J. P. Brüggemann, L. Risse, G. Kullmer, and H. A. Richard, Entwicklung von Optimierungsstrategien für Strukturbauteile unter Ausnutzung der Potentiale des Laser-Strahlschmelzens. 2019, pp. 1–22.
LibreCat: /record/22113

L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen. 2019, pp. 35–56.
LibreCat: /record/22115

L. Risse and B. Schramm, “Möglichkeiten additiver Fertigungsverfahren im Zuge der Digitalisierung für den Planungsprozess chirurgischer Eingriffe,” in DVM - Bericht 1685, DVM-Tag 2019 – Bauteil verstehen, 2019, vol. 1685, pp. 103–120.
LibreCat: /record/22121

J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen,” in DVM - Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 251, pp. 207–218.
LibreCat: /record/22123

S. C. Woodcock, L. Risse, G. Kullmer, and H. A. Richard, “Bewertung von verschieden gearteten Gitterstrukturen in Bezug auf ihre Einsatzfähigkeit in Bandscheibenimplantaten,” in DVM - Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 404, pp. 151–162.
LibreCat: /record/22124

J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen,” in DVM-Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 251, pp. 207–218.
LibreCat: /record/22137

L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, F. Schlenker, and H. A. Richard, “Potentiale des Einsatzes individueller, additiv gefertigter medizinischer Hilfsmittel,” in DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, 2019, vol. 404, pp. 139–150.
LibreCat: /record/22140

J. P. Brüggemann et al., “Strukturoptimierung durch den Einsatz des Laser-Strahlschmelzprozesses zur realitätsnäheren Erfassung von Fahrzeug-Lastdaten,” in DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 404, pp. 69–82.
LibreCat: /record/22141

L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, “Reconstruction of a defective finger joint surface and development of an adapted external fixator,” in Lecture Notes in Computational Vision and Biomechanics , 2019, pp. 230–238.
LibreCat: /record/22144

S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,”10.3139/9783446462441.025__2019, doi:10.3139/9783446462441.025 .
LibreCat: /record/22198
DOI: 10.3139/9783446462441.025

T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat: /record/22442
DOI: https://www.euspen.eu/knowledge-base/AM19127.pdf

T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat: /record/22443
DOI: https://www.euspen.eu/knowledge-base/AM19129.pdf

T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” konstruktionspraxis, vol. 6, pp. 24–26, 2019.
LibreCat: /record/22444

N.-P. Kriegel, Konzeption eines energieeffizienten Betätigungs- und Haltesystems für eine Federkraftbremse. Shaker Verlag GmbH , 2019.
LibreCat: /record/22500

B. Hoyer and H. Haller, “The Common Enemy Effect under Strategic Network Formation and  Disruption,” Journal of Economic Behavior &; Organization, vol. 162, pp. 146–163, 2019.
LibreCat: /record/2256
DOI: 10.1016/j.jebo.2019.03.011

B. Hämisch, A. Büngeler, C. Kielar, A. Keller, O. Strube, and K. Huber, “Self-Assembly of Fibrinogen in Aqueous, Thrombin-Free Solutions of Variable Ionic Strengths,” Langmuir, vol. 35, pp. 12113–12122, 2019.
LibreCat: /record/22652
DOI: 10.1021/acs.langmuir.9b01515

S. Ramakrishnan et al., “Enhancing the stability of DNA origami nanostructures: staple strand redesign versus enzymatic ligation,” Nanoscale, vol. 11, pp. 16270–16276, 2019.
LibreCat: /record/22653
DOI: 10.1039/c9nr04460d

C. Kielar et al., “Effect of Staple Age on DNA Origami Nanostructure Assembly and Stability,” Molecules, vol. 24, p. 2577, 2019.
LibreCat: /record/22654
DOI: 10.3390/molecules24142577

S. Ramakrishnan, B. Shen, M. Kostiainen, G. Grundmeier, A. Keller, and V. Linko, “Real-Time Observation of Superstructure-Dependent DNA Origami Digestion by DNaseI Using High-Speed Atomic Force Microscopy.,” ChemBioChem, vol. 20, no. 22, pp. 2818–2823, 2019.
LibreCat: /record/22655
DOI: 10.1002/cbic.201900369
PMID: 31163091

