---
_id: '34216'
abstract:
- lang: eng
text: Mechanical joining technologies are increasingly used in multi-material lightweight
constructions and offer opportunities to create versatile joining processes due
to their low heat input, robustness to metallurgical incompatibilities and various
process variants. They can be categorised into technologies which require an auxiliary
joining element, or do not require an auxiliary joining element. A typical example
for a mechanical joining process with auxiliary joining element is self-piercing
riveting. A wide range of processes exist which are not requiring an auxiliary
joining element. This allows both point-shaped (e.g., by clinching) and line-shaped
(e.g., friction stir welding) joints to be produced. In order to achieve versatile
processes, challenges exist in particular in the creation of intervention possibilities
in the process and the understanding and handling of materials that are difficult
to join, such as fiber reinforced plastics (FRP) or high-strength metals. In addition,
predictive capability is required, which in particular requires accurate process
simulation. Finally, the processes must be measured non-destructively in order
to generate control variables in the process or to investigate the cause-effect
relationship. This paper covers the state of the art in scientific research concerning
mechanical joining and discusses future challenges on the way to versatile mechanical
joining processes.
article_number: '100113'
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: M.
full_name: Merklein, M.
last_name: Merklein
- first_name: A.
full_name: Brosius, A.
last_name: Brosius
- first_name: D.
full_name: Drummer, D.
last_name: Drummer
- first_name: L.
full_name: Fratini, L.
last_name: Fratini
- first_name: U.
full_name: Füssel, U.
last_name: Füssel
- first_name: M.
full_name: Gude, M.
last_name: Gude
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: P.A.F.
full_name: Martins, P.A.F.
last_name: Martins
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: M.
full_name: Lechner, M.
last_name: Lechner
- first_name: R.
full_name: Kupfer, R.
last_name: Kupfer
- first_name: B.
full_name: Gröger, B.
last_name: Gröger
- first_name: Daxin
full_name: Han, Daxin
id: '36544'
last_name: Han
- first_name: J.
full_name: Kalich, J.
last_name: Kalich
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: T.
full_name: Kleffel, T.
last_name: Kleffel
- first_name: D.
full_name: Köhler, D.
last_name: Köhler
- first_name: C.-M.
full_name: Kuball, C.-M.
last_name: Kuball
- first_name: J.
full_name: Popp, J.
last_name: Popp
- first_name: D.
full_name: Römisch, D.
last_name: Römisch
- first_name: J.
full_name: Troschitz, J.
last_name: Troschitz
- first_name: Christian
full_name: Wischer, Christian
id: '72219'
last_name: Wischer
- first_name: S.
full_name: Wituschek, S.
last_name: Wituschek
- first_name: M.
full_name: Wolf, M.
last_name: Wolf
citation:
ama: Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic
deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113
apa: Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U.,
Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R.,
Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M.,
… Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal
of Advanced Joining Processes, 5, Article 100113. https://doi.org/10.1016/j.jajp.2022.100113
bibtex: '@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et
al._2022, title={Review on mechanical joining by plastic deformation}, volume={5},
DOI={10.1016/j.jajp.2022.100113},
number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Meschut, Gerson and Merklein, M. and Brosius, A. and Drummer, D.
and Fratini, L. and Füssel, U. and Gude, M. and Homberg, Werner and Martins, P.A.F.
and Bobbert, Mathias and et al.}, year={2022} }'
chicago: Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel,
M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal
of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113.
ieee: 'G. Meschut et al., “Review on mechanical joining by plastic deformation,”
Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:
10.1016/j.jajp.2022.100113.'
mla: Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”
Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022,
doi:10.1016/j.jajp.2022.100113.
short: G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M.
Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger,
D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D.
Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced
Joining Processes 5 (2022).
date_created: 2022-12-05T21:24:49Z
date_updated: 2023-04-27T08:52:38Z
department:
- _id: '157'
- _id: '156'
- _id: '9'
doi: 10.1016/j.jajp.2022.100113
intvolume: ' 5'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '138'
name: 'TRR 285 – A04: TRR 285 - Subproject A04'
- _id: '137'
name: 'TRR 285 – A03: TRR 285 - Subproject A03'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '145'
name: 'TRR 285 – C01: TRR 285 - Subproject C01'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Review on mechanical joining by plastic deformation
type: journal_article
user_id: '66459'
volume: 5
year: '2022'
...
---
_id: '32275'
article_number: '100113'
author:
- first_name: G.
full_name: Meschut, G.
last_name: Meschut
- first_name: M.
full_name: Merklein, M.
last_name: Merklein
- first_name: A.
full_name: Brosius, A.
last_name: Brosius
- first_name: D.
full_name: Drummer, D.
last_name: Drummer
- first_name: L.
full_name: Fratini, L.
last_name: Fratini
- first_name: U.
full_name: Füssel, U.
last_name: Füssel
- first_name: M.
full_name: Gude, M.
last_name: Gude
- first_name: W.
full_name: Homberg, W.
last_name: Homberg
- first_name: P.A.F.
full_name: Martins, P.A.F.
last_name: Martins
- first_name: M.
full_name: Bobbert, M.
last_name: Bobbert
- first_name: M.
full_name: Lechner, M.
last_name: Lechner
- first_name: R.
full_name: Kupfer, R.
last_name: Kupfer
- first_name: B.
full_name: Gröger, B.
last_name: Gröger
- first_name: D.
full_name: Han, D.
last_name: Han
- first_name: J.
full_name: Kalich, J.
last_name: Kalich
- first_name: F.
full_name: Kappe, F.
last_name: Kappe
- first_name: T.
full_name: Kleffel, T.
last_name: Kleffel
- first_name: D.
full_name: Köhler, D.
last_name: Köhler
- first_name: C.-M.
full_name: Kuball, C.-M.
last_name: Kuball
- first_name: J.
full_name: Popp, J.
last_name: Popp
- first_name: D.
full_name: Römisch, D.
last_name: Römisch
- first_name: J.
full_name: Troschitz, J.
last_name: Troschitz
- first_name: C.
full_name: Wischer, C.
last_name: Wischer
- first_name: S.
full_name: Wituschek, S.
last_name: Wituschek
- first_name: M.
full_name: Wolf, M.
last_name: Wolf
citation:
ama: Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic
deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113
apa: Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U.,
Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R.,
Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M.,
… Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal
of Advanced Joining Processes, 5, Article 100113. https://doi.org/10.1016/j.jajp.2022.100113
bibtex: '@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et
al._2022, title={Review on mechanical joining by plastic deformation}, volume={5},
DOI={10.1016/j.jajp.2022.100113},
number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Meschut, G. and Merklein, M. and Brosius, A. and Drummer, D. and
Fratini, L. and Füssel, U. and Gude, M. and Homberg, W. and Martins, P.A.F. and
Bobbert, M. and et al.}, year={2022} }'
chicago: Meschut, G., M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel,
M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal
of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113.
ieee: 'G. Meschut et al., “Review on mechanical joining by plastic deformation,”
Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:
10.1016/j.jajp.2022.100113.'
mla: Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.”
Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022,
doi:10.1016/j.jajp.2022.100113.
short: G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M.
Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger,
D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D.
Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced
Joining Processes 5 (2022).
date_created: 2022-06-29T07:42:45Z
date_updated: 2023-04-27T08:55:13Z
doi: 10.1016/j.jajp.2022.100113
intvolume: ' 5'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Review on mechanical joining by plastic deformation
type: journal_article
user_id: '66459'
volume: 5
year: '2022'
...
---
_id: '34224'
abstract:
- lang: eng
text: Crack growth in structures depends on the cyclic loads applied on it, such
as mechanical, thermal and contact, as well as residual stresses, etc. To provide
an accurate simulation of crack growth in structures, it is of high importance
to integrate all kinds of loading situations in the simulations. Adapcrack3D is
a simulation program that can accurately predict the propagation of cracks in
real structures. However, until now, this three-dimensional program has only considered
mechanical loads and static thermal loads. Therefore, the features of Adapcrack3D
have been extended by including contact loading in crack growth simulations. The
numerical simulation of crack propagation with Adapcrack3D is generally carried
out using FE models of structures provided by the user. For simulating models
with contact loading situations, Adapcrack3D has been updated to work with FE
models containing multiple parts and necessary features such as coupling and surface
interactions. Because Adapcrack3D uses the submodel technique for fracture mechanical
evaluations, the architecture of the submodel is also modified to simulate models
with contact definitions between the crack surfaces. This paper discusses the
newly implemented attribute of the program with the help of illustrative examples.
