Wituschek, S., &; Lechner, M. (2021). Friction Characterisation for a Tumbling Self-Piercing Riveting Process. Key Engineering Materials, 883, 27–34.https://doi.org/10.4028/www.scientific.net/kem.883.27 
LibreCat: /record/30719
DOI: 10.4028/www.scientific.net/kem.883.27

Haddenhorst, B., Bengs, V., &; Hüllermeier, E. (2021). Identification of the Generalized Condorcet Winner in Multi-dueling Bandits. In A. Beygelzimer, Y. Dauphin, P. Liang, &; J. W. Vaughan (Eds.), Advances in Neural Information Processing Systems.
LibreCat: /record/30723

Peckhaus, V. (2021). Technikphilosophie. In Staatslexikon. Recht, Wirtschaft, Gesellschaft, Bd. 5: Schule - Virtuelle Realität (8. völlig neu bearbeitete Aufl., pp. 983-991 (Spalten)). Herder Verlag.
LibreCat: /record/17751

Redder, A., Ramaswamy, A., &; Karl, H. (2021). Practical sufficient conditions for convergence of distributed   optimisation algorithms over communication networks with interference. In arXiv:2105.04230.
LibreCat: /record/30792
arXiv: 2105.04230

Damke, C., &; Hüllermeier, E. (2021). Ranking Structured Objects with Graph Neural Networks. In C. Soares &; L. Torgo (Eds.), Proceedings of The 24th International Conference on Discovery Science (DS 2021) (Vol. 12986, pp. 166–180). Springer.https://doi.org/10.1007/978-3-030-88942-5 
LibreCat: /record/27381
DOI: 10.1007/978-3-030-88942-5
arXiv: 2104.08869

Tornede, T., Tornede, A., Hanselle, J. M., Wever, M. D., Mohr, F., &; Hüllermeier, E. (2021). Towards Green Automated Machine Learning: Status Quo and Future Directions. In arXiv:2111.05850.
LibreCat: /record/30866
arXiv: 2111.05850

Schulz, A., Wecker, C., Inguva, V., Lopatin, A. S., &; Kenig, E. Y. (2021). A PLIC-based method for species mass transfer at free fluid interfaces. Chemical Engineering Science, 251, Article 117357.https://doi.org/10.1016/j.ces.2021.117357 
LibreCat: /record/30864
DOI: 10.1016/j.ces.2021.117357

Wever, M. D. (2021). Automated Machine Learning for Multi-Label Classification.https://doi.org/10.17619/UNIPB/1-1302 
LibreCat: /record/27284
DOI: 10.17619/UNIPB/1-1302

Boschmann, A., Neuhaus, D., Vogt, S., Kaltschmidt, C., Platzner, M., &; Dosen, S. (2021). Immersive augmented reality system for the training of pattern classification control with a myoelectric prosthesis. Journal of NeuroEngineering and Rehabilitation, 18(1), Article 25.https://doi.org/10.1186/s12984-021-00822-6 
LibreCat: /record/30906
DOI: 10.1186/s12984-021-00822-6

Rodriguez, A., Otero, A., Platzner, M., &; De la Torre, E. (2021). Exploiting Hardware-Based Data-Parallel and Multithreading Models for Smart Edge Computing in Reconfigurable FPGAs. IEEE Transactions on Computers, 1–1.https://doi.org/10.1109/tc.2021.3107196 
LibreCat: /record/30907
DOI: 10.1109/tc.2021.3107196

Moritzer, E., &; Richters, M. (2021). Injection Molding of Wood-Filled Thermoplastic Polyurethane. Journal of Composites Science, 5(12), Article 316.https://doi.org/10.3390/jcs5120316 
LibreCat: /record/30924
DOI: 10.3390/jcs5120316

Moritzer, E., &; Richters, M. (2021). Characterization of wood-filled thermoplastic polyurethane for the injection modling process. Journal of Applied Polymer Science.
LibreCat: /record/23944

Moritzer, E., Richters, M., Hillemeyer, J., &; Krassmann, D. (2021). Mit dem Schraubblind-Durchsetznieten Metallteile mit Composites bei einseitiger Zugänglichkeit verbinden. Joining Plastics.
LibreCat: /record/23948

Kastein, M., Finke, J., &; Horwath, I. (2021). Florian braucht Mehmet mehr als umgekehrt: Herausforderungen und Potenziale für Inklusion in der Freiwilligen Feuerwehr. Voluntaris, 135–151.https://doi.org/10.5771/2196-3886-2021-1-135 
LibreCat: /record/23886
DOI: 10.5771/2196-3886-2021-1-135

Ohne den aWeissen Mann8 würden Leute wie Sie noch in Erdhöhlen wohnen.“- Die Markierung der Unmarkierten. (2021). In M. Kastein, I. Horwath, J. Finke, &; N. Duglar Sezer (Eds.), Erscheinungsformen, Erklärungsversuche und Gegenstrategien, GENDER  (pp. 923107).https://doi.org/doi.org/10.3224/84742528.01 
LibreCat: /record/24446
DOI: doi.org/10.3224/84742528.01

