Widany, Kai-Uwe, and Rolf Mahnken. “Approximation of the Dual Problem for Error Estimation in Inelastic Problems.”https://doi.org/10.1002/pamm.201410124__PAMM, 2014, 273–74.https://doi.org/10.1002/pamm.201410124 .
LibreCat: /record/24708
DOI: 10.1002/pamm.201410124

Cheng, Chun, Rolf Mahnken, Eckart Uhlmann, and Ivan Mitkov Ivanov. “Macroscopic and Mesoscopic Modeling Based on the Concept of Generalized Stresses for Cutting Simulation.”https://doi.org/10.1002/pamm.201410197__PAMM, 2014, 419–20.https://doi.org/10.1002/pamm.201410197 .
LibreCat: /record/24702
DOI: 10.1002/pamm.201410197

Dammann, Christian, and Rolf Mahnken. “A Macroscopic Consitutive Model on Induced Anisotropy for Polymers with Weighting Functions.”https://doi.org/10.1002/pamm.201410181__PAMM, 2014, 387–88.https://doi.org/10.1002/pamm.201410181 .
LibreCat: /record/24701
DOI: 10.1002/pamm.201410181

Dammann, C., Ismail Caylak, and Rolf Mahnken. “Experimental Investigation of PC-Films Using Optical Measurements.”https://doi.org/10.3139/217.2848__International Polymer Processing, 2014, 260–71.https://doi.org/10.3139/217.2848 .
LibreCat: /record/24707
DOI: 10.3139/217.2848

Heim, Hans-Peter , Angela  Ries, Volker Sch  "o ppner, Andrea  Wibbeke, Stefan  Turek,  Hogenrich Damanik, Rolf Mahnken, et al. “Self-Reinforced Thermoplastic Composites - Composite Materials (Part 1).” Kunststoffe International 104 (2014): 31–35.
LibreCat: /record/28381

Mahnken, Rolf, A. Schneidt, T. Antretter, U. Ehlenbröker, and M. Wolff. “Multi-Scale Modeling of Bainitic Phase Transformation in Multi-Variant Polycrystalline Low Alloy Steels.”https://doi.org/10.1016/j.ijsolstr.2014.10.021__International Journal of Solids and Structures, 2014, 156–71.https://doi.org/10.1016/j.ijsolstr.2014.10.021 .
LibreCat: /record/24700
DOI: 10.1016/j.ijsolstr.2014.10.021

Dammann, C., and Rolf Mahnken. “On the Simulation of Strain Induced Anisotropy for Polymers,”https://doi.org/10.1063/1.4873891__2014.https://doi.org/10.1063/1.4873891 .
LibreCat: /record/24706
DOI: 10.1063/1.4873891

Mahnken, Rolf, and Nicole Nörenberg. “Parameter Identification for Rubber Materials with Artificial Higher Dimensional Data.”https://doi.org/10.1002/pamm.201410201__PAMM, 2014, 427–28.https://doi.org/10.1002/pamm.201410201 .
LibreCat: /record/24703
DOI: 10.1002/pamm.201410201

Ehlenbröker, Ulrich, and Rolf Mahnken. “Bainitic Variant Evolution in a Low-Alloyed Steel Including Numerical Aspects.”https://doi.org/10.1002/pamm.201410178__PAMM, 2014, 381–82.https://doi.org/10.1002/pamm.201410178 .
LibreCat: /record/24704
DOI: 10.1002/pamm.201410178

Heim, Hans-Peter , Angela   Ries, Volker Sch  "o ppner, Andrea  Wibbeke, Stefan  Turek, Hogenrich  Damanik, Rolf Mahnken, et al. “Self-Reinforced Thermoplastic Composites - Composite Materials (Part 2).” Kunststoffe International, 2014.
LibreCat: /record/28379

