Teng Z, Wu H, Pramanik S, et al. Characterization and Analysis of Plastic Instability in an UltrafineGrained Medium Mn TRIP Steel. Advanced Engineering Materials. 2022;24(9). doi:10.1002/adem.202200022

Huang J, Gonzalez Orive A, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200. doi:10.1016/j.corsci.2022.110186

Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. Advanced Engineering Materials. Published online 2022. doi:10.1002/adem.202201008

Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications. Materials Science and Engineering: A. 2022;854. doi:10.1016/j.msea.2022.143887

Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study. Crystals. 2022;12(9). doi:10.3390/cryst12091217

Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. Materials. 2022;15(12). doi:10.3390/ma15124072

Hein M, Lopes Dias NF, Kokalj D, et al. On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy. International Journal of Fatigue. 2022;166. doi:10.1016/j.ijfatigue.2022.107235

Sundermeier S, Passmann M, aus der Wiesche S, Kenig EY. Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers. International Journal of Turbomachinery, Propulsion and Power. 2022;7(2). doi:10.3390/ijtpp7020012

Kenig EY. State-of-the-Art Modeling of Separation Columns: A Review. Chemical Engineering Transactions. 2022;94:325-330.

Hami Dindar I, Baumhögger E, Lutters N, Kenig E. Wässrige Aminozuckerlösungen als neue Lösungsmittel zur CO2-Abscheidung. In: Jahrestreffen Der ProcessNet Fachgruppen Fluidverfahrenstechnik Und Hochdruckverfahrenstechnik. ; 2022.

Mamedov T, Schleicher E, Schubert M, Ehlert T, Kenig EY, Hampel U. Flow Morphology of TEG Desiccant in a Structured Packing Air Dehumidifier Exposed to Floating Conditions. In: Proceedings of the 12th International Conference Distillation &; Absorption 2022. ; 2022.

Haase M, Zimmer D. Systematic Investigations Concerning Eddy Currents in Additively Manufactured Structures. In: Innovative Product Development by Additive Manufacturing 2021. Springer International Publishing; 2022. doi:10.1007/978-3-031-05918-6_10

Behler F. He’d seen it in the words of Owen and Brooke’: Toward a Renaissance of Soldier Poetry in Twenty-First Century Britain. In: ESSE Conference 2022. Seminar: British and Irish Poetry after the Turn of the Millennium: Trends, Public/Counterpublic, Institutions. Organisation: Professor David Malcomb (University of Gdansk), Wolfgang Görtschacher (University of Salzburg). ; 2022.

Behler F. Configuring the War-Zone: Battlefields as Markers of Glory and Catastrophe in Modern and Contemporary British Literature. In: Artistic Practices of (Un-)Making Place. Organisation: Professor Mihaela Irimia (University of Bukarest), Univ. Professor Christoph Singer (University of Innsbruck), Professor Christoph Ehland (University of Paderborn). ; 2022.

Behler F. The Iraq and Afghanistan War Memorial - A Landmark Shift in British Memory Culture. In: BRITCULT 2022: British Identities Medialised. Organisation: Univ. Professor Dorothea Flothow, Dr. Sarah Herbe, Assoz. Professor Markus Oppolzer, Dr. Elizabeth Schober (Paris Lodron Universität Salzburg). ; 2022.

Behler F. Inventing a New Landscape: The Literature(s) of Gardening in 18th-Century-England. In: MLA Convention 2022. Session: Architectural Spaces and the Constitution of Authority in Early Modern European Literature. Organisation: Professor Katherine Brown (Albright College Pennsylvania). ; 2022.

Behler F. Recapturing ‘Old England’ – Nostalgia, Aristo-Anglophilia, and the Transnational Impact of ITV’s ‘Downton Abbey’. In: Identity and Otherness in Film. Organisation: London Centre for Interdisciplinary Research. ; 2022.

Rossel MS, Meschut G. Increasing the accuracy of clinching process simulations by modeling the friction as a function of local joining process parameters. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221074290

Kusoglu IM, Vieth P, Heiland S, et al. Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts. Procedia CIRP. 2022;111:10-13. doi:10.1016/j.procir.2022.08.046

Sander S, Meschut G, Kroll U, Matzenmiller A. Methodology for the systematic investigation of the hygrothermal-mechanical behavior of a structural epoxy adhesive. International Journal of Adhesion and Adhesives. Published online 2022. doi:10.1016/j.ijadhadh.2021.103072

Kuball C-M, Uhe B, Meschut G, Merklein M. Process-adapted temperature application within a two-stage rivet forming process for high nitrogen steel. Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications. Published online 2022:1-17. doi:10.1177/14644207211068693

Inguva V, Schulz A, Kenig E. On methods to reduce spurious currents within VOF solver frameworks. Part 1: a review of the static bubble/droplet. Chemical Product and Process Modeling. 2022;17:121-135.

