---
_id: '9747'
abstract:
- lang: eng
  text: Bei der Konstruktion von Maschinen ist es oftmals erforderlich, Schwingungen
    minimal zu halten. Um z.B. die Lebensdauer zu erhöhen, Material einzusparen oder
    den Geräuschpegel gering zu halten muss oft ein großer Aufwand zur Dämpfung von
    auftretenden Schwingungen betrieben werden. In vielen technischen Anwendungen
    werden Einzelteile miteinander verschraubt. Diese Fügestellen können gezielt und
    mit wenig Aufwand zur Schwingungsdämpfung herangezogen werden. Die Berechnung
    des dynamischen Verhaltens verschraubter Strukturen stellt immer noch eine Herausforderung
    dar. Es wurde eine Methode entwickelt, um den eingeschwungenen Zustand elastischer,
    miteinander verschraubter Körper mit rauen Fügestellen bei periodischer Anregung
    zu berechnen. Als Basis dienen Finite Elemente Modelle der einzelnen Teile, deren
    Freiheitsgrade durch modale Kondensation reduziert werden. Unter Anwendung des
    Verfahrens von Ritz und Galerkin wird eine Näherungslösung für den eingeschwungenen
    Zustand des nichtlinearen, gekoppelten Systems ermittelt. Abhängig von den Schraubenvorspannkräften
    sowie den bestimmenden Parametern der Kontaktflächen, Rautiefe und Reibungskoeffizient,
    kann die Systemantwort berechnet und optimiert werden. Um die Berechnungsmethode
    zu verifizieren wurden Experimente durchgeführt. Der Vergleich zwischen Messung
    und Rechnung zeigt eine gute Übereinstimmung. ({\copyright} 2010 Wiley-VCH Verlag
    GmbH & Co. KGaA, Weinheim)
author:
- first_name: Johannes Sebastian
  full_name: Hölzl, Johannes Sebastian
  last_name: Hölzl
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: Hölzl JS, Sextro W. Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen.
    <i>PAMM</i>. 2010;10(1):247-248. doi:<a href="https://doi.org/10.1002/pamm.201010116">10.1002/pamm.201010116</a>
  apa: Hölzl, J. S., &#38; Sextro, W. (2010). Reibungsdämpfung in ausgedehnten, verschraubten
    Fügestellen. <i>PAMM</i>, <i>10</i>(1), 247–248. <a href="https://doi.org/10.1002/pamm.201010116">https://doi.org/10.1002/pamm.201010116</a>
  bibtex: '@article{Hölzl_Sextro_2010, title={Reibungsdämpfung in ausgedehnten, verschraubten
    Fügestellen}, volume={10}, DOI={<a href="https://doi.org/10.1002/pamm.201010116">10.1002/pamm.201010116</a>},
    number={1}, journal={PAMM}, publisher={WILEY-VCH Verlag}, author={Hölzl, Johannes
    Sebastian and Sextro, Walter}, year={2010}, pages={247–248} }'
  chicago: 'Hölzl, Johannes Sebastian, and Walter Sextro. “Reibungsdämpfung in Ausgedehnten,
    Verschraubten Fügestellen.” <i>PAMM</i> 10, no. 1 (2010): 247–48. <a href="https://doi.org/10.1002/pamm.201010116">https://doi.org/10.1002/pamm.201010116</a>.'
  ieee: J. S. Hölzl and W. Sextro, “Reibungsdämpfung in ausgedehnten, verschraubten
    Fügestellen,” <i>PAMM</i>, vol. 10, no. 1, pp. 247–248, 2010.
  mla: Hölzl, Johannes Sebastian, and Walter Sextro. “Reibungsdämpfung in Ausgedehnten,
    Verschraubten Fügestellen.” <i>PAMM</i>, vol. 10, no. 1, WILEY-VCH Verlag, 2010,
    pp. 247–48, doi:<a href="https://doi.org/10.1002/pamm.201010116">10.1002/pamm.201010116</a>.
  short: J.S. Hölzl, W. Sextro, PAMM 10 (2010) 247–248.
date_created: 2019-05-13T09:43:54Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1002/pamm.201010116
intvolume: '        10'
issue: '1'
language:
- iso: eng
page: 247-248
publication: PAMM
publication_identifier:
  issn:
  - 1617-7061
publisher: WILEY-VCH Verlag
status: public
title: Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen
type: journal_article
user_id: '55222'
volume: 10
year: '2010'
...
---
_id: '9748'
abstract:
- lang: eng
  text: For many technical applications it is necessary to avoid or to reduce vibrations.
    Factors benefiting from vibration reduction are for example the durability of
    the application, which is increased, as well as cost expenses and the level of
    noise, which are both decreased. Rough, bolted interfaces are common in most machines
    and can be used as damping devices with some effort. Perhaps in future such contact
    surfaces could be used as damping devices at the interfaces of an automotive engine
    or exhaust system. Nevertheless it is difficult to predict the effect of a change
    in contact interface parameters on the dynamic behavior of the entire mechanical
    system. Therefore a method for calculating the steady state behavior of elastic
    multi-body systems was developed. The basis of this method is a finite element
    model of each contacting unit. On each model a modal reduction is applied in order
    to reduce the degrees of freedom. The method of Ritz and Galerkin is used to calculate
    the frequency response functions of the reduced system including contact. This
    method allows the calculation of the steady-state behavior of elastic multi-body
    systems with rough, bolted contact interfaces, by taking the pre-stress of the
    bolts, the roughness and the friction coefficient of the contacting surfaces as
    parameters. In order to verify calculated results, a test stand was built. The
    comparison of calculated and experimental results showed a satisfying correlation.
author:
- first_name: Johannes Sebastian
  full_name: ' Hölzl, Johannes Sebastian'
  last_name: ' Hölzl'
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: Hölzl JS, Sextro W. Simulation of the Dynamical Behavior of Elastic Multi-Body
    Systems with Bolted, Rough Contact Interfaces. <i>SAE International Journal of
    Passenger Cars- Mechanical Systems</i>. 2010:929-935. doi:<a href="https://doi.org/10.4271/2010-01-1422">10.4271/2010-01-1422</a>
  apa: Hölzl, J. S., &#38; Sextro, W. (2010). Simulation of the Dynamical Behavior
    of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces. <i>SAE International
    Journal of Passenger Cars- Mechanical Systems</i>, 929–935. <a href="https://doi.org/10.4271/2010-01-1422">https://doi.org/10.4271/2010-01-1422</a>
  bibtex: '@article{ Hölzl_Sextro_2010, title={Simulation of the Dynamical Behavior
    of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces}, DOI={<a
    href="https://doi.org/10.4271/2010-01-1422">10.4271/2010-01-1422</a>}, journal={SAE
    International Journal of Passenger Cars- Mechanical Systems}, author={ Hölzl,
    Johannes Sebastian and Sextro, Walter}, year={2010}, pages={929–935} }'
  chicago: Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical
    Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.”
    <i>SAE International Journal of Passenger Cars- Mechanical Systems</i>, 2010,
    929–35. <a href="https://doi.org/10.4271/2010-01-1422">https://doi.org/10.4271/2010-01-1422</a>.
  ieee: J. S.  Hölzl and W. Sextro, “Simulation of the Dynamical Behavior of Elastic
    Multi-Body Systems with Bolted, Rough Contact Interfaces,” <i>SAE International
    Journal of Passenger Cars- Mechanical Systems</i>, pp. 929–935, 2010.
  mla: Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical
    Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.”
    <i>SAE International Journal of Passenger Cars- Mechanical Systems</i>, 2010,
    pp. 929–35, doi:<a href="https://doi.org/10.4271/2010-01-1422">10.4271/2010-01-1422</a>.
  short: J.S.  Hölzl, W. Sextro, SAE International Journal of Passenger Cars- Mechanical
    Systems (2010) 929–935.
date_created: 2019-05-13T09:49:24Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.4271/2010-01-1422
keyword:
- Automotive
language:
- iso: eng
page: 929-935
publication: SAE International Journal of Passenger Cars- Mechanical Systems
quality_controlled: '1'
status: public
title: Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted,
  Rough Contact Interfaces
type: journal_article
user_id: '55222'
year: '2010'
...
---
_id: '9753'
abstract:
- lang: eng
  text: 'Piezoelektrische Trägheitsmotoren nutzen die Trägheit einer bewegten Masse,
    um diese in kleinen Schritten durch abwechselnde Haft- und Gleitphasen voranzutreiben.
    Eine Kernfrage bei der Entwicklung eines piezoelektrischen Trägheitsmotors ist,
    welches elektrische Ansteuersignal für das gewünschte Motorverhalten optimal ist.
    Das elektrische Signal führt zu einer Bewegung des piezoelektrischen Aktors und
    damit der Antriebsstange, die den reibschlüssigen Vortrieb bewirkt. Entsprechend
    wird diese Fragestellung in zwei Teilen untersucht: Anhand eines Starrkörpermodells
    werden zunächst Bewegungsverläufe für die Antriebsstange ermittelt, mit denen
    die maximale Geschwindigkeit erreicht wird. Dabei werden drei Antriebsmodi identifiziert.
