---
_id: '22044'
abstract:
- lang: eng
  text: Fused Deposition Modeling (FDM) is an Additive Manufacturing (AM) technology
    which is used for prototypes, single-part production and also small batch productions.
    For use as a final product, it is important that the parts have good mechanical
    properties, high dimensional accuracy and smooth surfaces. The knowledge of the
    mechanical properties is very important for the design engineer when it comes
    to the component design. End-use products out of the FDM process have to resist
    applied forces. In this paper, investigations were conducted with the polymer
    Polyamide 12 (FDM Nylon 12) from Stratasys Inc. This polymer can be processed
    with three different tip sizes resulting in different layer thicknesses from 178
    µm to 330 µm. Thus, the mechanical properties were determined for these layer
    thicknesses and for different orientations on the build platform. In addition
    to the mechanical properties the thermal properties (e.g. with a DSC analysis)
    are also investigated.
author:
- first_name: F.
  full_name: Knoop, F.
  last_name: Knoop
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Knoop F, Schöppner V. Mechanical and Thermal Properties of FDM Parts manufactured
    with Polyamide 12. In: <i>26th Annual International Solid Freeform Fabrication
    Symposium</i>. Vol 26. ; 2015:935-948. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf</a>'
  apa: Knoop, F., &#38; Schöppner, V. (2015). Mechanical and Thermal Properties of
    FDM Parts manufactured with Polyamide 12. <i>26th Annual International Solid Freeform
    Fabrication Symposium</i>, <i>26</i>, 935–948. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf</a>
  bibtex: '@inproceedings{Knoop_Schöppner_2015, title={Mechanical and Thermal Properties
    of FDM Parts manufactured with Polyamide 12}, volume={26}, DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf</a>},
    booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Knoop,
    F. and Schöppner, Volker}, year={2015}, pages={935–948} }'
  chicago: Knoop, F., and Volker Schöppner. “Mechanical and Thermal Properties of
    FDM Parts Manufactured with Polyamide 12.” In <i>26th Annual International Solid
    Freeform Fabrication Symposium</i>, 26:935–48, 2015. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf</a>.
  ieee: 'F. Knoop and V. Schöppner, “Mechanical and Thermal Properties of FDM Parts
    manufactured with Polyamide 12,” in <i>26th Annual International Solid Freeform
    Fabrication Symposium</i>, 2015, vol. 26, pp. 935–948, doi: <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf</a>.'
  mla: Knoop, F., and Volker Schöppner. “Mechanical and Thermal Properties of FDM
    Parts Manufactured with Polyamide 12.” <i>26th Annual International Solid Freeform
    Fabrication Symposium</i>, vol. 26, 2015, pp. 935–48, doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf</a>.
  short: 'F. Knoop, V. Schöppner, in: 26th Annual International Solid Freeform Fabrication
    Symposium, 2015, pp. 935–948.'
date_created: 2021-05-07T13:23:27Z
date_updated: 2022-01-06T06:55:23Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf
intvolume: '        26'
language:
- iso: eng
page: 935-948
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide
  12
type: conference
user_id: '70729'
volume: 26
year: '2015'
...
---
_id: '27328'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: C.
  full_name: Budde, C.
  last_name: Budde
- first_name: C.
  full_name: Leister, C.
  last_name: Leister
citation:
  ama: Moritzer E, Budde C, Leister C. Affect of Atmospheric Pressure Plasma Pre-Treatment
    and Aging Conditions on the Surface of Thermoplastics. <i>Welding in the World</i>.
    2014.
  apa: Moritzer, E., Budde, C., &#38; Leister, C. (2014). Affect of Atmospheric Pressure
    Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics. <i>Welding
    in the World</i>, <i>58</i>.
  bibtex: '@article{Moritzer_Budde_Leister_2014, title={Affect of Atmospheric Pressure
    Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics}, volume={58},
    journal={Welding in the World}, author={Moritzer, Elmar and Budde, C. and Leister,
    C.}, year={2014} }'
  chicago: Moritzer, Elmar, C. Budde, and C. Leister. “Affect of Atmospheric Pressure
    Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics.” <i>Welding
    in the World</i>, 2014.
  ieee: E. Moritzer, C. Budde, and C. Leister, “Affect of Atmospheric Pressure Plasma
    Pre-Treatment and Aging Conditions on the Surface of Thermoplastics,” <i>Welding
    in the World</i>, vol. 58, 2014.
  mla: Moritzer, Elmar, et al. “Affect of Atmospheric Pressure Plasma Pre-Treatment
    and Aging Conditions on the Surface of Thermoplastics.” <i>Welding in the World</i>,
    vol. 58, 2014.
  short: E. Moritzer, C. Budde, C. Leister, Welding in the World 58 (2014).
date_created: 2021-11-10T11:58:13Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
intvolume: '        58'
language:
- iso: eng
publication: Welding in the World
publication_date: '20140101'
publication_identifier:
  issn:
  - 0043-2288
status: public
title: Affect of Atmospheric Pressure Plasma Pre-Treatment and Aging Conditions on
  the Surface of Thermoplastics
type: newspaper_article
user_id: '44116'
volume: 58
year: '2014'
...