Wende M, Staggenborg C, Kenig EY. Modelling and simulation of zero-gravity distillation units with metal foams. Chemical Engineering Science. 2022;247. doi:10.1016/j.ces.2021.117097

Bothe M, Lutters N, Kenig EY. Model Based and Experimental Analysis of the Dynamic Reactive Absorption Loop Behavior. In: Proceedings of the 12th International Conference Distillation &; Absorption 2022. ; 2022.

Kenig EY. Modeling Concepts for Reactive Separations. In: Skiborowski M, Górak A, eds. Process Intensification by Reactive and Membrane-Assisted Separations. 2nd ed. De Gruyter; 2022. doi:10.1515/9783110720464

Uhe B, Meschut G. Lösungsstrategien für das Halbhohlstanznieten von höchstfesten und ultrahöchstfesten Stählen mit Aluminiumwerkstoffen. FOSTA, EFB, DVS, ed. Published online 2022.

Wu T, Kruse R, Tinkloh SR, et al. Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects. Journal of Composites Science. 2022;6(5). doi:10.3390/jcs6050138

Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221093468

Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z

Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100133

Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100134

Wu T, Degener S, Tinkloh SR, et al. Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction. Composite Structures. Published online 2022. doi:10.1016/j.compstruct.2022.116071

Wende M, Kenig EY. Modeling of a hybrid process combining zero-gravity distillation and vapor permeation. In: Proceedings Int. Conf. eDistillation and Absorption 2022”. ; 2022.

Martin S, Bielak CR, Bobbert M, Tröster T, Meschut G. Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01103-w

Tittmann K, Koch I, Çavdar S, Gude M, Meschut G. Service strength analysis method for adhesively bonded hybrid structures under multiaxial loading. In: Ecole Polytechnique Fédérale de Lausanne (EPFL), ed. Proceedings of the 20th European Conference on Composite Materials. Vol 2. ; 2022:730-739.

Martin S, Kurtusic K, Tröster T. Influence of the Surrounding Sheet Geometry on a Clinched Joint. Key Engineering Materials. 2022;927. doi:Â  https://doi.org/10.4028/p-09md1c

Bertling R, Hack M, Ausner I, Horschitz B, Bernemann SA, Kenig E. Modelling film and rivulet flows on microstructured surfaces using CFD methods. Chemical Engineering Science. 2022;251. doi:10.1016/j.ces.2021.117414

Bertling R, Hack M, Ausner I, Horschitz B, Bernemann S, Kenig EY. Modelling film and rivulet flows on microstructured surfaces using CFD methods. Chemical Engineering Science. 2022;251. doi:10.1016/j.ces.2021.117414

Brüning F, Schöppner V. Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders. Polymers 14. Published online 2022. doi:https://doi.org/10.3390/polym14020256

Schöppner V, Gevers K, Tornede A, Wever M, Hüllermeier E. A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials. Welding in the World. Published online 2022:14.

Moritzer E, Held C, Hillemeyer J. Material-specific prediction of the optimal joinig parameters for the screw blind rivet joining process. Welding in the World. Published online 2022.

Rozo Vasquez J, Kanagarajah H, Arian B, et al. Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming. Practical Metallography. 2022;59(11):660-675. doi:10.1515/pm-2022-0064

Kersting L, Arian B, Vasquez JR, Trächtler A, Homberg W, Walther F. Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes. Key Engineering Materials. 2022;926:862-874. doi:10.4028/p-yp2hj3

Rozo Vasquez J, Walther F, Arian B, Homberg W, Kersting L, Trächtler A. Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel. In: Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing. ; 2022.

Kersting L, Trächtler A, Arian B, Homberg W, Rozo Vasquez J, Walther F. Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile. Diedrich; 2022.

Hein M. Influence of Physical Vapor Deposition on High-Cycle Fatigue Performance of Additively Manufactured Ti-6Al-7Nb Alloy. Crystals. Published online 2022. doi:10.3390/cryst12091190

Ahmed M. Knowledge Base Enhanced &; User-Centric Dialogue Design for OTF Computing.; 2022.

Schön O, Götte R-S, Timmermann J. Multi-Objective Physics-Guided Recurrent Neural Networks for Identifying Non-Autonomous Dynamical Systems. In: 14th IFAC Workshop on Adaptive and Learning Control Systems (ALCOS 2022). Vol 55. ; 2022:19-24. doi:https://doi.org/10.1016/j.ifacol.2022.07.282

Stallmeister T, Tröster T. In-Mold-Assembly of Hybrid Bending Structures by Compression Molding. Key Engineering Materials. 2022;926:1457-1467. doi:10.4028/p-5fxp53

Finke J, Horwath I, Matzner T, Schulz C. (De)Coding Social Practice in the Field of XAI: Towards a Co-constructive Framework of Explanations and Understanding Between Lay Users and Algorithmic Systems. In: Artificial Intelligence in HCI. Springer International Publishing; 2022:149-160. doi:10.1007/978-3-031-05643-7_10