    Mit allen kann eine höhere Geschwindigkeit als mit der heute häufig verwendeten
    Sägezahnanregung erreicht werden. Anschließend wird ein einfaches dynamisches
    Modell eines piezoelektrischen Aktors genutzt, um die notwendigen elektrischen
    Ansteuersignale für die verschiedenen Antriebsmodi zu bestimmen. Es zeigt sich,
    dass das gewählte einfache Modell hierzu nur bedingt geeignet ist.'
author:
- first_name: Matthias
  full_name: Hunstig, Matthias
  last_name: Hunstig
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: 'Hunstig M, Hemsel T, Sextro W. Anregungskonzepte und Modellierung piezoelektrischer
    Trägheitsmotoren. In: Gausemeier J, Rammig F, Schäfer W, Trächtler A, eds. <i>7.
    Paderborner Workshop Entwurf Mechatronischer Systeme</i>. Vol 272. HNI-Verlagsschriftenreihe.
    Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2010:129-141.'
  apa: 'Hunstig, M., Hemsel, T., &#38; Sextro, W. (2010). Anregungskonzepte und Modellierung
    piezoelektrischer Trägheitsmotoren. In J. Gausemeier, F. Rammig, W. Schäfer, &#38;
    A. Trächtler (Eds.), <i>7. Paderborner Workshop Entwurf mechatronischer Systeme</i>
    (Vol. 272, pp. 129–141). Paderborn: Heinz Nixdorf Institut, Universität Paderborn.'
  bibtex: '@inproceedings{Hunstig_Hemsel_Sextro_2010, place={Paderborn}, series={HNI-Verlagsschriftenreihe},
    title={Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren},
    volume={272}, booktitle={7. Paderborner Workshop Entwurf mechatronischer Systeme},
    publisher={Heinz Nixdorf Institut, Universität Paderborn}, author={Hunstig, Matthias
    and Hemsel, Tobias and Sextro, Walter}, editor={Gausemeier, Jürgen and Rammig,
    Franz and Schäfer, Wilhelm and Trächtler, AnsgarEditors}, year={2010}, pages={129–141},
    collection={HNI-Verlagsschriftenreihe} }'
  chicago: 'Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Anregungskonzepte
    Und Modellierung Piezoelektrischer Trägheitsmotoren.” In <i>7. Paderborner Workshop
    Entwurf Mechatronischer Systeme</i>, edited by Jürgen Gausemeier, Franz Rammig,
    Wilhelm Schäfer, and Ansgar Trächtler, 272:129–41. HNI-Verlagsschriftenreihe.
    Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2010.'
  ieee: M. Hunstig, T. Hemsel, and W. Sextro, “Anregungskonzepte und Modellierung
    piezoelektrischer Trägheitsmotoren,” in <i>7. Paderborner Workshop Entwurf mechatronischer
    Systeme</i>, 2010, vol. 272, pp. 129–141.
  mla: Hunstig, Matthias, et al. “Anregungskonzepte Und Modellierung Piezoelektrischer
    Trägheitsmotoren.” <i>7. Paderborner Workshop Entwurf Mechatronischer Systeme</i>,
    edited by Jürgen Gausemeier et al., vol. 272, Heinz Nixdorf Institut, Universität
    Paderborn, 2010, pp. 129–41.
  short: 'M. Hunstig, T. Hemsel, W. Sextro, in: J. Gausemeier, F. Rammig, W. Schäfer,
    A. Trächtler (Eds.), 7. Paderborner Workshop Entwurf Mechatronischer Systeme,
    Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2010, pp. 129–141.'
date_created: 2019-05-13T10:05:14Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
editor:
- first_name: Jürgen
  full_name: Gausemeier, Jürgen
  last_name: Gausemeier
- first_name: Franz
  full_name: Rammig, Franz
  last_name: Rammig
- first_name: Wilhelm
  full_name: Schäfer, Wilhelm
  last_name: Schäfer
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  last_name: Trächtler
intvolume: '       272'
keyword:
- Piezoelektrischer Trägheitsmotoren
language:
- iso: eng
page: 129-141
place: Paderborn
publication: 7. Paderborner Workshop Entwurf mechatronischer Systeme
publication_identifier:
  issn:
  - 0924-4247
publisher: Heinz Nixdorf Institut, Universität Paderborn
series_title: HNI-Verlagsschriftenreihe
status: public
title: Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren
type: conference
user_id: '55222'
volume: 272
year: '2010'
...
---
_id: '9754'
abstract:
- lang: eng
  text: A model based design approach for improved piezoelectric inertia motors is
    presented. Three velocityoptimized movement patterns for the driving body have
    been derived. The influence of the motor parameters and the process of designing
    an application specific motor with maximum velocity are shown. A simple dynamic
    model of the piezoelectric actuator is used to calculate the voltage signal for
    achieving the desired movement pattern. Observed distortions of the optimum pattern,
    their influence on the motion of the driven body and different methods to reduce
    them are discussed.
author:
- first_name: Matthias
  full_name: Hunstig, Matthias
  last_name: Hunstig
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: 'Hunstig M, Hemsel T, Sextro W. Improving the Performance of Piezoelectric
    Inertia Motors. In: <i>ACTUATOR 2010 Conference Proceedings</i>. ; 2010:657-661.'
  apa: Hunstig, M., Hemsel, T., &#38; Sextro, W. (2010). Improving the Performance
    of Piezoelectric Inertia Motors. In <i>ACTUATOR 2010 Conference Proceedings</i>
    (pp. 657–661).
  bibtex: '@inproceedings{Hunstig_Hemsel_Sextro_2010, title={Improving the Performance
    of Piezoelectric Inertia Motors}, booktitle={ACTUATOR 2010 Conference Proceedings},
    author={Hunstig, Matthias and Hemsel, Tobias and Sextro, Walter}, year={2010},
    pages={657–661} }'
  chicago: Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Improving the Performance
    of Piezoelectric Inertia Motors.” In <i>ACTUATOR 2010 Conference Proceedings</i>,
    657–61, 2010.
  ieee: M. Hunstig, T. Hemsel, and W. Sextro, “Improving the Performance of Piezoelectric
    Inertia Motors,” in <i>ACTUATOR 2010 Conference Proceedings</i>, 2010, pp. 657–661.
  mla: Hunstig, Matthias, et al. “Improving the Performance of Piezoelectric Inertia
    Motors.” <i>ACTUATOR 2010 Conference Proceedings</i>, 2010, pp. 657–61.
  short: 'M. Hunstig, T. Hemsel, W. Sextro, in: ACTUATOR 2010 Conference Proceedings,
    2010, pp. 657–661.'
date_created: 2019-05-13T10:10:31Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
page: 657-661
publication: ACTUATOR 2010 Conference Proceedings
publication_identifier:
  issn:
  - 0924-4247
quality_controlled: '1'
status: public
title: Improving the Performance of Piezoelectric Inertia Motors
type: conference
user_id: '55222'
year: '2010'
...
---
_id: '9760'
abstract:
- lang: eng
  text: Self-optimizing systems are able to adapt their behavior autonomously according
    to their current self-determined objectives. Unforeseen influences could lead
    to dependability-critical behavior of the system. Methods are required which secure
    self-optimizing systems during operation. These methods to increase the dependability
    of the system should already be taken into consideration in the design process.
    This paper presents a guideline for the dependability-oriented design of self-optimizing
    systems, which integrates established classical methods like failure mode and
    effects analysis as well as methods based on self-optimization. On the one hand
    self-optimization is used to increase the dependability of the system by integrating
    objectives like safety, availability, and reliability to the objectives of the
    system. On the other hand methods are required to ensure the self-optimization
    itself. As basis for this guideline serves the principle solution of the system.
    The six phases of the guideline extend the design process and lead to an enhanced
    principle solution. Additionally, the guideline illustrates phases to implement
    and validate the self-optimizing system. The proposed guideline is applied to
    an innovative rail-bound vehicle, called RailCab, which is equipped with self-optimizing
    function modules.
author:
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Jürgen
  full_name: Gausemeier, Jürgen
  last_name: Gausemeier
- first_name: Sebastian
  full_name: Pook, Sebastian
  last_name: Pook
citation:
  ama: 'Sondermann-Wölke C, Hemsel T, Sextro W, Gausemeier J, Pook S. Guideline for
    the dependability-oriented design of self-optimizing systems. In: <i>Industrial
    Informatics (INDIN), 2010 8th IEEE International Conference On</i>. ; 2010:739-744.
    doi:<a href="https://doi.org/10.1109/INDIN.2010.5549490">10.1109/INDIN.2010.5549490</a>'
  apa: Sondermann-Wölke, C., Hemsel, T., Sextro, W., Gausemeier, J., &#38; Pook, S.
    (2010). Guideline for the dependability-oriented design of self-optimizing systems.
