V. Schöppner, L. Austermeier, and K. Dietl, “SKZ simuliert Doppelschnecke,” K Zeitung, 2020.

A. Ramaswamy, “DSPG: Decentralized Simultaneous Perturbations Gradient Descent Scheme,” in 2020 28th Euromicro International Conference on Parallel, Distributed and Network-Based Processing (PDP), 2020, pp. 54–62.

S. H. Heid, A. Ramaswamy, and E. Hüllermeier, “Constrained Multi-Agent Optimization with Unbounded Information Delay,” in Proceedings-30. Workshop Computational Intelligence: Berlin, 26.-27. November 2020, 2020, vol. 26, p. 247.

A. Ramaswamy, S. Bhatnagar, and D. E. Quevedo, “Asynchronous stochastic approximations with asymptotically biased errors and deep multi-agent learning,” IEEE Transactions on Automatic Control, 2020.

M. Haist et al., “Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries,”10.1617/s11527-020-01477-w__Materials and Structures, 2020, doi:10.1617/s11527-020-01477-w .

E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, and J. Mirasol, “Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent,” JOURNAL OF INDUSTRIAL TEXTILES, no. 50, pp. 224–239, 2020.

E. Moritzer, F. M. Mühlhoff, E. Krampe, and E. Lochbaum, “K-Haftverbunde aus originär inkompatiblen Kunststoffen,” Plastverarbeiter, no. 07/20, pp. 20–23, 2020.

E. Moritzer, S. Kartelmeyer, and V. Hüttemann, “Additive Manufactured Heat Pipe Injection Mould Element,” presented at the Direct Digital Manufacturing Conference 2020, Berlin, 2020.

E. Moritzer and J. Hillemeyer, “Additiveteile Direktverschrauben,” presented at the 6. Fachkonferenz 3D-Druck in der Automobielindustrie, Hamburg, 2020.

V. Schöppner, M. Dörner, and C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION. 2020.

E. Moritzer and J. Hillemeyer, “Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben,” presented at the 10. Gemeinschaftskolloquium, WebKolloquium (Deutschland), 2020.

V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, and G. Steinbichler, “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion),” Polymers, no. 12(9), p. 1900, 2020.

E. Moritzer and M. Wittke, “CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, Digital, 2020.

E. Moritzer and D. Krassmann, “Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics,” presented at the 73rd Annual Assembly of the International Institute of Welding (IIW), Online, 2020.

V. Schöppner, M. Dörner, C. Marschik, and G. Steinbichler, “Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws,” Polymers, p. 946, 2020.

E. Moritzer, J. Jilg, C. Schilp, N. Krempl, and W. Friesenbichler, “Die Kunst der Entformung,” Kunststoffe, pp. 60–63, 2020.

E. Moritzer, M. Hopp, and M. Wittke, “EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG,” WAK Jahreszeitschrift, pp. 2–5, 2020.

E. Moritzer and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” Joining Plastics, pp. 96–103, 2020.

E. Moritzer, D. Krassmann, and J. Brikmann, “Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen,” presented at the 10. Fügetechnisches Gemeinschaftskolloquium, 2020.

E. Moritzer, S. Kartelmeyer, M. Hüttemann, and C. Jaroschek, “INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT,” presented at the 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA), 2020.

E. Moritzer and F. M. Mühlhoff, “Inline Surface Activation in the multi Injection Molding Process,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, Digital, 2020.

E. Moritzer, F. M. Mühlhoff, E. Lochbaum, and E. Krampe, “InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen,” KGK - Rubberpoint, pp. 22–26, 2020.

D. B. Rasche, L. Tigges, and H.-J. Schmid, “An apparatus to synthesize ceramic nanoparticles with a precisely adjusted temperature history and a significant mass output,”10.1063/1.5133438__Review of Scientific Instruments, Art. no. 055104, 2020, doi:10.1063/1.5133438 .

D. B. Rasche, L. Tigges, and H.-J. Schmid, “An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output,”10.1063/1.5133438__Review of Scientific Instruments, vol. 91, p. 055104, 2020, doi:10.1063/1.5133438 .