S. Julin et al., “DNA origami directed 3D nanoparticle superlattice via electrostatic assembly.,” Nanoscale, vol. 11, no. 10, pp. 4546–4551, 2019.
LibreCat: /record/22656
DOI: 10.1039/c8nr09844a
PMID: 30806410

R. Hajiraissi et al., “Effect of Terminal Modifications on the Adsorption and Assembly of hIAPP(20–29),” ACS Omega, vol. 4, pp. 2649–2660, 2019.
LibreCat: /record/22657
DOI: 10.1021/acsomega.8b03028

D. Meinderink, A. G. Orive, S. Ewertowski, I. Giner, and G. Grundmeier, “Dependance of Poly(acrylic acid) Interfacial Adhesion on the Nanostructure of Electrodeposited ZnO Films,” ACS Applied Nano Materials, pp. 831–843, 2019.
LibreCat: /record/22686
DOI: 10.1021/acsanm.8b02091

D. Meinderink, K. J. R. Nolkemper, J. Bürger, A. G. Orive, J. K. N. Lindner, and G. Grundmeier, “Spray coating of poly(acrylic acid)/ZnO tetrapod adhesion promoting nanocomposite films for polymer laminates,” Surface and Coatings Technology, pp. 112–122, 2019.
LibreCat: /record/22687
DOI: 10.1016/j.surfcoat.2019.06.083

D. Eckelt, R. Bismark, R. Dumitrescu, M. Frank, J. Gausemeier, and J. Reinhold, “Strategische Planung des Wertschöpfungsbeitrags von HELLA für automatisiertes Fahren von morgen,” in Vorausschau und Technologieplanung, 2019, vol. 390, pp. 535–555.
LibreCat: /record/22708

R. Dumitrescu, S. Japs, L. Kaiser, and R. Rasor, “Model Checking of Integratively Designed Product and Production Systems,” in TdSE 2019, 2019.
LibreCat: /record/22709

A. Albers, K. F. Ellermann, A. Kühn, and R. Dumitrescu, “Entwicklung einer Suchstrategie für ein medienbasiertes Technologiesanning am Beispiel der Antriebstechnik,” in 15. Symposium für Vorausschau und Technologieplanung, 2019, vol. 390, pp. 277–291.
LibreCat: /record/22710

M. Drewel, J. Gausemeier, M. Vaßholz, and N. Homburg, “Einstieg in die Plattformökonomie,” in Symposium für Vorausschau und Technologieplanung, 2019, vol. 15.
LibreCat: /record/22712

C. Pierenkemper, J. Reinhold, R. Dumitrescu, and J. Gausemeier, “Erfolg versprechende Industrie 4.0-Zielposition - Ermittlung unter Berücksichtigung zukünftiger Umfeldentwicklungen,” Industrie 4.0 Management, vol. 5, pp. 30–34, 2019.
LibreCat: /record/22714

F. Wortmann, R. Joppen, M. Drewel, A. Kühn, and R. Dumitrescu, “Developing and Evaluating Concepts for a Digital Platform,” in IAMOT 2019 – Proceedings of the 28th International Association for Management of Technology Conference, Apr. 2019 International Association for Management of Technology (IAMOT), IAMOT, 2019.
LibreCat: /record/22716

J. Reinhold, M. Frank, C. Koldewey, R. Dumitrescu, and J. Gausemeier, “Competence-based Planning of Value Networks for Smart Services,” in Proceedings of the ISPIM Connects, 2019.
LibreCat: /record/22717

M. Bansmann, M. Foullois, D. Roeltgen, L. Wöste, and R. Dumitrescu, “Reference Architecture and Classification of technology-induced Scenarios of Digitized Work,” in  28th IAMOT International Conference of the International Association for Management of Technology, Mumbai, Indien, 2019.
LibreCat: /record/22721

L. Asmar, F. Wortmann, D. Röltgen, N. Niewöhner, A. Kühn, and R. Dumitrescu, “Framework for the configuration of an engineering based Makeathon,” in Proceedings of ISPIM Innovation Conference, 7.-9. April, Ottawa, 2019, 2019.
LibreCat: /record/22725

