[{"year":"2025","corporate_editor":["DECHEMA"],"citation":{"mla":"Hofmann, Julia, et al. “Methodenentwicklung Zur Numerischen Auslegung von Klebverbindungen Mit Lackierten Fügeteilen.” <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, edited by DECHEMA, 2025.","short":"J. Hofmann, D. Teutenberg, G. Meschut, in: DECHEMA (Ed.), 25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2025.","bibtex":"@inproceedings{Hofmann_Teutenberg_Meschut_2025, title={Methodenentwicklung zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen}, booktitle={25. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hofmann, Julia and Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA}, year={2025} }","apa":"Hofmann, J., Teutenberg, D., &#38; Meschut, G. (2025). Methodenentwicklung zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen. In DECHEMA (Ed.), <i>25. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>.","ama":"Hofmann J, Teutenberg D, Meschut G. Methodenentwicklung zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen. In: DECHEMA, ed. <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. ; 2025.","chicago":"Hofmann, Julia, Dominik Teutenberg, and Gerson Meschut. “Methodenentwicklung Zur Numerischen Auslegung von Klebverbindungen Mit Lackierten Fügeteilen.” In <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, edited by DECHEMA, 2025.","ieee":"J. Hofmann, D. Teutenberg, and G. Meschut, “Methodenentwicklung zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen,” in <i>25. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, Köln, 2025."},"title":"Methodenentwicklung zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen","conference":{"location":"Köln","end_date":"2025-02-19","start_date":"2025-02-18","name":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik"},"date_updated":"2026-03-03T08:55:23Z","author":[{"id":"104312","full_name":"Hofmann, Julia","last_name":"Hofmann","first_name":"Julia"},{"first_name":"Dominik","full_name":"Teutenberg, Dominik","id":"537","last_name":"Teutenberg"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056"}],"date_created":"2026-03-03T08:26:48Z","status":"public","publication":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik","type":"conference_abstract","language":[{"iso":"eng"}],"_id":"64812","department":[{"_id":"157"}],"user_id":"104312"},{"oa":"1","date_updated":"2025-02-24T07:30:23Z","volume":137,"author":[{"first_name":"Keke","orcid":"0000-0001-9201-9304","last_name":"Yang","id":"65085","full_name":"Yang, Keke"},{"full_name":"Wang, Zhuoqun","last_name":"Wang","first_name":"Zhuoqun"},{"id":"60398","full_name":"Haak, Viktor","last_name":"Haak","first_name":"Viktor"},{"last_name":"Olfert","id":"5974","full_name":"Olfert, Viktoria","first_name":"Viktoria"},{"first_name":"Bassel","last_name":"El-Sari","full_name":"El-Sari, Bassel"},{"full_name":"Hein, David","id":"7728","last_name":"Hein","first_name":"David"},{"last_name":"Biegler","full_name":"Biegler, Max","first_name":"Max"},{"last_name":"Rethmeier","full_name":"Rethmeier, Michael","first_name":"Michael"},{"first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246"}],"doi":"10.1016/j.jmapro.2025.02.009","main_file_link":[{"open_access":"1"}],"publication_identifier":{"issn":["1526-6125"]},"has_accepted_license":"1","publication_status":"published","intvolume":"       137","page":"306-319","citation":{"ieee":"K. Yang <i>et al.</i>, “A novel welding schedule for expanding the expulsion-free process window in resistance spot welding of dissimilar joints with ultra-high strength steel,” <i>Journal of Manufacturing Processes</i>, vol. 137, pp. 306–319, 2025, doi: <a href=\"https://doi.org/10.1016/j.jmapro.2025.02.009\">10.1016/j.jmapro.2025.02.009</a>.","chicago":"Yang, Keke, Zhuoqun Wang, Viktor Haak, Viktoria Olfert, Bassel El-Sari, David Hein, Max Biegler, Michael Rethmeier, and Gerson Meschut. “A Novel Welding Schedule for Expanding the Expulsion-Free Process Window in Resistance Spot Welding of Dissimilar Joints with Ultra-High Strength Steel.” <i>Journal of Manufacturing Processes</i> 137 (2025): 306–19. <a href=\"https://doi.org/10.1016/j.jmapro.2025.02.009\">https://doi.org/10.1016/j.jmapro.2025.02.009</a>.","ama":"Yang K, Wang Z, Haak V, et al. A novel welding schedule for expanding the expulsion-free process window in resistance spot welding of dissimilar joints with ultra-high strength steel. <i>Journal of Manufacturing Processes</i>. 2025;137:306-319. doi:<a href=\"https://doi.org/10.1016/j.jmapro.2025.02.009\">10.1016/j.jmapro.2025.02.009</a>","apa":"Yang, K., Wang, Z., Haak, V., Olfert, V., El-Sari, B., Hein, D., Biegler, M., Rethmeier, M., &#38; Meschut, G. (2025). A novel welding schedule for expanding the expulsion-free process window in resistance spot welding of dissimilar joints with ultra-high strength steel. <i>Journal of Manufacturing Processes</i>, <i>137</i>, 306–319. <a href=\"https://doi.org/10.1016/j.jmapro.2025.02.009\">https://doi.org/10.1016/j.jmapro.2025.02.009</a>","bibtex":"@article{Yang_Wang_Haak_Olfert_El-Sari_Hein_Biegler_Rethmeier_Meschut_2025, title={A novel welding schedule for expanding the expulsion-free process window in resistance spot welding of dissimilar joints with ultra-high strength steel}, volume={137}, DOI={<a href=\"https://doi.org/10.1016/j.jmapro.2025.02.009\">10.1016/j.jmapro.2025.02.009</a>}, journal={Journal of Manufacturing Processes}, publisher={Elsevier BV}, author={Yang, Keke and Wang, Zhuoqun and Haak, Viktor and Olfert, Viktoria and El-Sari, Bassel and Hein, David and Biegler, Max and Rethmeier, Michael and Meschut, Gerson}, year={2025}, pages={306–319} }","short":"K. Yang, Z. Wang, V. Haak, V. Olfert, B. El-Sari, D. Hein, M. Biegler, M. Rethmeier, G. Meschut, Journal of Manufacturing Processes 137 (2025) 306–319.","mla":"Yang, Keke, et al. “A Novel Welding Schedule for Expanding the Expulsion-Free Process Window in Resistance Spot Welding of Dissimilar Joints with Ultra-High Strength Steel.” <i>Journal of Manufacturing Processes</i>, vol. 137, Elsevier BV, 2025, pp. 306–19, doi:<a href=\"https://doi.org/10.1016/j.jmapro.2025.02.009\">10.1016/j.jmapro.2025.02.009</a>."},"_id":"58535","department":[{"_id":"157"}],"user_id":"65085","file_date_updated":"2025-02-07T10:09:17Z","type":"journal_article","status":"public","publisher":"Elsevier BV","date_created":"2025-02-07T10:08:08Z","title":"A novel welding schedule for expanding the expulsion-free process window in resistance spot welding of dissimilar joints with ultra-high strength steel","quality_controlled":"1","year":"2025","ddc":["670"],"language":[{"iso":"eng"}],"publication":"Journal of Manufacturing Processes","license":"https://creativecommons.org/licenses/by-sa/4.0/","file":[{"file_size":3747516,"file_name":"KYA_VÖ6.pdf","access_level":"closed","file_id":"58536","date_updated":"2025-02-07T10:09:17Z","date_created":"2025-02-07T10:09:17Z","creator":"kekeyang","success":1,"relation":"main_file","content_type":"application/pdf"}]},{"publication":"The Journal of Materials: Design and Applications, Part L","abstract":[{"text":"One of the most important strategies for reducing CO2 emissions in the mobility sector is lightweight construction. In particular, the car body offers several opportunities for weight reduction. Multi-material designs are increasingly being applied to select the most suitable material for the respective load and ultimately achieve synergy effects. For example, aluminium castings are used at the nodes of a spaceframe body. Subsequently, these are joined with profiles to form the bodyshell. To join different materials mechanical joining techniques, such as semi-tubular self-piercing riveting, are deployed. According to the current state of the art, cracks occur in the aluminium castings during the mechanical joining process as a result of the high degree of deformation. Although the aluminium casting alloys of the AlSi-system exhibit low ductility, these alloys reveal excellent castability. In particular, the ability to cast thin structural parts is enabled by the low liquidus point of the near eutectic aluminium casting alloys.\r\nThis study addresses the mechanical joining properties of the near eutectic aluminium casting alloy AlSi12, depending on different microstructures. These are achieved by annealing processes and modifying agents. Through an adapted heat treatment, the previously lamellar morphology can be transformed into a globular morphology, which leads to increased ductility and prevents the formation of cracks during the self-piercing riveting (SPR). The joinability is investigated using different die geometries, whereas the joint formation is analysed regarding crack initiation. To evaluate the increased ductility, microstructural and mechanical tests are performed and finally, a microstructure-joinability correlation is established.","lang":"eng"}],"keyword":["aluminium","casting","microstructure","joinability","self-piercing riveting"],"language":[{"iso":"eng"}],"quality_controlled":"1","year":"2025","publisher":"Sage Publications","date_created":"2025-02-24T10:25:31Z","title":"Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12","type":"journal_article","status":"public","_id":"58807","project":[{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"department":[{"_id":"43"},{"_id":"158"},{"_id":"157"},{"_id":"9"},{"_id":"321"}],"user_id":"32340","article_type":"original","has_accepted_license":"1","publication_status":"published","citation":{"ama":"Neuser M, Holtkamp PK, Hoyer K-P, et al. Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12. <i>The Journal of Materials: Design and Applications, Part L</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1177/14644207251319922\">10.1177/14644207251319922</a>","chicago":"Neuser, Moritz, Pia Katharina Holtkamp, Kay-Peter Hoyer, Fabian Kappe, Safak Yildiz, Mathias Bobbert, Gerson Meschut, and Mirko Schaper. “Mechanical Properties and Joinability of the Near-Eutectic Aluminium Casting Alloy AlSi12.” <i>The Journal of Materials: Design and Applications, Part L</i>, 2025. <a href=\"https://doi.org/10.1177/14644207251319922\">https://doi.org/10.1177/14644207251319922</a>.","ieee":"M. Neuser <i>et al.</i>, “Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12,” <i>The Journal of Materials: Design and Applications, Part L</i>, 2025, doi: <a href=\"https://doi.org/10.1177/14644207251319922\">10.1177/14644207251319922</a>.","apa":"Neuser, M., Holtkamp, P. K., Hoyer, K.-P., Kappe, F., Yildiz, S., Bobbert, M., Meschut, G., &#38; Schaper, M. (2025). Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12. <i>The Journal of Materials: Design and Applications, Part L</i>. 