---
_id: '27330'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Y.
  full_name: Martin, Y.
  last_name: Martin
- first_name: E.
  full_name: Müller, E.
  last_name: Müller
- first_name: R.
  full_name: Kleeschulte, R.
  last_name: Kleeschulte
citation:
  ama: 'Moritzer E, Martin Y, Müller E, Kleeschulte R. Artificial Neural Networks
    to Model Formulation-Property Correlations in the Process of Inline-Compounding
    on an Injection Moulding Machine. In: <i>30th International Conference of the
    Polymer Processing Society (PPS)</i>. ; 2014.'
  apa: Moritzer, E., Martin, Y., Müller, E., &#38; Kleeschulte, R. (2014). Artificial
    Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding
    on an Injection Moulding Machine. <i>30th International Conference of the Polymer
    Processing Society (PPS)</i>. 30th International Conference of the Polymer Processing
    Society (PPS), Cleveland (USA).
  bibtex: '@inproceedings{Moritzer_Martin_Müller_Kleeschulte_2014, place={Cleveland
    (USA)}, title={Artificial Neural Networks to Model Formulation-Property Correlations
    in the Process of Inline-Compounding on an Injection Moulding Machine}, booktitle={30th
    International Conference of the Polymer Processing Society (PPS)}, author={Moritzer,
    Elmar and Martin, Y. and Müller, E. and Kleeschulte, R.}, year={2014} }'
  chicago: Moritzer, Elmar, Y. Martin, E. Müller, and R. Kleeschulte. “Artificial
    Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding
    on an Injection Moulding Machine.” In <i>30th International Conference of the
    Polymer Processing Society (PPS)</i>. Cleveland (USA), 2014.
  ieee: E. Moritzer, Y. Martin, E. Müller, and R. Kleeschulte, “Artificial Neural
    Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding
    on an Injection Moulding Machine,” presented at the 30th International Conference
    of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
  mla: Moritzer, Elmar, et al. “Artificial Neural Networks to Model Formulation-Property
    Correlations in the Process of Inline-Compounding on an Injection Moulding Machine.”
    <i>30th International Conference of the Polymer Processing Society (PPS)</i>,
    2014.
  short: 'E. Moritzer, Y. Martin, E. Müller, R. Kleeschulte, in: 30th International
    Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.'
conference:
  location: Cleveland (USA)
  name: 30th International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-10T12:03:30Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Cleveland (USA)
publication: 30th International Conference of the Polymer Processing Society (PPS)
status: public
title: Artificial Neural Networks to Model Formulation-Property Correlations in the
  Process of Inline-Compounding on an Injection Moulding Machine
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27331'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: N.
  full_name: Fecke, N.
  last_name: Fecke
- first_name: T.
  full_name: Herken, T.
  last_name: Herken
citation:
  ama: 'Schöppner V, Fecke N, Herken T. Analysis of the Material Degradation of PET
    on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures. In: <i>30th
    International Conference of the Polymer Processing Society (PPS)</i>. ; 2014.'
  apa: Schöppner, V., Fecke, N., &#38; Herken, T. (2014). Analysis of the Material
    Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures.
    <i>30th International Conference of the Polymer Processing Society (PPS)</i>.
    30th International Conference of the Polymer Processing Society (PPS), Cleveland
    (USA).
  bibtex: '@inproceedings{Schöppner_Fecke_Herken_2014, place={Cleveland (USA)}, title={Analysis
    of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying
    Vacuum Pressures}, booktitle={30th International Conference of the Polymer Processing
    Society (PPS)}, author={Schöppner, Volker and Fecke, N. and Herken, T.}, year={2014}
    }'
  chicago: Schöppner, Volker, N. Fecke, and T. Herken. “Analysis of the Material Degradation
    of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures.” In
    <i>30th International Conference of the Polymer Processing Society (PPS)</i>.
    Cleveland (USA), 2014.
  ieee: V. Schöppner, N. Fecke, and T. Herken, “Analysis of the Material Degradation
    of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures,” presented
    at the 30th International Conference of the Polymer Processing Society (PPS),
    Cleveland (USA), 2014.
  mla: Schöppner, Volker, et al. “Analysis of the Material Degradation of PET on a
    Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures.” <i>30th International
    Conference of the Polymer Processing Society (PPS)</i>, 2014.
  short: 'V. Schöppner, N. Fecke, T. Herken, in: 30th International Conference of
    the Polymer Processing Society (PPS), Cleveland (USA), 2014.'
conference:
  location: Cleveland (USA)
  name: 30th International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-10T12:07:41Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Cleveland (USA)
publication: 30th International Conference of the Polymer Processing Society (PPS)
status: public
title: Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder
  for Varying Vacuum Pressures
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27332'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: S.
  full_name: Littek, S.
  last_name: Littek
citation:
  ama: 'Schöppner V, Littek S. Berechnung des Materialabbaus von Thermoplasten während
    des Plastifiziervorgangs. In: <i>PolyMerTec 2014</i>. ; 2014.'
  apa: Schöppner, V., &#38; Littek, S. (2014). Berechnung des Materialabbaus von Thermoplasten
    während des Plastifiziervorgangs. <i>PolyMerTec 2014</i>. PolyMerTec 2014, Merseburg
    (Deutschland).
  bibtex: '@inproceedings{Schöppner_Littek_2014, place={Merseburg (Deutschland)},
    title={Berechnung des Materialabbaus von Thermoplasten während des Plastifiziervorgangs},
    booktitle={PolyMerTec 2014}, author={Schöppner, Volker and Littek, S.}, year={2014}
    }'
  chicago: Schöppner, Volker, and S. Littek. “Berechnung Des Materialabbaus von Thermoplasten
    Während Des Plastifiziervorgangs.” In <i>PolyMerTec 2014</i>. Merseburg (Deutschland),
    2014.
  ieee: V. Schöppner and S. Littek, “Berechnung des Materialabbaus von Thermoplasten
    während des Plastifiziervorgangs,” presented at the PolyMerTec 2014, Merseburg
    (Deutschland), 2014.
