@misc{30730,
  abstract     = {{Es ist eine Reibscheibe (18) für
eine Reibungskupplung (10) vorgesehen mit einem zwischen Druckplatten (14, 16, 38) verklemmbaren Rotorring
(32), Reibbelägen zur Herstellung eines Reibschlusses des
Rotorrings (32) mit der jeweiligen Druckplatte, (14, 16, 38),
einem axial feststehenden Wellenelement (20) zur Übertragung eines Drehmoments und mindestens einem mit dem
Rotorring (32) und mit dem Wellenelement (20) im Wesentlichen drehfest verbundenen und in axialer Richtung elastisch nachgiebigen Federelement (34) zur elastischen axialen Verlagerung des Rotorrings (32) relativ zum Wellenelement (20), wobei der Rotorring (32) zwischen einer Offenstellung, in welcher das Federelement (34) entspannt ist,
und einer Schließstellung, in welcher das Federelement
(34) von mindestens einer Druckplatte (14, 16, 38) verspannt ist, im Wesentlichen in axialer Richtung parallelverschiebbar ist. Durch den über den vergleichsweise geringen
erforderlichen axialen Verlagerungsweg federnd an dem
axial unbeweglichen Wellenelement (20) angebundenen
die Reibbeläge tragenden Rotorring (32) kann bei geringen
Herstellungskosten unnötige Reibung vermieden werden,
so dass eine verschleißarme und geräuscharme lösbare
Koppelung von Bauteilen ermöglicht ist. }},
  author       = {{Zimmer, Detmar and Blumenthal, Lars Martin and Schadomsky, Magnus}},
  pages        = {{14}},
  title        = {{{Reibscheibe für eine Reibungskupplung}}},
  year         = {{2022}},
}

@article{30880,
  author       = {{Kobecki, Michal and Scherbakov, Alexey V. and Kukhtaruk, Serhii M. and Yaremkevich, Dmytro D. and Henksmeier, Tobias and Trapp, Alexander and Reuter, Dirk and Gusev, Vitalyi E. and Akimov, Andrey V. and Bayer, Manfred}},
  issn         = {{0031-9007}},
  journal      = {{Physical Review Letters}},
  keywords     = {{General Physics and Astronomy}},
  number       = {{15}},
  publisher    = {{American Physical Society (APS)}},
  title        = {{{Giant Photoelasticity of Polaritons for Detection of Coherent Phonons in a Superlattice with Quantum Sensitivity}}},
  doi          = {{10.1103/physrevlett.128.157401}},
  volume       = {{128}},
  year         = {{2022}},
}

@article{32234,
  author       = {{Wojciechowski, M}},
  issn         = {{2352-3409}},
  journal      = {{Data Brief}},
  pages        = {{108318}},
  title        = {{{Dataset for random uniform distributions of 2D circles and 3D spheres.}}},
  volume       = {{43}},
  year         = {{2022}},
}

@inbook{32339,
  author       = {{Häsel-Weide, Uta and Seitz, S. and Wallner, Melina and Wilke, Y.}},
  booktitle    = {{Qualifizierung für Inklusion. Sekundarstufe}},
  editor       = {{Lutz, D. and Becker, J. and Buchhaupt, F. and Katzenbach, D. and Strecker, A. and Urban, M.}},
  pages        = {{83--100}},
  publisher    = {{Waxmann}},
  title        = {{{Professionalisierung für inklusiven Mathematikunterricht. Interdisziplinäre Seminarkonzeption zur reflexiven Professionalisierung angehender Mathematiklehrkräfte in der Sekundarstufe}}},
  year         = {{2022}},
}

@inbook{32419,
  author       = {{Tönsing, Johanna}},
  booktitle    = {{Rassismussensibler Literaturunterricht. Neue Perspektiven einer kulturwissenschaftlichen Literaturdidaktik}},
  editor       = {{Hofmann, Michael and Becker, Karina}},
  title        = {{{Chancen für einen rassismussensiblen Literaturunterricht - didaktische Perspektiven für das Lesen von Menschenzoogeschichten in der Grundschule am Beispiel von Rainer Maria Rilkes Gedicht "Die Aschanti. Jardin d´acclimatation" (1902)}}},
  year         = {{2022}},
}