5th International Conference on Materials Design and Applications 2024, Porto, Portugal. <a href=\"https://doi.org/10.1177/14644207251319922\">https://doi.org/10.1177/14644207251319922</a>","short":"M. Neuser, P.K. Holtkamp, K.-P. Hoyer, F. Kappe, S. Yildiz, M. Bobbert, G. Meschut, M. Schaper, The Journal of Materials: Design and Applications, Part L (2025).","bibtex":"@article{Neuser_Holtkamp_Hoyer_Kappe_Yildiz_Bobbert_Meschut_Schaper_2025, title={Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12}, DOI={<a href=\"https://doi.org/10.1177/14644207251319922\">10.1177/14644207251319922</a>}, journal={The Journal of Materials: Design and Applications, Part L}, publisher={Sage Publications}, author={Neuser, Moritz and Holtkamp, Pia Katharina and Hoyer, Kay-Peter and Kappe, Fabian and Yildiz, Safak and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko}, year={2025} }","mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of the Near-Eutectic Aluminium Casting Alloy AlSi12.” <i>The Journal of Materials: Design and Applications, Part L</i>, Sage Publications, 2025, doi:<a href=\"https://doi.org/10.1177/14644207251319922\">10.1177/14644207251319922</a>."},"date_updated":"2025-02-24T12:25:04Z","author":[{"first_name":"Moritz","full_name":"Neuser, Moritz","id":"32340","last_name":"Neuser"},{"first_name":"Pia Katharina","id":"44935","full_name":"Holtkamp, Pia Katharina","last_name":"Holtkamp"},{"first_name":"Kay-Peter","id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"},{"first_name":"Fabian","id":"66459","full_name":"Kappe, Fabian","last_name":"Kappe"},{"first_name":"Safak","last_name":"Yildiz","full_name":"Yildiz, Safak"},{"first_name":"Mathias","last_name":"Bobbert","full_name":"Bobbert, Mathias","id":"7850"},{"last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"}],"doi":"10.1177/14644207251319922","conference":{"start_date":"2024-07-04","name":"5th International Conference on Materials Design and Applications 2024","location":"Porto, Portugal","end_date":"2024-07-05"}},{"user_id":"65085","department":[{"_id":"157"}],"_id":"58971","article_type":"original","type":"journal_article","status":"public","author":[{"first_name":"Viktor","last_name":"Haak","id":"60398","full_name":"Haak, Viktor"},{"last_name":"Yang","orcid":"0000-0001-9201-9304","full_name":"Yang, Keke","id":"65085","first_name":"Keke"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson"}],"volume":3,"date_updated":"2025-03-12T09:41:39Z","main_file_link":[{"url":"https://www.schweissenundschneiden.de/artikel/einfluss-von-schweissparametern-und-montageverfahren-auf-die-elektrische-kontaktguete-von-aluminium-massebolzen"}],"doi":"10.53192/SUS20250336","publication_status":"published","citation":{"apa":"Haak, V., Yang, K., &#38; Meschut, G. (2025). Einfluss von Schweißparametern und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen. <i>Schweißen und Schneiden</i>, <i>3</i>. <a href=\"https://doi.org/10.53192/SUS20250336\">https://doi.org/10.53192/SUS20250336</a>","bibtex":"@article{Haak_Yang_Meschut_2025, title={Einfluss von Schweißparametern und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen}, volume={3}, DOI={<a href=\"https://doi.org/10.53192/SUS20250336\">10.53192/SUS20250336</a>}, journal={Schweißen und Schneiden}, publisher={DVS-Media}, author={Haak, Viktor and Yang, Keke and Meschut, Gerson}, year={2025} }","short":"V. Haak, K. Yang, G. Meschut, Schweißen und Schneiden 3 (2025).","mla":"Haak, Viktor, et al. “Einfluss von Schweißparametern und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen.” <i>Schweißen und Schneiden</i>, vol. 3, DVS-Media, 2025, doi:<a href=\"https://doi.org/10.53192/SUS20250336\">10.53192/SUS20250336</a>.","ieee":"V. Haak, K. Yang, and G. Meschut, “Einfluss von Schweißparametern und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen,” <i>Schweißen und Schneiden</i>, vol. 3, 2025, doi: <a href=\"https://doi.org/10.53192/SUS20250336\">10.53192/SUS20250336</a>.","chicago":"Haak, Viktor, Keke Yang, and Gerson Meschut. “Einfluss von Schweißparametern und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen.” <i>Schweißen und Schneiden</i> 3 (2025). <a href=\"https://doi.org/10.53192/SUS20250336\">https://doi.org/10.53192/SUS20250336</a>.","ama":"Haak V, Yang K, Meschut G. Einfluss von Schweißparametern und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen. <i>Schweißen und Schneiden</i>. 2025;3. doi:<a href=\"https://doi.org/10.53192/SUS20250336\">10.53192/SUS20250336</a>"},"intvolume":"         3","language":[{"iso":"ger"}],"publication":"Schweißen und Schneiden","abstract":[{"text":"Ein wichtiger Bestandteil jeder Fahrzeugkarosserie sind Massebolzen, die zur Herstellung der elektrischen Schnittstelle zwischen der leitfähigen Karosserie und dem Bordnetz dienen. Eine zuverlässige Signal- und Leistungsübertragung erfor-dert minimale Übergangswiderstände an den elektrischen Anschlusspunkten des Massebolzensystems und muss ver-schiedenen Betriebs- und Umweltbedingungen über die gesamte Lebensdauer standhalten. Der Übergangswiderstand wird von mehreren Faktoren beeinflusst (z. B. Verbindungsgeometrie, Kontaktkraft, Temperatur, Werkstoff) und erhöht sich im Laufe der Betriebszeit infolge unterschiedlicher Alterungsmechanismen. Dieser Beitrag befasst sich mit der elektrischen Charakterisierung von Massebolzen aus AlMg5 mit einer ZnNi-beschichteten Stahl-Hutmutter auf einem AlMg3-Blech. Es werden ausgewählte fertigungs-, montage- und betriebsbedingte Einflussgrößen auf den elektrischen Verbindungs-widerstand analysiert. Als wirtschaftliche und etablierte Fügetechnologie kommt das Lichtbogenbolzenschweißen mit Hubzündung zum Einsatz. Zur Herstellung qualitativ hochwertiger Schweißverbindungen wird mittels einer statistischen Versuchsplanung ein geeigneter Referenzparametersatz ermittelt. Weiterhin wird der montagebedingte Einfluss anhand des Mutter-Anziehmoments bei der Kabelschuhmontage auf den elektrischen Verbindungswiderstand untersucht. Zusätzlich werden die Strombelastbarkeit und der maximal zulässige Betriebsbereich des Massebolzensystems ermittelt.","lang":"ger"}],"date_created":"2025-03-12T09:41:06Z","publisher":"DVS-Media","title":"Einfluss von Schweißparametern und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen","quality_controlled":"1","year":"2025"},{"keyword":["Joining","Self-Piercing Riveting","Sheet Metal"],"language":[{"iso":"eng"}],"abstract":[{"text":"The constantly increasing demand for climate protection and resource conservation requires innovative and versatile joining processes that improve adaptability to the joining task and robustness to enable flexible manufacturing on a production line. Therefore, the versatile SPR (V-SPR) and tumbling SPR (T-SPR) were developed. Using the example of a mixed material combination HCT590X+Z (t0 = 1.0 mm) / EN AW-6014 T4 (t0 = 2.0 mm), these processes were examined and compared with regard to the binding mechanisms form closure and force closure using micrographs, non-destructive resistance measurements and destructive torsion tests. For this purpose, a new sample geometry was defined, and the methods were adapted to the SPR process variants.</jats:p>","lang":"eng"}],"publication":"Materials Research Proceedings","title":"Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting","publisher":"Materials Research Forum LLC","date_created":"2025-06-20T10:13:22Z","year":"2025","quality_controlled":"1","extern":"1","_id":"60290","project":[{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A04: TRR 285 - Subproject A04","_id":"138"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"department":[{"_id":"630"},{"_id":"43"},{"_id":"157"}],"series_title":"Sheet Metal 2025","user_id":"44935","editor":[{"first_name":"Gerson","last_name":"Meschut","full_name":"Meschut, Gerson"},{"first_name":"Mathias","full_name":"Bobbert, Mathias","last_name":"Bobbert"},{"full_name":"Duflou, Joost","last_name":"Duflou","first_name":"Joost"},{"last_name":"Fratini","full_name":"Fratini, Livan","first_name":"Livan"},{"first_name":"Hinnerk","full_name":"Hagenah, Hinnerk","last_name":"Hagenah"},{"first_name":"Paulo A. F.","last_name":"Martins","full_name":"Martins, Paulo A. F."},{"first_name":"Marion","full_name":"Merklein, Marion","last_name":"Merklein"},{"full_name":"Micari, Fabrizio","last_name":"Micari","first_name":"Fabrizio"}],"status":"public","type":"conference","doi":"10.21741/9781644903551-13","conference":{"location":"Paderborn","end_date":"2025-04-03","start_date":"2025-04-01","name":"21st International Conference on Sheet Metal"},"date_updated":"2025-06-27T08:19:26Z","volume":52,"author":[{"last_name":"Lüder","full_name":"Lüder, Stephan","first_name":"Stephan"},{"id":"44935","full_name":"Holtkamp, Pia Katharina","last_name":"Holtkamp","first_name":"Pia Katharina"},{"full_name":"Wituschek, Simon","last_name":"Wituschek","first_name":"Simon"},{"full_name":"Bobbert, Mathias","id":"7850","last_name":"Bobbert","first_name":"Mathias"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"},{"first_name":"Michael","full_name":"Lechner, Michael","last_name":"Lechner"},{"full_name":"Schmale, Hans Christian","last_name":"Schmale","first_name":"Hans Christian"}],"place":"Millersville","intvolume":"        52","page":"101 - 108","citation":{"apa":"Lüder, S., Holtkamp, P. K., Wituschek, S., Bobbert, M., Meschut, G., Lechner, M., &#38; Schmale, H. C. (2025). Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting. In G. Meschut, M. Bobbert, J. Duflou, L. Fratini, H. Hagenah, P. A. F. Martins, M. Merklein, &#38; F. Micari (Eds.), <i>Materials Research Proceedings</i> (Vol. 52, pp. 101–108). Materials Research Forum LLC. <a href=\"https://doi.org/10.21741/9781644903551-13\">https://doi.org/10.21741/9781644903551-13</a>","bibtex":"@inproceedings{Lüder_Holtkamp_Wituschek_Bobbert_Meschut_Lechner_Schmale_2025, place={Millersville}, series={Sheet Metal 2025}, title={Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-13\">10.21741/9781644903551-13</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Lüder, Stephan and Holtkamp, Pia Katharina and Wituschek, Simon and Bobbert, Mathias and Meschut, Gerson and Lechner, Michael and Schmale, Hans Christian}, editor={Meschut, Gerson and Bobbert, Mathias and Duflou, Joost and Fratini, Livan and Hagenah, Hinnerk and Martins, Paulo A. F. and Merklein, Marion and Micari, Fabrizio}, year={2025}, pages={101–108}, collection={Sheet Metal 2025} }","short":"S. Lüder, P.K. Holtkamp, S. Wituschek, M. Bobbert, G. Meschut, M. Lechner, H.C. Schmale, in: G. Meschut, M. Bobbert, J. Duflou, L. Fratini, H. Hagenah, P.A.F. Martins, M. Merklein, F. Micari (Eds.), Materials Research Proceedings, Materials Research Forum LLC, Millersville, 2025, pp. 101–108.","mla":"Lüder, Stephan, et al. “Analysis of the Binding Mechanisms Depending on Versatile Process Variants of Self-Piercing Riveting.” <i>Materials Research Proceedings</i>, edited by Gerson Meschut et al., vol. 52, Materials Research Forum LLC, 2025, pp. 101–08, doi:<a href=\"https://doi.org/10.21741/9781644903551-13\">10.21741/9781644903551-13</a>.","ama":"Lüder S, Holtkamp PK, Wituschek S, et al. Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting. In: Meschut G, Bobbert M, Duflou J, et al., eds. <i>Materials Research Proceedings</i>. Vol 52. Sheet Metal 2025. Materials Research Forum LLC; 2025:101-108. doi:<a href=\"https://doi.org/10.21741/9781644903551-13\">10.21741/9781644903551-13</a>","ieee":"S. Lüder <i>et al.</i>, “Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting,” in <i>Materials Research Proceedings</i>, Paderborn, 2025, vol. 52, pp. 101–108, doi: <a href=\"https://doi.org/10.21741/9781644903551-13\">10.21741/9781644903551-13</a>.","chicago":"Lüder, Stephan, Pia Katharina Holtkamp, Simon Wituschek, Mathias Bobbert, Gerson Meschut, Michael Lechner, and Hans Christian Schmale. “Analysis of the Binding Mechanisms Depending on Versatile Process Variants of Self-Piercing Riveting.” In <i>Materials Research Proceedings</i>, edited by Gerson Meschut, Mathias Bobbert, Joost Duflou, Livan Fratini, Hinnerk Hagenah, Paulo A. F. Martins, Marion Merklein, and Fabrizio Micari, 52:101–8. Sheet Metal 2025. Millersville: Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-13\">https://doi.org/10.21741/9781644903551-13</a>."},"publication_identifier":{"issn":["2474-395X"]},"publication_status":"published"},{"status":"public","abstract":[{"text":"Conventional mechanical joining processes are typically rigid in their tool systems and can only react to changing process and disturbance variables to a limited extent. At the same time, various industries are increasingly trending towards multi-material systems consisting of parts with varying geometric and mechanical properties. Due to the varying properties, rigid mechanical joining processes require sampling procedures and periodic changes of tool components or auxiliary joining parts. Consequently, research is focusing on versatile mechanical joining processes that allow increased control by modifying the process parameters. Two processes based on self-piercing riveting can achieve a significant increase in process influence possibilities through a multi-linear actuator as versatile self-piercing riveting (V-SPR) and a tumbling superimposed actuator as tumbling self-piercing riveting (T-SPR). Initial research into V-SPR has shown that this process can be used to achieve a higher variation in overall package thickness by adapting the rivet geometry and using multiple linear actuators. The T-SPR process also enables increased material flow control by means of targeted compression of the rivet using the tumbling actuator, thereby extending the range of joints that can be manufactured. Based on these two processes, a combination of the two mechanisms of action is to be developed.","lang":"eng"}],"publication":"MATEC Web of Conferences","type":"journal_article","language":[{"iso":"eng"}],"article_number":"01069","department":[{"_id":"43"},{"_id":"157"}],"user_id":"44935","_id":"60441","project":[{"name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"intvolume":"       408","citation":{"short":"P.K. Holtkamp, S. Wituschek, M. Lechner, G. Meschut, MATEC Web of Conferences 408 (2025).","bibtex":"@article{Holtkamp_Wituschek_Lechner_Meschut_2025, title={Integration of multiple-linear and tumbling kinematics into self-piercing riveting}, volume={408}, DOI={<a href=\"https://doi.org/10.1051/matecconf/202540801069\">10.1051/matecconf/202540801069</a>}, number={01069}, journal={MATEC Web of Conferences}, publisher={EDP Sciences}, author={Holtkamp, Pia Katharina and Wituschek, Simon and Lechner, Michael and Meschut, Gerson}, year={2025} }","mla":"Holtkamp, Pia Katharina, et al. “Integration of Multiple-Linear and Tumbling Kinematics into Self-Piercing Riveting.” <i>MATEC Web of Conferences</i>, vol. 408, 01069, EDP Sciences, 2025, doi:<a href=\"https://doi.org/10.1051/matecconf/202540801069\">10.1051/matecconf/202540801069</a>.","apa":"Holtkamp, P. K., Wituschek, S., Lechner, M., &#38; Meschut, G. (2025). Integration of multiple-linear and tumbling kinematics into self-piercing riveting. <i>MATEC Web of Conferences</i>, <i>408</i>, Article 01069. <a href=\"https://doi.org/10.1051/matecconf/202540801069\">https://doi.org/10.1051/matecconf/202540801069</a>","chicago":"Holtkamp, Pia Katharina, Simon Wituschek, Michael Lechner, and Gerson Meschut. “Integration of Multiple-Linear and Tumbling Kinematics into Self-Piercing Riveting.” <i>MATEC Web of Conferences</i> 408 (2025). <a href=\"https://doi.org/10.1051/matecconf/202540801069\">https://doi.org/10.1051/matecconf/202540801069</a>.","ieee":"P. K. Holtkamp, S. Wituschek, M. Lechner, and G. Meschut, “Integration of multiple-linear and tumbling kinematics into self-piercing riveting,” <i>MATEC Web of Conferences</i>, vol. 408, Art. no. 01069, 2025, doi: <a href=\"https://doi.org/10.1051/matecconf/202540801069\">10.1051/matecconf/202540801069</a>.","ama":"Holtkamp PK, Wituschek S, Lechner M, Meschut G. Integration of multiple-linear and tumbling kinematics into self-piercing riveting. <i>MATEC Web of Conferences</i>. 2025;408. doi:<a href=\"https://doi.org/10.1051/matecconf/202540801069\">10.1051/matecconf/202540801069</a>"},"year":"2025","publication_identifier":{"issn":["2261-236X"]},"quality_controlled":"1","publication_status":"published","doi":"10.1051/matecconf/202540801069","title":"Integration of multiple-linear and tumbling kinematics into self-piercing riveting","volume":408,"date_created":"2025-06-27T08:27:42Z","author":[{"first_name":"Pia Katharina","last_name":"Holtkamp","full_name":"Holtkamp, Pia Katharina","id":"44935"},{"first_name":"Simon","full_name":"Wituschek, Simon","id":"83423","last_name":"Wituschek"},{"last_name":"Lechner","full_name":"Lechner, Michael","first_name":"Michael"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","id":"32056","full_name":"Meschut, Gerson"}],"date_updated":"2025-06-27T08:34:46Z","publisher":"EDP Sciences"},{"status":"public","abstract":[{"text":"Abstract. Mechanical joints are traditionally analyzed through destructive micrograph analysis, which may compromise internal geometry and morphology, as evidenced by radial cracks in semi-tubular self-pierce riveting. In contrast, industrial X-ray computed tomography (XCT) offers a non-destructive method for component diagnosis, providing volumetric insights without damaging the sample and enabling dimensional measurement. The DFG-funded Collaborative Research Center TRR 285 is exploring XCT's application in assessing mechanical joinability across various joining processes and materials, particularly in multi-material systems like steel-aluminum joints. XCT faces challenges in accurately capturing multi-material compositions, leading to artifacts that complicate interface detection. This research aims to validate XCT for joint investigations, yielding quantitative characteristics that surpass those from traditional micrograph analysis.","lang":"eng"}],"type":"conference","publication":"Materials Research Proceedings","language":[{"iso":"eng"}],"user_id":"44935","department":[{"_id":"43"},{"_id":"157"}],"project":[{"_id":"130","name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","grant_number":"418701707"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"},{"name":"TRR 285 – C03: TRR 285 - Subproject C03","_id":"147"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"},{"name":"TRR 285 – C05: TRR 285 - Subproject C05","_id":"149"}],"_id":"60439","citation":{"apa":"Lechner, M., Borgert, T., Busch, M., Harms, A., Holtkamp, P. K., Römisch, D., Wituschek, S., &#38; Kappe, F. (2025). Non-destructive testing in versatile joining processes. <i>Materials Research Proceedings</i>, <i>52</i>. <a href=\"https://doi.org/10.21741/9781644903551-12\">https://doi.org/10.21741/9781644903551-12</a>","ama":"Lechner M, Borgert T, Busch M, et al. Non-destructive testing in versatile joining processes. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903551-12\">10.21741/9781644903551-12</a>","short":"M. Lechner, T. Borgert, M. Busch, A. Harms, P.K. Holtkamp, D. Römisch, S. Wituschek, F. Kappe, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","bibtex":"@inproceedings{Lechner_Borgert_Busch_Harms_Holtkamp_Römisch_Wituschek_Kappe_2025, title={Non-destructive testing in versatile joining processes}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-12\">10.21741/9781644903551-12</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Lechner, M. and Borgert, Thomas and Busch, Matthias and Harms, A. and Holtkamp, Pia Katharina and Römisch, D. and Wituschek, Simon and Kappe, Fabian}, year={2025} }","mla":"Lechner, M., et al. “Non-Destructive Testing in Versatile Joining Processes.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903551-12\">10.21741/9781644903551-12</a>.","chicago":"Lechner, M., Thomas Borgert, Matthias Busch, A. Harms, Pia Katharina Holtkamp, D. Römisch, Simon Wituschek, and Fabian Kappe. “Non-Destructive Testing in Versatile Joining Processes.” In <i>Materials Research Proceedings</i>, Vol. 52. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-12\">https://doi.org/10.21741/9781644903551-12</a>.","ieee":"M. Lechner <i>et al.</i>, “Non-destructive testing in versatile joining processes,” in <i>Materials Research Proceedings</i>, 2025, vol. 52, doi: <a href=\"https://doi.org/10.21741/9781644903551-12\">10.21741/9781644903551-12</a>."},"intvolume":"        52","year":"2025","publication_status":"published","publication_identifier":{"issn":["2474-395X"]},"quality_controlled":"1","doi":"10.21741/9781644903551-12","title":"Non-destructive testing in versatile joining processes","author":[{"first_name":"M.","full_name":"Lechner, M.","last_name":"Lechner"},{"last_name":"Borgert","id":"83141","full_name":"Borgert, Thomas","first_name":"Thomas"},{"first_name":"Matthias","orcid":"https://orcid.org/0000-0002-8456-3374","last_name":"Busch","id":"83421","full_name":"Busch, Matthias"},{"first_name":"A.","last_name":"Harms","full_name":"Harms, A."},{"last_name":"Holtkamp","id":"44935","full_name":"Holtkamp, Pia Katharina","first_name":"Pia Katharina"},{"first_name":"D.","last_name":"Römisch","full_name":"Römisch, D."