E. Moritzer, A. Hirsch, and C. Dalmer, “Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability,” in Additive Manufacturing in Products and Applications (AMPA), Zurich (Switzerland), 2020, pp. 112–129.

E. Moritzer, F. M. Mühlhoff, and E. Krampe, “Kostensenkung beim Mehrkomponenten-Spritzgießen,” Kunststoff + Verarbeitung, no. 5, pp. 92–93, 2020.

E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Mehr Materialkombinationen, weniger Kosten,” Kunststoffe, pp. 39–42, 2020.

E. Moritzer and M. Wittke, “Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite,” MNWP Magazin, pp. 26–27, 2020.

E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “More Material Combinations, Lower Costs,” Kunststoffe international, pp. 22–25, 2020.

E. Moritzer and D. Krassmann, “Neuartige Fügetechnik für Organoblech-Hybridverbindungen,” presented at the DVS Congress 2020, Online, 2020.

E. Moritzer and M. Wittke, “Neue Maßstäbe in puncto Festigkeit und Faserlänge,” Plastverarbeiter, pp. 18–21, 2020.

E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Plasma technology rationalizes 2-component processes,” adhesion ADHESIVES + SEALANTS, 2020.

E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Plasma-Technologie zur Rationalisierung von 2K-Prozessen,” adhäsion KLEBEN &; DICHTEN, no. 10, pp. 16–19, 2020.

E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neue Organoblech-Metall-Hybridfügetechnik. 2020.

E. Moritzer and C. Schumacher, “Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting,” presented at the 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien), 2020.

S. Vogtschmidt, I. Fiebig, and V. Schöppner, “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien,” Joining Plastics, no. 3–4, 2020.

H. Malatyali, V. Schöppner, A. Behrendt, T. Hoemann, F. Sporkmann, and F. Hanselle, “Differences between the recycled carbon fibers especially regarding the product quality, ,” 2020.

S. Vogtschmidt and V. Schöppner, “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien,” in DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 2020, vol. 365.

S. Vogtschmidt and V. Schöppner, “Vibration welding of components with angled areas in the direction of vibration,” Welding in the World, vol. 64, pp. 1843–1853, 2020.

S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, no. 3–4, 2020.

B. Krebs, “Antecedents and Performance Consequences of High-Potential Scheme Use,” in Academy of Management Proceedings, 2020, vol. 1, no. 21233.

T. Arndt and V. Schöppner, “Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen von Thermoplasten,” Joining Plastics, 2020.

T. Arndt and V. Schöppner, “Wenn Regeln Potenziale freisetzen,” K-Zeitung, 2020.

T. Arndt and V. Schöppner, “Quasi-Simultaneous Laser Transmission Welding,” PhotonicsViews, 2020.

N. Mügge, A. Kronberg, M. Glushenkov, and E. Kenig, “Modellierung des Wärmetransports in zyklisch durchströmten Wärmeübertragern,” presented at the Jahrestreffen der ProcessNet-Fachgruppe eEnergieverfahrenstechnik“, Frankfurt, 2020.

V. Schöppner and M. Bialaschik, “Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides,” presented at the 73th Annual Assembly of the International Institute of Welding (IIW), 2020.

E. Moritzer and J. Wächter, “From filament production to material qualification for the FDM process,” presented at the Seminar(Thermofisher): Polymer Compounds for 3D filaments – production, quality control and application, Karlsruhe, 2020.

B. Krivská et al., “Interdiffusion in aluminum-steel clad strip,” in Proc. 20th Conference of Czech and Slovak Physicists, Prague, 2020, pp. 153–154.

S. Bondarenko, O. Grydin, Y. Oginskiy, O. Kuzmina, and Y. Frolov, “Device for twin-roll casting of strips with profiled cross-section,”10.34185/tpm.1.2020.06__Theory and practice of metallurgy, no. 1, pp. 44–50, 2020, doi:10.34185/tpm.1.2020.06 .

B. KIVSKÁ, M. SLAPÁKOVÁ, O. Grydin, and M. CIESLAR, “Aluminum-steel clad material prepared by twin-roll casting,”10.37904/metal.2020.3595__2020, doi:10.37904/metal.2020.3595 .