@article{34022,
  abstract     = {{<jats:p>Background: Medical professionals working in an elite sport environment have the challenging task to balance the athlete’s readiness to return to the playing field after severe injury with other stakeholders’ (coaches, sponsors, teammates) opinions and objectives.Objectives: Our study aimed to evaluate differences in the physical profiles of elite rugby players at return to play (RTP) after a severe knee injury, compared with their pre-injury profiles and matched controls.Method: Before the injury, participants performed four performance tests during their preseason screening. These tests were repeated and compared to baseline once a player was declared fit to play.Results: Significant differences (p ≤ 0.05) were found in the injured players’ group who were slower over 10 m speed, in their decision-making time and the total time of the reactive agility tests at RTP, whilst controls were significantly faster over 10 m and 30 m speed tests. The countermovement jump outcomes showed significant improvement in the uninjured participants (p ≤ 0.05).Conclusion: Our study highlights that injured players’ running speeds and decision-making times are slower after injury. The uninjured players have a positive outcome to training and match stimulus by improving their running speed and lower body explosive power during the season.Clinical implications: Our study provides insight into the RTP profile of elite rugby players, and a novel finding was the decision-making time deficit. This highlights the importance of cognitive training during injury rehabilitation as athletes make numerous decisions in a pressured and uncontrolled environment during a match. Speed training development is recommended as the athletes were slower after severe knee injury.</jats:p>}},
  author       = {{Robyn, Aneurin D. and Louw, Quinette A. and Baumeister, Jochen}},
  issn         = {{2410-8219}},
  journal      = {{South African Journal of Physiotherapy}},
  keywords     = {{Physical Therapy, Sports Therapy and Rehabilitation}},
  number       = {{1}},
  publisher    = {{AOSIS}},
  title        = {{{Return to play in elite rugby players after severe knee injuries}}},
  doi          = {{10.4102/sajp.v78i1.1629}},
  volume       = {{78}},
  year         = {{2022}},
}

@article{34099,
  abstract     = {{<jats:p>Using a unique combination of advanced characterization techniques, we identify specific degradation mechanisms and quantify degradative species formed during fast charge cycling of lithium-ion battery pouch cells.</jats:p>}},
  author       = {{McShane, Eric J. and Paul, Partha P. and Tanim, Tanvir R. and Cao, Chuntian and Steinrück, Hans-Georg and Thampy, Vivek and Trask, Stephen E. and Dunlop, Alison R. and Jansen, Andrew N. and Dufek, Eric J. and Toney, Michael F. and Weker, Johanna Nelson and McCloskey, Bryan D.}},
  issn         = {{2050-7488}},
  journal      = {{Journal of Materials Chemistry A}},
  keywords     = {{General Materials Science, Renewable Energy, Sustainability and the Environment, General Chemistry}},
  number       = {{44}},
  pages        = {{23927--23939}},
  publisher    = {{Royal Society of Chemistry (RSC)}},
  title        = {{{Multimodal quantification of degradation pathways during extreme fast charging of lithium-ion batteries}}},
  doi          = {{10.1039/d2ta05887a}},
  volume       = {{10}},
  year         = {{2022}},
}

@inproceedings{34152,
  author       = {{Otroshi, Mortaza and Meschut, Gerson}},
  location     = {{Rostock}},
  publisher    = {{Europäische Forschungsgesellschaft für Blechverarbeitung e.V. }},
  title        = {{{Methodenentwicklung zur Verbesserung der Schädigungsmodellierung in der numerischen 3D-Belastungssimulation mechanischer Fügeverfahren unter Berücksichtigung der fügeinduzierten Vorbeanspruchung}}},
  year         = {{2022}},
}