},{"first_name":"Simon","id":"83423","full_name":"Wituschek, Simon","last_name":"Wituschek"},{"first_name":"Fabian","id":"66459","full_name":"Kappe, Fabian","last_name":"Kappe"}],"date_created":"2025-06-27T07:56:32Z","volume":52,"publisher":"Materials Research Forum LLC","date_updated":"2025-06-27T08:17:00Z"},{"author":[{"full_name":"Biegler, Max","last_name":"Biegler","first_name":"Max"},{"id":"65085","full_name":"Yang, Keke","last_name":"Yang","orcid":"0000-0001-9201-9304","first_name":"Keke"},{"first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056","orcid":"0000-0002-2763-1246","last_name":"Meschut"},{"full_name":"Rethmeier, Michael","last_name":"Rethmeier","first_name":"Michael"}],"date_updated":"2025-07-14T08:38:19Z","oa":"1","doi":"10.1177/13621718251340452","main_file_link":[{"open_access":"1"}],"related_material":{"link":[{"url":"10.1177/13621718251340452","relation":"confirmation"}]},"has_accepted_license":"1","publication_identifier":{"issn":["1362-1718","1743-2936"]},"publication_status":"published","citation":{"ama":"Biegler M, Yang K, Meschut G, Rethmeier M. Occurrence and avoidance of liquid metal embrittlement in resistance spot welding of springback-afflicted deep-drawn components. <i>Science and Technology of Welding and Joining</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1177/13621718251340452\">10.1177/13621718251340452</a>","chicago":"Biegler, Max, Keke Yang, Gerson Meschut, and Michael Rethmeier. “Occurrence and Avoidance of Liquid Metal Embrittlement in Resistance Spot Welding of Springback-Afflicted Deep-Drawn Components.” <i>Science and Technology of Welding and Joining</i>, 2025. <a href=\"https://doi.org/10.1177/13621718251340452\">https://doi.org/10.1177/13621718251340452</a>.","ieee":"M. Biegler, K. Yang, G. Meschut, and M. Rethmeier, “Occurrence and avoidance of liquid metal embrittlement in resistance spot welding of springback-afflicted deep-drawn components,” <i>Science and Technology of Welding and Joining</i>, 2025, doi: <a href=\"https://doi.org/10.1177/13621718251340452\">10.1177/13621718251340452</a>.","apa":"Biegler, M., Yang, K., Meschut, G., &#38; Rethmeier, M. (2025). Occurrence and avoidance of liquid metal embrittlement in resistance spot welding of springback-afflicted deep-drawn components. <i>Science and Technology of Welding and Joining</i>. <a href=\"https://doi.org/10.1177/13621718251340452\">https://doi.org/10.1177/13621718251340452</a>","short":"M. Biegler, K. Yang, G. Meschut, M. Rethmeier, Science and Technology of Welding and Joining (2025).","mla":"Biegler, Max, et al. “Occurrence and Avoidance of Liquid Metal Embrittlement in Resistance Spot Welding of Springback-Afflicted Deep-Drawn Components.” <i>Science and Technology of Welding and Joining</i>, SAGE Publications, 2025, doi:<a href=\"https://doi.org/10.1177/13621718251340452\">10.1177/13621718251340452</a>.","bibtex":"@article{Biegler_Yang_Meschut_Rethmeier_2025, title={Occurrence and avoidance of liquid metal embrittlement in resistance spot welding of springback-afflicted deep-drawn components}, DOI={<a href=\"https://doi.org/10.1177/13621718251340452\">10.1177/13621718251340452</a>}, journal={Science and Technology of Welding and Joining}, publisher={SAGE Publications}, author={Biegler, Max and Yang, Keke and Meschut, Gerson and Rethmeier, Michael}, year={2025} }"},"department":[{"_id":"157"}],"user_id":"65085","_id":"60592","file_date_updated":"2025-07-14T08:37:40Z","article_type":"original","type":"journal_article","status":"public","date_created":"2025-07-12T22:44:20Z","publisher":"SAGE Publications","title":"Occurrence and avoidance of liquid metal embrittlement in resistance spot welding of springback-afflicted deep-drawn components","quality_controlled":"1","year":"2025","language":[{"iso":"eng"}],"ddc":["620"],"publication":"Science and Technology of Welding and Joining","file":[{"date_created":"2025-07-14T08:37:40Z","creator":"kekeyang","date_updated":"2025-07-14T08:37:40Z","access_level":"closed","file_name":"KYA_VÖ7.pdf","file_id":"60599","file_size":4534008,"content_type":"application/pdf","relation":"main_file","success":1}],"abstract":[{"text":"<jats:p>This study investigates the occurrence and mitigation of liquid metal embrittlement occurring during resistance spot welding in deep-drawn automotive components, specifically focusing on an S-Rail made from advanced high-strength steel. A simulation-based liquid metal embrittlement risk criterion based on local major component stresses was established and used to quantify and compare liquid metal embrittlement risks between different tests. Experimental and numerical analyses were conducted, revealing that springback significantly impacts liquid metal embrittlement formation. Adjustments in electrode geometry and hold time post-welding were found to mitigate liquid metal embrittlement risks. The effects of stack-up configuration and related parameter settings on liquid metal embrittlement occurrence were identified and liquid metal embrittlement was effectively prevented across both stack-up configurations. These findings advance the understanding of liquid metal embrittlement mechanisms and provide practical approaches to enhance the spot weld quality in AHSS-based body-in-whites.</jats:p>","lang":"eng"}]},{"publication":"Journal of Manufacturing Processes","file":[{"content_type":"application/pdf","relation":"main_file","date_updated":"2025-10-06T16:11:21Z","date_created":"2025-10-06T16:11:21Z","creator":"kekeyang","file_size":7973182,"file_id":"61527","access_level":"open_access","file_name":"1-s2.0-S152661252501059X-main.pdf"}],"ddc":["620"],"language":[{"iso":"eng"}],"quality_controlled":"1","year":"2025","publisher":"Elsevier","date_created":"2025-10-06T16:11:28Z","title":"Failure behavior prediction for resistance spot-welded three-layered dissimilar joints with advanced high-strength steel","type":"journal_article","status":"public","_id":"61526","user_id":"65085","department":[{"_id":"157"}],"file_date_updated":"2025-10-06T16:11:21Z","publication_status":"published","publication_identifier":{"unknown":["1526-6125"]},"has_accepted_license":"1","citation":{"mla":"Olfert, Viktoria, et al. “Failure Behavior Prediction for Resistance Spot-Welded Three-Layered Dissimilar Joints with Advanced High-Strength Steel.” <i>Journal of Manufacturing Processes</i>, vol. 154, Elsevier, 2025, pp. 311–31, doi:<a href=\"https://doi.org/10.1016/j.jmapro.2025.09.077\">https://doi.org/10.1016/j.jmapro.2025.09.077</a>.","short":"V. Olfert, P. Bähr, L. Schuster, J. Westhoff, K. Yang, E. Ibeski, D. Hein, S. Sommer, G. Meschut, Journal of Manufacturing Processes 154 (2025) 311–331.","bibtex":"@article{Olfert_Bähr_Schuster_Westhoff_Yang_Ibeski_Hein_Sommer_Meschut_2025, title={Failure behavior prediction for resistance spot-welded three-layered dissimilar joints with advanced high-strength steel}, volume={154}, DOI={<a href=\"https://doi.org/10.1016/j.jmapro.2025.09.077\">https://doi.org/10.1016/j.jmapro.2025.09.077</a>}, journal={Journal of Manufacturing Processes}, publisher={Elsevier}, author={Olfert, Viktoria and Bähr, Philipp  and Schuster, Lilia and Westhoff, Julia and Yang, Keke and Ibeski, Enes and Hein, David and Sommer, Silke and Meschut, Gerson}, year={2025}, pages={311–331} }","apa":"Olfert, V., Bähr, P., Schuster, L., Westhoff, J., Yang, K., Ibeski, E., Hein, D., Sommer, S., &#38; Meschut, G. (2025). Failure behavior prediction for resistance spot-welded three-layered dissimilar joints with advanced high-strength steel. <i>Journal of Manufacturing Processes</i>, <i>154</i>, 311–331. <a href=\"https://doi.org/10.1016/j.jmapro.2025.09.077\">https://doi.org/10.1016/j.jmapro.2025.09.077</a>","ama":"Olfert V, Bähr P, Schuster L, et al. Failure behavior prediction for resistance spot-welded three-layered dissimilar joints with advanced high-strength steel. <i>Journal of Manufacturing Processes</i>. 2025;154:311-331. doi:<a href=\"https://doi.org/10.1016/j.jmapro.2025.09.077\">https://doi.org/10.1016/j.jmapro.2025.09.077</a>","chicago":"Olfert, Viktoria, Philipp  Bähr, Lilia Schuster, Julia Westhoff, Keke Yang, Enes Ibeski, David Hein, Silke Sommer, and Gerson Meschut. “Failure Behavior Prediction for Resistance Spot-Welded Three-Layered Dissimilar Joints with Advanced High-Strength Steel.” <i>Journal of Manufacturing Processes</i> 154 (2025): 311–31. <a href=\"https://doi.org/10.1016/j.jmapro.2025.09.077\">https://doi.org/10.1016/j.jmapro.2025.09.077</a>.","ieee":"V. Olfert <i>et al.</i>, “Failure behavior prediction for resistance spot-welded three-layered dissimilar joints with advanced high-strength steel,” <i>Journal of Manufacturing Processes</i>, vol. 154, pp. 311–331, 2025, doi: <a href=\"https://doi.org/10.1016/j.jmapro.2025.09.077\">https://doi.org/10.1016/j.jmapro.2025.09.077</a>."},"intvolume":"       154","page":"311-331","date_updated":"2025-10-06T16:19:53Z","oa":"1","author":[{"last_name":"Olfert","id":"5974","full_name":"Olfert, Viktoria","first_name":"Viktoria"},{"first_name":"Philipp ","last_name":"Bähr","full_name":"Bähr, Philipp "},{"first_name":"Lilia","full_name":"Schuster, Lilia","last_name":"Schuster"},{"full_name":"Westhoff, Julia","last_name":"Westhoff","first_name":"Julia"},{"first_name":"Keke","orcid":"0000-0001-9201-9304","last_name":"Yang","id":"65085","full_name":"Yang, Keke"},{"last_name":"Ibeski","full_name":"Ibeski, Enes","first_name":"Enes"},{"first_name":"David","last_name":"Hein","id":"7728","full_name":"Hein, David"},{"last_name":"Sommer","full_name":"Sommer, Silke","first_name":"Silke"},{"id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"volume":154,"doi":"https://doi.org/10.1016/j.jmapro.2025.09.077"},{"doi":"10.1080/01694243.2025.2569660","title":"Testing, modelling and parameter identification for adhesively bonded joints under the combined influence of temperature and strain rate","date_created":"2025-10-28T10:28:49Z","author":[{"first_name":"Lars","full_name":"Schmelzle, Lars","last_name":"Schmelzle"},{"first_name":"Marius","id":"30228","full_name":"Striewe, Marius","last_name":"Striewe"},{"last_name":"Mergheim","full_name":"Mergheim, Julia","first_name":"Julia"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson","id":"32056"},{"last_name":"Possart","full_name":"Possart, Gunnar","first_name":"Gunnar"},{"full_name":"Teutenberg, Dominik","id":"537","last_name":"Teutenberg","first_name":"Dominik"}],"date_updated":"2025-10-28T10:32:49Z","publisher":"Informa UK Limited","page":"1-24","citation":{"apa":"Schmelzle, L., Striewe, M., Mergheim, J., Meschut, G., Possart, G., &#38; Teutenberg, D. (2025). Testing, modelling and parameter identification for adhesively bonded joints under the combined influence of temperature and strain rate. <i>Journal of Adhesion Science and Technology</i>, 1–24. <a href=\"https://doi.org/10.1080/01694243.2025.2569660\">https://doi.org/10.1080/01694243.2025.2569660</a>","mla":"Schmelzle, Lars, et al. “Testing, Modelling and Parameter Identification for Adhesively Bonded Joints under the Combined Influence of Temperature and Strain Rate.” <i>Journal of Adhesion Science and Technology</i>, Informa UK Limited, 2025, pp. 1–24, doi:<a