@inproceedings{26956,
  author       = {{Schöppner, Volker and Schumacher, C. and Fels, C.}},
  booktitle    = {{DVM Tagung - Additiv gefertigte Bauteile und Strukturen}},
  location     = {{Berlin (Deutschland)}},
  title        = {{{Materialschwindung und Verzug im FDM-Prozess}}},
  year         = {{2018}},
}

@article{26957,
  author       = {{Schöppner, Volker and Trippe, J.}},
  issn         = {{0930-777X}},
  journal      = {{International Polymer Processing}},
  number       = {{4}},
  title        = {{{Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds}}},
  volume       = {{33}},
  year         = {{2018}},
}

@inproceedings{26958,
  author       = {{Schöppner, Volker and Trippe, J.}},
  booktitle    = {{34th International Conference of the Polymer Processing Society (PPS)}},
  location     = {{Taipei (Taiwan)}},
  title        = {{{Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders}}},
  year         = {{2018}},
}

@inproceedings{26959,
  author       = {{Schöppner, Volker and Meilwes, P.}},
  booktitle    = {{76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}},
  location     = {{Orlando (USA)}},
  title        = {{{Modelling the Contamination Behavior of Polymer Melt Filters and Pressure Loss Simulations of Filtration Media}}},
  year         = {{2018}},
}

@inproceedings{26960,
  author       = {{Schöppner, Volker and Bayazian, H. and Hopp, Matthias and Yadegari, A.}},
  booktitle    = {{76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}},
  location     = {{Orlando (USA)}},
  title        = {{{Molecular Weight Distribution Prediction of Rheology against Gel Permeation Chromatography for Film Grade Polypropylene}}},
  year         = {{2018}},
}

@inproceedings{26962,
  author       = {{Schöppner, Volker and Sporkmann, F.}},
  booktitle    = {{34th International Conference of the Polymer Processing Society (PPS)}},
  location     = {{Taipei (Taiwan)}},
  title        = {{{New Method to Analyze the Throughput-Pressure Behavior with the Corrected Twin Screw Channel Geometry and the Induced Drag Flow of Screw Elements by Using 3D FEM Simulation}}},
  year         = {{2018}},
}

@inproceedings{26964,
  author       = {{Schöppner, Volker and Schumacher, C. and Gnaase, S.}},
  booktitle    = {{29th Annual International Solid Freeform Fabrication Symposium (SFF) - An Additive Manufacturing Conference}},
  location     = {{Austin (USA)}},
  title        = {{{Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process}}},
  year         = {{2018}},
}

@inproceedings{26965,
  author       = {{Schöppner, Volker and Walter, J.}},
  booktitle    = {{13. Kautschuk-Herbst-Kolloquium (KHK)}},
  location     = {{Hannover (Deutschland)}},
  title        = {{{Scale-Up of Garvey-Die Test Setup}}},
  year         = {{2018}},
}

@inproceedings{26966,
  author       = {{Schöppner, Volker and Walter, J.}},
  booktitle    = {{Deutsche Kautschuk-Tagung (DKT 2018)}},
  location     = {{Nürnberg (Deutschland)}},
  title        = {{{Scale-Up Regeln für Kautschukstiftextruder, Ansätze auf Basis einer konstanten Mischgüte}}},
  year         = {{2018}},
}

@article{26967,
  author       = {{Schöppner, Volker and Fiebig, I.}},
  issn         = {{1864-3450}},
  journal      = {{Joining Plastics}},
  number       = {{2}},
  pages        = {{87--93}},
  title        = {{{Schweißnahtfestigkeit von Sandwichbauteilen mit einer glasfaserverstärkten Kernkomponente}}},
  volume       = {{12}},
  year         = {{2018}},
}

@inproceedings{26968,
  author       = {{Schöppner, Volker and Resonnek, V.}},
  booktitle    = {{34th International Conference of the Polymer Processing Society (PPS)}},
  location     = {{Taipei (Taiwan)}},
  title        = {{{Self-Optimizing Barrel Temperature Setting Control of Single Screw Extruders for Improving the Melt Quality}}},
  year         = {{2018}},
}

@inproceedings{22020,
  abstract     = {{By adding fibers to a polymer matrix, a reinforcement of the material can be achieved. Short fiber-reinforced polymers can easily be processed by the Fused Deposition Modeling (FDM) process without major modifications to the processing machine. For instance,short fiber-reinforced filaments can be processed to produce short fiber-reinforced components in the FDM process. In many other additive manufacturing processes this is not possible at this low cost. The choice of the matrix material, fiber type, fiber length and fiber orientation have a major influence on the properties of the produced component. In this paper, short fiber-reinforced filaments are processed by the FDM process. The processing properties and the resulting part properties are investigated with regard to fiber-specific influences. Additionally, the effects of different strand geometries and thus changed flow fields on the fiber orientation and mechanical part properties are investigated.}},
  author       = {{Schumacher, C. and Schöppner, Volker and Gnaase, S.}},
  booktitle    = {{29th Annual International Solid Freeform Fabrication Symposium}},
  pages        = {{1112--1120}},
  title        = {{{Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process}}},
  doi          = {{http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf}},
  volume       = {{29}},
  year         = {{2018}},
}