@article{30626,
  abstract     = {{Clinching is a very cost-efficient method for joining two or more sheets made of identical or different materials. However, the current evaluation methods cannot confirm the critical geometrical features of joints such as neck thickness, undercut, and bottom thickness. Furthermore, the effects caused by joining process such as elastic deformation and crack-closure are significant for the joining quality, but often earn insufficient attention. Therefore, computed tomography (CT) and Transient Dynamic Analysis (TDA) as an ultrasonic testing and evaluation procedure are combined to overcome the obstacles mentioned above. In order to have a well-defined and reproducible typical geometrical error in clinching, specimens with a pre-specified lateral offset of the punch with 0.1 mm, 0.2 mm are as well as with no lateral offset are investigated using CT. The specimens are treated with conductive copper varnish in varying intensities to support the two sheets' distinguishability in the CT measurement. The subsequently extracted surfaces from CT-scan data are used to create three-dimensional models for a numerical Transient Dynamic Analysis. Hereby, a harmonic force is applied to one sheet and the transferred energy is determined at the opposite side of the clinch point on the other sheet. The transmitted energy can be used as a quantitative measure for the joining quality. This setup is simulated by means of Finite-Element-Method and the specimens are investigated experimentally using a piezo actuator and a piezo sensor. The novelty of the results presented here is the completely non-destructive investigation of joint specimen by CT of similar materials with a contrast given foil in between the sheets and the subsequent TDA, which can easily detect difference between the specimens by evaluation of the energy dissipation of the joints.}},
  author       = {{Köhler, D. and Sadeghian, B. and Troschitz, J. and Kupfer, R. and Gude, M. and Brosius, A.}},
  journal      = {{Journal of Advanced Joining Processes}},
  pages        = {{100089}},
  title        = {{{Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis}}},
  doi          = {{10.1016/j.jajp.2021.100089}},
  volume       = {{5}},
  year         = {{2022}},
}

@article{30625,
  abstract     = {{Continuous fiber reinforced thermoplastics (CFRT)/steel hybrid parts offer promising properties and possibilities, which can exceed the capabilities of both individual materials. In this case, the joining operation presents the main challenge. This paper studies the direct pin pressing where metallic pins with undercutting geometries, protruding from the metal component, are inserted into a locally infrared heated CFRT component. The aim is to investigate the joining process with a focus on the filling of the undercut features with matrix and fibers to create a primarily form-fitting joint. For good mechanical properties of the joint, it is crucial, that the undercutting features are filled and do not lead to significant deconsolidations. The pin structures are manufactured from 42CrMo4 steel on a cnc-lathe and are joined via welding with HCT600+Zn sheet metal. The CFRT samples are manufactured from polypropylene and approximately 45% vol. unidirectional glass fibers. In the scope of this study, different pin geometries are joined with varying process settings and micro sections of the joints are investigated via reflected light microscopy. It could be shown that the undercuts can be completely filled with matrix and fiber material using the described process route. Based on the optical investigations a suitable setting of joining parameters is defined and lap shear as well as cross head samples are manufactured and experimentally tested. It could be seen that independently from the pin geometry the lap shear strength was primarily limited due to shear failure of the pin structures and it is assumed that the base diameter and pin strength predominantly determine the joint strength. Cross head samples failed due to pin extraction. Here, a significant increase of the joint strength with undercutting features could be shown in comparison to cylindrical reference pins.}},
  author       = {{Popp, J. and Drummer, D.}},
  journal      = {{Journal of Advanced Joining Processes}},
  pages        = {{100084}},
  title        = {{{Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating}}},
  doi          = {{10.1016/j.jajp.2021.100084}},
  volume       = {{5}},
  year         = {{2022}},
}

@article{31541,
  author       = {{Kobecki, Michal and Scherbakov, Alexey V. and Kukhtaruk, Serhii M. and Yaremkevich, Dmytro D. and Henksmeier, Tobias and Trapp, Alexander and Reuter, Dirk and Gusev, Vitalyi E. and Akimov, Andrey V. and Bayer, Manfred}},
  issn         = {{0031-9007}},
  journal      = {{Physical Review Letters}},
  keywords     = {{General Physics and Astronomy}},
  number       = {{15}},
  publisher    = {{American Physical Society (APS)}},
  title        = {{{Giant Photoelasticity of Polaritons for Detection of Coherent Phonons in a Superlattice with Quantum Sensitivity}}},
  doi          = {{10.1103/physrevlett.128.157401}},
  volume       = {{128}},
  year         = {{2022}},
}

