N. Mügge, A. Kronberg, M. Glushenkov, V. Inguva, and E. Y. Kenig, “A Thermal Model for Recuperative Heat Engines Operating with Dense Working Fluids,”10.3303/CET2296030__Chemical Engineering Transactions, vol. 96, pp. 175–180, 2022, doi:10.3303/CET2296030 .
LibreCat: /record/34228
DOI: 10.3303/CET2296030

C. Dechert and E. Kenig, “CFD-Based Investigation of the Packing Microstructure Influence on Droplet Behavior and Film Flow,” presented at the The 12th International Conference Distillation &; Absorption 2022, Toulouse, France, 2022.
LibreCat: /record/33485

N. Mügge, A. Kronberg, M. Glushenkov, and E. Kenig, “On Heat Regeneration Limitations in Heat Engines With Dense Working Fluids,” presented at the Heat Powered Cycles Conference 2022, Bilbao, Spain, 2022.
LibreCat: /record/31223

G. Meschut et al., “Review on mechanical joining by plastic deformation,”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:10.1016/j.jajp.2022.100113 .
LibreCat: /record/34216
DOI: 10.1016/j.jajp.2022.100113

D. Hambach, “Evaluation eines digitalen Fachspezifischen Chinesischsprachkurses für Studierende des Ingenieurwesens,”10.3278/HSL2249W__10.3278/HSL2249W__die hochschullehre. Interdisziplinäre Zeitschrift für Hochschule und Lehre, no. 8, pp. 1–15, 2022, doi:10.3278/HSL2249W .
LibreCat: /record/43433
DOI: 10.3278/HSL2249W

S. Wituschek, F. Kappe, G. Meschut, and M. Lechner, “Geometric and mechanical joint characterization of conventionally  and tumbled self-piercing riveting joints,”10.1177/14644207221135400__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072211354, 2022, doi:10.1177/14644207221135400 .
LibreCat: /record/34243
DOI: 10.1177/14644207221135400

I. Gräßler, D. Preuß, and J. Pottebaum, “Extrahierung von Anforderungen aus natürlich-sprachlichen Lastenheften: Was erschwert eine KI-basierte Extrahierung?,” Softwaretechnik-Trends, vol. 42, no. 1, pp. 15–16, 2022.
LibreCat: /record/29891

T. Borgert and W. Homberg, “Energy saving potentials of an efficient recycling process of different aluminum rejects,”10.1016/j.egyr.2022.01.027__Energy Reports, vol. 8, pp. 399–404, 2022, doi:10.1016/j.egyr.2022.01.027 .
LibreCat: /record/29719
DOI: 10.1016/j.egyr.2022.01.027

G. Meschut et al., “Review on mechanical joining by plastic deformation,”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:10.1016/j.jajp.2022.100113 .
LibreCat: /record/32275
DOI: 10.1016/j.jajp.2022.100113

M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting,”10.1002/adem.202200874__Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi:10.1002/adem.202200874 .
LibreCat: /record/34242
DOI: 10.1002/adem.202200874

D. Engemann and W. Homberg, “Hot Spinning of Cutting Blades for Food Industry,” presented at the Esaform 2022, Braga - Portugal.
LibreCat: /record/30292

A. Oesterwinter, C. Wischer, and W. Homberg, “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC),”10.3390/met12050869__Metals, vol. 12, no. 5, Art. no. 869, 2022, doi:10.3390/met12050869 .
LibreCat: /record/31360
DOI: 10.3390/met12050869

C. Wischer and W. Homberg, “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints,”10.4028/p-1n6741__Key Engineering Materials, vol. 926, pp. 1468–1478, 2022, doi:10.4028/p-1n6741 .
LibreCat: /record/37647
DOI: 10.4028/p-1n6741

T. Heggemann, V. Psyk, A. Oesterwinter, M. Linnemann, V. Kräusel, and W. Homberg, “Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology,”10.3390/met12040660__Metals, vol. 12, no. 4, 2022, doi:10.3390/met12040660 .
LibreCat: /record/30885
DOI: 10.3390/met12040660

I. Gräßler, C. Oleff, M. Hieb, and D. Preuß, “Automated Requirement Dependency Analysis for Complex Technical Systems,”10.1017/pds.2022.189__Proceedings of the Design Society, vol. 2, pp. 1865–1874, 2022, doi:10.1017/pds.2022.189 .
LibreCat: /record/31791
DOI: 10.1017/pds.2022.189

I. Gräßler, D. Roesmann, J. Pottebaum, B. Corves, N. Mandischer, and M. Gürtler, “Mensch-Tracking zur Identifizierung des Voranschreitens von Roboterunterstützten Rettungseinsätzen der Feuerwehr,”10.26083/tuprints-00020963__in Tagungsband der VDI Mechatronik 2022, Darmstadt, 2022, pp. 151–156, doi:10.26083/tuprints-00020963 .
LibreCat: /record/32147
DOI: 10.26083/tuprints-00020963

I. Gräßler, D. Wiechel, and C. Oleff, “Extended RFLP for complex technical systems,” presented at the 8th IEEE International Symposium on Systems Engineering, Wien, 2022.
LibreCat: /record/33889

T. D. Joy, D. Weiß, B. Schramm, and G. Kullmer, “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations,”10.3390/app12157557__Applied Sciences, vol. 12, no. 15, Art. no. 7557, 2022, doi:10.3390/app12157557 .
LibreCat: /record/34224
DOI: 10.3390/app12157557

D. Weiß, B. Schramm, and G. Kullmer, “Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets,”10.1016/j.prostr.2022.03.082__in Procedia Structural Integrity, online, 2022, vol. 39, pp. 139–147, doi:10.1016/j.prostr.2022.03.082 .
LibreCat: /record/30726
DOI: 10.1016/j.prostr.2022.03.082

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase,”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, Art. no. 100135, 2022, doi:10.1016/j.jajp.2022.100135 .
LibreCat: /record/34070
DOI: 10.1016/j.jajp.2022.100135