J. Magenheim and C. Schulte, “Data science education,” Encyclopedia of Education and Information Technologies. Cham: Springer, 2020.

C. Schulte, L. Budde, and F. Winkelnkemper, “Programmieren - Lehren und Lernen mit und über Medien,” in Mobile Medien im Schulkontext, Springer, 2020, pp. 215–240.

T. Wu, S. R. Tinkloh, T. Tröster, and W. Zinn, “Residual stress measurement in GFRP/steel hybrid components,” in Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany, 2020.

T. Zentgraf, S. Chen, G. Li, and S. Zhang, “Plasmonic metasurfaces for controlling harmonic generations,” in Nanoantennas and Plasmonics: Modelling, design and fabrication, D. H. Werner, S. D. Campbell, and L. Kang, Eds. The Institution of Engineering and Technology, 2020.

R. Tischendorf et al., “Examination of the evolution of iron oxide nanoparticles in flame spray pyrolysis by tailored in situ particle sampling techniques,” Journal of Aerosol Science, 2020.

E. Unruh, D. Hein, and G. Meschut, “Analytische Auslegung der Schwingfestigkeit geclinchter Verbindungen,” in 10. Fügetechnisches Gemeinschaftskolloquium, 2020.

P. Bähr, S. Sommer, E. Unruh, D. Hein, and G. Meschut, “Charakterisierung und Modellierung von Kerbeffekten durch Mischverbindungen in Karosseriebauteilen aus höchstfesten Stählen,” 2020.

A. A. Camberg and T. Tröster, “A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter.” 2020.

A. A. Camberg, T. Erhart, and T. Tröster, “Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework,” presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea, 2020.

S. Strauß and S. Schäfer-Althaus, “Transient Bodies, Bodies in Transition: An Introduction,” in Transient Bodies in Anglophone Literature and Culture, S. Strauß and S. Schäfer-Althaus, Eds. Heidelberg: Winter, 2020, pp. 7–22.

S. Strauß, “Ageing (Female) Bodies and Mortality in Eighteenth-Century Poetry,” in Transient Bodies in Anglophone Literature and Culture, S. Strauß and S. Schäfer-Althaus, Eds. Heidelberg: Winter, 2020, pp. 205–226.

S. Strauß, “Visualising Memory Loss and the Politics of Representation in Contemporary Portraiture,” Journal for the Study of British Cultures, vol. 27, no. 1, pp. 63–76, 2020.

S. Sievers, D. Degen, D. Kim, and J. Kengelbach, “How Private Equity can leverage downturn M&;A for value creation,” M&;A Review Europe , 2020.

S. Sievers and S. Alexander, What matters for organizing M&;As successfully? 2020.

S. Sievers, G. Keienburg, D. Degen, T. Söllner, and A. Kashyrkin, Alternative Deals Gain Traction. The Boston Consulting Group, Inc., M&;A Report, 2020.

S. Sievers, D. Degen, D. Kim, and J. Kengelbach, “Downturn M&;A: Die Erfolgsstrategie der Stunde?,” M&;A Review, pp. 266–271, 2020.

C. Hoffmann and K. Thommes, “Can digital feedback increase employee performance and energy efficiency in firms? Evidence from a field experiment,” Journal of Economic Behavior &; Organization, pp. 49–65, 2020.

C. Grund, C. Harbring, K. Thommes, and K. R. Tilkes, “Decisions on Extending Group Membership—Evidence from a Public Good Experiment,” Games, 2020.

J. Blömer, S. Brauer, and K. Bujna, “A Complexity Theoretical Study of Fuzzy K-Means,” ACM Transactions on Algorithms, vol. 16, no. 4, pp. 1–25, 2020.

A. Knüppel et al., “Using Abstract Contracts for Verifying Evolving Features and Their Interactions,” in Lecture Notes in Computer Science, Cham, 2020.

J. Bürger, T. Riedl, and J. K. N. Lindner, “Influence of lens aberrations, specimen thickness and tilt on differential phase contrast STEM images,” Ultramicroscopy, 2020.

J. Bürger, V. S. Kunnathully, D. Kool, J. K. N. Lindner, and K. Brassat, “Characterisation of the PS-PMMA Interfaces in Microphase Separated Block Copolymer Thin Films by Analytical (S)TEM,” Nanomaterials, 2020.

C. Riha, S. S. Buchholz, O. Chiatti, A. D. Wieck, D. Reuter, and S. F. Fischer, “Excess noise in      Al x   Ga  1  xAs/GaAs based quantum rings,” Applied Physics Letters, 2020.