Horwath, I., Kastein, M., &; Duglar Sezer, N. (2021). Feuerwehren im Spiegel gesellschaftlicher Diversität. In N. Duglar Sezer, I. Horwath, &; M. Kastein (Eds.), Feuerwehren im Spiegel gesellschaftlicher Diversität.
LibreCat: /record/24477

Kastein, M. (2021). Das schwankende Schiff der Männerpolitik: eine Metaphernanalyse. https://doi.org/10.17169/FQS-22.2.3597__Forum Qualitative Sozialforschung.https://doi.org/10.17169/FQS-22.2.3597 
LibreCat: /record/24172
DOI: 10.17169/FQS-22.2.3597

International Perspectives about COVID-19, Digital Labour and Gender Work Pattern: A Collective Interview. (2021). Inhttps://doi.org/10.13060/gav.2020.014__v. A. Alemann, J. Gruhlich, I. Horwath, &; L. Weber (Eds.), Gender a výzkum / Gender and Research (pp. 86–102).https://doi.org/10.13060/gav.2020.014 
LibreCat: /record/24175
DOI: 10.13060/gav.2020.014

A Plea to Reflect on the Entanglements of Gendered Work Patterns and Digital Technologies. (2021). Inhttps://doi.org/10.13060/gav.2020.009__v. A. Alemann, J. Gruhlich, I. Horwath, &; L. Weber (Eds.), Gender a výzkum / Gender and Research (pp. 3–12).https://doi.org/10.13060/gav.2020.009 
LibreCat: /record/24173
DOI: 10.13060/gav.2020.009

Otroshi, M., Meschut, G., &; Nesakumar, A. (2021). The influence of manufacturing processes and optical measurement methods on the damage behavior of LAD micro-alloyed steels. Journal of Manufacturing Engineering, 16(3), 70–76.https://doi.org/10.37255/jme.v16i3pp070-076 
LibreCat: /record/25476
DOI: https://doi.org/10.37255/jme.v16i3pp070-076

Moritzer, E., Hirsch, A., &; Dalmer, C. (2021). Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability (pp. 112–129). Springer.https://doi.org/10.1007/978-3-030-54334-1 
LibreCat: /record/22032
DOI: 10.1007/978-3-030-54334-1

Moritzer, E., Wächter, J., &; Elsner, C. L. (2021). Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK. Macromolecular Symposia, 395(1).https://doi.org/10.1002/masy.202000269 
LibreCat: /record/24162
DOI: 10.1002/masy.202000269

Moritzer, E., &; Schumacher, C. (2021). Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting. Macromolecular Symposia, 395(1), Article 2000275.https://doi.org/10.1002/masy.202000275 
LibreCat: /record/24681
DOI: 10.1002/masy.202000275

Otroshi, M., Meschut, G., Bielak, C. R., Masendorf, L., &; Esderts, A. (2021). Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components. Key Engineering Materials, 883, 35–40.https://doi.org/10.4028/www.scientific.net/KEM.883.35 
LibreCat: /record/21810
DOI: https://doi.org/10.4028/www.scientific.net/KEM.883.35

Moritzer, E., Elsner, C. L., Wächter, J., &; Knoop, F. (2021). Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems. 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC).
LibreCat: /record/24554

Bialaschik, M., Schöppner, V., Albrecht, M., &; Gehde, M. (2021). Influence of material degradation on weld seam quality in hot gas butt welding of polyamides. Welding in the World, 1161–1169.https://doi.org/10.1007/s40194-021-01108-0 
LibreCat: /record/23867
DOI: 10.1007/s40194-021-01108-0

Moritzer, E., Elsner, C. L., &; Schumacher, C. (2021). Investigation of MetalPolymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters. Polymer Composites, 42(11), 6065–6079.https://doi.org/10.1002/pc.26285 
LibreCat: /record/24555
DOI: 10.1002/pc.26285

Wibbeke, T. M., Bartley, A., Chudalla, N., &; Meschut, G. (2021). Fügen und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise. Fahrzeug + Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie- Und Schadenstagen 22./23. Oktober 2021.
LibreCat: /record/26821

Gröger, B., Troschitz, J., Vorderbrüggen, J., Vogel, C., Kupfer, R., Meschut, G., &; Gude, M. (2021). Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies. Materials.https://doi.org/ 10.3390/ma14092286 
LibreCat: /record/21814
DOI: https://doi.org/ 10.3390/ma14092286

Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut, G., &; Gude, M. (2021). Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering.https://doi.org/10.1007/s11740-021-01091-x 
LibreCat: /record/28568
DOI: 10.1007/s11740-021-01091-x

Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., &; Niendorf, T. (2021). Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components. Metals, Article 335.https://doi.org/10.3390/met11020335 
LibreCat: /record/24131
DOI: 10.3390/met11020335

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2021). The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis. Metals, Article 156.https://doi.org/10.3390/met11010156 
LibreCat: /record/21064
DOI: 10.3390/met11010156