L. Bretz, L. Kaiser, and R. Dumitrescu, “An analysis of barriers for the introduction of Systems Engineering,” in Procedia CIRP Volume 84, 2019, pp. 783–789.
LibreCat: /record/22726

A. Albers, J. Tekaat, A. Kühn, and R. Dumitrescu, “Requirement Profiles as a Foundation for customer-centric Ideation in Business-to-Business Markets,” in 29th CIRP Design 2019, Porto, Portugal, May 8th - May 10th, 2019, 2019.
LibreCat: /record/22727

J. Gausemeier, R. Dumitrescu, J. Echterfeld, T. Pfänder, D. Steffen, and F. Thielemann, Innovationen für die Märkte von morgen – Strategische Planung von Produkten, Dienstleistungen und Geschäftsmodellen. München: Carl Hanser Verlag, 2019.
LibreCat: /record/22728

D. Hobscheidt, C. Jürgenhake, H. Anacker, and R. Dumitrescu, “Sociotechnical solution patterns for the development of smart products,” in 29th CIRP Design 2019, Povoa de Varzim, Portugal, May 8th - May 10th, 2019, 2019.
LibreCat: /record/22729

D. Hobscheidt, C. Fechtelpeter, A. Kühn, and R. Dumitrescu, “Using existing industry 4.0 knowledge for the assessment of SME innovation-demands,” in ISPIM Innovation Conference, Florence, Italien, 16.-19. Juni, 2019, Florence, Italien, 2019.
LibreCat: /record/22730

R. Joppen, S. von Enzberg, J. Gundlach, A. Kühn, and R. Dumitrescu, “Key Performance Indicators in the Production of the Future,” in  52nd CIRP Manufacturing Systems Conference, Ljubljana, 2019,  Ljubljana, 2019.
LibreCat: /record/22731

J. Gausemeier et al., Nationales Kompetenz-Monitoring - Bericht: Energiespeichersysteme (Fokus Lithium-Ionen-Speicher). acatech DISKUSSION, 2019.
LibreCat: /record/22732

C. Plass, K. Altemeier, M. Frank, U. Jahnke, and D. Steffen, Prävention gegen Produktpiraterie - Innovationen schützen; Intelligente Technische Systeme - Lösungen aus dem Spitzencluster it’s OWL. Springer-Verlag, 2019.
LibreCat: /record/22734

R. Joppen, S. von Enzberg, A. Kühn, and R. Dumitrescu, “Investitionsbewertung vor dem Hintergrund der Digitalisierung am Beispiel Schaltschrankbau,” Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), vol. Band 114, Ausgabe 7-8, no. 7–8, pp. 483–487, 2019.
LibreCat: /record/22735

D. Röltgen, F. Wortmann, E.-M. Grote, and R. Dumitrescu, “Designing Business Models for Augmented Reality,” in Proceedings of the 28th International Conference of the International Association for Management of Technology, April 7-11, Mumbai, 2019, Mumbai, 2019.
LibreCat: /record/22746

J. Heihoff-Schwede, L. Bretz, L. Kaiser, and R. Dumitrescu, “An Explanatory Model as Basis for the Introduction of Systems Engineering and capable IT-Infrastructures in Industry,” in  IEEE ISSE 2019, Edinburgh, Scotland, 2019, Edinburgh, Scotland, 2019.
LibreCat: /record/22747

J. Tekaat, A. Kharatyan, H. Anacker, and R. Dumitrescu, “Potentials for the Integration of Design Thinking along Automotive Systems Engineering focusing Security and Safety,” in Proceedings of the International Conference on Engineering Design (ICED 19), 5.-8. August 2019, Delft, Niederlande, 2019, Delft, Niederlande, 2019, 2019.
LibreCat: /record/22748

F. Wortmann, K. F. Ellermann, A. Kühn, and R. Dumitrescu, “Typisierung und Strukturierung digitaler Plattformen im Kontext Business-to-Business,” in Vorausschau und Technologieplanung, 15. Symposium für Vorausschau und Technologieplanung, 21.-22. November 2019, Berlin, Berlin, 2019.
LibreCat: /record/22749