  mla: Schöppner, Volker, and S. Littek. “Berechnung Des Materialabbaus von Thermoplasten
    Während Des Plastifiziervorgangs.” <i>PolyMerTec 2014</i>, 2014.
  short: 'V. Schöppner, S. Littek, in: PolyMerTec 2014, Merseburg (Deutschland), 2014.'
conference:
  location: Merseburg (Deutschland)
  name: PolyMerTec 2014
date_created: 2021-11-10T12:10:46Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Merseburg (Deutschland)
publication: PolyMerTec 2014
status: public
title: Berechnung des Materialabbaus von Thermoplasten während des Plastifiziervorgangs
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27333'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: S.
  full_name: Seidel, S.
  last_name: Seidel
citation:
  ama: 'Moritzer E, Seidel S. Control of Heat Conduction Processes for the Improvement
    of Part Properties in the Two-Stage GITBlow Process. In: <i>72nd Annual Technical
    Conference of the Society of Plastics Engineers (ANTEC)</i>. ; 2014.'
  apa: Moritzer, E., &#38; Seidel, S. (2014). Control of Heat Conduction Processes
    for the Improvement of Part Properties in the Two-Stage GITBlow Process. <i>72nd
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>.
    72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC),
    Las Vegas (USA).
  bibtex: '@inproceedings{Moritzer_Seidel_2014, place={Las Vegas (USA)}, title={Control
    of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage
    GITBlow Process}, booktitle={72nd Annual Technical Conference of the Society of
    Plastics Engineers (ANTEC)}, author={Moritzer, Elmar and Seidel, S.}, year={2014}
    }'
  chicago: Moritzer, Elmar, and S. Seidel. “Control of Heat Conduction Processes for
    the Improvement of Part Properties in the Two-Stage GITBlow Process.” In <i>72nd
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>.
    Las Vegas (USA), 2014.
  ieee: E. Moritzer and S. Seidel, “Control of Heat Conduction Processes for the Improvement
    of Part Properties in the Two-Stage GITBlow Process,” presented at the 72nd Annual
    Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA),
    2014.
  mla: Moritzer, Elmar, and S. Seidel. “Control of Heat Conduction Processes for the
    Improvement of Part Properties in the Two-Stage GITBlow Process.” <i>72nd Annual
    Technical Conference of the Society of Plastics Engineers (ANTEC)</i>, 2014.
  short: 'E. Moritzer, S. Seidel, in: 72nd Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.'
conference:
  location: Las Vegas (USA)
  name: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-10T12:13:09Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Las Vegas (USA)
publication: 72nd Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: Control of Heat Conduction Processes for the Improvement of Part Properties
  in the Two-Stage GITBlow Process
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27334'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: F.
  full_name: Reinders, F.
  last_name: Reinders
citation:
  ama: 'Schöppner V, Reinders F. Development of Wood-Plastic Composites Based on Wood
    Particles and Dried Blood. In: <i>Biobased Materials 2014 - 10th Congress for
    Biobased Materials</i>. ; 2014.'
  apa: Schöppner, V., &#38; Reinders, F. (2014). Development of Wood-Plastic Composites
    Based on Wood Particles and Dried Blood. <i>Biobased Materials 2014 - 10th Congress
    for Biobased Materials</i>. Biobased materials 2014 - 10th Congress for Biobased
    Materials, Fellbach (Deutschland).
  bibtex: '@inproceedings{Schöppner_Reinders_2014, place={Fellbach (Deutschland)},
    title={Development of Wood-Plastic Composites Based on Wood Particles and Dried
    Blood}, booktitle={Biobased materials 2014 - 10th Congress for Biobased Materials},
    author={Schöppner, Volker and Reinders, F.}, year={2014} }'
  chicago: Schöppner, Volker, and F. Reinders. “Development of Wood-Plastic Composites
    Based on Wood Particles and Dried Blood.” In <i>Biobased Materials 2014 - 10th
    Congress for Biobased Materials</i>. Fellbach (Deutschland), 2014.
  ieee: V. Schöppner and F. Reinders, “Development of Wood-Plastic Composites Based
    on Wood Particles and Dried Blood,” presented at the Biobased materials 2014 -
    10th Congress for Biobased Materials, Fellbach (Deutschland), 2014.
  mla: Schöppner, Volker, and F. Reinders. “Development of Wood-Plastic Composites
    Based on Wood Particles and Dried Blood.” <i>Biobased Materials 2014 - 10th Congress
    for Biobased Materials</i>, 2014.
  short: 'V. Schöppner, F. Reinders, in: Biobased Materials 2014 - 10th Congress for
    Biobased Materials, Fellbach (Deutschland), 2014.'
conference:
  location: Fellbach (Deutschland)
  name: Biobased materials 2014 - 10th Congress for Biobased Materials
date_created: 2021-11-10T12:15:37Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Fellbach (Deutschland)
publication: Biobased materials 2014 - 10th Congress for Biobased Materials
status: public
title: Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27335'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
citation:
  ama: 'Moritzer E. Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges
    GITBlow. In: <i>WAK-Symposium</i>. ; 2014.'
  apa: Moritzer, E. (2014). Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges
    GITBlow. <i>WAK-Symposium</i>. WAK-Symposium, Karlsruhe (Deutschland).
  bibtex: '@inproceedings{Moritzer_2014, place={Karlsruhe (Deutschland)}, title={Die
    Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow}, booktitle={WAK-Symposium},
    author={Moritzer, Elmar}, year={2014} }'
  chicago: Moritzer, Elmar. “Die Spritzgießsonderverfahren GITBlow, GRIPBlow Und Einstufiges
    GITBlow.” In <i>WAK-Symposium</i>. Karlsruhe (Deutschland), 2014.
