[{"abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>The <jats:italic>amoebot model</jats:italic> (Derakhshandeh et al. in: SPAA ACM, pp 220–222. <jats:ext-link xmlns:xlink=\"http://www.w3.org/1999/xlink\" ext-link-type=\"doi\" xlink:href=\"10.1145/2612669.2612712\">https://doi.org/10.1145/2612669.2612712</jats:ext-link>, 2014) has been proposed as a model for programmable matter consisting of tiny, robotic elements called <jats:italic>amoebots</jats:italic>. We consider the <jats:italic>reconfigurable circuit extension</jats:italic> (Feldmann et al. in J Comput Biol 29(4):317–343. <jats:ext-link xmlns:xlink=\"http://www.w3.org/1999/xlink\" ext-link-type=\"doi\" xlink:href=\"10.1089/cmb.2021.0363\">https://doi.org/10.1089/cmb.2021.0363</jats:ext-link>, 2022) of the geometric amoebot model that allows the amoebot structure to interconnect amoebots by so-called <jats:italic>circuits</jats:italic>. A circuit permits the instantaneous transmission of signals between the connected amoebots. In this paper, we examine the structural power of the reconfigurable circuits. We start with fundamental problems like the <jats:italic>stripe computation problem</jats:italic> where, given any connected amoebot structure <jats:italic>S</jats:italic>, an amoebot <jats:italic>u</jats:italic> in <jats:italic>S</jats:italic>, and some axis <jats:italic>X</jats:italic>, all amoebots belonging to axis <jats:italic>X</jats:italic> through <jats:italic>u</jats:italic> have to be identified. Second, we consider the <jats:italic>global maximum problem</jats:italic>, which identifies an amoebot at the highest possible position with respect to some direction in some given amoebot (sub)structure. A solution to this problem can be used to solve the <jats:italic>skeleton problem</jats:italic>, where a cycle of amoebots has to be found in the given amoebot structure which contains all boundary amoebots. A canonical solution to that problem can be used to come up with a canonical path, which provides a unique characterization of the shape of the given amoebot structure. Constructing canonical paths for different directions allows the amoebots to set up a spanning tree and to check symmetry properties of the given amoebot structure. The problems are important for a number of applications like rapid shape transformation, energy dissemination, and structural monitoring. Interestingly, the reconfigurable circuit extension allows polylogarithmic-time solutions to all of these problems.</jats:p>","lang":"eng"}],"publication":"Natural Computing","citation":{"mla":"Padalkin, Andreas, et al. “The Structural Power of Reconfigurable Circuits in the Amoebot Model.” <i>Natural Computing</i>, Springer Science and Business Media LLC, 2024, doi:<a href=\"https://doi.org/10.1007/s11047-024-09981-6\">10.1007/s11047-024-09981-6</a>.","bibtex":"@article{Padalkin_Scheideler_Warner_2024, title={The structural power of reconfigurable circuits in the amoebot model}, DOI={<a href=\"https://doi.org/10.1007/s11047-024-09981-6\">10.1007/s11047-024-09981-6</a>}, journal={Natural Computing}, publisher={Springer Science and Business Media LLC}, author={Padalkin, Andreas and Scheideler, Christian and Warner, Daniel}, year={2024} }","ama":"Padalkin A, Scheideler C, Warner D. The structural power of reconfigurable circuits in the amoebot model. <i>Natural Computing</i>. Published online 2024. doi:<a href=\"https://doi.org/10.1007/s11047-024-09981-6\">10.1007/s11047-024-09981-6</a>","ieee":"A. Padalkin, C. Scheideler, and D. Warner, “The structural power of reconfigurable circuits in the amoebot model,” <i>Natural Computing</i>, 2024, doi: <a href=\"https://doi.org/10.1007/s11047-024-09981-6\">10.1007/s11047-024-09981-6</a>.","apa":"Padalkin, A., Scheideler, C., &#38; Warner, D. (2024). The structural power of reconfigurable circuits in the amoebot model. <i>Natural Computing</i>. <a href=\"https://doi.org/10.1007/s11047-024-09981-6\">https://doi.org/10.1007/s11047-024-09981-6</a>","short":"A. Padalkin, C. Scheideler, D. Warner, Natural Computing (2024).","chicago":"Padalkin, Andreas, Christian Scheideler, and Daniel Warner. “The Structural Power of Reconfigurable Circuits in the Amoebot Model.” <i>Natural Computing</i>, 2024. <a href=\"https://doi.org/10.1007/s11047-024-09981-6\">https://doi.org/10.1007/s11047-024-09981-6</a>."},"type":"journal_article","date_created":"2024-07-24T14:28:27Z","publication_status":"published","date_updated":"2024-07-24T14:28:43Z","status":"public","year":"2024","title":"The structural power of reconfigurable circuits in the amoebot model","author":[{"last_name":"Padalkin","first_name":"Andreas","full_name":"Padalkin, Andreas","id":"88238"},{"first_name":"Christian","last_name":"Scheideler","full_name":"Scheideler, Christian","id":"20792"},{"first_name":"Daniel","last_name":"Warner","full_name":"Warner, Daniel","id":"3902"}],"publication_identifier":{"issn":["1567-7818","1572-9796"]},"user_id":"88238","doi":"10.1007/s11047-024-09981-6","publisher":"Springer Science and Business Media LLC","_id":"55379","language":[{"iso":"eng"}]},{"user_id":"391","editor":[{"full_name":"Hermann, Kay","last_name":"Hermann","first_name":"Kay"},{"full_name":"Schwitzer, Boris","first_name":"Boris","last_name":"Schwitzer"}],"page":"73-85","main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-662-68345-3_5"}],"_id":"44860","language":[{"iso":"ger"}],"publisher":"J.B. Metzler","date_updated":"2024-09-05T13:37:55Z","status":"public","title":"Kritische Mathematik und die Axiomatik Hilberts","year":"2024","author":[{"last_name":"Peckhaus","first_name":"Volker","full_name":"Peckhaus, Volker","id":"391"}],"type":"book_chapter","department":[{"_id":"520"}],"date_created":"2023-05-16T10:11:17Z","place":"Berlin","publication":"Der Geist der kritischen Schule. Kantisches Denken in der Tradition von Jakob Friedrich Fries und Leonard Nelson im 20. Jahrhundert: Wirkungen und Aktualität","citation":{"short":"V. Peckhaus, in: K. Hermann, B. Schwitzer (Eds.), Der Geist der kritischen Schule. Kantisches Denken in der Tradition von Jakob Friedrich Fries und Leonard Nelson im 20. Jahrhundert: Wirkungen und Aktualität, J.B. Metzler, Berlin, 2024, pp. 73–85.","chicago":"Peckhaus, Volker. “Kritische Mathematik und die Axiomatik Hilberts.” In <i>Der Geist der kritischen Schule. Kantisches Denken in der Tradition von Jakob Friedrich Fries und Leonard Nelson im 20. Jahrhundert: Wirkungen und Aktualität</i>, edited by Kay Hermann and Boris Schwitzer, 73–85. Berlin: J.B. Metzler, 2024.","ieee":"V. Peckhaus, “Kritische Mathematik und die Axiomatik Hilberts,” in <i>Der Geist der kritischen Schule. Kantisches Denken in der Tradition von Jakob Friedrich Fries und Leonard Nelson im 20. Jahrhundert: Wirkungen und Aktualität</i>, K. Hermann and B. Schwitzer, Eds. Berlin: J.B. Metzler, 2024, pp. 73–85.","apa":"Peckhaus, V. (2024). Kritische Mathematik und die Axiomatik Hilberts. In K. Hermann &#38; B. Schwitzer (Eds.), <i>Der Geist der kritischen Schule. Kantisches Denken in der Tradition von Jakob Friedrich Fries und Leonard Nelson im 20. Jahrhundert: Wirkungen und Aktualität</i> (pp. 73–85). J.B. Metzler.","bibtex":"@inbook{Peckhaus_2024, place={Berlin}, title={Kritische Mathematik und die Axiomatik Hilberts}, booktitle={Der Geist der kritischen Schule. Kantisches Denken in der Tradition von Jakob Friedrich Fries und Leonard Nelson im 20. Jahrhundert: Wirkungen und Aktualität}, publisher={J.B. Metzler}, author={Peckhaus, Volker}, editor={Hermann, Kay and Schwitzer, Boris}, year={2024}, pages={73–85} }","ama":"Peckhaus V. Kritische Mathematik und die Axiomatik Hilberts. In: Hermann K, Schwitzer B, eds. <i>Der Geist der kritischen Schule. Kantisches Denken in der Tradition von Jakob Friedrich Fries und Leonard Nelson im 20. Jahrhundert: Wirkungen und Aktualität</i>. J.B. Metzler; 2024:73-85.","mla":"Peckhaus, Volker. “Kritische Mathematik und die Axiomatik Hilberts.” <i>Der Geist der kritischen Schule. Kantisches Denken in der Tradition von Jakob Friedrich Fries und Leonard Nelson im 20. Jahrhundert: Wirkungen und Aktualität</i>, edited by Kay Hermann and Boris Schwitzer, J.B. Metzler, 2024, pp. 73–85."}},{"date_updated":"2024-09-17T10:05:49Z","author":[{"id":"44458","full_name":"Tissen, Denis","last_name":"Tissen","first_name":"Denis"},{"id":"36312","full_name":"Bernijazov, Ruslan","first_name":"Ruslan","last_name":"Bernijazov"},{"last_name":"Koldewey","first_name":"Christian","orcid":"https://orcid.org/0000-0001-7992-6399","full_name":"Koldewey, Christian","id":"43136"},{"id":"16190","full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman"}],"conference":{"end_date":"2024-09-26","name":"26th International DSM Conference (DSM 2024)","start_date":"2024-09-24","location":"Stuttgart, Germany"},"title":"A Maturity Model for Data-Driven Model-Based Systems Engineering for Producing Companies","status":"public","year":"2024","editor":[{"first_name":"Harold","last_name":"Stowe","full_name":"Stowe, Harold"},{"full_name":"Langner, Christopher","first_name":"Christopher","last_name":"Langner"},{"last_name":"Kreimeyer","first_name":" Matthias","full_name":"Kreimeyer,  Matthias"},{"last_name":"Browning","first_name":"Tyson R.","full_name":"Browning, Tyson R."},{"full_name":" Eppinger, Steven D.","first_name":"Steven D.","last_name":" Eppinger"},{"first_name":"Ali A. ","last_name":"Yassine","full_name":"Yassine, Ali A. "}],"user_id":"44458","doi":"10.35199/dsm2024.13","_id":"56169","series_title":"DSM","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://www.designsociety.org/publication/47703/A+Maturity+Model+for+Data-Driven+Model-Based+Systems+Engineering+for+Producing+Companies"}],"citation":{"short":"D. Tissen, R. Bernijazov, C. Koldewey, R. Dumitrescu, in: H. Stowe, C. Langner,  Matthias Kreimeyer, T.R. Browning, S.D.  Eppinger, A.A. Yassine (Eds.), DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany, 2024.","chicago":"Tissen, Denis, Ruslan Bernijazov, Christian Koldewey, and Roman Dumitrescu. “A Maturity Model for Data-Driven Model-Based Systems Engineering for Producing Companies.” In <i>DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany</i>, edited by Harold Stowe, Christopher Langner,  Matthias Kreimeyer, Tyson R. Browning, Steven D.  Eppinger, and Ali A.  Yassine. DSM, 2024. <a href=\"https://doi.org/10.35199/dsm2024.13\">https://doi.org/10.35199/dsm2024.13</a>.","ieee":"D. Tissen, R. Bernijazov, C. Koldewey, and R. Dumitrescu, “A Maturity Model for Data-Driven Model-Based Systems Engineering for Producing Companies,” in <i>DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany</i>, Stuttgart, Germany, 2024, doi: <a href=\"https://doi.org/10.35199/dsm2024.13\">10.35199/dsm2024.13</a>.","apa":"Tissen, D., Bernijazov, R., Koldewey, C., &#38; Dumitrescu, R. (2024). A Maturity Model for Data-Driven Model-Based Systems Engineering for Producing Companies. In H. Stowe, C. Langner,  Matthias Kreimeyer, T. R. Browning, S. D.  