M. Fockel, S. Merschjohann, M. Fazal-Baqaie, T. Förder, S. Hausmann, and B. Waldeck, “Designing and Integrating IEC 62443 Compliant Threat Analysis,” in European System, Software &; Service Process Improvement &; Innovation Conference (EuroSPI 2019), Edinburgh, UK, 2019, vol. 1060.
LibreCat: /record/22805
DOI: 10.1007/978-3-030-28005-5_5

H. C. Schmidt et al., “Joining of blanks by cold pressure welding: Incremental rolling and strategies for surface activation and heat treatment,” Materialwissenschaft und Werkstofftechnik, pp. 924–939, 2019.
LibreCat: /record/22830
DOI: 10.1002/mawe.201900031

L. Mai et al., “Potential Precursor Alternatives to the Pyrophoric Trimethylaluminium for the Atomic Layer Deposition of Aluminium Oxide,” Chemistry – A European Journal, pp. 7489–7500, 2019.
LibreCat: /record/22831
DOI: 10.1002/chem.201900475

D. Meinderink, A. G. Orive, S. Ewertowski, I. Giner, and G. Grundmeier, “Dependance of Poly(acrylic acid) Interfacial Adhesion on the Nanostructure of Electrodeposited ZnO Films,” ACS Applied Nano Materials, pp. 831–843, 2019.
LibreCat: /record/22832
DOI: 10.1021/acsanm.8b02091

L. Mai et al., “Low-Temperature Plasma-Enhanced Atomic Layer Deposition of Tin(IV) Oxide from a Functionalized Alkyl Precursor: Fabrication and Evaluation of SnO2-Based Thin-Film Transistor Devices,” ACS Applied Materials &; Interfaces, pp. 3169–3180, 2019.
LibreCat: /record/22833
DOI: 10.1021/acsami.8b16443

I. Hordych et al., “The role of heat-treatments performed before and after a cold roll bonding process of galvanized steel sheets,” in PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
LibreCat: /record/22834
DOI: 10.1063/1.5112581

L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, and O. Keßler, “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry,” in TMS 2019 148th Annual Meeting &; Exhibition Supplemental Proceedings, Cham, 2019.
LibreCat: /record/22835
DOI: 10.1007/978-3-030-05861-6_45

P. Biemelt, S. Mertin, N. Rüddenklau, S. Gausemeier, and A. Trächtler, “Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation,” presented at the  International Conference on Advances in System Simulation (SIMUL), Valencia, Spain, 2019.
LibreCat: /record/22970

N. Rüddenklau, P. Biemelt, S. Mertin, S. Gausemeier, and A. Trächtler, “Simulation-Based Lighting Function Development of High-Definition Headlamps,” in 13th International Symposium on Automotive Lighting (ISAL), vol. 18, utzverlag GmbH, 2019, pp. 677–686.
LibreCat: /record/22971

S. Mertin, D. Buse, M. Franke, A. Trächtler, S. Gausemeier, and F. Dressler, “Proof-of-Concept einer komplexen Co-Simulationsumgebung für einen Fahrsimulator zur Untersuchung von Car2X-Kommunikations-Szenarien,” in VDI/VDE AUTOREG 2019, 2019, pp. 159–170.
LibreCat: /record/22972

N. Rüddenklau, S. Gausemeier, and A. Trächtler, “Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems,” in VDI/VDE AUTOREG 2019, VDI- Verlag, Düsseldorf, 2019.
LibreCat: /record/22973

G. Nareyko, T. Koch, and A. Trächtler, “Model Predictive Control of an Active Roll Stabilization System,” in VDI/VDE Fachtagung AUTOREG, 2019.
LibreCat: /record/22974

M. Gräler, A. Wallow, C. Henke, and A. Trächtler, “Assisted setup of forming processes: architecture for the integration of non-adjustable disturbances,” Procedia CIRP, vol. 81, pp. 1348–1353, 2019.
LibreCat: /record/22975

J. Michael, C. Henke, and A. Trächtler, “Decentralized Energy Management for Smart Home System of Systems,” in Syscon 2019 - The 13th Annual IEEE International Systems Conference, 2019, vol. 13, pp. 524–531.
LibreCat: /record/22976

