--- _id: '23465' abstract: - lang: eng text: One of the main objectives of production engineering is to reproducibly manufacture (complex) defect-free parts. To achieve this, it is necessary to employ an appropriate process or tool design. While this will generally prove successful, it cannot, however, offset stochastic defects with local variations in material properties. Closed-loop process control represents a promising approach for a solution in this context. The state of the art involves using this approach to control geometric parameters such as a length. So far, no research or applications have been conducted with closed-loop control for microstructure and product properties. In the project on which this paper is based, the local martensite content of parts is to be adjusted in a highly precise and reproducible manner. The forming process employed is a special, property-controlled flow-forming process. A model-based controller is thus to generate corresponding correction values for the tool-path geometry and tool-path velocity on the basis of online martensite content measurements. For the controller model, it is planned to use a special process or microstructure (correlation) model. The planned paper not only describes the experimental setup but also presents results of initial experimental investigations for subsequent use in the closed-loop control of α’-martensite content during flow-forming. author: - first_name: Bahman full_name: Arian, Bahman id: '36287' last_name: Arian - first_name: Werner full_name: Homberg, Werner id: '233' last_name: Homberg - first_name: Markus full_name: Riepold, Markus last_name: Riepold - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Julian full_name: Rozo Vasquez, Julian last_name: Rozo Vasquez - first_name: Frank full_name: Walther, Frank last_name: Walther citation: ama: 'Arian B, Homberg W, Riepold M, Trächtler A, Rozo Vasquez J, Walther F. Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming. In: ULiège Library; 2021.' apa: Arian, B., Homberg, W., Riepold, M., Trächtler, A., Rozo Vasquez, J., & Walther, F. (2021). Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming. 24th International Conference on Material Forming - ESAFORM 2021, Liège, Belgium. bibtex: '@inproceedings{Arian_Homberg_Riepold_Trächtler_Rozo Vasquez_Walther_2021, place={Liège}, title={Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming}, publisher={ULiège Library}, author={Arian, Bahman and Homberg, Werner and Riepold, Markus and Trächtler, Ansgar and Rozo Vasquez, Julian and Walther, Frank}, year={2021} }' chicago: 'Arian, Bahman, Werner Homberg, Markus Riepold, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Forming of Metastable Austenitic Stainless Steel Tubes with Axially Graded Martensite Content by Flow-Forming.” Liège: ULiège Library, 2021.' ieee: B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, and F. Walther, “Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming,” presented at the 24th International Conference on Material Forming - ESAFORM 2021, Liège, Belgium, 2021. mla: Arian, Bahman, et al. Forming of Metastable Austenitic Stainless Steel Tubes with Axially Graded Martensite Content by Flow-Forming. ULiège Library, 2021. short: 'B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, F. Walther, in: ULiège Library, Liège, 2021.' conference: end_date: 2021-04-16 location: Liège, Belgium name: 24th International Conference on Material Forming - ESAFORM 2021 start_date: 2021-04-14 date_created: 2021-08-23T13:00:35Z date_updated: 2023-05-02T08:27:48Z department: - _id: '156' - _id: '153' - _id: '241' keyword: - Flow-forming - Spinning - Process Strategy - Martensite Content - Property Control - Micromagnetic Measurement - Metastable Austenitic Stainless Steel language: - iso: eng main_file_link: - open_access: '1' url: https://popups.uliege.be/esaform21/index.php?id=2759 oa: '1' place: Liège publication_identifier: eisbn: - 978-2-87019-303-7 isbn: - 978-2-87019-302-0 publication_status: published publisher: ULiège Library quality_controlled: '1' status: public title: Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming type: conference user_id: '36287' year: '2021' ... --- _id: '33975' author: - first_name: Cederic full_name: Lenz, Cederic last_name: Lenz - first_name: Christian full_name: Henke, Christian last_name: Henke - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Lenz C, Henke C, Trächtler A. Anomaly detection in hot forming processes using hybrid modeling. In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE; 2021. doi:10.1109/etfa45728.2021.9613629' apa: Lenz, C., Henke, C., & Trächtler, A. (2021). Anomaly detection in hot forming processes using hybrid modeling. 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden . https://doi.org/10.1109/etfa45728.2021.9613629 bibtex: '@inproceedings{Lenz_Henke_Trächtler_2021, title={Anomaly detection in hot forming processes using hybrid modeling}, DOI={10.1109/etfa45728.2021.9613629}, booktitle={2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)}, publisher={IEEE}, author={Lenz, Cederic and Henke, Christian and Trächtler, Ansgar}, year={2021} }' chicago: Lenz, Cederic, Christian Henke, and Ansgar Trächtler. “Anomaly Detection in Hot Forming Processes Using Hybrid Modeling.” In 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE, 2021. https://doi.org/10.1109/etfa45728.2021.9613629. ieee: 'C. Lenz, C. Henke, and A. Trächtler, “Anomaly detection in hot forming processes using hybrid modeling,” presented at the 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden , 2021, doi: 10.1109/etfa45728.2021.9613629.' mla: Lenz, Cederic, et al. “Anomaly Detection in Hot Forming Processes Using Hybrid Modeling.” 