---
_id: '52613'
abstract:
- lang: eng
text: During resistance spot welding of zinc-coated advanced high-strength
steels (AHSSs) for automotive production, liquid metal embrittlement (LME) cracking
may occur in the event of a combination of various unfavorable influences. In
this study, the interactions of different welding current levels and weld times
on the tendency for LME cracking in third-generation AHSSs were investigated.
LME manifested itself as high-penetration cracks around the circumference of the
spot welds for welding currents closely below the expulsion limit. At the same
time, the observed tendency for LME cracking showed no direct correlation with
the overall heat input of the investigated welding processes. To identify a reliable
indicator of the tendency for LME cracking, the local strain rate at the origin
of the observed cracks was analyzed over the course of the welding process via
finite element simulation. While the local strain rate showed a good correlation
with the process-specific LME cracking tendency, it was difficult to interpret
due to its discontinuous course. Therefore, based on the experimental measurement
of electrode displacement during welding, electrode indentation velocity was proposed
as a descriptive indicator for quantifying cracking tendency.
author:
- first_name: Christoph
full_name: Böhne, Christoph
id: '22483'
last_name: Böhne
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: MAX
full_name: BIEGLER, MAX
last_name: BIEGLER
- first_name: MICHAEL
full_name: RETHMEIER, MICHAEL
last_name: RETHMEIER
citation:
ama: Böhne C, Meschut G, BIEGLER M, RETHMEIER M. The Influence of Electrode Indentation
Rate on LME Formation during RSW. Welding Journal. 2022;101(7):197-207.
doi:10.29391/2022.101.015
apa: Böhne, C., Meschut, G., BIEGLER, M., & RETHMEIER, M. (2022). The Influence
of Electrode Indentation Rate on LME Formation during RSW. Welding Journal,
101(7), 197–207. https://doi.org/10.29391/2022.101.015
bibtex: '@article{Böhne_Meschut_BIEGLER_RETHMEIER_2022, title={The Influence of
Electrode Indentation Rate on LME Formation during RSW}, volume={101}, DOI={10.29391/2022.101.015}, number={7},
journal={Welding Journal}, publisher={American Welding Society}, author={Böhne,
Christoph and Meschut, Gerson and BIEGLER, MAX and RETHMEIER, MICHAEL}, year={2022},
pages={197–207} }'
chicago: 'Böhne, Christoph, Gerson Meschut, MAX BIEGLER, and MICHAEL RETHMEIER.
“The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding
Journal 101, no. 7 (2022): 197–207. https://doi.org/10.29391/2022.101.015.'
ieee: 'C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode
Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101,
no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.'
mla: Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME
Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding
Society, 2022, pp. 197–207, doi:10.29391/2022.101.015.
short: C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022)
197–207.
date_created: 2024-03-18T11:56:12Z
date_updated: 2024-03-18T12:43:49Z
department:
- _id: '157'
doi: 10.29391/2022.101.015
intvolume: ' 101'
issue: '7'
keyword:
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
page: 197-207
publication: Welding Journal
publication_identifier:
issn:
- 0043-2296
- 2689-0445
publication_status: published
publisher: American Welding Society
quality_controlled: '1'
status: public
title: The Influence of Electrode Indentation Rate on LME Formation during RSW
type: journal_article
user_id: '60398'
volume: 101
year: '2022'
...
---
_id: '52615'
author:
- first_name: Christoph
full_name: Böhne, Christoph
id: '22483'
last_name: Böhne
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Böhne C, Meschut G. Reduction of flange widths in resistance spot welding by
application of eccentric electrode cap geometries. Welding and Cutting.
2022;3:208-212. doi:10.53192/WAC202203208
apa: Böhne, C., & Meschut, G. (2022). Reduction of flange widths in resistance
spot welding by application of eccentric electrode cap geometries. Welding
and Cutting, 3, 208–212. https://doi.org/10.53192/WAC202203208
bibtex: '@article{Böhne_Meschut_2022, title={Reduction of flange widths in resistance
spot welding by application of eccentric electrode cap geometries}, volume={3},
DOI={10.53192/WAC202203208 },
journal={Welding and Cutting}, author={Böhne, Christoph and Meschut, Gerson},
year={2022}, pages={208–212} }'
chicago: 'Böhne, Christoph, and Gerson Meschut. “Reduction of Flange Widths in Resistance
Spot Welding by Application of Eccentric Electrode Cap Geometries.” Welding
and Cutting 3 (2022): 208–12. https://doi.org/10.53192/WAC202203208 .'