  ieee: E. Moritzer, “Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges
    GITBlow,” presented at the WAK-Symposium, Karlsruhe (Deutschland), 2014.
  mla: Moritzer, Elmar. “Die Spritzgießsonderverfahren GITBlow, GRIPBlow Und Einstufiges
    GITBlow.” <i>WAK-Symposium</i>, 2014.
  short: 'E. Moritzer, in: WAK-Symposium, Karlsruhe (Deutschland), 2014.'
conference:
  location: Karlsruhe (Deutschland)
  name: WAK-Symposium
date_created: 2021-11-10T12:20:34Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Karlsruhe (Deutschland)
publication: WAK-Symposium
status: public
title: Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27336'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: J.
  full_name: Krugmann, J.
  last_name: Krugmann
citation:
  ama: Moritzer E, Krugmann J. Entwicklung einer neuen mechanischen Befestigungslösung
    mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt. <i>Joining Plastics</i>.
    2014:178-182.
  apa: Moritzer, E., &#38; Krugmann, J. (2014). Entwicklung einer neuen mechanischen
    Befestigungslösung mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt.
    <i>Joining Plastics</i>, <i>8</i>(3), 178–182.
  bibtex: '@article{Moritzer_Krugmann_2014, title={Entwicklung einer neuen mechanischen
    Befestigungslösung mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt},
    volume={8}, number={3}, journal={Joining Plastics}, author={Moritzer, Elmar and
    Krugmann, J.}, year={2014}, pages={178–182} }'
  chicago: Moritzer, Elmar, and J. Krugmann. “Entwicklung einer neuen mechanischen
    Befestigungslösung mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt.”
    <i>Joining Plastics</i>, 2014.
  ieee: E. Moritzer and J. Krugmann, “Entwicklung einer neuen mechanischen Befestigungslösung
    mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt,” <i>Joining Plastics</i>,
    vol. 8, no. 3, pp. 178–182, 2014.
  mla: Moritzer, Elmar, and J. Krugmann. “Entwicklung einer neuen mechanischen Befestigungslösung
    mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt.” <i>Joining Plastics</i>,
    vol. 8, no. 3, 2014, pp. 178–82.
  short: E. Moritzer, J. Krugmann, Joining Plastics 8 (2014) 178–182.
date_created: 2021-11-10T12:23:43Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
intvolume: '         8'
issue: '3'
language:
- iso: ger
page: 178-182
publication: Joining Plastics
publication_date: '20140101'
publication_identifier:
  issn:
  - 1864-3450
status: public
title: Entwicklung einer neuen mechanischen Befestigungslösung mit gleichmäßig krafteinleitenden,
  dichtendem Hinterschnitt
type: newspaper_article
user_id: '44116'
volume: 8
year: '2014'
...
---
_id: '27337'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: T.
  full_name: Herken, T.
  last_name: Herken
- first_name: F.
  full_name: Reinders, F.
  last_name: Reinders
- first_name: K.
  full_name: Westhues, K.
  last_name: Westhues
citation:
  ama: 'Schöppner V, Herken T, Reinders F, Westhues K. Simulation des Compoundiervorgangs
    im Doppelschneckenextruder, Modellierung - Simulation - Auslegung. In: <i>Erfolgreich
    Compoundieren mit Pulvern und Stäuben</i>. ; 2014.'
  apa: Schöppner, V., Herken, T., Reinders, F., &#38; Westhues, K. (2014). Simulation
    des Compoundiervorgangs im Doppelschneckenextruder, Modellierung - Simulation
    - Auslegung. <i>Erfolgreich Compoundieren mit Pulvern und Stäuben</i>. Erfolgreich
    Compoundieren mit Pulvern und Stäuben, Düsseldorf (Deutschland).
  bibtex: '@inproceedings{Schöppner_Herken_Reinders_Westhues_2014, place={Düsseldorf
    (Deutschland)}, title={Simulation des Compoundiervorgangs im Doppelschneckenextruder,
    Modellierung - Simulation - Auslegung}, booktitle={Erfolgreich Compoundieren mit
    Pulvern und Stäuben}, author={Schöppner, Volker and Herken, T. and Reinders, F.
    and Westhues, K.}, year={2014} }'
  chicago: Schöppner, Volker, T. Herken, F. Reinders, and K. Westhues. “Simulation
    des Compoundiervorgangs im Doppelschneckenextruder, Modellierung - Simulation
    - Auslegung.” In <i>Erfolgreich Compoundieren mit Pulvern und Stäuben</i>. Düsseldorf
    (Deutschland), 2014.
  ieee: V. Schöppner, T. Herken, F. Reinders, and K. Westhues, “Simulation des Compoundiervorgangs
    im Doppelschneckenextruder, Modellierung - Simulation - Auslegung,” presented
    at the Erfolgreich Compoundieren mit Pulvern und Stäuben, Düsseldorf (Deutschland),
    2014.
  mla: Schöppner, Volker, et al. “Simulation des Compoundiervorgangs im Doppelschneckenextruder,
    Modellierung - Simulation - Auslegung.” <i>Erfolgreich Compoundieren mit Pulvern
    und Stäuben</i>, 2014.
  short: 'V. Schöppner, T. Herken, F. Reinders, K. Westhues, in: Erfolgreich Compoundieren
    mit Pulvern und Stäuben, Düsseldorf (Deutschland), 2014.'