Caylak, Ismail, and Rolf Mahnken. “Stabilized Mixed Triangular Elements with Area Bubble Functions at Small and Large Deformations.”https://doi.org/10.1016/j.compstruc.2014.01.006__Computers &; Structures, 2014, 172–82.https://doi.org/10.1016/j.compstruc.2014.01.006 .
LibreCat: /record/19116
DOI: 10.1016/j.compstruc.2014.01.006

Hankeln, Frederik, and R. Mahnken. “A Mesoscopic Model for Deep Drawing of Carbon Fibre Prepregs at Large Strains.”https://doi.org/10.1016/j.compstruct.2013.05.009__Composite Structures, 2013, 340–50.https://doi.org/10.1016/j.compstruct.2013.05.009 .
LibreCat: /record/16237
DOI: 10.1016/j.compstruct.2013.05.009

Wibbeke, Andrea, Volker Schöeppner, and Rolf Mahnken. “Experimental Investigations on the Induced Anisotropy of Mechanical Properties in Polycarbonate Films.”https://doi.org/10.1155/2013/649043__ISRN Materials Science, 2013, 1–8.https://doi.org/10.1155/2013/649043 .
LibreCat: /record/24714
DOI: 10.1155/2013/649043

Mahnken, Rolf. “Parameter Identification in Continuum Mechanics: From Hand-Fitting to Stochastic Modelling.”https://doi.org/10.1007/978-3-642-39905-3_14__In The History of Theoretical, Material and Computational Mechanics - Mathematics Meets Mechanics and Engineering. Berlin, Heidelberg, 2013.https://doi.org/10.1007/978-3-642-39905-3_14 .
LibreCat: /record/24705
DOI: 10.1007/978-3-642-39905-3_14

Mahnken, Rolf, M. Wolff, and C. Cheng. “A Multi-Mechanism Model for Cutting Simulations Combining Visco-Plastic Asymmetry and Phase Transformation.”https://doi.org/10.1016/j.ijsolstr.2013.05.008__International Journal of Solids and Structures, 2013, 3045–66.https://doi.org/10.1016/j.ijsolstr.2013.05.008 .
LibreCat: /record/24717
DOI: 10.1016/j.ijsolstr.2013.05.008

Mahnken, Rolf, and E. Stein. “Finite Deformation Plasticity with Void Growth and Asymmetric Compression-Tension Behavior.”https://doi.org/10.1007/978-94-017-0297-3_14__In IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains. Dordrecht, 2013.https://doi.org/10.1007/978-94-017-0297-3_14 .
LibreCat: /record/28784
DOI: 10.1007/978-94-017-0297-3_14

Mahnken, Rolf. “Thermodynamic Consistent Modeling of Polymer Curing Coupled to Visco–Elasticity at Large Strains.”https://doi.org/10.1016/j.ijsolstr.2013.01.033__International Journal of Solids and Structures, 2013, 2003–21.https://doi.org/10.1016/j.ijsolstr.2013.01.033 .
LibreCat: /record/24718
DOI: 10.1016/j.ijsolstr.2013.01.033

Mahnken, Rolf. “Goal-Oriented Adaptive Refinement for Phase Field Modeling with Finite Elements.”https://doi.org/10.1002/nme.4464__International Journal for Numerical Methods in Engineering, 2013, 418–40.https://doi.org/10.1002/nme.4464 .
LibreCat: /record/24715
DOI: 10.1002/nme.4464

Mahnken, Rolf, and Christian Dammann. “Simulation of Strain-Induced Anisotropy for Polymers with Weighting Functions.”https://doi.org/10.1007/s00419-013-0780-3__Archive of Applied Mechanics, 2013, 21–41.https://doi.org/10.1007/s00419-013-0780-3 .
LibreCat: /record/24709
DOI: 10.1007/s00419-013-0780-3

Cheng, Chun, Rolf Mahnken, Eckart Uhlmann, and Ivan Mitkov Ivanov. “A Multi-Mechanism Model for Cutting Simulations Combining Visco-Plastic Asymmetry and Phase Transformation.”https://doi.org/10.1002/pamm.201310070__PAMM, 2013, 149–50.https://doi.org/10.1002/pamm.201310070 .
LibreCat: /record/24712
DOI: 10.1002/pamm.201310070

