[{"publisher":"Springer Nature Switzerland","date_updated":"2026-01-05T12:15:14Z","date_created":"2026-01-05T10:24:08Z","author":[{"last_name":"Bartmann","full_name":"Bartmann, Finn","first_name":"Finn"},{"first_name":"Alexander","last_name":"Riedl","full_name":"Riedl, Alexander"},{"first_name":"Elmar","id":"20531","full_name":"Moritzer, Elmar","last_name":"Moritzer"}],"title":"Creep Effects of Thermoplastic Flange Systems","doi":"10.1007/978-3-032-07392-1_39","publication_status":"published","publication_identifier":{"isbn":["9783032073914","9783032073921"],"issn":["2195-4356","2195-4364"]},"year":"2025","place":"Cham","citation":{"apa":"Bartmann, F., Riedl, A., &#38; Moritzer, E. (2025). Creep Effects of Thermoplastic Flange Systems. In <i>Lecture Notes in Mechanical Engineering</i>. Springer Nature Switzerland. <a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">https://doi.org/10.1007/978-3-032-07392-1_39</a>","mla":"Bartmann, Finn, et al. “Creep Effects of Thermoplastic Flange Systems.” <i>Lecture Notes in Mechanical Engineering</i>, Springer Nature Switzerland, 2025, doi:<a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">10.1007/978-3-032-07392-1_39</a>.","short":"F. Bartmann, A. Riedl, E. Moritzer, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2025.","bibtex":"@inbook{Bartmann_Riedl_Moritzer_2025, place={Cham}, title={Creep Effects of Thermoplastic Flange Systems}, DOI={<a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">10.1007/978-3-032-07392-1_39</a>}, booktitle={Lecture Notes in Mechanical Engineering}, publisher={Springer Nature Switzerland}, author={Bartmann, Finn and Riedl, Alexander and Moritzer, Elmar}, year={2025} }","ama":"Bartmann F, Riedl A, Moritzer E. Creep Effects of Thermoplastic Flange Systems. In: <i>Lecture Notes in Mechanical Engineering</i>. Springer Nature Switzerland; 2025. doi:<a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">10.1007/978-3-032-07392-1_39</a>","ieee":"F. Bartmann, A. Riedl, and E. Moritzer, “Creep Effects of Thermoplastic Flange Systems,” in <i>Lecture Notes in Mechanical Engineering</i>, Cham: Springer Nature Switzerland, 2025.","chicago":"Bartmann, Finn, Alexander Riedl, and Elmar Moritzer. “Creep Effects of Thermoplastic Flange Systems.” In <i>Lecture Notes in Mechanical Engineering</i>. Cham: Springer Nature Switzerland, 2025. <a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">https://doi.org/10.1007/978-3-032-07392-1_39</a>."},"_id":"63461","user_id":"59363","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"language":[{"iso":"eng"}],"type":"book_chapter","publication":"Lecture Notes in Mechanical Engineering","status":"public"},{"department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","_id":"63444","language":[{"iso":"ger"}],"keyword":["Plasma","Plasmaaktivierung","Werkzeugstahl"],"publication":"Magazin für Oberflächentechnik","type":"journal_article","status":"public","volume":2025,"author":[{"first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531"},{"first_name":"Dennis","full_name":"Rauen, Dennis","id":"62033","last_name":"Rauen"},{"last_name":"Hoppe","full_name":"Hoppe, Justin","first_name":"Justin"}],"date_created":"2026-01-05T08:42:56Z","date_updated":"2026-01-05T12:15:16Z","title":"Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften","issue":"10","intvolume":"      2025","citation":{"ama":"Moritzer E, Rauen D, Hoppe J. Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften. <i>Magazin für Oberflächentechnik</i>. 2025;2025(10).","chicago":"Moritzer, Elmar, Dennis Rauen, and Justin Hoppe. “Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften.” <i>Magazin für Oberflächentechnik</i> 2025, no. 10 (2025).","ieee":"E. Moritzer, D. Rauen, and J. Hoppe, “Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften,” <i>Magazin für Oberflächentechnik</i>, vol. 2025, no. 10, 2025.","short":"E. Moritzer, D. Rauen, J. Hoppe, Magazin für Oberflächentechnik 2025 (2025).","mla":"Moritzer, Elmar, et al. “Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften.” <i>Magazin für Oberflächentechnik</i>, vol. 2025, no. 10, 2025.","bibtex":"@article{Moritzer_Rauen_Hoppe_2025, title={Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften}, volume={2025}, number={10}, journal={Magazin für Oberflächentechnik}, author={Moritzer, Elmar and Rauen, Dennis and Hoppe, Justin}, year={2025} }","apa":"Moritzer, E., Rauen, D., &#38; Hoppe, J. (2025). Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften. <i>Magazin für Oberflächentechnik</i>, <i>2025</i>(10)."},"year":"2025"},{"year":"2025","citation":{"apa":"Moritzer, E., Brandes, P., Wittler, M., &#38; Westphal, M. S. (2025). A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES. <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>.","short":"E. Moritzer, P. Brandes, M. Wittler, M.S. Westphal, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025.","bibtex":"@inproceedings{Moritzer_Brandes_Wittler_Westphal_2025, title={A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES}, booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)}, author={Moritzer, Elmar and Brandes, Philipp and Wittler, Maurice and Westphal, Max Siegfried}, year={2025} }","mla":"Moritzer, Elmar, et al. “A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES.” <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>, 2025.","chicago":"Moritzer, Elmar, Philipp Brandes, Maurice Wittler, and Max Siegfried Westphal. “A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES.” In <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>, 2025.","ieee":"E. Moritzer, P. Brandes, M. Wittler, and M. S. Westphal, “A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES,” 2025.","ama":"Moritzer E, Brandes P, Wittler M, Westphal MS. A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES. In: <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>. ; 2025."},"date_updated":"2026-01-05T12:15:28Z","date_created":"2026-01-05T08:42:55Z","author":[{"last_name":"Moritzer","id":"20531","full_name":"Moritzer, Elmar","first_name":"Elmar"},{"last_name":"Brandes","orcid":"0009-0005-9707-0885","full_name":"Brandes, Philipp","id":"70091","first_name":"Philipp"},{"first_name":"Maurice","full_name":"Wittler, Maurice","id":"76071","last_name":"Wittler"},{"full_name":"Westphal, Max Siegfried","last_name":"Westphal","first_name":"Max Siegfried"}],"title":"A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES","type":"conference","publication":"Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)","status":"public","_id":"63442","user_id":"59363","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"keyword":["Faser-Kunststoff-Verbunde (FKV)","Faserverstärkte Kunststoffe (FVK)","Organobleche"],"language":[{"iso":"eng"}]},{"year":"2025","citation":{"mla":"Moritzer, Elmar, and Paul Leonhard Völklein. “Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren.” <i>Technomer 2025 29. Fachtagung</i>, 2025.","bibtex":"@inproceedings{Moritzer_Völklein_2025, title={Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren}, booktitle={Technomer 2025 29. Fachtagung}, author={Moritzer, Elmar and Völklein, Paul Leonhard}, year={2025} }","short":"E. Moritzer, P.L. Völklein, in: Technomer 2025 29. Fachtagung, 2025.","apa":"Moritzer, E., &#38; Völklein, P. L. (2025). Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren. <i>Technomer 2025 29. Fachtagung</i>.","ama":"Moritzer E, Völklein PL. Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren. In: <i>Technomer 2025 29. Fachtagung</i>. ; 2025.","chicago":"Moritzer, Elmar, and Paul Leonhard Völklein. “Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren.” In <i>Technomer 2025 29. Fachtagung</i>, 2025.","ieee":"E. Moritzer and P. L. Völklein, “Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren,” 2025."},"publication_identifier":{"isbn":["978-3-939382-17-1"]},"title":"Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren","date_updated":"2026-01-05T12:15:07Z","author":[{"first_name":"Elmar","full_name":"Moritzer, Elmar","id":"20531","last_name":"Moritzer"},{"id":"40735","full_name":"Völklein, Paul Leonhard","last_name":"Völklein","first_name":"Paul Leonhard"}],"date_created":"2026-01-05T10:21:46Z","status":"public","publication":"Technomer 2025 29. Fachtagung","type":"conference","keyword":["Faserverstärkte Kunststoffe (FVK)","mechanischens Fügen","Nieten","Organobleche"],"language":[{"iso":"ger"}],"_id":"63457","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363"},{"language":[{"iso":"eng"},{"iso":"ger"}],"keyword":["Schweißen","Ultraschall","weld seam quality"],"user_id":"59363","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"_id":"63455","status":"public","type":"journal_article","publication":"Joining Plastics","title":"Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen","date_created":"2026-01-05T10:21:46Z","author":[{"last_name":"Arndt","id":"45302","full_name":"Arndt, Theresa","first_name":"Theresa"},{"last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530","first_name":"Volker"}],"volume":19,"date_updated":"2026-01-05T12:15:10Z","citation":{"short":"T. Arndt, V. Schöppner, Joining Plastics 19 (2025) 166–174.","bibtex":"@article{Arndt_Schöppner_2025, title={Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen}, volume={19}, number={3–4}, journal={Joining Plastics}, author={Arndt, Theresa and Schöppner, Volker}, year={2025}, pages={166–174} }","mla":"Arndt, Theresa, and Volker Schöppner. “Ambossfreies Ultraschallschweißen Für Nur Einseitig Zugängliche Schweißsituationen.” <i>Joining Plastics</i>, vol. 19, no. 3–4, 2025, pp. 166–174.","apa":"Arndt, T., &#38; Schöppner, V. (2025). Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen. <i>Joining Plastics</i>, <i>19</i>(3–4), 166–174.","ama":"Arndt T, Schöppner V. Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen. <i>Joining Plastics</i>. 2025;19(3-4):166–174.","ieee":"T. Arndt and V. Schöppner, “Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen,” <i>Joining Plastics</i>, vol. 19, no. 3–4, pp. 166–174, 2025.","chicago":"Arndt, Theresa, and Volker Schöppner. “Ambossfreies Ultraschallschweißen Für Nur Einseitig Zugängliche Schweißsituationen.” <i>Joining Plastics</i> 19, no. 3–4 (2025): 166–174."},"intvolume":"        19","page":"166–174","year":"2025","issue":"3-4","quality_controlled":"1"},{"publication":"1. XXIV Dichtungskolloquium (Essen Juni 2025)","type":"journal_article","abstract":[{"text":"Externer Doktorand von Moritzer","lang":"eng"}],"status":"public","_id":"63456","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","language":[{"iso":"ger"}],"year":"2025","citation":{"apa":"Moritzer, E., Bartmann, F., &#38; Riedl, A. (2025). Berücksichtigung des Kriechverhaltens bei numerischen Simulationen von Thermoplastflanschverbindungen. <i>1. XXIV Dichtungskolloquium (Essen Juni 2025)</i>.","bibtex":"@article{Moritzer_Bartmann_Riedl_2025, title={Berücksichtigung des Kriechverhaltens bei numerischen Simulationen von Thermoplastflanschverbindungen}, journal={1. XXIV Dichtungskolloquium (Essen Juni 2025)}, author={Moritzer, Elmar and Bartmann, Finn and Riedl, Alexander}, year={2025} }","mla":"Moritzer, Elmar, et al. “Berücksichtigung des Kriechverhaltens bei numerischen Simulationen von Thermoplastflanschverbindungen.” <i>1. XXIV Dichtungskolloquium (Essen Juni 2025)</i>, 2025.","short":"E. Moritzer, F. Bartmann, A. Riedl, 1. XXIV Dichtungskolloquium (Essen Juni 2025) (2025).","ieee":"E. Moritzer, F. Bartmann, and A. Riedl, “Berücksichtigung des Kriechverhaltens bei numerischen Simulationen von Thermoplastflanschverbindungen,” <i>1. XXIV Dichtungskolloquium (Essen Juni 2025)</i>, 2025.","chicago":"Moritzer, Elmar, Finn Bartmann, and Alexander Riedl. “Berücksichtigung des Kriechverhaltens bei numerischen Simulationen von Thermoplastflanschverbindungen.” <i>1. XXIV Dichtungskolloquium (Essen Juni 2025)</i>, 2025.","ama":"Moritzer E, Bartmann F, Riedl A. Berücksichtigung des Kriechverhaltens bei numerischen Simulationen von Thermoplastflanschverbindungen. <i>1 XXIV Dichtungskolloquium (Essen Juni 2025)</i>. Published online 2025."},"date_updated":"2026-01-05T12:15:04Z","author":[{"full_name":"Moritzer, Elmar","id":"20531","last_name":"Moritzer","first_name":"Elmar"},{"first_name":"Finn","full_name":"Bartmann, Finn","last_name":"Bartmann"},{"full_name":"Riedl, Alexander","last_name":"Riedl","first_name":"Alexander"}],"date_created":"2026-01-05T10:21:46Z","title":"Berücksichtigung des Kriechverhaltens bei numerischen Simulationen von Thermoplastflanschverbindungen"},{"keyword":["Lackierung","Pulverlack","Spritzgießen"],"language":[{"iso":"eng"}],"_id":"63443","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","status":"public","publication":"Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)","type":"conference","title":"PROCESS DEVELOPMENT OF A POWDER-BASED DIRECT COATING IN THE INJECTION MOLDING PROCESS","date_updated":"2026-01-05T12:15:40Z","author":[{"last_name":"Moritzer","id":"20531","full_name":"Moritzer, Elmar","first_name":"Elmar"},{"first_name":"Kai","last_name":"Lingnau","full_name":"Lingnau, Kai"}],"date_created":"2026-01-05T08:42:56Z","year":"2025","citation":{"short":"E. Moritzer, K. Lingnau, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025.","bibtex":"@inproceedings{Moritzer_Lingnau_2025, title={PROCESS DEVELOPMENT OF A POWDER-BASED DIRECT COATING IN THE INJECTION MOLDING PROCESS}, booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)}, author={Moritzer, Elmar and Lingnau, Kai}, year={2025} }","mla":"Moritzer, Elmar, and Kai Lingnau. “PROCESS DEVELOPMENT OF A POWDER-BASED DIRECT COATING IN THE INJECTION MOLDING PROCESS.” <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>, 2025.","apa":"Moritzer, E., &#38; Lingnau, K. (2025). PROCESS DEVELOPMENT OF A POWDER-BASED DIRECT COATING IN THE INJECTION MOLDING PROCESS. <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>.","ama":"Moritzer E, Lingnau K. PROCESS DEVELOPMENT OF A POWDER-BASED DIRECT COATING IN THE INJECTION MOLDING PROCESS. In: <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>. ; 2025.","chicago":"Moritzer, Elmar, and Kai Lingnau. “PROCESS DEVELOPMENT OF A POWDER-BASED DIRECT COATING IN THE INJECTION MOLDING PROCESS.” In <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>, 2025.","ieee":"E. Moritzer and K. Lingnau, “PROCESS DEVELOPMENT OF A POWDER-BASED DIRECT COATING IN THE INJECTION MOLDING PROCESS,” 2025."