@article{32094,
  author       = {{Goller, Michael and Steffen, Bianca and Lau, D.}},
  journal      = {{Professionalisierung der Gesundheitsberufe. Berufliche und hochschulische Bildung im Spiegel aktueller Forschung}},
  number       = {{33}},
  publisher    = {{Franz Steiner Verlag}},
  title        = {{{Kompetenzerwerb auf der Schulstation: Eine Mixed-Methods-Replikationsstudie}}},
  year         = {{2022}},
}

@misc{33286,
  author       = {{Hopp, Matthias and Tölle, Lisa and Monsé, C. and Rosenkranz, N. and Haibel, N. and Walter, D. and Bünger, J. and Westphal, G.}},
  booktitle    = {{Journal of Material Science and Chemical Engineering}},
  issn         = {{2327-6053}},
  title        = {{{Characterization of Fiber Dust Resulting from Recycling of Carbon Fiber-Reinforced Thermoplastics (CFRP) and Their Cell Toxicity}}},
  year         = {{2022}},
}

@inbook{33412,
  author       = {{Schönhärl, Korinna}},
  booktitle    = {{Ökonomie und Moral im langen 20. Jahrhundert. Eine Anthologie}},
  editor       = {{Finger, Jürgen and Möckel, Benjamin}},
  isbn         = {{ISBN 978-3-8353-5200-1}},
  pages        = {{228–237}},
  publisher    = {{Wallstein-Verlag}},
  title        = {{{"Ein Steuerzahler!" Tax education in der frühen Bundesrepublik}}},
  year         = {{2022}},
}

@inbook{33123,
  author       = {{Schlieper, Hendrik}},
  booktitle    = {{El drama histórico en los romanticismos de España e lberoamérica. Procesos transnacionales de intercambio y renegociación de identidades. (Teoría y Práctica del Teatro, 29)}},
  editor       = {{Greilich , Susanne  and Schmelzer , Dagmar }},
  pages        = {{191--205}},
  publisher    = {{Olms}},
  title        = {{{Atar-Gull o Una venganza africana de Lucio V. Mansilla: un drama del romanticismo transatlántico}}},
  year         = {{2022}},
}

@inproceedings{33508,
  abstract     = {{In this work, methods will be evaluated to numerically calculate the passive electrical parameters of planar coils. These parameters can then be used to optimize inductive applications such as wireless power transmission. The focus here will be on inductive localization, which uses high-frequency magnetic fields and the resulting induced voltage to provide localization through the coupling parameter mutual inductance. To achieve localization with high accuracy and best possible operation (resonance, signal strength, etc.), the coil parameters need to be well known. For this reason, some numerical methods for the calculation of these quantities are presented and validated. In addition, the physical effects are thereby considered in more detail, allowing the localization procedure to be better optimized compared to simulative black-box methods. The goal should be a dedicated simulation platform for planar coils to be able to develop training data for neural networks and to test and optimize localization algorithms.}},
  author       = {{Lange, Sven and Hedayat, Christian and Kuhn, Harald and Hilleringmann, Ulrich}},
  booktitle    = {{2022 Smart Systems Integration (SSI)}},
  keywords     = {{Simulation Environment, Inductive Localization, Coil Parameters, Inductive Applications, Near-Field}},
  location     = {{Grenoble, France}},
  publisher    = {{IEEE}},
  title        = {{{Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings}}},
  doi          = {{10.1109/ssi56489.2022.9901416}},
  year         = {{2022}},
}

@article{33713,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>The development of technical systems requires close cooperation of stakeholders from different disciplines. This collaboration takes place in workshops. Driven by digitalization and by the current pandemic such workshops take place primarily online. Suitable collaboration tools and methods are crucial to success. At the beginning of such workshops, use and damage scenarios are identified. In this paper, we presented a method and tool for identifying and modeling use and damage scenarios, which we evaluated in 14 online workshops with a total of 118 participants over a period of almost 3 years.</jats:p>}},
  author       = {{Japs, Sergej and Schmidt, Sebastian and Kargl, Frank and Kaiser, Lydia and Kharatyan, Aschot and Dumitrescu, Roman}},
  issn         = {{2732-527X}},
  journal      = {{Proceedings of the Design Society}},
  pages        = {{1599--1608}},
  publisher    = {{Cambridge University Press (CUP)}},
  title        = {{{Collaborative Modeling of Use Case &amp; Damage Scenarios in Online Workshops Using a 3D Environment}}},
  doi          = {{10.1017/pds.2022.162}},
  volume       = {{2}},
  year         = {{2022}},
}