    In <i>Industrial Informatics (INDIN), 2010 8th IEEE International Conference on</i>
    (pp. 739–744). <a href="https://doi.org/10.1109/INDIN.2010.5549490">https://doi.org/10.1109/INDIN.2010.5549490</a>
  bibtex: '@inproceedings{Sondermann-Wölke_Hemsel_Sextro_Gausemeier_Pook_2010, title={Guideline
    for the dependability-oriented design of self-optimizing systems}, DOI={<a href="https://doi.org/10.1109/INDIN.2010.5549490">10.1109/INDIN.2010.5549490</a>},
    booktitle={Industrial Informatics (INDIN), 2010 8th IEEE International Conference
    on}, author={Sondermann-Wölke, Christoph and Hemsel, Tobias and Sextro, Walter
    and Gausemeier, Jürgen and Pook, Sebastian}, year={2010}, pages={739–744} }'
  chicago: Sondermann-Wölke, Christoph, Tobias Hemsel, Walter Sextro, Jürgen Gausemeier,
    and Sebastian Pook. “Guideline for the Dependability-Oriented Design of Self-Optimizing
    Systems.” In <i>Industrial Informatics (INDIN), 2010 8th IEEE International Conference
    On</i>, 739–44, 2010. <a href="https://doi.org/10.1109/INDIN.2010.5549490">https://doi.org/10.1109/INDIN.2010.5549490</a>.
  ieee: C. Sondermann-Wölke, T. Hemsel, W. Sextro, J. Gausemeier, and S. Pook, “Guideline
    for the dependability-oriented design of self-optimizing systems,” in <i>Industrial
    Informatics (INDIN), 2010 8th IEEE International Conference on</i>, 2010, pp.
    739–744.
  mla: Sondermann-Wölke, Christoph, et al. “Guideline for the Dependability-Oriented
    Design of Self-Optimizing Systems.” <i>Industrial Informatics (INDIN), 2010 8th
    IEEE International Conference On</i>, 2010, pp. 739–44, doi:<a href="https://doi.org/10.1109/INDIN.2010.5549490">10.1109/INDIN.2010.5549490</a>.
  short: 'C. Sondermann-Wölke, T. Hemsel, W. Sextro, J. Gausemeier, S. Pook, in: Industrial
    Informatics (INDIN), 2010 8th IEEE International Conference On, 2010, pp. 739–744.'
date_created: 2019-05-13T10:25:26Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1109/INDIN.2010.5549490
keyword:
- RailCab
- dependability-critical behavior
- dependability-oriented design
- failure mode
- rail-bound vehicle
- secure self-optimizing systems
- self-optimizing function modules
- optimisation
- railways
- self-adjusting systems
language:
- iso: eng
page: 739 -744
publication: Industrial Informatics (INDIN), 2010 8th IEEE International Conference
  on
quality_controlled: '1'
status: public
title: Guideline for the dependability-oriented design of self-optimizing systems
type: conference
user_id: '55222'
year: '2010'
...
---
_id: '9761'
abstract:
- lang: eng
  text: New mechatronic systems, called self-optimizing systems, are able to adapt
    their behavior according to environmental, user and system specific influences.
    Self-optimizing systems are complex and due to their non-deterministic behavior
    comprise hidden risks, which cannot be foreseen in the design phase of the system.
    Therefore, modifications of the ISO 17359 condition monitoring policy for being
    able to cope with this new kind of systems are presented. Besides avoiding critical
    situations evoked by self-optimization, the proposed concept uses self-optimization
    to increase the dependability of the system. This concept is applied to the active
    guidance module of an innovative rail-bound vehicle. First test drives provide
    information for the enhancement of the implementation of realtime switching to
    appropriate control strategies. The different control strategies are investigated
    in detail. It is illustrated that influences on the system like different track
    sections or the desired velocity of the RailCab effect the system and can lead
    to a higher amount of flange contacts, which indicate higher wear and thus a reduction
    of the availability of the system. Therefore, these influences should be minded
    within the condition monitoring policy. Consequently, this article presents the
    condition monitoring policy for self-optimizing function modules and its application
    to the active railway guidance module.
author:
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: Sondermann-Wölke C, Sextro W. Integration of Condition Monitoring in Self-optimizing
    Function Modules Applied to the Active Railway Guidance Module. <i>International
    Journal On Advances in Intelligent Systems</i>. 2010;3(1-3):65-74.
  apa: Sondermann-Wölke, C., &#38; Sextro, W. (2010). Integration of Condition Monitoring
    in Self-optimizing Function Modules Applied to the Active Railway Guidance Module.
    <i>International Journal On Advances in Intelligent Systems</i>, <i>3</i>(1–3),
    65–74.
  bibtex: '@article{Sondermann-Wölke_Sextro_2010, title={Integration of Condition
    Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance
    Module}, volume={3}, number={1–3}, journal={International Journal On Advances
    in Intelligent Systems}, author={Sondermann-Wölke, Christoph and Sextro, Walter},
    year={2010}, pages={65–74} }'
  chicago: 'Sondermann-Wölke, Christoph, and Walter Sextro. “Integration of Condition
    Monitoring in Self-Optimizing Function Modules Applied to the Active Railway Guidance
    Module.” <i>International Journal On Advances in Intelligent Systems</i> 3, no.
    1–3 (2010): 65–74.'
  ieee: C. Sondermann-Wölke and W. Sextro, “Integration of Condition Monitoring in
    Self-optimizing Function Modules Applied to the Active Railway Guidance Module,”
    <i>International Journal On Advances in Intelligent Systems</i>, vol. 3, no. 1–3,
    pp. 65–74, 2010.
  mla: Sondermann-Wölke, Christoph, and Walter Sextro. “Integration of Condition Monitoring
    in Self-Optimizing Function Modules Applied to the Active Railway Guidance Module.”
    <i>International Journal On Advances in Intelligent Systems</i>, vol. 3, no. 1–3,
    2010, pp. 65–74.
  short: C. Sondermann-Wölke, W. Sextro, International Journal On Advances in Intelligent
    Systems 3 (2010) 65–74.
date_created: 2019-05-13T10:27:02Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
intvolume: '         3'
issue: 1 - 3
keyword:
- dependability
- condition monitoring
- selfoptimization
- active railway guidance module
language:
- iso: eng
page: 65 - 74
publication: International Journal On Advances in Intelligent Systems
quality_controlled: '1'
status: public
title: Integration of Condition Monitoring in Self-optimizing Function Modules Applied
  to the Active Railway Guidance Module
type: journal_article
user_id: '55222'
volume: 3
year: '2010'
...
---
_id: '9762'
abstract:
- lang: eng
  text: Die erweiterten Möglichkeiten der Informationsverarbeitung mechatronischer
    Systeme erlauben es, mechatronische Systeme selbstoptimierend zu gestalten. Dabei
    bezieht sich die Selbstoptimierung auf die Fähigkeit des Systems, sich an die
    aktuelle Umfeldsituation anzupassen; wobei das System im Allgemeinen mehrere relevante
    Ziele verfolgt. Wurde eine Umfeldveränderung bemerkt, so müssen diese Ziele an
    die neue Situation angepasst und das resultierende Verhalten ausgewählt werden.
    In diesem Beitrag wird das selbstoptimierende Spurführungsmodul näher untersucht.
    Das Spurführungsmodul ist Bestandteil eines innovativen schienengebundenen Verkehrssystems,
    genannt RailCab, und dient zur Lenkung des einzelnen Fahrzeugs. Ziele des Spurführungsmoduls
    bestehen darin, die Verlässlichkeit des Spurführungsmoduls zu erhöhen sowie möglichst
    wenig Energie zu verbrauchen. Um kritische Systemzustände zu erkennen bzw. frühzeitig
    zu verhindern wird eine Vorgehensweise zur Einrichtung einer Zustandsüberwachung
    für selbstoptimierende Systeme beschrieben. Diese wird auf dem realen Versuchsträger
    im Maßstab 1:2,5 implementiert. Die Auswertung von Versuchsfahrten zeigt, dass
    gerade beim Auftreten eines Fehlers das Umschalten vom Ziel ''Energieverbrauch
    minimieren`` auf das Ziel ''Verlässlichkeit maximieren`` sinnvoll ist.
author:
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Jens
  full_name: Geisler, Jens
  last_name: Geisler
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  last_name: Trächtler
citation:
  ama: 'Sondermann-Wölke C, Sextro W, Geisler J, Trächtler A. Experimentelle Untersuchung
    der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls. In: Gausemeier
    J, Rammig FJ, Trächtler A, eds. <i>Entwurf Mechatronischer Systeme</i>. Vol 272.
    HNI-Verlagsschriftenreihe. Paderborn; 2010:411-420.'
  apa: Sondermann-Wölke, C., Sextro, W., Geisler, J., &#38; Trächtler, A. (2010).
    Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls.
    In J. Gausemeier, F. J. Rammig, &#38; A. Trächtler (Eds.), <i>Entwurf mechatronischer
    Systeme</i> (Vol. 272, pp. 411–420). Paderborn.
  bibtex: '@inproceedings{Sondermann-Wölke_Sextro_Geisler_Trächtler_2010, place={Paderborn},
    series={HNI-Verlagsschriftenreihe}, title={Experimentelle Untersuchung der Selbstoptimierung
    innerhalb des RailCab-Spurführungsmoduls}, volume={272}, booktitle={Entwurf mechatronischer
    Systeme}, author={Sondermann-Wölke, Christoph and Sextro, Walter and Geisler,
    Jens and Trächtler, Ansgar}, editor={Gausemeier, Jürgen and Rammig, Frans Josef
    and Trächtler, AnsgarEditors}, year={2010}, pages={411–420}, collection={HNI-Verlagsschriftenreihe}
    }'
  chicago: Sondermann-Wölke, Christoph, Walter Sextro, Jens Geisler, and Ansgar Trächtler.
    “Experimentelle Untersuchung Der Selbstoptimierung Innerhalb Des RailCab-Spurführungsmoduls.”