},"quality_controlled":"1"},{"status":"public","type":"journal_article","publication":"Journal of Open Innovation: Technology, Market, and Complexity","article_number":"100469","article_type":"original","language":[{"iso":"eng"}],"_id":"58116","user_id":"103302","department":[{"_id":"9"},{"_id":"876"},{"_id":"321"}],"year":"2025","citation":{"short":"N. Mohammadian, O. Fatahi Valilai, A. Schlüter, Journal of Open Innovation: Technology, Market, and Complexity 11 (2025).","bibtex":"@article{Mohammadian_Fatahi Valilai_Schlüter_2025, title={Sustainable design and repair: Leveraging circular economy and machine learning for product development}, volume={11}, DOI={<a href=\"https://doi.org/10.1016/j.joitmc.2025.100469\">10.1016/j.joitmc.2025.100469</a>}, number={1100469}, journal={Journal of Open Innovation: Technology, Market, and Complexity}, publisher={Elsevier BV}, author={Mohammadian, Noushin and Fatahi Valilai, Omid and Schlüter, Alexander}, year={2025} }","mla":"Mohammadian, Noushin, et al. “Sustainable Design and Repair: Leveraging Circular Economy and Machine Learning for Product Development.” <i>Journal of Open Innovation: Technology, Market, and Complexity</i>, vol. 11, no. 1, 100469, Elsevier BV, 2025, doi:<a href=\"https://doi.org/10.1016/j.joitmc.2025.100469\">10.1016/j.joitmc.2025.100469</a>.","apa":"Mohammadian, N., Fatahi Valilai, O., &#38; Schlüter, A. (2025). Sustainable design and repair: Leveraging circular economy and machine learning for product development. <i>Journal of Open Innovation: Technology, Market, and Complexity</i>, <i>11</i>(1), Article 100469. <a href=\"https://doi.org/10.1016/j.joitmc.2025.100469\">https://doi.org/10.1016/j.joitmc.2025.100469</a>","ama":"Mohammadian N, Fatahi Valilai O, Schlüter A. Sustainable design and repair: Leveraging circular economy and machine learning for product development. <i>Journal of Open Innovation: Technology, Market, and Complexity</i>. 2025;11(1). doi:<a href=\"https://doi.org/10.1016/j.joitmc.2025.100469\">10.1016/j.joitmc.2025.100469</a>","ieee":"N. Mohammadian, O. Fatahi Valilai, and A. Schlüter, “Sustainable design and repair: Leveraging circular economy and machine learning for product development,” <i>Journal of Open Innovation: Technology, Market, and Complexity</i>, vol. 11, no. 1, Art. no. 100469, 2025, doi: <a href=\"https://doi.org/10.1016/j.joitmc.2025.100469\">10.1016/j.joitmc.2025.100469</a>.","chicago":"Mohammadian, Noushin, Omid Fatahi Valilai, and Alexander Schlüter. “Sustainable Design and Repair: Leveraging Circular Economy and Machine Learning for Product Development.” <i>Journal of Open Innovation: Technology, Market, and Complexity</i> 11, no. 1 (2025). <a href=\"https://doi.org/10.1016/j.joitmc.2025.100469\">https://doi.org/10.1016/j.joitmc.2025.100469</a>."},"intvolume":"        11","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2199-8531"]},"issue":"1","title":"Sustainable design and repair: Leveraging circular economy and machine learning for product development","doi":"10.1016/j.joitmc.2025.100469","publisher":"Elsevier BV","date_updated":"2026-01-06T07:51:27Z","date_created":"2025-01-09T08:30:23Z","author":[{"full_name":"Mohammadian, Noushin","last_name":"Mohammadian","first_name":"Noushin"},{"full_name":"Fatahi Valilai, Omid","last_name":"Fatahi Valilai","first_name":"Omid"},{"first_name":"Alexander","id":"103302","full_name":"Schlüter, Alexander","orcid":"0000-0002-2569-1624","last_name":"Schlüter"}],"volume":11},{"status":"public","type":"conference_abstract","publication":"SDEWES Conference 2025","language":[{"iso":"eng"}],"keyword":["5GDHC","district heating","DHC","waste heat","AI-Driven"],"user_id":"103302","department":[{"_id":"876"},{"_id":"321"},{"_id":"9"},{"_id":"393"}],"_id":"63019","citation":{"ieee":"J. A. T. Donner and A. Schlüter, “Development of an AI-driven decentralized control for fifth generation district heating and cooling networks,” presented at the 20th SDEWES Conference, Dubrovnik, 2025.","chicago":"Donner, Johannes Aurelius Tamino, and Alexander Schlüter. “Development of an AI-Driven Decentralized Control for Fifth Generation District Heating and Cooling Networks.” In <i>SDEWES Conference 2025</i>, 2025.","ama":"Donner JAT, Schlüter A. Development of an AI-driven decentralized control for fifth generation district heating and cooling networks. In: <i>SDEWES Conference 2025</i>. ; 2025.","apa":"Donner, J. A. T., &#38; Schlüter, A. (2025). Development of an AI-driven decentralized control for fifth generation district heating and cooling networks. <i>SDEWES Conference 2025</i>. 20th SDEWES Conference, Dubrovnik.","mla":"Donner, Johannes Aurelius Tamino, and Alexander Schlüter. “Development of an AI-Driven Decentralized Control for Fifth Generation District Heating and Cooling Networks.” <i>SDEWES Conference 2025</i>, 2025.","bibtex":"@inproceedings{Donner_Schlüter_2025, title={Development of an AI-driven decentralized control for fifth generation district heating and cooling networks}, booktitle={SDEWES Conference 2025}, author={Donner, Johannes Aurelius Tamino and Schlüter, Alexander}, year={2025} }","short":"J.A.T. Donner, A. Schlüter, in: SDEWES Conference 2025, 2025."},"year":"2025","conference":{"start_date":"05.10.2025","name":"20th SDEWES Conference","location":"Dubrovnik","end_date":"10.10.2025"},"title":"Development of an AI-driven decentralized control for fifth generation district heating and cooling networks","author":[{"first_name":"Johannes Aurelius Tamino","last_name":"Donner","orcid":"0009-0007-4757-4393","id":"72054","full_name":"Donner, Johannes Aurelius Tamino"},{"first_name":"Alexander","last_name":"Schlüter","orcid":"0000-0002-2569-1624","id":"103302","full_name":"Schlüter, Alexander"}],"date_created":"2025-12-10T12:30:59Z","date_updated":"2026-01-06T07:53:40Z"},{"status":"public","publication":"International Journal of Hydrogen Energy","type":"journal_article","language":[{"iso":"eng"}],"department":[{"_id":"876"},{"_id":"9"},{"_id":"393"},{"_id":"321"}],"user_id":"103302","_id":"59056","page":"558-576","intvolume":"       116","citation":{"bibtex":"@article{Seeger_Genovese_Schlüter_Kockel_Corigliano_Díaz Canales_Praktiknjo_Fragiacomo_2025, title={Techno-economic analysis of hydrogen and green fuels supply scenarios assessing three import routes: Canada, Chile, and Algeria to Germany}, volume={116}, DOI={<a