The results confirm that the contact simulation in Adapcrack3D is a major step
in improving the functionality of the program.
article_number: '7557'
author:
- first_name: Tintu David
full_name: Joy, Tintu David
id: '30821'
last_name: Joy
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
citation:
ama: Joy TD, Weiß D, Schramm B, Kullmer G. Further Development of 3D Crack Growth
Simulation Program to Include Contact Loading Situations. Applied Sciences.
2022;12(15). doi:10.3390/app12157557
apa: Joy, T. D., Weiß, D., Schramm, B., & Kullmer, G. (2022). Further Development
of 3D Crack Growth Simulation Program to Include Contact Loading Situations. Applied
Sciences, 12(15), Article 7557. https://doi.org/10.3390/app12157557
bibtex: '@article{Joy_Weiß_Schramm_Kullmer_2022, title={Further Development of 3D
Crack Growth Simulation Program to Include Contact Loading Situations}, volume={12},
DOI={10.3390/app12157557}, number={157557},
journal={Applied Sciences}, publisher={MDPI AG}, author={Joy, Tintu David and
Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2022} }'
chicago: Joy, Tintu David, Deborah Weiß, Britta Schramm, and Gunter Kullmer. “Further
Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”
Applied Sciences 12, no. 15 (2022). https://doi.org/10.3390/app12157557.
ieee: 'T. D. Joy, D. Weiß, B. Schramm, and G. Kullmer, “Further Development of 3D
Crack Growth Simulation Program to Include Contact Loading Situations,” Applied
Sciences, vol. 12, no. 15, Art. no. 7557, 2022, doi: 10.3390/app12157557.'
mla: Joy, Tintu David, et al. “Further Development of 3D Crack Growth Simulation
Program to Include Contact Loading Situations.” Applied Sciences, vol.
12, no. 15, 7557, MDPI AG, 2022, doi:10.3390/app12157557.
short: T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022).
date_created: 2022-12-05T21:49:48Z
date_updated: 2023-04-27T10:13:44Z
department:
- _id: '143'
doi: 10.3390/app12157557
intvolume: ' 12'
issue: '15'
keyword:
- Fluid Flow and Transfer Processes
- Computer Science Applications
- Process Chemistry and Technology
- General Engineering
- Instrumentation
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
publication: Applied Sciences
publication_identifier:
issn:
- 2076-3417
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Further Development of 3D Crack Growth Simulation Program to Include Contact
Loading Situations
type: journal_article
user_id: '45673'
volume: 12
year: '2022'
...
---
_id: '39372'
author:
- first_name: Sven
full_name: Lange, Sven
last_name: Lange
- first_name: Christian
full_name: Hedayat, Christian
last_name: Hedayat
- first_name: Harald
full_name: Kuhn, Harald
last_name: Kuhn
- first_name: Ulrich
full_name: Hilleringmann, Ulrich
id: '20179'
last_name: Hilleringmann
citation:
ama: 'Lange S, Hedayat C, Kuhn H, Hilleringmann U. Modeling and Characterization
of a 3D Environment for the Design of an Inductively Based Locating Method by
Coil Couplings. In: 2022 Smart Systems Integration (SSI). IEEE; 2022. doi:10.1109/ssi56489.2022.9901416'
apa: Lange, S., Hedayat, C., Kuhn, H., & Hilleringmann, U. (2022). Modeling
and Characterization of a 3D Environment for the Design of an Inductively Based
Locating Method by Coil Couplings. 2022 Smart Systems Integration (SSI).
https://doi.org/10.1109/ssi56489.2022.9901416
bibtex: '@inproceedings{Lange_Hedayat_Kuhn_Hilleringmann_2022, title={Modeling and
Characterization of a 3D Environment for the Design of an Inductively Based Locating
Method by Coil Couplings}, DOI={10.1109/ssi56489.2022.9901416},
booktitle={2022 Smart Systems Integration (SSI)}, publisher={IEEE}, author={Lange,
Sven and Hedayat, Christian and Kuhn, Harald and Hilleringmann, Ulrich}, year={2022}
}'
chicago: Lange, Sven, Christian Hedayat, Harald Kuhn, and Ulrich Hilleringmann.
“Modeling and Characterization of a 3D Environment for the Design of an Inductively
Based Locating Method by Coil Couplings.” In 2022 Smart Systems Integration
(SSI). IEEE, 2022. https://doi.org/10.1109/ssi56489.2022.9901416.
ieee: 'S. Lange, C. Hedayat, H. Kuhn, and U. Hilleringmann, “Modeling and Characterization
of a 3D Environment for the Design of an Inductively Based Locating Method by
Coil Couplings,” 2022, doi: 10.1109/ssi56489.2022.9901416.'
mla: Lange, Sven, et al. “Modeling and Characterization of a 3D Environment for
the Design of an Inductively Based Locating Method by Coil Couplings.” 2022
Smart Systems Integration (SSI), IEEE, 2022, doi:10.1109/ssi56489.2022.9901416.
short: 'S. Lange, C. Hedayat, H. Kuhn, U. Hilleringmann, in: 2022 Smart Systems
Integration (SSI), IEEE, 2022.'
date_created: 2023-01-24T10:02:44Z
date_updated: 2023-03-22T10:27:01Z
department:
- _id: '59'
doi: 10.1109/ssi56489.2022.9901416
language:
- iso: eng
publication: 2022 Smart Systems Integration (SSI)
publication_status: published
publisher: IEEE
status: public
title: Modeling and Characterization of a 3D Environment for the Design of an Inductively
Based Locating Method by Coil Couplings
type: conference
user_id: '20179'
year: '2022'
...
---
_id: '39373'
author:
- first_name: Sven
full_name: Lange, Sven
last_name: Lange
- first_name: Christian
full_name: Hedayat, Christian
last_name: Hedayat
- first_name: Harald
full_name: Kuhn, Harald
last_name: Kuhn
- first_name: Ulrich
full_name: Hilleringmann, Ulrich
id: '20179'
last_name: Hilleringmann
citation:
ama: 'Lange S, Hedayat C, Kuhn H, Hilleringmann U. Modeling and Characterization
of a 3D Environment for the Design of an Inductively Based Locating Method by
Coil Couplings. In: 2022 Smart Systems Integration (SSI). IEEE; 2022. doi:10.1109/ssi56489.2022.9901416'
apa: Lange, S., Hedayat, C., Kuhn, H., & Hilleringmann, U. (2022). Modeling
and Characterization of a 3D Environment for the Design of an Inductively Based
Locating Method by Coil Couplings. 2022 Smart Systems Integration (SSI).
https://doi.org/10.1109/ssi56489.2022.9901416
bibtex: '@inproceedings{Lange_Hedayat_Kuhn_Hilleringmann_2022, title={Modeling and
Characterization of a 3D Environment for the Design of an Inductively Based Locating
Method by Coil Couplings}, DOI={10.1109/ssi56489.2022.9901416},
booktitle={2022 Smart Systems Integration (SSI)}, publisher={IEEE}, author={Lange,
Sven and Hedayat, Christian and Kuhn, Harald and Hilleringmann, Ulrich}, year={2022}
}'
chicago: Lange, Sven, Christian Hedayat, Harald Kuhn, and Ulrich Hilleringmann.
“Modeling and Characterization of a 3D Environment for the Design of an Inductively
Based Locating Method by Coil Couplings.” In 2022 Smart Systems Integration
(SSI). IEEE, 2022. https://doi.org/10.1109/ssi56489.2022.9901416.
ieee: 'S. Lange, C. Hedayat, H. Kuhn, and U. Hilleringmann, “Modeling and Characterization
of a 3D Environment for the Design of an Inductively Based Locating Method by
Coil Couplings,” 2022, doi: 10.1109/ssi56489.2022.9901416.'
mla: Lange, Sven, et al. “Modeling and Characterization of a 3D Environment for
the Design of an Inductively Based Locating Method by Coil Couplings.” 2022
Smart Systems Integration (SSI), IEEE, 2022, doi:10.1109/ssi56489.2022.9901416.
short: 'S. Lange, C. Hedayat, H. Kuhn, U. Hilleringmann, in: 2022 Smart Systems
Integration (SSI), IEEE, 2022.'
date_created: 2023-01-24T10:03:39Z
date_updated: 2023-03-23T13:26:35Z
department:
- _id: '59'
doi: 10.1109/ssi56489.2022.9901416
language:
- iso: eng
publication: 2022 Smart Systems Integration (SSI)
publication_status: published
publisher: IEEE
status: public
title: Modeling and Characterization of a 3D Environment for the Design of an Inductively
Based Locating Method by Coil Couplings
type: conference
user_id: '20179'
year: '2022'
...