@inbook{33728,
  author       = {{Bielak, C. R. and Böhnke, M. and Bobbert, M. and Meschut, G.}},
  booktitle    = {{The Minerals, Metals &amp; Materials Series}},
  isbn         = {{9783031062117}},
  issn         = {{2367-1181}},
  publisher    = {{Springer International Publishing}},
  title        = {{{Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains}}},
  doi          = {{10.1007/978-3-031-06212-4_15}},
  year         = {{2022}},
}

@article{23566,
  author       = {{Kundisch, Dennis and Muntermann, J. and Oberländer, A. M. and Rau, D. and Röglinger, M. and Schoormann, T. and Szopinski, Daniel}},
  journal      = {{Business & Information Systems Engineering}},
  number       = {{4}},
  pages        = {{421--439}},
  title        = {{{An update for taxonomy designers: Methodological guidance from information systems research}}},
  volume       = {{64}},
  year         = {{2022}},
}

@article{32326,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Genetic factors are relevant for both eating disorders and body weight regulation. A recent genome-wide association study (GWAS) for anorexia nervosa (AN) detected eight genome-wide significant chromosomal loci. One of these loci, rs10747478, was also genome-wide and significantly associated with body mass index (BMI). The nearest coding gene is the Polypyrimidine Tract Binding Protein 2 gene (<jats:italic>PTBP2</jats:italic>). To detect mutations in <jats:italic>PTBP2</jats:italic>, Sanger sequencing of the coding region was performed in 192 female patients with AN (acute or recovered) and 191 children or adolescents with (extreme) obesity. Twenty-five variants were identified. Twenty-three of these were predicted to be pathogenic or functionally relevant in at least one in silico tool. Two novel synonymous variants (p.Ala77Ala and p.Asp195Asp), one intronic SNP (rs188987764), and the intronic deletion (rs561340981) located in the highly conserved region of <jats:italic>PTBP2</jats:italic> may have functional consequences. Ten of 20 genes interacting with <jats:italic>PTBP2</jats:italic> were studied for their impact on body weight regulation based on either previous functional studies or GWAS hits for body weight or BMI. In a GWAS for BMI (Pulit et al. 2018), the number of genome-wide significant associations at the <jats:italic>PTBP2</jats:italic> locus was different between males (60 variants) and females (two variants, one of these also significant in males). More than 65% of these 61 variants showed differences in the effect size pertaining to BMI between sexes (absolute value of <jats:italic>Z</jats:italic>-score &gt;2, two-sided <jats:italic>p</jats:italic> &lt; 0.05). One LD block overlapping 5′UTR and all coding regions of <jats:italic>PTBP2</jats:italic> comprises 56 significant variants in males. The analysis based on sex-stratified BMI GWAS summary statistics implies that <jats:italic>PTBP2</jats:italic> may have a more pronounced effect on body weight regulation in males than in females.</jats:p>}},
  author       = {{Zheng, Yiran and Rajcsanyi, Luisa Sophie and Herpertz-Dahlmann, Beate and Seitz, Jochen and de Zwaan, Martina and Herzog, Wolfgang and Ehrlich, Stefan and Zipfel, Stephan and Giel, Katrin and Egberts, Karin and Burghardt, Roland and Föcker, Manuel and Al-Lahham, Saad and Peters, Triinu and Libuda, Lars and Antel, Jochen and Hebebrand, Johannes and Hinney, Anke}},
  issn         = {{2158-3188}},
  journal      = {{Translational Psychiatry}},
  keywords     = {{Biological Psychiatry, Cellular and Molecular Neuroscience, Psychiatry and Mental health}},
  number       = {{1}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{PTBP2 – a gene with relevance for both Anorexia nervosa and body weight regulation}}},
  doi          = {{10.1038/s41398-022-02018-5}},
  volume       = {{12}},
  year         = {{2022}},
}