href=\"https://doi.org/10.1016/j.ijhydene.2025.02.379\">10.1016/j.ijhydene.2025.02.379</a>}, journal={International Journal of Hydrogen Energy}, publisher={Elsevier BV}, author={Seeger, Karl and Genovese, Matteo and Schlüter, Alexander and Kockel, Christina and Corigliano, Orlando and Díaz Canales, Edith Benjamina and Praktiknjo, Aaron and Fragiacomo, Petronilla}, year={2025}, pages={558–576} }","mla":"Seeger, Karl, et al. “Techno-Economic Analysis of Hydrogen and Green Fuels Supply Scenarios Assessing Three Import Routes: Canada, Chile, and Algeria to Germany.” <i>International Journal of Hydrogen Energy</i>, vol. 116, Elsevier BV, 2025, pp. 558–76, doi:<a href=\"https://doi.org/10.1016/j.ijhydene.2025.02.379\">10.1016/j.ijhydene.2025.02.379</a>.","short":"K. Seeger, M. Genovese, A. Schlüter, C. Kockel, O. Corigliano, E.B. Díaz Canales, A. Praktiknjo, P. Fragiacomo, International Journal of Hydrogen Energy 116 (2025) 558–576.","apa":"Seeger, K., Genovese, M., Schlüter, A., Kockel, C., Corigliano, O., Díaz Canales, E. B., Praktiknjo, A., &#38; Fragiacomo, P. (2025). Techno-economic analysis of hydrogen and green fuels supply scenarios assessing three import routes: Canada, Chile, and Algeria to Germany. <i>International Journal of Hydrogen Energy</i>, <i>116</i>, 558–576. <a href=\"https://doi.org/10.1016/j.ijhydene.2025.02.379\">https://doi.org/10.1016/j.ijhydene.2025.02.379</a>","ama":"Seeger K, Genovese M, Schlüter A, et al. Techno-economic analysis of hydrogen and green fuels supply scenarios assessing three import routes: Canada, Chile, and Algeria to Germany. <i>International Journal of Hydrogen Energy</i>. 2025;116:558-576. doi:<a href=\"https://doi.org/10.1016/j.ijhydene.2025.02.379\">10.1016/j.ijhydene.2025.02.379</a>","chicago":"Seeger, Karl, Matteo Genovese, Alexander Schlüter, Christina Kockel, Orlando Corigliano, Edith Benjamina Díaz Canales, Aaron Praktiknjo, and Petronilla Fragiacomo. “Techno-Economic Analysis of Hydrogen and Green Fuels Supply Scenarios Assessing Three Import Routes: Canada, Chile, and Algeria to Germany.” <i>International Journal of Hydrogen Energy</i> 116 (2025): 558–76. <a href=\"https://doi.org/10.1016/j.ijhydene.2025.02.379\">https://doi.org/10.1016/j.ijhydene.2025.02.379</a>.","ieee":"K. Seeger <i>et al.</i>, “Techno-economic analysis of hydrogen and green fuels supply scenarios assessing three import routes: Canada, Chile, and Algeria to Germany,” <i>International Journal of Hydrogen Energy</i>, vol. 116, pp. 558–576, 2025, doi: <a href=\"https://doi.org/10.1016/j.ijhydene.2025.02.379\">10.1016/j.ijhydene.2025.02.379</a>."},"year":"2025","quality_controlled":"1","publication_identifier":{"issn":["0360-3199"]},"publication_status":"published","doi":"10.1016/j.ijhydene.2025.02.379","main_file_link":[{"open_access":"1","url":"https://doi.org/10.1016/j.ijhydene.2025.02.379"}],"title":"Techno-economic analysis of hydrogen and green fuels supply scenarios assessing three import routes: Canada, Chile, and Algeria to Germany","volume":116,"date_created":"2025-03-18T08:57:46Z","author":[{"last_name":"Seeger","full_name":"Seeger, Karl","first_name":"Karl"},{"full_name":"Genovese, Matteo","last_name":"Genovese","first_name":"Matteo"},{"first_name":"Alexander","id":"103302","full_name":"Schlüter, Alexander","orcid":"0000-0002-2569-1624","last_name":"Schlüter"},{"first_name":"Christina","last_name":"Kockel","full_name":"Kockel, Christina"},{"first_name":"Orlando","last_name":"Corigliano","full_name":"Corigliano, Orlando"},{"first_name":"Edith Benjamina","orcid":"0009-0007-2748-0074","last_name":"Díaz Canales","full_name":"Díaz Canales, Edith Benjamina","id":"105704"},{"full_name":"Praktiknjo, Aaron","last_name":"Praktiknjo","first_name":"Aaron"},{"first_name":"Petronilla","last_name":"Fragiacomo","full_name":"Fragiacomo, Petronilla"}],"publisher":"Elsevier BV","oa":"1","date_updated":"2026-01-06T08:01:01Z"},{"year":"2025","quality_controlled":"1","title":"Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills","publisher":"Elsevier","date_created":"2025-07-30T11:04:28Z","abstract":[{"text":"In light of growing demands for resource efficiency and sustainability in vehicle engineering, the environmentally compatible separation of structural adhesive joints is gaining increasing relevance. This study presents a comparative analysis of two physically based debonding methods: the established hot-air process and a cryogenic cold process based on liquid nitrogen (LN2). The primary objective is to assess the ecological impact and process-related sustainability of both approaches.\r\nExperimental investigations were conducted on a component-representative triple-sheet structure that simulates common automotive flange joints. Thermal input was applied either by convective heating using a hot air gun or by direct cooling through a contact-based LN2 tool. The resulting temperature profiles were recorded using spatially distributed thermocouples. Subsequently, the outer panel was selectively debonded to replicate a repair scenario, and the mechanical integrity of the remaining adhesive joint was evaluated through Mode I testing of L-shaped specimens. Process data served as input for an Life Cycle Assessment (LCA) according to DIN EN ISO 14040.\r\nThe cryogenic method achieved a 40% reduction in carbon footprint compared to the hot-air process (0.337 kg vs. 0.559 kg CO2-equivalents), primarily due to its shorter process time and more efficient heat transfer. While the hot-air method’s impact is mainly driven by electrical energy use, that of the cold method stems from cryogenic media consumption. Notwithstanding certain disadvantages in specific impact categories, the LN2-based process exhibits a superior overall ecological performance and signifies a promising solution for repair- and recycling-oriented adhesive separation in structural vehicle applications.","lang":"eng"}],"publication":"Journal of Advanced Joining Processes","keyword":["Sustainable debonding","Structural adhesives","Sustainable joining technologies","Life Cycle Assessment (LCA)","Automotive repair process","Economically efficient debonding"],"language":[{"iso":"eng"}],"citation":{"ama":"Jordan A, Hermelingmeier L, Gilich J, Meschut G, De Santis MS, Schlüter A. Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills. <i>Journal of Advanced Joining Processes</i>. 2025;12. doi:<a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">10.1016/j.jajp.2025.100332</a>","chicago":"Jordan, Alex, Lucas Hermelingmeier, Julian Gilich, Gerson Meschut, Marco Sebastian De Santis, and Alexander Schlüter. “Comparison of the Economic Efficiency and Sustainability of Two Debonding Processes for Structurally Bonded Sills.” <i>Journal of Advanced Joining Processes</i> 12 (2025). <a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">https://doi.org/10.1016/j.jajp.2025.100332</a>.","ieee":"A. Jordan, L. Hermelingmeier, J. Gilich, G. Meschut, M. S. De Santis, and A. Schlüter, “Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills,” <i>Journal of Advanced Joining Processes</i>, vol. 12, Art. no. 100332, 2025, doi: <a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">10.1016/j.jajp.2025.100332</a>.","apa":"Jordan, A., Hermelingmeier, L., Gilich, J., Meschut, G., De Santis, M. S., &#38; Schlüter, A. (2025). Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills. <i>Journal of Advanced Joining Processes</i>, <i>12</i>, Article 100332. <a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">https://doi.org/10.1016/j.jajp.2025.100332</a>","bibtex":"@article{Jordan_Hermelingmeier_Gilich_Meschut_De Santis_Schlüter_2025, title={Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills}, volume={12}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">10.1016/j.jajp.2025.100332</a>}, number={100332}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier}, author={Jordan, Alex and Hermelingmeier, Lucas and Gilich, Julian and Meschut, Gerson and De Santis, Marco Sebastian and Schlüter, Alexander}, year={2025} }","mla":"Jordan, Alex, et al. “Comparison of the Economic Efficiency and Sustainability of Two Debonding Processes for Structurally Bonded Sills.” <i>Journal of Advanced Joining Processes</i>, vol. 12, 100332, Elsevier, 2025, doi:<a href=\"https://doi.org/10.1016/j.jajp.2025.100332\">10.1016/j.jajp.2025.100332</a>.","short":"A. Jordan, L. Hermelingmeier, J. Gilich, G. Meschut, M.S. De Santis, A. Schlüter, Journal of Advanced Joining Processes 12 (2025)."},"intvolume":"        12","publication_status":"published","publication_identifier":{"issn":["2666-3309"]},"main_file_link":[{"url":"https://www.sciencedirect.com/science/article/pii/S2666330925000536?via%3Dihub","open_access":"1"}],"doi":"10.1016/j.jajp.2025.100332","date_updated":"2026-01-06T08:22:54Z","oa":"1","author":[{"last_name":"Jordan","orcid":"0009-0007-9546-6071","id":"62451","full_name":"Jordan, Alex","first_name":"Alex"},{"full_name":"Hermelingmeier, Lucas","id":"58649","last_name":"Hermelingmeier","first_name":"Lucas"},{"first_name":"Julian","full_name":"Gilich, Julian","id":"44391","last_name":"Gilich"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson","id":"32056"},{"last_name":"De Santis","id":"52239","full_name":"De Santis, Marco Sebastian","first_name":"Marco Sebastian"},{"last_name":"Schlüter","orcid":"0000-0002-2569-1624","full_name":"Schlüter, Alexander","id":"103302","first_name":"Alexander"}],"volume":12,"status":"public","type":"journal_article","article_type":"original","article_number":"100332","_id":"60837","user_id":"103302","department":[{"_id":"157"},{"_id":"876"},{"_id":"321"},{"_id":"9"}]},{"publication":"Journal of Sustainable Development Indicators","language":[{"iso":"eng"}],"issue":"2","quality_controlled":"1","year":"2025","date_created":"2025-07-21T09:04:07Z","publisher":"SDEWES Centre","title":"Implementing Strategic Environmental Assessment in the Global South, a Challenge: Nicaragua as a Case Study","type":"journal_article","status":"public","department":[{"_id":"9"},{"_id":"876"},{"_id":"321"},{"_id":"393"}],"user_id":"103302","_id":"60681","article_type":"original","publication_identifier":{"issn":["3044-5221"]},"publication_status":"published","page":"1-26","intvolume":"         1","citation":{"short":"E.B. Díaz Canales, A. Avila Galarza, S. Schlüter, E. Lacayo Escobar, A. Schlüter, Journal of Sustainable Development Indicators 1 (2025) 1–26.","mla":"Díaz Canales, Edith Benjamina, et al. “Implementing Strategic Environmental Assessment in the Global South, a Challenge: Nicaragua as a Case Study.” <i>Journal of Sustainable Development Indicators</i>, vol. 1, no. 2, SDEWES Centre, 2025, pp. 1–26, doi:<a href=\"https://doi.org/10.13044/j.sdi.d2.0592\">10.13044/j.sdi.d2.0592</a>.","bibtex":"@article{Díaz Canales_Avila Galarza_Schlüter_Lacayo Escobar_Schlüter_2025, title={Implementing Strategic Environmental Assessment in the Global South, a Challenge: Nicaragua as a Case Study}, volume={1}, DOI={<a href=\"https://doi.org/10.13044/j.sdi.d2.0592\">10.13044/j.sdi.d2.0592</a>}, number={2}, journal={Journal of Sustainable Development Indicators}, publisher={SDEWES Centre}, author={Díaz Canales, Edith Benjamina and Avila Galarza, Alfredo and Schlüter, Sabine and Lacayo Escobar, Erick and Schlüter, Alexander}, year={2025}, pages={1–26} }","apa":"Díaz Canales, E. B., Avila Galarza, A., Schlüter, S., Lacayo Escobar, E., &#38; Schlüter, A. (2025). Implementing Strategic Environmental Assessment in the Global South, a Challenge: Nicaragua as a Case Study. <i>Journal of Sustainable Development Indicators</i>, <i>1</i>(2), 1–26. <a href=\"https://doi.org/10.13044/j.sdi.d2.0592\">https://doi.org/10.13044/j.sdi.d2.0592</a>","ieee":"E. B. Díaz Canales, A. Avila Galarza, S. Schlüter, E. Lacayo Escobar, and A. Schlüter, “Implementing Strategic Environmental Assessment in the Global South, a Challenge: Nicaragua as a Case Study,” <i>Journal of Sustainable Development Indicators</i>, vol. 1, no. 2, pp. 1–26, 2025, doi: <a href=\"https://doi.org/10.13044/j.sdi.d2.0592\">10.13044/j.sdi.d2.0592</a>.","chicago":"Díaz Canales, Edith Benjamina, Alfredo Avila Galarza, Sabine Schlüter, Erick Lacayo Escobar, and Alexander Schlüter. “Implementing Strategic Environmental Assessment in the Global South, a Challenge: Nicaragua as a Case Study.” <i>Journal of Sustainable Development Indicators</i> 1, no. 2 (2025): 1–26. <a href=\"https://doi.org/10.13044/j.sdi.d2.0592\">https://doi.org/10.13044/j.sdi.d2.0592</a>.","ama":"Díaz Canales EB, Avila Galarza A, Schlüter S, Lacayo Escobar E, Schlüter A. Implementing Strategic Environmental Assessment in the Global South, a Challenge: Nicaragua as a Case Study. <i>Journal of Sustainable Development Indicators</i>. 2025;1(2):1-26. doi:<a href=\"https://doi.org/10.13044/j.sdi.d2.0592\">10.13044/j.sdi.d2.0592</a>"},"volume":1,"author":[{"first_name":"Edith Benjamina","full_name":"Díaz Canales, Edith Benjamina","id":"105704","orcid":"0009-0007-2748-0074","last_name":"Díaz Canales"},{"first_name":"Alfredo","last_name":"Avila Galarza","full_name":"Avila Galarza, Alfredo"},{"first_name":"Sabine","full_name":"Schlüter, Sabine","last_name":"Schlüter"},{"first_name":"Erick","last_name":"Lacayo Escobar","full_name":"Lacayo Escobar, Erick"},{"orcid":"0000-0002-2569-1624","last_name":"Schlüter","id":"103302","full_name":"Schlüter, Alexander","first_name":"Alexander"}],"date_updated":"2026-01-06T08:13:25Z","doi":"10.13044/j.sdi.d2.0592"},{"language":[{"iso":"eng"}],"department":[{"_id":"876"},{"_id":"321"},{"_id":"9"},{"_id":"393"}],"user_id":"103302","_id":"59841","status":"public","publication":"Accelerating the Transition to a Hydrogen Economy","type":"book_chapter","doi":"10.1016/b978-0-443-24002-7.00005-7","title":"Hydrogen economy development in the European