[{"_id":"27263","language":[{"iso":"eng"}],"user_id":"44116","conference":{"location":"Lyon (Frankreich)","name":"32nd International Conference of the Polymer Processing Society (PPS)"},"author":[{"id":"20530","full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner"},{"full_name":"Trippe, J.","last_name":"Trippe","first_name":"J."}],"title":"Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method","year":"2016","status":"public","date_updated":"2022-01-06T06:57:37Z","place":"Lyon (Frankreich)","date_created":"2021-11-08T10:36:19Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"conference","citation":{"short":"V. Schöppner, J. Trippe, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.","chicago":"Schöppner, Volker, and J. Trippe. “Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method.” In <i>32nd International Conference of the Polymer Processing Society (PPS)</i>. Lyon (Frankreich), 2016.","apa":"Schöppner, V., &#38; Trippe, J. (2016). Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method. <i>32nd International Conference of the Polymer Processing Society (PPS)</i>. 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).","ieee":"V. Schöppner and J. Trippe, “Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.","ama":"Schöppner V, Trippe J. Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method. In: <i>32nd International Conference of the Polymer Processing Society (PPS)</i>. ; 2016.","bibtex":"@inproceedings{Schöppner_Trippe_2016, place={Lyon (Frankreich)}, title={Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method}, booktitle={32nd International Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker and Trippe, J.}, year={2016} }","mla":"Schöppner, Volker, and J. Trippe. “Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method.” <i>32nd International Conference of the Polymer Processing Society (PPS)</i>, 2016."},"publication":"32nd International Conference of the Polymer Processing Society (PPS)"},{"author":[{"id":"20530","last_name":"Schöppner","first_name":"Volker","full_name":"Schöppner, Volker"},{"full_name":"Westhues, K.","first_name":"K.","last_name":"Westhues"},{"full_name":"Westhues, T.","last_name":"Westhues","first_name":"T."}],"conference":{"name":"74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)","location":"Indianapolis (USA)"},"title":"Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders","status":"public","year":"2016","date_updated":"2022-01-06T06:57:37Z","_id":"27265","language":[{"iso":"eng"}],"user_id":"44116","citation":{"bibtex":"@inproceedings{Schöppner_Westhues_Westhues_2016, place={Indianapolis (USA)}, title={Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders}, booktitle={74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Schöppner, Volker and Westhues, K. and Westhues, T.}, year={2016} }","ama":"Schöppner V, Westhues K, Westhues T. Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders. In: <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. ; 2016.","mla":"Schöppner, Volker, et al. “Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders.” <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>, 2016.","short":"V. Schöppner, K. Westhues, T. Westhues, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.","chicago":"Schöppner, Volker, K. Westhues, and T. Westhues. “Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders.” In <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. Indianapolis (USA), 2016.","ieee":"V. Schöppner, K. Westhues, and T. Westhues, “Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.","apa":"Schöppner, V., Westhues, K., &#38; Westhues, T. (2016). Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders. <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA)."},"publication":"74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)","date_created":"2021-11-08T10:40:11Z","place":"Indianapolis (USA)","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"conference"},{"publication":"PolyMerTec 2016","citation":{"chicago":"Schöppner, Volker, P. Kloke, and K. Westhues. “Modellierung Des Glasfaserlängenabbaus.” In <i>PolyMerTec 2016</i>. Merseburg (Deutschland), 2016.","short":"V. Schöppner, P. Kloke, K. Westhues, in: PolyMerTec 2016, Merseburg (Deutschland), 2016.","apa":"Schöppner, V., Kloke, P., &#38; Westhues, K. (2016). Modellierung des Glasfaserlängenabbaus. <i>PolyMerTec 2016</i>. PolyMerTec 2016, Merseburg (Deutschland).","ieee":"V. Schöppner, P. Kloke, and K. Westhues, “Modellierung des Glasfaserlängenabbaus,” presented at the PolyMerTec 2016, Merseburg (Deutschland), 2016.","ama":"Schöppner V, Kloke P, Westhues K. Modellierung des Glasfaserlängenabbaus. In: <i>PolyMerTec 2016</i>. ; 2016.","bibtex":"@inproceedings{Schöppner_Kloke_Westhues_2016, place={Merseburg (Deutschland)}, title={Modellierung des Glasfaserlängenabbaus}, booktitle={PolyMerTec 2016}, author={Schöppner, Volker and Kloke, P. and Westhues, K.}, year={2016} }","mla":"Schöppner, Volker, et al. “Modellierung Des Glasfaserlängenabbaus.” <i>PolyMerTec 2016</i>, 2016."},"type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"place":"Merseburg (Deutschland)","date_created":"2021-11-08T10:41:48Z","date_updated":"2022-01-06T06:57:37Z","year":"2016","title":"Modellierung des Glasfaserlängenabbaus","status":"public","conference":{"name":"PolyMerTec 2016","location":"Merseburg (Deutschland)"},"author":[{"id":"20530","full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner"},{"first_name":"P.","last_name":"Kloke","full_name":"Kloke, P."