href=\"https://doi.org/10.1080/01694243.2025.2569660\">10.1080/01694243.2025.2569660</a>.","short":"L. Schmelzle, M. Striewe, J. Mergheim, G. Meschut, G. Possart, D. Teutenberg, Journal of Adhesion Science and Technology (2025) 1–24.","bibtex":"@article{Schmelzle_Striewe_Mergheim_Meschut_Possart_Teutenberg_2025, title={Testing, modelling and parameter identification for adhesively bonded joints under the combined influence of temperature and strain rate}, DOI={<a href=\"https://doi.org/10.1080/01694243.2025.2569660\">10.1080/01694243.2025.2569660</a>}, journal={Journal of Adhesion Science and Technology}, publisher={Informa UK Limited}, author={Schmelzle, Lars and Striewe, Marius and Mergheim, Julia and Meschut, Gerson and Possart, Gunnar and Teutenberg, Dominik}, year={2025}, pages={1–24} }","ama":"Schmelzle L, Striewe M, Mergheim J, Meschut G, Possart G, Teutenberg D. Testing, modelling and parameter identification for adhesively bonded joints under the combined influence of temperature and strain rate. <i>Journal of Adhesion Science and Technology</i>. Published online 2025:1-24. doi:<a href=\"https://doi.org/10.1080/01694243.2025.2569660\">10.1080/01694243.2025.2569660</a>","chicago":"Schmelzle, Lars, Marius Striewe, Julia Mergheim, Gerson Meschut, Gunnar Possart, and Dominik Teutenberg. “Testing, Modelling and Parameter Identification for Adhesively Bonded Joints under the Combined Influence of Temperature and Strain Rate.” <i>Journal of Adhesion Science and Technology</i>, 2025, 1–24. <a href=\"https://doi.org/10.1080/01694243.2025.2569660\">https://doi.org/10.1080/01694243.2025.2569660</a>.","ieee":"L. Schmelzle, M. Striewe, J. Mergheim, G. Meschut, G. Possart, and D. Teutenberg, “Testing, modelling and parameter identification for adhesively bonded joints under the combined influence of temperature and strain rate,” <i>Journal of Adhesion Science and Technology</i>, pp. 1–24, 2025, doi: <a href=\"https://doi.org/10.1080/01694243.2025.2569660\">10.1080/01694243.2025.2569660</a>."},"year":"2025","publication_identifier":{"issn":["0169-4243","1568-5616"]},"quality_controlled":"1","publication_status":"published","language":[{"iso":"eng"}],"department":[{"_id":"157"}],"user_id":"30228","_id":"62009","status":"public","publication":"Journal of Adhesion Science and Technology","type":"journal_article"},{"language":[{"iso":"eng"}],"project":[{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"},{"_id":"132","name":"TRR 285 - Project Area B"},{"name":"TRR 285 - Subproject B01","_id":"140"},{"name":"TRR 285 - Subproject B05","_id":"144"}],"_id":"61524","user_id":"107109","department":[{"_id":"43"},{"_id":"157"}],"status":"public","type":"journal_article","publication":"Journal of Manufacturing Processes","title":"From simulation to metamodel to experiment: Evaluating the prediction accuracy of polynomial regression models for clinch joint properties","doi":"10.1016/j.jmapro.2025.09.059","date_updated":"2025-11-12T08:35:35Z","publisher":"Elsevier BV","date_created":"2025-10-06T07:37:24Z","author":[{"last_name":"Einwag","full_name":"Einwag, Jonathan-Markus","first_name":"Jonathan-Markus"},{"first_name":"Christian","last_name":"Steinfelder","full_name":"Steinfelder, Christian"},{"last_name":"Wartzack","full_name":"Wartzack, Sandro","first_name":"Sandro"},{"first_name":"Alexander","full_name":"Brosius, Alexander","last_name":"Brosius"},{"first_name":"Stefan","full_name":"Goetz, Stefan","last_name":"Goetz"}],"volume":154,"year":"2025","citation":{"bibtex":"@article{Einwag_Steinfelder_Wartzack_Brosius_Goetz_2025, title={From simulation to metamodel to experiment: Evaluating the prediction accuracy of polynomial regression models for clinch joint properties}, volume={154}, DOI={<a href=\"https://doi.org/10.1016/j.jmapro.2025.09.059\">10.1016/j.jmapro.2025.09.059</a>}, journal={Journal of Manufacturing Processes}, publisher={Elsevier BV}, author={Einwag, Jonathan-Markus and Steinfelder, Christian and Wartzack, Sandro and Brosius, Alexander and Goetz, Stefan}, year={2025}, pages={179–191} }","short":"J.-M. Einwag, C. Steinfelder, S. Wartzack, A. Brosius, S. Goetz, Journal of Manufacturing Processes 154 (2025) 179–191.","mla":"Einwag, Jonathan-Markus, et al. “From Simulation to Metamodel to Experiment: Evaluating the Prediction Accuracy of Polynomial Regression Models for Clinch Joint Properties.” <i>Journal of Manufacturing Processes</i>, vol. 154, Elsevier BV, 2025, pp. 179–91, doi:<a href=\"https://doi.org/10.1016/j.jmapro.2025.09.059\">10.1016/j.jmapro.2025.09.059</a>.","apa":"Einwag, J.-M., Steinfelder, C., Wartzack, S., Brosius, A., &#38; Goetz, S. (2025). From simulation to metamodel to experiment: Evaluating the prediction accuracy of polynomial regression models for clinch joint properties. <i>Journal of Manufacturing Processes</i>, <i>154</i>, 179–191. <a href=\"https://doi.org/10.1016/j.jmapro.2025.09.059\">https://doi.org/10.1016/j.jmapro.2025.09.059</a>","ama":"Einwag J-M, Steinfelder C, Wartzack S, Brosius A, Goetz S. From simulation to metamodel to experiment: Evaluating the prediction accuracy of polynomial regression models for clinch joint properties. <i>Journal of Manufacturing Processes</i>. 2025;154:179-191. doi:<a href=\"https://doi.org/10.1016/j.jmapro.2025.09.059\">10.1016/j.jmapro.2025.09.059</a>","ieee":"J.-M. Einwag, C. Steinfelder, S. Wartzack, A. Brosius, and S. Goetz, “From simulation to metamodel to experiment: Evaluating the prediction accuracy of polynomial regression models for clinch joint properties,” <i>Journal of Manufacturing Processes</i>, vol. 154, pp. 179–191, 2025, doi: <a href=\"https://doi.org/10.1016/j.jmapro.2025.09.059\">10.1016/j.jmapro.2025.09.059</a>.","chicago":"Einwag, Jonathan-Markus, Christian Steinfelder, Sandro Wartzack, Alexander Brosius, and Stefan Goetz. “From Simulation to Metamodel to Experiment: Evaluating the Prediction Accuracy of Polynomial Regression Models for Clinch Joint Properties.” <i>Journal of Manufacturing Processes</i> 154 (2025): 179–91. <a href=\"https://doi.org/10.1016/j.jmapro.2025.09.059\">https://doi.org/10.1016/j.jmapro.2025.09.059</a>."},"page":"179-191","intvolume":"       154","publication_status":"published","publication_identifier":{"issn":["1526-6125"]}},{"publisher":"VDI Fachmedien GmbH and Co. KG","date_created":"2025-11-17T08:36:04Z","title":"Ressourceneffiziente Fertigung von Leichtbaustrukturen","quality_controlled":"1","issue":"10","year":"2025","language":[{"iso":"ger"}],"publication":"Werkstattstechnik online","abstract":[{"text":"Zur Steigerung der Ressourceneffizienz technischer Komponenten sind neben dem Leichtbau insbesondere neuartige Fertigungstechnologien und Prozessketten mit geschlossenen Stoffkreisläufen von großer Bedeutung. Im Beitrag werden am Beispiel einer Demonstratorstruktur aus hybriden Leichtbauprofilen (Aluminium und faserverstärktes Polyamid) technisch-technologische Lösungsoptionen für die gesamte Prozesskette inklusive des Recyclings vorgestellt und in Pilotversuchen bewertet.","lang":"ger"}],"date_updated":"2025-11-17T08:41:59Z","volume":115,"author":[{"last_name":"Weck","full_name":"Weck, Daniel","first_name":"Daniel"},{"first_name":"Michael","last_name":"Müller-Pabel","full_name":"Müller-Pabel, Michael"},{"full_name":"Krampitz, Thomas","last_name":"Krampitz","first_name":"Thomas"},{"first_name":"Christine","last_name":"Hecker","full_name":"Hecker, Christine"},{"full_name":"Selvaggio, Alessandro","last_name":"Selvaggio","first_name":"Alessandro"},{"id":"44391","full_name":"Gilich, Julian","last_name":"Gilich","first_name":"Julian"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"},{"last_name":"Lieberwirth","full_name":"Lieberwirth, Holger","first_name":"Holger"},{"first_name":"A. Erman","last_name":"Tekkaya","full_name":"Tekkaya, A. Erman"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056"}],"doi":"10.37544/1436-4980-2025-10-12","publication_status":"published","page":"708-717","intvolume":"       115","citation":{"apa":"Weck, D., Müller-Pabel, M., Krampitz, T., Hecker, C., Selvaggio, A., Gilich, J., Gude, M., Lieberwirth, H., Tekkaya, A. E., &#38; Meschut, G. (2025). Ressourceneffiziente Fertigung von Leichtbaustrukturen. <i>Werkstattstechnik online</i>, <i>115</i>(10), 708–717. <a href=\"https://doi.org/10.37544/1436-4980-2025-10-12\">https://doi.org/10.37544/1436-4980-2025-10-12</a>","mla":"Weck, Daniel, et al. “Ressourceneffiziente Fertigung von Leichtbaustrukturen.” <i>Werkstattstechnik online</i>, vol. 115, no. 10, VDI Fachmedien GmbH and Co. KG, 2025, pp. 708–17, doi:<a href=\"https://doi.org/10.37544/1436-4980-2025-10-12\">10.37544/1436-4980-2025-10-12</a>.","short":"D. Weck, M. Müller-Pabel, T. Krampitz, C. Hecker, A. Selvaggio, J. Gilich, M. Gude, H. Lieberwirth, A.E. Tekkaya, G. Meschut, Werkstattstechnik online 115 (2025) 708–717.","bibtex":"@article{Weck_Müller-Pabel_Krampitz_Hecker_Selvaggio_Gilich_Gude_Lieberwirth_Tekkaya_Meschut_2025, title={Ressourceneffiziente Fertigung von Leichtbaustrukturen}, volume={115}, DOI={<a href=\"https://doi.org/10.37544/1436-4980-2025-10-12\">10.37544/1436-4980-2025-10-12</a>}, number={10}, journal={Werkstattstechnik online}, publisher={VDI Fachmedien GmbH and Co. KG}, author={Weck, Daniel and Müller-Pabel, Michael and Krampitz, Thomas and Hecker, Christine and Selvaggio, Alessandro and Gilich, Julian and Gude, Maik and Lieberwirth, Holger and Tekkaya, A. Erman and Meschut, Gerson}, year={2025}, pages={708–717} }","chicago":"Weck, Daniel, Michael Müller-Pabel, Thomas Krampitz, Christine Hecker, Alessandro Selvaggio, Julian Gilich, Maik Gude, Holger Lieberwirth, A. Erman Tekkaya, and Gerson Meschut. “Ressourceneffiziente Fertigung von Leichtbaustrukturen.” <i>Werkstattstechnik online</i> 115, no. 10 (2025): 708–17. <a href=\"https://doi.org/10.37544/1436-4980-2025-10-12\">https://doi.org/10.37544/1436-4980-2025-10-12</a>.","ieee":"D. Weck <i>et al.</i>, “Ressourceneffiziente Fertigung von Leichtbaustrukturen,” <i>Werkstattstechnik online</i>, vol. 115, no. 10, pp. 708–717, 2025, doi: <a href=\"https://doi.org/10.37544/1436-4980-2025-10-12\">10.37544/1436-4980-2025-10-12</a>.","ama":"Weck D, Müller-Pabel M, Krampitz T, et al. Ressourceneffiziente Fertigung von Leichtbaustrukturen. <i>Werkstattstechnik online</i>. 