@inproceedings{42027,
  author       = {{Jöns, Klaus D. and  Atkinson, P. and Müller, M. and Heldmaier, M. and Ulrich, S. M. and Schmidt, O. G. and Michler, P.}},
  number       = {{1}},
  pages        = {{126--130}},
  title        = {{{Triggered Indistinguishable Single Photons with Narrow Line Widths from Site-Controlled Quantum Dots}}},
  volume       = {{13}},
  year         = {{2013}},
}

@article{39523,
  abstract     = {{<jats:title>ABSTRACT</jats:title><jats:p>Thermoelectric generators (TEG) are capable of transforming waste heat directly into electric power. With higher temperatures the yield of the devices rises which makes high-temperature contact materials important. The formation of titanium disilicide (TiSi<jats:sub>2</jats:sub>) and its properties were analyzed and optimized for the use in TEG. Depending on a direct or an indirect transformation into the C54 crystal structure the process forms a layer with a resistivity of 20-22 μΩcm. Process gases influence the resistivity and result in difference of 20 %. The growing rate of TiSi<jats:sub>2</jats:sub>on silicon dioxide was determined; it shows a strong dependence on the used atmosphere and temperature. A maximum overgrowing length of 30 μm was found.</jats:p>}},
  author       = {{Assion, Fabian and Schönhoff, Marcel and Hilleringmann, Ulrich}},
  issn         = {{0272-9172}},
  journal      = {{MRS Proceedings}},
  keywords     = {{General Engineering}},
  pages        = {{97--102}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Formation and Properties of TiSi<sub>2</sub> as Contact Material for High-Temperature Thermoelectric Generators}}},
  doi          = {{10.1557/opl.2012.1557}},
  volume       = {{1490}},
  year         = {{2013}},
}

@inproceedings{39524,
  author       = {{Kanwar, K. and Fischer, C. and Geneiss, V. and Mager, T. and Ballhausen, U. and Hedayat, C. and Hilleringmann, Ulrich}},
  booktitle    = {{2012 IEEE International Conference on RFID-Technologies and Applications (RFID-TA)}},
  publisher    = {{IEEE}},
  title        = {{{Electrical characterization of rubber mixture sheets based on a coaxial probe method in combination with 3D electromagnetic simulation model}}},
  doi          = {{10.1109/rfid-ta.2012.6404507}},
  year         = {{2013}},
}

@inproceedings{39516,
  author       = {{Kanwar, K. and Geneiss, V. and Mager, T. and Scheele, S. and Ballhausen, U. and Hedayat, C. and Hilleringmann, Ulrich}},
  booktitle    = {{2013 21st International Conference on Software, Telecommunications and Computer Networks - (SoftCOM 2013)}},
  publisher    = {{IEEE}},
  title        = {{{Design and analysis of UHF RFID tag for a rubber transmission belt based on 3D electrical model}}},
  doi          = {{10.1109/softcom.2013.6671864}},
  year         = {{2013}},
}

@inbook{44753,
  author       = {{Herzig, Bardo and Schaper, N. and Breiter, A. and Hartig, J. and Grafe, S. and Martin, A. and Christoph, G. and Ossenschmidt, D. and Brüggemann, M. and Langen, T.}},
  booktitle    = {{The German funding initiative "Modeling and Measuring Competencies in Higher Education": 23 research projects on engineering, economics and social sciences, educatio and generic skills of higher education students. (KoKoHs Working Papers, 3)}},
  editor       = {{Blömeke, S.  and Troitschanskaia, O.}},
  pages        = {{55--57}},
  publisher    = {{Humboldt University & Johannes Gutenberg University}},
  title        = {{{M³K - Modeling and Measuring Pedagogical Media Competencies of Pre-Service Teachers}}},
  year         = {{2013}},
}

@inproceedings{44759,
  author       = {{Herzig, Bardo and Martin, A.}},
  booktitle    = {{Medien – Bildung - Schule, Dokumentation der ersten Netzwerktagung Medienkompetenz Sachsen-Anhalt, Halle (Saale), 19. und 20. September 2011}},
  editor       = {{Fromme, J.}},
  location     = {{Sachsen-Anhalt, Halle (Saale)}},
  pages        = {{157--168}},
  title        = {{{Medienpädagogische Qualifikation für Lehrkräfte}}},
  year         = {{2013}},
}

