---
_id: '47535'
abstract:
- lang: eng
text: Consistent lightweight construction in the area of vehicle manufacturing requires
the increased use of multi-material combinations. This, in turn, requires an adaptation
of standard joining techniques. In multi-material combinations, the importance
of integral cast components, in particular, is increasing and poses additional
technical challenges for the industry. One approach to solve these challenges
is adaptable joining elements manufactured by a thermomechanical forming process.
By applying an incremental and thermomechanical joining process, it is possible
to react immediately and adapt the joining process inline to reduce the number
of different joining elements. In the investigation described in this publication,
cast plates made of the cast aluminium alloy EN AC-AlSi9 serve as joining partners,
which are processed by sand casting. The joining process of hypoeutectic AlSi
alloys is challenging as their brittle character leads to cracks in the joint
during conventional mechanical joining. To solve this, the frictional heat of
the novel joining process applied can provide a finer microstructure in the hypoeutectic
AlSi9 cast alloy. In detail, its Si is finer-grained, resulting in higher ductility
of the joint. This study reveals the thermomechanical joining suitability of a
hypoeutectic cast aluminium alloy in combination with adaptively manufactured
auxiliary joining elements.
article_number: '169'
article_type: original
author:
- first_name: Thomas
full_name: Borgert, Thomas
id: '83141'
last_name: Borgert
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining
of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials
Processing. 2023;7(5). doi:10.3390/jmmp7050169
apa: Borgert, T., Neuser, M., Hoyer, K.-P., Homberg, W., & Schaper, M. (2023).
Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of
Manufacturing and Materials Processing, 7(5), Article 169. https://doi.org/10.3390/jmmp7050169
bibtex: '@article{Borgert_Neuser_Hoyer_Homberg_Schaper_2023, title={Thermomechanical
Joining of Hypoeutectic Aluminium Cast Plates}, volume={7}, DOI={10.3390/jmmp7050169},
number={5169}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI
AG}, author={Borgert, Thomas and Neuser, Moritz and Hoyer, Kay-Peter and Homberg,
Werner and Schaper, Mirko}, year={2023} }'
chicago: Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko
Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal
of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.
ieee: 'T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical
Joining of Hypoeutectic Aluminium Cast Plates,” Journal of Manufacturing and
Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi: 10.3390/jmmp7050169.'
mla: Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium
Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7,
no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.
short: T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, M. Schaper, Journal of Manufacturing
and Materials Processing 7 (2023).
date_created: 2023-10-02T06:46:53Z
date_updated: 2026-05-12T12:00:54Z
department:
- _id: '156'
- _id: '158'
doi: 10.3390/jmmp7050169
intvolume: ' 7'
issue: '5'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
project:
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '133'
name: TRR 285 - Project Area C
- _id: '131'
name: TRR 285 - Project Area A
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Journal of Manufacturing and Materials Processing
publication_identifier:
issn:
- 2504-4494
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates
type: journal_article
user_id: '7850'
volume: 7
year: '2023'
...
---
_id: '43031'
abstract:
- lang: eng
text: Requirements of multi-material construction involve adjustments to standard
joining techniques. Especially the growing importance of integral cast components
poses additional engineering challenges for the industry. One approach to achieve
these goals are adaptable joining elements formed by friction spinning. This approach
uses friction-induced heat to form customisable joining elements to join sheets
for different boundary conditions, even for brittle cast materials. It is possible
to react immediately to adapt to the joining process inline and reduce the amount
of different joining elements. As the joining partner serve casting plates of
the aluminium casting alloy EN AC–AlSi9, which is processed in the sand casting.
Joining hypoeutectic AlSi alloys constitutes a challenge because the brittle character
of these cause cracks in the joint during conventional mechanical joining. Furthermore,
the friction-induced heat of the novel joining process causes a finer microstructure
in the hypoeutectic AlSi9 casting alloy. In particular, the eutectic Si is more
fine-grained, resulting in higher joint ductility. This study indicates the joining
suitability of a hypoeutectic aluminium casting alloy in combination with adaptive
manufactured additional joining elements. Here, various mechanical and microstructural
investigations validate the influence of the thermomechanical joining technique.
In conclusion, the potential of this joining process is presented regarding the
joinability of cast aluminium components.
author:
- first_name: Thomas
full_name: Borgert, Thomas
id: '83141'
last_name: Borgert
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Eugen
full_name: Wiens, Eugen
id: '7888'
last_name: Wiens
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Borgert T, Neuser M, Wiens E, Grydin O, Homberg W, Schaper M. Influence of
thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium
cast alloy. In: Materials Research Proceedings. Vol 25. Materials Research
Forum LLC; 2023:187-194. doi:10.21741/9781644902417-24'
apa: Borgert, T., Neuser, M., Wiens, E., Grydin, O., Homberg, W., & Schaper,
M. (2023). Influence of thermo-mechanical joining process on the microstructure
of a hypoeutectic aluminium cast alloy. Materials Research Proceedings,
25, 187–194. https://doi.org/10.21741/9781644902417-24
bibtex: '@inproceedings{Borgert_Neuser_Wiens_Grydin_Homberg_Schaper_2023, title={Influence
of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium
cast alloy}, volume={25}, DOI={10.21741/9781644902417-24},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Borgert, Thomas and Neuser, Moritz and Wiens, Eugen and Grydin,
Olexandr and Homberg, Werner and Schaper, Mirko}, year={2023}, pages={187–194}
}'
chicago: Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg,
and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure
of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings,
25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.
ieee: 'T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence
of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium
cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25,
pp. 187–194, doi: 10.21741/9781644902417-24.'
mla: Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on
the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” Materials Research
Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.
short: 'T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, M. Schaper, in:
Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 187–194.'
conference:
end_date: 05.04.2023
location: Nürnberg
name: 20th International Conference on Sheet Metal
start_date: 02.04.2023
date_created: 2023-03-16T14:59:01Z
date_updated: 2026-05-12T13:53:46Z
department:
- _id: '156'
- _id: '158'
doi: 10.21741/9781644902417-24
intvolume: ' 25'
language:
- iso: eng
page: 187-194
project:
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '133'
name: TRR 285 - Project Area C
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '131'
name: TRR 285 - Project Area A
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic
aluminium cast alloy
type: conference
user_id: '7850'
volume: 25
year: '2023'
...
---
_id: '34001'
author:
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
citation:
ama: 'Arian B, Homberg W, Kersting L, Trächtler A, Rozo Vasquez J. Produktkennzeichnung
durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen
von metastabilen Stahlwerkstoffen. In: 36. Aachener Stahlkolloquium – Umformtechnik
“Ideen Form Geben“. ; 2022:333-347.'
apa: Arian, B., Homberg, W., Kersting, L., Trächtler, A., & Rozo Vasquez, J.
(2022). Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen
Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen. 36. Aachener
Stahlkolloquium – Umformtechnik “Ideen Form Geben“, 333–347.
bibtex: '@inproceedings{Arian_Homberg_Kersting_Trächtler_Rozo Vasquez_2022, place={Aachen},
title={Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen
Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen}, booktitle={36.
