---
_id: '63512'
abstract:
- lang: eng
  text: "The state of the art shows that PBF-LB/M offers great potential for pressure-loaded
    parts, with significant weight reductions and simultaneous optimization of flow
    resistance. This study is aimed at applying existing calculation methods for pressure-loaded
    parts to additively manufactured pipe structures, considering the two materials
    EN AC-43000 (3.2381, AlSi10Mg) and AISI 316L (1.4404, X2CrNiMo17-12-2). For this
    purpose, systematic tensile tests are carried out for both materials. In addition,
    a statistical evaluation is performed to determine the design-relevant strength
    characteristics with a survival probability Ps of 97.5 % for both materials in
    the as-built and heat-treated condition.\r\nPipe specimens are manufactured, half
    of which are heat treated, geometrically measured and then subjected to a burst
    pressure test to experimentally determine the failure-critical internal pressure.
    These results are compared with calculated burst pressures. The calculations are
    based on the application-relevant methods identified in this study, considering
    the strength values determined for the respective material condition. This comparison
    is used to assess the suitability of the calculation methods for additively manufactured
    pipe structures, based on the materials investigated."
article_number: '105753'
author:
- first_name: Thorsten
  full_name: Koers, Thorsten
  id: '38077'
  last_name: Koers
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
- first_name: Christian
  full_name: Bödger, Christian
  id: '93904'
  last_name: Bödger
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Koers T, Magyar B, Bödger C, Tröster T. Analytical and experimental determination
    of the failure-critical pressure of pipe structures manufactured by PBF-LB/M.
    <i>International Journal of Pressure Vessels and Piping</i>. Published online
    2026. doi:<a href="https://doi.org/10.1016/j.ijpvp.2026.105753">10.1016/j.ijpvp.2026.105753</a>
  apa: Koers, T., Magyar, B., Bödger, C., &#38; Tröster, T. (2026). Analytical and
    experimental determination of the failure-critical pressure of pipe structures
    manufactured by PBF-LB/M. <i>International Journal of Pressure Vessels and Piping</i>,
    Article 105753. <a href="https://doi.org/10.1016/j.ijpvp.2026.105753">https://doi.org/10.1016/j.ijpvp.2026.105753</a>
  bibtex: '@article{Koers_Magyar_Bödger_Tröster_2026, title={Analytical and experimental
    determination of the failure-critical pressure of pipe structures manufactured
    by PBF-LB/M}, DOI={<a href="https://doi.org/10.1016/j.ijpvp.2026.105753">10.1016/j.ijpvp.2026.105753</a>},
    number={105753}, journal={International Journal of Pressure Vessels and Piping},
    publisher={Elsevier BV}, author={Koers, Thorsten and Magyar, Balázs and Bödger,
    Christian and Tröster, Thomas}, year={2026} }'
  chicago: Koers, Thorsten, Balázs Magyar, Christian Bödger, and Thomas Tröster. “Analytical
    and Experimental Determination of the Failure-Critical Pressure of Pipe Structures
    Manufactured by PBF-LB/M.” <i>International Journal of Pressure Vessels and Piping</i>,
    2026. <a href="https://doi.org/10.1016/j.ijpvp.2026.105753">https://doi.org/10.1016/j.ijpvp.2026.105753</a>.
  ieee: 'T. Koers, B. Magyar, C. Bödger, and T. Tröster, “Analytical and experimental
    determination of the failure-critical pressure of pipe structures manufactured
    by PBF-LB/M,” <i>International Journal of Pressure Vessels and Piping</i>, Art.
    no. 105753, 2026, doi: <a href="https://doi.org/10.1016/j.ijpvp.2026.105753">10.1016/j.ijpvp.2026.105753</a>.'
  mla: Koers, Thorsten, et al. “Analytical and Experimental Determination of the Failure-Critical
    Pressure of Pipe Structures Manufactured by PBF-LB/M.” <i>International Journal
    of Pressure Vessels and Piping</i>, 105753, Elsevier BV, 2026, doi:<a href="https://doi.org/10.1016/j.ijpvp.2026.105753">10.1016/j.ijpvp.2026.105753</a>.
  short: T. Koers, B. Magyar, C. Bödger, T. Tröster, International Journal of Pressure
    Vessels and Piping (2026).
date_created: 2026-01-07T08:39:04Z
date_updated: 2026-01-14T11:56:01Z
department:
- _id: '146'
- _id: '9'
- _id: '624'
- _id: '149'
- _id: '321'
doi: 10.1016/j.ijpvp.2026.105753
keyword:
- PBF-LB/M
- Pipe structures
- Strength assessment
- Burst pressure test
- Geometrical deviations
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://doi.org/10.1016/j.ijpvp.2026.105753
oa: '1'
publication: International Journal of Pressure Vessels and Piping
publication_identifier:
  issn:
  - 0308-0161
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Analytical and experimental determination of the failure-critical pressure
  of pipe structures manufactured by PBF-LB/M
type: journal_article
user_id: '97759'
year: '2026'
...
---
_id: '59261'
author:
- first_name: Sebastian
  full_name: Magerkohl, Sebastian
  id: '28520'
  last_name: Magerkohl
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
citation:
  ama: 'Magerkohl S, Magyar B. The Role or Rule of the Development Methodology for
    Additive Manufacturing. In: Lachmayer R, Oel M, Kaierle S, eds. <i>Innovative
    Produktentwicklung durch additive Fertigung</i>. Springer Berlin Heidelberg; 2025.
    doi:<a href="https://doi.org/10.1007/978-3-662-69327-8">10.1007/978-3-662-69327-8</a>'
  apa: Magerkohl, S., &#38; Magyar, B. (2025). The Role or Rule of the Development
    Methodology for Additive Manufacturing. In R. Lachmayer, M. Oel, &#38; S. Kaierle
    (Eds.), <i>Innovative Produktentwicklung durch additive Fertigung</i>. Springer
    Berlin Heidelberg. <a href="https://doi.org/10.1007/978-3-662-69327-8">https://doi.org/10.1007/978-3-662-69327-8</a>
  bibtex: '@inbook{Magerkohl_Magyar_2025, place={Berlin, Heidelberg}, title={The Role
    or Rule of the Development Methodology for Additive Manufacturing}, DOI={<a href="https://doi.org/10.1007/978-3-662-69327-8">10.1007/978-3-662-69327-8</a>},
    booktitle={Innovative Produktentwicklung durch additive Fertigung}, publisher={Springer
    Berlin Heidelberg}, author={Magerkohl, Sebastian and Magyar, Balázs}, editor={Lachmayer,
    Roland and Oel, Marcus and Kaierle, Stefan}, year={2025} }'
  chicago: 'Magerkohl, Sebastian, and Balázs Magyar. “The Role or Rule of the Development
    Methodology for Additive Manufacturing.” In <i>Innovative Produktentwicklung durch
    additive Fertigung</i>, edited by Roland Lachmayer, Marcus Oel, and Stefan Kaierle.
    Berlin, Heidelberg: Springer Berlin Heidelberg, 2025. <a href="https://doi.org/10.1007/978-3-662-69327-8">https://doi.org/10.1007/978-3-662-69327-8</a>.'
  ieee: 'S. Magerkohl and B. Magyar, “The Role or Rule of the Development Methodology
    for Additive Manufacturing,” in <i>Innovative Produktentwicklung durch additive
    Fertigung</i>, R. Lachmayer, M. Oel, and S. Kaierle, Eds. Berlin, Heidelberg:
    Springer Berlin Heidelberg, 2025.'
  mla: Magerkohl, Sebastian, and Balázs Magyar. “The Role or Rule of the Development
    Methodology for Additive Manufacturing.” <i>Innovative Produktentwicklung durch
    additive Fertigung</i>, edited by Roland Lachmayer et al., Springer Berlin Heidelberg,
    2025, doi:<a href="https://doi.org/10.1007/978-3-662-69327-8">10.1007/978-3-662-69327-8</a>.
  short: 'S. Magerkohl, B. Magyar, in: R. Lachmayer, M. Oel, S. Kaierle (Eds.), Innovative
    Produktentwicklung durch additive Fertigung, Springer Berlin Heidelberg, Berlin,
    Heidelberg, 2025.'
date_created: 2025-04-02T13:53:19Z
date_updated: 2026-01-14T11:58:39Z
department:
- _id: '146'
doi: 10.1007/978-3-662-69327-8
editor:
- first_name: Roland
  full_name: Lachmayer, Roland
  last_name: Lachmayer
- first_name: Marcus
  full_name: Oel, Marcus
  last_name: Oel
- first_name: Stefan
  full_name: Kaierle, Stefan
  last_name: Kaierle
language:
- iso: ger
place: Berlin, Heidelberg
publication: Innovative Produktentwicklung durch additive Fertigung
publication_identifier:
  isbn:
  - '9783662693261'
  - '9783662693278'
publication_status: published
publisher: Springer Berlin Heidelberg
quality_controlled: '1'
status: public
title: The Role or Rule of the Development Methodology for Additive Manufacturing
type: book_chapter
user_id: '97759'
year: '2025'
...
---
_id: '60080'
author:
- first_name: Dennis
  full_name: Hambach, Dennis
  id: '32850'
  last_name: Hambach
- first_name: Julia
  full_name: Settnieri, Julia
  last_name: Settnieri
citation:
  ama: 'Hambach D, Settnieri J. Fairness. In: Vogt K, Rossa H, eds. <i>Leistungsmessung,
    Evaluation und Feedback im Fremdsprachenunterricht - Ein Handbuch für Studium,
    Refendariat und Unterricht</i>. Klett Kallmeyer; 2025:49-54.'
  apa: Hambach, D., &#38; Settnieri, J. (2025). Fairness. In K. Vogt &#38; H. Rossa
    (Eds.), <i>Leistungsmessung, Evaluation und Feedback im Fremdsprachenunterricht
    - Ein Handbuch für Studium, Refendariat und Unterricht</i> (pp. 49–54). Klett
    Kallmeyer.
  bibtex: '@inbook{Hambach_Settnieri_2025, title={Fairness}, booktitle={Leistungsmessung,
    Evaluation und Feedback im Fremdsprachenunterricht - Ein Handbuch für Studium,
    Refendariat und Unterricht}, publisher={Klett Kallmeyer}, author={Hambach, Dennis
    and Settnieri, Julia}, editor={Vogt, Karin and Rossa, Henning}, year={2025}, pages={49–54}
    }'
  chicago: Hambach, Dennis, and Julia Settnieri. “Fairness.” In <i>Leistungsmessung,
    Evaluation und Feedback im Fremdsprachenunterricht - Ein Handbuch für Studium,
    Refendariat und Unterricht</i>, edited by Karin Vogt and Henning Rossa, 49–54.
