Grothe, R., et al. “Scanning Kelvin Probe Blister Test Measurements of Adhesive Delamination – Bridging the Gap between Experiment and Theory.”10.1016/j.ijadhadh.2016.11.006__International Journal of Adhesion and Adhesives, 2016, pp. 8–15, doi:10.1016/j.ijadhadh.2016.11.006.

Hunold, Oliver, et al. “Influence of O2 Exposure on the Interaction between C and Amorphous AlY.”10.1016/j.apsusc.2016.09.092__Applied Surface Science, 2016, pp. 1165–72, doi:10.1016/j.apsusc.2016.09.092.

Torun, Boray, et al. “In SituPM-IRRAS Studies of Organothiols and Organosilane Monolayers-ZnO Interfaces at High Water Activities.”10.1002/sia.6058__Surface and Interface Analysis, 2016, pp. 71–74, doi:10.1002/sia.6058.

Yasakau, K. A., et al. “Influence of Stripping and Cooling Atmospheres on Surface Properties and Corrosion of Zinc Galvanizing Coatings.”10.1016/j.apsusc.2016.07.093__Applied Surface Science, 2016, pp. 144–56, doi:10.1016/j.apsusc.2016.07.093.

Hordych, Illia, et al. “Effect of Pre-Rolling Heat Treatments on the Bond Strength of Cladded Galvanized Steels in a Cold Roll Bonding Process.”10.1002/srin.201600021__Steel Research International, 2016, pp. 1619–26, doi:10.1002/srin.201600021.

Weiss, J., et al. “Ageing Mechanisms of Polyurethane Adhesive/Steel Interfaces.”10.1016/j.ijadhadh.2016.06.009__International Journal of Adhesion and Adhesives, 2016, pp. 167–75, doi:10.1016/j.ijadhadh.2016.06.009.

Pohl, K., et al. “Adhesion and Corrosive Delamination of Epoxy Films on Chemically Etched ZnMgAl-Alloy Coatings.”10.1002/maco.201608968__Materials and Corrosion, 2016, pp. 1020–26, doi:10.1002/maco.201608968.

Schmidt, Hans Christian, et al. Cold Pressure Welding by Incremental Rolling: Deformation Zone Analysis. 2016, doi:10.1063/1.4963507.

Röltgen, Daniel, et al. “Einsatz- und Nutzenpotentiale von Augmented Reality im Kontext von Industrie 4.0.” VDE Kongress 2016 Internet of Things, Mannheim, Deutschland, 7. - 8. Nov. 2016, 2016.

Falkowski, Tommy, et al. “Einsatz von Leuchten zur Standortbestimmung in der Produktion.” VDE Kongress 2016, 7. - 8. Nov. 2016, 2016.

Westermann, Matthias, et al. “Reference Architecture and Maturity Levels for Cyber-Physical Systems.” 2nd IEEE International Symposium on Systems Engineering 2016, Edinburgh, Scotland, 4. - 5. Okt. 2016, 2016.

Fechtelpeter, Christian, et al. “Reliability in MID - Barriers, Potentials, Fields of Action.” 12th International Congress on Molded Interconnect Devices, Conference Proceedings , 28. - 30. Sep. 2016, 2016.

Jürgenhake, Christoph, et al. “Classification of MID-Prototypes.” 12th International Congress on Molded Interconnect Devices, Würzburg, 28. - 30. Sep. 2016, 2016.

Kage, Martin, et al. “Value Network Design for Innovations: Developing Alternative Value Network Drafts.” Technology Innovation Management Review, vol. 6 (7), no. 7, 2016, pp. 21–33.

Jürgenhake, Christoph, and Roman Dumitrescu. “Systematic for Function-Oriented Development of Spatial Integrated Circuit Carriers.” International Design Conference - Design 2016, 16. - 19. Mai 2016, 2016.

Kage, Martin, et al. “Value Network Design for Innovations.” Proceedings of the 5th ISPIM Innovation Forum, 2016.

Kaiser, Lydia, et al. “Exhaustiveness of Systems Structures in Model-Based Systems Engineering for Mechatronic Systems.” Sysint - 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2016.

Jürgenhake, Christoph, et al. “Function-Based Feasibility Study and Benchmark for MID Concepts.” Sysint - 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2016.

Bretz, Lukas Helmut, et al. “A Concept for Managing Information in Early Stages of Product Engineering by Integrating MBSE and Workflow Management Systems.” IEEE ISSE: Proceedings of 2016 International Symposium on Systems Engineering, 2016, pp. 143–50.

Gausemeier, Jürgen, et al. Additive Fertigung. acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.