conference:
  location: Düsseldorf (Deutschland)
  name: Erfolgreich Compoundieren mit Pulvern und Stäuben
date_created: 2021-11-10T12:28:07Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
language:
- iso: ger
place: Düsseldorf (Deutschland)
publication: Erfolgreich Compoundieren mit Pulvern und Stäuben
publication_identifier:
  isbn:
  - 978-3-18-234335-6
status: public
title: Simulation des Compoundiervorgangs im Doppelschneckenextruder, Modellierung
  - Simulation - Auslegung
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27338'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: N.
  full_name: Fecke, N.
  last_name: Fecke
- first_name: T.
  full_name: Herken, T.
  last_name: Herken
citation:
  ama: 'Schöppner V, Fecke N, Herken T. Experimental Analysis of the Material Degradation
    of PET on a Co-Rotating Twin-Screw Extruder. In: <i>72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC)</i>. ; 2014.'
  apa: Schöppner, V., Fecke, N., &#38; Herken, T. (2014). Experimental Analysis of
    the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder. <i>72nd
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>.
    72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC),
    Las Vegas (USA).
  bibtex: '@inproceedings{Schöppner_Fecke_Herken_2014, place={Las Vegas (USA)}, title={Experimental
    Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder},
    booktitle={72nd Annual Technical Conference of the Society of Plastics Engineers
    (ANTEC)}, author={Schöppner, Volker and Fecke, N. and Herken, T.}, year={2014}
    }'
  chicago: Schöppner, Volker, N. Fecke, and T. Herken. “Experimental Analysis of the
    Material Degradation of PET on a Co-Rotating Twin-Screw Extruder.” In <i>72nd
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>.
    Las Vegas (USA), 2014.
  ieee: V. Schöppner, N. Fecke, and T. Herken, “Experimental Analysis of the Material
    Degradation of PET on a Co-Rotating Twin-Screw Extruder,” presented at the 72nd
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las
    Vegas (USA), 2014.
  mla: Schöppner, Volker, et al. “Experimental Analysis of the Material Degradation
    of PET on a Co-Rotating Twin-Screw Extruder.” <i>72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC)</i>, 2014.
  short: 'V. Schöppner, N. Fecke, T. Herken, in: 72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.'
conference:
  location: Las Vegas (USA)
  name: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-10T12:30:40Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Las Vegas (USA)
publication: 72nd Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: Experimental Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw
  Extruder
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27339'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: G.
  full_name: Heiderich, G.
  last_name: Heiderich
citation:
  ama: 'Moritzer E, Heiderich G. Experimental Investigations of the Mechanical Recycling
    of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets
    by Injection Molding. In: <i>72nd Annual Technical Conference of the Society of
    Plastics Engineers (ANTEC)</i>. ; 2014.'
  apa: Moritzer, E., &#38; Heiderich, G. (2014). Experimental Investigations of the
    Mechanical Recycling of Offcuts from the Production of Continuous Fiber-Reinforced
    Thermoplastic Sheets by Injection Molding. <i>72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC)</i>. 72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Las Vegas (USA).
  bibtex: '@inproceedings{Moritzer_Heiderich_2014, place={Las Vegas (USA)}, title={Experimental
    Investigations of the Mechanical Recycling of Offcuts from the Production of Continuous
    Fiber-Reinforced Thermoplastic Sheets by Injection Molding}, booktitle={72nd Annual
    Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Moritzer,
    Elmar and Heiderich, G.}, year={2014} }'
  chicago: Moritzer, Elmar, and G. Heiderich. “Experimental Investigations of the
    Mechanical Recycling of Offcuts from the Production of Continuous Fiber-Reinforced
    Thermoplastic Sheets by Injection Molding.” In <i>72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC)</i>. Las Vegas (USA), 2014.
  ieee: E. Moritzer and G. Heiderich, “Experimental Investigations of the Mechanical
    Recycling of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic
    Sheets by Injection Molding,” presented at the 72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
  mla: Moritzer, Elmar, and G. Heiderich. “Experimental Investigations of the Mechanical
    Recycling of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic
    Sheets by Injection Molding.” <i>72nd Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC)</i>, 2014.
  short: 'E. Moritzer, G. Heiderich, in: 72nd Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.'
conference:
  location: Las Vegas (USA)
  name: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-10T12:39:46Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Las Vegas (USA)
publication: 72nd Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: Experimental Investigations of the Mechanical Recycling of Offcuts from the
  Production of Continuous Fiber-Reinforced Thermoplastic Sheets by Injection Molding
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27340'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: G.
  full_name: Heiderich, G.
  last_name: Heiderich
citation:
  ama: 'Moritzer E, Heiderich G. Experimental Investigations on Injection Molded Parts
    of Mechanically Recycled Offcuts from the Production of Continuous Fiber-Reinforced
    Thermoplastic Sheets. In: <i>58th Ilmenau Scientific Colloquium</i>. ; 2014.'
  apa: Moritzer, E., &#38; Heiderich, G. (2014). Experimental Investigations on Injection
    Molded Parts of Mechanically Recycled Offcuts from the Production of Continuous
    Fiber-Reinforced Thermoplastic Sheets. <i>58th Ilmenau Scientific Colloquium</i>.
    58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland).
  bibtex: '@inproceedings{Moritzer_Heiderich_2014, place={Ilmenau (Deutschland)},
    title={Experimental Investigations on Injection Molded Parts of Mechanically Recycled
    Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets},
    booktitle={58th Ilmenau Scientific Colloquium}, author={Moritzer, Elmar and Heiderich,
    G.}, year={2014} }'
  chicago: Moritzer, Elmar, and G. Heiderich. “Experimental Investigations on Injection
    Molded Parts of Mechanically Recycled Offcuts from the Production of Continuous
    Fiber-Reinforced Thermoplastic Sheets.” In <i>58th Ilmenau Scientific Colloquium</i>.