Sauerland, Kim-Henning. Phenomenological Process Simulation and Multiscale Tool Simulation Directed to a Hybrid Forming Process. Shaker, 2013.
LibreCat: /record/42184

Hankeln, Frederik, and Rolf Mahnken. “Carbon Fibre Prepregs: Simulation of a Thermo-Mechanical-Chemical Coupled Problem.”https://doi.org/10.1002/pamm.201210134__PAMM, 2012, 289–90.https://doi.org/10.1002/pamm.201210134 .
LibreCat: /record/16238
DOI: 10.1002/pamm.201210134

Widany, Kai-Uwe, and Rolf Mahnken. “Adaptivity for Parameter Identification of Incompressible Hyperelastic Materials Using Stabilized Tetrahedral Elements.”https://doi.org/10.1016/j.cma.2012.06.017__Computer Methods in Applied Mechanics and Engineering, 2012, 117–31.https://doi.org/10.1016/j.cma.2012.06.017 .
LibreCat: /record/24893
DOI: 10.1016/j.cma.2012.06.017

Mahnken, Rolf, M. Wolff, A. Schneidt, and M. Böhm. “Multi-Phase Transformations at Large Strains – Thermodynamic Framework and Simulation.”https://doi.org/10.1016/j.ijplas.2012.05.009__International Journal of Plasticity, 2012, 1–26.https://doi.org/10.1016/j.ijplas.2012.05.009 .
LibreCat: /record/24894
DOI: 10.1016/j.ijplas.2012.05.009

Nörenberg, Nicole, and Rolf Mahnken. “A Stochastic Model for Parameter Identification of Adhesive Materials.”https://doi.org/10.1007/s00419-012-0684-7__Archive of Applied Mechanics, 2012, 367–78.https://doi.org/10.1007/s00419-012-0684-7 .
LibreCat: /record/24716
DOI: 10.1007/s00419-012-0684-7

Mahnken, Rolf, and A. Shaban. “Finite Elasto-Viscoplastic Modeling of Polymers Including Asymmetric Effects.”https://doi.org/10.1007/s00419-012-0632-6__Archive of Applied Mechanics, 2012, 53–71.https://doi.org/10.1007/s00419-012-0632-6 .
LibreCat: /record/24713
DOI: 10.1007/s00419-012-0632-6

Widany, Kai-Uwe, and Rolf Mahnken. “Adaptive FEM with Stabilized Elements for Parameter Identification of Incompressible Hyperelastic Materials.”https://doi.org/10.1002/pamm.201210097__PAMM, 2012, 213–14.https://doi.org/10.1002/pamm.201210097 .
LibreCat: /record/24890
DOI: 10.1002/pamm.201210097

Nörenberg, Nicole, and Rolf Mahnken. “A Stochastic Model for the Direct and Inverse Problem of Adhesive Materials.”https://doi.org/10.1002/pamm.201210148__PAMM, 2012, 317–18.https://doi.org/10.1002/pamm.201210148 .
LibreCat: /record/24889
DOI: 10.1002/pamm.201210148

Schneidt, Andreas, Thomas Antretter, and Rolf Mahnken. “Micromechanical Modeling of Bainitic Phase Transformation.”https://doi.org/10.1002/pamm.201210159__PAMM, 2012, 341–42.https://doi.org/10.1002/pamm.201210159 .
LibreCat: /record/24891
DOI: 10.1002/pamm.201210159

Caylak, Ismail, and Rolf Mahnken. “Modeling of Induced Anisotropy at Large Deformations for Polymers.”https://doi.org/10.1002/pamm.201210149__PAMM, 2012, 319–20.https://doi.org/10.1002/pamm.201210149 .
LibreCat: /record/19132
DOI: 10.1002/pamm.201210149