},{"first_name":"K.","last_name":"Westhues","full_name":"Westhues, K."}],"user_id":"44116","language":[{"iso":"eng"}],"_id":"27266"},{"_id":"27268","language":[{"iso":"eng"}],"user_id":"44116","year":"2016","title":"Non-Destructive Characterization of Hygrothermally Aged Polymers","status":"public","author":[{"full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner","id":"20530"},{"first_name":"M.","last_name":"Hüttner","full_name":"Hüttner, M."},{"last_name":"Henning","first_name":"Bernd","full_name":"Henning, Bernd","id":"213"},{"full_name":"Webersen, Manuel","first_name":"Manuel","orcid":"0000-0001-6411-4232","last_name":"Webersen","id":"11289"}],"conference":{"name":"74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)","location":"Indianapolis (USA)"},"date_updated":"2022-01-06T06:57:37Z","date_created":"2021-11-08T10:46:10Z","place":"Indianapolis (USA)","type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"publication":"74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)","citation":{"apa":"Schöppner, V., Hüttner, M., Henning, B., &#38; Webersen, M. (2016). Non-Destructive Characterization of Hygrothermally Aged Polymers. <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA).","ieee":"V. Schöppner, M. Hüttner, B. Henning, and M. Webersen, “Non-Destructive Characterization of Hygrothermally Aged Polymers,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.","short":"V. Schöppner, M. Hüttner, B. Henning, M. Webersen, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.","chicago":"Schöppner, Volker, M. Hüttner, Bernd Henning, and Manuel Webersen. “Non-Destructive Characterization of Hygrothermally Aged Polymers.” In <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. Indianapolis (USA), 2016.","mla":"Schöppner, Volker, et al. “Non-Destructive Characterization of Hygrothermally Aged Polymers.” <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>, 2016.","ama":"Schöppner V, Hüttner M, Henning B, Webersen M. Non-Destructive Characterization of Hygrothermally Aged Polymers. In: <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. ; 2016.","bibtex":"@inproceedings{Schöppner_Hüttner_Henning_Webersen_2016, place={Indianapolis (USA)}, title={Non-Destructive Characterization of Hygrothermally Aged Polymers}, booktitle={74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Schöppner, Volker and Hüttner, M. and Henning, Bernd and Webersen, Manuel}, year={2016} }"}},{"type":"journal_article","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2021-11-08T10:54:03Z","publication":"Kunststoffe","citation":{"ieee":"V. Schöppner, T. Herken, F. Sporkmann, and F. Platte, “Partikel und Schmelze im dynamischen Netz,” <i>Kunststoffe</i>, pp. 70–75, 2016.","apa":"Schöppner, V., Herken, T., Sporkmann, F., &#38; Platte, F. (2016). Partikel und Schmelze im dynamischen Netz. <i>Kunststoffe</i>, 70–75.","short":"V. Schöppner, T. Herken, F. Sporkmann, F. Platte, Kunststoffe (2016) 70–75.","chicago":"Schöppner, Volker, T. Herken, F. Sporkmann, and F. Platte. “Partikel Und Schmelze Im Dynamischen Netz.” <i>Kunststoffe</i>, 2016, 70–75.","mla":"Schöppner, Volker, et al. “Partikel Und Schmelze Im Dynamischen Netz.” <i>Kunststoffe</i>, 2016, pp. 70–75.","bibtex":"@article{Schöppner_Herken_Sporkmann_Platte_2016, title={Partikel und Schmelze im dynamischen Netz}, journal={Kunststoffe}, author={Schöppner, Volker and Herken, T. and Sporkmann, F. and Platte, F.}, year={2016}, pages={70–75} }","ama":"Schöppner V, Herken T, Sporkmann F, Platte F. Partikel und Schmelze im dynamischen Netz. <i>Kunststoffe</i>. Published online 2016:70-75."},"user_id":"44116","page":"70-75","_id":"27270","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:57:37Z","title":"Partikel und Schmelze im dynamischen Netz","status":"public","year":"2016","publication_identifier":{"issn":["0023-5563"]},"author":[{"first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530"},{"full_name":"Herken, T.","first_name":"T.","last_name":"Herken"},{"last_name":"Sporkmann","first_name":"F.","full_name":"Sporkmann, F."},{"last_name":"Platte","first_name":"F.","full_name":"Platte, F."}]},{"author":[{"id":"20531","first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar"},{"full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner","id":"20530"},{"last_name":"Lakemeyer","first_name":"P.","full_name":"Lakemeyer, P."},{"full_name":"Nordmeyer, T.","first_name":"T.","last_name":"Nordmeyer"}],"publication_identifier":{"issn":["1864-3450"]},"year":"2016","status":"public","title":"Plasmaunterstütztes Fügen von Kunststoffen","date_updated":"2022-01-06T06:57:37Z","_id":"27271","language":[{"iso":"eng"}],"page":"100-108","user_id":"44116","citation":{"ieee":"E. Moritzer, V. Schöppner, P. Lakemeyer, and T. Nordmeyer, “Plasmaunterstütztes Fügen von Kunststoffen,” <i>Joining Plastics</i>, no. 10. Jg. Heft 2, pp. 100–108, 2016.","apa":"Moritzer, E., Schöppner, V., Lakemeyer, P., &#38; Nordmeyer, T. (2016). Plasmaunterstütztes Fügen von Kunststoffen. <i>Joining Plastics</i>, <i>10. Jg. Heft 2</i>, 100–108.","chicago":"Moritzer, Elmar, Volker Schöppner, P. Lakemeyer, and T. Nordmeyer. “Plasmaunterstütztes Fügen von Kunststoffen.” <i>Joining Plastics</i>, no. 10. Jg. Heft 2 (2016): 100–108.","short":"E. Moritzer, V. Schöppner, P. Lakemeyer, T. Nordmeyer, Joining Plastics (2016) 100–108.","mla":"Moritzer, Elmar, et al. “Plasmaunterstütztes Fügen von Kunststoffen.” <i>Joining Plastics</i>, no. 10. Jg. Heft 2, 2016, pp. 100–08.","bibtex":"@article{Moritzer_Schöppner_Lakemeyer_Nordmeyer_2016, title={Plasmaunterstütztes Fügen von Kunststoffen}, number={10. Jg. Heft 2}, journal={Joining Plastics}, author={Moritzer, Elmar and Schöppner, Volker and Lakemeyer, P. and Nordmeyer, T.