Magnier, A., Wu, T., Tinkloh, S. R., Tröster, T., Scholtes, B., &; Niendorf, T. (2021). On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites. Polymer Testing, Article 107146.https://doi.org/10.1016/j.polymertesting.2021.107146 
LibreCat: /record/24130
DOI: 10.1016/j.polymertesting.2021.107146

Henkenius, C. (2021). Entwurf netzfreundlicher Synchrongleichrichter mit integriertem Synchronwandler.https://doi.org/10.17619/UNIPB/1-1109 
LibreCat: /record/30849
DOI: 10.17619/UNIPB/1-1109

Claes, L., Chatwell, R. S., Baumhögger, E., Hetkämper, T., Zeipert, H., Vrabec, J., &; Henning, B. (2021). Measurement procedure for acoustic absorption and bulk viscosity of liquids. Measurement, Article 109919.https://doi.org/10.1016/j.measurement.2021.109919 
LibreCat: /record/22925
DOI: 10.1016/j.measurement.2021.109919

Kirchhoff, J., Burmeister, S. C., Weskamp, C., &; Engels, G. (2021). Towards a Decision Support System for Cross-Sectoral Energy Distribution Network Planning. In M. H. Breitner, S. Lehnhoff, A. Nieße, P. Staudt, C. Weinhardt, &; O. Werth (Eds.), Energy Informatics and Electro Mobility ICT.
LibreCat: /record/21093

Lammer, C. (2021). Revolten in Gelb und Grün. In “Rosa und Hannah. Das Blatt wenden” inspiriert Joke J. Hermsen für Krisenzeiten.
LibreCat: /record/30957

Moritzer, E., Hillemeyer, J., Kramer, M., &; Hopmann, C. (2021). Designing of thermosetting plastic components  for direct screwing - Auslegung von Duroplastbauteilen zur Direktverschraubung. Joining Plastics, 94–103.
LibreCat: /record/31744

Moritzer, E., &; Richters, M. (2021).  Characterization of wood-filled thermoplastic polyurethanes for the  injection molding process. Journal of Applied Polymer Science, 138(38).
LibreCat: /record/31740

Moritzer, E., Krassmann, D., &; Brikmann, J. (2021). Entwicklung der Spritzniettechnik als  werkstoffgerechtes Fügeverfahren für hybride Strukturen. 11. Fügetechnisches  Gemeinschaftskolloquium. 11. Fügetechnisches  Gemeinschaftskolloquium, Dresden.
LibreCat: /record/31760

Moritzer, E., Jilg, J., &; Rücker, T. (2021). Er kommt auf die Korngröße an, Mikrogranulat verbessert die  Verteilung feindisperser Füllstoffe in der Direktcompoundierung. Kunststoffe, 24–27.
LibreCat: /record/31762

Schöppner, V., &; Martens, J. H. (2021). Eine runde Sache. Kunststoffe, 91–93.
LibreCat: /record/31758

Hopp, M., &; Tölle, L. (2021). Influence of Fiber Content on the Fiber Dust Formation During Shredding for  Mechanical Recycling of Different Glass and Carbon Fiber Reinforced Thermoplastics. 36th  International Conference of Polymer Processing Society (PPS). 36th  International Conference of Polymer Processing Society (PPS).
LibreCat: /record/31767

Moritzer, E., Hillemeyer, J., &; Lotzin, R. (2021). Fügeelement angespritzt - Einfluss auf die Verbundfestigkeit  zwischen Organoblech und Schraubblindniet untersucht. Kunststoffe, 42–45.
LibreCat: /record/31765

Moritzer, E., Wortmann, M., Krieger, P., Husgen, B., &; Frese, N. (2021). Effect of Isocyanate Absorption on the  Mechanical Properties of Silicone Elastomers in Polyurethane Vacuum Casting. ACS Omega.
LibreCat: /record/31763

Moritzer, E., Wächter, J., &; Fuhrmann, C. (2021).  INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR. 23rd International Conference Materials, 58–67.
LibreCat: /record/31774

Schöppner, V., &; Gevers, K. (2021).  Lebensdauer vorhersagen? K-Zeitung.
LibreCat: /record/31776

Moritzer, E. (2021).  Kühlen mit dem Wärmerohr. Kunststoffe, 64–67.
LibreCat: /record/31775

Schöppner, V., Altepeter, M., &; Wanke, S. (2021). Material Degradation of Polypropylene on the Co-Rotating  Twin Screw Extruder. 36th International Conference of the Polymer Processing Society (PPS). 36th International Conference of the Polymer Processing Society (PPS), Melbourne (Kanada).
LibreCat: /record/31777

Willeke, S. (2021). Schriftstellerische Inszenierungspraktiken und autofiktionale Schreibreflexionen im Weblog Turmsegler von Benjamin Stein. In C. Gansel, K. Lehnen , &; V. Oswalt (Eds.), Schreiben, Text, Autorschaft II. Zur Narration und Störung von Lebens- und Schreibprozessen (pp. 131–158). V&;R unipress .
LibreCat: /record/31718