Olma, Simon, et al. “Indirect Force Control in Hardware-in-the-Loop Simulations for a Vehicle Axle Test Rig.” 14th International Conference on Control, Automation Robotics &; Vision (ICARCV), IEEE, 2016.

Abrishamchian, Farisoroosh, and Ansgar Trächtler, editors. Feature Model Based Interface Design for Development of Mechatronic Systems. IEEE, 2016.

Holtkötter, Jens, et al. “PROFINET-Implementierung Im Rahmen Der Entwicklung Eines Intelligenten, Selbstlernenden Teigkneters.” Virtuelle Instrumente in Der Praxis 2016, VDE Verlag, 2016.

Bertelsmeier, Fabian, et al. “A HRRN Based Scheduling for FMS and RMS with Networked Control and Product-Intelligence.” Inproceedings of the IEEE IECON 2016, IEEE, 2016.

Rüting, Arne Thorsten, et al. “Model Predictive Feedforward Compensation for Control of Multi Axes Hybrid Kinematics on PLC.” Proceedings of IEEE IECON 2016, IEEE, 2016.

Olma, Simon, et al. “Nichtlineare Zustandsregelung Mit Sliding-Mode-Beobachter Für Einen Achsprüfstand Mit Hydraulischem Hexapoden.” GMA Fachausschuss 1.40 “Theoretische Verfahren Der Regelungstechnik,” VDI/VDE-GMA, 2016.

Olma, Simon, et al. “Substructuring and Control Strategies for Hardware-in-the-Loop Simulations of Multiaxial Suspension Test Rigs.” Proceedings of the 7th IFAC Symposium on Mechatronic Systems, IFAC, 2016.

Bielawny, Dirk, et al. “Study of a Rail-Bound Parallel Robot Concept with Curvilinear Closed-Path Tracks.” Proceedings of 7th IFAC Symposium on Mechatronic Systems &; 15th Mechatronics Forum International Conference, 2016.

Peitz, Sebastian, et al. “Multiobjective Model Predictive Control of an Industrial Laundry.” 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, vol. Procedia Technology 26, 2016, pp. 483 – 490.

Oestersötebier, Felix, et al. “Design and Implementation of Intelligent Control Software for a Dough Kneader.” Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, 2016.

Oestersötebier, Felix, et al. “Approach for an Integrated Model-Based System Design of Intelligent Dynamic Systems Using Solution and System Knowledge.” Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, 2016.

Olma, Simon, et al. “Model-Based Method for the Accuracy Analysis of Hardware-in-the-Loop Test Rigs for Mechatronic Vehicle Axles.” Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, 2016.

Wang, Shuo, et al. “Disturbance Observer Design for Utilizing of Time-Delayed Vision Measurements in High Dynamic Systems.” Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, 2016.

Bertelsmeier, Fabian, et al. “Development and Design of Intelligent Product Carriers for FLexible Networked Control of Distributed Manufacturing Processes.” Inproceedings of the IEEE 24th Mediterranean Confernce on Control and Automation (MED), IEEE, 2016.

Kohlstedt, Andreas, et al. “Control of a Hydraulic Hexapod for a Hardware-in-the-Loop Axle Test Rig.” At-Automatisierungstechnik, vol. 64, no. 5, 2016, pp. 365–74.

Lankeit, Christopher, et al. “Consistency Analysis for Requirements, Functions, and System Elements.” IEEE Systems Conference, 2016.

Geneiß, Volker, et al. “Product Data and Sensor-Based Intelligent Drive Control for Flexible Manufacturing and Intralogistic Processes.” Inproceedings of Smart Systems Integration 2016 International Conference and Exhibition on Integration of Materials, Devices and Systems, 2016.

Michael, Jan, et al. “Modellbildung Und Simulation Im Kontext Des Systems Engineering.” ASIM-Treffen STS/GMMS 2016, 2016, pp. 174–79.

Michael, Jan, et al. “Implementing Intelligent Technical Systems into Smart Homes by Using Model Based Systems Engineering and Multi-Agent Systems.” Renewable Energy and Power Quality Journal (RE&;PQJ) 16, vol. 1, no. 14, 2016, pp. 359–64.

Pai, Arathi, et al. “Precision Control of SMA Actuators with a Real Time Model-Based Controller and Extended VSC.” IFAC-PapersOnLine, vol. 49, no. 21, 2016, pp. 66–73.

Föllinger, Otto, et al. Regelungstechnik . VDE-Verlag, 2016.