Aachener Stahlkolloquium – Umformtechnik “Ideen Form geben“}, author={Arian, Bahman
and Homberg, Werner and Kersting, Lukas and Trächtler, Ansgar and Rozo Vasquez,
Julian}, year={2022}, pages={333–347} }'
chicago: Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, and Julian
Rozo Vasquez. “Produktkennzeichnung Durch Lokal Definierte Einstellung von Ferromagnetischen
Eigenschaften Beim Drückwalzen von Metastabilen Stahlwerkstoffen.” In 36. Aachener
Stahlkolloquium – Umformtechnik “Ideen Form Geben“, 333–47. Aachen, 2022.
ieee: B. Arian, W. Homberg, L. Kersting, A. Trächtler, and J. Rozo Vasquez, “Produktkennzeichnung
durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen
von metastabilen Stahlwerkstoffen,” in 36. Aachener Stahlkolloquium – Umformtechnik
“Ideen Form geben“, 2022, pp. 333–347.
mla: Arian, Bahman, et al. “Produktkennzeichnung Durch Lokal Definierte Einstellung
von Ferromagnetischen Eigenschaften Beim Drückwalzen von Metastabilen Stahlwerkstoffen.”
36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, 2022,
pp. 333–47.
short: 'B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, in: 36.
Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, Aachen, 2022, pp.
333–347.'
date_created: 2022-11-04T08:35:03Z
date_updated: 2023-12-15T09:38:08Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 333-347
place: Aachen
publication: 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form geben“
publication_identifier:
isbn:
- 978-3-95886-460-3
quality_controlled: '1'
status: public
title: Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen
Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen
type: conference
user_id: '36287'
year: '2022'
...
---
_id: '34003'
author:
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Annika
full_name: Oesterwinter, Annika
id: '44917'
last_name: Oesterwinter
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Arian B, Oesterwinter A, Homberg W, et al. A flow forming process model to
predict workpiece properties in AISI 304L. In: 19th Int. Conference on Metal
Forming 2022. ; 2022.'
apa: Arian, B., Oesterwinter, A., Homberg, W., Rozo Vasquez, J., Walther, F., Kersting,
L., & Trächtler, A. (2022). A flow forming process model to predict workpiece
properties in AISI 304L. 19th Int. Conference on Metal Forming 2022.
bibtex: '@inproceedings{Arian_Oesterwinter_Homberg_Rozo Vasquez_Walther_Kersting_Trächtler_2022,
title={A flow forming process model to predict workpiece properties in AISI 304L},
booktitle={19th Int. Conference on Metal Forming 2022}, author={Arian, Bahman
and Oesterwinter, Annika and Homberg, Werner and Rozo Vasquez, Julian and Walther,
Frank and Kersting, Lukas and Trächtler, Ansgar}, year={2022} }'
chicago: Arian, Bahman, Annika Oesterwinter, Werner Homberg, Julian Rozo Vasquez,
Frank Walther, Lukas Kersting, and Ansgar Trächtler. “A Flow Forming Process Model
to Predict Workpiece Properties in AISI 304L.” In 19th Int. Conference on Metal
Forming 2022, 2022.
ieee: B. Arian et al., “A flow forming process model to predict workpiece
properties in AISI 304L,” 2022.
mla: Arian, Bahman, et al. “A Flow Forming Process Model to Predict Workpiece Properties
in AISI 304L.” 19th Int. Conference on Metal Forming 2022, 2022.
short: 'B. Arian, A. Oesterwinter, W. Homberg, J. Rozo Vasquez, F. Walther, L. Kersting,
A. Trächtler, in: 19th Int. Conference on Metal Forming 2022, 2022.'
date_created: 2022-11-04T09:02:27Z
date_updated: 2023-12-15T09:38:57Z
department:
- _id: '153'
- _id: '241'
- _id: '156'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: 19th Int. Conference on Metal Forming 2022
quality_controlled: '1'
status: public
title: A flow forming process model to predict workpiece properties in AISI 304L
type: conference
user_id: '36287'
year: '2022'
...
---
_id: '34216'
abstract:
- lang: eng
text: Mechanical joining technologies are increasingly used in multi-material lightweight
constructions and offer opportunities to create versatile joining processes due
to their low heat input, robustness to metallurgical incompatibilities and various
process variants. They can be categorised into technologies which require an auxiliary
joining element, or do not require an auxiliary joining element. A typical example
for a mechanical joining process with auxiliary joining element is self-piercing
riveting. A wide range of processes exist which are not requiring an auxiliary
joining element. This allows both point-shaped (e.g., by clinching) and line-shaped
(e.g., friction stir welding) joints to be produced. In order to achieve versatile
processes, challenges exist in particular in the creation of intervention possibilities
in the process and the understanding and handling of materials that are difficult
to join, such as fiber reinforced plastics (FRP) or high-strength metals. In addition,
predictive capability is required, which in particular requires accurate process
simulation. Finally, the processes must be measured non-destructively in order
to generate control variables in the process or to investigate the cause-effect
relationship. This paper covers the state of the art in scientific research concerning
mechanical joining and discusses future challenges on the way to versatile mechanical
joining processes.
article_number: '100113'
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: M.
full_name: Merklein, M.
last_name: Merklein
- first_name: A.
full_name: Brosius, A.
last_name: Brosius
- first_name: D.
full_name: Drummer, D.
last_name: Drummer
- first_name: L.
full_name: Fratini, L.
last_name: Fratini
- first_name: U.
full_name: Füssel, U.
last_name: Füssel
- first_name: M.
full_name: Gude, M.
last_name: Gude
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: P.A.F.
full_name: Martins, P.A.F.
last_name: Martins
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: M.
full_name: Lechner, M.
last_name: Lechner
- first_name: R.
full_name: Kupfer, R.
last_name: Kupfer
- first_name: B.
full_name: Gröger, B.
last_name: Gröger
- first_name: Daxin
full_name: Han, Daxin
id: '36544'
last_name: Han
- first_name: J.
full_name: Kalich, J.
last_name: Kalich
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: T.
full_name: Kleffel, T.
last_name: Kleffel
- first_name: D.
full_name: Köhler, D.
last_name: Köhler
- first_name: C.-M.
full_name: Kuball, C.-M.
last_name: Kuball
- first_name: J.
full_name: Popp, J.
last_name: Popp
- first_name: D.
full_name: Römisch, D.
last_name: Römisch
- first_name: J.
full_name: Troschitz, J.
last_name: Troschitz
- first_name: Christian
full_name: Wischer, Christian
id: '72219'
last_name: Wischer
- first_name: S.
full_name: Wituschek, S.
last_name: Wituschek
- first_name: M.
full_name: Wolf, M.
last_name: Wolf
citation:
ama: Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic
deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113
apa: Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U.,
Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R.,
Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M.,
… Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal
of Advanced Joining Processes, 5, Article 100113. https://doi.org/10.1016/j.jajp.2022.100113
bibtex: '@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et
al._2022, title={Review on mechanical joining by plastic deformation}, volume={5},
DOI={10.1016/j.jajp.2022.100113},
number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Meschut, Gerson and Merklein, M. and Brosius, A. and Drummer, D.
and Fratini, L. and Füssel, U. and Gude, M. and Homberg, Werner and Martins, P.A.F.
and Bobbert, Mathias and et al.}, year={2022} }'
chicago: Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel,
M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal
of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113.
ieee: 'G. Meschut et al., “Review on mechanical joining by plastic deformation,”
Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:
10.1016/j.jajp.2022.100113.'
mla: Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”
Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022,
doi:10.1016/j.jajp.2022.100113.
short: G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M.
Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger,
D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D.
Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced
Joining Processes 5 (2022).
date_created: 2022-12-05T21:24:49Z
date_updated: 2023-04-27T08:52:38Z
department:
- _id: '157'
- _id: '156'
- _id: '9'
doi: 10.1016/j.jajp.2022.100113
intvolume: ' 5'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '138'
name: 'TRR 285 – A04: TRR 285 - Subproject A04'
- _id: '137'
name: 'TRR 285 – A03: TRR 285 - Subproject A03'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '145'
name: 'TRR 285 – C01: TRR 285 - Subproject C01'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Review on mechanical joining by plastic deformation
type: journal_article
user_id: '66459'
volume: 5
year: '2022'
...
