Haddadian S, Scheytt C. A 5.8 GHz CMOS Analog Front-End Targeting RF Energy Harvesting for Microwave RFIDs with MIMO Reader. In: IEEE International Conference on RFID Technology &; Application (RFID-TA) . ; 2019. doi:10.1109/RFID-TA.2019.8892037
LibreCat: /record/24057
DOI: 10.1109/RFID-TA.2019.8892037

Koppelmann B, Adelt P, Müller W, Scheytt C. RISC-V Extensions for Bit Manipulation Instructions. In: 29th International Symposium on Power and Timing Modeling, Optimization and Simulation (PATMOS). ; 2019. doi:10.1109/PATMOS.2019.8862170
LibreCat: /record/24058
DOI: 10.1109/PATMOS.2019.8862170

Amjad MS, Tebruegge C, Memedi A, et al. An IEEE 802.11 Compliant SDR-Based System for Vehicular Visible Light Communications. In: IEEE International Conference on Communications (ICC). ICC 2019 - 2019 IEEE International Conference on Communications (ICC); 2019:1-6. doi:10.1109/ICC.2019.8761960
LibreCat: /record/24059
DOI: 10.1109/ICC.2019.8761960

Adelt P, Koppelmann B, Müller W, Scheytt C. Analyse sicherheitskritischer Software fur RISC-V Prozessoren. In: MBMV 2019-22.Workshop Methoden Und Beschreibungssprachen Zur Modellierung Und Verifikation von Schaltungen Und Systemen (MBMV 2019). ; 2019.
LibreCat: /record/24060

Adelt P, Koppelmann B, Müller W, Scheytt C, Driessen B. QEMU for Dynamic Memory Analysis of Security Sensitive Software. In:  2nd International Workshop on Embedded Software for Industrial IoT in Conjunction with DATE 2019. ; 2019:32-34.
LibreCat: /record/24061

Adelt P, Koppelmann B, Müller W, Scheytt C. QEMU Support for RISC-V: Current State and Future Releases. 2nd International Workshop on RISC-V Research Activities. 2019;(Presentation).
LibreCat: /record/24063

Hoyer K-P, Schaper M. Alloy Design for Biomedical Applications in Additive Manufacturing. In: TMS 2019 148th Annual Meeting &; Exhibition Supplemental Proceedings. ; 2019. doi:10.1007/978-3-030-05861-6_44
LibreCat: /record/24097
DOI: 10.1007/978-3-030-05861-6_44

Tasche L, Hoyer K-P, Zhuravlev E, Grundmeier G, Schaper M, Keßler O. Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry. In: TMS 2019 148th Annual Meeting &; Exhibition Supplemental Proceedings. ; 2019. doi:10.1007/978-3-030-05861-6_45
LibreCat: /record/24098
DOI: 10.1007/978-3-030-05861-6_45

Eiber M, Deutscher Verband für Materialforschung und -prüfung e.V., eds. Einfluss von Eigenspannungen und Oberflächenrauheit additiv gefertigter Komponenten aus 316L auf die Beschichtbarkeit und Ermüdungsfestigkeit, .; 2019.
LibreCat: /record/24102

Azarmi F, ed. Adhesion of HVOF Sprayed WC-Co Coatings on Additively Processed 316L. ASM International; 2019.
LibreCat: /record/24103

Inguva V, Graceffa R, Schulz J, Bilsel O, Perot BJ. Creating round focused micro-jets from rectangular nozzles. Journal of Mechanical Science and Technology. Published online 2019:4281-4289. doi:10.1007/s12206-019-0824-x
LibreCat: /record/24122
DOI: 10.1007/s12206-019-0824-x

König J, Malberg S, Martens M, Niehaus S, Krohn-Grimberghe A, Ramaswamy A. Multi-stage reinforcement learning for object detection. In: Science and Information Conference. ; 2019:178-191.
LibreCat: /record/24141

Knoke T, Kronberg A, Glushenkov M, Kenig E. On the design of heat exchanger equipment for novel-type isobaric expansion engines. Applied Thermal Engineering. 2019;167(5):114382. doi:10.1016/j.applthermaleng.2019.114382
LibreCat: /record/24272
DOI: 10.1016/j.applthermaleng.2019.114382

Malatyali H, Schöppner V. Untersuchung des Dosierverhaltens von Carbonfaserrezyklaten für den Einsatz im gleichläufigen Doppel-schneckenextruder. In: 27. Fachtagung Technomer. ; 2019.
LibreCat: /record/24319

Malatyali H, Schöppner V, Tillmann W, Kokalj D. Deveploment of thin film sensors: The influence of layer variation on the measurement quality for inline melt temperature measurements. In: SPE ANTEC. ; 2019.
LibreCat: /record/24322

Vogtschmidt S, Schöppner V. Vibration welding of components with angled areas in the direction of vibration. In: ; 2019.
LibreCat: /record/24326

Bieber M, Tischendorf R, Reddemann M, Schmid H-J, Kneer R. Influence of precursor concentration on spray and particle formation in flame spray pyrolysis. In: ILASS (European Conference on Liquid Atomization and Spray Systems); 2019.
LibreCat: /record/24502

Menge D, Walter R, Schmid H-J, Breuer UP. FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen. Vol 1338.; 2019.
LibreCat: /record/24628

Peesel R-H, Schlosser F, Meschede H, Dunkelberg H, Walmsley T. Optimization of Cooling Utility System with Continuous Self-Learning Performance Models. Energies. Published online 2019. doi:10.3390/en12101926
LibreCat: /record/24632
DOI: 10.3390/en12101926

Schlosser F, Seevers J-P, Peesel R-H, Walmsley TG. System efficient integration of standby control and heat pump storage systems in manufacturing processes. Energy. Published online 2019:395-406. doi:10.1016/j.energy.2019.05.113
LibreCat: /record/24633
DOI: 10.1016/j.energy.2019.05.113