ieee: 'C. Böhne and G. Meschut, “Reduction of flange widths in resistance spot welding
by application of eccentric electrode cap geometries,” Welding and Cutting,
vol. 3, pp. 208–212, 2022, doi: 10.53192/WAC202203208 .'
mla: Böhne, Christoph, and Gerson Meschut. “Reduction of Flange Widths in Resistance
Spot Welding by Application of Eccentric Electrode Cap Geometries.” Welding
and Cutting, vol. 3, 2022, pp. 208–12, doi:10.53192/WAC202203208 .
short: C. Böhne, G. Meschut, Welding and Cutting 3 (2022) 208–212.
date_created: 2024-03-18T12:04:36Z
date_updated: 2024-03-18T12:43:36Z
department:
- _id: '157'
doi: '10.53192/WAC202203208 '
intvolume: ' 3'
language:
- iso: eng
page: 208-212
publication: Welding and Cutting
publication_status: published
quality_controlled: '1'
status: public
title: Reduction of flange widths in resistance spot welding by application of eccentric
electrode cap geometries
type: journal_article
user_id: '60398'
volume: 3
year: '2022'
...
---
_id: '32283'
author:
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Florian
full_name: Rieker, Florian
last_name: Rieker
- first_name: Dennis
full_name: Meinderink, Dennis
id: '32378'
last_name: Meinderink
orcid: 0000-0002-2755-6514
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Schmolke T, Meschut G, Rieker F, Meinderink D, Grundmeier G. Untersuchung von
Klebverbindungen für Batteriegehäuse. adhäsion KLEBEN & DICHTEN . 2022;66:40-43.
doi:https://doi.org/10.1007/s35145-022-0596-9
apa: Schmolke, T., Meschut, G., Rieker, F., Meinderink, D., & Grundmeier, G.
(2022). Untersuchung von Klebverbindungen für Batteriegehäuse. adhäsion KLEBEN
& DICHTEN , 66, 40–43. https://doi.org/10.1007/s35145-022-0596-9
bibtex: '@article{Schmolke_Meschut_Rieker_Meinderink_Grundmeier_2022, title={Untersuchung
von Klebverbindungen für Batteriegehäuse}, volume={66}, DOI={https://doi.org/10.1007/s35145-022-0596-9},
journal={adhäsion KLEBEN & DICHTEN }, publisher={Springer Nature}, author={Schmolke,
Tobias and Meschut, Gerson and Rieker, Florian and Meinderink, Dennis and Grundmeier,
Guido}, year={2022}, pages={40–43} }'
chicago: 'Schmolke, Tobias, Gerson Meschut, Florian Rieker, Dennis Meinderink, and
Guido Grundmeier. “Untersuchung von Klebverbindungen für Batteriegehäuse.” adhäsion
KLEBEN & DICHTEN 66 (2022): 40–43. https://doi.org/10.1007/s35145-022-0596-9.'
ieee: 'T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, and G. Grundmeier, “Untersuchung
von Klebverbindungen für Batteriegehäuse,” adhäsion KLEBEN & DICHTEN ,
vol. 66, pp. 40–43, 2022, doi: https://doi.org/10.1007/s35145-022-0596-9.'
mla: Schmolke, Tobias, et al. “Untersuchung von Klebverbindungen für Batteriegehäuse.”
adhäsion KLEBEN & DICHTEN , vol. 66, Springer Nature, 2022, pp. 40–43,
doi:https://doi.org/10.1007/s35145-022-0596-9.
short: T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, G. Grundmeier, adhäsion
KLEBEN & DICHTEN 66 (2022) 40–43.
date_created: 2022-06-29T11:41:25Z
date_updated: 2024-03-19T06:08:14Z
department:
- _id: '157'
- _id: '302'
doi: https://doi.org/10.1007/s35145-022-0596-9
intvolume: ' 66'
language:
- iso: ger
page: 40-43
publication: 'adhäsion KLEBEN & DICHTEN '
publication_status: published
publisher: Springer Nature
status: public
title: Untersuchung von Klebverbindungen für Batteriegehäuse
type: journal_article
user_id: '41235'
volume: 66
year: '2022'
...