Union","date_created":"2025-05-07T11:57:50Z","author":[{"last_name":"Genovese","full_name":"Genovese, Matteo","first_name":"Matteo"},{"first_name":"Francesco","last_name":"Piraino","full_name":"Piraino, Francesco"},{"full_name":"Corigliano, Orlando","last_name":"Corigliano","first_name":"Orlando"},{"id":"103302","full_name":"Schlüter, Alexander","last_name":"Schlüter","orcid":"0000-0002-2569-1624","first_name":"Alexander"},{"first_name":"Eugenio","full_name":"Scionti, Eugenio","last_name":"Scionti"},{"last_name":"Fragiacomo","full_name":"Fragiacomo, Petronilla","first_name":"Petronilla"}],"date_updated":"2026-01-06T08:23:15Z","publisher":"Elsevier","citation":{"apa":"Genovese, M., Piraino, F., Corigliano, O., Schlüter, A., Scionti, E., &#38; Fragiacomo, P. (2025). Hydrogen economy development in the European Union. In <i>Accelerating the Transition to a Hydrogen Economy</i>. Elsevier. <a href=\"https://doi.org/10.1016/b978-0-443-24002-7.00005-7\">https://doi.org/10.1016/b978-0-443-24002-7.00005-7</a>","bibtex":"@inbook{Genovese_Piraino_Corigliano_Schlüter_Scionti_Fragiacomo_2025, title={Hydrogen economy development in the European Union}, DOI={<a href=\"https://doi.org/10.1016/b978-0-443-24002-7.00005-7\">10.1016/b978-0-443-24002-7.00005-7</a>}, booktitle={Accelerating the Transition to a Hydrogen Economy}, publisher={Elsevier}, author={Genovese, Matteo and Piraino, Francesco and Corigliano, Orlando and Schlüter, Alexander and Scionti, Eugenio and Fragiacomo, Petronilla}, year={2025} }","short":"M. Genovese, F. Piraino, O. Corigliano, A. Schlüter, E. Scionti, P. Fragiacomo, in: Accelerating the Transition to a Hydrogen Economy, Elsevier, 2025.","mla":"Genovese, Matteo, et al. “Hydrogen Economy Development in the European Union.” <i>Accelerating the Transition to a Hydrogen Economy</i>, Elsevier, 2025, doi:<a href=\"https://doi.org/10.1016/b978-0-443-24002-7.00005-7\">10.1016/b978-0-443-24002-7.00005-7</a>.","chicago":"Genovese, Matteo, Francesco Piraino, Orlando Corigliano, Alexander Schlüter, Eugenio Scionti, and Petronilla Fragiacomo. “Hydrogen Economy Development in the European Union.” In <i>Accelerating the Transition to a Hydrogen Economy</i>. Elsevier, 2025. <a href=\"https://doi.org/10.1016/b978-0-443-24002-7.00005-7\">https://doi.org/10.1016/b978-0-443-24002-7.00005-7</a>.","ieee":"M. Genovese, F. Piraino, O. Corigliano, A. Schlüter, E. Scionti, and P. Fragiacomo, “Hydrogen economy development in the European Union,” in <i>Accelerating the Transition to a Hydrogen Economy</i>, Elsevier, 2025.","ama":"Genovese M, Piraino F, Corigliano O, Schlüter A, Scionti E, Fragiacomo P. Hydrogen economy development in the European Union. In: <i>Accelerating the Transition to a Hydrogen Economy</i>. Elsevier; 2025. doi:<a href=\"https://doi.org/10.1016/b978-0-443-24002-7.00005-7\">10.1016/b978-0-443-24002-7.00005-7</a>"},"year":"2025","publication_identifier":{"isbn":["9780443240027"]},"publication_status":"published"},{"year":"2025","page":"1-14","intvolume":"        41","citation":{"ama":"Landgräber J, Schöppner V, Brüning F. Assessing solids conveying in injection moulding machines using coupled numerical simulations based on the discrete element method (DEM) and multibody systems (MBS). <i>International Polymer Processing</i>. 2025;41(1):1-14. doi:<a href=\"https://doi.org/10.1515/ipp-2025-0065\">10.1515/ipp-2025-0065</a>","ieee":"J. Landgräber, V. Schöppner, and F. Brüning, “Assessing solids conveying in injection moulding machines using coupled numerical simulations based on the discrete element method (DEM) and multibody systems (MBS),” <i>International Polymer Processing</i>, vol. 41, no. 1, pp. 1–14, 2025, doi: <a href=\"https://doi.org/10.1515/ipp-2025-0065\">10.1515/ipp-2025-0065</a>.","chicago":"Landgräber, Jan, Volker Schöppner, and Florian Brüning. “Assessing Solids Conveying in Injection Moulding Machines Using Coupled Numerical Simulations Based on the Discrete Element Method (DEM) and Multibody Systems (MBS).” <i>International Polymer Processing</i> 41, no. 1 (2025): 1–14. <a href=\"https://doi.org/10.1515/ipp-2025-0065\">https://doi.org/10.1515/ipp-2025-0065</a>.","apa":"Landgräber, J., Schöppner, V., &#38; Brüning, F. (2025). Assessing solids conveying in injection moulding machines using coupled numerical simulations based on the discrete element method (DEM) and multibody systems (MBS). <i>International Polymer Processing</i>, <i>41</i>(1), 1–14. <a href=\"https://doi.org/10.1515/ipp-2025-0065\">https://doi.org/10.1515/ipp-2025-0065</a>","short":"J. Landgräber, V. Schöppner, F. Brüning, International Polymer Processing 41 (2025) 1–14.","mla":"Landgräber, Jan, et al. “Assessing Solids Conveying in Injection Moulding Machines Using Coupled Numerical Simulations Based on the Discrete Element Method (DEM) and Multibody Systems (MBS).” <i>International Polymer Processing</i>, vol. 41, no. 1, Walter de Gruyter GmbH, 2025, pp. 1–14, doi:<a href=\"https://doi.org/10.1515/ipp-2025-0065\">10.1515/ipp-2025-0065</a>.","bibtex":"@article{Landgräber_Schöppner_Brüning_2025, title={Assessing solids conveying in injection moulding machines using coupled numerical simulations based on the discrete element method (DEM) and multibody systems (MBS)}, volume={41}, DOI={<a href=\"https://doi.org/10.1515/ipp-2025-0065\">10.1515/ipp-2025-0065</a>}, number={1}, journal={International Polymer Processing}, publisher={Walter de Gruyter GmbH}, author={Landgräber, Jan and Schöppner, Volker and Brüning, Florian}, year={2025}, pages={1–14} }"},"quality_controlled":"1","publication_identifier":{"issn":["0930-777X","2195-8602"]},"publication_status":"published","issue":"1","title":"Assessing solids conveying in injection moulding machines using coupled numerical simulations based on the discrete element method (DEM) and multibody systems (MBS)","doi":"10.1515/ipp-2025-0065","date_updated":"2026-03-16T14:36:35Z","publisher":"Walter de Gruyter GmbH","volume":41,"author":[{"first_name":"Jan","full_name":"Landgräber, Jan","id":"64499","last_name":"Landgräber"},{"first_name":"Volker","id":"20530","full_name":"Schöppner, Volker","last_name":"Schöppner"},{"id":"72920","full_name":"Brüning, Florian","last_name":"Brüning","first_name":"Florian"}],"date_created":"2026-03-16T14:34:08Z","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n                  <jats:p>Design of single screw machines for polymer processing often focuses on the melt dominated areas of the screw. However, solids conveying is a key aspect for processes with high screw speeds, grooved feed sections, small screw diameters and material with low bulk density. In injection moulding, throughput limitations are highly relevant in packaging applications as due to low cooling times, plasticizing affects the cycle time. In addition, insufficient solids conveying is a primary cause for air residues in the melt and final product. Therefore, well-designed feed sections are required, especially as direct processing of regrind in recycling applications becomes more relevant due to governmental