    Ilmenau (Deutschland), 2014.
  ieee: E. Moritzer and G. Heiderich, “Experimental Investigations on Injection Molded
    Parts of Mechanically Recycled Offcuts from the Production of Continuous Fiber-Reinforced
    Thermoplastic Sheets,” presented at the 58th Ilmenau Scientific Colloquium, Ilmenau
    (Deutschland), 2014.
  mla: Moritzer, Elmar, and G. Heiderich. “Experimental Investigations on Injection
    Molded Parts of Mechanically Recycled Offcuts from the Production of Continuous
    Fiber-Reinforced Thermoplastic Sheets.” <i>58th Ilmenau Scientific Colloquium</i>,
    2014.
  short: 'E. Moritzer, G. Heiderich, in: 58th Ilmenau Scientific Colloquium, Ilmenau
    (Deutschland), 2014.'
conference:
  location: Ilmenau (Deutschland)
  name: 58th Ilmenau Scientific Colloquium
date_created: 2021-11-10T12:42:48Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
language:
- iso: eng
place: Ilmenau (Deutschland)
publication: 58th Ilmenau Scientific Colloquium
status: public
title: Experimental Investigations on Injection Molded Parts of Mechanically Recycled
  Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27341'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: S.
  full_name: Brockhaus, S.
  last_name: Brockhaus
- first_name: B.
  full_name: Klie, B.
  last_name: Klie
- first_name: U.
  full_name: Giese, U.
  last_name: Giese
citation:
  ama: Schöppner V, Brockhaus S, Klie B, Giese U. Grundlegende Studie und alternative
    Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen.
    <i>KGK Kautschuk Gummi Kunststoffe</i>. 2014.
  apa: Schöppner, V., Brockhaus, S., Klie, B., &#38; Giese, U. (2014). Grundlegende
    Studie und alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen
    Kautschukmischungen. <i>KGK Kautschuk Gummi Kunststoffe</i>, <i>67</i>(11–12).
  bibtex: '@article{Schöppner_Brockhaus_Klie_Giese_2014, title={Grundlegende Studie
    und alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen},
    volume={67}, number={11–12}, journal={KGK Kautschuk Gummi Kunststoffe}, author={Schöppner,
    Volker and Brockhaus, S. and Klie, B. and Giese, U.}, year={2014} }'
  chicago: Schöppner, Volker, S. Brockhaus, B. Klie, and U. Giese. “Grundlegende Studie
    und alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen.”
    <i>KGK Kautschuk Gummi Kunststoffe</i>, 2014.
  ieee: V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Grundlegende Studie und
    alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen,”
    <i>KGK Kautschuk Gummi Kunststoffe</i>, vol. 67, no. 11–12, 2014.
  mla: Schöppner, Volker, et al. “Grundlegende Studie und alternative Methode zur
    Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen.” <i>KGK Kautschuk
    Gummi Kunststoffe</i>, vol. 67, no. 11–12, 2014.
  short: V. Schöppner, S. Brockhaus, B. Klie, U. Giese, KGK Kautschuk Gummi Kunststoffe
    67 (2014).
date_created: 2021-11-10T12:45:08Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
intvolume: '        67'
issue: 11-12
language:
- iso: ger
publication: KGK Kautschuk Gummi Kunststoffe
publication_date: '20140101'
publication_identifier:
  issn:
  - 0948-3276
status: public
title: Grundlegende Studie und alternative Methode zur Bewertung des Wandgleiteffekts
  bei hochviskosen Kautschukmischungen
type: newspaper_article
user_id: '44116'
volume: 67
year: '2014'
...
---
_id: '27342'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: N.
  full_name: Böhm, N.
  last_name: Böhm
citation:
  ama: 'Schöppner V, Böhm N. Herausforderungen bei der Verwendung von Wood-Plastic-Composites(WPC)
    im Automobilinnenbereich. In: <i>16th Workshop Odour and Emissions of Plastic
    Materials</i>. ; 2014.'
  apa: Schöppner, V., &#38; Böhm, N. (2014). Herausforderungen bei der Verwendung
    von Wood-Plastic-Composites(WPC) im Automobilinnenbereich. <i>16th Workshop Odour
    and Emissions of Plastic Materials</i>. 16th Workshop Odour and Emissions of Plastic
    Materials, Kassel (Deutschland).
  bibtex: '@inproceedings{Schöppner_Böhm_2014, place={Kassel (Deutschland)}, title={Herausforderungen
    bei der Verwendung von Wood-Plastic-Composites(WPC) im Automobilinnenbereich},
    booktitle={16th Workshop Odour and Emissions of Plastic Materials}, author={Schöppner,
    Volker and Böhm, N.}, year={2014} }'
  chicago: Schöppner, Volker, and N. Böhm. “Herausforderungen Bei Der Verwendung von
    Wood-Plastic-Composites(WPC) Im Automobilinnenbereich.” In <i>16th Workshop Odour
    and Emissions of Plastic Materials</i>. Kassel (Deutschland), 2014.
  ieee: V. Schöppner and N. Böhm, “Herausforderungen bei der Verwendung von Wood-Plastic-Composites(WPC)
    im Automobilinnenbereich,” presented at the 16th Workshop Odour and Emissions
    of Plastic Materials, Kassel (Deutschland), 2014.