---
_id: '39375'
author:
- first_name: Sven
full_name: Lange, Sven
last_name: Lange
- first_name: Christian
full_name: Hedayat, Christian
last_name: Hedayat
- first_name: Harald
full_name: Kuhn, Harald
last_name: Kuhn
- first_name: Ulrich
full_name: Hilleringmann, Ulrich
id: '20179'
last_name: Hilleringmann
citation:
ama: 'Lange S, Hedayat C, Kuhn H, Hilleringmann U. Modeling and Characterization
of a 3D Environment for the Design of an Inductively Based Locating Method by
Coil Couplings. In: 2022 Smart Systems Integration (SSI). IEEE; 2022. doi:10.1109/ssi56489.2022.9901416'
apa: Lange, S., Hedayat, C., Kuhn, H., & Hilleringmann, U. (2022). Modeling
and Characterization of a 3D Environment for the Design of an Inductively Based
Locating Method by Coil Couplings. 2022 Smart Systems Integration (SSI).
https://doi.org/10.1109/ssi56489.2022.9901416
bibtex: '@inproceedings{Lange_Hedayat_Kuhn_Hilleringmann_2022, title={Modeling and
Characterization of a 3D Environment for the Design of an Inductively Based Locating
Method by Coil Couplings}, DOI={10.1109/ssi56489.2022.9901416},
booktitle={2022 Smart Systems Integration (SSI)}, publisher={IEEE}, author={Lange,
Sven and Hedayat, Christian and Kuhn, Harald and Hilleringmann, Ulrich}, year={2022}
}'
chicago: Lange, Sven, Christian Hedayat, Harald Kuhn, and Ulrich Hilleringmann.
“Modeling and Characterization of a 3D Environment for the Design of an Inductively
Based Locating Method by Coil Couplings.” In 2022 Smart Systems Integration
(SSI). IEEE, 2022. https://doi.org/10.1109/ssi56489.2022.9901416.
ieee: 'S. Lange, C. Hedayat, H. Kuhn, and U. Hilleringmann, “Modeling and Characterization
of a 3D Environment for the Design of an Inductively Based Locating Method by
Coil Couplings,” 2022, doi: 10.1109/ssi56489.2022.9901416.'
mla: Lange, Sven, et al. “Modeling and Characterization of a 3D Environment for
the Design of an Inductively Based Locating Method by Coil Couplings.” 2022
Smart Systems Integration (SSI), IEEE, 2022, doi:10.1109/ssi56489.2022.9901416.
short: 'S. Lange, C. Hedayat, H. Kuhn, U. Hilleringmann, in: 2022 Smart Systems
Integration (SSI), IEEE, 2022.'
date_created: 2023-01-24T10:05:18Z
date_updated: 2023-03-23T13:27:07Z
department:
- _id: '59'
doi: 10.1109/ssi56489.2022.9901416
language:
- iso: eng
publication: 2022 Smart Systems Integration (SSI)
publication_status: published
publisher: IEEE
status: public
title: Modeling and Characterization of a 3D Environment for the Design of an Inductively
Based Locating Method by Coil Couplings
type: conference
user_id: '20179'
year: '2022'
...
---
_id: '30389'
abstract:
- lang: eng
text: Online solvers for a series of standard 1-D or 2-D problems in integrated
optics will be discussed. Implemented on the basis of HTML/JavaScript/SVG with
core routines compiled from well tested C++-sources, the quasi-analytical algorithms
require a computational load that can be handled easily even by current mobile
devices. So far the series covers the 1-D guided modes of dielectric multilayer
slab waveguides and the oblique plane wave reflection from these, the modes of
rectangular channel waveguides (in an approximation of effective indices), bend
modes of curved multilayer slabs, whispering-gallery resonances (“Quasi-Normal-Modes”)
supported by circular dielectric cavities, the hybrid modes of circular multi-step-index
optical fibers, bound and leaky modes of 1-D complex multilayers, including plasmonic
surface modes, and, with restrictions, quite general rectangular scattering problems
in 2-D.
author:
- first_name: Manfred
full_name: Hammer, Manfred
id: '48077'
last_name: Hammer
orcid: 0000-0002-6331-9348
citation:
ama: 'Hammer M. Small-scale online simulations in guided-wave photonics. In: García-Blanco
SM, Cheben P, eds. Integrated Optics: Devices, Materials, and Technologies
XXVI. SPIE; 2022:1200414. doi:10.1117/12.2612208'
apa: 'Hammer, M. (2022). Small-scale online simulations in guided-wave photonics.
In S. M. García-Blanco & P. Cheben (Eds.), Integrated Optics: Devices,
Materials, and Technologies XXVI (p. 1200414). SPIE. https://doi.org/10.1117/12.2612208'
bibtex: '@inproceedings{Hammer_2022, title={Small-scale online simulations in guided-wave
photonics}, DOI={10.1117/12.2612208},
booktitle={Integrated Optics: Devices, Materials, and Technologies XXVI}, publisher={SPIE},
author={Hammer, Manfred}, editor={García-Blanco, Sonia M. and Cheben, Pavel},
year={2022}, pages={1200414} }'
chicago: 'Hammer, Manfred. “Small-Scale Online Simulations in Guided-Wave Photonics.”
In Integrated Optics: Devices, Materials, and Technologies XXVI, edited
by Sonia M. García-Blanco and Pavel Cheben, 1200414. SPIE, 2022. https://doi.org/10.1117/12.2612208.'
ieee: 'M. Hammer, “Small-scale online simulations in guided-wave photonics,” in
Integrated Optics: Devices, Materials, and Technologies XXVI, 2022, p.
1200414, doi: 10.1117/12.2612208.'
mla: 'Hammer, Manfred. “Small-Scale Online Simulations in Guided-Wave Photonics.”
Integrated Optics: Devices, Materials, and Technologies XXVI, edited by
Sonia M. García-Blanco and Pavel Cheben, SPIE, 2022, p. 1200414, doi:10.1117/12.2612208.'
short: 'M. Hammer, in: S.M. García-Blanco, P. Cheben (Eds.), Integrated Optics:
Devices, Materials, and Technologies XXVI, SPIE, 2022, p. 1200414.'
date_created: 2022-03-21T10:17:30Z
date_updated: 2023-04-20T10:10:55Z
ddc:
- '530'
department:
- _id: '61'
- _id: '230'
- _id: '429'
doi: 10.1117/12.2612208
editor:
- first_name: Sonia M.
full_name: García-Blanco, Sonia M.
last_name: García-Blanco
- first_name: Pavel
full_name: Cheben, Pavel
last_name: Cheben
file:
- access_level: open_access
content_type: application/pdf
creator: fossie
date_created: 2022-03-22T18:05:02Z
date_updated: 2022-03-22T18:05:02Z
file_id: '30445'
file_name: 2022-03 Hammer - SPIE Photonics West 2022 - Small-scale online simulations
in guided-wave photonics (official version).pdf
file_size: 868473
relation: main_file
file_date_updated: 2022-03-22T18:05:02Z
has_accepted_license: '1'
keyword:
- tet_topic_waveguide
language:
- iso: eng
oa: '1'
page: '1200414'
project:
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '56'
name: 'TRR 142 - C: TRR 142 - Project Area C'
- _id: '75'
name: 'TRR 142 - C05: TRR 142 - Subproject C05'
publication: 'Integrated Optics: Devices, Materials, and Technologies XXVI'
publication_status: published
publisher: SPIE
status: public
title: Small-scale online simulations in guided-wave photonics
type: conference
user_id: '158'
year: '2022'
...
---
_id: '34210'
abstract:
- lang: eng
text: The application of the mechanical joining process clinching enables the joining
of sheet metals with a wide range of material-thickness configurations, which
is of interest in lightweight construction of multi-material structures. Each
material-thickness combination results in a joint with its own property profile
that is affected differently by variations. Manufacturing process-related effects
from preforming steps influence the geometric shape of a clinched joint as well
as its load-bearing capacity. During the clinching process high degrees of plastic
strain, increased temperatures and high strain rates occur. In this context, a
3D numerical model was developed which can represent the material-specific behaviour
during the process chain steps sheet metal forming, joining, and loading phase
in order to achieve a high predictive accuracy of the simulation. Besides to the
investigation of the prediction accuracy, the extent of the influence of individual
modelling aspects such as temperature and strain rate dependency is examined.
author:
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Bielak CR, Böhnke M, Bobbert M, Meschut G. Development of a Numerical 3D Model
for Analyzing Clinched Joints in Versatile Process Chains. In: The Minerals,
Metals & Materials Series. Springer International Publishing; 2022.
doi:10.1007/978-3-031-06212-4_15'
apa: Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Development
of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.