S. Schütz, A. T. Rüting, C. Henke, and A. Trächtler, “Regelung kollaborativer Robotersysteme zur benutzerfreundlichen, flexiblen Fertigung kleiner Losgrößen am Beispiel eines halbautomatischen Schweißvorgangs,” in Fachtagung Mechatronik 2019, 2019, vol. 13, pp. 43–48.
LibreCat: /record/22977

M. Riepold, S. Maslo, G. Han, C. Henke, and A. Trächtler, “Open-loop linearization for piezoelectric actuator with inverse hysteresis model,” Vibroengineering PROCEDIA, vol. 22, pp. 47–52, 2019.
LibreCat: /record/22978

A. T. Rüting, C. Henke, and A. Trächtler, “Umsetzung einer echtzeitfähigen modellprädiktiven Trajektorienplanung für eine mehrachsige Hybridkinematik auf einer Industriesteuerung,” at-Automatisierungstechnik, vol. 67, no. 4, pp. 326–336, 2019.
LibreCat: /record/22979

P. Traphöner, S. Olma, A. Kohlstedt, N. Fast, K.-P. Jäker, and A. Trächtler, “Hardware-in-the-Loop Simulation for a Multiaxial Suspension Test Rig with a Nonlinear Spatial Vehicle Dynamics Model,” in 8th IFAC Symposium on Mechatronic Systems, 2019.
LibreCat: /record/22980

P. Traphöner, A. Kohlstedt, S. Olma, K.-P. Jäker, and A. Trächtler, “Hardware-in-the-Loop-Simulation einer Fahrzeugachse mit aktiver Wankstabilisierung mithilfe eines hydraulischen Hexapoden,” in 13. VDI/VDE Mechatronik-Tagung, 2019, pp. 85–90.
LibreCat: /record/22981

N. Rüddenklau, P. Biemelt, S. Mertin, S. Gausemeier, and A. Trächtler, “Real-Time Lighting of High-Definition Headlamps for Night Driving Simulation,” in IARIA SysMea, vol. 12, IARIA, 2019, pp. 72–88.
LibreCat: /record/22982

D. Kruse, Teilautomatisierte Parameteridentifikation für die Validierung von Dynamikmodellen im modellbasierten Entwurf mechatronischer Systeme, vol. 388. Heinz Nixdorf Institut, Universität Paderborn, 2019.
LibreCat: /record/22983

G. Piskachev, L. N. Q. Do, and E. Bodden, “Codebase-adaptive detection of security-relevant methods,”10.1145/3293882.3330556__2019, doi:10.1145/3293882.3330556 .
LibreCat: /record/23378
DOI: 10.1145/3293882.3330556

S. Kummita and G. Piskachev, Integration of the Static Analysis Results Interchange Format in CogniCrypt. 2019.
LibreCat: /record/23389

C. Gerking and I. Budde, “Heuristic Inference of Model Transformation Definitions from Type Mappings,” in 2019 ACM/IEEE 22nd International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), 2019.
LibreCat: /record/23395
DOI: 10.1109/models-c.2019.00031

D. Rumlich, “Inwiefern verbessert bilingualer Sachfachunterricht die Englischkompetenzen von Schülerinnen und Schülern?,” in Die große Frage, S. Doff, T. Giesler, and M. Tödter, Eds. Trier, Germany: Wissenschaftlicher Verlag Trier, 2019, pp. 169–189.
LibreCat: /record/21897

C. Juchem-Grundmann, F. Matz, and D. Rumlich, “Freies Format 9: Nachwuchscafé,” in Sprachen lernen integriert: global, regional, lokal. Dokumentation zum 27. Kongress für Fremdsprachendidaktik der Deutschen Gesellschaft für Fremdsprachenforschung (DGFF). Jena, 27.-30. September 2017, C. Falkenhagen, H. Funk, M. Reinfried, and L. Volkmann, Eds. Baltmannsweiler, Germany: Schneider Hohengehren, 2019, pp. 449–452.
LibreCat: /record/21920