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2021, doi:10.1109/etfa45728.2021.9613629. short: 'C. Lenz, C. Henke, A. Trächtler, in: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2021.' conference: end_date: 2021-09-10 location: 'Vasteras, Sweden ' name: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) start_date: 2021-09-07 date_created: 2022-11-02T16:26:24Z date_updated: 2023-09-25T10:00:28Z department: - _id: '153' - _id: '241' doi: 10.1109/etfa45728.2021.9613629 language: - iso: eng publication: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) publication_status: published publisher: IEEE status: public title: Anomaly detection in hot forming processes using hybrid modeling type: conference user_id: '552' year: '2021' ... --- _id: '24159' abstract: - lang: eng text: "The online fitting of a microscopic traffic simulation model to reconstruct the current state of a real traffic\r\narea can be challenging depending on the provided data. This paper presents a novel method based on limited\r\ndata from sensors positioned at specific locations and guarantees a general accordance of reality and\r\nsimulation in terms of multimodal road traffic counts and vehicle speeds. In these considerations, the actual\r\npurpose of research is of particular importance. Here, the research aims at improving the traffic flow by\r\ncontrolling the Traffic Light Systems (TLS) of the examined area which is why the current traffic state and\r\nthe route choices of individual road users are the matter of interest. An integer optimization problem is derived\r\nto fit the current simulation to the latest field measurements. The concept can be transferred to any road traffic\r\nnetwork and results in an observation of the current multimodal traffic state matching at the given sensor\r\nposition. First case studies show promosing results in terms of deviations between reality and simulation." author: - first_name: Kevin full_name: Malena, Kevin id: '36303' last_name: Malena orcid: 0000-0003-1183-4679 - first_name: Christopher full_name: Link, Christopher id: '38249' last_name: Link - first_name: Sven full_name: Mertin, Sven id: '13195' last_name: Mertin - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Malena K, Link C, Mertin S, Gausemeier S, Trächtler A. Online State Estimation for Microscopic Traffic Simulations using Multiple Data Sources*. In: VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems. Vol 7. VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems. SCITEPRESS; 2021:386-395.' apa: Malena, K., Link, C., Mertin, S., Gausemeier, S., & Trächtler, A. (2021). Online State Estimation for Microscopic Traffic Simulations using Multiple Data Sources*. VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems, 7, 386–395. bibtex: '@inproceedings{Malena_Link_Mertin_Gausemeier_Trächtler_2021, place={Portugal}, series={VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems}, title={Online State Estimation for Microscopic Traffic Simulations using Multiple Data Sources*}, volume={7}, booktitle={VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems}, publisher={SCITEPRESS}, author={Malena, Kevin and Link, Christopher and Mertin, Sven and Gausemeier, Sandra and Trächtler, Ansgar}, year={2021}, pages={386–395}, collection={VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems} }' chicago: 'Malena, Kevin, Christopher Link, Sven Mertin, Sandra Gausemeier, and Ansgar Trächtler. “Online State Estimation for Microscopic Traffic Simulations Using Multiple Data Sources*.” In VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems, 7:386–95. VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems. Portugal: SCITEPRESS, 2021.' ieee: K. Malena, C. Link, S. Mertin, S. Gausemeier, and A. Trächtler, “Online State Estimation for Microscopic Traffic Simulations using Multiple Data Sources*,” in VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems, Online Streaming, 2021, vol. 7, pp. 386–395. mla: Malena, Kevin, et al. “Online State Estimation for Microscopic Traffic Simulations Using Multiple Data Sources*.” VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems, vol. 7, SCITEPRESS, 2021, pp. 386–95. short: 'K. Malena, C. Link, S. Mertin, S. Gausemeier, A. Trächtler, in: VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems, SCITEPRESS, Portugal, 2021, pp. 386–395.' conference: end_date: 2021-04-30 location: Online Streaming name: 7th International Conference on Vehicle Technology and Intelligent Transport Systems start_date: 2021-04-28 date_created: 2021-09-10T12:19:14Z date_updated: 2026-01-26T08:49:53Z department: - _id: '153' intvolume: ' 7' keyword: - Microscopic Traffic Simulation - Online State Estimation - Mixed Road Users - Sensor Fusion - Integer Programming - Route Choice - Vehicle2Infrastructure language: - iso: eng main_file_link: - url: https://www.scitepress.org/PublicationsDetail.aspx?ID=3xZWfOSENWk=&t=1 page: 386-395 place: Portugal project: - _id: '688' name: Pilotprojekt "Schlosskreuzung" publication: VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems publication_identifier: isbn: - 978-989-758-513-5 publication_status: published publisher: SCITEPRESS quality_controlled: '1' related_material: link: - relation: confirmation url: https://www.scitepress.org/PublicationsDetail.aspx?ID=3xZWfOSENWk=&t=1 record: - id: '33849' relation: is_continued_by status: public series_title: VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems status: public title: Online State Estimation for Microscopic Traffic Simulations using Multiple Data Sources* type: conference user_id: '36303' volume: 7 year: '2021' ... --- _id: '24166' abstract: - lang: eng text: This paper deals with a novel method for the online fitting of a microscopic traffic simulation model to the current state of a real world traffic area. The traffic state estimation is based on limited data of different measurement sources and guarantees general accordance of reality and simulation in terms of multimodal road traffic counts and vehicle speeds. The research is embedded in the challenge of improving the traffic by controlling the traffic light systems (TLS) of the examined area. Therefore, the current traffic state and the predicted route choices of individual road users are the matter of interest. The concept is generally transferable to any road traffic system. To give an impression of the accuracy and potential of the approach, the validation and first application results are presented. author: - first_name: Kevin full_name: Malena, Kevin id: '36303' last_name: Malena orcid: 0000-0003-1183-4679 - first_name: Christopher full_name: Link, Christopher id: '38249' last_name: Link - first_name: Sven full_name: Mertin, Sven id: '13195' last_name: Mertin - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Malena K, Link C, Mertin S, Gausemeier S, Trächtler A. Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆. In: 2021 IEEE Transportation Electrification Conference & Expo (ITEC). IEEE; 2021. doi:10.1109/itec51675.2021.9490087' apa: Malena, K., Link, C., Mertin, S., Gausemeier, S., & Trächtler, A. (2021). Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆. 2021 IEEE Transportation Electrification Conference & Expo (ITEC). 