@article{22034,
  author       = {{Knoop, F. and Köhler, M. and Lieneke, Tobias and Zimmer, Detmar and Schöppner, Volker}},
  issn         = {{07205953}},
  journal      = {{Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe}},
  pages        = {{83--88}},
  publisher    = {{VDI Fachmedien GmbH & Co. KG}},
  title        = {{{Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen}}},
  volume       = {{10}},
  year         = {{2018}},
}

@article{22035,
  author       = {{Knoop, F. and Lieneke, Tobias and Schöppner, Volker and Zimmer, Detmar}},
  issn         = {{0023-5563}},
  journal      = {{Kunststoffe}},
  pages        = {{70--73}},
  title        = {{{Additive Fertigung nach Maß}}},
  doi          = {{https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf}},
  volume       = {{6}},
  year         = {{2018}},
}

@inproceedings{22043,
  abstract     = {{By adding fibers to a polymer matrix, a reinforcement of the material can be achieved. Short fiber-reinforced polymers can easily be processed by the Fused Deposition Modeling (FDM) process without major modifications to the processing machine. For instance, short fiber-reinforcedfilaments can be processed to produce short fiber-reinforced components in the FDM process. In many other additive manufacturing processes this is not possible at this low cost. The choice of the matrix material, fiber type, fiber length and fiber orientation have a major influence on the properties of the produced component. In this paper, short fiber-reinforced filaments are processed by the FDM process. The processing properties and the resulting part properties are investigatedwith regard to fiber-specific influences. Additionally, the effects of different strand geometries and thus changed flow fields on the fiber orientation and mechanical part properties are investigated.}},
  author       = {{Schumacher, C. and Schöppner, Volker and Gnaase, S.}},
  booktitle    = {{29th Annual International Solid Freeform Fabrication Symposium}},
  pages        = {{1112--1120}},
  title        = {{{Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process}}},
  doi          = {{http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf}},
  volume       = {{29}},
  year         = {{2018}},
}

@inproceedings{22046,
  abstract     = {{The Fused Deposition Modeling (FDM) process by Stratasys is an additive manufacturing (AM) technique that can be used to produce complex thermoplastic parts without the need of a forming tool. A big challenge of this process is that there are several influencing factors with unknown effect on the resulting part properties. One of these factors is the layer time. The aim of this study is to examine the influence of the layer time on the resulting dimensional accuracy and mechanical properties of FDM components manufactured with the amorphous polymer ABS-M30. For this purpose a special job layout was designed to vary the layer time within a certain range. The investigations in this paper show a significant influence on the dimensional accuracy and also on the mechanical properties.}},
  author       = {{Knoop, F. and Schöppner, Volker}},
  booktitle    = {{SPE ANTEC 2018}},
  isbn         = {{978-1-7138-0197-9}},
  publisher    = {{Society of Plastics Engineers }},
  title        = {{{Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process}}},
  doi          = {{https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301}},
  volume       = {{1}},
  year         = {{2018}},
}

@inproceedings{26954,
  author       = {{Schöppner, Volker and Schadomsky, Michael and Stüker, Daniel}},
  booktitle    = {{Deutsche Kautschuk-Tagung (DKT 2018)}},
  location     = {{Nürnberg (Deutschland)}},
  title        = {{{Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity}}},
  year         = {{2018}},
}

@article{26943,
  author       = {{Schöppner, Volker and Knoop, F. and Köhler, M. and Lieneke, Tobias and Zimmer, Detmar}},
  issn         = {{0720-5953}},
  journal      = {{Konstruktion}},
  pages        = {{83--88}},
  title        = {{{Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen}}},
  volume       = {{70. Jg. Heft 10}},
  year         = {{2018}},
}

@article{26930,
  author       = {{Schöppner, Volker and Zimmer, Detmar and Knoop, Frederick and Lieneke, Tobias}},
  journal      = {{Kunststoffe}},
  title        = {{{Additive Fertigung nach Maß}}},
  volume       = {{108. Jg. Heft 6}},
  year         = {{2018}},
}

@article{26932,
  author       = {{Schöppner, Volker and Lakemeyer, Patrick and Geißler, Bastian and Laumer, Tobias and Wübbeke, Andrea and Frick, Thomas}},
  journal      = {{Journal of Laser Applications}},
  title        = {{{Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths}}},
  volume       = {{30. Jg.}},
  year         = {{2018}},
}