Eppinger, &#38; A. A. Yassine (Eds.), <i>DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany</i>. <a href=\"https://doi.org/10.35199/dsm2024.13\">https://doi.org/10.35199/dsm2024.13</a>","bibtex":"@inproceedings{Tissen_Bernijazov_Koldewey_Dumitrescu_2024, series={DSM}, title={A Maturity Model for Data-Driven Model-Based Systems Engineering for Producing Companies}, DOI={<a href=\"https://doi.org/10.35199/dsm2024.13\">10.35199/dsm2024.13</a>}, booktitle={DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany}, author={Tissen, Denis and Bernijazov, Ruslan and Koldewey, Christian and Dumitrescu, Roman}, editor={Stowe, Harold and Langner, Christopher and Kreimeyer,  Matthias and Browning, Tyson R. and  Eppinger, Steven D. and Yassine, Ali A. }, year={2024}, collection={DSM} }","ama":"Tissen D, Bernijazov R, Koldewey C, Dumitrescu R. A Maturity Model for Data-Driven Model-Based Systems Engineering for Producing Companies. In: Stowe H, Langner C, Kreimeyer  Matthias, Browning TR,  Eppinger SD, Yassine AA, eds. <i>DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany</i>. DSM. ; 2024. doi:<a href=\"https://doi.org/10.35199/dsm2024.13\">10.35199/dsm2024.13</a>","mla":"Tissen, Denis, et al. “A Maturity Model for Data-Driven Model-Based Systems Engineering for Producing Companies.” <i>DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany</i>, edited by Harold Stowe et al., 2024, doi:<a href=\"https://doi.org/10.35199/dsm2024.13\">10.35199/dsm2024.13</a>."},"publication":"DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany","type":"conference","date_created":"2024-09-17T10:05:45Z"},{"citation":{"chicago":"Ried, Dennis. <i>„halb und halb“ – Hybride Edition als Kompromiss? Eine Studie zu Methodik, Möglichkeiten und Grenzen in der hybriden Musikedition am Beispiel der Edition von Ludwig Baumanns „Kantate. Den Gefallenen zum Gedächtnis, den Trauernden zum Trost“</i>. Berlin: Logos-Verlag, 2024. <a href=\"https://doi.org/10.30819/5730\">https://doi.org/10.30819/5730</a>.","short":"D. Ried, „halb und halb“ – Hybride Edition als Kompromiss? Eine Studie zu Methodik, Möglichkeiten und Grenzen in der hybriden Musikedition am Beispiel der Edition von Ludwig Baumanns „Kantate. Den Gefallenen zum Gedächtnis, den Trauernden zum Trost“, Logos-Verlag, Berlin, 2024.","apa":"Ried, D. (2024). <i>„halb und halb“ – Hybride Edition als Kompromiss? Eine Studie zu Methodik, Möglichkeiten und Grenzen in der hybriden Musikedition am Beispiel der Edition von Ludwig Baumanns „Kantate. Den Gefallenen zum Gedächtnis, den Trauernden zum Trost“</i>. Logos-Verlag. <a href=\"https://doi.org/10.30819/5730\">https://doi.org/10.30819/5730</a>","ieee":"D. Ried, <i>„halb und halb“ – Hybride Edition als Kompromiss? Eine Studie zu Methodik, Möglichkeiten und Grenzen in der hybriden Musikedition am Beispiel der Edition von Ludwig Baumanns „Kantate. Den Gefallenen zum Gedächtnis, den Trauernden zum Trost“</i>. Berlin: Logos-Verlag, 2024.","ama":"Ried D. <i>„halb und halb“ – Hybride Edition als Kompromiss? Eine Studie zu Methodik, Möglichkeiten und Grenzen in der hybriden Musikedition am Beispiel der Edition von Ludwig Baumanns „Kantate. Den Gefallenen zum Gedächtnis, den Trauernden zum Trost“</i>. Logos-Verlag; 2024. doi:<a href=\"https://doi.org/10.30819/5730\">10.30819/5730</a>","bibtex":"@book{Ried_2024, place={Berlin}, title={„halb und halb“ – Hybride Edition als Kompromiss? Eine Studie zu Methodik, Möglichkeiten und Grenzen in der hybriden Musikedition am Beispiel der Edition von Ludwig Baumanns „Kantate. Den Gefallenen zum Gedächtnis, den Trauernden zum Trost“}, DOI={<a href=\"https://doi.org/10.30819/5730\">10.30819/5730</a>}, publisher={Logos-Verlag}, author={Ried, Dennis}, year={2024} }","mla":"Ried, Dennis. <i>„halb und halb“ – Hybride Edition als Kompromiss? Eine Studie zu Methodik, Möglichkeiten und Grenzen in der hybriden Musikedition am Beispiel der Edition von Ludwig Baumanns „Kantate. Den Gefallenen zum Gedächtnis, den Trauernden zum Trost“</i>. Logos-Verlag, 2024, doi:<a href=\"https://doi.org/10.30819/5730\">10.30819/5730</a>."},"oa":"1","place":"Berlin","status":"public","user_id":"90722","page":"407","_id":"56153","publisher":"Logos-Verlag","abstract":[{"text":"Vor etwa 20 Jahren haben hybride Editionen in der Musikwissenschaft Einzug gehalten. Es sind in erster Linie Langzeitprojekte mit Laufzeiten von über 15 Jahren (z. ,B. OPERA, RWA, EWK, BAZ-GA) die diese Form der Edition verwenden. Dennoch gibt es kaum Forschungsliteratur zu diesem Thema. Auch die immer wieder verwendete Forschungssoftware \"Edirom\" hat bislang weder eine ausreichende Dokumentation erfahren noch ist sie ausgiebig diskutiert worden. Zudem fehlt eine kritische Betrachtung des Phänomens Önline-Portal\", welches gerade in der Musikphilologie immer häufiger in Erscheinung tritt. Von der Frage ausgehend, ob die hybride Edition ein Kompromiss aus traditioneller und digitaler Edition darstellt, unternimmt Dennis Ried erstmals den Versuch, den Status quo hybrider (Musik-)Editionen zu eruieren, zu dokumentieren und kritisch zu hinterfragen. \"Hybrid\" wird dabei stets als Zusammenspiel von Änalogem\" und \"Digitalem\" betrachtet.\r\n\r\nAnders als traditionelle Dissertationsschriften ist diese Arbeit in zwei Teile gegliedert, wovon der erste aus einer exemplarisch angeführten und quasi eigenständigen wissenschaftlich-kritischen Edition besteht. Im zweiten Teil wird diese dann aktiv in die Theoriebildung eingebunden, um methodische Fragen gezielt erörtern zu können.\r\nErgänzt wird die Dissertationsschrift durch eine auf Zenodo publizierte digitale Datensammlung.","lang":"ger"}],"type":"book","keyword":["Musikwissenschaft","Digitale Edition","Musikphilologie"],"department":[{"_id":"233"},{"_id":"856"}],"date_created":"2024-09-16T16:52:59Z","date_updated":"2024-09-20T08:16:04Z","publication_status":"published","year":"2024","title":"„halb und halb“ – Hybride Edition als Kompromiss? Eine Studie zu Methodik, Möglichkeiten und Grenzen in der hybriden Musikedition am Beispiel der Edition von Ludwig Baumanns „Kantate. Den Gefallenen zum Gedächtnis, den Trauernden zum Trost“","author":[{"id":"90722","full_name":"Ried, Dennis","orcid":"https://orcid.org/0000-0001-5545-2088","last_name":"Ried","first_name":"Dennis"}],"publication_identifier":{"isbn":["978-3-8325-5730-0"]},"doi":"10.30819/5730","main_file_link":[{"url":"https://www.logos-verlag.de/ebooks/OA/978-3-8325-5730-0.pdf","open_access":"1"}],"language":[{"iso":"ger"}]},{"citation":{"ieee":"T. Mamedov <i>et al.</i>, “A conductivity-based flow imaging sensor for the investigation of liquid flow dynamics in stationary and moving separation columns packed with Mellapak 250Y,” presented at the 16th International Conference on Gas–Liquid and Gas–Liquid–Solid Reactor Engineering, Dresden, 2024.","apa":"Mamedov, T., Ehlert, T., Schleicher, E., Dias, F. D. A., Schubert, M., Kenig, E. Y., &#38; Hampel, U. (2024). <i>A conductivity-based flow imaging sensor for the investigation of liquid flow dynamics in stationary and moving separation columns packed with Mellapak 250Y</i>. 16th International Conference on Gas–Liquid and Gas–Liquid–Solid Reactor Engineering, Dresden.","short":"T. Mamedov, T. Ehlert, E. Schleicher, F.D.A. Dias, M. Schubert, E.Y. Kenig, U. Hampel, in: 2024.","chicago":"Mamedov, Tural, Thomas Ehlert, Eckhard Schleicher, Felipe D. A. Dias, Markus Schubert, Eugeny Y. Kenig, and Uwe Hampel. “A Conductivity-Based Flow Imaging Sensor for the Investigation of Liquid Flow Dynamics in Stationary and Moving Separation Columns Packed with Mellapak 250Y,” 2024.","mla":"Mamedov, Tural, et al. <i>A Conductivity-Based Flow Imaging Sensor for the Investigation of Liquid Flow Dynamics in Stationary and Moving Separation Columns Packed with Mellapak 250Y</i>. 2024.","bibtex":"@inproceedings{Mamedov_Ehlert_Schleicher_Dias_Schubert_Kenig_Hampel_2024, title={A conductivity-based flow imaging sensor for the investigation of liquid flow dynamics in stationary and moving separation columns packed with Mellapak 250Y}, author={Mamedov, Tural and Ehlert, Thomas and Schleicher, Eckhard and Dias, Felipe D. A. and Schubert, Markus and Kenig, Eugeny Y. and Hampel, Uwe}, year={2024} }","ama":"Mamedov T, Ehlert T, Schleicher E, et al. A conductivity-based flow imaging sensor for the investigation of liquid flow dynamics in stationary and moving separation columns packed with Mellapak 250Y. In: ; 2024."},"date_created":"2024-10-10T11:56:30Z","type":"conference_abstract","department":[{"_id":"9"},{"_id":"145"}],"title":"A conductivity-based flow imaging sensor for the investigation of liquid flow dynamics in stationary and moving separation columns packed with Mellapak 250Y","status":"public","year":"2024","author":[{"last_name":"Mamedov","first_name":"Tural","full_name":"Mamedov, Tural"},{"full_name":"Ehlert, Thomas","last_name":"Ehlert","first_name":"Thomas","id":"47151"},{"first_name":"Eckhard","last_name":"Schleicher","full_name":"Schleicher, Eckhard"},{"first_name":"Felipe D. A.","last_name":"Dias","full_name":"Dias, Felipe D. A."},{"last_name":"Schubert","first_name":"Markus","full_name":"Schubert, Markus"},{"full_name":"Kenig, Eugeny Y.","first_name":"Eugeny Y.","last_name":"Kenig","id":"665"},{"full_name":"Hampel, Uwe","first_name":"Uwe","last_name":"Hampel"}],"conference":{"start_date":"2024-09-02","name":"16th International Conference on Gas–Liquid and Gas–Liquid–Solid Reactor Engineering","location":"Dresden","end_date":"2024-09-05"},"date_updated":"2024-10-10T12:10:33Z","language":[{"iso":"eng"}],"_id":"56484","user_id":"47151"},{"type":"journal_article","date_created":"2025-01-15T12:13:53Z","abstract":[{"text":"<jats:p> Increasing material costs, decreasing availability, and ever-higher demands on environmental compatibility and complexity require new strategies in the development and production of functional components. Consequently, a combined approach from the areas of design, material science, and manufacturing is mandatory, in order to meet the requirements. Reducing the number of parts, using lightweight materials and applying hybrid components with a multimaterial mix are possible solutions. Nevertheless, conventional joining operations like welding or riveting are reaching their limits in terms of material utilization, load-bearing capacity as well as versatility of the process. Thus, innovative and versatile joining by forming operations and process combinations are focus of current research. In this context, the innovative process of orbital forming had been investigated as a joining by forming operation to manufacture load-adapted hybrid functional components. By tilting of one tool component during the process, a radial material flow is generated, allowing the crimping of the two joining partners. Nevertheless, the load-bearing capacity in axial direction could be identified as limiting factor for a possible application. Therefore, the aim of this investigation is the development of a fundamental process understanding on the influence of a novel geometrical adaption of the joint on the resulting load bearing capacity. The influence of varying geometrical proportions of the joint on the quality is evaluated, considering the form filling, the geometrical properties of the components as well as the maximum transmittable axial load. As joining partners, the dual-phase steel DP600 and the aluminum alloy EN AW-5754 with a thickness of 2.0 mm are used. </jats:p>","lang":"eng"}],"publication":"Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering","citation":{"ieee":"A. Hetzel, S. Wituschek, D. Römisch, F. Sippel, M. Lechner, and M. Merklein, “Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming,” <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>, 2024, doi: <a href=\"https://doi.org/10.1177/09544089241282807\">10.1177/09544089241282807</a>.","apa":"Hetzel, A., Wituschek, S., Römisch, D., Sippel, F., Lechner, M., &#38; Merklein, M. (2024). Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming. <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>. <a href=\"https://doi.org/10.1177/09544089241282807\">https://doi.org/10.1177/09544089241282807</a>","short":"A. Hetzel, S. Wituschek, D. Römisch, F. Sippel, M. Lechner, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).","chicago":"Hetzel, A., S. Wituschek, D. Römisch, F. Sippel, M. Lechner, and M. Merklein. “Investigation on the Load-Bearing Capacity and Joint Formation of Hybrid Functional Components Joined by Orbital Forming.” <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>, 2024. <a href=\"https://doi.org/10.1177/09544089241282807\">https://doi.org/10.1177/09544089241282807</a>.","mla":"Hetzel, A., et al. “Investigation on the Load-Bearing Capacity and Joint Formation of Hybrid Functional Components Joined by Orbital Forming.” <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>, SAGE Publications, 2024, doi:<a href=\"https://doi.org/10.1177/09544089241282807\">10.1177/09544089241282807</a>.","bibtex":"@article{Hetzel_Wituschek_Römisch_Sippel_Lechner_Merklein_2024, title={Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming}, DOI={<a href=\"https://doi.org/10.1177/09544089241282807\">10.1177/09544089241282807</a>}, journal={Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering}, publisher={SAGE Publications}, author={Hetzel, A. and Wituschek, S. and Römisch, D. and Sippel, F. and Lechner, M. and Merklein, M.}, year={2024} }","ama":"Hetzel A, Wituschek S, Römisch D, Sippel F, Lechner M, Merklein M. Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming. <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>. Published online 2024. doi:<a href=\"https://doi.org/10.1177/09544089241282807\">10.1177/09544089241282807</a>"},"doi":"10.1177/09544089241282807","user_id":"83423","_id":"58192","publisher":"SAGE Publications","language":[{"iso":"eng"}],"date_updated":"2025-01-15T12:15:04Z","publication_status":"published","title":"Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming","year":"2024","status":"public","publication_identifier":{"issn":["0954-4089","2041-3009"]},"author":[{"full_name":"Hetzel, A.","last_name":"Hetzel","first_name":"A."},{"first_name":"S.","last_name":"Wituschek","full_name":"Wituschek, S."},{"first_name":"D.","last_name":"Römisch","full_name":"Römisch, D."},{"full_name":"Sippel, F.","first_name":"F.","last_name":"Sippel"},{"full_name":"Lechner, M.","first_name":"M.","last_name":"Lechner"},{"full_name":"Merklein, M.","first_name":"M.","last_name":"Merklein"}]},{"publication":"Small","citation":{"chicago":"Groll, Maja, Julius Bürger, Ioannis Caltzidis, Klaus D. Jöns, Wolf Gero Schmidt, Uwe Gerstmann, and Jörg K. N. Lindner. “DFT‐Assisted Investigation of the Electric Field and Charge Density Distribution of Pristine and Defective 2D WSe<sub>2</sub> by Differential Phase Contrast Imaging.” <i>Small</i>, 2024. <a href=\"https://doi.org/10.1002/smll.202311635\">https://doi.org/10.1002/smll.202311635</a>.","short":"M. Groll, J. Bürger, I. Caltzidis, K.D. Jöns, W.G. Schmidt, U. Gerstmann, J.K.N. Lindner, Small (2024).","ieee":"M. Groll <i>et al.</i>, “DFT‐Assisted Investigation of the Electric Field and Charge Density Distribution of Pristine and Defective 2D WSe<sub>2</sub> by Differential Phase Contrast Imaging,” <i>Small</i>, 2024, doi: <a href=\"https://doi.org/10.1002/smll.202311635\">10.1002/smll.202311635</a>.","apa":"Groll, M., Bürger, J., Caltzidis, I., Jöns, K. D., Schmidt, W. G., Gerstmann, U., &#38; Lindner, J. K. N. (2024). DFT‐Assisted Investigation of the Electric Field and Charge Density Distribution of Pristine and Defective 2D WSe<sub>2</sub> by Differential Phase Contrast Imaging. <i>Small</i>. <a href=\"https://doi.org/10.1002/smll.202311635\">https://doi.org/10.1002/smll.202311635</a>","bibtex":"@article{Groll_Bürger_Caltzidis_Jöns_Schmidt_Gerstmann_Lindner_2024, title={DFT‐Assisted Investigation of the Electric Field and Charge Density Distribution of Pristine and Defective 2D WSe<sub>2</sub> by Differential Phase Contrast Imaging}, DOI={<a href=\"https://doi.org/10.1002/smll.202311635\">10.1002/smll.202311635</a>}, journal={Small}, publisher={Wiley}, author={Groll, Maja and Bürger, Julius and Caltzidis, Ioannis and Jöns, Klaus D. and Schmidt, Wolf Gero and Gerstmann, Uwe and Lindner, Jörg K. N.}, year={2024} }","ama":"Groll M, Bürger J, Caltzidis I, et al. DFT‐Assisted Investigation of the Electric Field and Charge Density Distribution of Pristine and Defective 2D WSe<sub>2</sub> by Differential Phase Contrast Imaging. <i>Small</i>. Published online 2024. doi:<a href=\"https://doi.org/10.1002/smll.202311635\">10.1002/smll.202311635</a>","mla":"Groll, Maja, et al. “DFT‐Assisted Investigation of the Electric Field and Charge Density Distribution of Pristine and Defective 2D WSe<sub>2</sub> by Differential Phase Contrast Imaging.” <i>Small</i>, Wiley, 2024, doi:<a href=\"https://doi.org/10.1002/smll.202311635\">10.1002/smll.202311635</a>."},"abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>Most properties of solid materials are defined by their internal electric field and charge density distributions which so far are difficult to measure with high spatial resolution. Especially for 2D materials, the atomic electric fields influence the optoelectronic properties. In this study, the atomic‐scale electric field and charge density distribution of WSe<jats:sub>2</jats:sub> bi‐ and trilayers are revealed using an emerging microscopy technique, differential phase contrast (DPC) imaging in scanning transmission electron microscopy (STEM). For pristine material, a higher positive charge density located at the selenium atomic columns compared to the tungsten atomic columns is obtained and tentatively explained by a coherent scattering effect. Furthermore, the change in the electric field distribution induced by a missing selenium atomic column is investigated. A characteristic electric field distribution in the vicinity of the defect with locally reduced magnitudes compared to the pristine lattice is observed. This effect is accompanied by a considerable inward relaxation of the surrounding lattice, which according to first principles DFT calculation is fully compatible with a missing column of Se atoms. This shows that DPC imaging, as an electric field sensitive technique, provides additional and remarkable information to the otherwise only structural analysis obtained with conventional STEM imaging.</jats:p>","lang":"eng"}],"date_created":"2024-05-10T08:45:43Z","type":"journal_article","department":[{"_id":"286"},{"_id":"15"}],"status":"public","title":"DFT‐Assisted Investigation of the Electric Field and Charge Density Distribution of Pristine and Defective 2D WSe<sub>2</sub> by Differential Phase Contrast Imaging","year":"2024","author":[{"full_name":"Groll, Maja","last_name":"Groll","first_name":"Maja"},{"first_name":"Julius","last_name":"Bürger","full_name":"Bürger, Julius"},{"first_name":"Ioannis","last_name":"Caltzidis","full_name":"Caltzidis, Ioannis"},{"full_name":"Jöns, Klaus D.","first_name":"Klaus D.","last_name":"Jöns"},{"first_name":"Wolf Gero","last_name":"Schmidt","full_name":"Schmidt, Wolf Gero"},{"full_name":"Gerstmann, Uwe","last_name":"Gerstmann","first_name":"Uwe"},{"last_name":"Lindner","first_name":"Jörg K. N.","full_name":"Lindner, Jörg K. N."}],"publication_identifier":{"issn":["1613-6810","1613-6829"]},"date_updated":"2025-01-22T09:06:46Z","publication_status":"published","publisher":"Wiley","_id":"54147","language":[{"iso":"eng"}],"doi":"10.1002/smll.202311635","user_id":"77496"},{"date_updated":"2025-01-29T13:02:41Z","publication_status":"published","year":"2024","title":"Der Einzug der Mathematik in die Bildungspläne der höheren Mädchenschulen zu Beginn des 20. Jahrhunderts","status":"public","conference":{"end_date":"2024-03-08","location":"Essen","start_date":"2024-03-04","name":"57. Jahretagunt der Gesellschaft für Didaktik der Mathematik"},"author":[{"id":"578","full_name":"Werth, Gerda","last_name":"Werth","first_name":"Gerda"}],"doi":"https://doi.org/10.37626/GA9783959872782.0","user_id":"578","page":"1505-1508","language":[{"iso":"eng"}],"_id":"58391","publication":"Beiträge zum Mathematikunterricht 2024","citation":{"bibtex":"@inproceedings{Werth_2024, title={Der Einzug der Mathematik in die Bildungspläne der höheren Mädchenschulen zu Beginn des 20. Jahrhunderts}, DOI={<a href=\"https://doi.org/10.37626/GA9783959872782.0\">https://doi.org/10.37626/GA9783959872782.0</a>}, booktitle={Beiträge zum Mathematikunterricht 2024}, author={Werth, Gerda}, year={2024}, pages={1505–1508} }","ama":"Werth G. Der Einzug der Mathematik in die Bildungspläne der höheren Mädchenschulen zu Beginn des 20. Jahrhunderts. In: <i>Beiträge Zum Mathematikunterricht 2024</i>. ; 2024:1505-1508. doi:<a href=\"https://doi.org/10.37626/GA9783959872782.0\">https://doi.org/10.37626/GA9783959872782.0</a>","mla":"Werth, Gerda. “Der Einzug Der Mathematik in Die Bildungspläne Der Höheren Mädchenschulen Zu Beginn Des 20. Jahrhunderts.” <i>Beiträge Zum Mathematikunterricht 2024</i>, 2024, pp. 1505–08, doi:<a href=\"https://doi.org/10.37626/GA9783959872782.0\">https://doi.org/10.37626/GA9783959872782.0</a>.","chicago":"Werth, Gerda. “Der Einzug Der Mathematik in Die Bildungspläne Der Höheren Mädchenschulen Zu Beginn Des 20. Jahrhunderts.” In <i>Beiträge Zum Mathematikunterricht 2024</i>, 1505–8, 2024. <a href=\"https://doi.org/10.37626/GA9783959872782.0\">https://doi.org/10.37626/GA9783959872782.0</a>.","short":"G. Werth, in: Beiträge Zum Mathematikunterricht 2024, 2024, pp. 1505–1508.","ieee":"G. Werth, “Der Einzug der Mathematik in die Bildungspläne der höheren Mädchenschulen zu Beginn des 20. Jahrhunderts,” in <i>Beiträge zum Mathematikunterricht 2024</i>, Essen, 2024, pp. 1505–1508, doi: <a href=\"https://doi.org/10.37626/GA9783959872782.0\">https://doi.org/10.37626/GA9783959872782.0</a>.","apa":"Werth, G. (2024). Der Einzug der Mathematik in die Bildungspläne der höheren Mädchenschulen zu Beginn des 20. Jahrhunderts. <i>Beiträge Zum Mathematikunterricht 2024</i>, 1505–1508. <a href=\"https://doi.org/10.37626/GA9783959872782.0\">https://doi.org/10.37626/GA9783959872782.0</a>"},"type":"conference","department":[{"_id":"34"},{"_id":"10"},{"_id":"98"},{"_id":"360"}],"date_created":"2025-01-29T13:01:31Z"},{"abstract":[{"text":"This study presents a numerical approach using a 3D finite element model to quantify the remaining clamp load of a plastic nut joint after a specific time. The viscoelastic relaxation of a thermoplastic nut, which is predominantly screwed on a welding stud, is described by a material card using Prony Series. Prony Series are derived from experimental Dynamical Mechanical Analysis with different moisture and fiber contents of the thermoplastic. Since plastic nuts usually do not have preformed threads, the increased temperatures and resulting stresses from the thread-forming process are considered in the simulation. Firstly, the FE model is verified by substrate stress relaxation tests. Subsequently, experimental clamp load measurements with miniature compression load cells verify the clamp load prediction. Finally, the developed model is used to analyze the clamp load distribution within the threads","lang":"eng"}],"citation":{"mla":"Wippermann, Jan, and Gerson Meschut. <i>Numerical Modeling of Clamp Load Relaxation of Plastic Nuts under Varying Moisture and Fiber Content</i>. Springer Science and Business Media LLC, 2024.","ama":"Wippermann J, Meschut G. Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber content. Published online 2024.","bibtex":"@article{Wippermann_Meschut_2024, title={Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber content}, publisher={Springer Science and Business Media LLC}, author={Wippermann, Jan and Meschut, Gerson}, year={2024} }","apa":"Wippermann, J., &#38; Meschut, G. (2024). <i>Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber content</i>. Springer Science and Business Media LLC.","ieee":"J. Wippermann and G. Meschut, “Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber content.” Springer Science and Business Media LLC, 2024.","chicago":"Wippermann, Jan, and Gerson Meschut. “Numerical Modeling of Clamp Load Relaxation of Plastic Nuts under Varying Moisture and Fiber Content.” Springer Science and Business Media LLC, 2024.","short":"J. Wippermann, G. Meschut, (2024)."},"type":"preprint","department":[{"_id":"157"}],"date_created":"2025-01-30T14:30:09Z","publication_status":"published","date_updated":"2025-01-30T14:41:17Z","title":"Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber content","status":"public","year":"2024","author":[{"id":"55686","full_name":"Wippermann, Jan","first_name":"Jan","orcid":"0000-0002-5013-853X","last_name":"Wippermann"},{"full_name":"Meschut, Gerson","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","id":"32056"}],"user_id":"55686","language":[{"iso":"eng"}],"_id":"58441","publisher":"Springer Science and Business Media LLC"},{"type":"conference","department":[{"_id":"563"}],"date_created":"2025-01-31T13:24:03Z","publication":"Proceedings R&D Management Conference","citation":{"apa":"Schreiner, N., de Oliveira, F., Trienens, M., Kürpick, C., Asmar, L., Kühn, A., &#38; Dumitrescu, R. (2024). Corporate Emission Profiles: Analyzing the 160 largest German Companies. <i>Proceedings R&#38;D Management Conference</i>. R&#38;D Management Conference 2024. <a href=\"https://doi.org/10.24406/PUBLICA-3609\">https://doi.org/10.24406/PUBLICA-3609</a>","mla":"Schreiner, Nick, et al. “Corporate Emission Profiles: Analyzing the 160 Largest German Companies.” <i>Proceedings R&#38;D Management Conference</i>, LibreCat University, 2024, doi:<a href=\"https://doi.org/10.24406/PUBLICA-3609\">10.24406/PUBLICA-3609</a>.","ieee":"N. Schreiner <i>et al.</i>, “Corporate Emission Profiles: Analyzing the 160 largest German Companies,” presented at the R&#38;D Management Conference 2024, 2024, doi: <a href=\"https://doi.org/10.24406/PUBLICA-3609\">10.24406/PUBLICA-3609</a>.","chicago":"Schreiner, Nick, FM de Oliveira, Malte Trienens, Christian Kürpick, Laban Asmar, Arno Kühn, and Roman Dumitrescu. “Corporate Emission Profiles: Analyzing the 160 Largest German Companies.” In <i>Proceedings R&#38;D Management Conference</i>. LibreCat University, 2024. <a href=\"https://doi.org/10.24406/PUBLICA-3609\">https://doi.org/10.24406/PUBLICA-3609</a>.","short":"N. Schreiner, F. de Oliveira, M. Trienens, C. Kürpick, L. Asmar, A. Kühn, R. Dumitrescu, in: Proceedings R&#38;D Management Conference, LibreCat University, 2024.","ama":"Schreiner N, de Oliveira F, Trienens M, et al. Corporate Emission Profiles: Analyzing the 160 largest German Companies. In: <i>Proceedings R&#38;D Management Conference</i>. LibreCat University; 2024. doi:<a href=\"https://doi.org/10.24406/PUBLICA-3609\">10.24406/PUBLICA-3609</a>","bibtex":"@inproceedings{Schreiner_de Oliveira_Trienens_Kürpick_Asmar_Kühn_Dumitrescu_2024, title={Corporate Emission Profiles: Analyzing the 160 largest German Companies}, DOI={<a href=\"https://doi.org/10.24406/PUBLICA-3609\">10.24406/PUBLICA-3609</a>}, booktitle={Proceedings R&#38;D Management Conference}, publisher={LibreCat University}, author={Schreiner, Nick and de Oliveira, FM and Trienens, Malte and Kürpick, Christian and Asmar, Laban and Kühn, Arno and Dumitrescu, Roman}, year={2024} }"},"doi":"10.24406/PUBLICA-3609","user_id":"15782","language":[{"iso":"eng"}],"_id":"58469","publisher":"LibreCat University","date_updated":"2025-01-31T13:27:26Z","year":"2024","title":"Corporate Emission Profiles: Analyzing the 160 largest German Companies","status":"public","conference":{"name":"R&D Management Conference 2024"},"author":[{"full_name":"Schreiner, Nick","first_name":"Nick","last_name":"Schreiner"},{"full_name":"de Oliveira, FM","last_name":"de Oliveira","first_name":"FM"},{"first_name":"Malte","last_name":"Trienens","full_name":"Trienens, Malte"},{"full_name":"Kürpick, Christian","first_name":"Christian","last_name":"Kürpick"},{"full_name":"Asmar, Laban","last_name":"Asmar","first_name":"Laban"},{"first_name":"Arno","last_name":"Kühn","full_name":"Kühn, Arno"},{"id":"16190","last_name":"Dumitrescu","first_name":"Roman","full_name":"Dumitrescu, Roman"}]},{"language":[{"iso":"eng"}],"article_number":"157","doi":"10.3390/jmmp8040157","author":[{"full_name":"Friedlein, Johannes","first_name":"Johannes","last_name":"Friedlein"},{"full_name":"Böhnke, Max","last_name":"Böhnke","first_name":"Max"},{"full_name":"Schlichter, Malte","first_name":"Malte","last_name":"Schlichter"},{"full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias"},{"first_name":"Gerson","last_name":"Meschut","full_name":"Meschut, Gerson"},{"last_name":"Mergheim","first_name":"Julia","full_name":"Mergheim, Julia"},{"last_name":"Steinmann","first_name":"Paul","full_name":"Steinmann, Paul"}],"publication_identifier":{"issn":["2504-4494"]},"title":"Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining","year":"2024","intvolume":"         8","publication_status":"published","date_updated":"2025-01-31T17:03:34Z","date_created":"2025-01-31T16:59:13Z","keyword":["ductile damage","stress-state dependency","failure","parameter identification","punch test","clinching"],"type":"journal_article","publication":"Journal of Manufacturing and Materials Processing","issue":"4","abstract":[{"text":"<jats:p>Similar to bulk metal forming, clinch joining is characterised by large plastic deformations and a variety of different 3D stress states, including severe compression. However, inherent to plastic forming is the nucleation and growth of defects, whose detrimental effects on the material behaviour can be described by continuum damage models and eventually lead to material failure. As the damage evolution strongly depends on the stress state, a stress-state-dependent model is utilised to correctly track the accumulation. To formulate and parameterise this model, besides classical experiments, so-called modified punch tests are also integrated herein to enhance the calibration of the failure model by capturing a larger range of stress states and metal-forming-specific loading conditions. Moreover, when highly ductile materials are considered, such as the dual-phase steel HCT590X and the aluminium alloy EN AW-6014 T4 investigated here, strong necking and localisation might occur prior to fracture. This can alter the stress state and affect the actual strain at failure. This influence is captured by coupling plasticity and damage to incorporate the damage-induced softening effect. Its relative importance is shown by conducting inverse parameter identifications to determine damage and failure parameters for both mentioned ductile metals based on up to 12 different experiments.</jats:p>","lang":"eng"}],"_id":"58491","publisher":"MDPI AG","volume":8,"user_id":"84990","status":"public","citation":{"ama":"Friedlein J, Böhnke M, Schlichter M, et al. Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining. <i>Journal of Manufacturing and Materials Processing</i>. 2024;8(4). doi:<a href=\"https://doi.org/10.3390/jmmp8040157\">10.3390/jmmp8040157</a>","bibtex":"@article{Friedlein_Böhnke_Schlichter_Bobbert_Meschut_Mergheim_Steinmann_2024, title={Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining}, volume={8}, DOI={<a href=\"https://doi.org/10.3390/jmmp8040157\">10.3390/jmmp8040157</a>}, number={4157}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Friedlein, Johannes and Böhnke, Max and Schlichter, Malte and Bobbert, Mathias and Meschut, Gerson and Mergheim, Julia and Steinmann, Paul}, year={2024} }","mla":"Friedlein, Johannes, et al. “Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining.” <i>Journal of Manufacturing and Materials Processing</i>, vol. 8, no. 4, 157, MDPI AG, 2024, doi:<a href=\"https://doi.org/10.3390/jmmp8040157\">10.3390/jmmp8040157</a>.","short":"J. Friedlein, M. Böhnke, M. Schlichter, M. Bobbert, G. Meschut, J. Mergheim, P. Steinmann, Journal of Manufacturing and Materials Processing 8 (2024).","chicago":"Friedlein, Johannes, Max Böhnke, Malte Schlichter, Mathias Bobbert, Gerson Meschut, Julia Mergheim, and Paul Steinmann. “Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining.” <i>Journal of Manufacturing and Materials Processing</i> 8, no. 4 (2024). <a href=\"https://doi.org/10.3390/jmmp8040157\">https://doi.org/10.3390/jmmp8040157</a>.","apa":"Friedlein, J., Böhnke, M., Schlichter, M., Bobbert, M., Meschut, G., Mergheim, J., &#38; Steinmann, P. (2024). Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining. <i>Journal of Manufacturing and Materials Processing</i>, <i>8</i>(4), Article 157. <a href=\"https://doi.org/10.3390/jmmp8040157\">https://doi.org/10.3390/jmmp8040157</a>","ieee":"J. Friedlein <i>et al.</i>, “Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining,” <i>Journal of Manufacturing and Materials Processing</i>, vol. 8, no. 4, Art. no. 157, 2024, doi: <a href=\"https://doi.org/10.3390/jmmp8040157\">10.3390/jmmp8040157</a>."},"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"139","name":"TRR 285 – A05: TRR 285 - Subproject A05"}]},{"has_accepted_license":"1","status":"public","editor":[{"full_name":"Lindgren, R.","first_name":"R.","last_name":"Lindgren"},{"full_name":"Asino, T. I.","last_name":"Asino","first_name":"T. I."},{"full_name":"Kyza, E. A.","first_name":"E. A.","last_name":"Kyza"},{"full_name":"Looi, C. K.","last_name":"Looi","first_name":"C. K."},{"full_name":"Keifert, D. T.","last_name":"Keifert","first_name":"D. T."},{"first_name":"E.","last_name":"Suárez","full_name":"Suárez, E."}],"ddc":["510"],"user_id":"37888","_id":"59467","publisher":"International Society of the Learning Sciences","page":"1863-1870","citation":{"chicago":"Miller, Katherine M, Joseph L Polman, Susan A Yoon, Jooeun Shim, Vivian Y Leung, Yen Nguyen, Andee Rubin, et al. “Data and Social Worlds: How Data Science Education Supports Civic Participation and Social Discourse.” In <i>Proceedings of the 18th International Conference of the Learning Sciences-ICLS 2024</i>, edited by R. Lindgren, T. I. Asino, E. A. Kyza, C. K. Looi, D. T. Keifert, and E. Suárez, 1863–70. International Society of the Learning Sciences, 2024.","short":"K.M. Miller, J.L. Polman, S.A. Yoon, J. Shim, V.Y. Leung, Y. Nguyen, A. Rubin, T. Higgins, J.M. Karch, J.K. Hammerman, C. Matuk, K. DesPortes, A. Amato, S. Dikker, X. Ochoa, E. Romero, S. Podworny, Y. Fleischer, R. Biehler, J.T. Walker, A. Barany, A. Acquah, A. Scarola, S. Reza, T.C. Tran, R. Vacca, M. Silander, P.J. Woods, C. Fernandez, A. Eloy, P. Blikstein, R. de Deus Lopes, J. Radinsky, I. Tabak, V.R. Lee, D. Demszky, S. Levine, J. Louie, in: R. Lindgren, T.I. Asino, E.A. Kyza, C.K. Looi, D.T. Keifert, E. Suárez (Eds.), Proceedings of the 18th International Conference of the Learning Sciences-ICLS 2024, International Society of the Learning Sciences, 2024, pp. 1863–1870.","ieee":"K. M. Miller <i>et al.