A. El Mesaoudi-Paul, D. Weiß, V. Bengs, E. Hüllermeier, and K. Tierney, “Pool-Based Realtime Algorithm Configuration: A Preselection Bandit Approach,” in Learning and Intelligent Optimization. LION 2020., vol. 12096, Cham: Springer, 2020, pp. 216–232.

A. El Mesaoudi-Paul, V. Bengs, and E. Hüllermeier, “Online Preselection with Context Information under the Plackett-Luce  Model,” arXiv:2002.04275. .

M. Graf-Schlattmann, D. M. Meister, G. Oevel, and M. Wilde, “Kollektive Veränderungsbereitschaft als zentraler Erfolgsfaktor von Digitalisierungsprozessen an Hochschulen,” in Zeitschrift für Hochschulentwicklung, Jg.15/Nr. 1 (März 2020)., 2020, pp. 19–39.

E. Yigitbas, C. B. Tejedor, and G. Engels, “Experiencing and Programming the ENIAC in VR,” in Proceedings of the Mensch und Computer 2020 (MuC ’20), 2020.

M. Augstein, D. Buschek, E. Herder, B. Loepp, E. Yigitbas, and J. Ziegler, “UCAI 2020 - 1st International Workshop on User-Centered Artificial Intelligence,” in Proceedings of the Mensch und Computer 2020 (MuC ’20), 2020.

S. Böttcher, R. Hartel, and S. Peeters, “QSGG: query simulation in grammar-compressed graphs,” in Proceedings of The International Workshop on Semantic Big Data, 2020.

S. Böttcher, R. Hartel, and S. Peeters, “Pattern Search in Grammar-Compressed Graphs,” in 2020 Data Compression Conference (DCC) (Poster), 2020.

M. Skowronek, Approaches for Competetive Routing through Intersections of Hole Abstractions in Hybrid Communication Networks. Universität Paderborn, 2020.

J. Heimann, Distributed Key Generation for Attribute-Based Signatures. 2020.

E. Yigitbas, I. Jovanovikj, J. Scholand, and G. Engels, “VR Training for Warehouse Management ,” in Proceedings of the 26th ACM Symposium on Virtual Reality Software and Technology (VRST), 2020.

P. Büker and J. Höke, Bildungsdokumentation in KiTa und Grundschule stärkenorientiert gestalten, vol. 7. Stuttgart: Kohlhammer, 2020.

S. Gottschalk, E. Yigitbas, E. Schmidt, and G. Engels, “Model-based Product Configuration in Augmented Reality Applications,” in Human-Centered Software Engineering. HCSE 2020, Eindhoven, 2020, vol. 12481.

A. Tornede, M. D. Wever, S. Werner, F. Mohr, and E. Hüllermeier, “Run2Survive: A Decision-theoretic Approach to Algorithm Selection based on Survival Analysis,” presented at the 12th Asian Conference on Machine Learning, Bangkok, Thailand, 2020.

C. Koldewey, M. Meyer, P. Stockbrügger, R. Dumitrescu, and J. Gausemeier, “Framework and Functionality Patterns for Smart Service Innovation,” Procedia CIRP, no. 91, pp. 851–857, 2020.

A. Setzer, Local Graph Transformation Primitives For Some Basic Problems In Overlay Networks. Universität Paderborn, 2020.

Y. Vukadinovic et al., “When Donors Turn into Acceptors: Ground and Excited State Properties of FeII Complexes with Amine-Substituted Tridentate Bis-imidazole-2-ylidene Pyridine Ligands,” Inorganic Chemistry, pp. 8762–8774, 2020.

P. Schürmann, A Group Signature Scheme from Flexible Public Key Signatures and Structure-Preserving Signatures on Equivalence Classes. Universität Paderborn, 2020.

T. Terfort, Enhancing Security by Usage of Universal One-Way Hash Functions. Universität Paderborn, 2020.

A. Guggenmos, Algorithmen für selbststabilisierende Skip+-Delaunaygraphen. Universität Paderborn, 2020.

J. P. Brüggemann et al., “Strukturoptimierung einer Messradkomponente zur realitätsnäheren Erfassung von Fahrzeuglastdaten und Bruchmechanische Bewertung,” in DVM-Bericht 252, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 252.

J. P. Brüggemann, L. Risse, S. C. Woodcock, G. Kullmer, and H. A. Richard, “Einsatz von Topologieoptimierungssoftware - Der Ersatz für den Ingenieur?,” in DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 405.

L. Risse and G. Kullmer, “Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf,” in DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 405.