    Klett Kallmeyer, 2025.
  ieee: D. Hambach and J. Settnieri, “Fairness,” in <i>Leistungsmessung, Evaluation
    und Feedback im Fremdsprachenunterricht - Ein Handbuch für Studium, Refendariat
    und Unterricht</i>, K. Vogt and H. Rossa, Eds. Klett Kallmeyer, 2025, pp. 49–54.
  mla: Hambach, Dennis, and Julia Settnieri. “Fairness.” <i>Leistungsmessung, Evaluation
    und Feedback im Fremdsprachenunterricht - Ein Handbuch für Studium, Refendariat
    und Unterricht</i>, edited by Karin Vogt and Henning Rossa, Klett Kallmeyer, 2025,
    pp. 49–54.
  short: 'D. Hambach, J. Settnieri, in: K. Vogt, H. Rossa (Eds.), Leistungsmessung,
    Evaluation und Feedback im Fremdsprachenunterricht - Ein Handbuch für Studium,
    Refendariat und Unterricht, Klett Kallmeyer, 2025, pp. 49–54.'
date_created: 2025-06-01T07:32:27Z
date_updated: 2025-10-29T09:52:07Z
department:
- _id: '146'
- _id: '398'
- _id: '399'
editor:
- first_name: Karin
  full_name: Vogt, Karin
  last_name: Vogt
- first_name: Henning
  full_name: Rossa, Henning
  last_name: Rossa
language:
- iso: ger
page: 49-54
publication: Leistungsmessung, Evaluation und Feedback im Fremdsprachenunterricht
  - Ein Handbuch für Studium, Refendariat und Unterricht
publication_identifier:
  isbn:
  - '9783772717765'
publication_status: published
publisher: Klett Kallmeyer
quality_controlled: '1'
status: public
title: Fairness
type: book_chapter
user_id: '32850'
year: '2025'
...
---
_id: '63209'
abstract:
- lang: ger
  text: 'Die DFG-Projekte AddFeRo-PM (406108415) und AddFeRo-SR (465089065) untersuchten
    die Potenziale des LB-PBF/M-Verfahrens zur Herstellung von Rotoren für unterschiedliche
    elektrische Maschinen. Im interdisziplinären Ansatz wurden Materialentwicklung
    und mechanische sowie elektromagnetische Optimierung verbunden. Im Projekt „AddFeRo-PM“
    wurde der Rotor einer permanentmagneterregten Synchron- maschine (PMSM) untersucht.
    FeSi erwies sich als geeignete Legierung, konnte aber wegen Spannungsrissen nur
    bis zu 3 % Siliziumanteil (kurz: FeSi3) verarbeitet werden. Mechanische und elektromagnetische
    Untersuchungen ermöglichten eine 3D-Optimierung der Rotorgeometrie und -struktur.
    Der Demonstrator wurde additiv gefertigt und zeigt Leicht-baupotenziale sowie
    reduzierte Drehmomentwelligkeit. Im Folgeprojekt „AddFeRo-SR“ kam eine Hochtemperatur-Bauraumheizung
    (HTBH) zum Einsatz, die FeSi mit 6,5 % Siliziumanteil verarbeitbar machte, welches
    bessere elektro- magnetische Eigenschaften bietet. Sie wurde bei einer Synchron-Reluktanzmaschine
    (SynRM) getestet. Eine hybride Rotorfertigung erwies sich jedoch aufgrund von
    HTBH-Einschränkungen als ungeeignet, weshalb eine einteilige Fertigung mit FeSi3
    umgesetzt wurde. Experimente bestätigten vergleichbare Betriebsergebnisse zur
    konventionellen Fertigung bei reduzierter Rotormasse. Zusätzlich wurde eine Methodik
    entwickelt, um additive Verfahren als Ergänzung zur konventionellen Fertigung
    zu integrieren. Beide Projekte zeigen das Potenzial additiver Fertigung für Leichtbau
    und Wirkungsgradsteigerung im Elektromaschinenbau und bieten wertvolle Grundlagen
    für industrielle Anwendungen.'
author:
- first_name: Michael
  full_name: Haase, Michael
  id: '35970'
  last_name: Haase
- first_name: Marius
  full_name: Behrendt, Marius
  last_name: Behrendt
- first_name: Florian
  full_name: Hengsbach, Florian
  id: '14073'
  last_name: Hengsbach
- first_name: Vinay
  full_name: Kunnathully Sathees Kumar, Vinay
  id: '60979'
  last_name: Kunnathully Sathees Kumar
- first_name: Sebastian
  full_name: Magerkohl, Sebastian
  id: '28520'
  last_name: Magerkohl
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
- first_name: Bernd
  full_name: Ponick, Bernd
  last_name: Ponick
- first_name: Mirko
  full_name: Schaper, Mirko
  id: '43720'
  last_name: Schaper
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
citation:
  ama: 'Haase M, Behrendt M, Hengsbach F, et al. <i>Additive Fertigung im Elektromaschinenbau:
    Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter
    Synchronmaschinen</i>. Technische Informationsbibliothek; 2025. doi:<a href="https://doi.org/10.34657/26753">10.34657/26753</a>'
  apa: 'Haase, M., Behrendt, M., Hengsbach, F., Kunnathully Sathees Kumar, V., Magerkohl,
    S., Magyar, B., Ponick, B., Schaper, M., &#38; Zimmer, D. (2025). <i>Additive
    Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung
    in Rotoren permanentmagneterregter Synchronmaschinen</i>. Technische Informationsbibliothek.
    <a href="https://doi.org/10.34657/26753">https://doi.org/10.34657/26753</a>'
  bibtex: '@book{Haase_Behrendt_Hengsbach_Kunnathully Sathees Kumar_Magerkohl_Magyar_Ponick_Schaper_Zimmer_2025,
    place={Hannover}, title={Additive Fertigung im Elektromaschinenbau: Erforschung
    von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen},
    DOI={<a href="https://doi.org/10.34657/26753">10.34657/26753</a>}, publisher={Technische
    Informationsbibliothek}, author={Haase, Michael and Behrendt, Marius and Hengsbach,
    Florian and Kunnathully Sathees Kumar, Vinay and Magerkohl, Sebastian and Magyar,
    Balázs and Ponick, Bernd and Schaper, Mirko and Zimmer, Detmar}, year={2025} }'
  chicago: 'Haase, Michael, Marius Behrendt, Florian Hengsbach, Vinay Kunnathully
    Sathees Kumar, Sebastian Magerkohl, Balázs Magyar, Bernd Ponick, Mirko Schaper,
    and Detmar Zimmer. <i>Additive Fertigung im Elektromaschinenbau: Erforschung von
    Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen</i>.
    Hannover: Technische Informationsbibliothek, 2025. <a href="https://doi.org/10.34657/26753">https://doi.org/10.34657/26753</a>.'
  ieee: 'M. Haase <i>et al.</i>, <i>Additive Fertigung im Elektromaschinenbau: Erforschung
    von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen</i>.
    Hannover: Technische Informationsbibliothek, 2025.'
  mla: 'Haase, Michael, et al. <i>Additive Fertigung im Elektromaschinenbau: Erforschung
    von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen</i>.
    Technische Informationsbibliothek, 2025, doi:<a href="https://doi.org/10.34657/26753">10.34657/26753</a>.'
  short: 'M. Haase, M. Behrendt, F. Hengsbach, V. Kunnathully Sathees Kumar, S. Magerkohl,
    B. Magyar, B. Ponick, M. Schaper, D. Zimmer, Additive Fertigung im Elektromaschinenbau:
    Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter
    Synchronmaschinen, Technische Informationsbibliothek, Hannover, 2025.'
date_created: 2025-12-18T12:14:12Z
date_updated: 2026-01-06T08:09:33Z
department:
- _id: '146'
- _id: '158'
doi: 10.34657/26753
has_accepted_license: '1'
keyword:
- Additive Fertigung
- Elektromotor
- Leichtbau
- Synchronmotor
- DFG
language:
- iso: ger
main_file_link:
- open_access: '1'
  url: https://oa.tib.eu/renate/bitstreams/9121e5bb-d113-4cfe-8fc6-610465afcd66/download
oa: '1'
place: Hannover
publication_status: published
publisher: Technische Informationsbibliothek
status: public
title: 'Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der
  additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen'
type: report
user_id: '97759'
year: '2025'
...
---
_id: '58503'
author:
- first_name: Dennis
  full_name: Hambach, Dennis
  id: '32850'
  last_name: Hambach
citation:
  ama: 'Hambach D. Technologieakzeptanz beim Einsatz von Handhelds zur Unterstützung
    des Hörverstehens. Eine Datendiskussion. In: ; 2024.'
  apa: Hambach, D. (2024). <i>Technologieakzeptanz beim Einsatz von Handhelds zur
    Unterstützung des Hörverstehens. Eine Datendiskussion</i>. 16. DGFF Nachwuchstagung
    - Brücken bauen - Perspektiven und Potenziale in der Fremdsprachenforschung, Paderborn.
  bibtex: '@inproceedings{Hambach_2024, title={Technologieakzeptanz beim Einsatz von
    Handhelds zur Unterstützung des Hörverstehens. Eine Datendiskussion}, author={Hambach,
    Dennis}, year={2024} }'
  chicago: Hambach, Dennis. “Technologieakzeptanz Beim Einsatz von Handhelds Zur Unterstützung
    Des Hörverstehens. Eine Datendiskussion,” 2024.
  ieee: D. Hambach, “Technologieakzeptanz beim Einsatz von Handhelds zur Unterstützung
    des Hörverstehens. Eine Datendiskussion,” presented at the 16. DGFF Nachwuchstagung
    - Brücken bauen - Perspektiven und Potenziale in der Fremdsprachenforschung, Paderborn,
    2024.
  mla: Hambach, Dennis. <i>Technologieakzeptanz Beim Einsatz von Handhelds Zur Unterstützung
    Des Hörverstehens. Eine Datendiskussion</i>. 2024.
  short: 'D. Hambach, in: 2024.'
conference:
  end_date: 2024-09-17
  location: Paderborn
  name: 16. DGFF Nachwuchstagung - Brücken bauen - Perspektiven und Potenziale in
    der Fremdsprachenforschung
  start_date: 2024-09-16
date_created: 2025-02-04T10:26:25Z
date_updated: 2025-02-04T10:35:12Z
ddc:
- '430'
department:
- _id: '146'
- _id: '398'
has_accepted_license: '1'
language:
- iso: eng
status: public
title: Technologieakzeptanz beim Einsatz von Handhelds zur Unterstützung des Hörverstehens.