---
_id: '32412'
abstract:
- lang: eng
text: Friction-spinning as an innovative incremental forming process enables
large degrees of deformation in the field of tube and sheet metal forming due
to a self-induced heat generation in the forming zone. This paper presents a new
tool and process design with a driven tool for the targeted adjustment of residual
stress distributions in the friction-spinning process. Locally adapted residual
stress depth distributions are intended to improve the functionality of the friction-spinning
workpieces, e.g. by delaying failure or triggering it in a defined way. The new
process designs with the driven tool and a subsequent flow-forming operation are
investigated regarding the influence on the residual stress depth distributions
compared to those of standard friction-spinning process. Residual stress depth
distributions are measured with the incremental hole-drilling method. The workpieces
(tubular part with a flange) are manufactured using heat-treatable 3.3206 (EN-AW
6060 T6) tubular profiles. It is shown that the residual stress depth distributions
change significantly due to the new process designs, which offers new potentials
for the targeted adjustment of residual stresses that serve to improve the workpiece
properties.
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Manufacture of Defined Residual Stress Distributions in
the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming. Key
Engineering Materials. 2022;926:683-689. doi:10.4028/p-3rk19y'
apa: 'Dahms, F., & Homberg, W. (2022). Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.
Key Engineering Materials, 926, 683–689. https://doi.org/10.4028/p-3rk19y'
bibtex: '@article{Dahms_Homberg_2022, title={Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming},
volume={926}, DOI={10.4028/p-3rk19y},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Dahms, Frederik and Homberg, Werner}, year={2022}, pages={683–689} }'
chicago: 'Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual
Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent
Flow-Forming.” Key Engineering Materials 926 (2022): 683–89. https://doi.org/10.4028/p-3rk19y.'
ieee: 'F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions
in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming,” Key
Engineering Materials, vol. 926, pp. 683–689, 2022, doi: 10.4028/p-3rk19y.'
mla: 'Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”
Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022,
pp. 683–89, doi:10.4028/p-3rk19y.'
short: F. Dahms, W. Homberg, Key Engineering Materials 926 (2022) 683–689.
conference:
end_date: 29 April 2022
location: Braga, Portugal
name: 25th International Conference on Material Forming (ESAFORM 2022)
start_date: 27 April 2022
date_created: 2022-07-25T08:32:43Z
date_updated: 2023-04-27T10:30:38Z
department:
- _id: '156'
doi: 10.4028/p-3rk19y
intvolume: ' 926'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 683-689
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: 'Manufacture of Defined Residual Stress Distributions in the Friction-Spinning
Process: Driven Tool and Subsequent Flow-Forming'
type: journal_article
user_id: '64977'
volume: 926
year: '2022'
...
---
_id: '29357'
abstract:
- lang: eng
text: Friction-spinning as an innovative incremental forming process enables
high degrees of deformation in the field of tube and sheet metal forming due to
self-induced heat generation in the forming area. The complex thermomechanical
conditions generate non-uniform residual stress distributions. In order to specifically
adjust these residual stress distributions, the influence of different process
parameters on residual stress distributions in flanges formed by the friction-spinning
of tubes is investigated using the design of experiments (DoE) method. The feed
rate with an effect of −156 MPa/mm is the dominating control parameter for residual
stress depth distribution in steel flange forming, whereas the rotation speed
of the workpiece with an effect of 18 MPa/mm dominates the gradient of residual
stress generation in the aluminium flange-forming process. A run-to-run predictive
control system for the specific adjustment of residual stress distributions is
proposed and validated. The predictive model provides an initial solution in the
form of a parameter set, and the controlled feedback iteratively approaches the
target value with new parameter sets recalculated on the basis of the deviation
of the previous run. Residual stress measurements are carried out using the hole-drilling
method and X-ray diffraction by the cosα-method.
article_number: '158'
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Manufacture of Defined Residual Stress Distributions in
the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.
Metals. 2022;12(1). doi:10.3390/met12010158'
apa: 'Dahms, F., & Homberg, W. (2022). Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Investigations and Run-to-Run
Predictive Control. Metals, 12(1), Article 158. https://doi.org/10.3390/met12010158'
bibtex: '@article{Dahms_Homberg_2022, title={Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Investigations and Run-to-Run
Predictive Control}, volume={12}, DOI={10.3390/met12010158},
number={1158}, journal={Metals}, publisher={MDPI AG}, author={Dahms, Frederik
and Homberg, Werner}, year={2022} }'
chicago: 'Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual
Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run
Predictive Control.” Metals 12, no. 1 (2022). https://doi.org/10.3390/met12010158.'
ieee: 'F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions
in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control,”
Metals, vol. 12, no. 1, Art. no. 158, 2022, doi: 10.3390/met12010158.'
mla: 'Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Investigations and Run-to-Run
Predictive Control.” Metals, vol. 12, no. 1, 158, MDPI AG, 2022, doi:10.3390/met12010158.'
short: F. Dahms, W. Homberg, Metals 12 (2022).
date_created: 2022-01-17T08:21:04Z
date_updated: 2023-04-27T10:30:32Z
department:
- _id: '156'
doi: 10.3390/met12010158
intvolume: ' 12'
issue: '1'
keyword:
- General Materials Science
- Metals and Alloys
language:
- iso: eng
publication: Metals
publication_identifier:
issn:
- 2075-4701
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: 'Manufacture of Defined Residual Stress Distributions in the Friction-Spinning
Process: Investigations and Run-to-Run Predictive Control'
type: journal_article
user_id: '64977'
volume: 12
year: '2022'
...
---
_id: '34000'
abstract:
- lang: eng
text: "Abstract\r\n This paper presents
the characterization of the microstructure evolution during flow forming of austenitic
stainless steel AISI 304L. Due to plastic deformation of metastable austenitic
steel, phase transformation from γ-austenite into α’-martensite occurs. This is
initiated by the formation of shear bands as product of the external stresses.
By means of coupled microscopic and micromagnetic investigations, a characterization
of the microstructure was carried out. In particular, this study shows the distribution
of the strain-induced α’-martensite and its influence on material properties like
hardness at different depths. The microstructural analyses by means of electron
backscattered diffraction (EBSD) technique, evidence a higher amount of α’-martensite
(ca. 23 %) close to the outer specimen surface, where the plastic deformation
and the direct contact with the forming tool take place. In the middle area (ca.