2021 IEEE Transportation Electrification Conference & Expo (ITEC). https://doi.org/10.1109/itec51675.2021.9490087 bibtex: '@inproceedings{Malena_Link_Mertin_Gausemeier_Trächtler_2021, place={Chicago, IL, USA }, title={Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆}, DOI={10.1109/itec51675.2021.9490087}, booktitle={2021 IEEE Transportation Electrification Conference & Expo (ITEC)}, publisher={IEEE}, author={Malena, Kevin and Link, Christopher and Mertin, Sven and Gausemeier, Sandra and Trächtler, Ansgar}, year={2021} }' chicago: 'Malena, Kevin, Christopher Link, Sven Mertin, Sandra Gausemeier, and Ansgar Trächtler. “Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆.” In 2021 IEEE Transportation Electrification Conference & Expo (ITEC). Chicago, IL, USA : IEEE, 2021. https://doi.org/10.1109/itec51675.2021.9490087.' ieee: 'K. Malena, C. Link, S. Mertin, S. Gausemeier, and A. Trächtler, “Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆,” presented at the 2021 IEEE Transportation Electrification Conference & Expo (ITEC), 2021, doi: 10.1109/itec51675.2021.9490087.' mla: Malena, Kevin, et al. “Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆.” 2021 IEEE Transportation Electrification Conference & Expo (ITEC), IEEE, 2021, doi:10.1109/itec51675.2021.9490087. short: 'K. Malena, C. Link, S. Mertin, S. Gausemeier, A. Trächtler, in: 2021 IEEE Transportation Electrification Conference & Expo (ITEC), IEEE, Chicago, IL, USA , 2021.' conference: end_date: 2021-05-25 name: 2021 IEEE Transportation Electrification Conference & Expo (ITEC) start_date: 2021-05-21 date_created: 2021-09-10T12:45:25Z date_updated: 2026-01-26T08:50:10Z department: - _id: '153' doi: 10.1109/itec51675.2021.9490087 language: - iso: eng main_file_link: - open_access: '1' url: https://ieeexplore.ieee.org/document/9490087 oa: '1' place: 'Chicago, IL, USA ' project: - _id: '688' name: Pilotprojekt "Schlosskreuzung" publication: 2021 IEEE Transportation Electrification Conference & Expo (ITEC) publication_identifier: isbn: - 978-1-7281-7584-3 publication_status: published publisher: IEEE related_material: link: - relation: confirmation url: https://ieeexplore.ieee.org/document/9490087 status: public title: Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆ type: conference user_id: '36303' year: '2021' ... --- _id: '27130' author: - first_name: Vladimir I. full_name: Poddubnyi, Vladimir I. last_name: Poddubnyi - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Andreas full_name: Warkentin, Andreas last_name: Warkentin - first_name: Christian full_name: Henke, Christian last_name: Henke citation: ama: Poddubnyi VI, Trächtler A, Warkentin A, Henke C. Mechanical and mathematical model of a caterpillar drive with a triangular contour for solving problems of vertical dynamics of a tracked vehicle. Vestnik Mashinostroeniya. Published online 2020:26-29. doi:10.36652/0042-4633-2020-12-26-29 apa: Poddubnyi, V. I., Trächtler, A., Warkentin, A., & Henke, C. (2020). Mechanical and mathematical model of a caterpillar drive with a triangular contour for solving problems of vertical dynamics of a tracked vehicle. Vestnik Mashinostroeniya, 26–29. https://doi.org/10.36652/0042-4633-2020-12-26-29 bibtex: '@article{Poddubnyi_Trächtler_Warkentin_Henke_2020, title={Mechanical and mathematical model of a caterpillar drive with a triangular contour for solving problems of vertical dynamics of a tracked vehicle}, DOI={10.36652/0042-4633-2020-12-26-29}, journal={Vestnik Mashinostroeniya}, author={Poddubnyi, Vladimir I. and Trächtler, Ansgar and Warkentin, Andreas and Henke, Christian}, year={2020}, pages={26–29} }' chicago: Poddubnyi, Vladimir I., Ansgar Trächtler, Andreas Warkentin, and Christian Henke. “Mechanical and Mathematical Model of a Caterpillar Drive with a Triangular Contour for Solving Problems of Vertical Dynamics of a Tracked Vehicle.” Vestnik Mashinostroeniya, 2020, 26–29. https://doi.org/10.36652/0042-4633-2020-12-26-29. ieee: 'V. I. Poddubnyi, A. Trächtler, A. Warkentin, and C. Henke, “Mechanical and mathematical model of a caterpillar drive with a triangular contour for solving problems of vertical dynamics of a tracked vehicle,” Vestnik Mashinostroeniya, pp. 26–29, 2020, doi: 10.36652/0042-4633-2020-12-26-29.' mla: Poddubnyi, Vladimir I., et al. “Mechanical and Mathematical Model of a Caterpillar Drive with a Triangular Contour for Solving Problems of Vertical Dynamics of a Tracked Vehicle.” Vestnik Mashinostroeniya, 2020, pp. 26–29, doi:10.36652/0042-4633-2020-12-26-29. short: V.I. Poddubnyi, A. Trächtler, A. Warkentin, C. Henke, Vestnik Mashinostroeniya (2020) 26–29. date_created: 2021-11-03T14:26:14Z date_updated: 2022-01-06T06:57:35Z department: - _id: '241' - _id: '153' doi: 10.36652/0042-4633-2020-12-26-29 language: - iso: eng page: 26-29 publication: Vestnik Mashinostroeniya status: public title: Mechanical and mathematical model of a caterpillar drive with a triangular contour for solving problems of vertical dynamics of a tracked vehicle type: journal_article user_id: '24876' year: '2020' ... --- _id: '22963' author: - first_name: Patrick full_name: Biemelt, Patrick id: '24876' last_name: Biemelt - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: Biemelt P, Gausemeier S, Trächtler A. Design and Objective Evaluation of Filter- and Optimization-based Motion Cueing Strategies for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom. International Journal On Advances in Systems and Measurements. 2020;13(3 & 4):203-219. apa: Biemelt, P., Gausemeier, S., & Trächtler, A. (2020). Design and Objective Evaluation of Filter- and Optimization-based Motion Cueing Strategies for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom. International Journal On Advances in Systems and Measurements, 13(3 & 4), 203–219. bibtex: '@article{Biemelt_Gausemeier_Trächtler_2020, title={Design and Objective Evaluation of Filter- and Optimization-based Motion Cueing Strategies for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom}, volume={13}, number={3 & 4}, journal={International Journal On Advances in Systems and Measurements}, author={Biemelt, Patrick and Gausemeier, Sandra and Trächtler, Ansgar}, year={2020}, pages={203–219} }' chicago: 'Biemelt, Patrick, Sandra Gausemeier, and Ansgar Trächtler. “Design and Objective Evaluation of Filter- and Optimization-Based Motion Cueing Strategies for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom.” International Journal On Advances in Systems and Measurements 13, no. 3 & 4 (2020): 203–19.' ieee: P. Biemelt, S. Gausemeier, and A. Trächtler, “Design and Objective Evaluation of Filter- and Optimization-based Motion Cueing Strategies for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom,” International Journal