2025;115(10):708-717. doi:<a href=\"https://doi.org/10.37544/1436-4980-2025-10-12\">10.37544/1436-4980-2025-10-12</a>"},"_id":"62211","department":[{"_id":"157"}],"user_id":"44391","type":"journal_article","status":"public"},{"abstract":[{"lang":"eng","text":"In the context of decarbonization initiatives, the repairability and recyclability of components have become a major concern in various industrial sectors, particularly for resource-intensive components. The development of innovative bonding and debonding processes that must adhere to the stringent mechanical specifications of the manufacturers and facilitate their efficient disassembly is a major issue faced in the implementation of a sustainable circular economy. Although adhesively bonded joints satisfy the stringent requirements for mechanical performance, they present several challenges during the repair and recycling process. Solvolytically debondable epoxy resin adhesives may be employed to overcome this issue. In this study, we aim to conduct an exploratory feasibility study on the application of such chemical debonding mechanisms within an adhesive bond as well as to systematically analyse and evaluate the suitability of such adhesive systems for various applications. To this end, we employed various thermo-analytical methods and quasi-static tensile tests to characterise the mechanical adhesive and joint properties of two solvolytically debondable adhesive systems. Furthermore, we analysed the debondability of the adhesive joints and evaluated their feasibility in an industrial environment. The results indicate considerable application potential for solvolytically debondable adhesives, along with further development steps currently required."}],"status":"public","publication":"The Journal of Adhesion","type":"journal_article","language":[{"iso":"eng"}],"_id":"63108","department":[{"_id":"157"}],"user_id":"44391","year":"2025","page":"1-26","citation":{"ama":"Gilich J, Kroos J, Teutenberg D, Meschut G. Solvolytically debondable adhesive systems – potentials and challenges for repair and recycling. <i>The Journal of Adhesion</i>. Published online 2025:1-26. doi:<a href=\"https://doi.org/10.1080/00218464.2025.2600590\">10.1080/00218464.2025.2600590</a>","ieee":"J. Gilich, J. Kroos, D. Teutenberg, and G. Meschut, “Solvolytically debondable adhesive systems – potentials and challenges for repair and recycling,” <i>The Journal of Adhesion</i>, pp. 1–26, 2025, doi: <a href=\"https://doi.org/10.1080/00218464.2025.2600590\">10.1080/00218464.2025.2600590</a>.","chicago":"Gilich, Julian, Janika Kroos, Dominik Teutenberg, and Gerson Meschut. “Solvolytically Debondable Adhesive Systems – Potentials and Challenges for Repair and Recycling.” <i>The Journal of Adhesion</i>, 2025, 1–26. <a href=\"https://doi.org/10.1080/00218464.2025.2600590\">https://doi.org/10.1080/00218464.2025.2600590</a>.","apa":"Gilich, J., Kroos, J., Teutenberg, D., &#38; Meschut, G. (2025). Solvolytically debondable adhesive systems – potentials and challenges for repair and recycling. <i>The Journal of Adhesion</i>, 1–26. <a href=\"https://doi.org/10.1080/00218464.2025.2600590\">https://doi.org/10.1080/00218464.2025.2600590</a>","short":"J. Gilich, J. Kroos, D. Teutenberg, G. Meschut, The Journal of Adhesion (2025) 1–26.","mla":"Gilich, Julian, et al. “Solvolytically Debondable Adhesive Systems – Potentials and Challenges for Repair and Recycling.” <i>The Journal of Adhesion</i>, Informa UK Limited, 2025, pp. 1–26, doi:<a href=\"https://doi.org/10.1080/00218464.2025.2600590\">10.1080/00218464.2025.2600590</a>.","bibtex":"@article{Gilich_Kroos_Teutenberg_Meschut_2025, title={Solvolytically debondable adhesive systems – potentials and challenges for repair and recycling}, DOI={<a href=\"https://doi.org/10.1080/00218464.2025.2600590\">10.1080/00218464.2025.2600590</a>}, journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Gilich, Julian and Kroos, Janika and Teutenberg, Dominik and Meschut, Gerson}, year={2025}, pages={1–26} }"},"quality_controlled":"1","publication_identifier":{"issn":["0021-8464","1545-5823"]},"publication_status":"published","title":"Solvolytically debondable adhesive systems – potentials and challenges for repair and recycling","doi":"10.1080/00218464.2025.2600590","date_updated":"2025-12-16T07:53:52Z","publisher":"Informa UK Limited","author":[{"id":"44391","full_name":"Gilich, Julian","last_name":"Gilich","first_name":"Julian"},{"last_name":"Kroos","full_name":"Kroos, Janika","id":"50198","first_name":"Janika"},{"first_name":"Dominik","last_name":"Teutenberg","id":"537","full_name":"Teutenberg, Dominik"},{"last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056","first_name":"Gerson"}],"date_created":"2025-12-16T07:50:36Z"},{"title":"Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components","date_created":"2025-03-25T07:59:49Z","publisher":"Materials Research Forum LLC","year":"2025","quality_controlled":"1","language":[{"iso":"eng"}],"ddc":["600"],"license":"https://creativecommons.org/licenses/by-nc/3.0/","file":[{"content_type":"application/pdf","success":1,"relation":"main_file","date_updated":"2025-03-25T08:02:30Z","creator":"kekeyang","date_created":"2025-03-25T08:02:30Z","file_size":1901767,"file_id":"59092","file_name":"Shemat.pdf","access_level":"closed"}],"abstract":[{"lang":"eng","text":"<jats:p>Abstract. Liquid Metal Embrittlement (LME) cracking is a well-documented issue encountered during resistance spot welding (RSW) of zinc-coated advanced high-strength steels (AHSS) in automotive manufacturing. Given that existing research has predominantly focused on laboratory-scale samples and lacks investigation into the load-bearing capacity of joints under crash conditions, this study aims to fill these gaps by analyzing third-generation zinc-coated AHSS. S-Rail components were produced through stamping to replicate real-world manufacturing conditions and geometries of automotive parts. To account for the disturbances typically encountered in production, samples with LME cracks were intentionally fabricated. Subsequently, a modified three-point bending test, assisted by numerical simulations, was developed to effectively apply loads to the weld spots of the S-Rail components. Results from crash tests demonstrated that observed light crack severity does not significantly compromise the joint's load-bearing capacity or lead to earlier joint failure.</jats:p>"}],"publication":"Materials Research Proceedings","doi":"10.21741/9781644903551-42","main_file_link":[{"open_access":"1"}],"volume":52,"author":[{"first_name":"Keke","orcid":"0000-0001-9201-9304","last_name":"Yang","full_name":"Yang, Keke","id":"65085"},{"first_name":"Max","full_name":"Biegler, Max","last_name":"Biegler"},{"last_name":"Happe","full_name":"Happe, Linus","first_name":"Linus"},{"last_name":"Striewe","id":"30228","full_name":"Striewe, Marius","first_name":"Marius"},{"first_name":"Viktoria","id":"5974","full_name":"Olfert, Viktoria","last_name":"Olfert"},{"first_name":"David","id":"7728","full_name":"Hein, David","last_name":"Hein"},{"first_name":"Michael ","full_name":"Rethmeier, Michael ","last_name":"Rethmeier"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","id":"32056","full_name":"Meschut, Gerson"}],"date_updated":"2025-12-26T13:44:36Z","oa":"1","intvolume":"        52","citation":{"mla":"Yang, Keke, et al. “Influence of Liquid Metal Embrittlement on Load-Bearing Capacity of Resistance Spot Welds under Crash Loads: A Study Based on S-Rail Components.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903551-42\">10.21741/9781644903551-42</a>.","short":"K. Yang, M. Biegler, L. Happe, M. Striewe, V. Olfert, D. Hein, M. Rethmeier, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","bibtex":"@inproceedings{Yang_Biegler_Happe_Striewe_Olfert_Hein_Rethmeier_Meschut_2025, title={Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-42\">10.21741/9781644903551-42</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Yang, Keke and Biegler, Max and Happe, Linus and Striewe, Marius and Olfert, Viktoria and Hein, David and Rethmeier, Michael  and Meschut, Gerson}, year={2025} }","apa":"Yang, K., Biegler, M., Happe, L., Striewe, M., Olfert, V., Hein, D., Rethmeier, M., &#38; Meschut, G. (2025). Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components. <i>Materials Research Proceedings</i>, <i>52</i>. <a href=\"https://doi.org/10.21741/9781644903551-42\">https://doi.org/10.21741/9781644903551-42</a>","chicago":"Yang, Keke, Max Biegler, Linus Happe, Marius Striewe, Viktoria Olfert, David Hein, Michael  Rethmeier, and Gerson Meschut. “Influence of Liquid Metal Embrittlement on Load-Bearing Capacity of Resistance Spot Welds under Crash Loads: A Study Based on S-Rail Components.” In <i>Materials Research Proceedings</i>, Vol. 52. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-42\">https://doi.org/10.21741/9781644903551-42</a>.","ieee":"K. Yang <i>et al.</i>, “Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components,” in <i>Materials Research Proceedings</i>, 2025, vol. 52, doi: <a href=\"https://doi.org/10.21741/9781644903551-42\">10.21741/9781644903551-42</a>.","ama":"Yang K, Biegler M, Happe L, et al. Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903551-42\">10.21741/9781644903551-42</a>"},"publication_identifier":{"issn":["2474-395X"]},"has_accepted_license":"1","publication_status":"published","file_date_updated":"2025-03-25T08:02:30Z","department":[{"_id":"157"}],"user_id":"65085","_id":"59091","status":"public","type":"conference"},{"type":"conference","status":"public","user_id":"65085","department":[{"_id":"157"}],"_id":"60604","publication_status":"published","publication_identifier":{"issn":["2474-395X"]},"citation":{"short":"V. Olfert, K. Yang, M. Gollnick, J. Krause, D. Hein, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","bibtex":"@inproceedings{Olfert_Yang_Gollnick_Krause_Hein_Meschut_2025, title={Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry}, volume={54}, DOI={<a href=\"https://doi.org/10.21741/9781644903599-154\">10.21741/9781644903599-154</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Olfert, Viktoria and Yang, Keke and Gollnick, Maik and Krause, Jacob and Hein, David and Meschut, Gerson}, year={2025} }","mla":"Olfert, Viktoria, et al. “Analysis of Fatigue Behaviour of Self-Piercing Riveted Joints under Cyclic Loading Using Laser Vibrometry.” <i>Materials Research Proceedings</i>, vol. 54, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903599-154\">10.21741/9781644903599-154</a>.","apa":"Olfert, V., Yang, K., Gollnick, M., Krause, J., Hein, D., &#38; Meschut, G. (2025). Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry. <i>Materials Research Proceedings</i>, <i>54</i>. <a href=\"https://doi.org/10.21741/9781644903599-154\">https://doi.org/10.21741/9781644903599-154</a>","ama":"Olfert V, Yang K, Gollnick M, Krause J, Hein D, Meschut G. Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry. In: <i>Materials Research Proceedings</i>. Vol 54. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903599-154\">10.21741/9781644903599-154</a>","chicago":"Olfert, Viktoria, Keke Yang, Maik Gollnick, Jacob Krause, David Hein, and Gerson Meschut. “Analysis of Fatigue Behaviour of Self-Piercing Riveted Joints under Cyclic Loading Using Laser Vibrometry.” In <i>Materials Research Proceedings</i>, Vol. 54. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903599-154\">https://doi.org/10.21741/9781644903599-154</a>.","ieee":"V. Olfert, K. Yang, M. Gollnick, J. Krause, D. Hein, and G. Meschut, “Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry,” in <i>Materials Research Proceedings</i>, 2025, vol. 54, doi: <a href=\"https://doi.org/10.21741/9781644903599-154\">10.21741/9781644903599-154</a>."},"intvolume":"        54","author":[{"first_name":"Viktoria","id":"5974","full_name":"Olfert, Viktoria","last_name":"Olfert"},{"first_name":"Keke","id":"65085","full_name":"Yang, Keke","orcid":"0000-0001-9201-9304","last_name":"Yang"},{"first_name":"Maik","last_name":"Gollnick","full_name":"Gollnick, Maik"},{"last_name":"Krause","full_name":"Krause, Jacob","first_name":"Jacob"},{"first_name":"David","last_name":"Hein","full_name":"Hein, David","id":"7728"},{"last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson"}],"volume":54,"oa":"1","date_updated":"2025-12-26T13:45:01Z","main_file_link":[{"open_access":"1"}],"doi":"10.21741/9781644903599-154","publication":"Materials Research Proceedings","abstract":[{"lang":"eng","text":"<jats:p>Abstract. In the field of online condition monitoring, non-destructive testing methods using active acoustic testing [1] emerged as innovative tools. These techniques are particularly effective because damage in joined structures leads to significant changes in their vibrational characteristics. However, the consistent use of online condition monitoring through active acoustic testing combined with complex pattern recognition for early crack detection in joined components has not yet been fully established. This research aims to develop an online crack detection system employing pattern recognition techniques under cyclic loading during fatigue tests, utilizing non-contact active acoustic testing with laser vibrometry. Due to the wide range of materials that can be joined, mechanical joining processes can be used in many different industry branches. Self-pierce riveting (SPR), in particular, is a well-established joining process. Therefore, the investigations for online crack detection initially focus on SPR joints. To achieve this, the fatigue behavior of SPR joints in a lap-shear configuration was characterized. Experimental fatigue testing demonstrated that SPR joint failure occurs either through cracks propagating in the sheet material away from the rivet or in the rivet foot, depending on the material combination. Laser vibrometry has been successfully used as a crack detection system and has proven to be effective in detecting crack initiation in SPR joints. Cracks can be detected without contact regardless of the material combination, the damage location, the size of the damage, or the type of damage.  The optimization of the crack detection system involved several key enhancements, including adjusting data acquisition to improve crack detection, incorporating principal component analysis (PCA) to reduce dimensionality, and implementing a classification model based on a global training dataset. An intuitive, problem-specific software demonstrator for analyzing the crack initiation behavior of SPR joints under cyclic loading was developed and iteratively optimized. Future work will focus on the implementation of an autoencoder network to further enhance crack detection capabilities.</jats:p>"}],"language":[{"iso":"eng"}],"quality_controlled":"1","year":"2025","date_created":"2025-07-14T13:25:26Z","publisher":"Materials Research Forum LLC","title":"Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry"},{"article_type":"original","article_number":"100332","_id":"60837","user_id":"103302","department":[{"_id":"157"},{"_id":"876"},{"_id":"321"},{"_id":"9"}],"status":"public","type":"journal_article","main_file_link":[{"url":"https://www.sciencedirect.com/science/article/pii/S2666330925000536?via%3Dihub","open_access":"1"}],"doi":"10.1016/j.jajp.2025.100332","oa":"1","date_updated":"2026-01-06T08:22:54Z","author":[{"full_name":"Jordan, Alex","id":"62451","orcid":"0009-0007-9546-6071","last_name":"Jordan","first_name":"Alex"},{"last_name":"Hermelingmeier","id":"58649","full_name":"Hermelingmeier, Lucas","first_name":"Lucas"},{"first_name":"Julian","id":"44391","full_name":"Gilich, Julian","last_name":"Gilich"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246"},{"first_name":"Marco Sebastian","last_name":"De Santis","id":"52239","full_name":"De Santis, Marco Sebastian"},{"last_name":"Schlüter","orcid":"0000-0002-2569-1624","id":"103302","full_name":"Schlüter, Alexander","first_name":"Alexander"}],"volume":12,"citation":{"chicago":"Jordan, Alex, Lucas Hermelingmeier, Julian Gilich, Gerson Meschut, Marco Sebastian De Santis, and Alexander Schlüter. “Comparison of the Economic Efficiency and Sustainability of Two Debonding Processes for Structurally Bonded Sills.” <i>Journal of Advanced Joining Processes</i> 12 (2025). <a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">https://doi.org/10.1016/j.jajp.2025.100332</a>.","ieee":"A. Jordan, L. Hermelingmeier, J. Gilich, G. Meschut, M. S. De Santis, and A. Schlüter, “Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills,” <i>Journal of Advanced Joining Processes</i>, vol. 12, Art. no. 100332, 2025, doi: <a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">10.1016/j.jajp.2025.100332</a>.","ama":"Jordan A, Hermelingmeier L, Gilich J, Meschut G, De Santis MS, Schlüter A. Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills. <i>Journal of Advanced Joining Processes</i>. 2025;12. doi:<a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">10.1016/j.jajp.2025.100332</a>","apa":"Jordan, A., Hermelingmeier, L., Gilich, J., Meschut, G., De Santis, M. S., &#38; Schlüter, A. (2025). Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills. <i>Journal of Advanced Joining Processes</i>, <i>12</i>, Article 100332. <a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">https://doi.org/10.1016/j.jajp.2025.100332</a>","mla":"Jordan, Alex, et al. “Comparison of the Economic Efficiency and Sustainability of Two Debonding Processes for Structurally Bonded Sills.” <i>Journal of Advanced Joining Processes</i>, vol. 12, 100332, Elsevier, 2025, doi:<a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">10.1016/j.jajp.2025.100332</a>.","short":"A. Jordan, L. Hermelingmeier, J. Gilich, G. Meschut, M.S. De Santis, A. Schlüter, Journal of Advanced Joining Processes 12 (2025).","bibtex":"@article{Jordan_Hermelingmeier_Gilich_Meschut_De Santis_Schlüter_2025, title={Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills}, volume={12}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">10.1016/j.jajp.2025.100332</a>}, number={100332}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier}, author={Jordan, Alex and Hermelingmeier, Lucas and Gilich, Julian and Meschut, Gerson and De Santis, Marco Sebastian and Schlüter, Alexander}, year={2025} }"},"intvolume":"        12","publication_status":"published","publication_identifier":{"issn":["2666-3309"]},"keyword":["Sustainable debonding","Structural adhesives","Sustainable joining technologies","Life Cycle Assessment (LCA)","Automotive repair process","Economically efficient debonding"],"language":[{"iso":"eng"}],"abstract":[{"text":"In light of growing demands for resource efficiency and sustainability in vehicle engineering, the environmentally compatible separation of structural adhesive joints is gaining increasing relevance. This study presents a comparative analysis of two physically based debonding methods: the established hot-air process and a cryogenic cold process based on liquid nitrogen (LN2). The primary objective is to assess the ecological impact and process-related sustainability of both approaches.\r\nExperimental investigations were conducted on a component-representative triple-sheet structure that simulates common automotive flange joints. Thermal input was applied either by convective heating using a hot air gun or by direct cooling through a contact-based LN2 tool. The resulting temperature profiles were recorded using spatially distributed thermocouples. Subsequently, the outer panel was selectively debonded to replicate a repair scenario, and the mechanical integrity of the remaining adhesive joint was evaluated through Mode I testing of L-shaped specimens. Process data served as input for an Life Cycle Assessment (LCA) according to DIN EN ISO 14040.\r\nThe cryogenic method achieved a 40% reduction in carbon footprint compared to the hot-air process (0.337 kg vs. 0.559 kg CO2-equivalents), primarily due to its shorter process time and more efficient heat transfer. While the hot-air method’s impact is mainly driven by electrical energy use, that of the cold method stems from cryogenic media consumption. Notwithstanding certain disadvantages in specific impact categories, the LN2-based process exhibits a superior overall ecological performance and signifies a promising solution for repair- and recycling-oriented adhesive separation in structural vehicle applications.","lang":"eng"}],"publication":"Journal of Advanced Joining Processes","title":"Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills","publisher":"Elsevier","date_created":"2025-07-30T11:04:28Z","year":"2025","quality_controlled":"1"},{"publication_identifier":{"issn":["1526-6125"]},"publication_status":"published","intvolume":"       116","page":"92-108","citation":{"ieee":"D. Han, F. Kappe, J. Vorderbrüggen, J. Jendrny, E. Gorr, and G. Meschut, “Single-step self-punching lockbolt process for aluminum sheets without pre-hole,” <i>Journal of Manufacturing Processes</i>, vol. 116, pp. 92–108, 2024, doi: <a href=\"https://doi.org/10.1016/j.jmapro.2024.02.043\">10.1016/j.jmapro.2024.02.043</a>.","chicago":"Han, Daxin, Fabian Kappe, Julian Vorderbrüggen, Jörg Jendrny, Eugen Gorr, and Gerson Meschut. “Single-Step Self-Punching Lockbolt Process for Aluminum Sheets without Pre-Hole.” <i>Journal of Manufacturing Processes</i> 116 (2024): 92–108. <a href=\"https://doi.org/10.1016/j.jmapro.2024.02.043\">https://doi.org/10.1016/j.jmapro.2024.02.043</a>.","ama":"Han D, Kappe F, Vorderbrüggen J, Jendrny J, Gorr E, Meschut G. Single-step self-punching lockbolt process for aluminum sheets without pre-hole. <i>Journal of Manufacturing Processes</i>. 