A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,”10.1016/j.msea.2021.141662__Materials Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi:10.1016/j.msea.2021.141662 .

S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,”10.1016/j.ijfatigue.2021.106498__International Journal of Fatigue, vol. 153, Art. no. 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498 .

J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants,”10.1016/j.matlet.2021.130890__Materials Letters, vol. 306, Art. no. 130890, 2021, doi:10.1016/j.matlet.2021.130890 .

A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,”10.1016/j.jmatprotec.2021.117183__Journal of Materials Processing Technology, Art. no. 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183 .

S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,”10.1007/s11665-021-06065-9__Journal of Materials Engineering and Performance, vol. 30, no. 11, pp. 8048–8056, 2021, doi:10.1007/s11665-021-06065-9 .

W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,”10.1016/j.surfcoat.2021.127384__Surface and Coatings Technology, Art. no. 127384, 2021, doi:10.1016/j.surfcoat.2021.127384 .

B. Kivská et al., “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet,”10.3390/ma14247771__Materials, vol. 14, no. 24, Art. no. 7771, 2021, doi:10.3390/ma14247771 .

M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,”10.1002/mawe.202000288__Materialwissenschaft und Werkstofftechnik, vol. 52, pp. 703–716, 2021, doi:10.1002/mawe.202000288 .

M. Cieslar et al., “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM,”10.1017/s1431927621013398__Microscopy and Microanalysis, vol. 27, no. , pp. 79–80, 2021, doi:10.1017/s1431927621013398 .

J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,”10.1016/j.jallcom.2021.159544__Journal of Alloys and Compounds, vol. 871, Art. no. 159544, 2021, doi:10.1016/j.jallcom.2021.159544 .

B. Kivská et al., “Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM,”10.1017/s1431927621013453__Microscopy and Microanalysis, vol. 27, no. , pp. 91–92, 2021, doi:10.1017/s1431927621013453 .

S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,”10.1016/j.addma.2021.102087__Additive Manufacturing, vol. 46, Art. no. 102087, 2021, doi:10.1016/j.addma.2021.102087 .

A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,”10.1016/j.msea.2021.142312__Materials Science and Engineering: A, Art. no. 142312, 2021, doi:10.1016/j.msea.2021.142312 .

S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,”10.1007/s11665-021-06065-9__Journal of Materials Engineering and Performance, 2021, doi:10.1007/s11665-021-06065-9 .

K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,”10.1108/rpj-01-2021-0017__Rapid Prototyping Journal, 2021, doi:10.1108/rpj-01-2021-0017 .

J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,”10.1016/j.jallcom.2021.159544__Journal of Alloys and Compounds, Art. no. 159544, 2021, doi:10.1016/j.jallcom.2021.159544 .

M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,”10.3390/met11081304__Metals, Art. no. 1304, 2021, doi:10.3390/met11081304 .

D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,”10.1007/s11740-020-01006-2__Production Engineering, vol. 15, no. 2, pp. 263–270, 2021, doi:10.1007/s11740-020-01006-2 .

K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, and W. Bremser, “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte,”10.1002/celc.202100216__ChemElectroChem, pp. 2155–2168, 2021, doi:10.1002/celc.202100216 .

A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,”10.1016/j.msea.2021.141662__Materials Science and Engineering: A, Art. no. 141662, 2021, doi:10.1016/j.msea.2021.141662 .