D. Kundisch, Digitale mehrseitige Plattformen – Besser verstehen, wie digitale Plattformen funktionieren, vol. 3. 2020.

C. Kummert, W. Diekmann, K. Tews, and H.-J. Schmid, “Influence of Part Microstructure on Mechanicl Properties of PX Laser Sintered Specimens,” in 29th Annual International Solid Freeform Fabrication Symposium, 2020, vol. 29, pp. 735–744.

D. Kundisch, Das Technologiedesign umfassend und strukturiert anpassen, vol. 2. 2020.

D. Kundisch, Förderung von Kompetenzen im Bereich Wirtschat 4.0 an Fachschulen, vol. 1. 2020.

A. H. J. Salten, J. F. Makowiak, J. K. Makowiak, and E. Kenig, “A new hydrodynamic analogy model for the determination of transport phenomena in random packings,” Chemical Engineering Science, vol. 233, 2020.

A. H. J. Salten, T. Ehlert, J. F. Makowiak, J. Makowiak, and E. Kenig, “Einfluss der Füllkörpergeometrie und Strömungsformen auf die Trennleistung von Absorptionskolonnen,” 2020.

J. F. Makowiak, J. Makowiak, A. H. J. Salten, and E. Kenig, “Entwicklung eines Gitterfüllkörpers ENVIPAC 4 unterstützt durch prädiktive Modellierung,” presented at the 10. ProcessNet-Jahrestagung und 34. DECHEMA-Jahrestagung der Biotechnologen, Web-Konferenz, 2020.

M. Bothe, A. Fedorov, H. Frei, N. Lutters, and E. Kenig, “Entwicklung modellbasierter Werkzeuge zur Vermeidung von Notfallsituationen bei der chemischen Absorption,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik, Adsorption und Extraktion, Berchtesgaden, 2020.

M. Wende, K. Philippi, and E. Kenig, “Numerische Simulation von Gravidestillationsapparaten zur Trennung eines binären Ethanol/WasserGemisches,”10.1002/cite.202055148__Chemie Ingenieur Technik, vol. 92, no. 9, pp. 1297–1298, 2020, doi:10.1002/cite.202055148 .

D. M. Meister and I. Mindt, Eds., Mobile Medien im Schulkontext. Wiesbaden, 2020.

D. Meister and I. Mindt, “Einleitung,” in Mobile Medien im Schulkontext, vol. 41, Wiesbaden: Springer VS, 2020, pp. 1–6.

I. Mindt and Y. Kaymak, “Digitale Elemente im Englischunterricht,” in Mobile Medien im Schulkontext, vol. 41, D. Meister and I. Mindt, Eds. Wiesbaden: Springer VS, 2020, pp. 155–174.

R. Schmidt, N. Dietrich, and I. Mindt, “Viele Wege führen nach Rom - Möglichkeiten und Modelle des Inverted-Classroom-Modells aus interdisziplinärer Sicht,” in Digitale Innovationen und Kompetenzen in der Lehramtsausbildung, M. Beißwenger, Ed. 2020.

I. Mindt, R. Schmidt, M. Beißwenger, and N. Dietrich, “Mit digitalen Arbeitsformen das Lernen bereichern: zur Gestaltung sinnstiftender Präsenzphasen mit dem Inverted-Classroom-Modell,” in Digitale Innovationen und Kompetenzen in der Lehramtsausbildung, M. Beißwenger, B. Bulizek, I. Gryl, and F. Schacht, Eds. Duisburg: Universitätsverlag Rhein-Ruhr, 2020, pp. 165–207.

I. Mindt and R. Schmidt, “Student engagement im Inverted Classrom,” in Tagungsband zur Tagung Inverted Classroom and beyond 2020, G. Brandhofer, J. Buchner, C. Freisleben-Teutscher, and K. Tengler, Eds. Norderstedt: BoD, 2020, pp. 1–16.

I. Mindt, “Kristin Bech and Ruth Möhlig-Falke, eds. Grammar – Discourse – Context: Grammar and Usage in Language Variation and Change. Berlin and Boston, MA: De Gruyter, 2019,” vol. 31, no. 3. pp. 247–248, 2020.

C. Hübner, Beitrag zur Bewertung der funktionalen Sicherheit von Federkraftbremsen. Düren: Shaker Verlag GmbH, 2020.

J. Tominski, Entwurf eines Simulationsmodells zur Beurteilung und Beeinflussung des dynamischen Betriebsverhalten von Spindelhubantrieben mit Trapezgewindespindel. Shaker Verlag GmbH, 2020.