  Eine Datendiskussion
type: conference_abstract
user_id: '32850'
year: '2024'
...
---
_id: '58685'
abstract:
- lang: ger
  text: "In quantitativen Fragebogenstudien arbeiten Forschende mit großen Datensätzen,
    bei deren Erhebung sie häufig auf Online-Fragebögen anstelle der klassischen Paper-Pencil-Fragebögen
    setzen. Forschende bevorzugen diese Art der Datenerhebung, da die Daten direkt
    nach der Eingabe digitalisiert sind; zu\r\nbedenken ist aber auch, dass Online-Fragebögen
    komplexer sind und mehr Vorbereitung benö'gen als Paper-Pencil-Fragebögen.\r\n\r\nIn
    diesem Workshop werden die Tools LimeSurvey und SoSci Survey vorgestellt, wobei
    der Fokus zum einen auf „klassischen“ Umfragen (LimeSurvey) und zum anderen auf
    Experimenten wie Akzeptabilitätsurteilen (SoSci Survey) liegen wird. Außerdem
    werden wir Vor- und Nachteile, Darstellungs- und Designanforderungen sowie Dos
    und Don’ts bei der Erstellung von Online-Fragebögen behandeln. Wenn Sie bereits
    einen eigenen Fragebogen erstellt haben und diesen gerne in LimeSurvey oder SoSci
    Survey erstellen möchten, bringen Sie ihn gerne zum Workshop mit.\r\n\r\nZur Vorbereitung
    auf den Workshop sollten Sie einen Account bei LimeSurvey (https://www.limesurvey.org/de)
    und/oder SoSci Survey (https://www.soscisurvey.de/) erstellen.\r\nSollte Ihre
    Universität über eine eigene LimeSurvey- oder SoSci Survey-Lizenz verfügen, können
    Sie auch dort einen Account anlegen. Empfehlenswert ist ferner, sich im Vorfeld
    das DGFF-Kolleg-Webinar von Henning Rossa zum Thema Fragebogen (https://www.dgff.de/fragebogen-henning-rossa/)
    anzuschauen."
author:
- first_name: Dennis
  full_name: Hambach, Dennis
  id: '32850'
  last_name: Hambach
- first_name: Andre
  full_name: Gövert, Andre
  id: '32937'
  last_name: Gövert
citation:
  ama: 'Hambach D, Gövert A. Hands‐on‐Workshop: Online‐Fragebogen. In: ; 2024.'
  apa: 'Hambach, D., &#38; Gövert, A. (2024). <i>Hands‐on‐Workshop: Online‐Fragebogen</i>.
    DGFF-Kolleg, Paderborn / Bielefeld.'
  bibtex: '@inproceedings{Hambach_Gövert_2024, title={Hands‐on‐Workshop: Online‐Fragebogen},
    author={Hambach, Dennis and Gövert, Andre}, year={2024} }'
  chicago: 'Hambach, Dennis, and Andre Gövert. “Hands‐on‐Workshop: Online‐Fragebogen,”
    2024.'
  ieee: 'D. Hambach and A. Gövert, “Hands‐on‐Workshop: Online‐Fragebogen,” presented
    at the DGFF-Kolleg, Paderborn / Bielefeld, 2024.'
  mla: 'Hambach, Dennis, and Andre Gövert. <i>Hands‐on‐Workshop: Online‐Fragebogen</i>.
    2024.'
  short: 'D. Hambach, A. Gövert, in: 2024.'
conference:
  end_date: 2024-07-04
  location: Paderborn / Bielefeld
  name: DGFF-Kolleg
  start_date: 2024-07-04
date_created: 2025-02-18T09:50:22Z
date_updated: 2025-02-18T09:53:02Z
department:
- _id: '146'
- _id: '398'
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.dgff.de/online-fragebogen-andre-goevert-und-dennis-hambach/
oa: '1'
related_material:
  link:
  - description: Workshopvorbereitendes Video und Materialien zum Workshop
    relation: supplementary_material
    url: https://www.dgff.de/online-fragebogen-andre-goevert-und-dennis-hambach/
status: public
title: 'Hands‐on‐Workshop: Online‐Fragebogen'
type: conference
user_id: '32850'
year: '2024'
...
---
_id: '52254'
author:
- first_name: Tobias
  full_name: Bührmann, Tobias
  id: '51794'
  last_name: Bührmann
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
citation:
  ama: Bührmann T, Magyar B. Approximate simulation of the hysteresis friction of
    radial shaft seals. <i>Tribologie und Schmierungstechnik</i>. 2024;70. Jahrgang(6/23):34-42.
    doi:<a href="https://doi.org/10.24053/TuS-2023-0038">10.24053/TuS-2023-0038</a>
  apa: Bührmann, T., &#38; Magyar, B. (2024). Approximate simulation of the hysteresis
    friction of radial shaft seals. <i>Tribologie Und Schmierungstechnik</i>, <i>70.
    Jahrgang</i>(6/23), 34–42. <a href="https://doi.org/10.24053/TuS-2023-0038">https://doi.org/10.24053/TuS-2023-0038</a>
  bibtex: '@article{Bührmann_Magyar_2024, title={Approximate simulation of the hysteresis
    friction of radial shaft seals}, volume={70. Jahrgang}, DOI={<a href="https://doi.org/10.24053/TuS-2023-0038">10.24053/TuS-2023-0038</a>},
    number={6/23}, journal={Tribologie und Schmierungstechnik}, author={Bührmann,
    Tobias and Magyar, Balázs}, year={2024}, pages={34–42} }'
  chicago: 'Bührmann, Tobias, and Balázs Magyar. “Approximate Simulation of the Hysteresis
    Friction of Radial Shaft Seals.” <i>Tribologie Und Schmierungstechnik</i> 70.
    Jahrgang, no. 6/23 (2024): 34–42. <a href="https://doi.org/10.24053/TuS-2023-0038">https://doi.org/10.24053/TuS-2023-0038</a>.'
  ieee: 'T. Bührmann and B. Magyar, “Approximate simulation of the hysteresis friction
    of radial shaft seals,” <i>Tribologie und Schmierungstechnik</i>, vol. 70. Jahrgang,
    no. 6/23, pp. 34–42, 2024, doi: <a href="https://doi.org/10.24053/TuS-2023-0038">10.24053/TuS-2023-0038</a>.'
  mla: Bührmann, Tobias, and Balázs Magyar. “Approximate Simulation of the Hysteresis
    Friction of Radial Shaft Seals.” <i>Tribologie Und Schmierungstechnik</i>, vol.
    70. Jahrgang, no. 6/23, 2024, pp. 34–42, doi:<a href="https://doi.org/10.24053/TuS-2023-0038">10.24053/TuS-2023-0038</a>.
  short: T. Bührmann, B. Magyar, Tribologie Und Schmierungstechnik 70. Jahrgang (2024)
    34–42.
date_created: 2024-03-04T15:04:31Z
date_updated: 2025-03-11T07:37:25Z
department:
- _id: '146'
- _id: '9'
doi: 10.24053/TuS-2023-0038
issue: 6/23
language:
- iso: eng
page: 34-42
publication: Tribologie und Schmierungstechnik
publication_identifier:
  isbn:
  - 978-3-381-10091-0
publication_status: published
quality_controlled: '1'
status: public
title: Approximate simulation of the hysteresis friction of radial shaft seals
type: journal_article
user_id: '51794'
volume: 70. Jahrgang
year: '2024'
...
---
_id: '58499'
abstract:
- lang: eng
  text: "<cf:p>Spring-applied brakes are widely used components in industrial drive
    systems. They provide a braking torque by friction between a mostly organic friction
    lining and a metallic counter surface. Increasing with decreasing size, they currently
    achieve speeds of up to 6,000 rpm, which corresponds to a sliding speed in frictional
    contact of up to 35 m/s. At the same time, there is a trend towards high-speed
    drives, with speeds of 10,000 rpm and above. So far, little is known about the
    behaviour of the friction value and torque of conventional spring-applied brakes
    with low-cost organic friction linings under these operating conditions. For this
    reason, a test rig was develop - ed that allows testing at sliding speeds of up
    to 120 m/s with different load inertias. The tests carried out at KAt so far showed
    that with limited friction work, the conventional spring-applied brake reaches
    the nominal braking torque at higher sliding speeds. \r\nIn addition to thermal
    overload of the friction lining, plastic deformation of the friction bodies can
    also permanently disrupt the operating behaviour of brakes operated at high sliding
    speeds. The plastic deformation of the friction discs manifests itself, for example,
    in a saucer-like shape of the discafs, leading to a reduction in the air gap and
    causing unwanted changes in the friction conditions. This paper describes the
    relationship between friction work and friction coefficient in organic linings
    and the physical mechanism of the deformation process of the friction discs. Based
    on these possible measures to reduce deformation are explained.\r\n</cf:p>"
author:
- first_name: Magnus
  full_name: Schadomsky, Magnus
  last_name: Schadomsky
- first_name: Johann
  full_name: Rauhaus, Johann
  last_name: Rauhaus
- first_name: Lars
  full_name: Blumenthal, Lars
  last_name: Blumenthal
- first_name: Detmar
  full_name: Zimmer, Detmar
  last_name: Zimmer
- first_name: Balázs
  full_name: Magyar, Balázs
  last_name: Magyar
citation:
  ama: Schadomsky M, Rauhaus J, Blumenthal L, Zimmer D, Magyar B. Investigation of
    the friction and deformation behaviour of high-speed brakes. <i>Tribologie und
    Schmierungstechnik</i>. 2024;71(1). doi:<a href="https://doi.org/10.24053/tus-2024-0004">10.24053/tus-2024-0004</a>
  apa: Schadomsky, M., Rauhaus, J., Blumenthal, L., Zimmer, D., &#38; Magyar, B. (2024).