Schmidt, Hans Christian, Ulf Damerow, Christian Lauter, Bernhard Gorny, Frederik Hankeln, Werner Homberg, Thomas Tröster, Hans Jürgen Maier, and Rolf Mahnken. “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.”https://doi.org/10.4028/www.scientific.net/kem.504-506.295__Key Engineering Materials, 2012, 295–300.https://doi.org/10.4028/www.scientific.net/kem.504-506.295 .
LibreCat: /record/15984
DOI: 10.4028/www.scientific.net/kem.504-506.295

Gorny, B., Frederik Hankeln, Christian Lauter, H. C. Schmidt, U. Damerow, Rolf Mahnken, H. J. Maier, Thomas Tröster, and Werner Homberg. “Simulation and Manufacturing of Deep Drawn Parts Reinforced by Carbon Fibre Prepregs,” 2012.
LibreCat: /record/15986

Caylak, Ismail. Stabilized Mixed Triangular and Tetrahedral Finite Elements with Volume and Area Bubble Functions. Vol. Band 4. Schriften Des Lehrstuhls Für Technische Mechanik. Shaker, 2011.
LibreCat: /record/19187

Hankeln, Frederik, and Rolf Mahnken. “Simulation of Deep Drawing of Carbon Fibre Prepregs.”https://doi.org/10.1002/pamm.201110181__PAMM, 2011, 379–80.https://doi.org/10.1002/pamm.201110181 .
LibreCat: /record/16239
DOI: 10.1002/pamm.201110181

Wolff, Michael, Michael Böhm, Rolf Mahnken, and Bettina Suhr. “Implementation of an Algorithm for General Material Behavior of Steel Taking Interaction between Plasticity and Transformation-Induced Plasticity into Account.”https://doi.org/10.1002/nme.3154__International Journal for Numerical Methods in Engineering, 2011, 1183–1206.https://doi.org/10.1002/nme.3154 .
LibreCat: /record/25087
DOI: 10.1002/nme.3154

Mahnken, Rolf, and Stefan Wilmanns. “A Projected Newton Algorithm for Simulation of Multi-Variant Textured Polycrystalline Shape Memory Alloys.”https://doi.org/10.1016/j.commatsci.2011.03.010__Computational Materials Science, 2011, 2535–48.https://doi.org/10.1016/j.commatsci.2011.03.010 .
LibreCat: /record/25089
DOI: 10.1016/j.commatsci.2011.03.010

Loboda, V., and Rolf Mahnken. “An Investigation of an Electrode at the Interface of a Piezoelectric Bimaterial Space under Remote Electromechanical Loading.”https://doi.org/10.1007/s00707-011-0519-6__Acta Mechanica, 2011, 327–39.https://doi.org/10.1007/s00707-011-0519-6 .
LibreCat: /record/25086
DOI: 10.1007/s00707-011-0519-6

Mahnken, Rolf. “Simulation of Strength Difference Coupled to Softening in Elasto-Plasticity for Adhesive Materials.”https://doi.org/10.1016/j.ijadhadh.2011.08.006__International Journal of Adhesion and Adhesives, 2011, 1–14.https://doi.org/10.1016/j.ijadhadh.2011.08.006 .
LibreCat: /record/24892
DOI: 10.1016/j.ijadhadh.2011.08.006

Mahnken, Rolf, A. Schneidt, S. Tschumak, and H.J. Maier. “On the Simulation of Austenite to Bainite Phase Transformation.”https://doi.org/10.1016/j.commatsci.2010.12.032__Computational Materials Science, 2011, 1823–29.https://doi.org/10.1016/j.commatsci.2010.12.032 .
LibreCat: /record/25085
DOI: 10.1016/j.commatsci.2010.12.032

Caylak, Ismail, and Rolf Mahnken. “Mixed Finite Element Formulations with Volume Bubble Functions for Triangular Elements.”https://doi.org/10.1016/j.compstruc.2011.07.004__Computers &; Structures, 2011, 1844–51.https://doi.org/10.1016/j.compstruc.2011.07.004 .
LibreCat: /record/25088
DOI: 10.1016/j.compstruc.2011.07.004