Pai, Arathi, et al. “A Model Extended Temperature and Strain Controller Modulated with PWM for Precision Position Control of Shape Memory Alloy Actuators.” IEEE International Conference on Advanced Intelligent Mechatronics AIM, 2016.

Kruse, Daniel, et al. “Multidomänenmodell Zur Optimierung Der Hydraulik Eines Raupenlaufwerks Für Landmaschinen.” Proc. 4. Internationales Commercial Vehicle Technology Symposium, 2016.

Wuthishuwong, Chairit, and Ansgar Trächtler. “Consensus-Based Local Information Coordination for the Networked Control of the Autonomous Intersection Management.” Complex &; Intelligent Systems, vol. doi:10.1007/747-016-0032-6, 2016, pp. 1–16.

Shareef, Zeeshan, and Ansgar Trächtler. “Simultaneous Path Planning and Trajectory Optimization for Robotic Manipulators Using Discrete Mechanics and Optimal Control.” Robotica, vol. 34, no. 06, 2016, pp. 1322–34.

Renninger, Johannes, and Ansgar Trächtler. “Verbesserte Schätzung von Fahrdynamikgrößen Durch Modellierung Der Fahrwerks-Und Lenkkinematik.” At-Automatisierungstechnik, vol. 64, no. 5, 2016, pp. 346–54.

Bockholt, Marcos, et al. “A Tool Chain for Model-Based Development of Heat Pump Dryers.” 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2016.

Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive Manufacturing in the MRO Aerospace Business by MADM.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 81–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf.

Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2236–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf.

Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive Manufacturing Technologies.”http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 93–112, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf.

Lindemann, C., et al. Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.

Jahnke, U., and R. Koch. Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.

Schwichtenberg, Simon. “Automatized Derivation of Comprehensive Specifications for Black-Box Services.”10.1145/2889160.2889271__Proceedings of the 38th International Conference on Software Engineering Companion (ICSE), 2016, pp. 815–18, doi:10.1145/2889160.2889271.

Reiher, T., et al. “Combining Material Efficiency and Part Reliability by Product Optimization Applying Additive Manufacturing.”https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf__International Conference Production Engineering and Management 2016, vol. 6, 2016, pp. 27–38, doi:https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf.

Deppe, G., and R. Koch. “Unterstützung Des AM Entscheidungsprozesses in Der Luftfahrtersatzteilversorgung.”https://doi.org/10.3139/9783446450608.031__Rapid Tech 2016, vol. 13, Hanser Verlag, 2016, pp. 349–60, doi:https://doi.org/10.3139/9783446450608.031.

Heppner, Sabrina, et al. “Adding Atmospheric Scattering and Transparency to a Deferred Rendering Pipeline for Camera Based ADAS Tests.” Informatik 2016, edited by Martin Pinzger and Heinrich Mayr, Gesellschaft für Informatik e.V., 2016, pp. 1591–604.

Heppner, S., et al. “A Deferred Rendering Pipeline Including a Global Illumination Model for Atmospheric Scattering and Transparency.”10.2312/vmv.20161458__Vision, Modeling &; Visualization, edited by M. Hullin et al., The Eurographics Association, 2016, doi:10.2312/vmv.20161458.

Yanaka, K., and T. Yamanouchi. “D Image Display Courses for Information Media Students.”10.1109/MCG.2016.36__IEEE Computer Graphics and Applications, vol. 36, no. 2, Editors G. Domik and G. S. Owen, 2016, pp. 68–73, doi:10.1109/MCG.2016.36.

Santos, B. S., et al. “Using Heuristic Evaluation to Foster Visualization Analysis and Design Skills.”10.1109/MCG.2016.7__IEEE Computer Graphics and Applications, vol. 36, no. 1, IEEE, 2016, pp. 86–90, doi:10.1109/MCG.2016.7.

Jungmann, Alexander, and Bernd Kleinjohann. “Automatic Composition of Service-Based Image Processing Applications.”10.1109/SCC.2016.21__Proceedings of the 13th IEEE International Conference on Services Computing (SCC), 2016, pp. 106--113, doi:10.1109/SCC.2016.21.

Jazayeri, Bahar. “Architectural Management of On-The-Fly Computing Markets.”10.1145/2993412.3010821__Proceedings of the 10th European Conference on Software Architecture (ECSA Workshops), ACM, 2016, p. 42, doi:10.1145/2993412.3010821.

Rumlich, Dominik. Evaluating Bilingual Education in Germany: CLIL Students’ General English Proficiency, EFL Self-Concept and Interest. Lang, 2016.

Nüske, Feliks, et al. “Variational Tensor Approach for Approximating the Rare-Event Kinetics of Macromolecular Systems.”10.1063/1.4940774__The Journal of Chemical Physics, 054105, 2016, doi:10.1063/1.4940774.