    Investigation of the friction and deformation behaviour of high-speed brakes.
    <i>Tribologie und Schmierungstechnik</i>, <i>71</i>(1). <a href="https://doi.org/10.24053/tus-2024-0004">https://doi.org/10.24053/tus-2024-0004</a>
  bibtex: '@article{Schadomsky_Rauhaus_Blumenthal_Zimmer_Magyar_2024, title={Investigation
    of the friction and deformation behaviour of high-speed brakes}, volume={71},
    DOI={<a href="https://doi.org/10.24053/tus-2024-0004">10.24053/tus-2024-0004</a>},
    number={1}, journal={Tribologie und Schmierungstechnik}, publisher={Narr Francke
    Attempto Verlag GmbH + Co. KG}, author={Schadomsky, Magnus and Rauhaus, Johann
    and Blumenthal, Lars and Zimmer, Detmar and Magyar, Balázs}, year={2024} }'
  chicago: Schadomsky, Magnus, Johann Rauhaus, Lars Blumenthal, Detmar Zimmer, and
    Balázs Magyar. “Investigation of the friction and deformation behaviour of high-speed
    brakes.” <i>Tribologie und Schmierungstechnik</i> 71, no. 1 (2024). <a href="https://doi.org/10.24053/tus-2024-0004">https://doi.org/10.24053/tus-2024-0004</a>.
  ieee: 'M. Schadomsky, J. Rauhaus, L. Blumenthal, D. Zimmer, and B. Magyar, “Investigation
    of the friction and deformation behaviour of high-speed brakes,” <i>Tribologie
    und Schmierungstechnik</i>, vol. 71, no. 1, 2024, doi: <a href="https://doi.org/10.24053/tus-2024-0004">10.24053/tus-2024-0004</a>.'
  mla: Schadomsky, Magnus, et al. “Investigation of the friction and deformation behaviour
    of high-speed brakes.” <i>Tribologie und Schmierungstechnik</i>, vol. 71, no.
    1, Narr Francke Attempto Verlag GmbH + Co. KG, 2024, doi:<a href="https://doi.org/10.24053/tus-2024-0004">10.24053/tus-2024-0004</a>.
  short: M. Schadomsky, J. Rauhaus, L. Blumenthal, D. Zimmer, B. Magyar, Tribologie
    und Schmierungstechnik 71 (2024).
date_created: 2025-02-04T06:34:43Z
date_updated: 2025-03-11T08:06:23Z
department:
- _id: '146'
doi: 10.24053/tus-2024-0004
intvolume: '        71'
issue: '1'
language:
- iso: ger
publication: Tribologie und Schmierungstechnik
publication_identifier:
  issn:
  - 2941-0908
publication_status: published
publisher: Narr Francke Attempto Verlag GmbH + Co. KG
status: public
title: Investigation of the friction and deformation behaviour of high-speed brakes
type: journal_article
user_id: '63776'
volume: 71
year: '2024'
...
---
_id: '48095'
abstract:
- lang: eng
  text: Fused deposition modeling (FDM) is an additive manufacturing process that
    can be used to manufacture three-dimensional thermoplastic components layer by
    layer. One disadvantage of FDM is the shrinkage of the components during the manufacturing
    process. The filament is molten in the nozzle, deposited layer by layer, and cools
    down again. During solidification, the filament shrinks inhomogeneously in the
    x/y/z direction, which leads to distortion of the component geometries. Particularly
    with higher nominal lengths and complex local geometries, there is a need for
    optimization with regard to dimensional accuracy. The aim of this paper is to
    counteract this on the software side with global as well as local shrinkage factors.
    The expected shrinkage within a layer is predicted with an in-house developed
    software. The geometric accuracy of the model is verified by experimental investigations
    on cylindrical test specimens. In these, the so-called clover effect occurs as
    a result of the shrinkage. The circular shape of the deposited layer is deformed
    by the distortion in the x–y plane comparable to a clover. Finally, the results
    are validated by analyzing a demonstrator in the form of a bracket.
author:
- first_name: Thorsten
  full_name: Koers, Thorsten
  id: '38077'
  last_name: Koers
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
citation:
  ama: 'Koers T, Magyar B. Compensation of the Shrinkage Behavior Occurring in Cylindrical
    Components in the FDM Process. In: Lamanna G, Opran C, eds. <i>Macromolecular
    Symposia</i>. Vol 411. Wiley; 2023. doi:<a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>'
  apa: Koers, T., &#38; Magyar, B. (2023). Compensation of the Shrinkage Behavior
    Occurring in Cylindrical Components in the FDM Process. In G. Lamanna &#38; C.
    Opran (Eds.), <i>Macromolecular Symposia</i> (Vol. 411, Issue 1). Wiley. <a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>
  bibtex: '@inproceedings{Koers_Magyar_2023, title={Compensation of the Shrinkage
    Behavior Occurring in Cylindrical Components in the FDM Process}, volume={411},
    DOI={<a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>},
    number={1}, booktitle={Macromolecular Symposia}, publisher={Wiley}, author={Koers,
    Thorsten and Magyar, Balázs}, editor={Lamanna, Giuseppe and Opran, Constantin},
    year={2023} }'
  chicago: Koers, Thorsten, and Balázs Magyar. “Compensation of the Shrinkage Behavior
    Occurring in Cylindrical Components in the FDM Process.” In <i>Macromolecular
    Symposia</i>, edited by Giuseppe Lamanna and Constantin Opran, Vol. 411. Wiley,
    2023. <a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>.
  ieee: 'T. Koers and B. Magyar, “Compensation of the Shrinkage Behavior Occurring
    in Cylindrical Components in the FDM Process,” in <i>Macromolecular Symposia</i>,
    Bucharest, Romania, 2023, vol. 411, no. 1, doi: <a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>.'
  mla: Koers, Thorsten, and Balázs Magyar. “Compensation of the Shrinkage Behavior
    Occurring in Cylindrical Components in the FDM Process.” <i>Macromolecular Symposia</i>,
    edited by Giuseppe Lamanna and Constantin Opran, vol. 411, no. 1, Wiley, 2023,
    doi:<a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>.
  short: 'T. Koers, B. Magyar, in: G. Lamanna, C. Opran (Eds.), Macromolecular Symposia,
    Wiley, 2023.'
conference:
  end_date: 2022-11-26
  location: Bucharest, Romania
  name: Conference on Design and Technologies for Polymeric and Composites Products
    ‐ POLCOM 2022
  start_date: 2022-11-23
date_created: 2023-10-16T12:48:42Z
date_updated: 2023-11-17T11:36:15Z
department:
- _id: '146'
- _id: '219'
- _id: '9'
doi: https://doi.org/10.1002/masy.202200185
editor:
- first_name: Giuseppe
  full_name: Lamanna, Giuseppe
  last_name: Lamanna
- first_name: Constantin
  full_name: Opran, Constantin
  last_name: Opran
intvolume: '       411'
issue: '1'
language:
- iso: eng
publication: Macromolecular Symposia
publisher: Wiley
quality_controlled: '1'
status: public
title: Compensation of the Shrinkage Behavior Occurring in Cylindrical Components
  in the FDM Process
type: conference
user_id: '38077'
volume: 411
year: '2023'
...
---
_id: '49774'
author:
- first_name: Maximilian
  full_name: Bieber, Maximilian
  last_name: Bieber
- first_name: Michael
  full_name: Haase, Michael
  id: '35970'
  last_name: Haase
- first_name: Frederik
  full_name: Tasche, Frederik
  last_name: Tasche
- first_name: Alexander
  full_name: Zibart, Alexander
  id: '11029'
  last_name: Zibart
- first_name: Bernd
  full_name: Ponick, Bernd
  last_name: Ponick
citation:
  ama: 'Bieber M, Haase M, Tasche F, Zibart A, Ponick B. Additively manufactured air-cooled
    lightweight rotor for an automotive electric motor. In: <i>2023 IEEE International
    Electric Machines &#38;amp; Drives Conference (IEMDC)</i>. IEEE; 2023. doi:<a
    href="https://doi.org/10.1109/iemdc55163.2023.10238918">10.1109/iemdc55163.2023.10238918</a>'
  apa: Bieber, M., Haase, M., Tasche, F., Zibart, A., &#38; Ponick, B. (2023). Additively
    manufactured air-cooled lightweight rotor for an automotive electric motor. <i>2023
    IEEE International Electric Machines &#38;amp; Drives Conference (IEMDC)</i>.
    <a href="https://doi.org/10.1109/iemdc55163.2023.10238918">https://doi.org/10.1109/iemdc55163.2023.10238918</a>
  bibtex: '@inproceedings{Bieber_Haase_Tasche_Zibart_Ponick_2023, title={Additively
    manufactured air-cooled lightweight rotor for an automotive electric motor}, DOI={<a
    href="https://doi.org/10.1109/iemdc55163.2023.10238918">10.1109/iemdc55163.2023.10238918</a>},
    booktitle={2023 IEEE International Electric Machines &#38;amp; Drives Conference
    (IEMDC)}, publisher={IEEE}, author={Bieber, Maximilian and Haase, Michael and
    Tasche, Frederik and Zibart, Alexander and Ponick, Bernd}, year={2023} }'
  chicago: Bieber, Maximilian, Michael Haase, Frederik Tasche, Alexander Zibart, and
    Bernd Ponick. “Additively Manufactured Air-Cooled Lightweight Rotor for an Automotive
    Electric Motor.” In <i>2023 IEEE International Electric Machines &#38;amp; Drives
    Conference (IEMDC)</i>. IEEE, 2023. <a href="https://doi.org/10.1109/iemdc55163.2023.10238918">https://doi.org/10.1109/iemdc55163.2023.10238918</a>.
  ieee: 'M. Bieber, M. Haase, F. Tasche, A. Zibart, and B. Ponick, “Additively manufactured
    air-cooled lightweight rotor for an automotive electric motor,” 2023, doi: <a
    href="https://doi.org/10.1109/iemdc55163.2023.10238918">10.1109/iemdc55163.2023.10238918</a>.'
  mla: Bieber, Maximilian, et al. “Additively Manufactured Air-Cooled Lightweight
    Rotor for an Automotive Electric Motor.” <i>2023 IEEE International Electric Machines
    &#38;amp; Drives Conference (IEMDC)</i>, IEEE, 2023, doi:<a href="https://doi.org/10.1109/iemdc55163.2023.10238918">10.1109/iemdc55163.2023.10238918</a>.
  short: 'M. Bieber, M. Haase, F. Tasche, A. Zibart, B. Ponick, in: 2023 IEEE International
    Electric Machines &#38;amp; Drives Conference (IEMDC), IEEE, 2023.'
date_created: 2023-12-18T10:22:38Z
date_updated: 2023-12-18T10:26:53Z
department:
- _id: '146'
- _id: '219'
- _id: '158'
doi: 10.1109/iemdc55163.2023.10238918
language:
- iso: eng
publication: 2023 IEEE International Electric Machines &amp; Drives Conference (IEMDC)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Additively manufactured air-cooled lightweight rotor for an automotive electric
  motor
type: conference
user_id: '35970'
year: '2023'
...