    In <i>Entwurf Mechatronischer Systeme</i>, edited by Jürgen Gausemeier, Frans
    Josef Rammig, and Ansgar Trächtler, 272:411–20. HNI-Verlagsschriftenreihe. Paderborn,
    2010.
  ieee: C. Sondermann-Wölke, W. Sextro, J. Geisler, and A. Trächtler, “Experimentelle
    Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls,”
    in <i>Entwurf mechatronischer Systeme</i>, 2010, vol. 272, pp. 411–420.
  mla: Sondermann-Wölke, Christoph, et al. “Experimentelle Untersuchung Der Selbstoptimierung
    Innerhalb Des RailCab-Spurführungsmoduls.” <i>Entwurf Mechatronischer Systeme</i>,
    edited by Jürgen Gausemeier et al., vol. 272, 2010, pp. 411–20.
  short: 'C. Sondermann-Wölke, W. Sextro, J. Geisler, A. Trächtler, in: J. Gausemeier,
    F.J. Rammig, A. Trächtler (Eds.), Entwurf Mechatronischer Systeme, Paderborn,
    2010, pp. 411–420.'
date_created: 2019-05-13T10:28:04Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
editor:
- first_name: Jürgen
  full_name: Gausemeier, Jürgen
  last_name: Gausemeier
- first_name: Frans Josef
  full_name: Rammig, Frans Josef
  last_name: Rammig
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  last_name: Trächtler
intvolume: '       272'
keyword:
- Selbstoptimierung
- Spurführungsmodul
language:
- iso: eng
page: 411 - 420
place: Paderborn
publication: Entwurf mechatronischer Systeme
quality_controlled: '1'
series_title: HNI-Verlagsschriftenreihe
status: public
title: Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls
type: conference
user_id: '55222'
volume: 272
year: '2010'
...
---
_id: '9763'
abstract:
- lang: eng
  text: Recent advances in information processing enable new kinds of technical systems,
    called self-optimizing systems. These systems are able to adapt their objectives
    and their behavior according to the current situation and influences autonomously.
    This behavior adaptation is non-deterministic and hence self-optimization is a
    risk to the system, e.g. if the result of the self-optimization process does not
    match the suddenly changed situation. In contrary, self-optimization could be
    used to increase the dependability by pursuing objectives like reliability and
    availability. In our preceding publications we introduced the so called multi-level
    dependability concept to cope with this new kind of systems (cf. [6]). This concept
    comprises the monitoring of the system behavior, the classification of the current
    situation, and the selection of the appropriate measure, if reliability limits
    are exceeded. In this paper we present for the first time experimental results.
    The dependability concept is implemented in the self-optimizing active guidance
    system of a railway vehicle. The test drives illustrate clearly that the proposed
    concept is able to cope with, e.g., sensor failures, and is able to increase the
    reliability and availability of the active guidance module.
author:
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Jens
  full_name: Geisler, Jens
  last_name: Geisler
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: 'Sondermann-Wölke C, Geisler J, Sextro W. Increasing the reliability of a self-optimizing
    railway guidance system. In: <i>Reliability and Maintainability Symposium (RAMS),
    2010 Proceedings - Annual</i>. ; 2010:1-6. doi:<a href="https://doi.org/10.1109/RAMS.2010.5448080">10.1109/RAMS.2010.5448080</a>'
  apa: Sondermann-Wölke, C., Geisler, J., &#38; Sextro, W. (2010). Increasing the
    reliability of a self-optimizing railway guidance system. In <i>Reliability and
    Maintainability Symposium (RAMS), 2010 Proceedings - Annual</i> (pp. 1–6). <a
    href="https://doi.org/10.1109/RAMS.2010.5448080">https://doi.org/10.1109/RAMS.2010.5448080</a>
  bibtex: '@inproceedings{Sondermann-Wölke_Geisler_Sextro_2010, title={Increasing
    the reliability of a self-optimizing railway guidance system}, DOI={<a href="https://doi.org/10.1109/RAMS.2010.5448080">10.1109/RAMS.2010.5448080</a>},
    booktitle={Reliability and Maintainability Symposium (RAMS), 2010 Proceedings
    - Annual}, author={Sondermann-Wölke, Christoph and Geisler, Jens and Sextro, Walter},
    year={2010}, pages={1–6} }'
  chicago: Sondermann-Wölke, Christoph, Jens Geisler, and Walter Sextro. “Increasing
    the Reliability of a Self-Optimizing Railway Guidance System.” In <i>Reliability
    and Maintainability Symposium (RAMS), 2010 Proceedings - Annual</i>, 1–6, 2010.
    <a href="https://doi.org/10.1109/RAMS.2010.5448080">https://doi.org/10.1109/RAMS.2010.5448080</a>.
  ieee: C. Sondermann-Wölke, J. Geisler, and W. Sextro, “Increasing the reliability
    of a self-optimizing railway guidance system,” in <i>Reliability and Maintainability
    Symposium (RAMS), 2010 Proceedings - Annual</i>, 2010, pp. 1–6.
  mla: Sondermann-Wölke, Christoph, et al. “Increasing the Reliability of a Self-Optimizing
    Railway Guidance System.” <i>Reliability and Maintainability Symposium (RAMS),
    2010 Proceedings - Annual</i>, 2010, pp. 1–6, doi:<a href="https://doi.org/10.1109/RAMS.2010.5448080">10.1109/RAMS.2010.5448080</a>.
  short: 'C. Sondermann-Wölke, J. Geisler, W. Sextro, in: Reliability and Maintainability
    Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6.'
date_created: 2019-05-13T10:35:39Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1109/RAMS.2010.5448080
keyword:
- availability
- dependability concept
- multilevel dependability concept
- railway vehicle
- reliability
- self optimizing active guidance system
- self optimizing railway guidance system
- situation classification
- system behavior monitoring
- optimal control
- railways
- reliability theory
- self-adjusting systems
language:
- iso: eng
page: 1 -6
publication: Reliability and Maintainability Symposium (RAMS), 2010 Proceedings -
  Annual
publication_identifier:
  issn:
  - 0149-144X
quality_controlled: '1'
status: public
title: Increasing the reliability of a self-optimizing railway guidance system
type: conference
user_id: '55222'
year: '2010'
...
---
_id: '9764'
author:
- first_name: Christoph
  full_name: Tomberger, Christoph
  last_name: Tomberger
- first_name: Peter
  full_name: Dietmaier, Peter
  last_name: Dietmaier
- first_name: Rosenberger
  full_name: Martin, Rosenberger
  last_name: Martin
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Klaus
  full_name: Six, Klaus
  last_name: Six
citation:
  ama: Tomberger C, Dietmaier P, Martin R, Sextro W, Six K. Einfluss von Oberflächenrauheit,
    fluiden Zwischenschichten und Kontakttemperaturen auf den Kraftschluss zwischen
    Rad und Schiene. <i>ZEVrail</i>. 2010;134:127-135.
  apa: Tomberger, C., Dietmaier, P., Martin, R., Sextro, W., &#38; Six, K. (2010).
    Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen
    auf den Kraftschluss zwischen Rad und Schiene. <i>ZEVrail</i>, <i>134</i>, 127–135.
  bibtex: '@article{Tomberger_Dietmaier_Martin_Sextro_Six_2010, title={Einfluss von
    Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den
    Kraftschluss zwischen Rad und Schiene}, volume={134}, journal={ZEVrail}, author={Tomberger,
    Christoph and Dietmaier, Peter and Martin, Rosenberger and Sextro, Walter and
    Six, Klaus}, year={2010}, pages={127–135} }'
  chicago: 'Tomberger, Christoph, Peter Dietmaier, Rosenberger Martin, Walter Sextro,
    and Klaus Six. “Einfluss von Oberflächenrauheit, Fluiden Zwischenschichten Und
    Kontakttemperaturen Auf Den Kraftschluss Zwischen Rad Und Schiene.” <i>ZEVrail</i>
    134 (2010): 127–35.'
  ieee: C. Tomberger, P. Dietmaier, R. Martin, W. Sextro, and K. Six, “Einfluss von
    Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den
    Kraftschluss zwischen Rad und Schiene,” <i>ZEVrail</i>, vol. 134, pp. 127–135,
    2010.
  mla: Tomberger, Christoph, et al. “Einfluss von Oberflächenrauheit, Fluiden Zwischenschichten
    Und Kontakttemperaturen Auf Den Kraftschluss Zwischen Rad Und Schiene.” <i>ZEVrail</i>,
    vol. 134, 2010, pp. 127–35.
  short: C. Tomberger, P. Dietmaier, R. Martin, W. Sextro, K. Six, ZEVrail 134 (2010)
    127–135.
date_created: 2019-05-13T10:37:07Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
intvolume: '       134'
language:
- iso: eng
page: 127-135
publication: ZEVrail
publication_identifier:
  issn:
  - 0043-1648
status: public
title: Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen
  auf den Kraftschluss zwischen Rad und Schiene
type: journal_article
user_id: '55222'
volume: 134
year: '2010'
...
---
_id: '9742'
abstract:
- lang: eng
  text: New mechatronic systems, called self-optimizing systems, are able to adapt
    their behavior according to environmental, user and system specific influences.
    Self-optimizing systems are complex and due to their non-deterministic behavior
    comprise hidden risks, which cannot be foreseen in the design phase of the system.