B. Diehr, A. Becker, C. Breul, S. Frisch, C. Kastens, and D. Rumlich, “Kohärenz im Englischstudium für die Primarstufe: Das Lehr-Lern-Konzept des Wuppertaler Projekts EULE,” in Kohärenz in der Lehrerbildung, K. Hellmann, J. Kreutz, M. Schwichow, and K. Zaki, Eds. Wiesbaden: Springer Fachmedien Wiesbaden, 2019, pp. 199–213.
LibreCat: /record/21923

K. Altemeier, M. Becker, S. Dziwok, T. Koch, and S. Merschjohann, “Was fehlt (bisher) um Apps sicher zu entwickeln? - Prozesse, Werkzeuge und Schulungen für sichere Apps by Design,” in Projektmanagement und Vorgehensmodelle 2019 (PVM 2019), 2019.
LibreCat: /record/21929

F. Nüske, L. Boninsegna, and C. Clementi, “Coarse-graining molecular systems by spectral matching,” The Journal of Chemical Physics, 2019.
LibreCat: /record/21944
DOI: 10.1063/1.5100131

I. Gräßler and C. Oleff, “Risikoorientierte Analyse und Handhabung von Anforderungsänderungen,” in Design for X - Beiträge zum 30. DfX-Symposium , 2019, vol. 30, pp. 49–60.
LibreCat: /record/22000
DOI:  10.35199/dfx2019.5

I. Gräßler, C. Oleff, and P. Scholle, “Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme,” in Fachtagung Mechatronik 2019 Paderborn, 2019, p. S. 1-6.
LibreCat: /record/22001
DOI:  10.17619/UNIPB/1-791

I. Gräßler, H. Thiele, C. Oleff, P. Scholle, and V. Schulze, “Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme,” in International Conference on Engineering Design (ICE), 2019, pp. 1265–1274.
LibreCat: /record/22002
DOI: 10.17619/UNIPB/1-791

E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,”http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf__in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf .
LibreCat: /record/22022
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf

K. Kliensieck, T. John, and D. Kundisch, “Applied procrastination research: Tackling procrastination by gamification,” in 11th Biennial Procrastination Research Conference, Sheffield, United Kingdom, 2019.
LibreCat: /record/8954

D. Szopinski, “Jumping, dumping, and pumping: Three mental principles for idea generation to activate software-based tools in business model innovation,” in Proceedings of the 32nd Bled eConference, Bled, Slovenia, 2019.
LibreCat: /record/9261

D. Szopinski, T. Schoormann, and D. Kundisch, “Because your taxonomy is worth it: Towards a framework for taxonomy evaluation,” in Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm, Sweden, 2019.
LibreCat: /record/9263

H.-H. Kremer and P. Rüsing, “Digitale Transformation – Rezeption aus Sicht der Akteure in der Fachschule am Berufskolleg,” berufsbildung Zeitschrift für Theorie-Praxis-Dialog, pp. 17–19, 2019.
LibreCat: /record/9267

S. B. Schneider, M. Peuster, D. Behnke, M. Marcel, P.-B. Bök, and H. Karl, “Putting 5G into Production: Realizing a Smart Manufacturing Vertical Scenario,” in European Conference on Networks and Communications (EuCNC), 2019.
LibreCat: /record/9270
DOI: 10.1109/eucnc.2019.8802016

S. Gottschalk, F. Rittmeier, and G. Engels, “Business Models of Store-Oriented Software Ecosystems: A Variability Modeling Approach,” in Business Modeling and Software Design, Lisbon, 2019, pp. 153–169.
LibreCat: /record/9275
DOI: 10.1007/978-3-030-24854-3_10

E. Yigitbas, K. Josifovska, I. Jovanovikj, F. Kalinci, A. Anjorin, and G. Engels, “Component-Based Development of Adaptive User Interfaces ,” in Proceedings of the 11th ACM SIGCHI Symposium on Engineering Interactive Computing Systems (EICS 2019), Valencia, 2019, pp. 13:1--13:7.
LibreCat: /record/9276

A. Sharma and H. Wehrheim, “Testing Balancedness of ML Algorithms,” in Proceedings of the Software Engineering Conference (SE), Stuttgart, 2019, vol. P-292, pp. 157–158.
LibreCat: /record/7752