M. Hanke, A. Gonzalez Orive, G. Grundmeier, and A. Keller, “Effect of DNA Origami Nanostructures on hIAPP Aggregation,” Nanomaterials, vol. 10, p. 2200, 2020.

S. Ramakrishnan, S. Subramaniam, C. Kielar, G. Grundmeier, A. F. Stewart, and A. Keller, “Protein-Assisted Room-Temperature Assembly of Rigid, Immobile Holliday Junctions and Hierarchical DNA Nanostructures,” Molecules, vol. 25, p. 5099, 2020.

Y. Xin, S. Martinez Rivadeneira, G. Grundmeier, M. Castro, and A. Keller, “Self-assembly of highly ordered DNA origami lattices at solid-liquid interfaces by controlling cation binding and exchange,” Nano Research, vol. 13, pp. 3142–3150, 2020.

C. Kielar, S. Zhu, G. Grundmeier, and A. Keller, “Quantitative Assessment of Tip Effects in SingleMolecule HighSpeed Atomic Force Microscopy Using DNA Origami Substrates,” Angewandte Chemie International Edition, vol. 59, pp. 14336–14341, 2020.

Y. Xin, X. Ji, G. Grundmeier, and A. Keller, “Dynamics of lattice defects in mixed DNA origami monolayers,” Nanoscale, vol. 12, pp. 9733–9743, 2020.

Y. Xin et al., “Cryopreservation of DNA Origami Nanostructures,” Small, vol. 16, p. 1905959, 2020.

A. Keller and V. Linko, “Challenges and Perspectives of DNA Nanostructures in Biomedicine,” Angewandte Chemie International Edition, vol. 59, pp. 15818–15833, 2020.

A. Keller and G. Grundmeier, “Amyloid aggregation at solid-liquid interfaces: Perspectives of studies using model surfaces,” Applied Surface Science, vol. 506, p. 144991, 2020.

J. Huang et al., “Arranging Small Molecules with Subnanometer Precision on DNA Origami Substrates for the SingleMolecule Investigation of Protein–Ligand Interactions,” Small Structures, vol. 1, p. 2000038, 2020.

D. Meinderink, Molecular adhesion science and engineering of nanostructured poly(acrylic acid)/metal oxide interfaces. 2020.

R. Grothe, S. Knust, D. Meinderink, M. Voigt, A. G. Orive, and G. Grundmeier, “Spray pyrolysis of thin adhesion-promoting ZnO films on ZnMgAl coated steel,” Surface and Coatings Technology, 2020.

M. Stefszky et al., “Waveguide resonator with an integrated phase modulator for second harmonic generation,”10.1364/oe.412824__Optics Express, Art. no. 1991, 2020, doi:10.1364/oe.412824 .

P. Hermanns, S. Boeddeker, V. Bracht, N. Bibinov, G. Grundmeier, and P. Awakowicz, “Investigation of the frequency dependent spatio-temporal dynamics and controllability of microdischarges in unipolar pulsed plasma electrolytic oxidation,” Journal of Physics D: Applied Physics, 2020.

P. Hermanns, S. Boeddeker, V. Bracht, N. Bibinov, G. Grundmeier, and P. Awakowicz, “Investigation of the frequency dependent spatio-temporal dynamics and controllability of microdischarges in unipolar pulsed plasma electrolytic oxidation,” Journal of Physics D: Applied Physics, 2020.

J. C. Calderón et al., “Multilayer coatings based on the combination of perfluorinated organosilanes and nickel films for injection moulding tools,” Surface and Coatings Technology, 2020.

L. Liphardt, S. Disson, K. Suematsu, and G. Grundmeier, “Kinetic studies of cathode degradation as caused by ice formation in MEAs,” International Journal of Hydrogen Energy, pp. 23151–23159, 2020.

M. Schneider, K. Kremmer, M. Voigt, and G. Grundmeier, “Investigation of the passive layer on a solid-state sintered silicon carbide ceramic formed in sulfuric acid,” Corrosion Science, 2020.

P. Biemelt, S. Gausemeier, and A. Trächtler, “Design and Objective Evaluation of Filter- and Optimization-based Motion Cueing Strategies for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom,” International Journal On Advances in Systems and Measurements, vol. 13, no. 3 &; 4, pp. 203–219, 2020.

P. Biemelt, S. Mertin, N. Rüddenklau, S. Gausemeier, and A. Trächtler, “Design and Evaluation of a Novel Filter-Based Motion Cueing Strategy for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom,” in Proceedings of the Driving Simulation Conference Europe VR, Antibes, France, 2020, pp. 85–92.