@article{44968,
  author       = {{Hollóczki, O. and Firaha, D. S. and Friedrich, J. and Brehm, Martin and Cybik, R. and Wild, M. and Stark, A. and Kirchner, B.}},
  journal      = {{J. Phys. Chem. B}},
  pages        = {{5898--5907}},
  title        = {{{Carbene Formation in Ionic Liquids: Spontaneous, Induced, or Prohibited?}}},
  doi          = {{10.1021/jp4004399}},
  volume       = {{117 (19)}},
  year         = {{2013}},
}

@article{45769,
  author       = {{Kühne, Thomas D. and Khaliullin, Rustam Z.}},
  journal      = {{Nature Commun.}},
  title        = {{{Electronic signature of the instantaneous asymmetry in the first coordination shell of liquid water}}},
  volume       = {{4}},
  year         = {{2013}},
}

@inproceedings{56538,
  author       = {{Ecke, Andreas and Peñaloza, Rafael and Turhan, Anni-Yasmin}},
  booktitle    = {{KI 2013: Advances in Artificial Intelligence - 36th Annual German Conference on AI, Koblenz, Germany, September 16-20, 2013. Proceedings}},
  editor       = {{Timm, Ingo J. and Thimm, Matthias}},
  pages        = {{49–60}},
  publisher    = {{Springer}},
  title        = {{{Computing Role-Depth Bounded Generalizations in the Description Logic}}},
  doi          = {{10.1007/978-3-642-40942-4_5}},
  volume       = {{8077}},
  year         = {{2013}},
}

@article{64455,
  author       = {{Koukourakis, Nektarios and Gerhardt, Nils Christopher and Hofmann, Martin and Kunert, Bernardette and Liebich, Sven and Zimprich, Martin and Volz, Kerstin and Stolz, Wolfgang and Gebhard, Florian and Baranovskii, Sergei D. and Jandieri, Kakhaber}},
  journal      = {{Physical review}},
  number       = {{3}},
  title        = {{{Nonexponential photoluminescence transients in a Ga(NAsP) lattice matched to a (001) silicon substrate}}},
  doi          = {{10.1103/physrevb.87.035303}},
  volume       = {{87}},
  year         = {{2013}},
}

@article{58526,
  author       = {{Masri, Leila and Schulte, Rebecca D. and Timmermeyer, Nadine and Thanisch, Stefanie and Crummenerl, Lena Luise and Jansen, Gunther and Michiels, Nico K. and Schulenburg, Hinrich}},
  journal      = {{Ecology Letters}},
  keywords     = {{Bacillus thuringiensis, Bateman’s principle, Caenorhabditis elegans, ecological immunology, host–parasite coevolu- tion, Red Queen hypothesis, sexual selection}},
  number       = {{16}},
  pages        = {{461--468}},
  title        = {{{Sex differences in host defence interfere with parasite- mediated selection for outcrossing during host–parasite coevolution}}},
  doi          = {{10.1111/ele.12068}},
  year         = {{2013}},
}

@article{55050,
  author       = {{Ngomo, A-C Ngonga and Heino, Norman and Speck, René and Ermilov, Timofey and Tsatsaronis, George}},
  journal      = {{BioASQ Deliverable D}},
  pages        = {{3}},
  title        = {{{Annotation Tool}}},
  volume       = {{3}},
  year         = {{2013}},
}

@article{45153,
  author       = {{Kißgen, R. and Franke, Sebastian and Ladinig, B. and Mays, D. and Carlitscheck, J.}},
  journal      = {{Nachdruck aus: Empirische Sonderpädagogik}},
  number       = {{3}},
  pages        = {{263--276}},
  title        = {{{Schulbegleitung an Förderschulen in Nordrhein-Westfalen: Ausgangslage, Studienkonzeption und erste Ergebnisse}}},
  volume       = {{5}},
  year         = {{2013}},
}