In The Minerals, Metals & Materials Series. Springer International
Publishing. https://doi.org/10.1007/978-3-031-06212-4_15
bibtex: '@inbook{Bielak_Böhnke_Bobbert_Meschut_2022, place={Cham}, title={Development
of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains},
DOI={10.1007/978-3-031-06212-4_15},
booktitle={The Minerals, Metals & Materials Series}, publisher={Springer
International Publishing}, author={Bielak, Christian Roman and Böhnke, Max and
Bobbert, Mathias and Meschut, Gerson}, year={2022} }'
chicago: 'Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut.
“Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile
Process Chains.” In The Minerals, Metals & Materials Series. Cham:
Springer International Publishing, 2022. https://doi.org/10.1007/978-3-031-06212-4_15.'
ieee: 'C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a Numerical
3D Model for Analyzing Clinched Joints in Versatile Process Chains,” in The
Minerals, Metals & Materials Series, Cham: Springer International
Publishing, 2022.'
mla: Bielak, Christian Roman, et al. “Development of a Numerical 3D Model for Analyzing
Clinched Joints in Versatile Process Chains.” The Minerals, Metals &
Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_15.
short: 'C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: The Minerals, Metals
& Materials Series, Springer International Publishing, Cham, 2022.'
date_created: 2022-12-05T20:56:01Z
date_updated: 2023-04-27T11:21:52Z
doi: 10.1007/978-3-031-06212-4_15
language:
- iso: eng
place: Cham
popular_science: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: The Minerals, Metals & Materials Series
publication_identifier:
isbn:
- '9783031062117'
- '9783031062124'
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile
Process Chains
type: book_chapter
user_id: '34782'
year: '2022'
...
---
_id: '30265'
abstract:
- lang: eng
text: 'Due to increasing globalization and rising quality requirements, the steel
and metal processing industry is facing growing cost and innovation pressure.
Not least because of their high lightweight potential, high-strength steel materials
are meeting the growing material requirements of steel and metal processing in
areas such as aerospace and medical technology. In particular, the tight tolerance
limits of applicable shape and dimensional accuracies pose a challenge in the
processing of high-strength steel strip materials. Improving the processability
of high-strength steel materials through the use of straighteners with set-up
assistance systems significantly increases the potential for competing with other
materials such as aluminum or magnesium alloys. '
author:
- first_name: Fabian
full_name: Bader, Fabian
id: '65204'
last_name: Bader
- first_name: Lukas
full_name: Bathelt, Lukas
last_name: Bathelt
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Bader F, Bathelt L, Djakow E, Henke C, Homberg W, Trächtler A. An approach
for an innovative 3d steel strip straightening machine for curvature and saber
compensation. In: ; 2022. doi:https://doi.org/10.4028/p-87wvu0'
apa: Bader, F., Bathelt, L., Djakow, E., Henke, C., Homberg, W., & Trächtler,
A. (2022). An approach for an innovative 3d steel strip straightening machine
for curvature and saber compensation. ESAFORM 2022, Braga / Portugal. https://doi.org/10.4028/p-87wvu0
bibtex: '@inproceedings{Bader_Bathelt_Djakow_Henke_Homberg_Trächtler_2022, title={An
approach for an innovative 3d steel strip straightening machine for curvature
and saber compensation}, DOI={https://doi.org/10.4028/p-87wvu0},
author={Bader, Fabian and Bathelt, Lukas and Djakow, Eugen and Henke, Christian
and Homberg, Werner and Trächtler, Ansgar}, year={2022} }'
chicago: Bader, Fabian, Lukas Bathelt, Eugen Djakow, Christian Henke, Werner Homberg,
and Ansgar Trächtler. “An Approach for an Innovative 3d Steel Strip Straightening
Machine for Curvature and Saber Compensation,” 2022. https://doi.org/10.4028/p-87wvu0.
ieee: 'F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, and A. Trächtler,
“An approach for an innovative 3d steel strip straightening machine for curvature
and saber compensation,” presented at the ESAFORM 2022, Braga / Portugal, 2022,
doi: https://doi.org/10.4028/p-87wvu0.'
mla: Bader, Fabian, et al. An Approach for an Innovative 3d Steel Strip Straightening
Machine for Curvature and Saber Compensation. 2022, doi:https://doi.org/10.4028/p-87wvu0.
short: 'F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, A. Trächtler, in:
2022.'
conference:
end_date: 2022-04-29
location: Braga / Portugal
name: ESAFORM 2022
start_date: 2022-04-26
date_created: 2022-03-11T11:08:06Z
date_updated: 2023-04-27T12:06:39Z
department:
- _id: '156'
- _id: '241'
- _id: '153'
doi: https://doi.org/10.4028/p-87wvu0
language:
- iso: eng
quality_controlled: '1'
status: public
title: An approach for an innovative 3d steel strip straightening machine for curvature
and saber compensation
type: conference
user_id: '552'
year: '2022'
...
---
_id: '41500'
abstract:
- lang: eng
text: Titanium alloys, especially β alloys, are favorable as implant materials
due to their promising combination of low Young’s modulus, high strength, corrosion
resistance, and biocompatibility. In particular, the low Young’s moduli reduce
the risk of stress shielding and implant loosening. The processing of Ti-24Nb-4Zr-8Sn
through laser powder bed fusion is presented. The specimens were heat-treated,
and the microstructure was investigated using X-ray diffraction, scanning electron
microscopy, and transmission electron microscopy. The mechanical properties were
determined by hardness and tensile tests. The microstructures reveal a mainly
β microstructure with α″ formation for high cooling rates and α precipitates after
moderate cooling rates or aging. The as-built and α″ phase containing conditions
exhibit a hardness around 225 HV5, yield strengths (YS) from 340 to 490 MPa, ultimate
tensile strengths (UTS) around 706 MPa, fracture elongations around 20%, and Young’s
moduli about 50 GPa. The α precipitates containing conditions reveal a hardness
around 297 HV5, YS around 812 MPa, UTS from 871 to 931 MPa, fracture elongations
around 12%, and Young’s moduli about 75 GPa. Ti-24Nb-4Zr-8Sn exhibits, depending
on the heat treatment, promising properties regarding the material behavior and
the opportunity to tailor the mechanical performance as a low modulus, high strength
implant material.
article_number: '3774'
author:
- first_name: Maxwell
full_name: Hein, Maxwell
id: '52771'
last_name: Hein
orcid: 0000-0002-3732-2236
- first_name: Nelson Filipe
full_name: Lopes Dias, Nelson Filipe
last_name: Lopes Dias
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Dominic
full_name: Stangier, Dominic
last_name: Stangier
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Hein M, Lopes Dias NF, Pramanik S, et al. Heat Treatments of Metastable β Titanium
Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion. Materials.
2022;15(11). doi:10.3390/ma15113774
apa: Hein, M., Lopes Dias, N. F., Pramanik, S., Stangier, D., Hoyer, K.-P., Tillmann,
W., & Schaper, M. (2022). Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn
Processed by Laser Powder Bed Fusion. Materials, 15(11), Article
3774. https://doi.org/10.3390/ma15113774
bibtex: '@article{Hein_Lopes Dias_Pramanik_Stangier_Hoyer_Tillmann_Schaper_2022,
title={Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed
by Laser Powder Bed Fusion}, volume={15}, DOI={10.3390/ma15113774},
number={113774}, journal={Materials}, publisher={MDPI AG}, author={Hein, Maxwell
and Lopes Dias, Nelson Filipe and Pramanik, Sudipta and Stangier, Dominic and
Hoyer, Kay-Peter and Tillmann, Wolfgang and Schaper, Mirko}, year={2022} }'
chicago: Hein, Maxwell, Nelson Filipe Lopes Dias, Sudipta Pramanik, Dominic Stangier,
Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “Heat Treatments of Metastable
β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials
15, no. 11 (2022). https://doi.org/10.3390/ma15113774.
ieee: 'M. Hein et al., “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn
Processed by Laser Powder Bed Fusion,” Materials, vol. 15, no. 11, Art.
no. 3774, 2022, doi: 10.3390/ma15113774.'
mla: Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn
Processed by Laser Powder Bed Fusion.” Materials, vol. 15, no. 11, 3774,
MDPI AG, 2022, doi:10.3390/ma15113774.
short: M. Hein, N.F. Lopes Dias, S. Pramanik, D. Stangier, K.-P. Hoyer, W. Tillmann,
M. Schaper, Materials 15 (2022).
date_created: 2023-02-02T14:28:54Z
date_updated: 2023-04-27T16:46:15Z
department:
- _id: '9'
- _id: '158'
doi: 10.3390/ma15113774
intvolume: ' 15'
issue: '11'
keyword:
- General Materials Science
language:
- iso: eng
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by
Laser Powder Bed Fusion
type: journal_article
user_id: '43720'
volume: 15
year: '2022'
...