---
_id: '49781'
author:
- first_name: Sebastian
  full_name: Magerkohl, Sebastian
  id: '28520'
  last_name: Magerkohl
- first_name: Michael
  full_name: Haase, Michael
  id: '35970'
  last_name: Haase
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
citation:
  ama: 'Magerkohl S, Haase M, Magyar B. Future of electric motors: Additive manufacturing
    of components with innovative lightweight and cooling structures. In: ; 2023.'
  apa: 'Magerkohl, S., Haase, M., &#38; Magyar, B. (2023). <i>Future of electric motors:
    Additive manufacturing of components with innovative lightweight and cooling structures</i>.
    E-Motive 2023, Schweinfurt.'
  bibtex: '@inproceedings{Magerkohl_Haase_Magyar_2023, title={Future of electric motors:
    Additive manufacturing of components with innovative lightweight and cooling structures},
    author={Magerkohl, Sebastian and Haase, Michael and Magyar, Balázs}, year={2023}
    }'
  chicago: 'Magerkohl, Sebastian, Michael Haase, and Balázs Magyar. “Future of Electric
    Motors: Additive Manufacturing of Components with Innovative Lightweight and Cooling
    Structures,” 2023.'
  ieee: 'S. Magerkohl, M. Haase, and B. Magyar, “Future of electric motors: Additive
    manufacturing of components with innovative lightweight and cooling structures,”
    presented at the E-Motive 2023, Schweinfurt, 2023.'
  mla: 'Magerkohl, Sebastian, et al. <i>Future of Electric Motors: Additive Manufacturing
    of Components with Innovative Lightweight and Cooling Structures</i>. 2023.'
  short: 'S. Magerkohl, M. Haase, B. Magyar, in: 2023.'
conference:
  end_date: 2023-09-28
  location: Schweinfurt
  name: E-Motive 2023
  start_date: 2023-09-27
date_created: 2023-12-18T11:21:52Z
date_updated: 2023-12-18T11:24:58Z
department:
- _id: '146'
language:
- iso: eng
publication_status: published
status: public
title: 'Future of electric motors: Additive manufacturing of components with innovative
  lightweight and cooling structures'
type: conference
user_id: '28520'
year: '2023'
...
---
_id: '50076'
author:
- first_name: Tobias
  full_name: Bührmann, Tobias
  id: '51794'
  last_name: Bührmann
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
citation:
  ama: 'Bührmann T, Magyar B. Approximate simulation of the hysteresis friction of
    radial shaft seals. In: <i>64. Tribologie-Fachtagung 2023</i>. ; 2023.'
  apa: Bührmann, T., &#38; Magyar, B. (2023). Approximate simulation of the hysteresis
    friction of radial shaft seals. <i>64. Tribologie-Fachtagung 2023</i>. 64. Tribologie-Fachtagung
    2023, Göttingen.
  bibtex: '@inproceedings{Bührmann_Magyar_2023, title={Approximate simulation of the
    hysteresis friction of radial shaft seals}, booktitle={64. Tribologie-Fachtagung
    2023}, author={Bührmann, Tobias and Magyar, Balázs}, year={2023} }'
  chicago: Bührmann, Tobias, and Balázs Magyar. “Approximate Simulation of the Hysteresis
    Friction of Radial Shaft Seals.” In <i>64. Tribologie-Fachtagung 2023</i>, 2023.
  ieee: T. Bührmann and B. Magyar, “Approximate simulation of the hysteresis friction
    of radial shaft seals,” presented at the 64. Tribologie-Fachtagung 2023, Göttingen,
    2023.
  mla: Bührmann, Tobias, and Balázs Magyar. “Approximate Simulation of the Hysteresis
    Friction of Radial Shaft Seals.” <i>64. Tribologie-Fachtagung 2023</i>, 2023.
  short: 'T. Bührmann, B. Magyar, in: 64. Tribologie-Fachtagung 2023, 2023.'
conference:
  end_date: 2023-09-27
  location: Göttingen
  name: 64. Tribologie-Fachtagung 2023
  start_date: 2023-09-25
date_created: 2024-01-02T10:22:43Z
date_updated: 2024-01-22T10:00:41Z
department:
- _id: '146'
language:
- iso: eng
publication: 64. Tribologie-Fachtagung 2023
status: public
title: Approximate simulation of the hysteresis friction of radial shaft seals
type: conference
user_id: '51794'
year: '2023'
...
---
_id: '49555'
author:
- first_name: Johann
  full_name: Rauhaus, Johann
  id: '63776'
  last_name: Rauhaus
- first_name: Magnus
  full_name: Schadomsky, Magnus
  id: '11904'
  last_name: Schadomsky
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
citation:
  ama: 'Rauhaus J, Schadomsky M, Magyar B, Zimmer D. Untersuchung des Reibungs- und
    Deformationsverhaltens von schnelllaufenden Bremsen. In: Gesellschaft für Tribologie
    e.V, ed. <i>Tagungsband der 64. Tribologie-Fachtagung</i>. ; 2023.'
  apa: Rauhaus, J., Schadomsky, M., Magyar, B., &#38; Zimmer, D. (2023). Untersuchung
    des Reibungs- und Deformationsverhaltens von schnelllaufenden Bremsen. In Gesellschaft
    für Tribologie e.V (Ed.), <i>Tagungsband der 64. Tribologie-Fachtagung</i>.
  bibtex: '@inproceedings{Rauhaus_Schadomsky_Magyar_Zimmer_2023, title={Untersuchung
    des Reibungs- und Deformationsverhaltens von schnelllaufenden Bremsen}, booktitle={Tagungsband
    der 64. Tribologie-Fachtagung}, author={Rauhaus, Johann and Schadomsky, Magnus
    and Magyar, Balázs and Zimmer, Detmar}, editor={Gesellschaft für Tribologie e.V},
    year={2023} }'
  chicago: Rauhaus, Johann, Magnus Schadomsky, Balázs Magyar, and Detmar Zimmer. “Untersuchung
    des Reibungs- und Deformationsverhaltens von schnelllaufenden Bremsen.” In <i>Tagungsband
    der 64. Tribologie-Fachtagung</i>, edited by Gesellschaft für Tribologie e.V,
    2023.
  ieee: J. Rauhaus, M. Schadomsky, B. Magyar, and D. Zimmer, “Untersuchung des Reibungs-
    und Deformationsverhaltens von schnelllaufenden Bremsen,” in <i>Tagungsband der
    64. Tribologie-Fachtagung</i>, Göttingen, 2023.
  mla: Rauhaus, Johann, et al. “Untersuchung des Reibungs- und Deformationsverhaltens
    von schnelllaufenden Bremsen.” <i>Tagungsband der 64. Tribologie-Fachtagung</i>,
    edited by Gesellschaft für Tribologie e.V, 2023.
  short: 'J. Rauhaus, M. Schadomsky, B. Magyar, D. Zimmer, in: Gesellschaft für Tribologie
    e.V (Ed.), Tagungsband der 64. Tribologie-Fachtagung, 2023.'
conference:
  end_date: 2023-09-27
  location: Göttingen
  name: 64. Tribologie-Fachtagung 2023
  start_date: 2023-09-25
corporate_editor:
- Gesellschaft für Tribologie e.V
date_created: 2023-12-08T13:59:01Z
date_updated: 2024-03-11T19:14:33Z
department:
- _id: '146'
language:
- iso: ger
publication: Tagungsband der 64. Tribologie-Fachtagung
publication_identifier:
  isbn:
  - 978-3-9817451-8-4
publication_status: published
status: public
title: Untersuchung des Reibungs- und Deformationsverhaltens von schnelllaufenden
  Bremsen
type: conference
user_id: '63776'
year: '2023'
...
---
_id: '52656'
author:
- first_name: Stefan
  full_name: Thielen, Stefan
  last_name: Thielen
- first_name: Sergiy
  full_name: Antonyuk, Sergiy
  last_name: Antonyuk
- first_name: Jan C.
  full_name: Aurich, Jan C.
  last_name: Aurich
- first_name: Tilmann
  full_name: Beck, Tilmann
  last_name: Beck
- first_name: Hans
  full_name: Hasse, Hans
  last_name: Hasse
- first_name: Michael
  full_name: Kopnarski, Michael
  last_name: Kopnarski
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
- first_name: Bernd
  full_name: Sauer, Bernd
  last_name: Sauer
- first_name: Marek
  full_name: Smaga, Marek
  last_name: Smaga
citation:
  ama: 'Thielen S, Antonyuk S, Aurich JC, et al. Manufacturing-Morphology-Property
    Relationships for Rotating Shaft Sealing Systems. In: <i>Component Surfaces</i>.
    Springer International Publishing; 2023. doi:<a href="https://doi.org/10.1007/978-3-031-35575-2_14">10.1007/978-3-031-35575-2_14</a>'
  apa: Thielen, S., Antonyuk, S., Aurich, J. C., Beck, T., Hasse, H., Kopnarski, M.,
    Magyar, B., Sauer, B., &#38; Smaga, M. (2023). Manufacturing-Morphology-Property
    Relationships for Rotating Shaft Sealing Systems. In <i>Component Surfaces</i>.