On Advances in Systems and Measurements, vol. 13, no. 3 & 4, pp. 203–219, 2020. mla: Biemelt, Patrick, et al. “Design and Objective Evaluation of Filter- and Optimization-Based Motion Cueing Strategies for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom.” International Journal On Advances in Systems and Measurements, vol. 13, no. 3 & 4, 2020, pp. 203–19. short: P. Biemelt, S. Gausemeier, A. Trächtler, International Journal On Advances in Systems and Measurements 13 (2020) 203–219. date_created: 2021-08-09T05:16:48Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' intvolume: ' 13' issue: 3 & 4 language: - iso: eng page: 203-219 publication: International Journal On Advances in Systems and Measurements status: public title: Design and Objective Evaluation of Filter- and Optimization-based Motion Cueing Strategies for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom type: journal_article user_id: '24876' volume: 13 year: '2020' ... --- _id: '22964' author: - first_name: Patrick full_name: Biemelt, Patrick id: '24876' last_name: Biemelt - first_name: Sven full_name: Mertin, Sven id: '13195' last_name: Mertin - first_name: Nico full_name: Rüddenklau, Nico id: '22359' last_name: Rüddenklau - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Biemelt P, Mertin S, Rüddenklau N, Gausemeier S, Trächtler A. Design and Evaluation of a Novel Filter-Based Motion Cueing Strategy for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom. In: Proceedings of the Driving Simulation Conference Europe VR. Driving Simulation Association; 2020:85-92.' apa: Biemelt, P., Mertin, S., Rüddenklau, N., Gausemeier, S., & Trächtler, A. (2020). Design and Evaluation of a Novel Filter-Based Motion Cueing Strategy for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom. Proceedings of the Driving Simulation Conference Europe VR, 85–92. bibtex: '@inproceedings{Biemelt_Mertin_Rüddenklau_Gausemeier_Trächtler_2020, title={Design and Evaluation of a Novel Filter-Based Motion Cueing Strategy for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom}, booktitle={Proceedings of the Driving Simulation Conference Europe VR}, publisher={Driving Simulation Association}, author={Biemelt, Patrick and Mertin, Sven and Rüddenklau, Nico and Gausemeier, Sandra and Trächtler, Ansgar}, year={2020}, pages={85–92} }' chicago: Biemelt, Patrick, Sven Mertin, Nico Rüddenklau, Sandra Gausemeier, and Ansgar Trächtler. “Design and Evaluation of a Novel Filter-Based Motion Cueing Strategy for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom.” In Proceedings of the Driving Simulation Conference Europe VR, 85–92. Driving Simulation Association, 2020. ieee: P. Biemelt, S. Mertin, N. Rüddenklau, S. Gausemeier, and A. Trächtler, “Design and Evaluation of a Novel Filter-Based Motion Cueing Strategy for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom,” in Proceedings of the Driving Simulation Conference Europe VR, Antibes, France, 2020, pp. 85–92. mla: Biemelt, Patrick, et al. “Design and Evaluation of a Novel Filter-Based Motion Cueing Strategy for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom.” Proceedings of the Driving Simulation Conference Europe VR, Driving Simulation Association, 2020, pp. 85–92. short: 'P. Biemelt, S. Mertin, N. Rüddenklau, S. Gausemeier, A. Trächtler, in: Proceedings of the Driving Simulation Conference Europe VR, Driving Simulation Association, 2020, pp. 85–92.' conference: location: Antibes, France name: Driving Simulation Conference Europe VR date_created: 2021-08-09T05:16:49Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' language: - iso: eng page: 85-92 publication: Proceedings of the Driving Simulation Conference Europe VR publisher: Driving Simulation Association status: public title: Design and Evaluation of a Novel Filter-Based Motion Cueing Strategy for a Hybrid Kinematics Driving Simulator with 5 Degrees of Freedom type: conference user_id: '24876' year: '2020' ... --- _id: '22966' author: - first_name: Sven full_name: Mertin, Sven id: '13195' last_name: Mertin - first_name: Kevin full_name: Malena, Kevin id: '36303' last_name: Malena - first_name: Christopher full_name: Link, Christopher id: '38249' last_name: Link - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Mertin S, Malena K, Link C, Gausemeier S, Trächtler A. Macroscopic Traffic Flow Control using Consensus Algorithms. In: The 23rd IEEE International Conference on Intelligent Transportation Systems. Vol 23. https://www.ieee-itsc2020.org/: International Conference on Intelligent Transportation Systems (ITSC); 2020.' apa: 'Mertin, S., Malena, K., Link, C., Gausemeier, S., & Trächtler, A. (2020). Macroscopic Traffic Flow Control using Consensus Algorithms. In The 23rd IEEE International Conference on Intelligent Transportation Systems (Vol. 23). https://www.ieee-itsc2020.org/: International Conference on Intelligent Transportation Systems (ITSC).' bibtex: '@inproceedings{Mertin_Malena_Link_Gausemeier_Trächtler_2020, place={https://www.ieee-itsc2020.org/}, title={Macroscopic Traffic Flow Control using Consensus Algorithms}, volume={23}, booktitle={The 23rd IEEE International Conference on Intelligent Transportation Systems}, publisher={International Conference on Intelligent Transportation Systems (ITSC)}, author={Mertin, Sven and Malena, Kevin and Link, Christopher and Gausemeier, Sandra and Trächtler, Ansgar}, year={2020} }' chicago: 'Mertin, Sven, Kevin Malena, Christopher Link, Sandra Gausemeier, and Ansgar Trächtler. “Macroscopic Traffic Flow Control Using Consensus Algorithms.” In The 23rd IEEE International Conference on Intelligent Transportation Systems, Vol. 23. https://www.ieee-itsc2020.org/: International Conference on Intelligent Transportation Systems (ITSC), 2020.' ieee: S. Mertin, K. Malena, C. Link, S. Gausemeier, and A. Trächtler, “Macroscopic Traffic Flow Control using Consensus Algorithms,” in The 23rd IEEE International Conference on Intelligent Transportation Systems, 2020, vol. 23. mla: Mertin, Sven, et al. “Macroscopic Traffic Flow Control Using Consensus Algorithms.” The 23rd IEEE International Conference on Intelligent Transportation Systems, vol. 23, International Conference on Intelligent Transportation Systems (ITSC), 2020. short: 'S. Mertin, K. Malena, C. Link, S. Gausemeier, A. Trächtler, in: The 23rd IEEE International Conference on Intelligent Transportation Systems, International Conference on Intelligent Transportation Systems (ITSC), https://www.ieee-itsc2020.org/, 2020.' date_created: 2021-08-09T05:16:51Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' intvolume: ' 23' language: - iso: eng place: https://www.ieee-itsc2020.org/ publication: The 23rd IEEE International Conference on Intelligent Transportation Systems publisher: International Conference on Intelligent Transportation Systems (ITSC) status: public title: Macroscopic Traffic Flow Control using Consensus Algorithms type: conference user_id: '24876' volume: 23 year: '2020' ... --- _id: '22967' author: - first_name: Georgi full_name: Nareyko, Georgi last_name: Nareyko - first_name: Patrick full_name: Biemelt, Patrick id: '24876' last_name: Biemelt - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Nareyko G, Biemelt P, Trächtler A. Real-Time Optimized Model Predictive Control of an Active Roll Stabilization System with Actuator Limitations. In: Proceedings of the 21st IFAC World Congress. IFAC; 2020.' apa: Nareyko, G., Biemelt, P., & Trächtler, A. (2020). Real-Time Optimized Model Predictive Control of an Active Roll Stabilization System with Actuator Limitations. Proceedings of the 21st IFAC World Congress. 21st IFAC World Congress, Berlin, Germany. bibtex: '@inproceedings{Nareyko_Biemelt_Trächtler_2020, title={Real-Time Optimized Model Predictive Control of an Active Roll Stabilization System with Actuator Limitations}, booktitle={Proceedings of the 21st IFAC World Congress}, publisher={IFAC}, author={Nareyko, Georgi and Biemelt, Patrick and Trächtler, Ansgar}, year={2020} }' chicago: Nareyko, Georgi, Patrick Biemelt, and Ansgar Trächtler. “Real-Time Optimized Model Predictive Control of an Active Roll Stabilization System with Actuator Limitations.” In Proceedings of the 21st IFAC World Congress. IFAC, 2020. ieee: G. Nareyko, P. Biemelt, and A. Trächtler, “Real-Time Optimized Model Predictive Control of an Active Roll Stabilization System with Actuator Limitations,” presented at the 21st IFAC World Congress, Berlin, Germany, 2020. mla: Nareyko, Georgi, et al. “Real-Time Optimized Model Predictive Control of an Active Roll Stabilization System with Actuator Limitations.” Proceedings of the 21st IFAC World Congress, IFAC, 2020. short: 'G. Nareyko, P. Biemelt, A. Trächtler, in: Proceedings of the 21st IFAC World Congress, IFAC, 2020.' conference: location: Berlin, Germany name: 21st IFAC World Congress date_created: 2021-08-09T05:16:52Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' language: - iso: eng publication: Proceedings of the 21st IFAC World Congress publisher: IFAC status: public title: Real-Time Optimized Model Predictive Control of an Active Roll Stabilization System with Actuator Limitations type: conference user_id: '24876' year: '2020' ... --- _id: '22968' author: - first_name: Patrick full_name: Biemelt, Patrick id: '24876' last_name: Biemelt - first_name: Christopher full_name: Link, Christopher id: '38249' last_name: Link - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Biemelt P, Link C, Gausemeier S, Trächtler A. A Model-Based Online Reference Prediction Strategy for Model Predictive Motion Cueing Algorithms. In: Proceedings of the 21st IFAC World Congress. ; 2020:6082-6088.' apa: Biemelt, P., Link, C., Gausemeier, S., & Trächtler, A. (2020). A Model-Based Online Reference Prediction Strategy for Model Predictive Motion Cueing Algorithms. Proceedings of the 21st IFAC World Congress, 6082–6088. bibtex: '@inproceedings{Biemelt_Link_Gausemeier_Trächtler_2020, title={A Model-Based Online Reference Prediction Strategy for Model Predictive Motion Cueing Algorithms}, booktitle={Proceedings of the 21st IFAC World Congress}, author={Biemelt, Patrick and Link, Christopher and Gausemeier, Sandra and Trächtler, Ansgar}, year={2020}, pages={6082–6088} }' chicago: Biemelt, Patrick, Christopher Link, Sandra Gausemeier, and Ansgar Trächtler. “A Model-Based Online Reference Prediction Strategy for Model Predictive Motion Cueing Algorithms.” In Proceedings of the 21st IFAC World Congress, 6082–88, 2020. ieee: P. Biemelt, C. Link, S. Gausemeier, and A. Trächtler, “A Model-Based Online Reference Prediction Strategy for Model Predictive Motion Cueing Algorithms,” in Proceedings of the 21st IFAC World Congress, Berlin, Germany, 2020, pp. 6082–6088. mla: Biemelt, Patrick, et al. “A Model-Based Online Reference Prediction Strategy for Model Predictive Motion Cueing Algorithms.” Proceedings of the 21st IFAC World Congress, 2020, pp. 6082–88. short: 'P. Biemelt, C. Link, S. Gausemeier, A. Trächtler, in: Proceedings of the 21st IFAC World Congress, 2020, pp. 6082–6088.' conference: location: Berlin, Germany name: 21st IFAC World Congress date_created: 2021-08-09T05:16:54Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' language: - iso: eng page: 6082 - 6088 publication: Proceedings of the 21st IFAC World Congress status: public title: A Model-Based Online Reference Prediction Strategy for Model Predictive Motion Cueing Algorithms type: conference user_id: '24876' year: '2020' ... --- _id: '22969' author: - first_name: Stefan full_name: Schütz, Stefan last_name: Schütz - first_name: Arne Thorsten full_name: Rüting, Arne Thorsten last_name: Rüting - first_name: Christian full_name: Henke, Christian last_name: Henke - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Schütz S, Rüting AT, Henke C, Trächtler A. Echtzeitfähige Planung optimierter Trajektorien für sensorgeführte, kinematisch redundante Mechanismen auf einer Industriesteuerung. In: Entwurf Komplexer Automatisierungssysteme (EKA). ; 2020.' apa: Schütz, S., Rüting, A. T., Henke, C., & Trächtler, A. (2020). Echtzeitfähige Planung optimierter Trajektorien für sensorgeführte, kinematisch redundante Mechanismen auf einer Industriesteuerung. In Entwurf komplexer Automatisierungssysteme (EKA). bibtex: '@inproceedings{Schütz_Rüting_Henke_Trächtler_2020, title={Echtzeitfähige Planung optimierter Trajektorien für sensorgeführte, kinematisch redundante Mechanismen auf einer Industriesteuerung}, booktitle={Entwurf komplexer Automatisierungssysteme (EKA)}, author={Schütz, Stefan and Rüting, Arne Thorsten and Henke, Christian and Trächtler, Ansgar}, year={2020} }' chicago: Schütz, Stefan, Arne Thorsten Rüting, Christian Henke, and Ansgar Trächtler. “Echtzeitfähige Planung Optimierter Trajektorien Für Sensorgeführte, Kinematisch Redundante Mechanismen Auf Einer Industriesteuerung.” In Entwurf Komplexer Automatisierungssysteme (EKA), 2020. ieee: S. Schütz, A. T. Rüting, C. Henke, and A. Trächtler, “Echtzeitfähige Planung optimierter Trajektorien für sensorgeführte, kinematisch redundante Mechanismen auf einer Industriesteuerung,” in Entwurf komplexer Automatisierungssysteme (EKA), 