software for a Dough Kneader,” in Proceedings of the 3rd International Conference on System-Integrated Intelligence, 2016.

F. Oestersötebier, F. Abrishamchian, C. Lankeit, V. Just, and A. Trächtler, “Approach for an Integrated Model-Based System Design of Intelligent Dynamic Systems Using Solution and System Knowledge,” in Proceedings of the 3rd International Conference on System-Integrated Intelligence, 2016.

S. Olma, P. Traphöner, A. Kohlstedt, K.-P. Jäker, and A. Trächtler, “Model-based method for the accuracy analysis of Hardware-in-the-Loop test rigs for mechatronic vehicle axles,” in Proceedings of the 3rd International Conference on System-Integrated Intelligence, 2016.

S. Wang, V. Just, and A. Trächtler, “Disturbance Observer Design for Utilizing of Time-delayed Vision Measurements in High Dynamic Systems,” in Proceedings of the 3rd International Conference on System-Integrated Intelligence, 2016.

F. Bertelsmeier, S. Schöne, and A. Trächtler, “Development and design of intelligent product carriers for û02exible networked control of distributed manufacturing processes,” in Inproceedings of the IEEE 24th Mediterranean Confernce on Control and Automation (MED), 2016.

A. Kohlstedt, S. Olma, S. Flottmeier, P. Traphöner, K.-P. Jäker, and A. Trächtler, “Control of a hydraulic hexapod for a Hardware-in-the-Loop axle test rig,” at-Automatisierungstechnik, vol. 64, no. 5, pp. 365–374, 2016.

C. Lankeit, V. Just, and A. Trächtler, “Consistency Analysis for Requirements, Functions, and System Elements,” in IEEE Systems Conference, 2016.

V. Geneiß, C. Hedayat, F. Bertelsmeier, C. Henke, K.-E. Vathauer, and T. Geßner, “Product Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing and Intralogistic Processes,” in Inproceedings of Smart Systems Integration 2016 International Conference and Exhibition on integration of materials, devices and systems, 2016.

J. Michael, J. Holtkötter, C. Henke, and A. Trächtler, “Modellbildung und Simulation im Kontext des Systems Engineering,” in ASIM-Treffen STS/GMMS 2016, 2016, pp. 174–179.

J. Michael, M. Hillebrand, B. Wohlers, C. Henke, R. Dumitrescu, and A. Trächtler, “Implementing intelligent technical systems into smart homes by using model based systems engineering and multi-agent systems,” Renewable Energy and Power Quality Journal (RE&;PQJ) 16, vol. 1, no. 14, pp. 359–364, 2016.

A. Pai, M. Riepold, and A. Trächtler, “Precision Control of SMA Actuators with a Real Time Model-Based Controller and Extended VSC,” IFAC-PapersOnLine, vol. 49, no. 21, pp. 66–73, 2016.

O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, and A. Trächtler, Regelungstechnik . VDE-Verlag, 2016.

A. Pai, M. Riepold, and A. Trächtler, “A model extended temperature and strain controller modulated with PWM for precision position control of shape memory alloy actuators,” in IEEE International Conference on Advanced Intelligent Mechatronics AIM, 2016.

D. Kruse, A. P. Warkentin, M. Krüger, A. Trächtler, and S. Rackow, “Multidomänenmodell zur Optimierung der Hydraulik eines Raupenlaufwerks für Landmaschinen,” in Proc. 4. Internationales Commercial Vehicle Technology Symposium, 2016.

C. Wuthishuwong and A. Trächtler, “Consensus-based local information coordination for the networked control of the autonomous intersection management,” Complex &; Intelligent Systems, vol. doi:10.1007/747-016-0032-6, pp. 1–16, 2016.

Z. Shareef and A. Trächtler, “Simultaneous path planning and trajectory optimization for robotic manipulators using discrete mechanics and optimal control,” Robotica, vol. 34, no. 06, pp. 1322–1334, 2016.

J. Renninger and A. Trächtler, “Verbesserte Schätzung von Fahrdynamikgrößen durch Modellierung der Fahrwerks-und Lenkkinematik,” at-Automatisierungstechnik, vol. 64, no. 5, pp. 346–354, 2016.

M. Bockholt, M. Katter, G. Pohl, J. Michael, and T. Alpögger, “A Tool Chain for Model-Based Development of Heat Pump Dryers,” in 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, 2016.

G. Deppe and R. Koch, “Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 81–92.

T. Reiher and R. Koch, “Product optimization with and for Additive Manufacturing,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2236–2249.

C. Lindemann and R. Koch, “Cost Efficient Design and Planning for Additive Manufacturing Technologies,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 93–112.

C. Lindemann, G. Deppe, and R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.

U. Jahnke and R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.

S. Schwichtenberg, “Automatized Derivation of Comprehensive Specifications for Black-box Services,” in Proceedings of the 38th International Conference on Software Engineering Companion (ICSE), 2016, pp. 815–818.

