Mügge, Nils, et al. “A Thermal Model for Recuperative Heat Engines Operating with Dense Working Fluids.”10.3303/CET2296030__Chemical Engineering Transactions, vol. 96, 2022, pp. 175–80, doi:10.3303/CET2296030.
LibreCat: /record/34228
DOI: 10.3303/CET2296030

Dechert, Christopher, and Eugeny Kenig. “CFD-Based Investigation of the Packing Microstructure Influence on Droplet Behavior and Film Flow.” Proceedings of the 12th International Conference Distillation &; Absorption 2022, 2022.
LibreCat: /record/33485

Mügge, Nils, et al. “On Heat Regeneration Limitations in Heat Engines With Dense Working Fluids.” Heat Powered Cycles Conference 2022, 2022.
LibreCat: /record/31223

Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat: /record/34216
DOI: 10.1016/j.jajp.2022.100113

Hambach, Dennis. “Evaluation eines digitalen Fachspezifischen Chinesischsprachkurses für Studierende des Ingenieurwesens.”10.3278/HSL2249W__10.3278/HSL2249W__die hochschullehre. Interdisziplinäre Zeitschrift für Hochschule und Lehre, no. 8, wbv Publikation, 2022, pp. 1–15, doi:10.3278/HSL2249W.
LibreCat: /record/43433
DOI: 10.3278/HSL2249W

Wituschek, Simon, et al. “Geometric and Mechanical Joint Characterization of Conventionally  and Tumbled Self-Piercing Riveting Joints.”10.1177/14644207221135400__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072211354, SAGE Publications, 2022, doi:10.1177/14644207221135400.
LibreCat: /record/34243
DOI: 10.1177/14644207221135400

Gräßler, Iris, et al. “Extrahierung von Anforderungen aus natürlich-sprachlichen Lastenheften: Was erschwert eine KI-basierte Extrahierung?” Softwaretechnik-Trends, vol. 42, no. 1, Köllen Druck &; Verlag GmbH, 2022, pp. 15–16.
LibreCat: /record/29891

Borgert, Thomas, and Werner Homberg. “Energy Saving Potentials of an Efficient Recycling Process of Different Aluminum Rejects.”10.1016/j.egyr.2022.01.027__Energy Reports, vol. 8, Elsevier BV, 2022, pp. 399–404, doi:10.1016/j.egyr.2022.01.027.
LibreCat: /record/29719
DOI: 10.1016/j.egyr.2022.01.027

Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat: /record/32275
DOI: 10.1016/j.jajp.2022.100113

Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”10.1002/adem.202200874__Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
LibreCat: /record/34242
DOI: 10.1002/adem.202200874

Engemann, David, and Werner Homberg. Hot Spinning of Cutting Blades for Food Industry.
LibreCat: /record/30292

Oesterwinter, Annika, et al. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”10.3390/met12050869__Metals, vol. 12, no. 5, 869, MDPI AG, 2022, doi:10.3390/met12050869.
LibreCat: /record/31360
DOI: 10.3390/met12050869

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”10.4028/p-1n6741__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1468–78, doi:10.4028/p-1n6741.
LibreCat: /record/37647
DOI: 10.4028/p-1n6741

Heggemann, Thomas, et al. “Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology.”10.3390/met12040660__Metals, vol. 12, no. 4, 2022, doi:10.3390/met12040660.
LibreCat: /record/30885
DOI: 10.3390/met12040660

Gräßler, Iris, et al. “Automated Requirement Dependency Analysis for Complex Technical Systems.”10.1017/pds.2022.189__Proceedings of the Design Society, vol. 2, Cambridge University Press (CUP), 2022, pp. 1865–74, doi:10.1017/pds.2022.189.
LibreCat: /record/31791
DOI: 10.1017/pds.2022.189

Gräßler, I., et al. “Mensch-Tracking zur Identifizierung des Voranschreitens von Roboterunterstützten Rettungseinsätzen der Feuerwehr.”10.26083/tuprints-00020963__Tagungsband der VDI Mechatronik 2022, 2022, pp. 151–56, doi:10.26083/tuprints-00020963.
LibreCat: /record/32147
DOI: 10.26083/tuprints-00020963

Gräßler, Iris, et al. Extended RFLP for Complex Technical Systems. 2022.
LibreCat: /record/33889

Joy, Tintu David, et al. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”10.3390/app12157557__Applied Sciences, vol. 12, no. 15, 7557, MDPI AG, 2022, doi:10.3390/app12157557.
LibreCat: /record/34224
DOI: 10.3390/app12157557

Weiß, Deborah, et al. “Influence of Plane Mixed-Mode Loading on the Kinking Angle of Clinchable Metal Sheets.”10.1016/j.prostr.2022.03.082__Procedia Structural Integrity, vol. 39, Elsevier BV, 2022, pp. 139–47, doi:10.1016/j.prostr.2022.03.082.
LibreCat: /record/30726
DOI: 10.1016/j.prostr.2022.03.082

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.
LibreCat: /record/34070
DOI: 10.1016/j.jajp.2022.100135