</i>, “Data and Social Worlds: How Data Science Education Supports Civic Participation and Social Discourse,” in <i>Proceedings of the 18th International Conference of the Learning Sciences-ICLS 2024</i>, 2024, pp. 1863–1870.","apa":"Miller, K. M., Polman, J. L., Yoon, S. A., Shim, J., Leung, V. Y., Nguyen, Y., Rubin, A., Higgins, T., Karch, J. M., Hammerman, J. K., Matuk, C., DesPortes, K., Amato, A., Dikker, S., Ochoa, X., Romero, E., Podworny, S., Fleischer, Y., Biehler, R., … Louie, J. (2024). Data and Social Worlds: How Data Science Education Supports Civic Participation and Social Discourse. In R. Lindgren, T. I. Asino, E. A. Kyza, C. K. Looi, D. T. Keifert, &#38; E. Suárez (Eds.), <i>Proceedings of the 18th International Conference of the Learning Sciences-ICLS 2024</i> (pp. 1863–1870). International Society of the Learning Sciences.","bibtex":"@inproceedings{Miller_Polman_Yoon_Shim_Leung_Nguyen_Rubin_Higgins_Karch_Hammerman_et al._2024, title={Data and Social Worlds: How Data Science Education Supports Civic Participation and Social Discourse}, booktitle={Proceedings of the 18th International Conference of the Learning Sciences-ICLS 2024}, publisher={International Society of the Learning Sciences}, author={Miller, Katherine M and Polman, Joseph L and Yoon, Susan A and Shim, Jooeun and Leung, Vivian Y and Nguyen, Yen and Rubin, Andee and Higgins, Traci and Karch, Jessica M and Hammerman, James KL and et al.}, editor={Lindgren, R. and Asino, T. I. and Kyza, E. A. and Looi, C. K. and Keifert, D. T. and Suárez, E.}, year={2024}, pages={1863–1870} }","ama":"Miller KM, Polman JL, Yoon SA, et al. Data and Social Worlds: How Data Science Education Supports Civic Participation and Social Discourse. In: Lindgren R, Asino TI, Kyza EA, Looi CK, Keifert DT, Suárez E, eds. <i>Proceedings of the 18th International Conference of the Learning Sciences-ICLS 2024</i>. International Society of the Learning Sciences; 2024:1863-1870.","mla":"Miller, Katherine M., et al. “Data and Social Worlds: How Data Science Education Supports Civic Participation and Social Discourse.” <i>Proceedings of the 18th International Conference of the Learning Sciences-ICLS 2024</i>, edited by R. Lindgren et al., International Society of the Learning Sciences, 2024, pp. 1863–70."},"file_date_updated":"2025-04-10T07:44:19Z","oa":"1","date_updated":"2025-04-10T09:12:03Z","author":[{"full_name":"Miller, Katherine M","first_name":"Katherine M","last_name":"Miller"},{"full_name":"Polman, Joseph L","first_name":"Joseph L","last_name":"Polman"},{"full_name":"Yoon, Susan A","last_name":"Yoon","first_name":"Susan A"},{"first_name":"Jooeun","last_name":"Shim","full_name":"Shim, Jooeun"},{"first_name":"Vivian Y","last_name":"Leung","full_name":"Leung, Vivian Y"},{"full_name":"Nguyen, Yen","last_name":"Nguyen","first_name":"Yen"},{"full_name":"Rubin, Andee","first_name":"Andee","last_name":"Rubin"},{"last_name":"Higgins","first_name":"Traci","full_name":"Higgins, Traci"},{"first_name":"Jessica M","last_name":"Karch","full_name":"Karch, Jessica M"},{"first_name":"James KL","last_name":"Hammerman","full_name":"Hammerman, James KL"},{"full_name":"Matuk, Camillia","first_name":"Camillia","last_name":"Matuk"},{"first_name":"Kayla","last_name":"DesPortes","full_name":"DesPortes, Kayla"},{"first_name":"Anna","last_name":"Amato","full_name":"Amato, Anna"},{"first_name":"Suzanne","last_name":"Dikker","full_name":"Dikker, Suzanne"},{"full_name":"Ochoa, Xavier","first_name":"Xavier","last_name":"Ochoa"},{"last_name":"Romero","first_name":"Esteban","full_name":"Romero, Esteban"},{"id":"30619","full_name":"Podworny, Susanne","first_name":"Susanne","orcid":"0000-0002-6313-5987","last_name":"Podworny"},{"full_name":"Fleischer, Yannik","orcid":"https://orcid.org/0000-0003-0318-0329","first_name":"Yannik","last_name":"Fleischer","id":"42660"},{"id":"16274","full_name":"Biehler, Rolf","last_name":"Biehler","first_name":"Rolf"},{"first_name":"Justice T.","last_name":"Walker","full_name":"Walker, Justice T."},{"first_name":"Amanda","last_name":"Barany","full_name":"Barany, Amanda"},{"first_name":"Alex","last_name":"Acquah","full_name":"Acquah, Alex"},{"first_name":"Andi","last_name":"Scarola","full_name":"Scarola, Andi"},{"last_name":"Reza","first_name":"Sayed","full_name":"Reza, Sayed"},{"full_name":"Tran, Trang C.","last_name":"Tran","first_name":"Trang C."},{"full_name":"Vacca, Ralph","last_name":"Vacca","first_name":"Ralph"},{"full_name":"Silander, Megan","first_name":"Megan","last_name":"Silander"},{"last_name":"Woods","first_name":"Peter J.","full_name":"Woods, Peter J."},{"last_name":"Fernandez","first_name":"Cassia","full_name":"Fernandez, Cassia"},{"full_name":"Eloy, Adelmo","first_name":"Adelmo","last_name":"Eloy"},{"first_name":"Paulo","last_name":"Blikstein","full_name":"Blikstein, Paulo"},{"full_name":"de Deus Lopes, Roseli","first_name":"Roseli","last_name":"de Deus Lopes"},{"last_name":"Radinsky","first_name":"Josh","full_name":"Radinsky, Josh"},{"full_name":"Tabak, Iris","first_name":"Iris","last_name":"Tabak"},{"last_name":"Lee","first_name":"Victor R.","full_name":"Lee, Victor R."},{"full_name":"Demszky, Dorottya","first_name":"Dorottya","last_name":"Demszky"},{"full_name":"Levine, Sarah","first_name":"Sarah","last_name":"Levine"},{"last_name":"Louie","first_name":"Josephine","full_name":"Louie, Josephine"}],"year":"2024","title":"Data and Social Worlds: How Data Science Education Supports Civic Participation and Social Discourse","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://repository.isls.org/handle/1/10830","open_access":"1"}],"publication":"Proceedings of the 18th International Conference of the Learning Sciences-ICLS 2024","department":[{"_id":"363"}],"type":"conference","date_created":"2025-04-10T07:38:59Z","file":[{"file_size":343448,"access_level":"closed","file_name":"ICLS2024_1863-1870.pdf","date_updated":"2025-04-10T07:44:19Z","relation":"main_file","success":1,"content_type":"application/pdf","file_id":"59470","creator":"krueter","date_created":"2025-04-10T07:44:19Z"}]},{"doi":"10.1371/journal.pone.0296976","article_number":"e0296976","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2025-04-11T06:00:09Z","intvolume":"        19","title":"Regional variations in vaccination against COVID-19 in Germany","year":"2024","author":[{"id":"3206","full_name":"Bade, Verena","last_name":"Bade","first_name":"Verena"},{"id":"48879","full_name":"Schmitz, Hendrik","first_name":"Hendrik","last_name":"Schmitz"},{"full_name":"Tawiah, Beatrice Baaba","last_name":"Tawiah","first_name":"Beatrice Baaba"}],"publication_identifier":{"issn":["1932-6203"]},"type":"journal_article","department":[{"_id":"281"},{"_id":"475"}],"date_created":"2025-04-04T10:44:50Z","abstract":[{"text":"<jats:p>Vaccination willingness against COVID-19 is generally perceived as low. Moreover, there is large heterogeneity across and within countries. As a whole, Germany has average vaccination rates compared to other industrialized countries. However, vaccination rates in the 16 different German federal states differ by more than 20 percentage points. We describe variation in vaccination rates on the level of the 400 German counties using data on all vaccinations carried out until December 2022. Around 52-72% of that variation can be explained by regional differences in demographic characteristics, housing, education and political party preferences. We find indications that the remaining part may be due to differences in soft factors such as risk aversion, trust in the German government, trust in science, and beliefs in conspiracy theories regarding the origins of the Corona virus. We conclude that improving the trust in science and the fight against conspiracy theories may possibly be effective tools to improve vaccination rates and effectively fight pandemics.</jats:p>","lang":"eng"}],"publication":"PLOS ONE","issue":"4","user_id":"37953","volume":19,"_id":"59346","publisher":"Public Library of Science (PLoS)","status":"public","citation":{"bibtex":"@article{Bade_Schmitz_Tawiah_2024, title={Regional variations in vaccination against COVID-19 in Germany}, volume={19}, DOI={<a href=\"https://doi.org/10.1371/journal.pone.0296976\">10.1371/journal.pone.0296976</a>}, number={4e0296976}, journal={PLOS ONE}, publisher={Public Library of Science (PLoS)}, author={Bade, Verena and Schmitz, Hendrik and Tawiah, Beatrice Baaba}, year={2024} }","ama":"Bade V, Schmitz H, Tawiah BB. Regional variations in vaccination against COVID-19 in Germany. <i>PLOS ONE</i>. 2024;19(4). doi:<a href=\"https://doi.org/10.1371/journal.pone.0296976\">10.1371/journal.pone.0296976</a>","mla":"Bade, Verena, et al. “Regional Variations in Vaccination against COVID-19 in Germany.” <i>PLOS ONE</i>, vol. 19, no. 4, e0296976, Public Library of Science (PLoS), 2024, doi:<a href=\"https://doi.org/10.1371/journal.pone.0296976\">10.1371/journal.pone.0296976</a>.","chicago":"Bade, Verena, Hendrik Schmitz, and Beatrice Baaba Tawiah. “Regional Variations in Vaccination against COVID-19 in Germany.” <i>PLOS ONE</i> 19, no. 4 (2024). <a href=\"https://doi.org/10.1371/journal.pone.0296976\">https://doi.org/10.1371/journal.pone.0296976</a>.","short":"V. Bade, H. Schmitz, B.B. Tawiah, PLOS ONE 19 (2024).","ieee":"V. Bade, H. Schmitz, and B. B. Tawiah, “Regional variations in vaccination against COVID-19 in Germany,” <i>PLOS ONE</i>, vol. 19, no. 4, Art. no. e0296976, 2024, doi: <a href=\"https://doi.org/10.1371/journal.pone.0296976\">10.1371/journal.pone.0296976</a>.","apa":"Bade, V., Schmitz, H., &#38; Tawiah, B. B. (2024). Regional variations in vaccination against COVID-19 in Germany. <i>PLOS ONE</i>, <i>19</i>(4), Article e0296976. <a href=\"https://doi.org/10.1371/journal.pone.0296976\">https://doi.org/10.1371/journal.pone.0296976</a>"}},{"language":[{"iso":"eng"}],"doi":"10.1007/s00421-024-05471-w","year":"2024","title":"Eight weeks of high-intensity interval training versus stretching do not change the psychoneuroendocrine response to a social stress test in emotionally impulsive humans","publication_identifier":{"issn":["1439-6319","1439-6327"]},"author":[{"full_name":"Javelle, F.","first_name":"F.","last_name":"Javelle"},{"last_name":"Bloch","first_name":"W.","full_name":"Bloch, W."},{"full_name":"Borges, U.","last_name":"Borges","first_name":"U."},{"full_name":"Burberg, T.","first_name":"T.","last_name":"Burberg"},{"full_name":"Collins, B.","first_name":"B.","last_name":"Collins"},{"last_name":"Gunasekara","first_name":"N.","full_name":"Gunasekara, N."},{"first_name":"T. J.","last_name":"Hosang","full_name":"Hosang, T. J."},{"last_name":"Jacobsen","first_name":"T.","full_name":"Jacobsen, T."},{"full_name":"Laborde, S.","first_name":"S.","last_name":"Laborde"},{"full_name":"Löw, A.","last_name":"Löw","first_name":"A."