T. Reiher, G. Deppe, and R. Koch, “Combining material efficiency and part reliability by product optimization applying additive manufacturing,” in International Conference Production Engineering and Management 2016, 2016, vol. 6, pp. 27–38.

G. Deppe and R. Koch, “Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung,” in Rapid Tech 2016, 2016, vol. 13, pp. 349–360.

S. Heppner, M. Dransfeld, and G. Domik, “Adding atmospheric scattering and transparency to a deferred rendering pipeline for camera based ADAS tests,” in Informatik 2016, 2016, pp. 1591–1604.

S. Heppner, M. Dransfeld, and G. Domik, “A Deferred Rendering Pipeline Including a Global Illumination Model for Atmospheric Scattering and Transparency,” in Vision, Modeling &; Visualization, 2016.

K. Yanaka and T. Yamanouchi, “D Image Display Courses for Information Media Students,” IEEE Computer Graphics and Applications, vol. 36, no. 2, pp. 68–73, 2016.

B. S. Santos, B. Q. Ferreira, and P. Dias, “Using Heuristic Evaluation to Foster Visualization Analysis and Design Skills,” IEEE Computer Graphics and Applications, vol. 36, no. 1, pp. 86–90, 2016.

A. Jungmann and B. Kleinjohann, “Automatic Composition of Service-based Image Processing Applications,” in Proceedings of the 13th IEEE International Conference on Services Computing (SCC), 2016, pp. 106--113.

B. Jazayeri, “Architectural Management of On-The-Fly Computing Markets,” in Proceedings of the 10th European Conference on Software Architecture (ECSA Workshops), 2016, p. 42.

D. Rumlich, Evaluating bilingual education in Germany: CLIL students’ general English proficiency, EFL self-concept and interest. Frankfurt am Main, Germany: Lang, 2016.

F. Nüske, R. Schneider, F. Vitalini, and F. Noé, “Variational tensor approach for approximating the rare-event kinetics of macromolecular systems,” The Journal of Chemical Physics, 2016.

I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, and T. Reiher, “Data Management for additive manufacturing: survey on requirements and current state,” in 14th International DESIGN Conference 2016, 2016, vol. 14.

M. Keller, Application Deployment at Distributed Clouds. Universität Paderborn, 2016.

M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,”10.1007/s11837-016-2197-2__in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi:10.1007/s11837-016-2197-2 .

E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.

M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,”10.3139/9783446450608.010__in Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, 2016, pp. 121–133, doi:10.3139/9783446450608.010 .

M. Beutner and J. Schneider, “The Importance of OER in European Education,” in OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project, M. Beutner, Ed. Köln, 2016, pp. 11–17.

M. Beutner and J. Schneider, “The EU-StORe Project,” in OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project, M. Beutner, Ed. Köln, 2016, pp. 19–27.

M. Beutner and J. Schneider, “The OER Quality Standards,” in OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project, M. Beutner, Ed. Köln, 2016, pp. 29–41.

M. Beutner, C. Duse, R. Pechuel, and J. Schneider, “Insights in the OER Rating – Database – Structures, Advantages and Challanges,” in OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project, M. Beutner, Ed. Köln, 2016, pp. 43–50.

M. Beutner and J. Schneider, “Use and Implementation of OERs in Germany,” in OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project, M. Beutner, Ed. Köln, 2016, pp. 53–61.

M. Beutner and J. Schneider, “Evaluation Results concerning OER and the EU-StORe Project,” in OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project, M. Beutner, Ed. Köln, 2016, pp. 117–133.

M. Beutner, Ed., OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project. Köln: IK Verlag, 2016.

M. Beutner, Ed., Innovative Ansätze zum Serious Mobile Learning für Aus- und Weiterbildung. Köln: IK Verlag, 2016.

M. Beutner, Ed., Sounds and Audios in E-learning scenarios. Results and Discussions on the basis of the SEEL project. Köln: IK Verlag, 2016.

M. Beutner, Innovatives Micro-Learning im Handwerk – Konzeption auf Basis der Struktur der OPALESCE Learning Units sowie handwerksbezogene Umsetzungsbeispiele aus dem Bereich Rechnungswesen. Köln: IK Verlag, 2016.

M. Beutner and J. Schneider, SEEL – Expertenhandbuch. SEEL – Handbook for experts. Paderborn: IK Verlag, 2016.

P. Sitarek, K. Ryczko, J. Misiewicz, D. Reuter, and A. Wieck, “Optical Transitions between Confined and Unconfined States in p-Type Asymmetric GaAs/InGaAs/AlGaAs QW Structures,” Acta Physica Polonica A, vol. 120, no. 5, pp. 849–851, 2016.

J. Jadczak et al., “Exciton Exchange between Nearly-Free and Acceptor-Bound States of a Positive Trion Assisted by Cyclotron Excitation,” Acta Physica Polonica A, vol. 119, no. 5, pp. 600–601, 2016.

S. Hess  and H. G. Fischer, Eds., Mensch und Computer 2016 - Usability Professionals. Tagungsband. Aachen: Gesellschaft für Informatik e.V. und German UPA e.V., 2016.