2020. mla: Schütz, Stefan, et al. “Echtzeitfähige Planung Optimierter Trajektorien Für Sensorgeführte, Kinematisch Redundante Mechanismen Auf Einer Industriesteuerung.” Entwurf Komplexer Automatisierungssysteme (EKA), 2020. short: 'S. Schütz, A.T. Rüting, C. Henke, A. Trächtler, in: Entwurf Komplexer Automatisierungssysteme (EKA), 2020.' date_created: 2021-08-09T05:16:55Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' - _id: '241' language: - iso: eng publication: Entwurf komplexer Automatisierungssysteme (EKA) status: public title: Echtzeitfähige Planung optimierter Trajektorien für sensorgeführte, kinematisch redundante Mechanismen auf einer Industriesteuerung type: conference user_id: '24876' year: '2020' ... --- _id: '42068' author: - first_name: Alexander full_name: Gense, Alexander last_name: Gense citation: ama: Gense A. Mechatronischer Entwurf eines geregelten Federungssystems für mittelschwere gepanzerte Kettenfahrzeuge.; 2020. apa: Gense, A. (2020). Mechatronischer Entwurf eines geregelten Federungssystems für mittelschwere gepanzerte Kettenfahrzeuge. bibtex: '@book{Gense_2020, title={Mechatronischer Entwurf eines geregelten Federungssystems für mittelschwere gepanzerte Kettenfahrzeuge}, author={Gense, Alexander}, year={2020} }' chicago: Gense, Alexander. Mechatronischer Entwurf eines geregelten Federungssystems für mittelschwere gepanzerte Kettenfahrzeuge, 2020. ieee: A. Gense, Mechatronischer Entwurf eines geregelten Federungssystems für mittelschwere gepanzerte Kettenfahrzeuge. 2020. mla: Gense, Alexander. Mechatronischer Entwurf eines geregelten Federungssystems für mittelschwere gepanzerte Kettenfahrzeuge. 2020. short: A. Gense, Mechatronischer Entwurf eines geregelten Federungssystems für mittelschwere gepanzerte Kettenfahrzeuge, 2020. date_created: 2023-02-14T10:53:20Z date_updated: 2023-02-15T11:14:49Z department: - _id: '153' - _id: '241' language: - iso: ger main_file_link: - open_access: '1' url: https://digital.ub.uni-paderborn.de/urn/urn:nbn:de:hbz:466:2-38177 oa: '1' publication_status: published status: public supervisor: - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler title: Mechatronischer Entwurf eines geregelten Federungssystems für mittelschwere gepanzerte Kettenfahrzeuge type: dissertation user_id: '82875' year: '2020' ... --- _id: '42067' author: - first_name: Fabian full_name: Bertelsmeier, Fabian last_name: Bertelsmeier citation: ama: Bertelsmeier F. Produkttolerante Automation zellenbasierter Fertigungssysteme.; 2020. apa: Bertelsmeier, F. (2020). Produkttolerante Automation zellenbasierter Fertigungssysteme. bibtex: '@book{Bertelsmeier_2020, title={Produkttolerante Automation zellenbasierter Fertigungssysteme}, author={Bertelsmeier, Fabian}, year={2020} }' chicago: Bertelsmeier, Fabian. Produkttolerante Automation zellenbasierter Fertigungssysteme, 2020. ieee: F. Bertelsmeier, Produkttolerante Automation zellenbasierter Fertigungssysteme. 2020. mla: Bertelsmeier, Fabian. Produkttolerante Automation zellenbasierter Fertigungssysteme. 2020. short: F. Bertelsmeier, Produkttolerante Automation zellenbasierter Fertigungssysteme, 2020. date_created: 2023-02-14T10:51:40Z date_updated: 2023-02-15T10:30:24Z department: - _id: '153' - _id: '241' language: - iso: ger main_file_link: - open_access: '1' url: https://digital.ub.uni-paderborn.de/doi/10.17619/UNIPB/1-890 oa: '1' publication_status: published status: public supervisor: - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler title: Produkttolerante Automation zellenbasierter Fertigungssysteme type: dissertation user_id: '82875' year: '2020' ... --- _id: '28368' author: - first_name: Matthias full_name: Lochbichler, Matthias last_name: Lochbichler citation: ama: Lochbichler M. Systematische Wahl einer Modellierungstiefe im Entwurfsprozess mechatronischer Systeme. Vol 394. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2020. apa: Lochbichler, M. (2020). Systematische Wahl einer Modellierungstiefe im Entwurfsprozess mechatronischer Systeme (Vol. 394). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. bibtex: '@book{Lochbichler_2020, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, title={Systematische Wahl einer Modellierungstiefe im Entwurfsprozess mechatronischer Systeme}, volume={394}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, author={Lochbichler, Matthias}, year={2020}, collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn} }' chicago: Lochbichler, Matthias. Systematische Wahl einer Modellierungstiefe im Entwurfsprozess mechatronischer Systeme. Vol. 394. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2020. ieee: M. Lochbichler, Systematische Wahl einer Modellierungstiefe im Entwurfsprozess mechatronischer Systeme, vol. 394. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2020. mla: Lochbichler, Matthias. Systematische Wahl einer Modellierungstiefe im Entwurfsprozess mechatronischer Systeme. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2020. short: M. Lochbichler, Systematische Wahl einer Modellierungstiefe im Entwurfsprozess mechatronischer Systeme, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2020. date_created: 2021-12-07T13:37:10Z date_updated: 2023-02-27T08:11:11Z department: - _id: '26' - _id: '153' intvolume: ' 394' language: - iso: ger publication_identifier: isbn: - 978-3-947647-13-2 publication_status: published publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn status: public title: Systematische Wahl einer Modellierungstiefe im Entwurfsprozess mechatronischer Systeme type: dissertation user_id: '14931' volume: 394 year: '2020' ... --- _id: '22965' author: - first_name: Julian full_name: Rozo Vasquez, Julian last_name: Rozo Vasquez - first_name: Bahman full_name: Arian, Bahman id: '36287' last_name: Arian - first_name: Markus full_name: Riepold, Markus last_name: Riepold - first_name: Werner full_name: Homberg, Werner id: '233' last_name: Homberg - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Frank full_name: Walther, Frank last_name: Walther citation: ama: 'Rozo Vasquez J, Arian B, Riepold M, Homberg W, Trächtler A, Walther F. Microstructural investigation on phase transformation during flow forming of the metastable austenite AISI 304 . In: 54. Metallographie-Tagung. ; 2020:75-81.' apa: Rozo Vasquez, J., Arian, B., Riepold, M., Homberg, W., Trächtler, A., & Walther, F. (2020). Microstructural investigation on phase transformation during flow forming of the metastable austenite AISI 304 . 