---
_id: '30962'
abstract:
- lang: eng
text: Clinching as a mechanical joining process has become established
in many areas of car body. In order to predict relevant properties of clinched
joints and to ensure the reliability of the process, it is numerically simulated
during the product development process. The prediction accuracy of the simulated
process depends on the implemented friction model. Therefore, a new method for
determining friction coefficients in sheet metal materials was developed and tested.
The aim of this study is the numerical investigation of this experimental method
by means of FE simulation. The experimental setup is modelled in a 3D numerical
simulation taking into account the process parameters varying in the experiment,
such as geometric properties, contact pressure and contact velocity. Furthermore,
the contact description of the model is calibrated via the experimentally determined
friction coefficients according to clinch-relevant parameter space. It is shown
that the assumptions made in the determination of the experimental data in preliminary
work are valid. In addition, it is investigated to what extent the standard Coulomb
friction model in the FEM can reproduce the results of the experimental method.
article_number: '146442072210934'
author:
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical investigation of a friction
test to determine the friction coefficients for the clinching process. Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications. Published online 2022. doi:10.1177/14644207221093468'
apa: 'Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Numerical
investigation of a friction test to determine the friction coefficients for
the clinching process. Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications, Article 146442072210934.
https://doi.org/10.1177/14644207221093468'
bibtex: '@article{Bielak_Böhnke_Bobbert_Meschut_2022, title={Numerical investigation
of a friction test to determine the friction coefficients for the clinching
process}, DOI={10.1177/14644207221093468},
number={146442072210934}, journal={Proceedings of the Institution of Mechanical
Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE
Publications}, author={Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias
and Meschut, Gerson}, year={2022} }'
chicago: 'Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut.
“Numerical Investigation of a Friction Test to Determine the Friction Coefficients
for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221093468.'
ieee: 'C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical investigation
of a friction test to determine the friction coefficients for the clinching
process,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications, Art. no. 146442072210934, 2022, doi:
10.1177/14644207221093468.'
mla: 'Bielak, Christian Roman, et al. “Numerical Investigation of a Friction Test
to Determine the Friction Coefficients for the Clinching Process.” Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.'
short: 'C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
(2022).'
date_created: 2022-04-27T08:58:11Z
date_updated: 2023-04-28T11:31:35Z
department:
- _id: '157'
- _id: '630'
doi: 10.1177/14644207221093468
keyword:
- Mechanical Engineering
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications'
publication_identifier:
issn:
- 1464-4207
- 2041-3076
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: Numerical investigation of a friction test to determine the friction coefficients
for the clinching process
type: journal_article
user_id: '34782'
year: '2022'
...
---
_id: '29951'
abstract:
- lang: eng
text: The components of a body in white consist of many individual thin-walled sheet
metal parts, which usually are manufactured in deep-drawing processes. In general,
the conditions in a deep-drawing process change due to changing tribology conditions,
varying degrees of spring back, or scattering material properties in the sheet
blanks, which affects the resulting pre-strain. Mechanical joining processes,
especially clinching, are influenced by these process-related pre-strains. The
final geometric shape of a clinched joint is affected to a significant level by
the prior material deformation when joining with constant process parameters.
That leads to a change in the stiffness and force transmission in the clinched
joint due to the different geometric dimensions, such as interlock, neck thickness
and bottom thickness, which directly affect the load bearing capacity. Here, the
influence of the pre-straining in the deep drawing process on the force distribution
in clinch points in an automotive assembly is investigated by finite-element models
numerically. In further studies, the results are implemented in an optimization
tool for designing clinched components. The methodology starts with a pre-straining
of metal sheets. This step is followed by 2D rotationally symmetric forming simulations
of the joining process. The resulting mesh of each forming simulation is rotated
and 3D models are obtained. The clinched joint solid model with pre-strains is
used further to determine the joint stiffnesses. With the simulation of the same
test set-up with an equivalent point-connector model, the equivalent stiffness
for each pre-strain combination is determined. Simulations are performed on a
clinched component to assess the influence of pre-strain and sheet thinning on
the clinched joint loadings by using the equivalent stiffnesses. The investigations
clearly show that for the selected component, the loadings at the clinch points
are dependent on the sheet thinning and the stiffnesses due to pre-strain. The
magnitude of the influence varies depending on the quantity considered. For example,
the shear force is more sensitive to the joint stiffness than to the sheet thinning.
author:
- first_name: Sven
full_name: Martin, Sven
id: '38177'
last_name: Martin
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Martin S, Bielak CR, Bobbert M, Tröster T, Meschut G. Numerical investigation
of the clinched joint loadings considering the initial pre-strain in the joining
area. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01103-w
apa: Martin, S., Bielak, C. R., Bobbert, M., Tröster, T., & Meschut, G. (2022).
Numerical investigation of the clinched joint loadings considering the initial
pre-strain in the joining area. Production Engineering. https://doi.org/10.1007/s11740-021-01103-w
bibtex: '@article{Martin_Bielak_Bobbert_Tröster_Meschut_2022, title={Numerical investigation
of the clinched joint loadings considering the initial pre-strain in the joining
area}, DOI={10.1007/s11740-021-01103-w},
journal={Production Engineering}, publisher={Springer Science and Business Media
LLC}, author={Martin, Sven and Bielak, Christian Roman and Bobbert, Mathias and
Tröster, Thomas and Meschut, Gerson}, year={2022} }'
chicago: Martin, Sven, Christian Roman Bielak, Mathias Bobbert, Thomas Tröster,
and Gerson Meschut. “Numerical Investigation of the Clinched Joint Loadings Considering
the Initial Pre-Strain in the Joining Area.” Production Engineering, 2022.
https://doi.org/10.1007/s11740-021-01103-w.
ieee: 'S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical
investigation of the clinched joint loadings considering the initial pre-strain
in the joining area,” Production Engineering, 2022, doi: 10.1007/s11740-021-01103-w.'
mla: Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings
Considering the Initial Pre-Strain in the Joining Area.” Production Engineering,
Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
short: S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering
(2022).
date_created: 2022-02-22T12:52:09Z
date_updated: 2023-04-28T11:57:22Z
department:
- _id: '321'
- _id: '149'
- _id: '630'
- _id: '157'
doi: 10.1007/s11740-021-01103-w
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007/s11740-021-01103-w
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
publication: Production Engineering
publication_identifier:
issn:
- 0944-6524
- 1863-7353
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Numerical investigation of the clinched joint loadings considering the initial
pre-strain in the joining area
type: journal_article
user_id: '38177'
year: '2022'
...
---
_id: '44634'
author:
- first_name: M. M.
full_name: Roth, M. M.
last_name: Roth
- first_name: H. B.
full_name: Holmarsdottir, H. B.
last_name: Holmarsdottir
- first_name: Amelie
full_name: Labusch, Amelie
id: '65599'
last_name: Labusch
- first_name: Birgit
full_name: Eickelmann, Birgit
id: '40387'
last_name: Eickelmann
- first_name: D.
full_name: Parsanoglou, D.
last_name: Parsanoglou
citation:
ama: Roth MM, Holmarsdottir HB, Labusch A, Eickelmann B, Parsanoglou D. Good
Practice Toolkit for Improving Practice and Policies (DigiGen-Working Paper).;
2022.
apa: Roth, M. M., Holmarsdottir, H. B., Labusch, A., Eickelmann, B., & Parsanoglou,
D. (2022). Good practice toolkit for improving practice and policies (DigiGen-working
paper).
bibtex: '@book{Roth_Holmarsdottir_Labusch_Eickelmann_Parsanoglou_2022, title={Good
practice toolkit for improving practice and policies (DigiGen-working paper).},
author={Roth, M. M. and Holmarsdottir, H. B. and Labusch, Amelie and Eickelmann,
Birgit and Parsanoglou, D.}, year={2022} }'
chicago: Roth, M. M., H. B. Holmarsdottir, Amelie Labusch, Birgit Eickelmann, and
D. Parsanoglou. Good Practice Toolkit for Improving Practice and Policies (DigiGen-Working
Paper)., 2022.
ieee: M. M. Roth, H. B. Holmarsdottir, A. Labusch, B. Eickelmann, and D. Parsanoglou,
Good practice toolkit for improving practice and policies (DigiGen-working
paper). 2022.
mla: Roth, M. M., et al. Good Practice Toolkit for Improving Practice and Policies
(DigiGen-Working Paper). 2022.
short: M.M. Roth, H.B. Holmarsdottir, A. Labusch, B. Eickelmann, D. Parsanoglou,
Good Practice Toolkit for Improving Practice and Policies (DigiGen-Working Paper).,
2022.
date_created: 2023-05-08T12:07:00Z
date_updated: 2023-05-08T12:07:04Z
department:
- _id: '462'
language:
- iso: eng
status: public
title: Good practice toolkit for improving practice and policies (DigiGen-working
paper).
type: report
user_id: '21240'
year: '2022'
...