---
_id: '52687'
author:
- first_name: Philipp
full_name: Bähr, Philipp
last_name: Bähr
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Silke
full_name: Sommer, Silke
last_name: Sommer
citation:
ama: 'Bähr P, Striewe M, Meschut G, Sommer S. Ersatzmodellentwicklung zur Berücksichtigung
der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung
im stahlintensiven Karosseriebau. In: 12. Kolloquium: Gemeinsame Forschung
in der Mechanischen Fügetechnik. ; 2022.'
apa: 'Bähr, P., Striewe, M., Meschut, G., & Sommer, S. (2022). Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau. 12. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik. 12. Kolloquium: Gemeinsame
Forschung in der Mechanischen Fügetechnik.'
bibtex: '@inproceedings{Bähr_Striewe_Meschut_Sommer_2022, title={Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau}, booktitle={12. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik}, author={Bähr, Philipp and
Striewe, Marius and Meschut, Gerson and Sommer, Silke}, year={2022} }'
chicago: 'Bähr, Philipp, Marius Striewe, Gerson Meschut, and Silke Sommer. “Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau.” In 12. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.'
ieee: 'P. Bähr, M. Striewe, G. Meschut, and S. Sommer, “Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau,” presented at the 12.
Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.'
mla: 'Bähr, Philipp, et al. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen
Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung
im stahlintensiven Karosseriebau.” 12. Kolloquium: Gemeinsame Forschung in
der Mechanischen Fügetechnik, 2022.'
short: 'P. Bähr, M. Striewe, G. Meschut, S. Sommer, in: 12. Kolloquium: Gemeinsame
Forschung in der Mechanischen Fügetechnik, 2022.'
conference:
end_date: 2022-11-24
name: '12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik'
start_date: 2022-11-23
date_created: 2024-03-20T13:42:12Z
date_updated: 2024-03-20T13:45:03Z
department:
- _id: '157'
language:
- iso: ger
publication: '12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik'
status: public
title: Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik
in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven
Karosseriebau
type: conference_abstract
user_id: '30228'
year: '2022'
...
---
_id: '31330'
abstract:
- lang: eng
text: Owing to the implementation of multi-material construction methods
in modern lightweight construction and the associated use of adhesive bonding
technology, thermally induced relative displacements of the joining partners occur
during the curing process. The resulting extremely complex thermo-chemo-mechanical
stresses can influence the properties of the adhesive layers and reduce the load-bearing
capacity. In this study, experiments are conducted to examine the influence of
process-related thermal relative displacements on the mechanical properties of
adhesives. The results show an anisotropy of the mechanical properties of the
pre-deformed adhesive layers, depending on the magnitude and direction of the
relative displacement.
article_number: '095440702211001'
article_type: original
author:
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Beule F, Teutenberg D, Meschut G. Directional dependence of the mechanical
properties of structural adhesive joints with curing-induced pre-deformations.
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of
Automobile Engineering. Published online 2022. doi:10.1177/09544070221100130'
apa: 'Beule, F., Teutenberg, D., & Meschut, G. (2022). Directional dependence
of the mechanical properties of structural adhesive joints with curing-induced
pre-deformations. Proceedings of the Institution of Mechanical Engineers, Part
D: Journal of Automobile Engineering, Article 095440702211001. https://doi.org/10.1177/09544070221100130'
bibtex: '@article{Beule_Teutenberg_Meschut_2022, title={Directional dependence of
the mechanical properties of structural adhesive joints with curing-induced pre-deformations},
DOI={10.1177/09544070221100130},
number={095440702211001}, journal={Proceedings of the Institution of Mechanical
Engineers, Part D: Journal of Automobile Engineering}, publisher={SAGE Publications},
author={Beule, Felix and Teutenberg, Dominik and Meschut, Gerson}, year={2022}
}'
chicago: 'Beule, Felix, Dominik Teutenberg, and Gerson Meschut. “Directional Dependence
of the Mechanical Properties of Structural Adhesive Joints with Curing-Induced
Pre-Deformations.” Proceedings of the Institution of Mechanical Engineers,
Part D: Journal of Automobile Engineering, 2022. https://doi.org/10.1177/09544070221100130.'
ieee: 'F. Beule, D. Teutenberg, and G. Meschut, “Directional dependence of the mechanical
properties of structural adhesive joints with curing-induced pre-deformations,”
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of
Automobile Engineering, Art. no. 095440702211001, 2022, doi: 10.1177/09544070221100130.'
mla: 'Beule, Felix, et al. “Directional Dependence of the Mechanical Properties
of Structural Adhesive Joints with Curing-Induced Pre-Deformations.” Proceedings
of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,
095440702211001, SAGE Publications, 2022, doi:10.1177/09544070221100130.'
short: 'F. Beule, D. Teutenberg, G. Meschut, Proceedings of the Institution of Mechanical
Engineers, Part D: Journal of Automobile Engineering (2022).'
date_created: 2022-05-19T05:26:32Z
date_updated: 2023-01-17T08:26:45Z
department:
- _id: '157'
doi: 10.1177/09544070221100130
keyword:
- Mechanical Engineering
- Aerospace Engineering
language:
- iso: eng
publication: 'Proceedings of the Institution of Mechanical Engineers, Part D: Journal
of Automobile Engineering'
publication_identifier:
issn:
- 0954-4070
- 2041-2991
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: Directional dependence of the mechanical properties of structural adhesive
joints with curing-induced pre-deformations
type: journal_article
user_id: '66192'
year: '2022'
...