1.5 mm depth from the outer surface), the portion of transformed α’-martensite
drops to 7 % and in the inner surface to 2 %. These results are well correlated
with microhardness and micromagnetic measurements at different depths. EBSD and
atomic force microscopy (AFM) were used to make a detailed characterization of
the topography and degree of deformation of the shear bands. Likewise, the mechanisms
of nucleation of α’-martensite were discussed. This research contributes to the
development of micromagnetic sensors to monitor the evolution of properties during
flow forming. This makes them more suitable for closed-loop property control,
which offers possibilities for an application-oriented and more efficient production."
author:
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Hanigah
full_name: Kanagarajah, Hanigah
last_name: Kanagarajah
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Rozo Vasquez J, Kanagarajah H, Arian B, et al. Coupled microscopic and micromagnetic
depth-specific analysis of plastic deformation and phase transformation of metastable
austenitic steel AISI 304L by flow forming. Practical Metallography. 2022;59(11):660-675.
doi:10.1515/pm-2022-0064
apa: Rozo Vasquez, J., Kanagarajah, H., Arian, B., Kersting, L., Homberg, W., Trächtler,
A., & Walther, F. (2022). Coupled microscopic and micromagnetic depth-specific
analysis of plastic deformation and phase transformation of metastable austenitic
steel AISI 304L by flow forming. Practical Metallography, 59(11),
660–675. https://doi.org/10.1515/pm-2022-0064
bibtex: '@article{Rozo Vasquez_Kanagarajah_Arian_Kersting_Homberg_Trächtler_Walther_2022,
title={Coupled microscopic and micromagnetic depth-specific analysis of plastic
deformation and phase transformation of metastable austenitic steel AISI 304L
by flow forming}, volume={59}, DOI={10.1515/pm-2022-0064},
number={11}, journal={Practical Metallography}, publisher={Walter de Gruyter GmbH},
author={Rozo Vasquez, Julian and Kanagarajah, Hanigah and Arian, Bahman and Kersting,
Lukas and Homberg, Werner and Trächtler, Ansgar and Walther, Frank}, year={2022},
pages={660–675} }'
chicago: 'Rozo Vasquez, Julian, Hanigah Kanagarajah, Bahman Arian, Lukas Kersting,
Werner Homberg, Ansgar Trächtler, and Frank Walther. “Coupled Microscopic and
Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation
of Metastable Austenitic Steel AISI 304L by Flow Forming.” Practical Metallography
59, no. 11 (2022): 660–75. https://doi.org/10.1515/pm-2022-0064.'
ieee: 'J. Rozo Vasquez et al., “Coupled microscopic and micromagnetic depth-specific
analysis of plastic deformation and phase transformation of metastable austenitic
steel AISI 304L by flow forming,” Practical Metallography, vol. 59, no.
11, pp. 660–675, 2022, doi: 10.1515/pm-2022-0064.'
mla: Rozo Vasquez, Julian, et al. “Coupled Microscopic and Micromagnetic Depth-Specific
Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic
Steel AISI 304L by Flow Forming.” Practical Metallography, vol. 59, no.
11, Walter de Gruyter GmbH, 2022, pp. 660–75, doi:10.1515/pm-2022-0064.
short: J. Rozo Vasquez, H. Kanagarajah, B. Arian, L. Kersting, W. Homberg, A. Trächtler,
F. Walther, Practical Metallography 59 (2022) 660–675.
date_created: 2022-11-04T08:29:21Z
date_updated: 2023-05-02T08:19:27Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
doi: 10.1515/pm-2022-0064
intvolume: ' 59'
issue: '11'
keyword:
- Metals and Alloys
- Mechanics of Materials
- Condensed Matter Physics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
page: 660-675
publication: Practical Metallography
publication_identifier:
issn:
- 2195-8599
- 0032-678X
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation
and phase transformation of metastable austenitic steel AISI 304L by flow forming
type: journal_article
user_id: '36287'
volume: 59
year: '2022'
...
---
_id: '33999'
abstract:
- lang: eng
text: The production of complex multi-functional, high-strength parts is
becoming increasingly important in the industry. Especially with small batch size,
the incremental flow forming processes can be advantageous. The production of
parts with complex geometry and locally graded material properties currently depicts
a great challenge in the flow forming process. At this point, the usage of closed-loop
control for the shape and properties could be a feasible new solution. The overall
aim in this project is to establish an intelligent closed-loop control system
for the wall thickness as well as the α’-martensite content of AISI 304L-workpieces
in a flow forming process. To reach this goal, a novel sensor concept for online
measurements of the wall thickness reduction and the martensite content during
forming process is proposed. It includes the setup of a modified flow forming
machine and the integration of the sensor system in the machine control. Additionally,
a simulation model for the flow forming process is presented which describes the
forming process with regard to the plastic workpiece deformation, the induced
α’-martensite fraction, and the sensor behavior. This model was used for designing
a closed-loop process control of the wall thickness reduction that was subsequently
realized at the real plant including online measured feedback from the sensor
system.
author:
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Julian Rozo
full_name: Vasquez, Julian Rozo
last_name: Vasquez
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Kersting L, Arian B, Vasquez JR, Trächtler A, Homberg W, Walther F. Innovative
Online Measurement and Modelling Approach for Property-Controlled Flow Forming
Processes. Key Engineering Materials. 2022;926:862-874. doi:10.4028/p-yp2hj3
apa: Kersting, L., Arian, B., Vasquez, J. R., Trächtler, A., Homberg, W., &
Walther, F. (2022). Innovative Online Measurement and Modelling Approach for Property-Controlled
Flow Forming Processes. Key Engineering Materials, 926, 862–874.
https://doi.org/10.4028/p-yp2hj3
bibtex: '@article{Kersting_Arian_Vasquez_Trächtler_Homberg_Walther_2022, title={Innovative
Online Measurement and Modelling Approach for Property-Controlled Flow Forming
Processes}, volume={926}, DOI={10.4028/p-yp2hj3},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Kersting, Lukas and Arian, Bahman and Vasquez, Julian Rozo and Trächtler,
Ansgar and Homberg, Werner and Walther, Frank}, year={2022}, pages={862–874} }'
chicago: 'Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler,
Werner Homberg, and Frank Walther. “Innovative Online Measurement and Modelling
Approach for Property-Controlled Flow Forming Processes.” Key Engineering Materials
926 (2022): 862–74. https://doi.org/10.4028/p-yp2hj3.'
ieee: 'L. Kersting, B. Arian, J. R. Vasquez, A. Trächtler, W. Homberg, and F. Walther,
“Innovative Online Measurement and Modelling Approach for Property-Controlled
Flow Forming Processes,” Key Engineering Materials, vol. 926, pp. 862–874,
2022, doi: 10.4028/p-yp2hj3.'
mla: Kersting, Lukas, et al. “Innovative Online Measurement and Modelling Approach
for Property-Controlled Flow Forming Processes.” Key Engineering Materials,
vol. 926, Trans Tech Publications, Ltd., 2022, pp. 862–74, doi:10.4028/p-yp2hj3.
short: L. Kersting, B. Arian, J.R. Vasquez, A. Trächtler, W. Homberg, F. Walther,
Key Engineering Materials 926 (2022) 862–874.
date_created: 2022-11-04T08:27:33Z
date_updated: 2023-05-02T08:19:13Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
doi: 10.4028/p-yp2hj3
intvolume: ' 926'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 862-874
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: Innovative Online Measurement and Modelling Approach for Property-Controlled
Flow Forming Processes
type: journal_article
user_id: '36287'
volume: 926
year: '2022'
...
---
_id: '36563'
author:
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
citation:
ama: 'Rozo Vasquez J, Walther F, Arian B, Homberg W, Kersting L, Trächtler A. Soft
sensor concept for micromagnetic depth-specific analysis of phase transformation
during flow forming of AISI 304L steel. In: Proceedings of the 14th International
Conference on Barkhausen Noise and Micromagnetic Testing. ; 2022.'
apa: Rozo Vasquez, J., Walther, F., Arian, B., Homberg, W., Kersting, L., &
Trächtler, A. (2022). Soft sensor concept for micromagnetic depth-specific analysis
of phase transformation during flow forming of AISI 304L steel. Proceedings
of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing.