---
_id: '32389'
author:
- first_name: Moritz Sebastian
full_name: Rossel, Moritz Sebastian
id: '44503'
last_name: Rossel
- first_name: Gerson
full_name: Meschut, Gerson
last_name: Meschut
citation:
ama: 'Rossel MS, Meschut G. Increasing the Prediction Quality of Clinching Process
Simulation with Extensible Die by Means of Friction Modeling as a Function of
the Local Joining Process Parameters. In: ; 2022.'
apa: Rossel, M. S., & Meschut, G. (2022). Increasing the Prediction Quality
of Clinching Process Simulation with Extensible Die by Means of Friction Modeling
as a Function of the Local Joining Process Parameters. The 12th International
Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
(NUMISHEET 2022), Toronto.
bibtex: '@inproceedings{Rossel_Meschut_2022, title={Increasing the Prediction Quality
of Clinching Process Simulation with Extensible Die by Means of Friction Modeling
as a Function of the Local Joining Process Parameters}, author={Rossel, Moritz
Sebastian and Meschut, Gerson}, year={2022} }'
chicago: Rossel, Moritz Sebastian, and Gerson Meschut. “Increasing the Prediction
Quality of Clinching Process Simulation with Extensible Die by Means of Friction
Modeling as a Function of the Local Joining Process Parameters,” 2022.
ieee: M. S. Rossel and G. Meschut, “Increasing the Prediction Quality of Clinching
Process Simulation with Extensible Die by Means of Friction Modeling as a Function
of the Local Joining Process Parameters,” presented at the The 12th International
Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
(NUMISHEET 2022), Toronto, 2022.
mla: Rossel, Moritz Sebastian, and Gerson Meschut. Increasing the Prediction
Quality of Clinching Process Simulation with Extensible Die by Means of Friction
Modeling as a Function of the Local Joining Process Parameters. 2022.
short: 'M.S. Rossel, G. Meschut, in: 2022.'
conference:
end_date: 2022-07-14
location: Toronto
name: The 12th International Conference and Workshop on Numerical Simulation of
3D Sheet Metal Forming Processes (NUMISHEET 2022)
start_date: 2022-07-10
date_created: 2022-07-18T06:18:27Z
date_updated: 2023-06-09T08:23:02Z
department:
- _id: '157'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Increasing the Prediction Quality of Clinching Process Simulation with Extensible
Die by Means of Friction Modeling as a Function of the Local Joining Process Parameters
type: conference_abstract
user_id: '44503'
year: '2022'
...
---
_id: '45679'
author:
- first_name: Julia
full_name: Bruns, Julia
id: '72183'
last_name: Bruns
orcid: https://orcid.org/0000-0002-6604-5864
- first_name: D.
full_name: Reuter, D.
last_name: Reuter
citation:
ama: 'Bruns J, Reuter D. „Ich hab als Erstes die angeguckt“ – Muster- und Strukturerkennung
mit Eye-Tracking besser verstehen? In: Beiträge zum Mathematikunterricht 2022.
WTM-Verlag; 2022.'
apa: Bruns, J., & Reuter, D. (2022). „Ich hab als Erstes die angeguckt“ – Muster-
und Strukturerkennung mit Eye-Tracking besser verstehen? Beiträge zum Mathematikunterricht
2022.
bibtex: '@inproceedings{Bruns_Reuter_2022, title={„Ich hab als Erstes die angeguckt“
– Muster- und Strukturerkennung mit Eye-Tracking besser verstehen?}, booktitle={Beiträge
zum Mathematikunterricht 2022}, publisher={WTM-Verlag}, author={Bruns, Julia and
Reuter, D.}, year={2022} }'
chicago: Bruns, Julia, and D. Reuter. “„Ich hab als Erstes die angeguckt“ – Muster-
und Strukturerkennung mit Eye-Tracking besser verstehen?” In Beiträge zum Mathematikunterricht
2022. WTM-Verlag, 2022.
ieee: J. Bruns and D. Reuter, “„Ich hab als Erstes die angeguckt“ – Muster- und
Strukturerkennung mit Eye-Tracking besser verstehen?,” 2022.
mla: Bruns, Julia, and D. Reuter. “„Ich hab als Erstes die angeguckt“ – Muster-
und Strukturerkennung mit Eye-Tracking besser verstehen?” Beiträge zum Mathematikunterricht
2022, WTM-Verlag, 2022.
short: 'J. Bruns, D. Reuter, in: Beiträge zum Mathematikunterricht 2022, WTM-Verlag,
2022.'
date_created: 2023-06-20T18:27:40Z
date_updated: 2023-06-20T18:27:55Z
department:
- _id: '97'
- _id: '611'
language:
- iso: ger
publication: Beiträge zum Mathematikunterricht 2022
publication_status: published
publisher: WTM-Verlag
status: public
title: „Ich hab als Erstes die angeguckt“ – Muster- und Strukturerkennung mit Eye-Tracking
besser verstehen?
type: conference
user_id: '49063'
year: '2022'
...
---
_id: '45347'
author:
- first_name: Jana
full_name: Herding, Jana
id: '34404'
last_name: Herding
- first_name: A.M.
full_name: Kamin, A.M.
last_name: Kamin
- first_name: P.
full_name: Büker, P.
last_name: Büker
- first_name: K.
full_name: Glawe, K.
last_name: Glawe
- first_name: ' I.'
full_name: Menke, I.
last_name: Menke
- first_name: F.
full_name: Schaper, F.
last_name: Schaper
citation:
ama: 'Herding J, Kamin AM, Büker P, Glawe K, Menke I., Schaper F. Inklusions- und
digitalisierungsbezogene Kompetenzen im Lehramtsstudium erwerben – Konzeption,
Erprobung und Evaluation der Lehr-/Lernumgebung inklud.nrw. In: Ferencik-Lehmkuhl
D, Huynh I, Laubmeister C, et al., eds. Inklusion digital! Chancen und Herausforderungen
inklusiver Bildung im Kontext von Digitalisierung. Verlag Julius Klinkhardt;
2022:228-246.'
apa: Herding, J., Kamin, A. M., Büker, P., Glawe, K., Menke, I., & Schaper,
F. (2022). Inklusions- und digitalisierungsbezogene Kompetenzen im Lehramtsstudium
erwerben – Konzeption, Erprobung und Evaluation der Lehr-/Lernumgebung inklud.nrw.
In D. Ferencik-Lehmkuhl, I. Huynh, C. Laubmeister, C. Lee, C. Melzer, I. Schwank,
H. Weck, & K. Ziemen (Eds.), Inklusion digital! Chancen und Herausforderungen
inklusiver Bildung im Kontext von Digitalisierung (pp. 228–246). Verlag Julius
Klinkhardt.
bibtex: '@inbook{Herding_Kamin_Büker_Glawe_Menke_Schaper_2022, place={Bad Heilbrunn},
title={Inklusions- und digitalisierungsbezogene Kompetenzen im Lehramtsstudium
erwerben – Konzeption, Erprobung und Evaluation der Lehr-/Lernumgebung inklud.nrw},
booktitle={Inklusion digital! Chancen und Herausforderungen inklusiver Bildung
im Kontext von Digitalisierung}, publisher={Verlag Julius Klinkhardt}, author={Herding,
Jana and Kamin, A.M. and Büker, P. and Glawe, K. and Menke, I. and Schaper, F.},
editor={Ferencik-Lehmkuhl, D. and Huynh, I. and Laubmeister, C. and Lee, C. and
Melzer, C. and Schwank, I. and Weck, H. and Ziemen, K.}, year={2022}, pages={228–246}
}'
chicago: 'Herding, Jana, A.M. Kamin, P. Büker, K. Glawe, I. Menke, and F. Schaper.
“Inklusions- und digitalisierungsbezogene Kompetenzen im Lehramtsstudium erwerben
– Konzeption, Erprobung und Evaluation der Lehr-/Lernumgebung inklud.nrw.” In
Inklusion digital! Chancen und Herausforderungen inklusiver Bildung im Kontext
von Digitalisierung, edited by D. Ferencik-Lehmkuhl, I. Huynh, C. Laubmeister,
C. Lee, C. Melzer, I. Schwank, H. Weck, and K. Ziemen, 228–46. Bad Heilbrunn:
Verlag Julius Klinkhardt, 2022.'
ieee: 'J. Herding, A. M. Kamin, P. Büker, K. Glawe, I. Menke, and F. Schaper, “Inklusions-
und digitalisierungsbezogene Kompetenzen im Lehramtsstudium erwerben – Konzeption,
Erprobung und Evaluation der Lehr-/Lernumgebung inklud.nrw,” in Inklusion digital!