R. Martins Freivalds, G. Engels, and B. Catania, Eds., SOFSEM 2016: Theory and Practice of Computer Science. Springer, 2016.

P. Van Gorp and G. Engels, Eds., Theory and Practice of Model Transformations - 9th International Conference ICMT 2016, Held as Part of STAF 2016, Vienna, Austria, July 4-5, 2016, Proceedings, vol. 9765. Springer, 2016.

R. Martins Freivalds, G. Engels, B. Catania, and R. Spanek, Eds., SOFSEM 2016: Theory and Practice of Computer Science - Proceedings Volume II. Springer, 2016.

J. Schumacher, “Erkunden mathematischer Strukturen anstatt Interpretation in Modellen – Ein innermathematischer Zugang zu negativen Zahlen,” in Beiträge zum Mathematikunterricht 2016, 2016.

M. Fazal-Baqaie and F. Kluthe, “Automated Quality Analysis of Software Engineering Method Models,” in Proceedings of the 4th International Conference on Model-Driven Engineering and Software Development, 2016.

M. Fazal-Baqaie, B. Güldali, and M. Grieger, “Ganzheitliches Qualitätsmanagement in agilen Groß- Projekten,” in Proceedings of Projektmanagement und Vorgehensmodelle 2016, 2016, pp. 109–120.

M. Grieger, M. Fazal-Baqaie, G. Engels, and M. Klenke, “Concept-Based Engineering of Situation-Specific Migration Methods,” in Proceedings of the 15th International Conference on Software Reuse (ICSR), 2016, pp. 199–214.

G. Rauchecker and G. Schryen, “Projekt KUBAS: Koordination ungebundener Vor-Ort-Helfer,” Im Einsatz, vol. 23, pp. 44–46, 2016.

C. Voss, H. Perks, R. Sousa, L. Witell, and N. Wünderlich, “Reflections on Context in Service Research.,” Journal of Service Management, vol. 27, no. 1, pp. 30–36, 2016.

M. Reif, M. Eichberg, B. Hermann, J. Lerch, and M. Mezini, “Call graph construction for Java libraries,” in Proceedings of the 2016 24th ACM SIGSOFT International Symposium on Foundations of Software Engineering - FSE 2016, 2016.

E. Yigitbas, T. Kern, P. Urban, and S. Sauer, “Multi-device UI Development for Task-Continuous Cross-Channel Web Applications,” in Current Trends in Web Engineering - ICWE 2016 International Workshops, DUI, TELERISE, SoWeMine, and Liquid Web, Lugano, Switzerland, June 6-9, 2016, Revised Selected Papers, 2016, pp. 114–127.

E. Yigitbas and S. Sauer, “Engineering Context-Adaptive UIs for Task-Continuous Cross-Channel Applications,” in Human-Centered and Error-Resilient Systems Development - IFIP WG 13.2/13.5 Joint Working Conference 6th International Conference on Human-Centered Software Engineering, HCSE 2016, and 8th International Conference on Human Error, Safety, and System Development, HESSD 2016 Stockholm, Sweden, August 29-31, 2016, Proceedings, 2016, pp. 281–300.

E. Yigitbas and S. Sauer, “Customized UI Development Through Context-Sensitive GUI Patterns,” in Mensch und Computer 2016 - Workshopband, Aachen, Germany, September 4-7, 2016, 2016.

H. G. Fischer, M. Rose, E. Yigitbas, and P. Forbrig, “Towards a Task Driven Approach Enabling Continuous User Requirements Engineering,” in Joint Proceedings of REFSQ-2016 Workshops, Doctoral Symposium, Research Method Track, and Poster Track co-located with the 22nd International Conference on Requirements Engineering: Foundation for Software Quality (REFSQ 2016), Gothenburg, Sweden, March 14, 2016., 2016.

I. Jovanovikj, M. Grieger, and E. Yigitbas, “Towards a Model-Driven Method for Reusing Test Cases in Software Migration Projects,” Softwaretechnik-Trends, Proceedings of the 18th Workshop Software-Reengineering &; Evolution (WSRE) &; 7th Workshop Design for Future (DFF), vol. 36, no. 2, pp. 65–66, 2016.

T. F. Strothmann, “The Impact of Communication Patterns on Distributed Self-Adjusting Binary Search Tree,” Journal of Graph Algorithms and Applications, vol. 20, no. 1, pp. 79–100, 2016.

X. Li and R. Peeters, “‘Cheap Talk with Multiple Strategically Interacting Audiences: An Experimental Study’ ,” “Cheap Talk with Multiple Strategically Interacting Audiences: An Experimental Study” , 2016.

A. Boschmann, A. Agne, L. Witschen, G. Thombansen, F. Kraus, and M. Platzner, “FPGA-based acceleration of high density myoelectric signal processing,” in 2015 International Conference on ReConFigurable Computing and FPGAs (ReConFig), 2016.