ICBM 14, 14th International Conference on Barkhausen Noise and Micromagnetic Testing,
Stockholm.
bibtex: '@inproceedings{Rozo Vasquez_Walther_Arian_Homberg_Kersting_Trächtler_2022,
title={Soft sensor concept for micromagnetic depth-specific analysis of phase
transformation during flow forming of AISI 304L steel.}, booktitle={Proceedings
of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing},
author={Rozo Vasquez, Julian and Walther, Frank and Arian, Bahman and Homberg,
Werner and Kersting, Lukas and Trächtler, Ansgar}, year={2022} }'
chicago: Rozo Vasquez, Julian, Frank Walther, Bahman Arian, Werner Homberg, Lukas
Kersting, and Ansgar Trächtler. “Soft Sensor Concept for Micromagnetic Depth-Specific
Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” In Proceedings
of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing,
2022.
ieee: J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, and A. Trächtler,
“Soft sensor concept for micromagnetic depth-specific analysis of phase transformation
during flow forming of AISI 304L steel.,” presented at the ICBM 14, 14th International
Conference on Barkhausen Noise and Micromagnetic Testing, Stockholm, 2022.
mla: Rozo Vasquez, Julian, et al. “Soft Sensor Concept for Micromagnetic Depth-Specific
Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” Proceedings
of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing,
2022.
short: 'J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, A. Trächtler,
in: Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic
Testing, 2022.'
conference:
end_date: 2022-09-30
location: Stockholm
name: ICBM 14, 14th International Conference on Barkhausen Noise and Micromagnetic
Testing
start_date: 2022-09-27
date_created: 2023-01-13T10:10:03Z
date_updated: 2023-05-02T08:20:04Z
department:
- _id: '156'
- _id: '241'
language:
- iso: eng
publication: Proceedings of the 14th International Conference on Barkhausen Noise
and Micromagnetic Testing
quality_controlled: '1'
status: public
title: Soft sensor concept for micromagnetic depth-specific analysis of phase transformation
during flow forming of AISI 304L steel.
type: conference
user_id: '36287'
year: '2022'
...
---
_id: '36412'
author:
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Kersting L, Trächtler A, Arian B, Homberg W, Rozo Vasquez J, Walther F. Echtzeitfähige
Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte
Herstellung Gradierter Bauteile. Diedrich; 2022.
apa: Kersting, L., Trächtler, A., Arian, B., Homberg, W., Rozo Vasquez, J., &
Walther, F. (2022). Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses
für die eigenschaftsgeregelte Herstellung gradierter Bauteile. Diedrich.
bibtex: '@book{Kersting_Trächtler_Arian_Homberg_Rozo Vasquez_Walther_2022, place={Magdeburg},
title={Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die
eigenschaftsgeregelte Herstellung gradierter Bauteile.}, publisher={Diedrich},
author={Kersting, Lukas and Trächtler, Ansgar and Arian, Bahman and Homberg, Werner
and Rozo Vasquez, Julian and Walther, Frank}, year={2022} }'
chicago: 'Kersting, Lukas, Ansgar Trächtler, Bahman Arian, Werner Homberg, Julian
Rozo Vasquez, and Frank Walther. Echtzeitfähige Modellierung Eines Innovativen
Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile.
Magdeburg: Diedrich, 2022.'
ieee: 'L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, and F.
Walther, Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für
die eigenschaftsgeregelte Herstellung gradierter Bauteile. Magdeburg: Diedrich,
2022.'
mla: Kersting, Lukas, et al. Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses
Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile. Diedrich, 2022.
short: L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, F. Walther,
Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte
Herstellung Gradierter Bauteile., Diedrich, Magdeburg, 2022.
date_created: 2023-01-12T11:44:49Z
date_updated: 2023-05-02T08:20:36Z
department:
- _id: '241'
- _id: '156'
language:
- iso: eng
place: Magdeburg
publication_identifier:
isbn:
- '978-3-948749-23-1 '
publisher: Diedrich
quality_controlled: '1'
status: public
title: Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Herstellung gradierter Bauteile.
type: book
user_id: '36287'
year: '2022'
...
---
_id: '23469'
abstract:
- lang: eng
text: The implementation of control systems in metal forming processes improves
product quality and productivity. By controlling workpiece properties during the
process, beneficial effects caused by forming can be exploited and integrated
in the product design. The overall goal of this investigation is to produce tailored
tubular parts with a defined locally graded microstructure by means of reverse
flow forming. For this purpose, the proposed system aims to control both the desired
geometry of the workpiece and additionally the formation of strain-induced α′-martensite
content in the metastable austenitic stainless steel AISI 304 L. The paper introduces
an overall control scheme, a geometry model for describing the process and changes
in the dimensions of the workpiece, as well as a material model for the process-induced
formation of martensite, providing equations based on empirical data. Moreover,
measurement systems providing a closed feedback loop are presented, including
a novel softsensor for in-situ measurements of the martensite content.
article_number: '100057'
author:
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Julian Rozo
full_name: Vasquez, Julian Rozo
last_name: Vasquez
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Riepold M, Arian B, Vasquez JR, Homberg W, Walther F, Trächtler A. Model approaches
for closed-loop property control for flow forming. Advances in Industrial and
Manufacturing Engineering. Published online 2021. doi:10.1016/j.aime.2021.100057
apa: Riepold, M., Arian, B., Vasquez, J. R., Homberg, W., Walther, F., & Trächtler,
A. (2021). Model approaches for closed-loop property control for flow forming.
Advances in Industrial and Manufacturing Engineering, Article 100057. https://doi.org/10.1016/j.aime.2021.100057
bibtex: '@article{Riepold_Arian_Vasquez_Homberg_Walther_Trächtler_2021, title={Model
approaches for closed-loop property control for flow forming}, DOI={10.1016/j.aime.2021.100057},
number={100057}, journal={Advances in Industrial and Manufacturing Engineering},
author={Riepold, Markus and Arian, Bahman and Vasquez, Julian Rozo and Homberg,
Werner and Walther, Frank and Trächtler, Ansgar}, year={2021} }'
chicago: Riepold, Markus, Bahman Arian, Julian Rozo Vasquez, Werner Homberg, Frank
Walther, and Ansgar Trächtler. “Model Approaches for Closed-Loop Property Control
for Flow Forming.” Advances in Industrial and Manufacturing Engineering,
2021. https://doi.org/10.1016/j.aime.2021.100057.
ieee: 'M. Riepold, B. Arian, J. R. Vasquez, W. Homberg, F. Walther, and A. Trächtler,
“Model approaches for closed-loop property control for flow forming,” Advances
in Industrial and Manufacturing Engineering, Art. no. 100057, 2021, doi: 10.1016/j.aime.2021.100057.'
mla: Riepold, Markus, et al. “Model Approaches for Closed-Loop Property Control
for Flow Forming.” Advances in Industrial and Manufacturing Engineering,
100057, 2021, doi:10.1016/j.aime.2021.100057.
short: M. Riepold, B. Arian, J.R. Vasquez, W. Homberg, F. Walther, A. Trächtler,
Advances in Industrial and Manufacturing Engineering (2021).
date_created: 2021-08-23T13:23:05Z
date_updated: 2023-12-15T09:39:21Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
doi: 10.1016/j.aime.2021.100057
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: Advances in Industrial and Manufacturing Engineering
publication_identifier:
issn:
- 2666-9129
publication_status: published
quality_controlled: '1'
status: public
title: Model approaches for closed-loop property control for flow forming
type: journal_article
user_id: '36287'
year: '2021'
...