},{"first_name":"A.","last_name":"Schenk","full_name":"Schenk, A."},{"id":"117661","full_name":"Schlagheck, Marit Lea","first_name":"Marit Lea","orcid":"0000-0002-8913-6080 ","last_name":"Schlagheck"},{"full_name":"Schoser, D.","last_name":"Schoser","first_name":"D."},{"full_name":"Vogel, A.","last_name":"Vogel","first_name":"A."},{"full_name":"Walzik, D.","last_name":"Walzik","first_name":"D."},{"full_name":"Zimmer, P.","first_name":"P.","last_name":"Zimmer"}],"publication_status":"published","date_updated":"2025-06-02T09:44:49Z","intvolume":"       124","date_created":"2025-06-02T09:43:08Z","type":"journal_article","publication":"European Journal of Applied Physiology","issue":"10","extern":"1","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:sec>\r\n                <jats:title>Purpose</jats:title>\r\n                <jats:p>Research supports physical activity as a method to heighten stress resistance and resilience through positive metabolic alterations mostly affecting the neuroendocrine system. High-intensity interval training (HIIT) has been proposed as a highly effective time-saving method to induce those changes. However, existing literature relies heavily on cross-sectional analyses, with few randomised controlled trials highlighting the necessity for more exercise interventions. Thus, this study aims to investigate the effects of HIIT versus an active control group on the stress response to an acute psychosocial stressor in emotionally impulsive humans (suggested as being strong stress responders).</jats:p>\r\n              </jats:sec><jats:sec>\r\n                <jats:title>Methods</jats:title>\r\n                <jats:p>The study protocol was registered online (DRKS00016589) before data collection. Sedentary, emotionally impulsive adults (30.69 ± 8.20 y) were recruited for a supervised intervention of 8 weeks and randomly allocated to either a HIIT (<jats:italic>n</jats:italic> = 25) or a stretching group (<jats:italic>n</jats:italic> = 19, acting as active controls). Participants were submitted to a test battery, including saliva samples, questionnaires (self-efficacy- and perceived stress-related), visual analogue scales (physical exercise- and stress-related), and resting electroencephalography and electrocardiography assessing their reaction to an acute psychological stressor (Trier Social Stress Test) before and after the exercise intervention.</jats:p>\r\n              </jats:sec><jats:sec>\r\n                <jats:title>Results</jats:title>\r\n                <jats:p>HIIT increased aerobic fitness in all participants, whereas stretching did not. Participants from the HIIT group reported perceiving exercising more intensively than those from the active control group (<jats:italic>ƞ</jats:italic><jats:sub><jats:italic>p</jats:italic></jats:sub><jats:sup><jats:italic>2</jats:italic></jats:sup> = 0.108, <jats:italic>p</jats:italic> = 0.038). No further group differences were detected. Both interventions largely increased levels of joy post-TSST (<jats:italic>ƞ</jats:italic><jats:sub><jats:italic>p</jats:italic></jats:sub><jats:sup><jats:italic>2</jats:italic></jats:sup> = 0.209, <jats:italic>p</jats:italic> = 0.003) whilst decreasing tension (<jats:italic>ƞ</jats:italic><jats:sub><jats:italic>p</jats:italic></jats:sub><jats:sup><jats:italic>2</jats:italic></jats:sup> = 0.262, <jats:italic>p</jats:italic> &lt; 0.001) and worries (<jats:italic>ƞ</jats:italic><jats:sub><jats:italic>p</jats:italic></jats:sub><jats:sup><jats:italic>2</jats:italic></jats:sup> = 0.113, <jats:italic>p</jats:italic> = 0.037). Finally, both interventions largely increased perceived levels of general self-efficacy (<jats:italic>ƞ</jats:italic><jats:sub><jats:italic>p</jats:italic></jats:sub><jats:sup><jats:italic>2</jats:italic></jats:sup> = 0.120, <jats:italic>p</jats:italic> = 0.029).</jats:p>\r\n              </jats:sec><jats:sec>\r\n                <jats:title>Conclusion</jats:title>\r\n                <jats:p>This study suggests that 8 weeks of HIIT does not change the psychoneuroendocrine response to an acute psychological stress test compared to an active control group in emotionally impulsive humans. Further replications of supervised exercise studies highly powered with active and passive controls are warranted.</jats:p>\r\n              </jats:sec>"}],"page":"2893-2908","publisher":"Springer Science and Business Media LLC","_id":"60092","user_id":"117661","volume":124,"status":"public","citation":{"mla":"Javelle, F., et al. “Eight Weeks of High-Intensity Interval Training versus Stretching Do Not Change the Psychoneuroendocrine Response to a Social Stress Test in Emotionally Impulsive Humans.” <i>European Journal of Applied Physiology</i>, vol. 124, no. 10, Springer Science and Business Media LLC, 2024, pp. 2893–908, doi:<a href=\"https://doi.org/10.1007/s00421-024-05471-w\">10.1007/s00421-024-05471-w</a>.","ama":"Javelle F, Bloch W, Borges U, et al. Eight weeks of high-intensity interval training versus stretching do not change the psychoneuroendocrine response to a social stress test in emotionally impulsive humans. <i>European Journal of Applied Physiology</i>. 2024;124(10):2893-2908. doi:<a href=\"https://doi.org/10.1007/s00421-024-05471-w\">10.1007/s00421-024-05471-w</a>","bibtex":"@article{Javelle_Bloch_Borges_Burberg_Collins_Gunasekara_Hosang_Jacobsen_Laborde_Löw_et al._2024, title={Eight weeks of high-intensity interval training versus stretching do not change the psychoneuroendocrine response to a social stress test in emotionally impulsive humans}, volume={124}, DOI={<a href=\"https://doi.org/10.1007/s00421-024-05471-w\">10.1007/s00421-024-05471-w</a>}, number={10}, journal={European Journal of Applied Physiology}, publisher={Springer Science and Business Media LLC}, author={Javelle, F. and Bloch, W. and Borges, U. and Burberg, T. and Collins, B. and Gunasekara, N. and Hosang, T. J. and Jacobsen, T. and Laborde, S. and Löw, A. and et al.}, year={2024}, pages={2893–2908} }","apa":"Javelle, F., Bloch, W., Borges, U., Burberg, T., Collins, B., Gunasekara, N., Hosang, T. J., Jacobsen, T., Laborde, S., Löw, A., Schenk, A., Schlagheck, M. L., Schoser, D., Vogel, A., Walzik, D., &#38; Zimmer, P. (2024). Eight weeks of high-intensity interval training versus stretching do not change the psychoneuroendocrine response to a social stress test in emotionally impulsive humans. <i>European Journal of Applied Physiology</i>, <i>124</i>(10), 2893–2908. <a href=\"https://doi.org/10.1007/s00421-024-05471-w\">https://doi.org/10.1007/s00421-024-05471-w</a>","ieee":"F. Javelle <i>et al.</i>, “Eight weeks of high-intensity interval training versus stretching do not change the psychoneuroendocrine response to a social stress test in emotionally impulsive humans,” <i>European Journal of Applied Physiology</i>, vol. 124, no. 10, pp. 2893–2908, 2024, doi: <a href=\"https://doi.org/10.1007/s00421-024-05471-w\">10.1007/s00421-024-05471-w</a>.","chicago":"Javelle, F., W. Bloch, U. Borges, T. Burberg, B. Collins, N. Gunasekara, T. J. Hosang, et al. “Eight Weeks of High-Intensity Interval Training versus Stretching Do Not Change the Psychoneuroendocrine Response to a Social Stress Test in Emotionally Impulsive Humans.” <i>European Journal of Applied Physiology</i> 124, no. 10 (2024): 2893–2908. <a href=\"https://doi.org/10.1007/s00421-024-05471-w\">https://doi.org/10.1007/s00421-024-05471-w</a>.","short":"F. Javelle, W. Bloch, U. Borges, T. Burberg, B. Collins, N. Gunasekara, T.J. Hosang, T. Jacobsen, S. Laborde, A. Löw, A. Schenk, M.L. Schlagheck, D. Schoser, A. Vogel, D. Walzik, P. Zimmer, European Journal of Applied Physiology 124 (2024) 2893–2908."}},{"date_created":"2025-06-02T20:03:39Z","department":[{"_id":"157"},{"_id":"43"}],"type":"journal_article","citation":{"mla":"Reschke, G., et al. “In-Situ Computed Tomography and Transient Dynamic Analysis – Failure Analysis of a Single-Lap Tensile-Shear Test with Clinch Points.” <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>, SAGE Publications, 2024, doi:<a href=\"https://doi.org/10.1177/09544089241251646\">10.1177/09544089241251646</a>.","bibtex":"@article{Reschke_Köhler_Kupfer_Troschitz_Gude_Brosius_2024, title={In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points}, DOI={<a href=\"https://doi.org/10.1177/09544089241251646\">10.1177/09544089241251646</a>}, journal={Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering}, publisher={SAGE Publications}, author={Reschke, G and Köhler, D and Kupfer, R and Troschitz, J and Gude, M and Brosius, A}, year={2024} }","ama":"Reschke G, Köhler D, Kupfer R, Troschitz J, Gude M, Brosius A. In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points. <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>. Published online 2024. doi:<a href=\"https://doi.org/10.1177/09544089241251646\">10.1177/09544089241251646</a>","ieee":"G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius, “In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points,” <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>, 2024, doi: <a href=\"https://doi.org/10.1177/09544089241251646\">10.1177/09544089241251646</a>.","apa":"Reschke, G., Köhler, D., Kupfer, R., Troschitz, J., Gude, M., &#38; Brosius, A. (2024). In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points. <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>. <a href=\"https://doi.org/10.1177/09544089241251646\">https://doi.org/10.1177/09544089241251646</a>","short":"G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).","chicago":"Reschke, G, D Köhler, R Kupfer, J Troschitz, M Gude, and A Brosius. “In-Situ Computed Tomography and Transient Dynamic Analysis – Failure Analysis of a Single-Lap Tensile-Shear Test with Clinch Points.” <i>Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering</i>, 2024. <a href=\"https://doi.org/10.1177/09544089241251646\">https://doi.org/10.1177/09544089241251646</a>."