Chancen und Herausforderungen inklusiver Bildung im Kontext von Digitalisierung,
D. Ferencik-Lehmkuhl, I. Huynh, C. Laubmeister, C. Lee, C. Melzer, I. Schwank,
H. Weck, and K. Ziemen, Eds. Bad Heilbrunn: Verlag Julius Klinkhardt, 2022, pp.
228–246.'
mla: Herding, Jana, et al. “Inklusions- und digitalisierungsbezogene Kompetenzen
im Lehramtsstudium erwerben – Konzeption, Erprobung und Evaluation der Lehr-/Lernumgebung
inklud.nrw.” Inklusion digital! Chancen und Herausforderungen inklusiver Bildung
im Kontext von Digitalisierung, edited by D. Ferencik-Lehmkuhl et al., Verlag
Julius Klinkhardt, 2022, pp. 228–46.
short: 'J. Herding, A.M. Kamin, P. Büker, K. Glawe, I. Menke, F. Schaper, in: D.
Ferencik-Lehmkuhl, I. Huynh, C. Laubmeister, C. Lee, C. Melzer, I. Schwank, H.
Weck, K. Ziemen (Eds.), Inklusion digital! Chancen und Herausforderungen inklusiver
Bildung im Kontext von Digitalisierung, Verlag Julius Klinkhardt, Bad Heilbrunn,
2022, pp. 228–246.'
date_created: 2023-05-29T18:00:12Z
date_updated: 2023-06-20T19:34:40Z
department:
- _id: '458'
editor:
- first_name: D.
full_name: Ferencik-Lehmkuhl, D.
last_name: Ferencik-Lehmkuhl
- first_name: I.
full_name: Huynh, I.
last_name: Huynh
- first_name: C.
full_name: Laubmeister, C.
last_name: Laubmeister
- first_name: C.
full_name: Lee, C.
last_name: Lee
- first_name: C.
full_name: Melzer, C.
last_name: Melzer
- first_name: I.
full_name: Schwank, I.
last_name: Schwank
- first_name: H.
full_name: Weck, H.
last_name: Weck
- first_name: K.
full_name: Ziemen, K.
last_name: Ziemen
language:
- iso: ger
page: 228-246
place: Bad Heilbrunn
publication: Inklusion digital! Chancen und Herausforderungen inklusiver Bildung im
Kontext von Digitalisierung
publication_status: published
publisher: Verlag Julius Klinkhardt
status: public
title: Inklusions- und digitalisierungsbezogene Kompetenzen im Lehramtsstudium erwerben
– Konzeption, Erprobung und Evaluation der Lehr-/Lernumgebung inklud.nrw
type: book_chapter
user_id: '49063'
year: '2022'
...
---
_id: '46121'
article_number: '094505'
author:
- first_name: Luis
full_name: Altenkort, Luis
last_name: Altenkort
- first_name: Alexander M.
full_name: Eller, Alexander M.
last_name: Eller
- first_name: O.
full_name: Kaczmarek, O.
last_name: Kaczmarek
- first_name: Lukas
full_name: Mazur, Lukas
id: '90492'
last_name: Mazur
orcid: ' 0000-0001-6304-7082'
- first_name: Guy D.
full_name: Moore, Guy D.
last_name: Moore
- first_name: Hai-Tao
full_name: Shu, Hai-Tao
last_name: Shu
citation:
ama: Altenkort L, Eller AM, Kaczmarek O, Mazur L, Moore GD, Shu H-T. Lattice QCD
noise reduction for bosonic correlators through blocking. Physical Review D.
2022;105(9). doi:10.1103/physrevd.105.094505
apa: Altenkort, L., Eller, A. M., Kaczmarek, O., Mazur, L., Moore, G. D., &
Shu, H.-T. (2022). Lattice QCD noise reduction for bosonic correlators through
blocking. Physical Review D, 105(9), Article 094505. https://doi.org/10.1103/physrevd.105.094505
bibtex: '@article{Altenkort_Eller_Kaczmarek_Mazur_Moore_Shu_2022, title={Lattice
QCD noise reduction for bosonic correlators through blocking}, volume={105}, DOI={10.1103/physrevd.105.094505},
number={9094505}, journal={Physical Review D}, publisher={American Physical Society
(APS)}, author={Altenkort, Luis and Eller, Alexander M. and Kaczmarek, O. and
Mazur, Lukas and Moore, Guy D. and Shu, Hai-Tao}, year={2022} }'
chicago: Altenkort, Luis, Alexander M. Eller, O. Kaczmarek, Lukas Mazur, Guy D.
Moore, and Hai-Tao Shu. “Lattice QCD Noise Reduction for Bosonic Correlators through
Blocking.” Physical Review D 105, no. 9 (2022). https://doi.org/10.1103/physrevd.105.094505.
ieee: 'L. Altenkort, A. M. Eller, O. Kaczmarek, L. Mazur, G. D. Moore, and H.-T.
Shu, “Lattice QCD noise reduction for bosonic correlators through blocking,” Physical
Review D, vol. 105, no. 9, Art. no. 094505, 2022, doi: 10.1103/physrevd.105.094505.'
mla: Altenkort, Luis, et al. “Lattice QCD Noise Reduction for Bosonic Correlators
through Blocking.” Physical Review D, vol. 105, no. 9, 094505, American
Physical Society (APS), 2022, doi:10.1103/physrevd.105.094505.
short: L. Altenkort, A.M. Eller, O. Kaczmarek, L. Mazur, G.D. Moore, H.-T. Shu,
Physical Review D 105 (2022).
date_created: 2023-07-24T10:58:37Z
date_updated: 2023-07-26T09:23:17Z
department:
- _id: '27'
doi: 10.1103/physrevd.105.094505
intvolume: ' 105'
issue: '9'
language:
- iso: eng
publication: Physical Review D
publication_identifier:
issn:
- 2470-0010
- 2470-0029
publication_status: published
publisher: American Physical Society (APS)
quality_controlled: '1'
status: public
title: Lattice QCD noise reduction for bosonic correlators through blocking
type: journal_article
user_id: '90492'
volume: 105
year: '2022'
...
---
_id: '40987'
abstract:
- lang: eng
text: Catalysts.
2022;12(6). doi:10.3390/catal12060675
apa: Schlicher, S., Prinz, N., Bürger, J., Omlor, A., Singer, C., Zobel, M., Schoch,
R., Lindner, J. K. N., Schünemann, V., Kureti, S., & Bauer, M. (2022). Quality
or Quantity? How Structural Parameters Affect Catalytic Activity of Iron Oxides
for CO Oxidation. Catalysts, 12(6), Article 675. https://doi.org/10.3390/catal12060675
bibtex: '@article{Schlicher_Prinz_Bürger_Omlor_Singer_Zobel_Schoch_Lindner_Schünemann_Kureti_et
al._2022, title={Quality or Quantity? How Structural Parameters Affect Catalytic
Activity of Iron Oxides for CO Oxidation}, volume={12}, DOI={10.3390/catal12060675},
number={6675}, journal={Catalysts}, publisher={MDPI AG}, author={Schlicher, Steffen
and Prinz, Nils and Bürger, Julius and Omlor, Andreas and Singer, Christian and
Zobel, Mirijam and Schoch, Roland and Lindner, Jörg K. N. and Schünemann, Volker
and Kureti, Sven and et al.}, year={2022} }'
chicago: Schlicher, Steffen, Nils Prinz, Julius Bürger, Andreas Omlor, Christian
Singer, Mirijam Zobel, Roland Schoch, et al. “Quality or Quantity? How Structural
Parameters Affect Catalytic Activity of Iron Oxides for CO Oxidation.” Catalysts
12, no. 6 (2022). https://doi.org/10.3390/catal12060675.
ieee: 'S. Schlicher et al., “Quality or Quantity? How Structural Parameters
Affect Catalytic Activity of Iron Oxides for CO Oxidation,” Catalysts,
vol. 12, no. 6, Art. no. 675, 2022, doi: 10.3390/catal12060675.'
mla: Schlicher, Steffen, et al. “Quality or Quantity? How Structural Parameters
Affect Catalytic Activity of Iron Oxides for CO Oxidation.” Catalysts,
vol. 12, no. 6, 675, MDPI AG, 2022, doi:10.3390/catal12060675.
short: S. Schlicher, N. Prinz, J. Bürger, A. Omlor, C. Singer, M. Zobel, R. Schoch,
J.K.N. Lindner, V. Schünemann, S. Kureti, M. Bauer, Catalysts 12 (2022).
date_created: 2023-01-30T16:24:41Z
date_updated: 2023-08-17T06:57:31Z
department:
- _id: '35'
- _id: '306'
- _id: '15'
doi: 10.3390/catal12060675
intvolume: ' 12'
issue: '6'
keyword:
- Physical and Theoretical Chemistry
- Catalysis
- General Environmental Science
- Key
language:
- iso: eng
publication: Catalysts
publication_identifier:
issn:
- 2073-4344
publication_status: published
publisher: MDPI AG
status: public
title: Quality or Quantity? How Structural Parameters Affect Catalytic Activity of
Iron Oxides for CO Oxidation
type: journal_article
user_id: '14931'
volume: 12
year: '2022'
...