---
_id: '21477'
author:
- first_name: Tim
full_name: Rostek, Tim
id: '3469'
last_name: Rostek
- first_name: Hanna
full_name: Makeieva, Hanna
last_name: Makeieva
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Rostek T, Makeieva H, Homberg W. Cutting Blades for Food Processing Applications
Manufactured Using Innovative Spin Forming. In: Daehn G, Cao J, Kinsey B, Tekkaya
AE, Vivek A, Yoshida Y, eds. Proceedings of the 13th International Conference
on the Technology of Plasticity. Forming the Future. The Minerals, Metals
& Materials Series. Springer, Cham; 2021:2115-2125. doi:10.1007/978-3-030-75381-8_178'
apa: Rostek, T., Makeieva, H., & Homberg, W. (2021). Cutting Blades for Food
Processing Applications Manufactured Using Innovative Spin Forming. In G. Daehn,
J. Cao, B. Kinsey, A. E. Tekkaya, A. Vivek, & Y. Yoshida (Eds.), Proceedings
of the 13th International Conference on the Technology of Plasticity (pp.
2115–2125). Springer, Cham. https://doi.org/10.1007/978-3-030-75381-8_178
bibtex: '@inproceedings{Rostek_Makeieva_Homberg_2021, place={Columbus}, series={Forming
the Future. The Minerals, Metals & Materials Series.}, title={Cutting Blades
for Food Processing Applications Manufactured Using Innovative Spin Forming},
DOI={10.1007/978-3-030-75381-8_178},
booktitle={Proceedings of the 13th International Conference on the Technology
of Plasticity}, publisher={Springer, Cham}, author={Rostek, Tim and Makeieva,
Hanna and Homberg, Werner}, editor={Daehn, G. and Cao, J. and Kinsey, B. and Tekkaya,
A. E. and Vivek, A. and Yoshida, Y}, year={2021}, pages={2115–2125}, collection={Forming
the Future. The Minerals, Metals & Materials Series.} }'
chicago: 'Rostek, Tim, Hanna Makeieva, and Werner Homberg. “Cutting Blades for Food
Processing Applications Manufactured Using Innovative Spin Forming.” In Proceedings
of the 13th International Conference on the Technology of Plasticity, edited
by G. Daehn, J. Cao, B. Kinsey, A. E. Tekkaya, A. Vivek, and Y Yoshida, 2115–25.
Forming the Future. The Minerals, Metals & Materials Series. Columbus: Springer,
Cham, 2021. https://doi.org/10.1007/978-3-030-75381-8_178.'
ieee: 'T. Rostek, H. Makeieva, and W. Homberg, “Cutting Blades for Food Processing
Applications Manufactured Using Innovative Spin Forming,” in Proceedings of
the 13th International Conference on the Technology of Plasticity, Columbus,
2021, pp. 2115–2125, doi: 10.1007/978-3-030-75381-8_178.'
mla: Rostek, Tim, et al. “Cutting Blades for Food Processing Applications Manufactured
Using Innovative Spin Forming.” Proceedings of the 13th International Conference
on the Technology of Plasticity, edited by G. Daehn et al., Springer, Cham,
2021, pp. 2115–25, doi:10.1007/978-3-030-75381-8_178.
short: 'T. Rostek, H. Makeieva, W. Homberg, in: G. Daehn, J. Cao, B. Kinsey, A.E.
Tekkaya, A. Vivek, Y. Yoshida (Eds.), Proceedings of the 13th International Conference
on the Technology of Plasticity, Springer, Cham, Columbus, 2021, pp. 2115–2125.'
conference:
location: Columbus
name: ICTP 2021
date_created: 2021-03-12T11:11:35Z
date_updated: 2023-04-27T08:42:00Z
department:
- _id: '156'
doi: 10.1007/978-3-030-75381-8_178
editor:
- first_name: G.
full_name: Daehn, G.
last_name: Daehn
- first_name: J.
full_name: Cao, J.
last_name: Cao
- first_name: B.
full_name: Kinsey, B.
last_name: Kinsey
- first_name: 'A. E. '
full_name: 'Tekkaya, A. E. '
last_name: Tekkaya
- first_name: A.
full_name: Vivek, A.
last_name: Vivek
- first_name: Y
full_name: Yoshida, Y
last_name: Yoshida
language:
- iso: eng
page: 2115-2125
place: Columbus
publication: Proceedings of the 13th International Conference on the Technology of
Plasticity
publication_identifier:
isbn:
- 978-3-030-75380-1
publication_status: published
publisher: Springer, Cham
quality_controlled: '1'
series_title: Forming the Future. The Minerals, Metals & Materials Series.
status: public
title: Cutting Blades for Food Processing Applications Manufactured Using Innovative
Spin Forming
type: conference
user_id: '3469'
year: '2021'
...
---
_id: '22766'
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Investigations and Improvements in 3D-DIC Optical Residual
Stress Analysis—A New Temperature Compensation Method. In: Forming the Future.
Springer, Cham; 2021:2249-2259. doi:10.1007/978-3-030-75381-8_189'
apa: Dahms, F., & Homberg, W. (2021). Investigations and Improvements in 3D-DIC
Optical Residual Stress Analysis—A New Temperature Compensation Method. In Forming
the Future (pp. 2249–2259). Springer, Cham. https://doi.org/10.1007/978-3-030-75381-8_189
bibtex: '@inbook{Dahms_Homberg_2021, title={Investigations and Improvements in 3D-DIC
Optical Residual Stress Analysis—A New Temperature Compensation Method}, DOI={10.1007/978-3-030-75381-8_189},
booktitle={Forming the Future}, publisher={Springer, Cham}, author={Dahms, Frederik
and Homberg, Werner}, year={2021}, pages={2249–2259} }'
chicago: Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in
3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method.”
In Forming the Future, 2249–59. Springer, Cham, 2021. https://doi.org/10.1007/978-3-030-75381-8_189.
ieee: F. Dahms and W. Homberg, “Investigations and Improvements in 3D-DIC Optical
Residual Stress Analysis—A New Temperature Compensation Method,” in Forming
the Future, Springer, Cham, 2021, pp. 2249–2259.
mla: Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in 3D-DIC
Optical Residual Stress Analysis—A New Temperature Compensation Method.” Forming
the Future, Springer, Cham, 2021, pp. 2249–59, doi:10.1007/978-3-030-75381-8_189.
short: 'F. Dahms, W. Homberg, in: Forming the Future, Springer, Cham, 2021, pp.
2249–2259.'
conference:
end_date: 2021-07-30
location: Ohio, USA, VIRTUAL EVENT
name: The 13th International Conference on the Technology of Plasticity
start_date: 2021-07-25
date_created: 2021-07-16T14:55:05Z
date_updated: 2023-04-27T10:30:18Z
department:
- _id: '156'
doi: 10.1007/978-3-030-75381-8_189
language:
- iso: eng
page: 2249-2259
publication: Forming the Future
publication_identifier:
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer, Cham
quality_controlled: '1'
status: public
title: Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A
New Temperature Compensation Method
type: book_chapter
user_id: '64977'
year: '2021'
...