Gräßler, I., et al. “Data Management for Additive Manufacturing: Survey on Requirements and Current State.”https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE__14th International DESIGN Conference 2016, vol. 14, 2016, doi:https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE.

Keller, Matthias. Application Deployment at Distributed Clouds. Universität Paderborn, 2016.

Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.”10.1007/s11837-016-2197-2__27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 563–568, doi:10.1007/s11837-016-2197-2.

Moritzer, Elmar, et al. “Universelle Mikrobearbeitungsplaffform Und Basistechnologien Für Das Fertigen Und Markieren Mikrophysiologischer Systeme.” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ, vol. 6, 2016, pp. 65–70.

Fischer, M., et al. “Chemical Surface Treatment of Ultem 9085 Parts.”10.3139/9783446450608.010__Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, Carl Hanser Verlag GmbH &; Co. KG, 2016, pp. 121–33, doi:10.3139/9783446450608.010.

Beutner, Marc, and J. Schneider. “The Importance of OER in European Education.” OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, edited by Marc Beutner, 2016, pp. 11–17.

Beutner, Marc, and J. Schneider. “The EU-StORe Project.” OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, edited by Marc Beutner, 2016, pp. 19–27.

Beutner, Marc, and J. Schneider. “The OER Quality Standards.” OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, edited by Marc Beutner, 2016, pp. 29–41.

Beutner, Marc, et al. “Insights in the OER Rating – Database – Structures, Advantages and Challanges.” OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, edited by Marc Beutner, 2016, pp. 43–50.

Beutner, Marc, and J. Schneider. “Use and Implementation of OERs in Germany.” OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, edited by Marc Beutner, 2016, pp. 53–61.

Beutner, Marc, and J. Schneider. “Evaluation Results Concerning OER and the EU-StORe Project.” OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project, edited by Marc Beutner, 2016, pp. 117–33.

Beutner, Marc, editor. OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the Basis of EU-StORe Project. IK Verlag, 2016.

Beutner, Marc, editor. Innovative Ansätze zum Serious Mobile Learning für Aus- und Weiterbildung. IK Verlag, 2016.

Beutner, Marc, editor. Sounds and Audios in E-Learning Scenarios. Results and Discussions on the Basis of the SEEL Project. IK Verlag, 2016.

Beutner, Marc. Innovatives Micro-Learning im Handwerk – Konzeption auf Basis der Struktur der OPALESCE Learning Units sowie handwerksbezogene Umsetzungsbeispiele aus dem Bereich Rechnungswesen. IK Verlag, 2016.

Beutner, Marc, and J. Schneider. SEEL – Expertenhandbuch. SEEL – Handbook for experts. IK Verlag, 2016.

Sitarek, P., et al. “Optical Transitions between Confined and Unconfined States in P-Type Asymmetric GaAs/InGaAs/AlGaAs QW Structures.”10.12693/aphyspola.120.849__Acta Physica Polonica A, vol. 120, no. 5, Institute of Physics, Polish Academy of Sciences, 2016, pp. 849–51, doi:10.12693/aphyspola.120.849.

Jadczak, J., et al. “Exciton Exchange between Nearly-Free and Acceptor-Bound States of a Positive Trion Assisted by Cyclotron Excitation.”10.12693/aphyspola.119.600__Acta Physica Polonica A, vol. 119, no. 5, Institute of Physics, Polish Academy of Sciences, 2016, pp. 600–01, doi:10.12693/aphyspola.119.600.

Hess , Steffen, and Holger Gerhard Fischer, editors. Mensch Und Computer 2016 - Usability Professionals. Tagungsband. Gesellschaft für Informatik e.V. und German UPA e.V., 2016.

Martins Freivalds, Rusins, et al., editors. SOFSEM 2016: Theory and Practice of Computer Science. Springer, 2016.

Van Gorp, Pieter, and Gregor Engels, editors. Theory and Practice of Model Transformations - 9th International Conference ICMT 2016, Held as Part of STAF 2016, Vienna, Austria, July 4-5, 2016, Proceedings. Vol. 9765, Springer, 2016.

Martins Freivalds, Rusins, et al., editors. SOFSEM 2016: Theory and Practice of Computer Science - Proceedings Volume II. Springer, 2016.

Schumacher, Jan. “Erkunden mathematischer Strukturen anstatt Interpretation in Modellen – Ein innermathematischer Zugang zu negativen Zahlen.” Beiträge zum Mathematikunterricht 2016, edited by Institut für Mathematik und Informatik Heidelberg, WTM-Verlag, 2016.