restrictions. Existing models for injection moulding are based on analytical equations and do not allow to assess new feed sections and feed opening designs, adapted to high screw speeds or regrind. In this paper, numerical simulations based on the Discrete Element Method (DEM), previously used in the field of extrusion, are carried out. In order to replicate the cyclic, superimposed rotation and translation of the screw, a coupled approach of DEM and Multibody Systems Simulation (MBS) is pursued. To verify the accuracy of such coupled simulations, a special test setup is added to a conventional injection moulding machine. Pure solids conveying is investigated, as DEM does not accommodate for large plastic deformations or melting. Different screw and intake designs as well as smooth and grooved barrels are investigated. Selected resins, pellet shapes and regrind are processed, varying the processing parameters and comparing the results to the simulation. The coupled approach replicates reality well in terms of throughput, confirming that DEM can be utilised to further investigate process phenomena and develop calculation models for solids conveying in injection moulding.</jats:p>","lang":"eng"}],"status":"public","publication":"International Polymer Processing","type":"journal_article","language":[{"iso":"eng"}],"_id":"65011","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363"},{"status":"public","type":"book_chapter","publication":"Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren","language":[{"iso":"eng"}],"keyword":["BMC","Duroplast","Kautschuk","Mehrkomponenten","Spritzgießen"],"user_id":"59363","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"_id":"64984","citation":{"ieee":"F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess,” in <i>Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren</i>, vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025, 2025, p. 25.","chicago":"Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Untersuchung von Kombinationen Aus Duroplasten Und Elastomeren Für Den Einstufigen 2K-Spritzgießprozess.” In <i>Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>, 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025:25, 2025.","ama":"Löhr F, Moritzer E, Klie B, Giese U. Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess. In: <i>Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>. Vol 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025. ; 2025:25.","apa":"Löhr, F., Moritzer, E., Klie, B., &#38; Giese, U. (2025). Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess. In <i>Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren: Vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025</i> (p. 25).","bibtex":"@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess}, volume={29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025}, booktitle={Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren}, author={Löhr, Florian and Moritzer, Elmar and Klie, Benjamin and Giese, Ulrich}, year={2025}, pages={25} }","mla":"Löhr, Florian, et al. “Untersuchung von Kombinationen Aus Duroplasten Und Elastomeren Für Den Einstufigen 2K-Spritzgießprozess.” <i>Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>, vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025, 2025, p. 25.","short":"F. Löhr, E. Moritzer, B. Klie, U. Giese, in: Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, 2025, p. 25."},"page":"25","year":"2025","conference":{"name":"Technomer 2025"},"title":"Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess","author":[{"first_name":"Florian","last_name":"Löhr","id":"68303","full_name":"Löhr, Florian"},{"first_name":"Elmar","last_name":"Moritzer","id":"20531","full_name":"Moritzer, Elmar"},{"first_name":"Benjamin","full_name":"Klie, Benjamin","last_name":"Klie"},{"last_name":"Giese","full_name":"Giese, Ulrich","first_name":"Ulrich"}],"date_created":"2026-03-16T12:20:49Z","volume":"29. Fachtagung über Verarbeitung und Anwendung von Polymeren -Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025","date_updated":"2026-03-18T09:06:05Z"},{"citation":{"mla":"Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten Und Kautschuk Im 2K-Spritzgießprozess.” <i>AZuR-Kolloquium 2025</i>, 2025.","short":"F. Löhr, in: AZuR-Kolloquium 2025, 2025.","bibtex":"@inproceedings{Löhr_2025, title={Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess}, booktitle={AZuR-Kolloquium 2025}, author={Löhr, Florian}, year={2025} }","apa":"Löhr, F. (2025). Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess. <i>AZuR-Kolloquium 2025</i>.","ama":"Löhr F. Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess. In: <i>AZuR-Kolloquium 2025</i>. ; 2025.","chicago":"Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten Und Kautschuk Im 2K-Spritzgießprozess.” In <i>AZuR-Kolloquium 2025</i>, 2025.","ieee":"F. Löhr, “Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess,” 2025."},"year":"2025","author":[{"id":"68303","full_name":"Löhr, Florian","last_name":"Löhr","first_name":"Florian"}],"date_created":"2026-03-16T13:51:45Z","date_updated":"2026-03-18T08:47:01Z","title":"Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess","type":"conference","publication":"AZuR-Kolloquium 2025","status":"public","user_id":"59363","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"_id":"64993","language":[{"iso":"eng"}]},{"conference":{"name":"International Rubber Conference IRC 2025"},"title":"Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process","date_created":"2026-03-16T12:20:49Z","author":[{"last_name":"Löhr","id":"68303","full_name":"Löhr, Florian","first_name":"Florian"},{"first_name":"Elmar","id":"20531","full_name":"Moritzer, Elmar","last_name":"Moritzer"},{"first_name":"Benjamin","last_name":"Klie","full_name":"Klie, Benjamin"},{"first_name":"Ulrich","last_name":"Giese","full_name":"Giese, Ulrich"}],"date_updated":"2026-03-18T09:07:10Z","page":"227–228","citation":{"apa":"Löhr, F., Moritzer, E., Klie, B., &#38; Giese, U. (2025). Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process. In <i>International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book</i> (pp. 227–228).","mla":"Löhr, Florian, et al. “Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process.” <i>International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book</i>, 2025, pp. 227–228.","short":"F. Löhr, E. Moritzer, B. Klie, U. Giese, in: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.","bibtex":"@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process}, booktitle={International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book}, author={Löhr, Florian and Moritzer, Elmar and Klie, Benjamin and Giese, Ulrich}, year={2025}, pages={227–228} }","ieee":"F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process,” in <i>International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book</i>, 2025, pp. 227–228.","chicago":"Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process.” In <i>International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book</i>, 227–228, 2025.","ama":"Löhr F, Moritzer E, Klie B, Giese U. Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process. In: <i>International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book</i>. ; 2025:227–228."},"year":"2025","quality_controlled":"1","language":[{"iso":"eng"}],"keyword":["BMC","Duroplast","Kautschuk","Mehrkomponenten","Spritzgießen"],"department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"59363","_id":"64983","status":"public","publication":"International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book","type":"book_chapter"},{"keyword":["CFD simulation","melting modeling","melting process","polymer extrusion","single-screw extruder"],"language":[{"iso":"eng"}],"_id":"65007","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","status":"public","publication":"International Polymer Processing","type":"journal_article","title":"Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations","doi":"10.1515/ipp-2025-0072","date_updated":"2026-03-18T09:17:45Z","date_created":"2026-03-16T14:23:34Z","author":[{"first_name":"Felix","id":"45124","full_name":"Knaup, Felix","last_name":"Knaup"},{"id":"20530","full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker"}],"year":"2025","citation":{"ama":"Knaup F, Schöppner V. Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations. <i>International Polymer Processing</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1515/ipp-2025-0072\">10.1515/ipp-2025-0072</a>","ieee":"F. Knaup and V. Schöppner, “Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations,” <i>International Polymer Processing</i>, 2025, doi: <a href=\"https://doi.org/10.1515/ipp-2025-0072\">10.1515/ipp-2025-0072</a>.","chicago":"Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase Simulation Model for Single-Screw Plasticizing Extruders Based on Experimental Investigations.” <i>International Polymer Processing</i>, 2025. <a href=\"https://doi.org/10.1515/ipp-2025-0072\">https://doi.org/10.1515/ipp-2025-0072</a>.","apa":"Knaup, F., &#38; Schöppner, V. (2025). Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations. <i>International Polymer Processing</i>. <a href=\"https://doi.org/10.1515/ipp-2025-0072\">https://doi.org/10.1515/ipp-2025-0072</a>","bibtex":"@article{Knaup_Schöppner_2025, title={Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations}, DOI={<a href=\"https://doi.org/10.1515/ipp-2025-0072\">10.1515/ipp-2025-0072</a>}, journal={International Polymer Processing}, author={Knaup, Felix and Schöppner, Volker}, year={2025} }","short":"F. Knaup, V. Schöppner, International Polymer Processing (2025).","mla":"Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase Simulation Model for Single-Screw Plasticizing Extruders Based on Experimental Investigations.” <i>International Polymer Processing</i>, 2025, doi:<a href=\"https://doi.org/10.1515/ipp-2025-0072\">10.1515/ipp-2025-0072</a>."},"quality_controlled":"1"},{"citation":{"short":"F. Knaup, F. Brüning, V. Schöppner, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025.","bibtex":"@inproceedings{Knaup_Brüning_Schöppner_2025, title={Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length}, booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)}, author={Knaup, Felix and Brüning, Florian and Schöppner, Volker}, year={2025} }","mla":"Knaup, Felix, et al. “Improving an Analytical Model of Melting in Single Screw Extruders Considering the Delay Zone Length.” <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>, 2025.","apa":"Knaup, F., Brüning, F., &#38; Schöppner, V. (2025). Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length. <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>.","ieee":"F. Knaup, F. Brüning, and V. Schöppner, “Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length,” 2025.","chicago":"Knaup, Felix, Florian Brüning, and Volker Schöppner. “Improving an Analytical Model of Melting in Single Screw Extruders Considering the Delay Zone Length.” In <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>, 2025.","ama":"Knaup F, Brüning F, Schöppner V. Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length. In: <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>. ; 2025."},"year":"2025","quality_controlled":"1","title":"Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length","date_created":"2026-03-16T14:23:34Z","author":[{"id":"45124","full_name":"Knaup, Felix","last_name":"Knaup","first_name":"Felix"},{"first_name":"Florian","full_name":"Brüning, Florian","last_name":"Brüning"},{"full_name":"Schöppner, Volker","id":"20530","last_name":"Schöppner","first_name":"Volker"}],"date_updated":"2026-03-18T09:23:35Z","status":"public","publication":"Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)","type":"conference","language":[{"iso":"eng"}],"keyword":["Aufschmelzen","Aufschmelzmodellierung","delay zone","extrusion","melting modeling"],"department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","_id":"65005"},{"status":"public","publication":"Technomer 2025 29. Fachtagung","type":"conference","language":[{"iso":"ger"}],"keyword":["Aufschmelzen","Aufschmelzmodellierung","Feststoffbett","melting modeling"],"department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","_id":"65006","citation":{"ieee":"F. Knaup, F. Brüning, and V. Schöppner, “Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder,” 2025.","chicago":"Knaup, Felix, Florian Brüning, and Volker Schöppner. “Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder.” In <i>Technomer 2025 29. Fachtagung</i>, 2025.","ama":"Knaup F, Brüning F, Schöppner V. Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. In: <i>Technomer 2025 29. Fachtagung</i>. ; 2025.","apa":"Knaup, F., Brüning, F., &#38; Schöppner, V. (2025). Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. <i>Technomer 2025 29. Fachtagung</i>.","mla":"Knaup, Felix, et al. “Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder.” <i>Technomer 2025 29. Fachtagung</i>, 2025.","short":"F. Knaup, F. Brüning, V. Schöppner, in: Technomer 2025 29. Fachtagung, 2025.","bibtex":"@inproceedings{Knaup_Brüning_Schöppner_2025, title={Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder}, booktitle={Technomer 2025 29. Fachtagung}, author={Knaup, Felix and Brüning, Florian and Schöppner, Volker}, year={2025} }"},"year":"2025","publication_identifier":{"isbn":["978-3-939382-17-1"]},"title":"Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder","date_created":"2026-03-16T14:23:34Z","author":[{"id":"45124","full_name":"Knaup, Felix","last_name":"Knaup","first_name":"Felix"},{"first_name":"Florian","last_name":"Brüning","full_name":"Brüning, Florian","id":"72920"},{"last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530","first_name":"Volker"}],"date_updated":"2026-03-18T09:11:44Z"}]