---
_id: '30297'
author:
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rozo Vasquez J, Arian B, Riepold M, Walther F, Homberg W, Trächtler A. Magnetic
Barkhausen noise analysis for microstructural effects separation during flow forming
of metastable austenite 304L. In: Proceedings of the 11th International Workshop
NDT in Progress. ; 2021.'
apa: Rozo Vasquez, J., Arian, B., Riepold, M., Walther, F., Homberg, W., & Trächtler,
A. (2021). Magnetic Barkhausen noise analysis for microstructural effects separation
during flow forming of metastable austenite 304L. Proceedings of the 11th International
Workshop NDT in Progress. ENDT&CM 2021 - 11th International Workshop
NDT in Progress, Prague.
bibtex: '@inproceedings{Rozo Vasquez_Arian_Riepold_Walther_Homberg_Trächtler_2021,
title={Magnetic Barkhausen noise analysis for microstructural effects separation
during flow forming of metastable austenite 304L.}, booktitle={Proceedings of
the 11th International Workshop NDT in Progress}, author={Rozo Vasquez, Julian
and Arian, Bahman and Riepold, Markus and Walther, Frank and Homberg, Werner and
Trächtler, Ansgar}, year={2021} }'
chicago: Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Frank Walther, Werner
Homberg, and Ansgar Trächtler. “Magnetic Barkhausen Noise Analysis for Microstructural
Effects Separation during Flow Forming of Metastable Austenite 304L.” In Proceedings
of the 11th International Workshop NDT in Progress, 2021.
ieee: J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, and A. Trächtler,
“Magnetic Barkhausen noise analysis for microstructural effects separation during
flow forming of metastable austenite 304L.,” presented at the ENDT&CM 2021
- 11th International Workshop NDT in Progress, Prague, 2021.
mla: Rozo Vasquez, Julian, et al. “Magnetic Barkhausen Noise Analysis for Microstructural
Effects Separation during Flow Forming of Metastable Austenite 304L.” Proceedings
of the 11th International Workshop NDT in Progress, 2021.
short: 'J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, A. Trächtler,
in: Proceedings of the 11th International Workshop NDT in Progress, 2021.'
conference:
end_date: 2021.10.07
location: Prague
name: ENDT&CM 2021 - 11th International Workshop NDT in Progress
start_date: 2021.10.04
date_created: 2022-03-15T12:07:17Z
date_updated: 2023-05-02T08:22:02Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: Proceedings of the 11th International Workshop NDT in Progress
quality_controlled: '1'
status: public
title: Magnetic Barkhausen noise analysis for microstructural effects separation during
flow forming of metastable austenite 304L.
type: conference
user_id: '36287'
year: '2021'
...
---
_id: '23465'
abstract:
- lang: eng
text: One of the main objectives of production engineering is to reproducibly manufacture
(complex) defect-free parts. To achieve this, it is necessary to employ an appropriate
process or tool design. While this will generally prove successful, it cannot,
however, offset stochastic defects with local variations in material properties.
Closed-loop process control represents a promising approach for a solution in
this context. The state of the art involves using this approach to control geometric
parameters such as a length. So far, no research or applications have been conducted
with closed-loop control for microstructure and product properties. In the project
on which this paper is based, the local martensite content of parts is to be adjusted
in a highly precise and reproducible manner. The forming process employed is a
special, property-controlled flow-forming process. A model-based controller is
thus to generate corresponding correction values for the tool-path geometry and
tool-path velocity on the basis of online martensite content measurements. For
the controller model, it is planned to use a special process or microstructure
(correlation) model. The planned paper not only describes the experimental setup
but also presents results of initial experimental investigations for subsequent
use in the closed-loop control of α’-martensite content during flow-forming.
author:
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: 'Arian B, Homberg W, Riepold M, Trächtler A, Rozo Vasquez J, Walther F. Forming
of metastable austenitic stainless steel tubes with axially graded martensite
content by flow-forming. In: ULiège Library; 2021.'
apa: Arian, B., Homberg, W., Riepold, M., Trächtler, A., Rozo Vasquez, J., &
Walther, F. (2021). Forming of metastable austenitic stainless steel tubes
with axially graded martensite content by flow-forming. 24th International
Conference on Material Forming - ESAFORM 2021, Liège, Belgium.
bibtex: '@inproceedings{Arian_Homberg_Riepold_Trächtler_Rozo Vasquez_Walther_2021,
place={Liège}, title={Forming of metastable austenitic stainless steel tubes with
axially graded martensite content by flow-forming}, publisher={ULiège Library},
author={Arian, Bahman and Homberg, Werner and Riepold, Markus and Trächtler, Ansgar
and Rozo Vasquez, Julian and Walther, Frank}, year={2021} }'
chicago: 'Arian, Bahman, Werner Homberg, Markus Riepold, Ansgar Trächtler, Julian
Rozo Vasquez, and Frank Walther. “Forming of Metastable Austenitic Stainless Steel
Tubes with Axially Graded Martensite Content by Flow-Forming.” Liège: ULiège Library,
2021.'
ieee: B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, and F. Walther,
“Forming of metastable austenitic stainless steel tubes with axially graded martensite
content by flow-forming,” presented at the 24th International Conference on Material
Forming - ESAFORM 2021, Liège, Belgium, 2021.
mla: Arian, Bahman, et al. Forming of Metastable Austenitic Stainless Steel Tubes
with Axially Graded Martensite Content by Flow-Forming. ULiège Library, 2021.
short: 'B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, F. Walther,
in: ULiège Library, Liège, 2021.'
conference:
end_date: 2021-04-16
location: Liège, Belgium
name: 24th International Conference on Material Forming - ESAFORM 2021
start_date: 2021-04-14
date_created: 2021-08-23T13:00:35Z
date_updated: 2023-05-02T08:27:48Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
keyword:
- Flow-forming
- Spinning
- Process Strategy
- Martensite Content
- Property Control
- Micromagnetic Measurement
- Metastable Austenitic Stainless Steel
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://popups.uliege.be/esaform21/index.php?id=2759
oa: '1'
place: Liège
publication_identifier:
eisbn:
- 978-2-87019-303-7
isbn:
- 978-2-87019-302-0
publication_status: published
publisher: ULiège Library
quality_controlled: '1'
status: public
title: Forming of metastable austenitic stainless steel tubes with axially graded
martensite content by flow-forming
type: conference
user_id: '36287'
year: '2021'
...
---
_id: '30296'
author:
- first_name: Eugen
full_name: Wiens, Eugen
id: '7888'
last_name: Wiens
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Kerstin
full_name: Möhring, Kerstin
last_name: Möhring
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: 'Wiens E, Homberg W, Arian B, Möhring K, Walther F. Forming of Parts with Locally
Defined Mechanical and Ferromagnetic Properties by Flow-Forming. In: Forming
the Future. Springer International Publishing; 2021. doi:10.1007/978-3-030-75381-8_160'
apa: Wiens, E., Homberg, W., Arian, B., Möhring, K., & Walther, F. (2021). Forming
of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming.
In Forming the Future. The 13th International Conference on the Technology
of Plasticity (ICTP 2021), Virtual Event. Springer International Publishing. https://doi.org/10.1007/978-3-030-75381-8_160
bibtex: '@inbook{Wiens_Homberg_Arian_Möhring_Walther_2021, place={Cham}, title={Forming
of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming},
DOI={10.1007/978-3-030-75381-8_160},
booktitle={Forming the Future}, publisher={Springer International Publishing},
author={Wiens, Eugen and Homberg, Werner and Arian, Bahman and Möhring, Kerstin
and Walther, Frank}, year={2021} }'
chicago: 'Wiens, Eugen, Werner Homberg, Bahman Arian, Kerstin Möhring, and Frank
Walther. “Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties
by Flow-Forming.” In Forming the Future. Cham: Springer International Publishing,
2021. https://doi.org/10.1007/978-3-030-75381-8_160.'
ieee: 'E. Wiens, W. Homberg, B. Arian, K. Möhring, and F. Walther, “Forming of Parts
with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming,”
in Forming the Future, Cham: Springer International Publishing, 2021.'
mla: Wiens, Eugen, et al. “Forming of Parts with Locally Defined Mechanical and
Ferromagnetic Properties by Flow-Forming.” Forming the Future, Springer
International Publishing, 2021, doi:10.1007/978-3-030-75381-8_160.
short: 'E. Wiens, W. Homberg, B. Arian, K. Möhring, F. Walther, in: Forming the
Future, Springer International Publishing, Cham, 2021.'
conference:
end_date: 2021.07.30
location: Virtual Event
name: The 13th International Conference on the Technology of Plasticity (ICTP 2021)
start_date: 2021.07.25
date_created: 2022-03-15T10:42:31Z
date_updated: 2023-05-05T11:06:07Z
department:
- _id: '156'
doi: 10.1007/978-3-030-75381-8_160
language:
- iso: eng
place: Cham
publication: Forming the Future
publication_identifier:
isbn:
- '9783030753801'
- '9783030753818'
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties
by Flow-Forming
type: book_chapter
user_id: '7888'
year: '2021'
...