Sauerland, Kim-Henning, and Rolf Mahnken. “Meso-Macro Modelling of Coated Forming Tools under Thermal Shock Conditions.”https://doi.org/10.1002/pamm.201110265__PAMM, 2011, 551–52.https://doi.org/10.1002/pamm.201110265 .
LibreCat: /record/25081
DOI: 10.1002/pamm.201110265

Widany, Kai-Uwe, and Rolf Mahnken. “An Error Indicator for Parameter Identification with Stabilized Mixed Tetrahedrals.”https://doi.org/10.1002/pamm.201110141__PAMM, 2011, 299–300.https://doi.org/10.1002/pamm.201110141 .
LibreCat: /record/24895
DOI: 10.1002/pamm.201110141

Mahnken, Rolf. Lehrbuch Der Technischen Mechanik - Statik. Berlin, Heidelberg, 2011.https://doi.org/10.1007/978-3-642-21711-1 .
LibreCat: /record/29116
DOI: 10.1007/978-3-642-21711-1

Caylak, Ismail, Rolf Mahnken, and Kai-Uwe Widany. “Stabilized Mixed Triangular Finite Elements at Large Deformations Using Area Bubble Functions.”https://doi.org/10.1002/pamm.201110092__PAMM, 2011, 201–2.https://doi.org/10.1002/pamm.201110092 .
LibreCat: /record/19129
DOI: 10.1002/pamm.201110092

Mahnken, Rolf, and Ismail Caylak. “Optical Measurements for a Cold-Box Sand and Aspects of Direct and Inverse Problems for Micropolar Elasto-Plasticity.”https://doi.org/10.1007/978-3-642-22738-7_9__In Advances in Extended and Multifield Theories for Continua. Berlin, Heidelberg, 2011.https://doi.org/10.1007/978-3-642-22738-7_9 .
LibreCat: /record/19133
DOI: 10.1007/978-3-642-22738-7_9

Caylak, Ismail, and Rolf Mahnken. “Stabilization of Mixed Tetrahedral Elements at Large Deformations.”https://doi.org/10.1002/nme.3320__International Journal for Numerical Methods in Engineering, 2011, 218–42.https://doi.org/10.1002/nme.3320 .
LibreCat: /record/19113
DOI: 10.1002/nme.3320

Mahnken, Rolf. Lehrbuch Der Technischen Mechanik - Dynamik. Berlin, Heidelberg, 2011.https://doi.org/10.1007/978-3-642-19838-0 .
LibreCat: /record/19328
DOI: 10.1007/978-3-642-19838-0

Mahnken, Rolf, and P. Steinmann. “Parameter Identification of Constitutive Models for Fluidsaturated Porous Media within an FE-Setting.”https://doi.org/10.1002/zamm.20000801341__ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift Für Angewandte Mathematik Und Mechanik 80, no.https://doi.org/10.1002/zamm.20000801341__(2011): 161–64.https://doi.org/10.1002/zamm.20000801341 .
LibreCat: /record/45420
DOI: 10.1002/zamm.20000801341

Döbert, C., Rolf Mahnken, and E. Stein. “Numerical Simulation of Interface Debonding during Fibre Pull-Out Tests.”https://doi.org/10.1002/zamm.200008014105__ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift Für Angewandte Mathematik Und Mechanik 80, no.https://doi.org/10.1002/zamm.200008014105__(2011): 467–68.https://doi.org/10.1002/zamm.200008014105 .
LibreCat: /record/45421
DOI: 10.1002/zamm.200008014105

Mahnken, Rolf. “Improvements for Finite-Element Implementation of the Gurson Model.”https://doi.org/10.1002/zamm.200008014112__ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift Für Angewandte Mathematik Und Mechanik 80, no.https://doi.org/10.1002/zamm.200008014112__(2011): 481–82.https://doi.org/10.1002/zamm.200008014112 .
LibreCat: /record/45419
DOI: 10.1002/zamm.200008014112