54. Metallographie-Tagung, 75–81. bibtex: '@inproceedings{Rozo Vasquez_Arian_Riepold_Homberg_Trächtler_Walther_2020, title={Microstructural investigation on phase transformation during flow forming of the metastable austenite AISI 304 }, booktitle={ 54. Metallographie-Tagung}, author={Rozo Vasquez, Julian and Arian, Bahman and Riepold, Markus and Homberg, Werner and Trächtler, Ansgar and Walther, Frank}, year={2020}, pages={75–81} }' chicago: Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Microstructural Investigation on Phase Transformation during Flow Forming of the Metastable Austenite AISI 304 .” In 54. Metallographie-Tagung, 75–81, 2020. ieee: J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, and F. Walther, “Microstructural investigation on phase transformation during flow forming of the metastable austenite AISI 304 ,” in 54. Metallographie-Tagung, 2020, pp. 75–81. mla: Rozo Vasquez, Julian, et al. “Microstructural Investigation on Phase Transformation during Flow Forming of the Metastable Austenite AISI 304 .” 54. Metallographie-Tagung, 2020, pp. 75–81. short: 'J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, F. Walther, in: 54. Metallographie-Tagung, 2020, pp. 75–81.' date_created: 2021-08-09T05:16:50Z date_updated: 2023-05-02T08:20:55Z department: - _id: '153' - _id: '241' - _id: '156' language: - iso: eng page: 75-81 publication: ' 54. Metallographie-Tagung' quality_controlled: '1' status: public title: 'Microstructural investigation on phase transformation during flow forming of the metastable austenite AISI 304 ' type: conference user_id: '36287' year: '2020' ... --- _id: '22970' author: - first_name: Patrick full_name: Biemelt, Patrick id: '24876' last_name: Biemelt - first_name: Sven full_name: Mertin, Sven id: '13195' last_name: Mertin - first_name: Nico full_name: Rüddenklau, Nico id: '22359' last_name: Rüddenklau - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Biemelt P, Mertin S, Rüddenklau N, Gausemeier S, Trächtler A. Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation. In: Proceedings of the International Conference on Advances in System Simulation (SIMUL). IARIA; 2019.' apa: Biemelt, P., Mertin, S., Rüddenklau, N., Gausemeier, S., & Trächtler, A. (2019). Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation. Proceedings of the International Conference on Advances in System Simulation (SIMUL). International Conference on Advances in System Simulation (SIMUL), Valencia, Spain. bibtex: '@inproceedings{Biemelt_Mertin_Rüddenklau_Gausemeier_Trächtler_2019, title={Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation}, booktitle={Proceedings of the International Conference on Advances in System Simulation (SIMUL)}, publisher={IARIA}, author={Biemelt, Patrick and Mertin, Sven and Rüddenklau, Nico and Gausemeier, Sandra and Trächtler, Ansgar}, year={2019} }' chicago: Biemelt, Patrick, Sven Mertin, Nico Rüddenklau, Sandra Gausemeier, and Ansgar Trächtler. “Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation.” In Proceedings of the International Conference on Advances in System Simulation (SIMUL). IARIA, 2019. ieee: P. Biemelt, S. Mertin, N. Rüddenklau, S. Gausemeier, and A. Trächtler, “Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation,” presented at the International Conference on Advances in System Simulation (SIMUL), Valencia, Spain, 2019. mla: Biemelt, Patrick, et al. “Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation.” Proceedings of the International Conference on Advances in System Simulation (SIMUL), IARIA, 2019. short: 'P. Biemelt, S. Mertin, N. Rüddenklau, S. Gausemeier, A. Trächtler, in: Proceedings of the International Conference on Advances in System Simulation (SIMUL), IARIA, 2019.' conference: location: Valencia, Spain name: ' International Conference on Advances in System Simulation (SIMUL)' date_created: 2021-08-09T05:21:41Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' language: - iso: eng publication: Proceedings of the International Conference on Advances in System Simulation (SIMUL) publisher: IARIA status: public title: Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation type: conference user_id: '24876' year: '2019' ... --- _id: '22971' author: - first_name: Nico full_name: Rüddenklau, Nico id: '22359' last_name: Rüddenklau - first_name: Patrick full_name: Biemelt, Patrick id: '24876' last_name: Biemelt - first_name: Sven full_name: Mertin, Sven id: '13195' last_name: Mertin - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Rüddenklau N, Biemelt P, Mertin S, Gausemeier S, Trächtler A. Simulation-Based Lighting Function Development of High-Definition Headlamps. In: 13th International Symposium on Automotive Lighting (ISAL). Vol 18. utzverlag GmbH; 2019:677-686.' apa: Rüddenklau, N., Biemelt, P., Mertin, S., Gausemeier, S., & Trächtler, A. (2019). Simulation-Based Lighting Function Development of High-Definition Headlamps. In 13th International Symposium on Automotive Lighting (ISAL) (Vol. 18, pp. 677–686). utzverlag GmbH. bibtex: '@inbook{Rüddenklau_Biemelt_Mertin_Gausemeier_Trächtler_2019, title={Simulation-Based Lighting Function Development of High-Definition Headlamps}, volume={18}, booktitle={13th International Symposium on Automotive Lighting (ISAL)}, publisher={utzverlag GmbH}, author={Rüddenklau, Nico and Biemelt, Patrick and Mertin, Sven and Gausemeier, Sandra and Trächtler, Ansgar}, year={2019}, pages={677–686} }' chicago: Rüddenklau, Nico, Patrick Biemelt, Sven Mertin, Sandra Gausemeier, and Ansgar Trächtler. “Simulation-Based Lighting Function Development of High-Definition Headlamps.” In 13th International Symposium on Automotive Lighting (ISAL), 18:677–86. utzverlag GmbH, 2019. ieee: N. Rüddenklau, P. Biemelt, S. Mertin, S. Gausemeier, and A. Trächtler, “Simulation-Based Lighting Function Development of High-Definition Headlamps,” in 13th International Symposium on Automotive Lighting (ISAL), vol. 18, utzverlag GmbH, 2019, pp. 677–686. mla: Rüddenklau, Nico, et al. “Simulation-Based Lighting Function Development of High-Definition Headlamps.” 