---
_id: '26082'
article_number: '100060'
author:
- first_name: Christian
full_name: Wischer, Christian
id: '72219'
last_name: Wischer
- first_name: Eugen
full_name: Wiens, Eugen
id: '7888'
last_name: Wiens
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: Wischer C, Wiens E, Homberg W. Joining with versatile joining elements formed
by friction spinning. Journal of Advanced Joining Processes. 2021;3. doi:10.1016/j.jajp.2021.100060
apa: Wischer, C., Wiens, E., & Homberg, W. (2021). Joining with versatile joining
elements formed by friction spinning. Journal of Advanced Joining Processes,
3, Article 100060. https://doi.org/10.1016/j.jajp.2021.100060
bibtex: '@article{Wischer_Wiens_Homberg_2021, title={Joining with versatile joining
elements formed by friction spinning}, volume={3}, DOI={10.1016/j.jajp.2021.100060},
number={100060}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier},
author={Wischer, Christian and Wiens, Eugen and Homberg, Werner}, year={2021}
}'
chicago: Wischer, Christian, Eugen Wiens, and Werner Homberg. “Joining with Versatile
Joining Elements Formed by Friction Spinning.” Journal of Advanced Joining
Processes 3 (2021). https://doi.org/10.1016/j.jajp.2021.100060.
ieee: 'C. Wischer, E. Wiens, and W. Homberg, “Joining with versatile joining elements
formed by friction spinning,” Journal of Advanced Joining Processes, vol.
3, Art. no. 100060, 2021, doi: 10.1016/j.jajp.2021.100060.'
mla: Wischer, Christian, et al. “Joining with Versatile Joining Elements Formed
by Friction Spinning.” Journal of Advanced Joining Processes, vol. 3, 100060,
Elsevier, 2021, doi:10.1016/j.jajp.2021.100060.
short: C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3
(2021).
date_created: 2021-10-12T11:55:27Z
date_updated: 2023-05-05T11:08:54Z
department:
- _id: '9'
- _id: '630'
- _id: '156'
doi: 10.1016/j.jajp.2021.100060
intvolume: ' 3'
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Joining with versatile joining elements formed by friction spinning
type: journal_article
user_id: '7888'
volume: 3
year: '2021'
...
---
_id: '22453'
citation:
ama: Wiens E, Wischer C, Homberg W, eds. Development of a Novel Adaptive Joining
Technology Employing Friction-Spun Joint Connectors (FSJC).; 2021. doi:10.25518/esaform21.4682
apa: Wiens, E., Wischer, C., & Homberg, W. (Eds.). (2021). Development of
a novel adaptive joining technology employing Friction-Spun Joint Connectors (FSJC).
https://doi.org/10.25518/esaform21.4682
bibtex: '@book{Wiens_Wischer_Homberg_2021, title={Development of a novel adaptive
joining technology employing Friction-Spun Joint Connectors (FSJC)}, DOI={10.25518/esaform21.4682},
year={2021} }'
chicago: Wiens, Eugen, Christian Wischer, and Werner Homberg, eds. Development
of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors
(FSJC), 2021. https://doi.org/10.25518/esaform21.4682.
ieee: E. Wiens, C. Wischer, and W. Homberg, Eds., Development of a novel adaptive
joining technology employing Friction-Spun Joint Connectors (FSJC). 2021.
mla: Wiens, Eugen, et al., editors. Development of a Novel Adaptive Joining Technology
Employing Friction-Spun Joint Connectors (FSJC). 2021, doi:10.25518/esaform21.4682.
short: E. Wiens, C. Wischer, W. Homberg, eds., Development of a Novel Adaptive Joining
Technology Employing Friction-Spun Joint Connectors (FSJC), 2021.
conference:
name: ESAFORM 2021
date_created: 2021-06-16T07:23:51Z
date_updated: 2023-05-05T11:21:24Z
department:
- _id: '156'
doi: 10.25518/esaform21.4682
editor:
- first_name: Eugen
full_name: Wiens, Eugen
id: '7888'
last_name: Wiens
- first_name: Christian
full_name: Wischer, Christian
id: '72219'
last_name: Wischer
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
language:
- iso: eng
quality_controlled: '1'
status: public
title: Development of a novel adaptive joining technology employing Friction-Spun
Joint Connectors (FSJC)
type: conference_editor
user_id: '7888'
year: '2021'
...
---
_id: '22965'
author:
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: 'Rozo Vasquez J, Arian B, Riepold M, Homberg W, Trächtler A, Walther F. Microstructural
investigation on phase transformation during flow forming of the metastable austenite
AISI 304 . In: 54. Metallographie-Tagung. ; 2020:75-81.'
apa: Rozo Vasquez, J., Arian, B., Riepold, M., Homberg, W., Trächtler, A., &
Walther, F. (2020). Microstructural investigation on phase transformation during
flow forming of the metastable austenite AISI 304 . 54. Metallographie-Tagung,
75–81.
bibtex: '@inproceedings{Rozo Vasquez_Arian_Riepold_Homberg_Trächtler_Walther_2020,
title={Microstructural investigation on phase transformation during flow forming
of the metastable austenite AISI 304 }, booktitle={ 54. Metallographie-Tagung},
author={Rozo Vasquez, Julian and Arian, Bahman and Riepold, Markus and Homberg,
Werner and Trächtler, Ansgar and Walther, Frank}, year={2020}, pages={75–81} }'
chicago: Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Werner Homberg, Ansgar
Trächtler, and Frank Walther. “Microstructural Investigation on Phase Transformation
during Flow Forming of the Metastable Austenite AISI 304 .” In 54. Metallographie-Tagung,
75–81, 2020.
ieee: J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, and F. Walther,
“Microstructural investigation on phase transformation during flow forming of
the metastable austenite AISI 304 ,” in 54. Metallographie-Tagung, 2020,
pp. 75–81.
mla: Rozo Vasquez, Julian, et al. “Microstructural Investigation on Phase Transformation
during Flow Forming of the Metastable Austenite AISI 304 .” 54. Metallographie-Tagung,
2020, pp. 75–81.
short: 'J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, F. Walther,
in: 54. Metallographie-Tagung, 2020, pp. 75–81.'
date_created: 2021-08-09T05:16:50Z
date_updated: 2023-05-02T08:20:55Z
department:
- _id: '153'
- _id: '241'
- _id: '156'
language:
- iso: eng
page: 75-81
publication: ' 54. Metallographie-Tagung'
quality_controlled: '1'
status: public
title: 'Microstructural investigation on phase transformation during flow forming
of the metastable austenite AISI 304 '
type: conference
user_id: '36287'
year: '2020'
...