    Therefore, this paper presents modifications of the current condition monitoring
    policy, to be able to cope with this new kind of systems. Beside avoiding critical
    situations evoked by self-optimization, the proposed concept uses self-optimization
    to increase the dependability of the system. In this case, the concept is applied
    to the active guidance module of an innovative rail-bound vehicle.
author:
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: 'Sondermann-Wölke C, Sextro W. Towards the Integration of Condition Monitoring
    in Self-Optimizing Function Modules. In: <i>Future Computing, Service Computation,
    Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation
    World:</i> ; 2009:15-20. doi:<a href="https://doi.org/10.1109/ComputationWorld.2009.47">10.1109/ComputationWorld.2009.47</a>'
  apa: Sondermann-Wölke, C., &#38; Sextro, W. (2009). Towards the Integration of Condition
    Monitoring in Self-Optimizing Function Modules. In <i>Future Computing, Service
    Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09.
    Computation World:</i> (pp. 15–20). <a href="https://doi.org/10.1109/ComputationWorld.2009.47">https://doi.org/10.1109/ComputationWorld.2009.47</a>
  bibtex: '@inproceedings{Sondermann-Wölke_Sextro_2009, title={Towards the Integration
    of Condition Monitoring in Self-Optimizing Function Modules}, DOI={<a href="https://doi.org/10.1109/ComputationWorld.2009.47">10.1109/ComputationWorld.2009.47</a>},
    booktitle={Future Computing, Service Computation, Cognitive, Adaptive, Content,
    Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:}, author={Sondermann-Wölke,
    Christoph and Sextro, Walter}, year={2009}, pages={15–20} }'
  chicago: Sondermann-Wölke, Christoph, and Walter Sextro. “Towards the Integration
    of Condition Monitoring in Self-Optimizing Function Modules.” In <i>Future Computing,
    Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD
    ’09. Computation World:</i>, 15–20, 2009. <a href="https://doi.org/10.1109/ComputationWorld.2009.47">https://doi.org/10.1109/ComputationWorld.2009.47</a>.
  ieee: C. Sondermann-Wölke and W. Sextro, “Towards the Integration of Condition Monitoring
    in Self-Optimizing Function Modules,” in <i>Future Computing, Service Computation,
    Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation
    World:</i>, 2009, pp. 15–20.
  mla: Sondermann-Wölke, Christoph, and Walter Sextro. “Towards the Integration of
    Condition Monitoring in Self-Optimizing Function Modules.” <i>Future Computing,
    Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD
    ’09. Computation World:</i>, 2009, pp. 15–20, doi:<a href="https://doi.org/10.1109/ComputationWorld.2009.47">10.1109/ComputationWorld.2009.47</a>.
  short: 'C. Sondermann-Wölke, W. Sextro, in: Future Computing, Service Computation,
    Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation
    World:, 2009, pp. 15–20.'
date_created: 2019-05-13T09:31:52Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1109/ComputationWorld.2009.47
keyword:
- condition monitoring
- mechatronic systems
- rail bound vehicle
- rail guidance module
- self-optimization
- self-optimizing function modules
- condition monitoring
- mechatronics
- railway rolling stock
- self-adjusting systems
language:
- iso: eng
page: 15 -20
publication: 'Future Computing, Service Computation, Cognitive, Adaptive, Content,
  Patterns, 2009. COMPUTATIONWORLD ''09. Computation World:'
status: public
title: Towards the Integration of Condition Monitoring in Self-Optimizing Function
  Modules
type: conference
user_id: '55222'
year: '2009'
...
---
_id: '9560'
author:
- first_name: Anton
  full_name: Tonchev, Anton
  last_name: Tonchev
- first_name: Wolfgang
  full_name: Hirschberg, Wolfgang
  last_name: Hirschberg
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Zoltan
  full_name: Major, Zoltan
  last_name: Major
- first_name: Josef
  full_name: Neges, Josef
  last_name: Neges
citation:
  ama: 'Tonchev A, Hirschberg W, Sextro W, Major Z, Neges J. Modellierung der Hysterese-
    und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe. In: <i>27. Internationales
    Mju-Symposium/Bremsen-Fachtagung</i>. 12. Bad Neuenahr: VDI Verlag GmbH; 2007:29-49.'
  apa: 'Tonchev, A., Hirschberg, W., Sextro, W., Major, Z., &#38; Neges, J. (2007).
    Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe.
    In <i>27. Internationales Mju-Symposium/Bremsen-Fachtagung</i> (pp. 29–49). Bad
    Neuenahr: VDI Verlag GmbH.'
  bibtex: '@inproceedings{Tonchev_Hirschberg_Sextro_Major_Neges_2007, place={Bad Neuenahr},
    series={12}, title={Modellierung der Hysterese- und Adhäsionseffekte zwischen
    Bremsbelag und Bremsscheibe}, number={657}, booktitle={27. Internationales Mju-Symposium/Bremsen-Fachtagung},
    publisher={VDI Verlag GmbH}, author={Tonchev, Anton and Hirschberg, Wolfgang and
    Sextro, Walter and Major, Zoltan and Neges, Josef}, year={2007}, pages={29–49},
    collection={12} }'
  chicago: 'Tonchev, Anton, Wolfgang Hirschberg, Walter Sextro, Zoltan Major, and
    Josef Neges. “Modellierung Der Hysterese- Und Adhäsionseffekte Zwischen Bremsbelag
    Und Bremsscheibe.” In <i>27. Internationales Mju-Symposium/Bremsen-Fachtagung</i>,
    29–49. 12. Bad Neuenahr: VDI Verlag GmbH, 2007.'
  ieee: A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, and J. Neges, “Modellierung
    der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe,” in
    <i>27. Internationales Mju-Symposium/Bremsen-Fachtagung</i>, 2007, no. 657, pp.
    29–49.
  mla: Tonchev, Anton, et al. “Modellierung Der Hysterese- Und Adhäsionseffekte Zwischen
    Bremsbelag Und Bremsscheibe.” <i>27. Internationales Mju-Symposium/Bremsen-Fachtagung</i>,
    no. 657, VDI Verlag GmbH, 2007, pp. 29–49.
  short: 'A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, J. Neges, in: 27. Internationales
    Mju-Symposium/Bremsen-Fachtagung, VDI Verlag GmbH, Bad Neuenahr, 2007, pp. 29–49.'
date_created: 2019-04-29T10:03:13Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
issue: '657'
language:
- iso: eng
page: 29 - 49
place: Bad Neuenahr
publication: 27. Internationales Mju-Symposium/Bremsen-Fachtagung
publisher: VDI Verlag GmbH
series_title: '12'
status: public
title: Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe
type: conference
user_id: '55222'
year: '2007'
...
---
_id: '9561'
author:
- first_name: Anton
  full_name: Tonchev, Anton
  last_name: Tonchev
- first_name: Wolfgang
  full_name: Hirschberg, Wolfgang
  last_name: Hirschberg
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Zoltan
  full_name: Major, Zoltan
  last_name: Major
- first_name: Josef
  full_name: Neges, Josef
  last_name: Neges
citation:
  ama: 'Tonchev A, Hirschberg W, Sextro W, Major Z, Neges J. Modelling of Hysteresis
    and Adhesion Effects between Brake Pad and Disc. In: <i>27. Internationales Mju-Symposium/Bremsen-Fachtagung</i>.
    12. Bad Neuenahr: VDI Verlag GmbH; 2007:144-163.'
  apa: 'Tonchev, A., Hirschberg, W., Sextro, W., Major, Z., &#38; Neges, J. (2007).
    Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc. In <i>27.
    Internationales Mju-Symposium/Bremsen-Fachtagung</i> (pp. 144–163). Bad Neuenahr:
    VDI Verlag GmbH.'
  bibtex: '@inproceedings{Tonchev_Hirschberg_Sextro_Major_Neges_2007, place={Bad Neuenahr},
    series={12}, title={Modelling of Hysteresis and Adhesion Effects between Brake
    Pad and Disc}, number={657}, booktitle={27. Internationales Mju-Symposium/Bremsen-Fachtagung},
    publisher={VDI Verlag GmbH}, author={Tonchev, Anton and Hirschberg, Wolfgang and
    Sextro, Walter and Major, Zoltan and Neges, Josef}, year={2007}, pages={144–163},
    collection={12} }'
  chicago: 'Tonchev, Anton, Wolfgang Hirschberg, Walter Sextro, Zoltan Major, and
    Josef Neges. “Modelling of Hysteresis and Adhesion Effects between Brake Pad and
    Disc.” In <i>27. Internationales Mju-Symposium/Bremsen-Fachtagung</i>, 144–63.
    12. Bad Neuenahr: VDI Verlag GmbH, 2007.'
  ieee: A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, and J. Neges, “Modelling of
    Hysteresis and Adhesion Effects between Brake Pad and Disc,” in <i>27. Internationales
    Mju-Symposium/Bremsen-Fachtagung</i>, 2007, no. 657, pp. 144–163.
  mla: Tonchev, Anton, et al. “Modelling of Hysteresis and Adhesion Effects between
    Brake Pad and Disc.” <i>27. Internationales Mju-Symposium/Bremsen-Fachtagung</i>,
    no. 657, VDI Verlag GmbH, 2007, pp. 144–63.
  short: 'A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, J. Neges, in: 27. Internationales
    Mju-Symposium/Bremsen-Fachtagung, VDI Verlag GmbH, Bad Neuenahr, 2007, pp. 144–163.'
date_created: 2019-04-29T10:08:11Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
issue: '657'
language:
- iso: eng
page: 144-163
place: Bad Neuenahr
publication: 27. Internationales Mju-Symposium/Bremsen-Fachtagung
publisher: VDI Verlag GmbH
series_title: '12'
status: public
title: Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc
type: conference
user_id: '55222'
year: '2007'
...