}, year={2016}, pages={100–108} }","ama":"Moritzer E, Schöppner V, Lakemeyer P, Nordmeyer T. Plasmaunterstütztes Fügen von Kunststoffen. <i>Joining Plastics</i>. 2016;(10. Jg. Heft 2):100-108."},"publication":"Joining Plastics","issue":"10. Jg. Heft 2","date_created":"2021-11-08T10:55:35Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"journal_article"},{"place":"Lyon (Frankreich)","date_created":"2021-11-08T10:57:20Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"conference","citation":{"short":"V. Schöppner, A. Bagsik, F. Knoop, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.","chicago":"Schöppner, Volker, A. Bagsik, and F. Knoop. “Quality Improvement of FDM Parts by Parameter Optimization.” In <i>32nd International Conference of the Polymer Processing Society (PPS)</i>. Lyon (Frankreich), 2016.","ieee":"V. Schöppner, A. Bagsik, and F. Knoop, “Quality Improvement of FDM Parts by Parameter Optimization,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.","apa":"Schöppner, V., Bagsik, A., &#38; Knoop, F. (2016). Quality Improvement of FDM Parts by Parameter Optimization. <i>32nd International Conference of the Polymer Processing Society (PPS)</i>. 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).","bibtex":"@inproceedings{Schöppner_Bagsik_Knoop_2016, place={Lyon (Frankreich)}, title={Quality Improvement of FDM Parts by Parameter Optimization}, booktitle={32nd International Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker and Bagsik, A. and Knoop, F.}, year={2016} }","ama":"Schöppner V, Bagsik A, Knoop F. Quality Improvement of FDM Parts by Parameter Optimization. In: <i>32nd International Conference of the Polymer Processing Society (PPS)</i>. ; 2016.","mla":"Schöppner, Volker, et al. “Quality Improvement of FDM Parts by Parameter Optimization.” <i>32nd International Conference of the Polymer Processing Society (PPS)</i>, 2016."},"publication":"32nd International Conference of the Polymer Processing Society (PPS)","_id":"27272","language":[{"iso":"eng"}],"user_id":"44116","conference":{"name":"32nd International Conference of the Polymer Processing Society (PPS)","location":"Lyon (Frankreich)"},"author":[{"last_name":"Schöppner","first_name":"Volker","full_name":"Schöppner, Volker","id":"20530"},{"full_name":"Bagsik, A.","first_name":"A.","last_name":"Bagsik"},{"full_name":"Knoop, F.","last_name":"Knoop","first_name":"F."}],"status":"public","title":"Quality Improvement of FDM Parts by Parameter Optimization","year":"2016","date_updated":"2022-01-06T06:57:37Z"},{"date_updated":"2022-01-06T06:57:37Z","year":"2016","status":"public","title":"Realitätsnah und definiert verschmutzen","publication_identifier":{"issn":["0023-5563"]},"author":[{"last_name":"Schöppner","first_name":"Volker","full_name":"Schöppner, Volker","id":"20530"},{"first_name":"P.","last_name":"Meilwes","full_name":"Meilwes, P."}],"user_id":"44116","page":"80-84","language":[{"iso":"eng"}],"_id":"27273","issue":"106. Jg. Heft 8","publication":"Kunststoffe","citation":{"mla":"Schöppner, Volker, and P. Meilwes. “Realitätsnah Und Definiert Verschmutzen.” <i>Kunststoffe</i>, no. 106. Jg. Heft 8, 2016, pp. 80–84.","bibtex":"@article{Schöppner_Meilwes_2016, title={Realitätsnah und definiert verschmutzen}, number={106. Jg. Heft 8}, journal={Kunststoffe}, author={Schöppner, Volker and Meilwes, P.}, year={2016}, pages={80–84} }","ama":"Schöppner V, Meilwes P. Realitätsnah und definiert verschmutzen. <i>Kunststoffe</i>. 2016;(106. Jg. Heft 8):80-84.","ieee":"V. Schöppner and P. Meilwes, “Realitätsnah und definiert verschmutzen,” <i>Kunststoffe</i>, no. 106. Jg. Heft 8, pp. 80–84, 2016.","apa":"Schöppner, V., &#38; Meilwes, P. (2016). Realitätsnah und definiert verschmutzen. <i>Kunststoffe</i>, <i>106. Jg. Heft 8</i>, 80–84.","short":"V. Schöppner, P. Meilwes, Kunststoffe (2016) 80–84.","chicago":"Schöppner, Volker, and P. Meilwes. “Realitätsnah Und Definiert Verschmutzen.” <i>Kunststoffe</i>, no. 106. Jg. Heft 8 (2016): 80–84."},"type":"journal_article","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2021-11-08T10:59:18Z"},{"publication_identifier":{"issn":["1618-8357"]},"author":[{"id":"20530","full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker"},{"full_name":"Fiebig, I.","first_name":"I.","last_name":"Fiebig"}],"year":"2016","status":"public","title":"Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht","date_updated":"2022-01-06T06:57:37Z","language":[{"iso":"eng"}],"_id":"27274","page":"120-126","user_id":"44116","citation":{"ama":"Schöppner V, Fiebig I. Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht. <i>Jahresmagazin Kunststofftechnik</i>. Published online 2016:120-126.","bibtex":"@article{Schöppner_Fiebig_2016, title={Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht}, journal={Jahresmagazin Kunststofftechnik}, author={Schöppner, Volker and Fiebig, I.}, year={2016}, pages={120–126} }","mla":"Schöppner, Volker, and I. Fiebig. “Schweißen von Faserverstärkten Kunststoffen: Erhöhung Der Wirksamkeit Der Faserverstärkung in Der Schweißnaht.” <i>Jahresmagazin Kunststofftechnik</i>, 2016, pp. 120–26.","short":"V. Schöppner, I. Fiebig, Jahresmagazin Kunststofftechnik (2016) 120–126.","chicago":"Schöppner, Volker, and I. Fiebig. “Schweißen von Faserverstärkten Kunststoffen: Erhöhung Der Wirksamkeit Der Faserverstärkung in Der Schweißnaht.” <i>Jahresmagazin Kunststofftechnik</i>, 2016, 120–26.","apa":"Schöppner, V., &#38; Fiebig, I. (2016). Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht. <i>Jahresmagazin Kunststofftechnik</i>, 120–126.","ieee":"V. Schöppner and I. Fiebig, “Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht,” <i>Jahresmagazin Kunststofftechnik</i>, pp. 120–126, 2016."},"publication":"Jahresmagazin Kunststofftechnik","date_created":"2021-11-08T11:00:49Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"journal_article"},{"language":[{"iso":"eng"}],"_id":"27275","user_id":"44116","status":"public","year":"2016","title":"Several Influences during Examinations of Laser Transmission Welding - Current Status","conference":{"location":"Melbourne (Australien)","name":"69th Annual Assembly of the International Institute of Welding (IIW)"},"author":[{"full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner","id":"20530"},{"full_name":"Fiebig, I.","last_name":"Fiebig","first_name":"I."},{"full_name":"Lakemeyer, P.","first_name":"P.","last_name":"Lakemeyer"},{"last_name":"Bates","first_name":"P.","full_name":"Bates, P."},{"full_name":"Zazoum, B.","first_name":"B.","last_name":"Zazoum"},{"full_name":"Zak, G.","first_name":"G.","last_name":"Zak"},{"full_name":"DuQuesnay, D.","last_name":"DuQuesnay","first_name":"D."}],"date_updated":"2022-01-06T06:57:37Z","place":"Melbourne (Australien)","date_created":"2021-11-08T11:03:08Z","type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"publication":"69th Annual Assembly of the International Institute of Welding (IIW)","citation":{"short":"V. Schöppner, I. Fiebig, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, D. DuQuesnay, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.","chicago":"Schöppner, Volker, I. Fiebig, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, and D. DuQuesnay. “Several Influences during Examinations of Laser Transmission Welding - Current Status.” In <i>69th Annual Assembly of the International Institute of Welding (IIW)</i>. Melbourne (Australien), 2016.","apa":"Schöppner, V., Fiebig, I., Lakemeyer, P., Bates, P., Zazoum, B., Zak, G., &#38; DuQuesnay, D. (2016). Several Influences during Examinations of Laser Transmission Welding - Current Status. <i>69th Annual Assembly of the International Institute of Welding (IIW)</i>. 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien).","ieee":"V. Schöppner <i>et al.</i>, “Several Influences during Examinations of Laser Transmission Welding - Current Status,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.","ama":"Schöppner V, Fiebig I, Lakemeyer P, et al. Several Influences during Examinations of Laser Transmission Welding - Current Status. In: <i>69th Annual Assembly of the International Institute of Welding (IIW)</i>. ; 2016.","bibtex":"@inproceedings{Schöppner_Fiebig_Lakemeyer_Bates_Zazoum_Zak_DuQuesnay_2016, place={Melbourne (Australien)}, title={Several Influences during Examinations of Laser Transmission Welding - Current Status}, booktitle={69th Annual Assembly of the International Institute of Welding (IIW)}, author={Schöppner, Volker and Fiebig, I. and Lakemeyer, P. and Bates, P. and Zazoum, B. and Zak, G. and DuQuesnay, D.}, year={2016} }","mla":"Schöppner, Volker, et al. “Several Influences during Examinations of Laser Transmission Welding - Current Status.” <i>69th Annual Assembly of the International Institute of Welding (IIW)</i>, 2016."}},{"citation":{"short":"V. Schöppner, F. Evers, P. Lakemeyer, Welding in the World (2016).","chicago":"Schöppner, Volker, F. Evers, and P. Lakemeyer. “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials.” <i>Welding in the World</i>, no. Onlineausgabe (2016).","ieee":"V. Schöppner, F. Evers, and P. Lakemeyer, “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials,” <i>Welding in the World</i>, no. Onlineausgabe, 2016.","apa":"Schöppner, V., Evers, F., &#38; Lakemeyer, P. (2016). The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials. <i>Welding in the World</i>, <i>Onlineausgabe</i>.","bibtex":"@article{Schöppner_Evers_Lakemeyer_2016, title={The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials}, number={Onlineausgabe}, journal={Welding in the World}, author={Schöppner, Volker and Evers, F. and Lakemeyer, P.}, year={2016} }","ama":"Schöppner V, Evers F, Lakemeyer P. The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials. <i>Welding in the World</i>. 2016;(Onlineausgabe).","mla":"Schöppner, Volker, et al. “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials.” <i>Welding in the World</i>, no. Onlineausgabe, 2016."},"publication":"Welding in the World","issue":"Onlineausgabe","date_created":"2021-11-08T11:06:19Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"journal_article","publication_identifier":{"issn":["0043-2288"]},"author":[{"full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker","id":"20530"},{"last_name":"Evers","first_name":"F.","full_name":"Evers, F."},{"first_name":"P.","last_name":"Lakemeyer","full_name":"Lakemeyer, P."