---
_id: '31871'
author:
- first_name: Ivo
full_name: Kletetzka, Ivo
id: '50769'
last_name: Kletetzka
- first_name: Sven Helge
full_name: Klippstein, Sven Helge
id: '71545'
last_name: Klippstein
citation:
ama: 'Kletetzka I, Klippstein SH. Pulver im 3D-Druck - von Mascarabürsten bis zum
Interieur eines Mini-Coopers (Vortrag). In: 3D-DRUCK HAUTNAH - Der Einfluss
einer Zukunftstechnologie auf unser Leben . Universität Paderborn; 2022.'
apa: Kletetzka, I., & Klippstein, S. H. (2022). Pulver im 3D-Druck - von Mascarabürsten
bis zum Interieur eines Mini-Coopers (Vortrag). 3D-DRUCK HAUTNAH - Der Einfluss
einer Zukunftstechnologie auf unser Leben . 3D-DRUCK HAUTNAH - Der Einfluss
einer Zukunftstechnologie auf unser Leben, Paderborn.
bibtex: '@inproceedings{Kletetzka_Klippstein_2022, title={Pulver im 3D-Druck - von
Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag)}, booktitle={3D-DRUCK
HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben }, publisher={Universität
Paderborn}, author={Kletetzka, Ivo and Klippstein, Sven Helge}, year={2022} }'
chicago: Kletetzka, Ivo, and Sven Helge Klippstein. “Pulver im 3D-Druck - von Mascarabürsten
bis zum Interieur eines Mini-Coopers (Vortrag).” In 3D-DRUCK HAUTNAH - Der
Einfluss einer Zukunftstechnologie auf unser Leben . Universität Paderborn,
2022.
ieee: I. Kletetzka and S. H. Klippstein, “Pulver im 3D-Druck - von Mascarabürsten
bis zum Interieur eines Mini-Coopers (Vortrag),” presented at the 3D-DRUCK HAUTNAH
- Der Einfluss einer Zukunftstechnologie auf unser Leben, Paderborn, 2022.
mla: Kletetzka, Ivo, and Sven Helge Klippstein. “Pulver im 3D-Druck - von Mascarabürsten
bis zum Interieur eines Mini-Coopers (Vortrag).” 3D-DRUCK HAUTNAH - Der Einfluss
einer Zukunftstechnologie auf unser Leben , Universität Paderborn, 2022.
short: 'I. Kletetzka, S.H. Klippstein, in: 3D-DRUCK HAUTNAH - Der Einfluss einer
Zukunftstechnologie auf unser Leben , Universität Paderborn, 2022.'
conference:
end_date: 2022-06-11
location: Paderborn
name: 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben
start_date: 2022-06-11
date_created: 2022-06-13T14:10:35Z
date_updated: 2023-09-07T11:54:49Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
- _id: '9'
language:
- iso: ger
publication: '3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser
Leben '
publication_status: published
publisher: Universität Paderborn
status: public
title: Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers
(Vortrag)
type: conference_abstract
user_id: '50769'
year: '2022'
...
---
_id: '59617'
abstract:
- lang: eng
text: 'There is an increasing interest in sensing applications for a variety
of analytes in aqueous environments, as conventional methods do not work reliably
under humid conditions or they require complex equipment with experienced operators.
Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad
dynamic ranges. Experiments on their robustness, reliability, and reusability
have indicated the possible long-term applications of these systems in a variety
of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental
testing. It is possible to produce hydrogels, which, upon sensing a specific analyte,
can adsorb it onto their 3D-structure and can therefore be used to remove them
from a given environment. High specificity can be obtained by using molecularly
imprinted polymers. Typical detection principles involve optical methods including
fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals,
as well as electrochemical methods. Here, we explore the current research utilizing
hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for
detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying
environmental contaminants in aqueous environments.'
article_number: '768'
author:
- first_name: Katharina
full_name: Völlmecke, Katharina
last_name: Völlmecke
- first_name: Rowshon
full_name: Afroz, Rowshon
last_name: Afroz
- first_name: Sascha
full_name: Bierbach, Sascha
last_name: Bierbach
- first_name: Lee Josephine
full_name: Brenker, Lee Josephine
last_name: Brenker
- first_name: Sebastian
full_name: Frücht, Sebastian
last_name: Frücht
- first_name: Alexandra
full_name: Glass, Alexandra
last_name: Glass
- first_name: Ryland
full_name: Giebelhaus, Ryland
last_name: Giebelhaus
- first_name: Axel
full_name: Hoppe, Axel
id: '62844'
last_name: Hoppe
- first_name: Karen
full_name: Kanemaru, Karen
last_name: Kanemaru
- first_name: Michal
full_name: Lazarek, Michal
last_name: Lazarek
- first_name: Lukas
full_name: Rabbe, Lukas
last_name: Rabbe
- first_name: Longfei
full_name: Song, Longfei
last_name: Song
- first_name: Andrea
full_name: Velasco Suarez, Andrea
last_name: Velasco Suarez
- first_name: Shuang
full_name: Wu, Shuang
last_name: Wu
- first_name: Michael
full_name: Serpe, Michael
last_name: Serpe
- first_name: Dirk
full_name: Kuckling, Dirk
id: '287'
last_name: Kuckling
citation:
ama: Völlmecke K, Afroz R, Bierbach S, et al. Hydrogel-Based Biosensors. Gels.
2022;8(12). doi:10.3390/gels8120768
apa: Völlmecke, K., Afroz, R., Bierbach, S., Brenker, L. J., Frücht, S., Glass,
A., Giebelhaus, R., Hoppe, A., Kanemaru, K., Lazarek, M., Rabbe, L., Song, L.,
Velasco Suarez, A., Wu, S., Serpe, M., & Kuckling, D. (2022). Hydrogel-Based
Biosensors. Gels, 8(12), Article 768. https://doi.org/10.3390/gels8120768
bibtex: '@article{Völlmecke_Afroz_Bierbach_Brenker_Frücht_Glass_Giebelhaus_Hoppe_Kanemaru_Lazarek_et
al._2022, title={Hydrogel-Based Biosensors}, volume={8}, DOI={10.3390/gels8120768},
number={12768}, journal={Gels}, publisher={MDPI AG}, author={Völlmecke, Katharina
and Afroz, Rowshon and Bierbach, Sascha and Brenker, Lee Josephine and Frücht,
Sebastian and Glass, Alexandra and Giebelhaus, Ryland and Hoppe, Axel and Kanemaru,
Karen and Lazarek, Michal and et al.}, year={2022} }'
chicago: Völlmecke, Katharina, Rowshon Afroz, Sascha Bierbach, Lee Josephine Brenker,
Sebastian Frücht, Alexandra Glass, Ryland Giebelhaus, et al. “Hydrogel-Based Biosensors.”
Gels 8, no. 12 (2022). https://doi.org/10.3390/gels8120768.
ieee: 'K. Völlmecke et al., “Hydrogel-Based Biosensors,” Gels, vol.
8, no. 12, Art. no. 768, 2022, doi: 10.3390/gels8120768.'
mla: Völlmecke, Katharina, et al. “Hydrogel-Based Biosensors.” Gels, vol.
8, no. 12, 768, MDPI AG, 2022, doi:10.3390/gels8120768.
short: K. Völlmecke, R. Afroz, S. Bierbach, L.J. Brenker, S. Frücht, A. Glass, R.
Giebelhaus, A. Hoppe, K. Kanemaru, M. Lazarek, L. Rabbe, L. Song, A. Velasco Suarez,
S. Wu, M. Serpe, D. Kuckling, Gels 8 (2022).
date_created: 2025-04-22T05:59:29Z
date_updated: 2025-04-22T06:12:07Z
department:
- _id: '311'
doi: 10.3390/gels8120768
intvolume: ' 8'
issue: '12'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2310-2861/8/12/768
oa: '1'
publication: Gels
publication_identifier:
issn:
- 2310-2861
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Hydrogel-Based Biosensors
type: journal_article
user_id: '62844'
volume: 8
year: '2022'
...