---
_id: '9563'
author:
- first_name: Alexander
  full_name: Genzo, Alexander
  last_name: Genzo
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Lars
  full_name: Panning, Lars
  last_name: Panning
citation:
  ama: 'Genzo A, Sextro W, Panning L. Schwingungsverhalten elastischer Körper mit
    nichtlinearen Kopplungen in ausgedehnten Reibkontakten. In: <i>VDI-Berichte</i>.
    Vol 2022. Düsseldorf: VDI Verlag GmbH; 2007:147-161.'
  apa: 'Genzo, A., Sextro, W., &#38; Panning, L. (2007). Schwingungsverhalten elastischer
    Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten. In <i>VDI-Berichte</i>
    (Vol. 2022, pp. 147–161). Düsseldorf: VDI Verlag GmbH.'
  bibtex: '@inproceedings{Genzo_Sextro_Panning_2007, place={Düsseldorf}, title={Schwingungsverhalten
    elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten},
    volume={2022}, booktitle={VDI-Berichte}, publisher={VDI Verlag GmbH}, author={Genzo,
    Alexander and Sextro, Walter and Panning, Lars}, year={2007}, pages={147–161}
    }'
  chicago: 'Genzo, Alexander, Walter Sextro, and Lars Panning. “Schwingungsverhalten
    Elastischer Körper Mit Nichtlinearen Kopplungen in Ausgedehnten Reibkontakten.”
    In <i>VDI-Berichte</i>, 2022:147–61. Düsseldorf: VDI Verlag GmbH, 2007.'
  ieee: A. Genzo, W. Sextro, and L. Panning, “Schwingungsverhalten elastischer Körper
    mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten,” in <i>VDI-Berichte</i>,
    2007, vol. 2022, pp. 147–161.
  mla: Genzo, Alexander, et al. “Schwingungsverhalten Elastischer Körper Mit Nichtlinearen
    Kopplungen in Ausgedehnten Reibkontakten.” <i>VDI-Berichte</i>, vol. 2022, VDI
    Verlag GmbH, 2007, pp. 147–61.
  short: 'A. Genzo, W. Sextro, L. Panning, in: VDI-Berichte, VDI Verlag GmbH, Düsseldorf,
    2007, pp. 147–161.'
date_created: 2019-04-29T10:17:42Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
intvolume: '      2022'
language:
- iso: eng
page: 147-161
place: Düsseldorf
publication: VDI-Berichte
publisher: VDI Verlag GmbH
status: public
title: Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten
  Reibkontakten
type: conference
user_id: '55222'
volume: 2022
year: '2007'
...
---
_id: '9567'
abstract:
- lang: eng
  text: Numerical predictions of the forced vibration of a disk assembly including
    frictional effects between the shrouds are presented concerning engineering needs
    for the blade design process. Assuming a tuned disk assembly, numerical static,
    free, and then forced vibration analyses of a shrouded turbine blade measured
    in the spin pit are performed systematically. For the excitation forces of an
    air jet evaluated from the fairly linear behavior of the experimental blade resonance
    peaks, the reliability of the proposed approach is validated through the very
    close agreement of the computed and measured resonant peaks. These resonant peaks
    demonstrate either a fairly linear behavior or a nonlinear one like the jump effect
    of blade resonance amplitudes, or elastic impacts between the shrouds. Also, the
    damping performance for different contact configurations between the shrouds is
    numerically analyzed. These numerical results indicate that the shrouds generate
    higher frictional damping for small angles (0{\^a}30deg) between the circumferential
    direction and the normal vector to the contact surface.
author:
- first_name: J
  full_name: Szwedowicz, J
  last_name: Szwedowicz
- first_name: R
  full_name: Visser, R
  last_name: Visser
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: P. A
  full_name: Masserey, P. A
  last_name: Masserey
citation:
  ama: Szwedowicz J, Visser R, Sextro W, Masserey PA. On Nonlinear Forced Vibration
    of Shrouded Turbine Blades. <i>Journal of Turbomachinery</i>. 2007;130(1):011002-011002.
  apa: Szwedowicz, J., Visser, R., Sextro, W., &#38; Masserey, P. A. (2007). On Nonlinear
    Forced Vibration of Shrouded Turbine Blades. <i>Journal of Turbomachinery</i>,
    <i>130</i>(1), 011002–011002.
  bibtex: '@article{Szwedowicz_Visser_Sextro_Masserey_2007, title={On Nonlinear Forced
    Vibration of Shrouded Turbine Blades}, volume={130}, number={1}, journal={Journal
    of Turbomachinery}, author={Szwedowicz, J and Visser, R and Sextro, Walter and
    Masserey, P. A}, year={2007}, pages={011002–011002} }'
  chicago: 'Szwedowicz, J, R Visser, Walter Sextro, and P. A Masserey. “On Nonlinear
    Forced Vibration of Shrouded Turbine Blades.” <i>Journal of Turbomachinery</i>
    130, no. 1 (2007): 011002–011002.'
  ieee: J. Szwedowicz, R. Visser, W. Sextro, and P. A. Masserey, “On Nonlinear Forced
    Vibration of Shrouded Turbine Blades,” <i>Journal of Turbomachinery</i>, vol.
    130, no. 1, pp. 011002–011002, 2007.
  mla: Szwedowicz, J., et al. “On Nonlinear Forced Vibration of Shrouded Turbine Blades.”
    <i>Journal of Turbomachinery</i>, vol. 130, no. 1, 2007, pp. 011002–011002.
  short: J. Szwedowicz, R. Visser, W. Sextro, P.A. Masserey, Journal of Turbomachinery
    130 (2007) 011002–011002.
date_created: 2019-04-29T10:25:57Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
intvolume: '       130'
issue: '1'
language:
- iso: eng
page: 011002-011002
publication: Journal of Turbomachinery
publication_identifier:
  issn:
  - 0889-504X
quality_controlled: '1'
status: public
title: On Nonlinear Forced Vibration of Shrouded Turbine Blades
type: journal_article
user_id: '55222'
volume: 130
year: '2007'
...
---
_id: '9535'
author:
- first_name: Alexander
  full_name: Genzo, Alexander
  last_name: Genzo
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: 'Genzo A, Sextro W. Dynamic Behaviour of Elastic Bodies Coupled by Extended
    Friction Contacts. In: <i>Proceedings of ISMA - International Conference on Noise
    and Vibration Engineering</i>. ; 2006:51-52.'
  apa: Genzo, A., &#38; Sextro, W. (2006). Dynamic Behaviour of Elastic Bodies Coupled
    by Extended Friction Contacts. In <i>Proceedings of ISMA - International conference
    on noise and vibration engineering</i> (pp. 51–52).
  bibtex: '@inproceedings{Genzo_Sextro_2006, title={Dynamic Behaviour of Elastic Bodies
    Coupled by Extended Friction Contacts}, booktitle={Proceedings of ISMA - International
    conference on noise and vibration engineering}, author={Genzo, Alexander and Sextro,
    Walter}, year={2006}, pages={51–52} }'
  chicago: Genzo, Alexander, and Walter Sextro. “Dynamic Behaviour of Elastic Bodies
    Coupled by Extended Friction Contacts.” In <i>Proceedings of ISMA - International
    Conference on Noise and Vibration Engineering</i>, 51–52, 2006.
  ieee: A. Genzo and W. Sextro, “Dynamic Behaviour of Elastic Bodies Coupled by Extended
    Friction Contacts,” in <i>Proceedings of ISMA - International conference on noise
    and vibration engineering</i>, 2006, pp. 51–52.
  mla: Genzo, Alexander, and Walter Sextro. “Dynamic Behaviour of Elastic Bodies Coupled
    by Extended Friction Contacts.” <i>Proceedings of ISMA - International Conference
    on Noise and Vibration Engineering</i>, 2006, pp. 51–52.
  short: 'A. Genzo, W. Sextro, in: Proceedings of ISMA - International Conference
    on Noise and Vibration Engineering, 2006, pp. 51–52.'
date_created: 2019-04-29T08:54:27Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
keyword:
- Noise
- Vibration engineering
language:
- iso: eng
page: 51-52
publication: Proceedings of ISMA - International conference on noise and vibration
  engineering
status: public
title: Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts
type: conference
user_id: '55222'
year: '2006'
...
---
_id: '9536'
abstract:
- lang: eng
  text: This paper presents a model for unsteady longitudinal slippage of a loaded
    rubber wheel. The aim of modelling was to calculate the dynamical contact behavior
    in a numerical efficient way. Further on, simulation results are compared to experimental
    data.
author:
- first_name: F
  full_name: Gutzeit, F
  last_name: Gutzeit
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Matthias
  full_name: Kröger, Matthias
  last_name: Kröger
citation:
  ama: 'Gutzeit F, Sextro W, Kröger M. Unsteady rolling contact of rubber wheels.
    In: Wriggers P, Nackenhorst U, eds. <i>Analysis and Simulation of Contact Problems</i>.