  mla: Schöppner, Volker, and N. Böhm. “Herausforderungen Bei Der Verwendung von Wood-Plastic-Composites(WPC)
    Im Automobilinnenbereich.” <i>16th Workshop Odour and Emissions of Plastic Materials</i>,
    2014.
  short: 'V. Schöppner, N. Böhm, in: 16th Workshop Odour and Emissions of Plastic
    Materials, Kassel (Deutschland), 2014.'
conference:
  location: Kassel (Deutschland)
  name: 16th Workshop Odour and Emissions of Plastic Materials
date_created: 2021-11-10T12:47:38Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Kassel (Deutschland)
publication: 16th Workshop Odour and Emissions of Plastic Materials
status: public
title: Herausforderungen bei der Verwendung von Wood-Plastic-Composites(WPC) im Automobilinnenbereich
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27343'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: C.
  full_name: Budde, C.
  last_name: Budde
citation:
  ama: 'Moritzer E, Budde C. Hybrid Lightweight Construction of a Chassis Frame Structure.
    In: <i>Polymers and Energy</i>. ; 2014.'
  apa: Moritzer, E., &#38; Budde, C. (2014). Hybrid Lightweight Construction of a
    Chassis Frame Structure. <i>Polymers and Energy</i>. Polymers and Energy, Jena
    (Deutschland).
  bibtex: '@inproceedings{Moritzer_Budde_2014, place={Jena (Deutschland)}, title={Hybrid
    Lightweight Construction of a Chassis Frame Structure}, booktitle={Polymers and
    Energy}, author={Moritzer, Elmar and Budde, C.}, year={2014} }'
  chicago: Moritzer, Elmar, and C. Budde. “Hybrid Lightweight Construction of a Chassis
    Frame Structure.” In <i>Polymers and Energy</i>. Jena (Deutschland), 2014.
  ieee: E. Moritzer and C. Budde, “Hybrid Lightweight Construction of a Chassis Frame
    Structure,” presented at the Polymers and Energy, Jena (Deutschland), 2014.
  mla: Moritzer, Elmar, and C. Budde. “Hybrid Lightweight Construction of a Chassis
    Frame Structure.” <i>Polymers and Energy</i>, 2014.
  short: 'E. Moritzer, C. Budde, in: Polymers and Energy, Jena (Deutschland), 2014.'
conference:
  location: Jena (Deutschland)
  name: Polymers and Energy
date_created: 2021-11-10T12:49:41Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
language:
- iso: eng
place: Jena (Deutschland)
publication: Polymers and Energy
status: public
title: Hybrid Lightweight Construction of a Chassis Frame Structure
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27344'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: B.
  full_name: Henke, B.
  last_name: Henke
citation:
  ama: 'Schöppner V, Henke B. Illustration of Cross Flows of Polystyrene Melts Through
    a Coat-Hanger Die. In: <i>30th International Conference of the Polymer Processing
    Society (PPS)</i>. ; 2014.'
  apa: Schöppner, V., &#38; Henke, B. (2014). Illustration of Cross Flows of Polystyrene
    Melts Through a Coat-Hanger Die. <i>30th International Conference of the Polymer
    Processing Society (PPS)</i>. 30th International Conference of the Polymer Processing
    Society (PPS), Cleveland (USA).
  bibtex: '@inproceedings{Schöppner_Henke_2014, place={Cleveland (USA)}, title={Illustration
    of Cross Flows of Polystyrene Melts Through a Coat-Hanger Die}, booktitle={30th
    International Conference of the Polymer Processing Society (PPS)}, author={Schöppner,
    Volker and Henke, B.}, year={2014} }'
  chicago: Schöppner, Volker, and B. Henke. “Illustration of Cross Flows of Polystyrene
    Melts Through a Coat-Hanger Die.” In <i>30th International Conference of the Polymer
    Processing Society (PPS)</i>. Cleveland (USA), 2014.
  ieee: V. Schöppner and B. Henke, “Illustration of Cross Flows of Polystyrene Melts
    Through a Coat-Hanger Die,” presented at the 30th International Conference of
    the Polymer Processing Society (PPS), Cleveland (USA), 2014.
  mla: Schöppner, Volker, and B. Henke. “Illustration of Cross Flows of Polystyrene
    Melts Through a Coat-Hanger Die.” <i>30th International Conference of the Polymer
    Processing Society (PPS)</i>, 2014.
  short: 'V. Schöppner, B. Henke, in: 30th International Conference of the Polymer
    Processing Society (PPS), Cleveland (USA), 2014.'
conference:
  location: Cleveland (USA)
  name: 30th International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-10T12:53:31Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Cleveland (USA)
publication: 30th International Conference of the Polymer Processing Society (PPS)
status: public
title: Illustration of Cross Flows of Polystyrene Melts Through a Coat-Hanger Die
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27345'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: S.
  full_name: Seidel, S.
  last_name: Seidel
- first_name: S.
  full_name: Gövert, S.
  last_name: Gövert
- first_name: J.
  full_name: Schnieders, J.
  last_name: Schnieders
citation:
  ama: Moritzer E, Seidel S, Gövert S, Schnieders J. Im geschlossenen Werkzeug aufgeblasen.