@article{45157,
  author       = {{Kißgen, R. and Franke, Sebastian and Ladinig, B. and Mays, D. and Carlitscheck, J.}},
  journal      = {{Empirische Sonderpädagogik}},
  pages        = {{263--276}},
  title        = {{{Schulbegleitung an Förderschulen in Nordrhein-Westfalen: Ausgangslage, Studienkonzeption und erste Ergebnisse}}},
  volume       = {{3}},
  year         = {{2013}},
}

@article{45158,
  author       = {{Mays, D. and Ladinig, B. and Carlitscheck, J. and Franke, Sebastian and Kißgen, R.}},
  journal      = {{Praxis Schule 5-10}},
  number       = {{1}},
  pages        = {{8--11}},
  title        = {{{Inklusion und Lehrerrolle - Das Schulsystem im Wandel}}},
  volume       = {{24}},
  year         = {{2013}},
}

@article{45161,
  author       = {{Mays, D. and Ladinig, B. and Carlitscheck, J. and Franke, Sebastian and Kißgen, R.}},
  journal      = {{Praxis Schule 5-10}},
  number       = {{1}},
  pages        = {{34--36}},
  title        = {{{Handeln unter Druck - Methoden der Entschleunigung}}},
  volume       = {{24}},
  year         = {{2013}},
}

@inproceedings{58669,
  author       = {{Hennig, Markus and Gaspers, Daniel and Mertsching, Barbel}},
  booktitle    = {{12th International Conference on Information Technology Based Higher Education and Training (ITHET)}},
  publisher    = {{IEEE}},
  title        = {{{Interactive WebGL-based 3D Visualizations for Situated Mathematics Teaching}}},
  doi          = {{10.1109/ithet.2013.6671038}},
  year         = {{2013}},
}

@article{60451,
  abstract     = {{<jats:p>Nowadays, digital 3D models are in widespread and ubiquitous use, and each specific application dealing with 3D geometry has its own quality requirements that restrict the class of acceptable and supported models. This article analyzes typical defects that make a 3D model unsuitable for key application contexts, and surveys existing algorithms that process, repair, and improve its structure, geometry, and topology to make it appropriate to case-by-case requirements.</jats:p>
          <jats:p>The analysis is focused on polygon meshes, which constitute by far the most common 3D object representation. In particular, this article provides a structured overview of mesh repairing techniques from the point of view of the application context. Different types of mesh defects are classified according to the upstream application that produced the mesh, whereas mesh quality requirements are grouped by representative sets of downstream applications where the mesh is to be used. The numerous mesh repair methods that have been proposed during the last two decades are analyzed and classified in terms of their capabilities, properties, and guarantees. Based on these classifications, guidelines can be derived to support the identification of repairing algorithms best-suited to bridge the compatibility gap between the quality provided by the upstream process and the quality required by the downstream applications in a given geometry processing scenario.</jats:p>}},
  author       = {{Attene, Marco and Campen, Marcel and Kobbelt, Leif}},
  issn         = {{0360-0300}},
  journal      = {{ACM Computing Surveys}},
  number       = {{2}},
  pages        = {{1--33}},
  publisher    = {{Association for Computing Machinery (ACM)}},
  title        = {{{Polygon mesh repairing}}},
  doi          = {{10.1145/2431211.2431214}},
  volume       = {{45}},
  year         = {{2013}},
}

@inproceedings{60454,
  author       = {{Zimmer, Henrik and Campen, Marcel and Kobbelt, Leif}},
  booktitle    = {{2013 IEEE Conference on Computer Vision and Pattern Recognition}},
  publisher    = {{IEEE}},
  title        = {{{Efficient Computation of Shortest Path-Concavity for 3D Meshes}}},
  doi          = {{10.1109/cvpr.2013.280}},
  year         = {{2013}},
}

@book{65143,
  editor       = {{Keuchen, Marion and Kuhlmann, Helga and Leutzsch, Martin}},
  isbn         = {{978-3-943609-81-3}},
  pages        = {{480}},
  publisher    = {{Garamond Edition Treskeia}},
  title        = {{{Musik in Religion – Religion in Musik}}},
  volume       = {{10}},
  year         = {{2013}},
}