    Vol 27. Lecture Notes in Applied and Computational Mechanics. Springer Berlin
    Heidelberg; 2006:261-270. doi:<a href="https://doi.org/10.1007/3-540-31761-9_29">10.1007/3-540-31761-9_29</a>'
  apa: Gutzeit, F., Sextro, W., &#38; Kröger, M. (2006). Unsteady rolling contact
    of rubber wheels. In P. Wriggers &#38; U. Nackenhorst (Eds.), <i>Analysis and
    Simulation of Contact Problems</i> (Vol. 27, pp. 261–270). Springer Berlin Heidelberg.
    <a href="https://doi.org/10.1007/3-540-31761-9_29">https://doi.org/10.1007/3-540-31761-9_29</a>
  bibtex: '@inbook{Gutzeit_Sextro_Kröger_2006, series={Lecture Notes in Applied and
    Computational Mechanics}, title={Unsteady rolling contact of rubber wheels}, volume={27},
    DOI={<a href="https://doi.org/10.1007/3-540-31761-9_29">10.1007/3-540-31761-9_29</a>},
    booktitle={Analysis and Simulation of Contact Problems}, publisher={Springer Berlin
    Heidelberg}, author={Gutzeit, F and Sextro, Walter and Kröger, Matthias}, editor={Wriggers,
    Peter and Nackenhorst, UdoEditors}, year={2006}, pages={261–270}, collection={Lecture
    Notes in Applied and Computational Mechanics} }'
  chicago: Gutzeit, F, Walter Sextro, and Matthias Kröger. “Unsteady Rolling Contact
    of Rubber Wheels.” In <i>Analysis and Simulation of Contact Problems</i>, edited
    by Peter Wriggers and Udo Nackenhorst, 27:261–70. Lecture Notes in Applied and
    Computational Mechanics. Springer Berlin Heidelberg, 2006. <a href="https://doi.org/10.1007/3-540-31761-9_29">https://doi.org/10.1007/3-540-31761-9_29</a>.
  ieee: F. Gutzeit, W. Sextro, and M. Kröger, “Unsteady rolling contact of rubber
    wheels,” in <i>Analysis and Simulation of Contact Problems</i>, vol. 27, P. Wriggers
    and U. Nackenhorst, Eds. Springer Berlin Heidelberg, 2006, pp. 261–270.
  mla: Gutzeit, F., et al. “Unsteady Rolling Contact of Rubber Wheels.” <i>Analysis
    and Simulation of Contact Problems</i>, edited by Peter Wriggers and Udo Nackenhorst,
    vol. 27, Springer Berlin Heidelberg, 2006, pp. 261–70, doi:<a href="https://doi.org/10.1007/3-540-31761-9_29">10.1007/3-540-31761-9_29</a>.
  short: 'F. Gutzeit, W. Sextro, M. Kröger, in: P. Wriggers, U. Nackenhorst (Eds.),
    Analysis and Simulation of Contact Problems, Springer Berlin Heidelberg, 2006,
    pp. 261–270.'
date_created: 2019-04-29T08:55:49Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1007/3-540-31761-9_29
editor:
- first_name: Peter
  full_name: Wriggers, Peter
  last_name: Wriggers
- first_name: Udo
  full_name: Nackenhorst, Udo
  last_name: Nackenhorst
intvolume: '        27'
language:
- iso: eng
page: 261-270
publication: Analysis and Simulation of Contact Problems
publication_identifier:
  isbn:
  - 978-3-540-31760-9
publisher: Springer Berlin Heidelberg
quality_controlled: '1'
series_title: Lecture Notes in Applied and Computational Mechanics
status: public
title: Unsteady rolling contact of rubber wheels
type: book_chapter
user_id: '55222'
volume: 27
year: '2006'
...
---
_id: '9542'
author:
- first_name: Adolf
  full_name: Hofmeisterro, Adolf
  last_name: Hofmeisterro
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Otto
  full_name: Röschel, Otto
  last_name: Röschel
citation:
  ama: 'Hofmeisterro A, Sextro W, Röschel O. Error-Workspace Analysis of Plane Mechanisms.
    In: <i>Proceedings of EUCOMES, the First European Conference on Mechanism Science</i>.
    Obergurgl, {\"O}sterreich; 2006:1-12.'
  apa: Hofmeisterro, A., Sextro, W., &#38; Röschel, O. (2006). Error-Workspace Analysis
    of Plane Mechanisms. In <i>Proceedings of EUCOMES, the first European Conference
    on Mechanism Science</i> (pp. 1–12). Obergurgl, {\"O}sterreich.
  bibtex: '@inproceedings{Hofmeisterro_Sextro_Röschel_2006, place={Obergurgl, {\"O}sterreich},
    title={Error-Workspace Analysis of Plane Mechanisms}, booktitle={Proceedings of
    EUCOMES, the first European Conference on Mechanism Science}, author={Hofmeisterro,
    Adolf and Sextro, Walter and Röschel, Otto}, year={2006}, pages={1–12} }'
  chicago: Hofmeisterro, Adolf, Walter Sextro, and Otto Röschel. “Error-Workspace
    Analysis of Plane Mechanisms.” In <i>Proceedings of EUCOMES, the First European
    Conference on Mechanism Science</i>, 1–12. Obergurgl, {\"O}sterreich, 2006.
  ieee: A. Hofmeisterro, W. Sextro, and O. Röschel, “Error-Workspace Analysis of Plane
    Mechanisms,” in <i>Proceedings of EUCOMES, the first European Conference on Mechanism
    Science</i>, 2006, pp. 1–12.
  mla: Hofmeisterro, Adolf, et al. “Error-Workspace Analysis of Plane Mechanisms.”
    <i>Proceedings of EUCOMES, the First European Conference on Mechanism Science</i>,
    2006, pp. 1–12.
  short: 'A. Hofmeisterro, W. Sextro, O. Röschel, in: Proceedings of EUCOMES, the
    First European Conference on Mechanism Science, Obergurgl, {\"O}sterreich, 2006,
    pp. 1–12.'
date_created: 2019-04-29T09:25:17Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
language:
- iso: eng
page: 1-12
place: Obergurgl, {\"O}sterreich
publication: Proceedings of EUCOMES, the first European Conference on Mechanism Science
status: public
title: Error-Workspace Analysis of Plane Mechanisms
type: conference
user_id: '55222'
year: '2006'
...
---
_id: '9551'
abstract:
- lang: eng
  text: Friction occurs in the contact between tyre and road. The friction of rubber
    material on dry surfaces is dominated by hysteresis and adhesion effects. Hysterisis
    friction is characterised by the energy dissipation within the visco-elastic material,
    which is caused by its deformation while passing the surface roughness. Hysteresis
    effects are modelled by an extended linear visco-elastic material with several
    Maxwell elements. The development of a model in the time domain allows to consider
    nonlinear effects. Additionally temperature effects are taken into account based
    on the WLF-transformation. Adhesion forces originate from molecular bindings between
    the contact partners. This effect is simulated by applying a modified model of
    Achenbach on real surfaces. The temperature distribution within the friction contact
    region is investigated experimentally as well. Furthermore global stick-slip vibrations
    of a rubber block element are investigated using a global contact model. Numerical
    results are compared with experiments performed on a tribometer test rig.
author:
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Patrick
  full_name: Moldenhauer, Patrick
  last_name: Moldenhauer
- first_name: M
  full_name: Wangenheim, M
  last_name: Wangenheim
- first_name: Markus
  full_name: Lindner, Markus
  last_name: Lindner
- first_name: Matthias
  full_name: Kröger, Matthias
  last_name: Kröger
citation:
  ama: 'Sextro W, Moldenhauer P, Wangenheim M, Lindner M, Kröger M. Contact behaviour
    of a sliding rubber element. In: Wriggers P, Nackenhorst U, eds. <i>Analysis and
    Simulation of Contact Problems</i>. Vol 27. Lecture Notes in Applied and Computational
    Mechanics. Springer Berlin Heidelberg; 2006:243-252. doi:<a href="https://doi.org/10.1007/3-540-31761-9_27">10.1007/3-540-31761-9_27</a>'
  apa: Sextro, W., Moldenhauer, P., Wangenheim, M., Lindner, M., &#38; Kröger, M.
    (2006). Contact behaviour of a sliding rubber element. In P. Wriggers &#38; U.