}],"title":"The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials","status":"public","year":"2016","date_updated":"2022-01-06T06:57:37Z","_id":"27277","language":[{"iso":"eng"}],"user_id":"44116"},{"abstract":[{"text":"The mechanical characterization of fused deposition modeling (FDM) parts is mostly done by static tests. In many applications, parts are also dynamically loaded. Here, fatigue tests can help to identify the expected lifetime of a part. This article discusses the fatigue behavior of FDM specimens manufactured with Ultem 9085. For this, tensile bars are manufactured according to ASTM D638 in different build orientations. Tests are performed in a range of pulsating tensile stresses, and S-N curves are documented for different build orientations. For higher loads, the FDM anisotropy characterizes the lifetime of used specimens, which is similar to static tensile bars. For lower loads, including a higher number of cycles to failure, S-N curves of different build orientations converge. In further tests, tensile bars were chemically smoothed with chloroform vapor. Chemical smoothing reduces surface roughness and increases tensile strength of specimens in the upright build direction. Fatigue tests of chemically treated specimens show no significant lifetime increase.","lang":"eng"}],"publication":"27th Annual International Solid Freeform Fabrication Symposium ","citation":{"ieee":"M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in <i>27th Annual International Solid Freeform Fabrication Symposium </i>, 2016, vol. 27, pp. 563–568, doi: <a href=\"https://doi.org/10.1007/s11837-016-2197-2\">10.1007/s11837-016-2197-2</a>.","mla":"Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.” <i>27th Annual International Solid Freeform Fabrication Symposium </i>, vol. 27, 2016, pp. 563–568, doi:<a href=\"https://doi.org/10.1007/s11837-016-2197-2\">10.1007/s11837-016-2197-2</a>.","apa":"Fischer, M., &#38; Schöppner, V. (2016). Fatigue Behavior of FDM Parts Manufactured with Ultem 9085. <i>27th Annual International Solid Freeform Fabrication Symposium </i>, <i>27</i>, 563–568. <a href=\"https://doi.org/10.1007/s11837-016-2197-2\">https://doi.org/10.1007/s11837-016-2197-2</a>","bibtex":"@inproceedings{Fischer_Schöppner_2016, title={Fatigue Behavior of FDM Parts Manufactured with Ultem 9085}, volume={27}, DOI={<a href=\"https://doi.org/10.1007/s11837-016-2197-2\">10.1007/s11837-016-2197-2</a>}, booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Fischer, M. and Schöppner, Volker}, year={2016}, pages={563–568} }","ama":"Fischer M, Schöppner V. Fatigue Behavior of FDM Parts Manufactured with Ultem 9085. In: <i>27th Annual International Solid Freeform Fabrication Symposium </i>. Vol 27. ; 2016:563–568. doi:<a href=\"https://doi.org/10.1007/s11837-016-2197-2\">10.1007/s11837-016-2197-2</a>","short":"M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.","chicago":"Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.” In <i>27th Annual International Solid Freeform Fabrication Symposium </i>, 27:563–568, 2016. <a href=\"https://doi.org/10.1007/s11837-016-2197-2\">https://doi.org/10.1007/s11837-016-2197-2</a>."},"type":"conference","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"321"},{"_id":"9"}],"date_created":"2021-05-07T13:22:58Z","date_updated":"2022-01-06T06:55:22Z","intvolume":"        27","status":"public","year":"2016","title":"Fatigue Behavior of FDM Parts Manufactured with Ultem 9085","author":[{"last_name":"Fischer","first_name":"M.","full_name":"Fischer, M."},{"id":"20530","first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker"}],"user_id":"70729","doi":"10.1007/s11837-016-2197-2","volume":27,"page":"563–568","language":[{"iso":"eng"}],"_id":"22019"},{"abstract":[{"text":"The material Ultem 9085 is a flame-retardant thermoplastic polymer, which can be processed with Fused Deposition Modeling (FDM). Due to ist high strength-to-weight ratio and FST rating, Ultem 9085 parts are used in aviation. Process related staircase effects on rounded and slanting part areas require a surface treatment for end use parts. These processes include smoothing by mass finishing or coating in order to reduce surface roughness. An alternative smoothing technique is chemical surface treatment, such as the use of Acetone for ABS materials. In this paper, the surface of Ultem 9085 parts is treated with Chloroform vapor in order to solve material at the surface and smooth it. Therefore, specimens built in different build orientations are treated and tested with regard to surface roughness values and mechancial strength properties. The analysis of surface roughness and treatment time shows a significantly higher efficiency for chemical treatment in comparison to mass finishing. By employing chemical treatment, it is possible to reduce surface roughness by more than 80 % to Rz values of approximately 15 µm. Mechanical tests and measurements of the Melt Volume Rate (MVR) show no material destruction for chemical surface treatment at room temperature for less than 150 min.","lang":"eng"}],"publication":"Rapid Tech - International Trade Show & Conference for Additive Manufacturing","citation":{"bibtex":"@inproceedings{Fischer_Seewald_Schöppner_2016, title={Chemical Surface Treatment of Ultem 9085 Parts}, DOI={<a href=\"https://doi.org/10.3139/9783446450608.010\">10.3139/9783446450608.010</a>}, booktitle={Rapid Tech - International Trade Show &#38; Conference for Additive Manufacturing}, publisher={Carl Hanser Verlag GmbH &#38; Co. KG}, author={Fischer, M. and Seewald, O. and Schöppner, Volker}, year={2016}, pages={121–133} }","ama":"Fischer M, Seewald O, Schöppner V. Chemical Surface Treatment of Ultem 9085 Parts. In: <i>Rapid Tech - International Trade Show &#38; Conference for Additive Manufacturing</i>. Carl Hanser Verlag GmbH &#38; Co. KG; 2016:121-133. doi:<a href=\"https://doi.org/10.3139/9783446450608.010\">10.3139/9783446450608.010</a>","short":"M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show &#38; Conference for Additive Manufacturing, Carl Hanser Verlag GmbH &#38; Co. KG, 2016, pp. 121–133.","chicago":"Fischer, M., O. Seewald, and Volker Schöppner. “Chemical Surface Treatment of Ultem 9085 Parts.” In <i>Rapid Tech - International Trade Show &#38; Conference for Additive Manufacturing</i>, 121–33. Carl Hanser Verlag GmbH &#38; Co. KG, 2016. <a href=\"https://doi.org/10.3139/9783446450608.010\">https://doi.org/10.3139/9783446450608.010</a>.","ieee":"M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in <i>Rapid Tech - International Trade Show &#38; Conference for Additive Manufacturing</i>, 2016, pp. 121–133, doi: <a href=\"https://doi.org/10.3139/9783446450608.010\">10.3139/9783446450608.010</a>.","apa":"Fischer, M., Seewald, O., &#38; Schöppner, V. (2016). Chemical Surface Treatment of Ultem 9085 Parts. <i>Rapid Tech - International Trade Show &#38; Conference for Additive Manufacturing</i>, 121–133. <a href=\"https://doi.org/10.3139/9783446450608.010\">https://doi.org/10.3139/9783446450608.010</a>","mla":"Fischer, M., et al. “Chemical Surface Treatment of Ultem 9085 Parts.” <i>Rapid Tech - International Trade Show &#38; Conference for Additive Manufacturing</i>, Carl Hanser Verlag GmbH &#38; Co. KG, 2016, pp. 121–33, doi:<a href=\"https://doi.org/10.3139/9783446450608.010\">10.3139/9783446450608.010</a>."},"type":"conference","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"321"},{"_id":"9"}],"date_created":"2021-05-07T13:23:21Z","date_updated":"2022-01-06T06:55:23Z","title":"Chemical Surface Treatment of Ultem 9085 Parts","status":"public","year":"2016","author":[{"full_name":"Fischer, M.","first_name":"M.","last_name":"Fischer"},{"full_name":"Seewald, O.","last_name":"Seewald","first_name":"O."},{"id":"20530","first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker"}],"user_id":"70729","doi":"10.3139/9783446450608.010","page":"121-133","language":[{"iso":"eng"}],"_id":"22039","publisher":"Carl Hanser Verlag GmbH & Co. KG"},{"type":"journal_article","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2021-11-08T10:00:16Z","publication":"KGK Kautschuk Gummi Kunststoffe","issue":"69. Jg. Heft 4","citation":{"short":"V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, KGK Kautschuk Gummi Kunststoffe (2016) 30–36.","chicago":"Schöppner, Volker, Michael Schadomsky, C. Hopmann, and F. Lemke. “Analyse Des Mischverhaltens von Stiftextrudern Mit Simulativen Und Experimentellen Methoden.” <i>KGK Kautschuk Gummi Kunststoffe</i>, no. 69. Jg. Heft 4 (2016): 30–36.","apa":"Schöppner, V., Schadomsky, M., Hopmann, C., &#38; Lemke, F. (2016). Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden. <i>KGK Kautschuk Gummi Kunststoffe</i>, <i>69. Jg. Heft 4</i>, 30–36.","ieee":"V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden,” <i>KGK Kautschuk Gummi Kunststoffe</i>, no. 69. Jg. Heft 4, pp. 30–36, 2016.","ama":"Schöppner V, Schadomsky M, Hopmann C, Lemke F. Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden. <i>KGK Kautschuk Gummi Kunststoffe</i>. 2016;(69. Jg. Heft 4):30-36.","bibtex":"@article{Schöppner_Schadomsky_Hopmann_Lemke_2016, title={Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden}, number={69. Jg. Heft 4}, journal={KGK Kautschuk Gummi Kunststoffe}, author={Schöppner, Volker and Schadomsky, Michael and Hopmann, C. and Lemke, F.}, year={2016}, pages={30–36} }","mla":"Schöppner, Volker, et al. “Analyse Des Mischverhaltens von Stiftextrudern Mit Simulativen Und Experimentellen Methoden.” <i>KGK Kautschuk Gummi Kunststoffe</i>, no. 69. Jg. Heft 4, 2016, pp. 30–36."},"user_id":"11904","page":"30-36","_id":"27247","language":[{"iso":"eng"}],"date_updated":"2022-07-04T14:21:20Z","title":"Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden","status":"public","year":"2016","author":[{"full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner","id":"20530"},{"last_name":"Schadomsky","first_name":"Michael","full_name":"Schadomsky, Michael"},{"last_name":"Hopmann","first_name":"C.","full_name":"Hopmann, C."},{"first_name":"F.","last_name":"Lemke","full_name":"Lemke, F."}],"publication_identifier":{"issn":["0948-3276"]}},{"date_updated":"2022-01-06T06:57:37Z","author":[{"id":"20530","full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner"},{"full_name":"Fecke, N.","last_name":"Fecke","first_name":"N."},{"full_name":"Herken, T.","last_name":"Herken","first_name":"T."}],"publication_identifier":{"issn":["1618-8357"]},"status":"public","title":"Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern","year":"2015","publication_date":"01012015","user_id":"44116","_id":"27296","language":[{"iso":"ger"}],"citation":{"apa":"Schöppner, V., Fecke, N., &#38; Herken, T. (2015). Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern. <i>Jahresmagazin Kunststofftechnik</i>.","ieee":"V. Schöppner, N. Fecke, and T. Herken, “Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern,” <i>Jahresmagazin Kunststofftechnik</i>, 2015.","chicago":"Schöppner, Volker, N. Fecke, and T. Herken. “Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern.” <i>Jahresmagazin Kunststofftechnik</i>, 2015.","short":"V. Schöppner, N. Fecke, T. Herken, Jahresmagazin Kunststofftechnik (2015).","mla":"Schöppner, Volker, et al. “Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern.” <i>Jahresmagazin Kunststofftechnik</i>, 2015.","ama":"Schöppner V, Fecke N, Herken T. Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern. <i>Jahresmagazin Kunststofftechnik</i>. 2015.","bibtex":"@article{Schöppner_Fecke_Herken_2015, title={Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern}, journal={Jahresmagazin Kunststofftechnik}, author={Schöppner, Volker and Fecke, N. and Herken, T.}, year={2015} }"},"publication":"Jahresmagazin Kunststofftechnik","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"newspaper_article","date_created":"2021-11-10T09:46:29Z"},{"department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"conference","date_created":"2021-11-10T10:02:25Z","place":"Jeju (Südkorea)","citation":{"chicago":"Schöppner, Volker, F. Reinders, Wolfgang Bremser, and E. Sabanov. “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood.” In <i>31st International Conference of the Polymer Processing Society (PPS)</i>. Jeju (Südkorea), 2015.","short":"V. Schöppner, F. Reinders, W. Bremser, E. Sabanov, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.","apa":"Schöppner, V., Reinders, F., Bremser, W., &#38; Sabanov, E. (2015). Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood. <i>31st International Conference of the Polymer Processing Society (PPS)</i>. 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea).","ieee":"V. Schöppner, F. Reinders, W. Bremser, and E. Sabanov, “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.","ama":"Schöppner V, Reinders F, Bremser W, Sabanov E. Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood. In: <i>31st International Conference of the Polymer Processing Society (PPS)</i>. ; 2015.","bibtex":"@inproceedings{Schöppner_Reinders_Bremser_Sabanov_2015, place={Jeju (Südkorea)}, title={Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood}, booktitle={31st International Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker and Reinders, F. and Bremser, Wolfgang and Sabanov, E.}, year={2015} }","mla":"Schöppner, Volker, et al. “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood.” <i>31st International Conference of the Polymer Processing Society (PPS)</i>, 2015."},"publication":"31st International Conference of the Polymer Processing Society (PPS)","user_id":"44116","language":[{"iso":"eng"}],"_id":"27300","date_updated":"2022-01-06T06:57:37Z","author":[{"full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker","id":"20530"},{"last_name":"Reinders","first_name":"F.","full_name":"Reinders, F."},{"id":"32","full_name":"Bremser, Wolfgang","first_name":"Wolfgang","last_name":"Bremser"},{"full_name":"Sabanov, E.","last_name":"Sabanov","first_name":"E."}],"conference":{"name":"31st International Conference of the Polymer Processing Society (PPS)","location":"Jeju (Südkorea)"},"title":"Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood","year":"2015","status":"public"},{"user_id":"44116","_id":"27301","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:57:37Z","author":[{"full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker","id":"20530"},{"last_name":"Leßmann","first_name":"J.","full_name":"Leßmann, J."}],"conference":{"name":"31st International Conference of the Polymer Processing Society (PPS)","location":"Jeju (Südkorea)"},"status":"public","title":"Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders","year":"2015","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"conference","date_created":"2021-11-10T10:06:01Z","place":"Jeju (Südkorea)","citation":{"ieee":"V. Schöppner and J. Leßmann, “Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.","apa":"Schöppner, V., &#38; Leßmann, J. (2015). Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders. <i>31st International Conference of the Polymer Processing Society (PPS)</i>. 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea).","chicago":"Schöppner, Volker, and J. Leßmann. “Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders.” In <i>31st International Conference of the Polymer Processing Society (PPS)</i>. Jeju (Südkorea), 2015.","short":"V. Schöppner, J. Leßmann, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.","mla":"Schöppner, Volker, and J. Leßmann. “Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders.” <i>31st International Conference of the Polymer Processing Society (PPS)</i>, 2015.","bibtex":"@inproceedings{Schöppner_Leßmann_2015, place={Jeju (Südkorea)}, title={Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders}, booktitle={31st International Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker and Leßmann, J.}, year={2015} }","ama":"Schöppner V, Leßmann J. Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders. In: <i>31st International Conference of the Polymer Processing Society (PPS)</i>. ; 2015."},"publication":"31st International Conference of the Polymer Processing Society (PPS)"},{"intvolume":"        68","date_updated":"2022-01-06T06:57:37Z","publication_identifier":{"issn":["0176-1625"]},"author":[{"id":"20530","full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker"},{"last_name":"Brockhaus","first_name":"S.","full_name":"Brockhaus, S."}],"year":"2015","title":"Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion","status":"public","volume":68,"publication_date":"20150101","user_id":"44116","_id":"27303","language":[{"iso":"ger"}],"page":"470-474","citation":{"mla":"Schöppner, Volker, and S. Brockhaus. “Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion.” <i>GAK Gummi Fasern Kunststoffe</i>, vol. 68, no. 7, 2015, pp. 470–74.","ama":"Schöppner V, Brockhaus S. Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion. <i>GAK Gummi Fasern Kunststoffe</i>. 2015:470-474.","bibtex":"@article{Schöppner_Brockhaus_2015, title={Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion}, volume={68}, number={7}, journal={GAK Gummi Fasern Kunststoffe}, author={Schöppner, Volker and Brockhaus, S.}, year={2015}, pages={470–474} }","apa":"Schöppner, V., &#38; Brockhaus, S. (2015). Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion. <i>GAK Gummi Fasern Kunststoffe</i>, <i>68</i>(7), 470–474.","ieee":"V. Schöppner and S. Brockhaus, “Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion,” <i>GAK Gummi Fasern Kunststoffe</i>, vol. 68, no. 7, pp. 470–474, 2015.","short":"V. Schöppner, S. Brockhaus, GAK Gummi Fasern Kunststoffe 68 (2015) 470–474.","chicago":"Schöppner, Volker, and S. Brockhaus. “Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion.” <i>GAK Gummi Fasern Kunststoffe</i>, 2015."},"issue":"7","publication":"GAK Gummi Fasern Kunststoffe","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"newspaper_article","date_created":"2021-11-10T10:14:06Z"},{"publication_date":"20150101","user_id":"44116","volume":68,"page":"46-58","_id":"27305","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:57:37Z","intvolume":"        68","status":"public","title":"Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds","year":"2015","publication_identifier":{"issn":["0948-3276"]},"author":[{"id":"20530","first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker"},{"full_name":"Brockhaus, S.","first_name":"S.","last_name":"Brockhaus"},{"full_name":"Klie, B.","first_name":"B.","last_name":"Klie"},{"full_name":"Giese, U.","last_name":"Giese","first_name":"U."}],"type":"newspaper_article","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2021-11-10T10:23:15Z","issue":"7-8","publication":"KGK Kautschuk Gummi Kunststoffe","citation":{"short":"V. Schöppner, S. Brockhaus, B. Klie, U. Giese, KGK Kautschuk Gummi Kunststoffe 68 (2015) 46–58.","chicago":"Schöppner, Volker, S. Brockhaus, B. Klie, and U. Giese. “Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds.” <i>KGK Kautschuk Gummi Kunststoffe</i>, 2015.","apa":"Schöppner, V., Brockhaus, S., Klie, B., &#38; Giese, U. (2015). Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds. <i>KGK Kautschuk Gummi Kunststoffe</i>, <i>68</i>(7–8), 46–58.","ieee":"V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds,” <i>KGK Kautschuk Gummi Kunststoffe</i>, vol. 68, no. 7–8, pp. 46–58, 2015.","ama":"Schöppner V, Brockhaus S, Klie B, Giese U. Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds. <i>KGK Kautschuk Gummi Kunststoffe</i>. 2015:46-58.","bibtex":"@article{Schöppner_Brockhaus_Klie_Giese_2015, title={Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds}, volume={68}, number={7–8}, journal={KGK Kautschuk Gummi Kunststoffe}, author={Schöppner, Volker and Brockhaus, S. and Klie, B. and Giese, U.}, year={2015}, pages={46–58} }","mla":"Schöppner, Volker, et al. “Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds.” <i>KGK Kautschuk Gummi Kunststoffe</i>, vol. 68, no. 7–8, 2015, pp. 46–58."}},{"user_id":"44116","language":[{"iso":"eng"}],"_id":"27306","date_updated":"2022-01-06T06:57:37Z","year":"2015","status":"public","title":"Influence of the Screw Clearances on the Pressure Build-Up","conference":{"name":"31st International Conference of the Polymer Processing Society (PPS)","location":"Jeju (Südkorea)"},"author":[{"last_name":"Schöppner","first_name":"Volker","full_name":"Schöppner, Volker","id":"20530"},{"last_name":"Herken","first_name":"T.","full_name":"Herken, T."},{"full_name":"Hüttner, M.","last_name":"Hüttner","first_name":"M."}],"type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"place":"Jeju (Südkorea)","date_created":"2021-11-10T10:28:20Z","publication":"31st International Conference of the Polymer Processing Society (PPS)","citation":{"bibtex":"@inproceedings{Schöppner_Herken_Hüttner_2015, place={Jeju (Südkorea)}, title={Influence of the Screw Clearances on the Pressure Build-Up}, booktitle={31st International Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker and Herken, T. and Hüttner, M.}, year={2015} }","ama":"Schöppner V, Herken T, Hüttner M. Influence of the Screw Clearances on the Pressure Build-Up. In: <i>31st International Conference of the Polymer Processing Society (PPS)</i>. ; 2015.","mla":"Schöppner, Volker, et al. “Influence of the Screw Clearances on the Pressure Build-Up.” <i>31st International Conference of the Polymer Processing Society (PPS)</i>, 2015.","chicago":"Schöppner, Volker, T. Herken, and M. Hüttner. “Influence of the Screw Clearances on the Pressure Build-Up.” In <i>31st International Conference of the Polymer Processing Society (PPS)</i>. Jeju (Südkorea), 2015.","short":"V. Schöppner, T. Herken, M. Hüttner, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.","ieee":"V. Schöppner, T. Herken, and M. Hüttner, “Influence of the Screw Clearances on the Pressure Build-Up,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.","apa":"Schöppner, V., Herken, T., &#38; Hüttner, M. (2015). Influence of the Screw Clearances on the Pressure Build-Up. <i>31st International Conference of the Polymer Processing Society (PPS)</i>. 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea)."}}]