Fazal-Baqaie, Masud, and Frank Kluthe. “Automated Quality Analysis of Software Engineering Method Models.” Proceedings of the 4th International Conference on Model-Driven Engineering and Software Development, SCITEPRESS, 2016.

Fazal-Baqaie, Masud, et al. “Ganzheitliches Qualitätsmanagement in Agilen Groß- Projekten.” Proceedings of Projektmanagement Und Vorgehensmodelle 2016, Köllen Druck+Verlag GmbH, Bonn, 2016, pp. 109–20.

Grieger, Marvin, et al. “Concept-Based Engineering of Situation-Specific Migration Methods.” Proceedings of the 15th International Conference on Software Reuse (ICSR), Springer, 2016, pp. 199–214.

Rauchecker, Gerhard, and Guido Schryen. “Projekt KUBAS: Koordination Ungebundener Vor-Ort-Helfer.” Im Einsatz, vol. 23, Stumpf &; Kossendey, 2016, pp. 44–46.

Voss, Chris, et al. “Reflections on Context in Service Research.” Journal of Service Management, vol. 27, no. 1, Emerald Group Publishing Limited, 2016, pp. 30–36.

Reif, Michael, et al. “Call Graph Construction for Java Libraries.”10.1145/2950290.2950312__Proceedings of the 2016 24th ACM SIGSOFT International Symposium on Foundations of Software Engineering - FSE 2016, ACM Press, 2016, doi:10.1145/2950290.2950312.

Yigitbas, Enes, et al. “Multi-Device UI Development for Task-Continuous Cross-Channel Web Applications.”10.1007/978-3-319-46963-8‑10__Current Trends in Web Engineering - ICWE 2016 International Workshops, DUI, TELERISE, SoWeMine, and Liquid Web, Lugano, Switzerland, June 6-9, 2016, Revised Selected Papers, 2016, pp. 114–27, doi:10.1007/978-3-319-46963-8‑10.

Yigitbas, Enes, and Stefan Sauer. “Engineering Context-Adaptive UIs for Task-Continuous Cross-Channel Applications.”10.1007/978-3-319-44902-9‑18__Human-Centered and Error-Resilient Systems Development - IFIP WG 13.2/13.5 Joint Working Conference 6th International Conference on Human-Centered Software Engineering, HCSE 2016, and 8th International Conference on Human Error, Safety, and System Development, HESSD 2016 Stockholm, Sweden, August 29-31, 2016, Proceedings, 2016, pp. 281–300, doi:10.1007/978-3-319-44902-9‑18.

Yigitbas, Enes, and Stefan Sauer. “Customized UI Development Through Context-Sensitive GUI Patterns.”10.18420/muc2016-ws05-0004__Mensch Und Computer 2016 - Workshopband, Aachen, Germany, September 4-7, 2016, 2016, doi:10.18420/muc2016-ws05-0004.

Fischer, Holger Gerhard, et al. “Towards a Task Driven Approach Enabling Continuous User Requirements Engineering.” Joint Proceedings of REFSQ-2016 Workshops, Doctoral Symposium, Research Method Track, and Poster Track Co-Located with the 22nd International Conference on Requirements Engineering: Foundation for Software Quality (REFSQ 2016), Gothenburg, Sweden, March 14, 2016., 2016.

Jovanovikj, Ivan, et al. “Towards a Model-Driven Method for Reusing Test Cases in Software Migration Projects.” Softwaretechnik-Trends, Proceedings of the 18th Workshop Software-Reengineering &; Evolution (WSRE) &; 7th Workshop Design for Future (DFF), vol. 36, no. 2, 2016, pp. 65–66.

Strothmann, Thim Frederik. “The Impact of Communication Patterns on Distributed Self-Adjusting Binary Search Tree.”10.7155/jgaa.00385__Journal of Graph Algorithms and Applications, vol. 20, no. 1, Journal of Graph Algorithms and Applications, 2016, pp. 79–100, doi:10.7155/jgaa.00385.

Li, Xinyu, and Ronald Peeters. “‘Cheap Talk with Multiple Strategically Interacting Audiences: An Experimental Study’ .” “Cheap Talk with Multiple Strategically Interacting Audiences: An Experimental Study” , PLoS ONE, 2016.

Boschmann, Alexander, et al. “FPGA-Based Acceleration of High Density Myoelectric Signal Processing.”10.1109/reconfig.2015.7393312__2015 International Conference on ReConFigurable Computing and FPGAs (ReConFig), IEEE, 2016, doi:10.1109/reconfig.2015.7393312.