},"publication":"Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering","project":[{"name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","grant_number":"418701707","_id":"130"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C04: TRR 285 - Subproject C04","_id":"148"}],"abstract":[{"lang":"eng","text":"<jats:p> Clinching is a mechanical joining technology, in which a mainly form-fit joint is created by means of local cold forming. To characterize the load-bearing behavior of such joints, they are typically analyzed destructively, for example by tensile-shear tests in combination with metallographic sections. However, both the initiation and progress of failure can only be described to a limited extent by this method. Furthermore, these tests allow only limited conclusions about clinch points under in-service loading. More purposefully, clinch points can be analyzed nondestructively by combining in-situ computed tomography (CT) and transient dynamic analysis (TDA). The TDA continuously measures the dynamic behavior of the specimen and indicates failure events like crack initiation, which then can be evaluated thoroughly by stopping the test and performing a CT scan. To qualify the TDA for this task, it is necessary to link the observed damage behavior with specific dynamic characteristics. In this work, the complementation of in-situ CT and TDA is investigated by testing a clinched single-lap tensile-shear specimen made of aluminum. The testing procedure is stepwise: at certain displacement levels, the specimen is investigated by in-situ CT and TDA. While the in-situ CT provides the location, extent, and development of the failure phenomena, the TDA uses this information to evaluate the dynamic signal and detect relevant frequency ranges, which indicate damage events. The results demonstrate, that failure initiation and progression can be analyzed efficiently by combining both measuring systems. The TDA reliably detects relevant signal changes in the monitored frequency band. By means of in-situ computed tomography, the corresponding failure phenomena can be described in detail, enhancing the understanding of the load-bearing and deformation behavior of clinch points. The concatenation of characteristic signal changes and observed failure phenomena can henceforth be transferred to analyze complex structures during operation nondestructively by TDA. </jats:p>"}],"language":[{"iso":"eng"}],"_id":"60106","publisher":"SAGE Publications","doi":"10.1177/09544089241251646","user_id":"83408","author":[{"full_name":"Reschke, G","first_name":"G","last_name":"Reschke"},{"first_name":"D","last_name":"Köhler","full_name":"Köhler, D"},{"first_name":"R","last_name":"Kupfer","full_name":"Kupfer, R"},{"first_name":"J","last_name":"Troschitz","full_name":"Troschitz, J"},{"first_name":"M","last_name":"Gude","full_name":"Gude, M"},{"first_name":"A","last_name":"Brosius","full_name":"Brosius, A"}],"publication_identifier":{"issn":["0954-4089","2041-3009"]},"title":"In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points","status":"public","year":"2024","date_updated":"2025-06-02T20:18:31Z","publication_status":"published"},{"project":[{"name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130","grant_number":"418701707"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C04: TRR 285 - Subproject C04","_id":"148"},{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"}],"citation":{"ieee":"T. Borgert <i>et al.</i>, “In-situ computed tomography analysis of the failure mechanisms of thermomechanically manufactured joints with auxiliary joining element,” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, vol. 238, no. 12, pp. 2299–2306, 2024, doi: <a href=\"https://doi.org/10.1177/14644207241232233\">10.1177/14644207241232233</a>.","apa":"Borgert, T., Köhler, D., Wiens, E., Kupfer, R., Troschitz, J., Homberg, W., &#38; Gude, M. (2024). In-situ computed tomography analysis of the failure mechanisms of thermomechanically manufactured joints with auxiliary joining element. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, <i>238</i>(12), 2299–2306. <a href=\"https://doi.org/10.1177/14644207241232233\">https://doi.org/10.1177/14644207241232233</a>","short":"T. Borgert, D. Köhler, E. Wiens, R. Kupfer, J. Troschitz, W. Homberg, M. Gude, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 238 (2024) 2299–2306.","chicago":"Borgert, T, D Köhler, E. Wiens, R Kupfer, J Troschitz, W Homberg, and M Gude. “In-Situ Computed Tomography Analysis of the Failure Mechanisms of Thermomechanically Manufactured Joints with Auxiliary Joining Element.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i> 238, no. 12 (2024): 2299–2306. <a href=\"https://doi.org/10.1177/14644207241232233\">https://doi.org/10.1177/14644207241232233</a>.","mla":"Borgert, T., et al. “In-Situ Computed Tomography Analysis of the Failure Mechanisms of Thermomechanically Manufactured Joints with Auxiliary Joining Element.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, vol. 238, no. 12, SAGE Publications, 2024, pp. 2299–306, doi:<a href=\"https://doi.org/10.1177/14644207241232233\">10.1177/14644207241232233</a>.","bibtex":"@article{Borgert_Köhler_Wiens_Kupfer_Troschitz_Homberg_Gude_2024, title={In-situ computed tomography analysis of the failure mechanisms of thermomechanically manufactured joints with auxiliary joining element}, volume={238}, DOI={<a href=\"https://doi.org/10.1177/14644207241232233\">10.1177/14644207241232233</a>}, number={12}, journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE Publications}, author={Borgert, T and Köhler, D and Wiens, E. and Kupfer, R and Troschitz, J and Homberg, W and Gude, M}, year={2024}, pages={2299–2306} }","ama":"Borgert T, Köhler D, Wiens E, et al. In-situ computed tomography analysis of the failure mechanisms of thermomechanically manufactured joints with auxiliary joining element. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>. 2024;238(12):2299-2306. doi:<a href=\"https://doi.org/10.1177/14644207241232233\">10.1177/14644207241232233</a>"},"has_accepted_license":"1","status":"public","volume":238,"user_id":"83408","ddc":["620"],"_id":"60105","publisher":"SAGE Publications","page":"2299-2306","abstract":[{"text":"<jats:p> Lightweight design by using low-density and load-adapted materials can reduce the weight of vehicles and the emissions generated during operation. However, the usage of different materials requires innovative joining technologies with increased versatility. In this investigation, the focus is on describing and characterising the failure behaviour of connections manufactured by an innovative thermomechanical joining process with adaptable auxiliary joining elements in single-lap tensile-shear tests. In order to analyse the failure development in detail, the specimens are investigated using in-situ computed tomography (in-situ CT). Here, the tensile-shear test is interrupted at points of interest and CT scans are conducted under load. In addition, the interrupted in-situ testing procedure is validated by comparing the loading behaviour with conventional continuous tensile-shear tests. The results of the in-situ investigations of joints with varying material combinations clearly describe the cause of failure, allowing conclusions towards an improved joint design. </jats:p>","lang":"eng"}],"issue":"12","publication":"Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications","department":[{"_id":"157"},{"_id":"43"}],"type":"journal_article","date_created":"2025-06-02T20:01:39Z","intvolume":"       238","publication_status":"published","date_updated":"2025-06-02T20:18:42Z","publication_identifier":{"issn":["1464-4207","2041-3076"]},"author":[{"first_name":"T","last_name":"Borgert","full_name":"Borgert, T"},{"full_name":"Köhler, D","last_name":"Köhler","first_name":"D"},{"first_name":"E.","last_name":"Wiens","full_name":"Wiens, E."},{"last_name":"Kupfer","first_name":"R","full_name":"Kupfer, R"},{"full_name":"Troschitz, J","first_name":"J","last_name":"Troschitz"},{"full_name":"Homberg, W","last_name":"Homberg","first_name":"W"},{"full_name":"Gude, M","last_name":"Gude","first_name":"M"}],"title":"In-situ computed tomography analysis of the failure mechanisms of thermomechanically manufactured joints with auxiliary joining element","year":"2024","doi":"10.1177/14644207241232233","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"doi":"10.21741/9781644903131-187","author":[{"full_name":"Köhler, D.","last_name":"Köhler","first_name":"D."},{"last_name":"Kupfer","first_name":"R.","full_name":"Kupfer, R."},{"last_name":"Troschitz","first_name":"J.","full_name":"Troschitz, J."},{"first_name":"M.","last_name":"Gude","full_name":"Gude, M."}],"publication_identifier":{"issn":["2474-395X"]},"year":"2024","title":"In-situ CT of the clinching process – Influence of settling effects due to process interruptions","intvolume":"        41","publication_status":"published","date_updated":"2025-06-02T20:18:11Z","date_created":"2025-06-02T20:04:17Z","department":[{"_id":"157"},{"_id":"43"}],"type":"conference","publication":"Materials Research Proceedings","abstract":[{"text":"<jats:p>Abstract. In lightweight constructions, clinching represents a cost-effective solution, in which joints are produced by local cold forming of the joining parts. Clinching phenomena are typically evaluated using destructive testing methods. While these methods influence the clinch point’s state, in-situ computed tomography (in-situ CT) is able to explore the clinching process with a specimen under load. Here, the path-controlled clinching process is interrupted at certain displacement levels and the specimen is scanned by CT while remaining in a stationary state. These interruptions are always accompanied by settling effects reducing the reaction force. Therefore, in this work, the influence of these interruptions on the force-displacement behavior during clinching and on the final clinch point’s geometric properties is investigated. </jats:p>","lang":"eng"}],"publisher":"Materials Research Forum LLC","_id":"60107","volume":41,"user_id":"83408","status":"public","citation":{"apa":"Köhler, D., Kupfer, R., Troschitz, J., &#38; Gude, M. (2024). In-situ CT of the clinching process – Influence of settling effects due to process interruptions. <i>Materials Research Proceedings</i>, <i>41</i>. <a href=\"https://doi.org/10.21741/9781644903131-187\">https://doi.org/10.21741/9781644903131-187</a>","ieee":"D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In-situ CT of the clinching process – Influence of settling effects due to process interruptions,” in <i>Materials Research Proceedings</i>, 2024, vol. 41, doi: <a href=\"https://doi.org/10.21741/9781644903131-187\">10.21741/9781644903131-187</a>.","short":"D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2024.","chicago":"Köhler, D., R. Kupfer, J. Troschitz, and M. Gude. “In-Situ CT of the Clinching Process – Influence of Settling Effects Due to Process Interruptions.” In <i>Materials Research Proceedings</i>, Vol. 41. Materials Research Forum LLC, 2024. <a href=\"https://doi.org/10.21741/9781644903131-187\">https://doi.org/10.21741/9781644903131-187</a>.","mla":"Köhler, D., et al. “In-Situ CT of the Clinching Process – Influence of Settling Effects Due to Process Interruptions.” <i>Materials Research Proceedings</i>, vol. 41, Materials Research Forum LLC, 2024, doi:<a href=\"https://doi.org/10.21741/9781644903131-187\">10.21741/9781644903131-187</a>.","ama":"Köhler D, Kupfer R, Troschitz J, Gude M. In-situ CT of the clinching process – Influence of settling effects due to process interruptions. In: <i>Materials Research Proceedings</i>. Vol 41. Materials Research Forum LLC; 2024. doi:<a href=\"https://doi.org/10.21741/9781644903131-187\">10.21741/9781644903131-187</a>","bibtex":"@inproceedings{Köhler_Kupfer_Troschitz_Gude_2024, title={In-situ CT of the clinching process – Influence of settling effects due to process interruptions}, volume={41}, DOI={<a href=\"https://doi.org/10.21741/9781644903131-187\">10.21741/9781644903131-187</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Köhler, D. and Kupfer, R. and Troschitz, J. and Gude, M.