13th International Symposium on Automotive Lighting (ISAL), vol. 18, utzverlag GmbH, 2019, pp. 677–86. short: 'N. Rüddenklau, P. Biemelt, S. Mertin, S. Gausemeier, A. Trächtler, in: 13th International Symposium on Automotive Lighting (ISAL), utzverlag GmbH, 2019, pp. 677–686.' date_created: 2021-08-09T05:21:42Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' intvolume: ' 18' language: - iso: eng page: 677-686 publication: 13th International Symposium on Automotive Lighting (ISAL) publisher: utzverlag GmbH status: public title: Simulation-Based Lighting Function Development of High-Definition Headlamps type: book_chapter user_id: '24876' volume: 18 year: '2019' ... --- _id: '22972' author: - first_name: Sven full_name: Mertin, Sven id: '13195' last_name: Mertin - first_name: Dominik full_name: Buse, Dominik last_name: Buse - first_name: Mario full_name: Franke, Mario last_name: Franke - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Falko full_name: Dressler, Falko id: '48097' last_name: Dressler orcid: 0000-0002-1989-1750 citation: ama: 'Mertin S, Buse D, Franke M, Trächtler A, Gausemeier S, Dressler F. Proof-of-Concept einer komplexen Co-Simulationsumgebung für einen Fahrsimulator zur Untersuchung von Car2X-Kommunikations-Szenarien. In: VDI/VDE AUTOREG 2019. 9. VDI/VDE-Fachtagung AUTOREG. Mannheim, Deutschland: VDI Verlag Düsseldorf; 2019:159-170.' apa: 'Mertin, S., Buse, D., Franke, M., Trächtler, A., Gausemeier, S., & Dressler, F. (2019). Proof-of-Concept einer komplexen Co-Simulationsumgebung für einen Fahrsimulator zur Untersuchung von Car2X-Kommunikations-Szenarien. In VDI/VDE AUTOREG 2019 (pp. 159–170). Mannheim, Deutschland: VDI Verlag Düsseldorf.' bibtex: '@inproceedings{Mertin_Buse_Franke_Trächtler_Gausemeier_Dressler_2019, place={Mannheim, Deutschland}, series={9. VDI/VDE-Fachtagung AUTOREG}, title={Proof-of-Concept einer komplexen Co-Simulationsumgebung für einen Fahrsimulator zur Untersuchung von Car2X-Kommunikations-Szenarien}, booktitle={VDI/VDE AUTOREG 2019}, publisher={VDI Verlag Düsseldorf}, author={Mertin, Sven and Buse, Dominik and Franke, Mario and Trächtler, Ansgar and Gausemeier, Sandra and Dressler, Falko}, year={2019}, pages={159–170}, collection={9. VDI/VDE-Fachtagung AUTOREG} }' chicago: 'Mertin, Sven, Dominik Buse, Mario Franke, Ansgar Trächtler, Sandra Gausemeier, and Falko Dressler. “Proof-of-Concept Einer Komplexen Co-Simulationsumgebung Für Einen Fahrsimulator Zur Untersuchung von Car2X-Kommunikations-Szenarien.” In VDI/VDE AUTOREG 2019, 159–70. 9. VDI/VDE-Fachtagung AUTOREG. Mannheim, Deutschland: VDI Verlag Düsseldorf, 2019.' ieee: S. Mertin, D. Buse, M. Franke, A. Trächtler, S. Gausemeier, and F. Dressler, “Proof-of-Concept einer komplexen Co-Simulationsumgebung für einen Fahrsimulator zur Untersuchung von Car2X-Kommunikations-Szenarien,” in VDI/VDE AUTOREG 2019, 2019, pp. 159–170. mla: Mertin, Sven, et al. “Proof-of-Concept Einer Komplexen Co-Simulationsumgebung Für Einen Fahrsimulator Zur Untersuchung von Car2X-Kommunikations-Szenarien.” VDI/VDE AUTOREG 2019, VDI Verlag Düsseldorf, 2019, pp. 159–70. short: 'S. Mertin, D. Buse, M. Franke, A. Trächtler, S. Gausemeier, F. Dressler, in: VDI/VDE AUTOREG 2019, VDI Verlag Düsseldorf, Mannheim, Deutschland, 2019, pp. 159–170.' date_created: 2021-08-09T05:21:43Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' language: - iso: eng page: 159-170 place: Mannheim, Deutschland publication: VDI/VDE AUTOREG 2019 publisher: VDI Verlag Düsseldorf series_title: 9. VDI/VDE-Fachtagung AUTOREG status: public title: Proof-of-Concept einer komplexen Co-Simulationsumgebung für einen Fahrsimulator zur Untersuchung von Car2X-Kommunikations-Szenarien type: conference user_id: '24876' year: '2019' ... --- _id: '22973' author: - first_name: Nico full_name: Rüddenklau, Nico id: '22359' last_name: Rüddenklau - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Rüddenklau N, Gausemeier S, Trächtler A. Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems. In: VDI/VDE AUTOREG 2019. 9. VDI/VDE-Fachtagung AUTOREG. VDI- Verlag, Düsseldorf; 2019.' apa: Rüddenklau, N., Gausemeier, S., & Trächtler, A. (2019). Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems. In VDI/VDE AUTOREG 2019. VDI- Verlag, Düsseldorf. bibtex: '@inbook{Rüddenklau_Gausemeier_Trächtler_2019, series={9. VDI/VDE-Fachtagung AUTOREG}, title={Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems}, booktitle={VDI/VDE AUTOREG 2019}, publisher={VDI- Verlag, Düsseldorf}, author={Rüddenklau, Nico and Gausemeier, Sandra and Trächtler, Ansgar}, year={2019}, collection={9. VDI/VDE-Fachtagung AUTOREG} }' chicago: Rüddenklau, Nico, Sandra Gausemeier, and Ansgar Trächtler. “Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems.” In VDI/VDE AUTOREG 2019. 9. VDI/VDE-Fachtagung AUTOREG. VDI- Verlag, Düsseldorf, 2019. ieee: N. Rüddenklau, S. Gausemeier, and A. Trächtler, “Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems,” in VDI/VDE AUTOREG 2019, VDI- Verlag, Düsseldorf, 2019. mla: Rüddenklau, Nico, et al. “Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems.” VDI/VDE AUTOREG 2019, VDI- Verlag, Düsseldorf, 2019. short: 'N. Rüddenklau, S. Gausemeier, A. Trächtler, in: VDI/VDE AUTOREG 2019, VDI- Verlag, Düsseldorf, 2019.' date_created: 2021-08-09T05:21:44Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' language: - iso: eng publication: VDI/VDE AUTOREG 2019 publisher: VDI- Verlag, Düsseldorf series_title: 9. VDI/VDE-Fachtagung AUTOREG status: public title: Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems type: book_chapter user_id: '24876' year: '2019' ... --- _id: '22974' author: - first_name: Georgi full_name: Nareyko, Georgi last_name: Nareyko - first_name: Thorsten full_name: Koch, Thorsten last_name: Koch - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Nareyko G, Koch T, Trächtler A. Model Predictive Control of an Active Roll Stabilization System. In: VDI/VDE Fachtagung AUTOREG. ; 2019.' apa: Nareyko, G., Koch, T., & Trächtler, A. (2019). Model Predictive Control of an Active Roll Stabilization System. In VDI/VDE Fachtagung AUTOREG. bibtex: '@inproceedings{Nareyko_Koch_Trächtler_2019, title={Model Predictive Control of an Active Roll Stabilization System}, booktitle={VDI/VDE Fachtagung AUTOREG}, author={Nareyko, Georgi and Koch, Thorsten and Trächtler, Ansgar}, year={2019} }' chicago: Nareyko, Georgi, Thorsten Koch, and Ansgar Trächtler. “Model Predictive Control of an Active Roll Stabilization System.” In VDI/VDE Fachtagung AUTOREG, 2019. ieee: G. Nareyko, T. Koch, and A. Trächtler, “Model Predictive Control of an Active Roll Stabilization System,” in VDI/VDE Fachtagung AUTOREG, 2019. mla: Nareyko, Georgi, et al. “Model Predictive Control of an Active Roll Stabilization System.” VDI/VDE Fachtagung AUTOREG, 2019. short: 'G. Nareyko, T. Koch, A. Trächtler, in: VDI/VDE Fachtagung AUTOREG, 2019.' date_created: 2021-08-09T05:21:45Z date_updated: 2022-01-06T06:55:44Z department: - _id: '153' language: - iso: eng publication: VDI/VDE Fachtagung AUTOREG status: public title: Model Predictive Control of an Active Roll Stabilization System type: conference user_id: '24876' year: '2019' ...