    Springer International Publishing. <a href="https://doi.org/10.1007/978-3-031-35575-2_14">https://doi.org/10.1007/978-3-031-35575-2_14</a>
  bibtex: '@inbook{Thielen_Antonyuk_Aurich_Beck_Hasse_Kopnarski_Magyar_Sauer_Smaga_2023,
    place={Cham}, title={Manufacturing-Morphology-Property Relationships for Rotating
    Shaft Sealing Systems}, DOI={<a href="https://doi.org/10.1007/978-3-031-35575-2_14">10.1007/978-3-031-35575-2_14</a>},
    booktitle={Component Surfaces}, publisher={Springer International Publishing},
    author={Thielen, Stefan and Antonyuk, Sergiy and Aurich, Jan C. and Beck, Tilmann
    and Hasse, Hans and Kopnarski, Michael and Magyar, Balázs and Sauer, Bernd and
    Smaga, Marek}, year={2023} }'
  chicago: 'Thielen, Stefan, Sergiy Antonyuk, Jan C. Aurich, Tilmann Beck, Hans Hasse,
    Michael Kopnarski, Balázs Magyar, Bernd Sauer, and Marek Smaga. “Manufacturing-Morphology-Property
    Relationships for Rotating Shaft Sealing Systems.” In <i>Component Surfaces</i>.
    Cham: Springer International Publishing, 2023. <a href="https://doi.org/10.1007/978-3-031-35575-2_14">https://doi.org/10.1007/978-3-031-35575-2_14</a>.'
  ieee: 'S. Thielen <i>et al.</i>, “Manufacturing-Morphology-Property Relationships
    for Rotating Shaft Sealing Systems,” in <i>Component Surfaces</i>, Cham: Springer
    International Publishing, 2023.'
  mla: Thielen, Stefan, et al. “Manufacturing-Morphology-Property Relationships for
    Rotating Shaft Sealing Systems.” <i>Component Surfaces</i>, Springer International
    Publishing, 2023, doi:<a href="https://doi.org/10.1007/978-3-031-35575-2_14">10.1007/978-3-031-35575-2_14</a>.
  short: 'S. Thielen, S. Antonyuk, J.C. Aurich, T. Beck, H. Hasse, M. Kopnarski, B.
    Magyar, B. Sauer, M. Smaga, in: Component Surfaces, Springer International Publishing,
    Cham, 2023.'
date_created: 2024-03-20T08:36:16Z
date_updated: 2024-03-20T08:37:36Z
department:
- _id: '146'
- _id: '9'
doi: 10.1007/978-3-031-35575-2_14
language:
- iso: eng
place: Cham
publication: Component Surfaces
publication_identifier:
  isbn:
  - '9783031355745'
  - '9783031355752'
  issn:
  - 1860-5168
  - 2196-1735
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Manufacturing-Morphology-Property Relationships for Rotating Shaft Sealing
  Systems
type: book_chapter
user_id: '97759'
year: '2023'
...
---
_id: '52657'
abstract:
- lang: eng
  text: <jats:p>Lubricants play a central role in many technical applications, e.g.
    in bearings and gears as well as in machining processes. In such applications,
    lubricants are exposed to extreme conditions in the contact area. In lubrication
    gaps, the pressure can reach values up to 5 GPa. The thermophysical properties
    of lubricants, and in particular the viscosity, at such extreme conditions have
    an important influence on the friction and wear behavior of a tribosystem. Accordingly,
    reliable lubricant property models are a prerequisite for accurate tribological
    simulations, e.g. elastohydrodynamic lubrication (EHL) simulations. Presently,
    the vast majority of experimental thermophysical property data are only available
    up to 1 GPa. Thus, reliable and robust models with strong extrapolation capabilities
    to higher pressure are required. In this work, viscosity measurements of squalane
    in a temperature range be tween 20 °C and 100 °C and pressures up to 1 GPa were
    carried out. Based on that data, a physical model for the viscosity was developed.
    The model is built by combining a molecular-based equation of state with the so-called
    entropy scaling approach. Finally, we demonstrate how this fluid property model
    can be favorably integrated in an EHL simulation by an application programming
    interface (API). The novel hybrid modeling approach is promising for future applications.</jats:p>
author:
- first_name: Patrick
  full_name: Wingertszahn, Patrick
  last_name: Wingertszahn
- first_name: Sebastian
  full_name: Schmitt, Sebastian
  last_name: Schmitt
- first_name: Stefan
  full_name: Thielen, Stefan
  last_name: Thielen
- first_name: Manuel
  full_name: Oehler, Manuel
  last_name: Oehler
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
- first_name: Oliver
  full_name: Koch, Oliver
  last_name: Koch
- first_name: Hans
  full_name: Hasse, Hans
  last_name: Hasse
- first_name: Simon
  full_name: Stephan, Simon
  last_name: Stephan
citation:
  ama: Wingertszahn P, Schmitt S, Thielen S, et al. Measurement, Modelling, and Appli
    cation of Lubricant Properties at Extreme Pressures. <i>Tribologie und Schmierungstechnik</i>.
    2023;70(4-5):5-12. doi:<a href="https://doi.org/10.24053/tus-2023-0017">10.24053/tus-2023-0017</a>
  apa: Wingertszahn, P., Schmitt, S., Thielen, S., Oehler, M., Magyar, B., Koch, O.,
    Hasse, H., &#38; Stephan, S. (2023). Measurement, Modelling, and Appli cation
    of Lubricant Properties at Extreme Pressures. <i>Tribologie Und Schmierungstechnik</i>,
    <i>70</i>(4–5), 5–12. <a href="https://doi.org/10.24053/tus-2023-0017">https://doi.org/10.24053/tus-2023-0017</a>
  bibtex: '@article{Wingertszahn_Schmitt_Thielen_Oehler_Magyar_Koch_Hasse_Stephan_2023,
    title={Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme
    Pressures}, volume={70}, DOI={<a href="https://doi.org/10.24053/tus-2023-0017">10.24053/tus-2023-0017</a>},
    number={4–5}, journal={Tribologie und Schmierungstechnik}, publisher={Narr Francke
    Attempto Verlag GmbH + Co. KG}, author={Wingertszahn, Patrick and Schmitt, Sebastian
    and Thielen, Stefan and Oehler, Manuel and Magyar, Balázs and Koch, Oliver and
    Hasse, Hans and Stephan, Simon}, year={2023}, pages={5–12} }'
  chicago: 'Wingertszahn, Patrick, Sebastian Schmitt, Stefan Thielen, Manuel Oehler,
    Balázs Magyar, Oliver Koch, Hans Hasse, and Simon Stephan. “Measurement, Modelling,
    and Appli Cation of Lubricant Properties at Extreme Pressures.” <i>Tribologie
    Und Schmierungstechnik</i> 70, no. 4–5 (2023): 5–12. <a href="https://doi.org/10.24053/tus-2023-0017">https://doi.org/10.24053/tus-2023-0017</a>.'
  ieee: 'P. Wingertszahn <i>et al.</i>, “Measurement, Modelling, and Appli cation
    of Lubricant Properties at Extreme Pressures,” <i>Tribologie und Schmierungstechnik</i>,
    vol. 70, no. 4–5, pp. 5–12, 2023, doi: <a href="https://doi.org/10.24053/tus-2023-0017">10.24053/tus-2023-0017</a>.'
  mla: Wingertszahn, Patrick, et al. “Measurement, Modelling, and Appli Cation of
    Lubricant Properties at Extreme Pressures.” <i>Tribologie Und Schmierungstechnik</i>,
    vol. 70, no. 4–5, Narr Francke Attempto Verlag GmbH + Co. KG, 2023, pp. 5–12,
    doi:<a href="https://doi.org/10.24053/tus-2023-0017">10.24053/tus-2023-0017</a>.
  short: P. Wingertszahn, S. Schmitt, S. Thielen, M. Oehler, B. Magyar, O. Koch, H.
    Hasse, S. Stephan, Tribologie Und Schmierungstechnik 70 (2023) 5–12.
date_created: 2024-03-20T08:38:12Z
date_updated: 2024-03-20T08:39:44Z
department:
- _id: '146'
- _id: '9'
doi: 10.24053/tus-2023-0017
intvolume: '        70'
issue: 4-5
keyword:
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
page: 5-12
publication: Tribologie und Schmierungstechnik
publication_identifier:
  issn:
  - 0724-3472
publication_status: published
publisher: Narr Francke Attempto Verlag GmbH + Co. KG
quality_controlled: '1'
status: public
title: Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme
  Pressures
type: journal_article
user_id: '97759'
volume: 70
year: '2023'
...
---
_id: '44078'
article_number: '117991'
author:
- first_name: Anatolii
  full_name: Andreiev, Anatolii
  id: '50215'
  last_name: Andreiev
- first_name: Kay-Peter
  full_name: Hoyer, Kay-Peter
  id: '48411'
  last_name: Hoyer
- first_name: Florian
  full_name: Hengsbach, Florian
  last_name: Hengsbach
- first_name: Michael
  full_name: Haase, Michael
  id: '35970'
  last_name: Haase
- first_name: Lennart
  full_name: Tasche, Lennart
  id: '71508'
  last_name: Tasche
- first_name: Kristina
  full_name: Duschik, Kristina
  last_name: Duschik
- first_name: Mirko
  full_name: Schaper, Mirko
  id: '43720'
  last_name: Schaper
citation:
  ama: Andreiev A, Hoyer K-P, Hengsbach F, et al. Powder bed fusion of soft-magnetic
    iron-based alloys with high silicon content. <i>Journal of Materials Processing
    Technology</i>. 2023;317. doi:<a href="https://doi.org/10.1016/j.jmatprotec.2023.117991">10.1016/j.jmatprotec.2023.117991</a>
  apa: Andreiev, A., Hoyer, K.-P., Hengsbach, F., Haase, M., Tasche, L., Duschik,
    K., &#38; Schaper, M. (2023). Powder bed fusion of soft-magnetic iron-based alloys
    with high silicon content. <i>Journal of Materials Processing Technology</i>,
    <i>317</i>, Article 117991. <a href="https://doi.org/10.1016/j.jmatprotec.2023.117991">https://doi.org/10.1016/j.jmatprotec.2023.117991</a>
  bibtex: '@article{Andreiev_Hoyer_Hengsbach_Haase_Tasche_Duschik_Schaper_2023, title={Powder
    bed fusion of soft-magnetic iron-based alloys with high silicon content}, volume={317},
    DOI={<a href="https://doi.org/10.1016/j.jmatprotec.2023.117991">10.1016/j.jmatprotec.2023.117991</a>},
    number={117991}, journal={Journal of Materials Processing Technology}, publisher={Elsevier
    BV}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Hengsbach, Florian and
    Haase, Michael and Tasche, Lennart and Duschik, Kristina and Schaper, Mirko},
    year={2023} }'
  chicago: Andreiev, Anatolii, Kay-Peter Hoyer, Florian Hengsbach, Michael Haase,
    Lennart Tasche, Kristina Duschik, and Mirko Schaper. “Powder Bed Fusion of Soft-Magnetic
    Iron-Based Alloys with High Silicon Content.” <i>Journal of Materials Processing
    Technology</i> 317 (2023). <a href="https://doi.org/10.1016/j.jmatprotec.2023.117991">https://doi.org/10.1016/j.jmatprotec.2023.117991</a>.