    <i>Kunststoffe</i>. 2014.
  apa: Moritzer, E., Seidel, S., Gövert, S., &#38; Schnieders, J. (2014). Im geschlossenen
    Werkzeug aufgeblasen. <i>Kunststoffe</i>, <i>104</i>(5).
  bibtex: '@article{Moritzer_Seidel_Gövert_Schnieders_2014, title={Im geschlossenen
    Werkzeug aufgeblasen}, volume={104}, number={5}, journal={Kunststoffe}, author={Moritzer,
    Elmar and Seidel, S. and Gövert, S. and Schnieders, J.}, year={2014} }'
  chicago: Moritzer, Elmar, S. Seidel, S. Gövert, and J. Schnieders. “Im Geschlossenen
    Werkzeug Aufgeblasen.” <i>Kunststoffe</i>, 2014.
  ieee: E. Moritzer, S. Seidel, S. Gövert, and J. Schnieders, “Im geschlossenen Werkzeug
    aufgeblasen,” <i>Kunststoffe</i>, vol. 104, no. 5, 2014.
  mla: Moritzer, Elmar, et al. “Im Geschlossenen Werkzeug Aufgeblasen.” <i>Kunststoffe</i>,
    vol. 104, no. 5, 2014.
  short: E. Moritzer, S. Seidel, S. Gövert, J. Schnieders, Kunststoffe 104 (2014).
date_created: 2021-11-10T12:55:45Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
intvolume: '       104'
issue: '5'
language:
- iso: eng
publication: Kunststoffe
publication_date: '20140101'
publication_identifier:
  issn:
  - 0023-5563
status: public
title: Im geschlossenen Werkzeug aufgeblasen
type: newspaper_article
user_id: '44116'
volume: 104
year: '2014'
...
---
_id: '27346'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: F.
  full_name: Evers, F.
  last_name: Evers
citation:
  ama: 'Schöppner V, Evers F. Influence of Flame Retardant Material on the Weld Strength
    of Plastic Parts. In: <i>72nd Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC)</i>. ; 2014.'
  apa: Schöppner, V., &#38; Evers, F. (2014). Influence of Flame Retardant Material
    on the Weld Strength of Plastic Parts. <i>72nd Annual Technical Conference of
    the Society of Plastics Engineers (ANTEC)</i>. 72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Las Vegas (USA).
  bibtex: '@inproceedings{Schöppner_Evers_2014, place={Las Vegas (USA)}, title={Influence
    of Flame Retardant Material on the Weld Strength of Plastic Parts}, booktitle={72nd
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Schöppner,
    Volker and Evers, F.}, year={2014} }'
  chicago: Schöppner, Volker, and F. Evers. “Influence of Flame Retardant Material
    on the Weld Strength of Plastic Parts.” In <i>72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC)</i>. Las Vegas (USA), 2014.
  ieee: V. Schöppner and F. Evers, “Influence of Flame Retardant Material on the Weld
    Strength of Plastic Parts,” presented at the 72nd Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
  mla: Schöppner, Volker, and F. Evers. “Influence of Flame Retardant Material on
    the Weld Strength of Plastic Parts.” <i>72nd Annual Technical Conference of the
    Society of Plastics Engineers (ANTEC)</i>, 2014.
  short: 'V. Schöppner, F. Evers, in: 72nd Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.'
conference:
  location: Las Vegas (USA)
  name: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-10T12:57:30Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Las Vegas (USA)
publication: 72nd Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: Influence of Flame Retardant Material on the Weld Strength of Plastic Parts
type: conference
user_id: '44116'
year: '2014'
...
---
_id: '27347'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: S.
  full_name: Seidel, S.
  last_name: Seidel
citation:
  ama: 'Moritzer E, Seidel S. Influence of Process Parameters on Wall Thickness Distribution
    During the Initial Step of the Direct GITBlow Process. In: <i>30th International
    Conference of The Polymer Processing Society (PPS)</i>. ; 2014.'
  apa: Moritzer, E., &#38; Seidel, S. (2014). Influence of Process Parameters on Wall
    Thickness Distribution During the Initial Step of the Direct GITBlow Process.
    <i>30th International Conference of The Polymer Processing Society (PPS)</i>.
    30th International Conference of The Polymer Processing Society (PPS), Cleveland
    (USA).
  bibtex: '@inproceedings{Moritzer_Seidel_2014, place={Cleveland (USA)}, title={Influence
    of Process Parameters on Wall Thickness Distribution During the Initial Step of
    the Direct GITBlow Process}, booktitle={30th International Conference of The Polymer
    Processing Society (PPS)}, author={Moritzer, Elmar and Seidel, S.}, year={2014}
    }'
  chicago: Moritzer, Elmar, and S. Seidel. “Influence of Process Parameters on Wall
    Thickness Distribution During the Initial Step of the Direct GITBlow Process.”
    In <i>30th International Conference of The Polymer Processing Society (PPS)</i>.
    Cleveland (USA), 2014.
  ieee: E. Moritzer and S. Seidel, “Influence of Process Parameters on Wall Thickness
    Distribution During the Initial Step of the Direct GITBlow Process,” presented
    at the 30th International Conference of The Polymer Processing Society (PPS),
    Cleveland (USA), 2014.
  mla: Moritzer, Elmar, and S. Seidel. “Influence of Process Parameters on Wall Thickness
    Distribution During the Initial Step of the Direct GITBlow Process.” <i>30th International
    Conference of The Polymer Processing Society (PPS)</i>, 2014.
  short: 'E. Moritzer, S. Seidel, in: 30th International Conference of The Polymer
    Processing Society (PPS), Cleveland (USA), 2014.'
conference:
  location: Cleveland (USA)
  name: 30th International Conference of The Polymer Processing Society (PPS)
date_created: 2021-11-10T13:01:09Z
date_updated: 2022-01-06T06:57:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Cleveland (USA)
publication: 30th International Conference of The Polymer Processing Society (PPS)
status: public
title: Influence of Process Parameters on Wall Thickness Distribution During the Initial
  Step of the Direct GITBlow Process
type: conference
user_id: '44116'
year: '2014'
...