2024;116:92-108. doi:<a href=\"https://doi.org/10.1016/j.jmapro.2024.02.043\">10.1016/j.jmapro.2024.02.043</a>","apa":"Han, D., Kappe, F., Vorderbrüggen, J., Jendrny, J., Gorr, E., &#38; Meschut, G. (2024). Single-step self-punching lockbolt process for aluminum sheets without pre-hole. <i>Journal of Manufacturing Processes</i>, <i>116</i>, 92–108. <a href=\"https://doi.org/10.1016/j.jmapro.2024.02.043\">https://doi.org/10.1016/j.jmapro.2024.02.043</a>","mla":"Han, Daxin, et al. “Single-Step Self-Punching Lockbolt Process for Aluminum Sheets without Pre-Hole.” <i>Journal of Manufacturing Processes</i>, vol. 116, Elsevier BV, 2024, pp. 92–108, doi:<a href=\"https://doi.org/10.1016/j.jmapro.2024.02.043\">10.1016/j.jmapro.2024.02.043</a>.","bibtex":"@article{Han_Kappe_Vorderbrüggen_Jendrny_Gorr_Meschut_2024, title={Single-step self-punching lockbolt process for aluminum sheets without pre-hole}, volume={116}, DOI={<a href=\"https://doi.org/10.1016/j.jmapro.2024.02.043\">10.1016/j.jmapro.2024.02.043</a>}, journal={Journal of Manufacturing Processes}, publisher={Elsevier BV}, author={Han, Daxin and Kappe, Fabian and Vorderbrüggen, Julian and Jendrny, Jörg and Gorr, Eugen and Meschut, Gerson}, year={2024}, pages={92–108} }","short":"D. Han, F. Kappe, J. Vorderbrüggen, J. Jendrny, E. Gorr, G. Meschut, Journal of Manufacturing Processes 116 (2024) 92–108."},"year":"2024","volume":116,"date_created":"2024-02-28T13:37:09Z","author":[{"first_name":"Daxin","last_name":"Han","full_name":"Han, Daxin"},{"first_name":"Fabian","last_name":"Kappe","id":"66459","full_name":"Kappe, Fabian"},{"first_name":"Julian","last_name":"Vorderbrüggen","full_name":"Vorderbrüggen, Julian"},{"first_name":"Jörg","last_name":"Jendrny","full_name":"Jendrny, Jörg"},{"last_name":"Gorr","full_name":"Gorr, Eugen","first_name":"Eugen"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson","id":"32056"}],"publisher":"Elsevier BV","date_updated":"2024-02-28T13:38:47Z","doi":"10.1016/j.jmapro.2024.02.043","title":"Single-step self-punching lockbolt process for aluminum sheets without pre-hole","publication":"Journal of Manufacturing Processes","type":"journal_article","status":"public","department":[{"_id":"157"}],"user_id":"66459","_id":"52201","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Management Science and Operations Research","Strategy and Management"]},{"publication":"24. Kolloquium: Gemeinsame Forschung in der Klebtechnik","type":"conference","status":"public","_id":"52215","department":[{"_id":"157"}],"user_id":"40263","language":[{"iso":"ger"}],"year":"2024","citation":{"ieee":"V. Carillo Beber <i>et al.</i>, “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden,” presented at the 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2024.","chicago":"Carillo Beber, Vinicius, Pedro Fernandes, Christof Nagel, Christian Köster, Anton Matzenmiller, Mathias Hecht, Jörg Baumgartner, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” In <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2024.","short":"V. Carillo Beber, P. Fernandes, C. Nagel, C. Köster, A. Matzenmiller, M. Hecht, J. Baumgartner, T. Melz, K. Tews, S. Çavdar, G. Meschut, in: 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.","bibtex":"@inproceedings{Carillo Beber_Fernandes_Nagel_Köster_Matzenmiller_Hecht_Baumgartner_Melz_Tews_Çavdar_et al._2024, title={Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden}, booktitle={24. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Carillo Beber, Vinicius and Fernandes, Pedro and Nagel, Christof and Köster, Christian and Matzenmiller, Anton and Hecht, Mathias and Baumgartner, Jörg and Melz, Tobias and Tews, Karina and Çavdar, Serkan and et al.}, year={2024} }","mla":"Carillo Beber, Vinicius, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2024.","apa":"Carillo Beber, V., Fernandes, P., Nagel, C., Köster, C., Matzenmiller, A., Hecht, M., Baumgartner, J., Melz, T., Tews, K., Çavdar, S., &#38; Meschut, G. (2024). Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden. <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>. 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln.","ama":"Carillo Beber V, Fernandes P, Nagel C, et al. Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden. In: <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>. ; 2024."},"date_updated":"2024-02-29T12:33:37Z","author":[{"full_name":"Carillo Beber, Vinicius","last_name":"Carillo Beber","first_name":"Vinicius"},{"first_name":"Pedro","full_name":"Fernandes, Pedro","last_name":"Fernandes"},{"first_name":"Christof","full_name":"Nagel, Christof","last_name":"Nagel"},{"first_name":"Christian","last_name":"Köster","full_name":"Köster, Christian"},{"full_name":"Matzenmiller, Anton","last_name":"Matzenmiller","first_name":"Anton"},{"last_name":"Hecht","full_name":"Hecht, Mathias","first_name":"Mathias"},{"first_name":"Jörg","last_name":"Baumgartner","full_name":"Baumgartner, Jörg"},{"first_name":"Tobias","last_name":"Melz","full_name":"Melz, Tobias"},{"last_name":"Tews","id":"40263","full_name":"Tews, Karina","first_name":"Karina"},{"id":"36456","full_name":"Çavdar, Serkan","last_name":"Çavdar","first_name":"Serkan"},{"id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"date_created":"2024-02-29T12:29:17Z","title":"Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden","conference":{"start_date":"2024-02-27","name":"24. Kolloquium: Gemeinsame Forschung in der Klebtechnik","location":"Köln","end_date":"2024-02-28"}},{"status":"public","publication":"24. Kolloquium: Gemeinsame Forschung in der Klebtechnik","type":"conference","language":[{"iso":"ger"}],"_id":"52212","department":[{"_id":"157"}],"user_id":"40263","year":"2024","citation":{"mla":"Tews, Karina, et al. “Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden.” <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2024.","bibtex":"@inproceedings{Tews_Teutenberg_Meschut_Buczek_Duffe_Kullmer_2024, title={Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden}, booktitle={24. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Tews, Karina and Teutenberg, Dominik and Meschut, Gerson and Buczek, Moritz and Duffe, Tobias and Kullmer, Gunter}, year={2024} }","short":"K. Tews, D. Teutenberg, G. Meschut, M. Buczek, T. Duffe, G. Kullmer, in: 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.","apa":"Tews, K., Teutenberg, D., Meschut, G., Buczek, M., Duffe, T., &#38; Kullmer, G. (2024). Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden. <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>. 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln.","ama":"Tews K, Teutenberg D, Meschut G, Buczek M, Duffe T, Kullmer G. Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden. In: <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>. ; 2024.","ieee":"K. Tews, D. Teutenberg, G. Meschut, M. Buczek, T. Duffe, and G. Kullmer, “Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden,” presented at the 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2024.","chicago":"Tews, Karina, Dominik Teutenberg, Gerson Meschut, Moritz Buczek, Tobias Duffe, and Gunter Kullmer. “Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden.” In <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2024."},"title":"Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden","conference":{"end_date":"2024-02-28","location":"Köln","name":"24. Kolloquium: Gemeinsame Forschung in der Klebtechnik","start_date":"2024-02-27"},"date_updated":"2024-02-29T12:33:41Z","date_created":"2024-02-29T12:24:25Z","author":[{"id":"40263","full_name":"Tews, Karina","last_name":"Tews","first_name":"Karina"},{"last_name":"Teutenberg","full_name":"Teutenberg, Dominik","id":"537","first_name":"Dominik"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"},{"last_name":"Buczek","full_name":"Buczek, Moritz","id":"83727","first_name":"Moritz"},{"first_name":"Tobias","last_name":"Duffe","id":"41322","full_name":"Duffe, Tobias"},{"last_name":"Kullmer","id":"291","full_name":"Kullmer, Gunter","first_name":"Gunter"}]},{"author":[{"last_name":"Chudalla","full_name":"Chudalla, Nick","id":"41235","first_name":"Nick"},{"last_name":"Schmolke","full_name":"Schmolke, Tobias","id":"44759","first_name":"Tobias"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056"},{"first_name":"Sebastian","full_name":"Spohr, Sebastian","last_name":"Spohr"},{"last_name":"Eckstein","full_name":"Eckstein, Lutz","first_name":"Lutz"},{"last_name":"Brunner-Schwer","full_name":"Brunner-Schwer, Christian","first_name":"Christian"},{"full_name":"Rethmeier, Michael","last_name":"Rethmeier","first_name":"Michael"},{"first_name":"Rolf","full_name":"Nothelfer-Richter, Rolf","last_name":"Nothelfer-Richter"},{"last_name":"Hilt","full_name":"Hilt, MIchael","first_name":"MIchael"}],"date_created":"2024-03-07T14:10:35Z","date_updated":"2024-03-07T14:11:14Z","conference":{"start_date":"2024-02-27","name":"24. Kolloquium: Gemeinsame Forschung in der Klebtechnik","location":"Köln","end_date":"2024-02-28"},"title":"Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes","citation":{"apa":"Chudalla, N., Schmolke, T., Meschut, G., Spohr, S., Eckstein, L., Brunner-Schwer, C., Rethmeier, M., Nothelfer-Richter, R., &#38; Hilt, Mi. (2024). Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes. <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>. 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln.","bibtex":"@inproceedings{Chudalla_Schmolke_Meschut_Spohr_Eckstein_Brunner-Schwer_Rethmeier_Nothelfer-Richter_Hilt_2024, title={Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes}, booktitle={24. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Chudalla, Nick and Schmolke, Tobias and Meschut, Gerson and Spohr, Sebastian and Eckstein, Lutz and Brunner-Schwer, Christian and Rethmeier, Michael and Nothelfer-Richter, Rolf and Hilt, MIchael}, year={2024} }","short":"N. Chudalla, T. Schmolke, G. Meschut, S. Spohr, L. Eckstein, C. Brunner-Schwer, M. Rethmeier, R. Nothelfer-Richter, Mi. Hilt, in: 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.","mla":"Chudalla, Nick, et al. “Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes.” <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2024.","ama":"Chudalla N, Schmolke T, Meschut G, et al. Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes. In: <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>. ; 2024.","chicago":"Chudalla, Nick, Tobias Schmolke, Gerson Meschut, Sebastian Spohr, Lutz Eckstein, Christian Brunner-Schwer, Michael Rethmeier, Rolf Nothelfer-Richter, and MIchael Hilt. “Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes.” In <i>24. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2024.","ieee":"N. Chudalla <i>et al.</i>, “Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes,” presented at the 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2024."},"year":"2024","department":[{"_id":"157"}],"user_id":"41235","_id":"52359","language":[{"iso":"ger"}],"publication":"24. Kolloquium: Gemeinsame Forschung in der Klebtechnik","type":"conference","status":"public"}]