  ieee: 'A. Andreiev <i>et al.</i>, “Powder bed fusion of soft-magnetic iron-based
    alloys with high silicon content,” <i>Journal of Materials Processing Technology</i>,
    vol. 317, Art. no. 117991, 2023, doi: <a href="https://doi.org/10.1016/j.jmatprotec.2023.117991">10.1016/j.jmatprotec.2023.117991</a>.'
  mla: Andreiev, Anatolii, et al. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys
    with High Silicon Content.” <i>Journal of Materials Processing Technology</i>,
    vol. 317, 117991, Elsevier BV, 2023, doi:<a href="https://doi.org/10.1016/j.jmatprotec.2023.117991">10.1016/j.jmatprotec.2023.117991</a>.
  short: A. Andreiev, K.-P. Hoyer, F. Hengsbach, M. Haase, L. Tasche, K. Duschik,
    M. Schaper, Journal of Materials Processing Technology 317 (2023).
date_created: 2023-04-20T10:39:14Z
date_updated: 2023-06-01T14:21:45Z
department:
- _id: '158'
- _id: '146'
- _id: '219'
doi: 10.1016/j.jmatprotec.2023.117991
intvolume: '       317'
keyword:
- Industrial and Manufacturing Engineering
- Metals and Alloys
- Computer Science Applications
- Modeling and Simulation
- Ceramics and Composites
language:
- iso: eng
publication: Journal of Materials Processing Technology
publication_identifier:
  issn:
  - 0924-0136
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Powder bed fusion of soft-magnetic iron-based alloys with high silicon content
type: journal_article
user_id: '43720'
volume: 317
year: '2023'
...
---
_id: '45360'
alternative_title:
- Implementation of optimized surface slitting for eddy current loss reduction on
  the surface of an additively manufactured pemanent magnet rotor
author:
- first_name: Michael
  full_name: Haase, Michael
  id: '35970'
  last_name: Haase
- first_name: Maximilian
  full_name: Bieber, Maximilian
  last_name: Bieber
- first_name: Frederik
  full_name: Tasche, Frederik
  last_name: Tasche
- first_name: Mirko
  full_name: Schaper, Mirko
  id: '43720'
  last_name: Schaper
- first_name: Kay-Peter
  full_name: Hoyer, Kay-Peter
  id: '48411'
  last_name: Hoyer
- first_name: Bernd
  full_name: Ponik, Bernd
  last_name: Ponik
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
citation:
  ama: 'Haase M, Bieber M, Tasche F, et al. Umsetzung einer optimierten Oberflächenschlitzung
    zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.
    In: Kynast M, Eichmann M, Witt G, eds. <i>Proceedings of the 19th Rapid.Tech 3D
    Conference Erfurt, Germany, 9–11 May 2023</i>. Carl Hanser Verlag GmbH &#38; Co.
    KG; 2023. doi:<a href="https://doi.org/10.3139/9783446479425.001 ">https://doi.org/10.3139/9783446479425.001
    </a>'
  apa: Haase, M., Bieber, M., Tasche, F., Schaper, M., Hoyer, K.-P., Ponik, B., &#38;
    Magyar, B. (2023). Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion
    auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors. In M. Kynast,
    M. Eichmann, &#38; G. Witt (Eds.), <i>Proceedings of the 19th Rapid.Tech 3D Conference
    Erfurt, Germany, 9–11 May 2023</i>. Carl Hanser Verlag GmbH &#38; Co. KG. <a href="https://doi.org/10.3139/9783446479425.001
    ">https://doi.org/10.3139/9783446479425.001 </a>
  bibtex: '@inbook{Haase_Bieber_Tasche_Schaper_Hoyer_Ponik_Magyar_2023, place={München},
    title={Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion
    auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors}, DOI={<a
    href="https://doi.org/10.3139/9783446479425.001 ">https://doi.org/10.3139/9783446479425.001
    </a>}, booktitle={Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany,
    9–11 May 2023}, publisher={Carl Hanser Verlag GmbH &#38; Co. KG}, author={Haase,
    Michael and Bieber, Maximilian and Tasche, Frederik and Schaper, Mirko and Hoyer,
    Kay-Peter and Ponik, Bernd and Magyar, Balázs}, editor={Kynast, Michael and Eichmann,
    Michael and Witt, Gerd}, year={2023} }'
  chicago: 'Haase, Michael, Maximilian Bieber, Frederik Tasche, Mirko Schaper, Kay-Peter
    Hoyer, Bernd Ponik, and Balázs Magyar. “Umsetzung einer optimierten Oberflächenschlitzung
    zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.”
    In <i>Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May
    2023</i>, edited by Michael Kynast, Michael Eichmann, and Gerd Witt. München:
    Carl Hanser Verlag GmbH &#38; Co. KG, 2023. <a href="https://doi.org/10.3139/9783446479425.001
    ">https://doi.org/10.3139/9783446479425.001 </a>.'
  ieee: 'M. Haase <i>et al.</i>, “Umsetzung einer optimierten Oberflächenschlitzung
    zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,”
    in <i>Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May
    2023</i>, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag
    GmbH &#38; Co. KG, 2023.'
  mla: Haase, Michael, et al. “Umsetzung einer optimierten Oberflächenschlitzung zur
    Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.”
    <i>Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May
    2023</i>, edited by Michael Kynast et al., Carl Hanser Verlag GmbH &#38; Co. KG,
    2023, doi:<a href="https://doi.org/10.3139/9783446479425.001 ">https://doi.org/10.3139/9783446479425.001
    </a>.
  short: 'M. Haase, M. Bieber, F. Tasche, M. Schaper, K.-P. Hoyer, B. Ponik, B. Magyar,
    in: M. Kynast, M. Eichmann, G. Witt (Eds.), Proceedings of the 19th Rapid.Tech
    3D Conference Erfurt, Germany, 9–11 May 2023, Carl Hanser Verlag GmbH &#38; Co.
    KG, München, 2023.'
date_created: 2023-05-30T05:55:15Z
date_updated: 2025-08-29T09:19:53Z
department:
- _id: '146'
- _id: '219'
- _id: '158'
doi: 'https://doi.org/10.3139/9783446479425.001 '
editor:
- first_name: Michael
  full_name: Kynast, Michael
  last_name: Kynast
- first_name: Michael
  full_name: Eichmann, Michael
  last_name: Eichmann
- first_name: Gerd
  full_name: Witt, Gerd
  last_name: Witt
language:
- iso: ger
place: München
popular_science: '1'
publication: Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11
  May 2023
publication_identifier:
  eisbn:
  - 978-3-446-47942-5
  isbn:
  - 978-3-446-47941-8
publication_status: published
publisher: Carl Hanser Verlag GmbH & Co. KG
status: public
title: Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion
  auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors
type: book_chapter
user_id: '35970'
year: '2023'
...
---
_id: '47084'
abstract:
- lang: eng
  text: "Fused Deposition Modeling (FDM) is an additive manufacturing process to produce\r\ncomplex
    thermoplastic geometries layer by layer. The filament is melted in a nozzle, iteratively\r\ndeposited,
    and then cools down. Due to the solidification process, the deposited filament
    strands\r\ndeviate from their intended position due to shrinkage, resulting in
    significant geometric deviations\r\nin the final part. In terms of dimensional
    accuracy, there is a need for optimization, especially for\r\nlocal curved geometries
    in relation to the global part with higher nominal dimensions. The aim of\r\nthis
    study is to investigate the size and shape deviations for cylindrical FDM elements
    and to\r\ncompensate the expected deformations by using an in-house software with
    adaptive scaling factors\r\nin the x-y plane. Previous studies mainly focus on
    simple, non-curved objects, this study also\r\nconsiders the influence of curvature
    and global as well as local deviations on the final part."
author:
- first_name: Thorsten
  full_name: Koers, Thorsten
  id: '38077'
  last_name: Koers
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
citation:
  ama: 'Koers T, Magyar B. Determination and Compensation of the Shrinkage Behavior
    of Cylindrical Elements in the FDM Process. In: Beaman J, ed. <i>Proceedings of
    the 34th Annual International Solid Freeform Fabrication Symposium 2023</i>. Vol
    34. ; 2023. doi:<a href="https://doi.org/10.26153/tsw/50920">https://doi.org/10.26153/tsw/50920</a>'
  apa: Koers, T., &#38; Magyar, B. (2023). Determination and Compensation of the Shrinkage
    Behavior of Cylindrical Elements in the FDM Process. In J. Beaman (Ed.), <i>Proceedings
    of the 34th Annual International Solid Freeform Fabrication Symposium 2023</i>
    (Vol. 34). <a href="https://doi.org/10.26153/tsw/50920">https://doi.org/10.26153/tsw/50920</a>
  bibtex: '@inproceedings{Koers_Magyar_2023, title={Determination and Compensation
    of the Shrinkage Behavior of Cylindrical Elements in the FDM Process}, volume={34},
    DOI={<a href="https://doi.org/10.26153/tsw/50920">https://doi.org/10.26153/tsw/50920</a>},
    booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication
    Symposium 2023}, author={Koers, Thorsten and Magyar, Balázs}, editor={Beaman,
    Joseph}, year={2023} }'
  chicago: Koers, Thorsten, and Balázs Magyar. “Determination and Compensation of
    the Shrinkage Behavior of Cylindrical Elements in the FDM Process.” In <i>Proceedings
    of the 34th Annual International Solid Freeform Fabrication Symposium 2023</i>,
    edited by Joseph Beaman, Vol. 34, 2023. <a href="https://doi.org/10.26153/tsw/50920">https://doi.org/10.26153/tsw/50920</a>.