    Nackenhorst (Eds.), <i>Analysis and Simulation of Contact Problems</i> (Vol. 27,
    pp. 243–252). Springer Berlin Heidelberg. <a href="https://doi.org/10.1007/3-540-31761-9_27">https://doi.org/10.1007/3-540-31761-9_27</a>
  bibtex: '@inbook{Sextro_Moldenhauer_Wangenheim_Lindner_Kröger_2006, series={Lecture
    Notes in Applied and Computational Mechanics}, title={Contact behaviour of a sliding
    rubber element}, volume={27}, DOI={<a href="https://doi.org/10.1007/3-540-31761-9_27">10.1007/3-540-31761-9_27</a>},
    booktitle={Analysis and Simulation of Contact Problems}, publisher={Springer Berlin
    Heidelberg}, author={Sextro, Walter and Moldenhauer, Patrick and Wangenheim, M
    and Lindner, Markus and Kröger, Matthias}, editor={Wriggers, Peter and Nackenhorst,
    UdoEditors}, year={2006}, pages={243–252}, collection={Lecture Notes in Applied
    and Computational Mechanics} }'
  chicago: Sextro, Walter, Patrick Moldenhauer, M Wangenheim, Markus Lindner, and
    Matthias Kröger. “Contact Behaviour of a Sliding Rubber Element.” In <i>Analysis
    and Simulation of Contact Problems</i>, edited by Peter Wriggers and Udo Nackenhorst,
    27:243–52. Lecture Notes in Applied and Computational Mechanics. Springer Berlin
    Heidelberg, 2006. <a href="https://doi.org/10.1007/3-540-31761-9_27">https://doi.org/10.1007/3-540-31761-9_27</a>.
  ieee: W. Sextro, P. Moldenhauer, M. Wangenheim, M. Lindner, and M. Kröger, “Contact
    behaviour of a sliding rubber element,” in <i>Analysis and Simulation of Contact
    Problems</i>, vol. 27, P. Wriggers and U. Nackenhorst, Eds. Springer Berlin Heidelberg,
    2006, pp. 243–252.
  mla: Sextro, Walter, et al. “Contact Behaviour of a Sliding Rubber Element.” <i>Analysis
    and Simulation of Contact Problems</i>, edited by Peter Wriggers and Udo Nackenhorst,
    vol. 27, Springer Berlin Heidelberg, 2006, pp. 243–52, doi:<a href="https://doi.org/10.1007/3-540-31761-9_27">10.1007/3-540-31761-9_27</a>.
  short: 'W. Sextro, P. Moldenhauer, M. Wangenheim, M. Lindner, M. Kröger, in: P.
    Wriggers, U. Nackenhorst (Eds.), Analysis and Simulation of Contact Problems,
    Springer Berlin Heidelberg, 2006, pp. 243–252.'
date_created: 2019-04-29T09:42:01Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1007/3-540-31761-9_27
editor:
- first_name: Peter
  full_name: Wriggers, Peter
  last_name: Wriggers
- first_name: Udo
  full_name: Nackenhorst, Udo
  last_name: Nackenhorst
intvolume: '        27'
language:
- iso: eng
page: 243-252
publication: Analysis and Simulation of Contact Problems
publication_identifier:
  isbn:
  - 978-3-540-31760-9
publisher: Springer Berlin Heidelberg
series_title: Lecture Notes in Applied and Computational Mechanics
status: public
title: Contact behaviour of a sliding rubber element
type: book_chapter
user_id: '55222'
volume: 27
year: '2006'
...
---
_id: '9266'
abstract:
- lang: eng
  text: The present paper deals with the forced vibration analysis of a test structure.
    The test structure consists of two parts, an upper and a lower half pipe, joint
    in two bolted flanges which represent the extended friction contacts. Depending
    on the clamping loads different normal pressure distributions can be established
    in the contact interfaces. Since the test structure is loaded with a harmonic
    external force relative displacements occur in the contact interface. This leads
    to microslip effects affecting the dynamic behaviour. The experimental validation
    of the calculation method accounting for these effects is shown by comparing measured
    and calculated frequency response functions (FRF). ({\^A}{\copyright} 2005 WILEY-VCH
    Verlag GmbH & Co. KGaA, Weinheim)
author:
- first_name: Alexander
  full_name: Genzo, Alexander
  last_name: Genzo
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Karl
  full_name: Popp, Karl
  last_name: Popp
citation:
  ama: Genzo A, Sextro W, Popp K. Analysis of the Forced Vibration of Two Bolted Half-Pipes
    with Extended Friction Contacts. <i>PAMM</i>. 2005;5(1):91-92. doi:<a href="https://doi.org/10.1002/pamm.200510026">10.1002/pamm.200510026</a>
  apa: Genzo, A., Sextro, W., &#38; Popp, K. (2005). Analysis of the Forced Vibration
    of Two Bolted Half-Pipes with Extended Friction Contacts. <i>PAMM</i>, <i>5</i>(1),
    91–92. <a href="https://doi.org/10.1002/pamm.200510026">https://doi.org/10.1002/pamm.200510026</a>
  bibtex: '@article{Genzo_Sextro_Popp_2005, title={Analysis of the Forced Vibration
    of Two Bolted Half-Pipes with Extended Friction Contacts}, volume={5}, DOI={<a
    href="https://doi.org/10.1002/pamm.200510026">10.1002/pamm.200510026</a>}, number={1},
    journal={PAMM}, publisher={WILEY-VCH Verlag}, author={Genzo, Alexander and Sextro,
    Walter and Popp, Karl}, year={2005}, pages={91–92} }'
  chicago: 'Genzo, Alexander, Walter Sextro, and Karl Popp. “Analysis of the Forced
    Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” <i>PAMM</i>
    5, no. 1 (2005): 91–92. <a href="https://doi.org/10.1002/pamm.200510026">https://doi.org/10.1002/pamm.200510026</a>.'
  ieee: A. Genzo, W. Sextro, and K. Popp, “Analysis of the Forced Vibration of Two
    Bolted Half-Pipes with Extended Friction Contacts,” <i>PAMM</i>, vol. 5, no. 1,
    pp. 91–92, 2005.
  mla: Genzo, Alexander, et al. “Analysis of the Forced Vibration of Two Bolted Half-Pipes
    with Extended Friction Contacts.” <i>PAMM</i>, vol. 5, no. 1, WILEY-VCH Verlag,
    2005, pp. 91–92, doi:<a href="https://doi.org/10.1002/pamm.200510026">10.1002/pamm.200510026</a>.
  short: A. Genzo, W. Sextro, K. Popp, PAMM 5 (2005) 91–92.
date_created: 2019-04-18T07:34:48Z
date_updated: 2022-01-06T07:04:11Z
department:
- _id: '151'
doi: 10.1002/pamm.200510026
intvolume: '         5'
issue: '1'
language:
- iso: eng
page: 91-92
publication: PAMM
publication_identifier:
  issn:
  - 1617-7061
publisher: WILEY-VCH Verlag
status: public
title: Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction
  Contacts
type: journal_article
user_id: '55222'
volume: 5
year: '2005'
...
---
_id: '9526'
abstract:
- lang: eng
  text: The present paper deals with the forced vibration analysis of a test structure.
    The test structure consists of two parts, an upper and a lower half pipe, joint
    in two bolted flanges which represent the extended friction contacts. Depending
    on the clamping loads different normal pressure distributions can be established
    in the contact interfaces. Since the test structure is loaded with a harmonic
    external force relative displacements occur in the contact interface. This leads
    to microslip effects affecting the dynamic behaviour. The experimental validation
    of the calculation method accounting for these effects is shown by comparing measured
    and calculated frequency response functions (FRF). ({\^A}{\copyright} 2005 WILEY-VCH
    Verlag GmbH & Co. KGaA, Weinheim)
author:
- first_name: Alexander
  full_name: Genzo, Alexander
  last_name: Genzo
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Karl
  full_name: Popp, Karl
  last_name: Popp
citation:
  ama: Genzo A, Sextro W, Popp K. Analysis of the Forced Vibration of Two Bolted Half-Pipes
    with Extended Friction Contacts. <i>PAMM</i>. 2005;5(1):91-92. doi:<a href="https://doi.org/10.1002/pamm.200510026">10.1002/pamm.200510026</a>
  apa: Genzo, A., Sextro, W., &#38; Popp, K. (2005). Analysis of the Forced Vibration
    of Two Bolted Half-Pipes with Extended Friction Contacts. <i>PAMM</i>, <i>5</i>(1),
    91–92. <a href="https://doi.org/10.1002/pamm.200510026">https://doi.org/10.1002/pamm.200510026</a>
  bibtex: '@article{Genzo_Sextro_Popp_2005, title={Analysis of the Forced Vibration
    of Two Bolted Half-Pipes with Extended Friction Contacts}, volume={5}, DOI={<a
    href="https://doi.org/10.1002/pamm.200510026">10.1002/pamm.200510026</a>}, number={1},
    journal={PAMM}, publisher={WILEY-VCH Verlag}, author={Genzo, Alexander and Sextro,
    Walter and Popp, Karl}, year={2005}, pages={91–92} }'
  chicago: 'Genzo, Alexander, Walter Sextro, and Karl Popp. “Analysis of the Forced
    Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” <i>PAMM</i>
    5, no. 1 (2005): 91–92. <a href="https://doi.org/10.1002/pamm.200510026">https://doi.org/10.1002/pamm.200510026</a>.'
  ieee: A. Genzo, W. Sextro, and K. Popp, “Analysis of the Forced Vibration of Two
    Bolted Half-Pipes with Extended Friction Contacts,” <i>PAMM</i>, vol. 5, no. 1,
    pp. 91–92, 2005.
  mla: Genzo, Alexander, et al. “Analysis of the Forced Vibration of Two Bolted Half-Pipes
    with Extended Friction Contacts.” <i>PAMM</i>, vol. 5, no. 1, WILEY-VCH Verlag,
    2005, pp. 91–92, doi:<a href="https://doi.org/10.1002/pamm.200510026">10.1002/pamm.200510026</a>.
  short: A. Genzo, W. Sextro, K. Popp, PAMM 5 (2005) 91–92.
date_created: 2019-04-29T08:32:42Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1002/pamm.200510026
intvolume: '         5'
issue: '1'
language:
- iso: eng
page: 91-92
publication: PAMM
publication_identifier:
  issn:
  - 1617-7061
publisher: WILEY-VCH Verlag
status: public
title: Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction
  Contacts
type: journal_article
user_id: '55222'
volume: 5
year: '2005'
...