T. Henksmeier, S. Shvarkov, A. Trapp, and D. Reuter, “Molecular beam epitaxy growth and temperature-dependent electrical characterization of carbon-doped GaAs on GaAs(1f1f1)B,” Journal of Crystal Growth, vol. 512, pp. 164–168, 2019.
LibreCat: /record/7800
DOI: 10.1016/j.jcrysgro.2019.02.006

A. E. Endres, S. Recker, B. Mir Djawadi, and B. Hoyer, “Network Formation and Disruption - An Experiment: Are equilibrium networks too complex?,” Journal of Economic Behavior and Organization , vol. 157, pp. 708–734, 2019.
LibreCat: /record/80
DOI: 10.1016/j.jebo.2018.11.004

M. Feldotto, Approximate Pure Nash Equilibria in Congestion, Opinion Formation and Facility Location Games. Universität Paderborn, 2019.
LibreCat: /record/8080
DOI: 10.17619/UNIPB/1-588

M. U. Maaz, A. Sprenger, and S. Hellebrand, A Hybrid Space Compactor for Varying X-Rates. Prien am Chiemsee: 31. Workshop “Testmethoden und Zuverlässigkeit von Schaltungen und Systemen” (TuZ’19), 2019.
LibreCat: /record/8112

M. Peuster, C. Dröge, C. Boos, and H. Karl, “Joint testing and profiling of microservice-based network services using TTCN-3,” ICT Express, 2019.
LibreCat: /record/8113
DOI: 10.1016/j.icte.2019.02.001

S. Dräxler and H. Karl, “SPRING: Scaling, Placement, and Routing of Heterogeneous Services with Flexible Structures,” in 5th IEEE International Conference on Network Softwarization (NetSoft) 2019, Paris.
LibreCat: /record/8240

F. S. Bäumer and M. Geierhos, “Requirements Engineering in OTF-Computing,” in encyclopedia.pub, Basel, Switzerland: MDPI, 2019.
LibreCat: /record/8312

G. Rauchecker and G. Schryen, “An Exact Branch-and-Price Algorithm for Scheduling Rescue Units during Disaster Response,” European Journal of Operational Research, vol. 272, no. 1, pp. 352–363, 2019.
LibreCat: /record/5674

V. Wolf, C. Bartelheimer, and D. Beverungen, “Digitalization of Work Systems—An Organizational Routines’ Perspective,” in Proceedings of the 52nd Hawaii International Conference on System Sciences (HICSS-52), Maui, Hawaii, 2019.
LibreCat: /record/4517

M. Pelster and A. Schertler, “Pricing and issuance dependencies in SFP portfolios,” Journal of Futures Markets, vol. 39, no. 3, pp. 342–365, 2019.
LibreCat: /record/4561
DOI: 10.1002/fut.21978

T. Schmiedel, O. Müller, and J. vom Brocke, “Topic Modeling as a Strategy of Inquiry in Organizational Research: A Tutorial With an Application Example on Organizational Culture,” Organizational Research Methods, pp. 941--968, 2019.
LibreCat: /record/4682
DOI: https://doi.org/10.1177/1094428118773858

C. Harteis, “Supporting learning at work in an era of digitalization of work,” in Work-based learning as a pathway to competence-based education, A. Bahl and A. Dietzen, Eds. Opladen: Barbara Budrich, 2019, pp. 85–97.
LibreCat: /record/4798

D. Gutt, J. Neumann, S. Zimmermann, D. Kundisch, and J. Chen, “Design of Review Systems – A Strategic Instrument to shape Online Reviewing Behavior and Economic Outcomes,” Journal of Strategic Information Systems, vol. 28, no. 2, pp. 104–117, 2019.
LibreCat: /record/7413

F. Rittmeier, G. Engels, and A. Teetz, “Process Weakness Patterns for the Identification of Digitalization Potentials in Business Processes,” in Business Process Management Workshops, vol. 342, F. Daniel,  Quan Z. Sheng, and H. Motahari, Eds. Cham: Springer International Publishing, 2019, pp. 531–542.
LibreCat: /record/7430
DOI: 10.1007/978-3-030-11641-5_42