S. Mertin, K. Malena, C. Link, S. Gausemeier, and A. Trächtler, “Macroscopic Traffic Flow Control using Consensus Algorithms,” in The 23rd IEEE International Conference on Intelligent Transportation Systems, 2020, vol. 23.

G. Nareyko, P. Biemelt, and A. Trächtler, “Real-Time Optimized Model Predictive Control of an Active Roll Stabilization System with Actuator Limitations,” presented at the 21st IFAC World Congress, Berlin, Germany, 2020.

P. Biemelt, C. Link, S. Gausemeier, and A. Trächtler, “A Model-Based Online Reference Prediction Strategy for Model Predictive Motion Cueing Algorithms,” in Proceedings of the 21st IFAC World Congress, Berlin, Germany, 2020, pp. 6082–6088.

S. Schütz, A. T. Rüting, C. Henke, and A. Trächtler, “Echtzeitfähige Planung optimierter Trajektorien für sensorgeführte, kinematisch redundante Mechanismen auf einer Industriesteuerung,” in Entwurf komplexer Automatisierungssysteme (EKA), 2020.

L. Hermerschmidt, A. Straub, and G. Piskachev, “Language-agnostic Injection Detection,” in 2020 IEEE Security and Privacy Workshops (SPW), 2020.

G. Piskachev, L. Nguyen Quang Do, O. Johnson, and E. Bodden, “SWAN_ASSIST: Semi-Automated Detection of Code-Specific, Security-Relevant Methods,”10.1109/ase.2019.00110__2020, doi:10.1109/ase.2019.00110 .

G. Piskachev, T. Petrasch, J. Späth, and E. Bodden, “AuthCheck: Program-State Analysis for Access-Control Vulnerabilities,” in Lecture Notes in Computer Science, Cham, 2020.

S. Schweizer, E. F. Akbulut Irmak, and T. Tröster, “Wood-based materials as a sustainable alternative for future car body construction,” presented at the Future Materials, vitual, 2020.

J. Schuster, T. Y. Kim, E. Batke, D. Reuter, and A. D. Wieck, “Two-dimensional electron bound hole photoluminescence in GaAs in perpendicular magnetic fields,” Semiconductor Science and Technology, 2020.

T. Riedl, V. S. Kunnathully, A. Trapp, T. Langer, D. Reuter, and J. K. N. Lindner, “Strain-driven InAs island growth on top of GaAs(111) nanopillars,” Physical Review Materials, 2020.

S. Klus, F. Nüske, and B. Hamzi, “Kernel-Based Approximation of the Koopman Generator and Schrödinger Operator,” Entropy, 2020.

M. Tönnies and E. Voigts, “Posthuman Dystopia: Animal Surrealism and Permanent Crisis in Contemporary British Theatre,” Journal of Contemporary Drama in English, vol. 8, no. 2, pp. 295–312, 2020.

D. Rumlich, “Bilingual education in monolingual contexts: a comparative perspective,” The Language Learning Journal, vol. 48, no. 1, pp. 115–119, 2020.

F. Matz and D. Rumlich, “Englischsprachige Jugendbücher innerhalb und außerhalb des Englischunterrichts – Young Adult Fiction als empirischer Gegenstand der Literaturdidaktik,” in KONTROVERS. Literaturdidaktik meets Literaturwissenschaft, A. Grünewald, M. Hethey, and K. Struve, Eds. Trier, Germany: Wissenschaftlicher Verlag Trier, 2020, pp. 159–176.

F. Matz, M. Rogge, and D. Rumlich, “Die mündliche Prüfung in der Sekundarstufe II: Herausforderung und Chance für die Fremdsprachendidaktik,” in Testen bildungssprachlicher Kompetenzen und akademischer Sprachkompetenzen – Zugänge für Schule und Hochschule, A. Drackert, M. Mainzer-Murrenhoff, A. Soltyska, and A. Timukova, Eds. Frankfurt am Main, Germany: Lang, 2020, pp. 17–34.

T. Koch, M. Meyer, M. Fazal-Baqaie, and H. Runschke, “Softwareentwicklung wie am Fliessband,” in Software Engineering 2020 (SE 2020), 2020.

J. Tominski and D. Zimmer, “Entwurf eines Simulationsmodells zur Bewertung des Betriebsverhaltens von elektromechanischen Spindelhubantrieben,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 72, no. 4, pp. 72–82, 2020.

K. J. Spychala, P. Mackwitz, A. Widhalm, G. Berth, and A. Zrenner, “Spatially resolved light field analysis of the second-harmonic signal of <7(2)-materials in the tight focusing regime,” Journal of Applied Physics, 2020.