}, year={2024} }"},"project":[{"name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","grant_number":"418701707","_id":"130"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"148","name":"TRR 285 – C04: TRR 285 - Subproject C04"}]},{"_id":"60161","publisher":"CRC Press","edition":"1.","language":[{"iso":"eng"}],"user_id":"15782","editor":[{"last_name":"Kin-Tak Lam","first_name":"Artde Donald","full_name":"Kin-Tak Lam, Artde Donald"},{"full_name":"Prior, Stephen D.","first_name":"Stephen D.","last_name":"Prior"},{"full_name":"Shen, Siu-Tsen","first_name":"Siu-Tsen","last_name":"Shen"},{"last_name":"Young","first_name":"Sheng-Joue","full_name":"Young, Sheng-Joue"},{"full_name":"Ji, Liang-Wen","last_name":"Ji","first_name":"Liang-Wen"}],"title":"Portals across domains: A data analysis task and documentation canvas for data-driven model-based systems engineering","status":"public","year":"2024","author":[{"last_name":"Tissen","first_name":"Denis","full_name":"Tissen, Denis","id":"44458"},{"full_name":"Wiederkehr, Ingrid","last_name":"Wiederkehr","first_name":"Ingrid","id":"38169"},{"last_name":"Bernijazov","first_name":"Ruslan","full_name":"Bernijazov, Ruslan","id":"36312"},{"first_name":"Christian","last_name":"Koldewey","orcid":"https://orcid.org/0000-0001-7992-6399","full_name":"Koldewey, Christian","id":"43136"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman","id":"16190"}],"date_updated":"2025-06-10T10:19:40Z","date_created":"2025-06-10T10:18:33Z","place":"London","type":"book_chapter","department":[{"_id":"563"}],"publication":"System Innovation for an Artificial Intelligence Era ","citation":{"mla":"Tissen, Denis, et al. “Portals across Domains: A Data Analysis Task and Documentation Canvas for Data-Driven Model-Based Systems Engineering.” <i>System Innovation for an Artificial Intelligence Era </i>, edited by Artde Donald Kin-Tak Lam et al., 1., CRC Press, 2024.","ama":"Tissen D, Wiederkehr I, Bernijazov R, Koldewey C, Dumitrescu R. Portals across domains: A data analysis task and documentation canvas for data-driven model-based systems engineering. In: Kin-Tak Lam AD, Prior SD, Shen S-T, Young S-J, Ji L-W, eds. <i>System Innovation for an Artificial Intelligence Era </i>. 1. CRC Press; 2024.","bibtex":"@inbook{Tissen_Wiederkehr_Bernijazov_Koldewey_Dumitrescu_2024, place={London}, edition={1.}, title={Portals across domains: A data analysis task and documentation canvas for data-driven model-based systems engineering}, booktitle={System Innovation for an Artificial Intelligence Era }, publisher={CRC Press}, author={Tissen, Denis and Wiederkehr, Ingrid and Bernijazov, Ruslan and Koldewey, Christian and Dumitrescu, Roman}, editor={Kin-Tak Lam, Artde Donald and Prior, Stephen D. and Shen, Siu-Tsen and Young, Sheng-Joue and Ji, Liang-Wen}, year={2024} }","apa":"Tissen, D., Wiederkehr, I., Bernijazov, R., Koldewey, C., &#38; Dumitrescu, R. (2024). Portals across domains: A data analysis task and documentation canvas for data-driven model-based systems engineering. In A. D. Kin-Tak Lam, S. D. Prior, S.-T. Shen, S.-J. Young, &#38; L.-W. Ji (Eds.), <i>System Innovation for an Artificial Intelligence Era </i> (1.). CRC Press.","ieee":"D. Tissen, I. Wiederkehr, R. Bernijazov, C. Koldewey, and R. Dumitrescu, “Portals across domains: A data analysis task and documentation canvas for data-driven model-based systems engineering,” in <i>System Innovation for an Artificial Intelligence Era </i>, 1., A. D. Kin-Tak Lam, S. D. Prior, S.-T. Shen, S.-J. Young, and L.-W. Ji, Eds. London: CRC Press, 2024.","short":"D. Tissen, I. Wiederkehr, R. Bernijazov, C. Koldewey, R. Dumitrescu, in: A.D. Kin-Tak Lam, S.D. Prior, S.-T. Shen, S.-J. Young, L.-W. Ji (Eds.), System Innovation for an Artificial Intelligence Era , 1., CRC Press, London, 2024.","chicago":"Tissen, Denis, Ingrid Wiederkehr, Ruslan Bernijazov, Christian Koldewey, and Roman Dumitrescu. “Portals across Domains: A Data Analysis Task and Documentation Canvas for Data-Driven Model-Based Systems Engineering.” In <i>System Innovation for an Artificial Intelligence Era </i>, edited by Artde Donald Kin-Tak Lam, Stephen D. Prior, Siu-Tsen Shen, Sheng-Joue Young, and Liang-Wen Ji, 1. London: CRC Press, 2024."}},{"user_id":"15782","editor":[{"full_name":"Kin-Tak Lam, Artde Donald","last_name":"Kin-Tak Lam","first_name":"Artde Donald"},{"first_name":"Stephen D.","last_name":"Prior","full_name":"Prior, Stephen D."},{"full_name":"Shen, Siu-Tsen","first_name":"Siu-Tsen","last_name":"Shen"},{"last_name":"Young","first_name":"Sheng-Joue","full_name":"Young, Sheng-Joue"},{"full_name":"Ji, Liang-Wen","first_name":"Liang-Wen","last_name":"Ji"}],"_id":"58449","publisher":"CRC Press","language":[{"iso":"eng"}],"date_updated":"2025-06-10T10:21:48Z","title":"Sustinnovate or perish: Principles for sustainable innovation","year":"2024","status":"public","publication_identifier":{"isbn":["9781003514831"]},"author":[{"full_name":"Wiederkehr, Ingrid","first_name":"Ingrid","last_name":"Wiederkehr","id":"38169"},{"last_name":"Tissen","first_name":"Denis","full_name":"Tissen, Denis","id":"44458"},{"full_name":"Koldewey, Christian","last_name":"Koldewey","first_name":"Christian","orcid":"https://orcid.org/0000-0001-7992-6399","id":"43136"},{"full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu","id":"16190"}],"type":"book_chapter","department":[{"_id":"563"}],"date_created":"2025-01-30T14:55:04Z","place":"London","publication":"System Innovation for an Artificial Intelligence Era","citation":{"mla":"Wiederkehr, Ingrid, et al. “Sustinnovate or Perish: Principles for Sustainable Innovation.” <i>System Innovation for an Artificial Intelligence Era</i>, edited by Artde Donald Kin-Tak Lam et al., CRC Press, 2024.","bibtex":"@inbook{Wiederkehr_Tissen_Koldewey_Dumitrescu_2024, place={London}, title={Sustinnovate or perish: Principles for sustainable innovation}, booktitle={System Innovation for an Artificial Intelligence Era}, publisher={CRC Press}, author={Wiederkehr, Ingrid and Tissen, Denis and Koldewey, Christian and Dumitrescu, Roman}, editor={Kin-Tak Lam, Artde Donald and Prior, Stephen D. and Shen, Siu-Tsen and Young, Sheng-Joue and Ji, Liang-Wen}, year={2024} }","ama":"Wiederkehr I, Tissen D, Koldewey C, Dumitrescu R. Sustinnovate or perish: Principles for sustainable innovation. In: Kin-Tak Lam AD, Prior SD, Shen S-T, Young S-J, Ji L-W, eds. <i>System Innovation for an Artificial Intelligence Era</i>. CRC Press; 2024.","ieee":"I. Wiederkehr, D. Tissen, C. Koldewey, and R. Dumitrescu, “Sustinnovate or perish: Principles for sustainable innovation,” in <i>System Innovation for an Artificial Intelligence Era</i>, A. D. Kin-Tak Lam, S. D. Prior, S.-T. Shen, S.-J. Young, and L.-W. Ji, Eds. London: CRC Press, 2024.","apa":"Wiederkehr, I., Tissen, D., Koldewey, C., &#38; Dumitrescu, R. (2024). Sustinnovate or perish: Principles for sustainable innovation. In A. D. Kin-Tak Lam, S. D. Prior, S.-T. Shen, S.-J. Young, &#38; L.-W. Ji (Eds.), <i>System Innovation for an Artificial Intelligence Era</i>. CRC Press.","short":"I. Wiederkehr, D. Tissen, C. Koldewey, R. Dumitrescu, in: A.D. Kin-Tak Lam, S.D. Prior, S.-T. Shen, S.-J. Young, L.-W. Ji (Eds.), System Innovation for an Artificial Intelligence Era, CRC Press, London, 2024.","chicago":"Wiederkehr, Ingrid, Denis Tissen, Christian Koldewey, and Roman Dumitrescu. “Sustinnovate or Perish: Principles for Sustainable Innovation.” In <i>System Innovation for an Artificial Intelligence Era</i>, edited by Artde Donald Kin-Tak Lam, Stephen D. Prior, Siu-Tsen Shen, Sheng-Joue Young, and Liang-Wen Ji. London: CRC Press, 2024."}},{"type":"conference","department":[{"_id":"10"},{"_id":"87"},{"_id":"93"}],"date_created":"2026-01-14T01:54:48Z","publication":"Geometric Methods in Physics, XLI Workshop","doi":"10.1007/978-3-031-89857-0_9","alternative_title":["Trends in Mathematics"],"language":[{"iso":"eng"}],"series_title":"Geometric Methods in Physics XLI","date_updated":"2026-01-14T02:30:59Z","publication_status":"published","year":"2024","title":"Poisson structures in the Banach setting: comparison of different approaches","publication_identifier":{"isbn":["978-3-031-89857-0"]},"author":[{"full_name":"Tomasz\tGoliński, Tomasz\t","first_name":"Tomasz\t","last_name":"Tomasz\tGoliński"},{"id":"103300","full_name":"Rahangdale, Praful","first_name":"Praful","last_name":"Rahangdale"},{"full_name":"Tumpach, Alice Barbora","first_name":"Alice Barbora","last_name":"Tumpach"}],"place":"Białowieża, Poland","citation":{"short":"T. Tomasz\tGoliński, P. Rahangdale, A.B. Tumpach, in: P. Kielanowski, A. Dobrogowska, D. Fernández, D. Goliński (Eds.), Geometric Methods in Physics, XLI Workshop, Birkhauser, Białowieża, Poland, 2024, pp. 97–117.","ama":"Tomasz\tGoliński T, Rahangdale P, Tumpach AB. Poisson structures in the Banach setting: comparison of different approaches. In: Kielanowski P, Dobrogowska A, Fernández D, Goliński D, eds. <i>Geometric Methods in Physics, XLI Workshop</i>. Geometric Methods in Physics XLI. Birkhauser; 2024:97–117. doi:<a href=\"https://doi.org/10.1007/978-3-031-89857-0_9\">10.1007/978-3-031-89857-0_9</a>","chicago":"Tomasz\tGoliński, Tomasz\t, Praful Rahangdale, and Alice Barbora Tumpach. “Poisson Structures in the Banach Setting: Comparison of Different Approaches.” In <i>Geometric Methods in Physics, XLI Workshop</i>, edited by P. Kielanowski, A. Dobrogowska, D. Fernández, and D. Goliński, 97–117. Geometric Methods in Physics XLI. Białowieża, Poland: Birkhauser, 2024. <a href=\"https://doi.org/10.1007/978-3-031-89857-0_9\">https://doi.org/10.1007/978-3-031-89857-0_9</a>.","bibtex":"@inproceedings{Tomasz\tGoliński_Rahangdale_Tumpach_2024, place={Białowieża, Poland}, series={Geometric Methods in Physics XLI}, title={Poisson structures in the Banach setting: comparison of different approaches}, DOI={<a href=\"https://doi.org/10.1007/978-3-031-89857-0_9\">10.1007/978-3-031-89857-0_9</a>}, booktitle={Geometric Methods in Physics, XLI Workshop}, publisher={Birkhauser}, author={Tomasz\tGoliński, Tomasz\t and Rahangdale, Praful and Tumpach, Alice Barbora}, editor={Kielanowski, P. and Dobrogowska, A. and Fernández, D. and Goliński, D.}, year={2024}, pages={97–117}, collection={Geometric Methods in Physics XLI} }","apa":"Tomasz\tGoliński, T., Rahangdale, P., &#38; Tumpach, A. B. (2024). Poisson structures in the Banach setting: comparison of different approaches. In P. Kielanowski, A. Dobrogowska, D. Fernández, &#38; D. Goliński (Eds.), <i>Geometric Methods in Physics, XLI Workshop</i> (pp. 97–117). Birkhauser. <a href=\"https://doi.org/10.1007/978-3-031-89857-0_9\">https://doi.org/10.1007/978-3-031-89857-0_9</a>","mla":"Tomasz\tGoliński, Tomasz, et al. “Poisson Structures in the Banach Setting: Comparison of Different Approaches.” <i>Geometric Methods in Physics, XLI Workshop</i>, edited by P. Kielanowski et al., Birkhauser, 2024, pp. 97–117, doi:<a href=\"https://doi.org/10.1007/978-3-031-89857-0_9\">10.1007/978-3-031-89857-0_9</a>.","ieee":"T. Tomasz\tGoliński, P. Rahangdale, and A. B. Tumpach, “Poisson structures in the Banach setting: comparison of different approaches,” in <i>Geometric Methods in Physics, XLI Workshop</i>, Białystok, Poland, 2024, pp. 97–117, doi: <a href=\"https://doi.org/10.1007/978-3-031-89857-0_9\">10.1007/978-3-031-89857-0_9</a>."},"user_id":"103300","editor":[{"full_name":"Kielanowski, P.","first_name":"P.","last_name":"Kielanowski"},{"first_name":"A.","last_name":"Dobrogowska","full_name":"Dobrogowska, A."},{"last_name":"Fernández","first_name":"D.","full_name":"Fernández, D."},{"first_name":"D.","last_name":"Goliński","full_name":"Goliński, D."}],"page":"97–117","publisher":"Birkhauser","_id":"63605","status":"public","conference":{"name":"XLI Workshop on Geometric Methods in Physics","start_date":"2024-07-01","location":"Białystok, Poland","end_date":"2024-07-06"}}]