  ieee: 'T. Koers and B. Magyar, “Determination and Compensation of the Shrinkage
    Behavior of Cylindrical Elements in the FDM Process,” in <i>Proceedings of the
    34th Annual International Solid Freeform Fabrication Symposium 2023</i>, Austin,
    Texas, USA, 2023, vol. 34, doi: <a href="https://doi.org/10.26153/tsw/50920">https://doi.org/10.26153/tsw/50920</a>.'
  mla: Koers, Thorsten, and Balázs Magyar. “Determination and Compensation of the
    Shrinkage Behavior of Cylindrical Elements in the FDM Process.” <i>Proceedings
    of the 34th Annual International Solid Freeform Fabrication Symposium 2023</i>,
    edited by Joseph Beaman, vol. 34, 2023, doi:<a href="https://doi.org/10.26153/tsw/50920">https://doi.org/10.26153/tsw/50920</a>.
  short: 'T. Koers, B. Magyar, in: J. Beaman (Ed.), Proceedings of the 34th Annual
    International Solid Freeform Fabrication Symposium 2023, 2023.'
conference:
  end_date: 2023-08-16
  location: Austin, Texas, USA
  name: 34th Annual International Solid Freeform Fabrication Symposium (SFF Symp 2023)
  start_date: 2023-08-14
date_created: 2023-09-15T12:55:03Z
date_updated: 2026-03-19T08:28:08Z
department:
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '9'
doi: https://doi.org/10.26153/tsw/50920
editor:
- first_name: Joseph
  full_name: Beaman, Joseph
  last_name: Beaman
intvolume: '        34'
language:
- iso: eng
main_file_link:
- url: https://utw10945.utweb.utexas.edu/sites/default/files/2023/004%20DeterminationandCompensationoftheShrinkageBehaviorofCylindricalElementsintheFDMProcess.pdf
publication: Proceedings of the 34th Annual International Solid Freeform Fabrication
  Symposium 2023
quality_controlled: '1'
status: public
title: Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements
  in the FDM Process
type: conference
user_id: '38077'
volume: 34
year: '2023'
...
---
_id: '48790'
abstract:
- lang: eng
  text: To ensure uniform documentation of support structure information, a concept
    is presented that enables a standardized depiction of support structures in technical
    drawings based on ISO 128-3. To this end, requirements for a uniform depiction
    are defined and a procedure for drawing entry is presented. The drawing entry
    should contain all production-relevant support structure information. The standardized
    documentation of support structure information in technical drawings is intended
    to ensure a simple, clear and safe exchange of information between business units
    or different companies along the value chain. As a result a possible drawing entry
    of support structures was developed. To distinguish between different support
    structure types, a standardized depiction of geometrical information in a specification
    field is shown. The specification field gives a detailed description of the support
    structure type, the geometry as well as the connection to the part and the building
    platform. Also uncommon support types like lattice structures or CAD based support
    structures can be implemented. To ensure the usability the depictio is editable
    and extendable.
author:
- first_name: Stefan
  full_name: Lammers, Stefan
  id: '13835'
  last_name: Lammers
- first_name: Thorsten
  full_name: Koers, Thorsten
  id: '38077'
  last_name: Koers
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
- first_name: Tobias
  full_name: Lieneke, Tobias
  id: '13956'
  last_name: Lieneke
citation:
  ama: 'Lammers S, Koers T, Magyar B, Zimmer D, Lieneke T. Depiction of support structures
    in technical drawings. In: Beaman J, ed. <i>Proceedings of the 34th Annual International
    Solid Freeform Fabrication Symposium 2023</i>. Vol 34. ; 2023. doi:<a href="https://doi.org/10.26153/tsw/50982">https://doi.org/10.26153/tsw/50982</a>'
  apa: Lammers, S., Koers, T., Magyar, B., Zimmer, D., &#38; Lieneke, T. (2023). Depiction
    of support structures in technical drawings. In J. Beaman (Ed.), <i>Proceedings
    of the 34th Annual International Solid Freeform Fabrication Symposium 2023</i>
    (Vol. 34). <a href="https://doi.org/10.26153/tsw/50982">https://doi.org/10.26153/tsw/50982</a>
  bibtex: '@inproceedings{Lammers_Koers_Magyar_Zimmer_Lieneke_2023, title={Depiction
    of support structures in technical drawings}, volume={34}, DOI={<a href="https://doi.org/10.26153/tsw/50982">https://doi.org/10.26153/tsw/50982</a>},
    booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication
    Symposium 2023}, author={Lammers, Stefan and Koers, Thorsten and Magyar, Balázs
    and Zimmer, Detmar and Lieneke, Tobias}, editor={Beaman, Joseph}, year={2023}
    }'
  chicago: Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias
    Lieneke. “Depiction of Support Structures in Technical Drawings.” In <i>Proceedings
    of the 34th Annual International Solid Freeform Fabrication Symposium 2023</i>,
    edited by Joseph Beaman, Vol. 34, 2023. <a href="https://doi.org/10.26153/tsw/50982">https://doi.org/10.26153/tsw/50982</a>.
  ieee: 'S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of
    support structures in technical drawings,” in <i>Proceedings of the 34th Annual
    International Solid Freeform Fabrication Symposium 2023</i>, Austin, Texas, USA,
    2023, vol. 34, doi: <a href="https://doi.org/10.26153/tsw/50982">https://doi.org/10.26153/tsw/50982</a>.'
  mla: Lammers, Stefan, et al. “Depiction of Support Structures in Technical Drawings.”
    <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium
    2023</i>, edited by Joseph Beaman, vol. 34, 2023, doi:<a href="https://doi.org/10.26153/tsw/50982">https://doi.org/10.26153/tsw/50982</a>.
  short: 'S. Lammers, T. Koers, B. Magyar, D. Zimmer, T. Lieneke, in: J. Beaman (Ed.),
    Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium
    2023, 2023.'
conference:
  end_date: 2023-08-16
  location: Austin, Texas, USA
  name: 34th Annual International Solid Freeform Fabrication Symposium (SFF Symp 2023)
  start_date: 2023-08-14
date_created: 2023-11-13T09:17:35Z
date_updated: 2026-03-19T08:26:25Z
department:
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '9'
doi: https://doi.org/10.26153/tsw/50982
editor:
- first_name: Joseph
  full_name: Beaman, Joseph
  last_name: Beaman
intvolume: '        34'
language:
- iso: eng
main_file_link:
- url: https://utw10945.utweb.utexas.edu/sites/default/files/2023/053%20DepictionofSupportStructuresinTechnicalDrawings.pdf
publication: Proceedings of the 34th Annual International Solid Freeform Fabrication
  Symposium 2023
quality_controlled: '1'
status: public
title: Depiction of support structures in technical drawings
type: conference
user_id: '38077'
volume: 34
year: '2023'
...
---
_id: '30730'
abstract:
- lang: ger
  text: "Es ist eine Reibscheibe (18) für\r\neine Reibungskupplung (10) vorgesehen
    mit einem zwischen Druckplatten (14, 16, 38) verklemmbaren Rotorring\r\n(32),
    Reibbelägen zur Herstellung eines Reibschlusses des\r\nRotorrings (32) mit der
    jeweiligen Druckplatte, (14, 16, 38),\r\neinem axial feststehenden Wellenelement
    (20) zur Übertragung eines Drehmoments und mindestens einem mit dem\r\nRotorring
    (32) und mit dem Wellenelement (20) im Wesentlichen drehfest verbundenen und in
    axialer Richtung elastisch nachgiebigen Federelement (34) zur elastischen axialen
    Verlagerung des Rotorrings (32) relativ zum Wellenelement (20), wobei der Rotorring
    (32) zwischen einer Offenstellung, in welcher das Federelement (34) entspannt
    ist,\r\nund einer Schließstellung, in welcher das Federelement\r\n(34) von mindestens
    einer Druckplatte (14, 16, 38) verspannt ist, im Wesentlichen in axialer Richtung
    parallelverschiebbar ist. Durch den über den vergleichsweise geringen\r\nerforderlichen
    axialen Verlagerungsweg federnd an dem\r\naxial unbeweglichen Wellenelement (20)
    angebundenen\r\ndie Reibbeläge tragenden Rotorring (32) kann bei geringen\r\nHerstellungskosten
    unnötige Reibung vermieden werden,\r\nso dass eine verschleißarme und geräuscharme
    lösbare\r\nKoppelung von Bauteilen ermöglicht ist. "
application_date: 2020-09-30
application_number: 10 2020 125 522.5
author:
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
- first_name: Lars Martin
  full_name: Blumenthal, Lars Martin
  id: '27566'
  last_name: Blumenthal
- first_name: Magnus
  full_name: Schadomsky, Magnus
  id: '11904'
  last_name: Schadomsky
citation:
  ama: Zimmer D, Blumenthal LM, Schadomsky M. Reibscheibe für eine Reibungskupplung.
    Published online 2022.
  apa: Zimmer, D., Blumenthal, L. M., &#38; Schadomsky, M. (2022). <i>Reibscheibe
    für eine Reibungskupplung</i>.
  bibtex: '@article{Zimmer_Blumenthal_Schadomsky_2022, title={Reibscheibe für eine
    Reibungskupplung}, author={Zimmer, Detmar and Blumenthal, Lars Martin and Schadomsky,
    Magnus}, year={2022} }'
  chicago: Zimmer, Detmar, Lars Martin Blumenthal, and Magnus Schadomsky. “Reibscheibe
    Für Eine Reibungskupplung,” 2022.
  ieee: D. Zimmer, L. M. Blumenthal, and M. Schadomsky, “Reibscheibe für eine Reibungskupplung.”
    2022.
  mla: Zimmer, Detmar, et al. <i>Reibscheibe Für Eine Reibungskupplung</i>. 2022.
  short: D. Zimmer, L.M. Blumenthal, M. Schadomsky, (2022).
date_created: 2022-03-31T08:24:39Z
date_updated: 2022-03-31T09:08:58Z
department:
- _id: '146'
ipc: F16D 13/64
ipn: ' DE 10 2020 125 522 A1'
page: '14'
publication_date: 2022-03-30
status: public
title: Reibscheibe für eine Reibungskupplung
type: patent
user_id: '11904'
year: '2022'
...