---
_id: '33002'
abstract:
- lang: eng
text: Many mechanical material properties show a dependence on the strain
rate, e.g. yield stress or elongation at fracture. The quantitative description
of the material behavior under dynamic loading is of major importance for the
evaluation of crash safety. This is carried out using numerical methods and requires
characteristic values for the materials used. For the standardized determination
of dynamic characteristic values in sheet metal materials, tensile tests performed
according to the guideline from [1]. A particular challenge in dynamic tensile
tests is the force measurement during the test. For this purpose, strain gauges
are attached on each specimen, wired to the measuring equipment and calibrated.
This is a common way to determine a force signal that is as low in vibration and
as free of bending moments as possible. The preparation effort for the used strain
gauges are enormous. For these reasons, an optical method to determine the force
by strain measurement using DIC is presented. The experiments are carried out
on a high speed tensile testing system. In combioantion with a 3D DIC high speed
system for optical strain measurement. The elastic deformation of the specimen
in the dynamometric section is measured using strain gauges and the optical method.
The measured signals are then compared to validate the presented method. The investigations
are conducted using the dual phase steel material HCT590X and the aluminum material
EN AW-6014 T4. Strain rates of up to 240 s-1 are investigated.
author:
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Eduard
full_name: Unruh, Eduard
id: '72763'
last_name: Unruh
- first_name: Stanislaw
full_name: Sell, Stanislaw
last_name: Sell
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Böhnke M, Unruh E, Sell S, Bobbert M, Hein D, Meschut G. Functionality Study
of an Optical Measurement Concept for Local Force Signal Determination in High
Strain Rate Tensile Tests. Key Engineering Materials. 2022;926:1564-1572.
doi:10.4028/p-wpuzyw
apa: Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., & Meschut, G. (2022).
Functionality Study of an Optical Measurement Concept for Local Force Signal Determination
in High Strain Rate Tensile Tests. Key Engineering Materials, 926,
1564–1572. https://doi.org/10.4028/p-wpuzyw
bibtex: '@article{Böhnke_Unruh_Sell_Bobbert_Hein_Meschut_2022, title={Functionality
Study of an Optical Measurement Concept for Local Force Signal Determination in
High Strain Rate Tensile Tests}, volume={926}, DOI={10.4028/p-wpuzyw},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Böhnke, Max and Unruh, Eduard and Sell, Stanislaw and Bobbert, Mathias
and Hein, David and Meschut, Gerson}, year={2022}, pages={1564–1572} }'
chicago: 'Böhnke, Max, Eduard Unruh, Stanislaw Sell, Mathias Bobbert, David Hein,
and Gerson Meschut. “Functionality Study of an Optical Measurement Concept for
Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering
Materials 926 (2022): 1564–72. https://doi.org/10.4028/p-wpuzyw.'
ieee: 'M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality
Study of an Optical Measurement Concept for Local Force Signal Determination in
High Strain Rate Tensile Tests,” Key Engineering Materials, vol. 926, pp.
1564–1572, 2022, doi: 10.4028/p-wpuzyw.'
mla: Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept
for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key
Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp.
1564–72, doi:10.4028/p-wpuzyw.
short: M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering
Materials 926 (2022) 1564–1572.
conference:
location: Braga, Portugal
name: ESAFORM 2022
date_created: 2022-08-18T09:33:54Z
date_updated: 2023-01-17T09:02:59Z
department:
- _id: '157'
- _id: '630'
doi: 10.4028/p-wpuzyw
intvolume: ' 926'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 1564-1572
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: Functionality Study of an Optical Measurement Concept for Local Force Signal
Determination in High Strain Rate Tensile Tests
type: journal_article
user_id: '45779'
volume: 926
year: '2022'
...
---
_id: '33003'
author:
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Modified Punch
Test for Investigating the Failure Behavior in Sheet Metal Materials. In: The
Minerals, Metals & Materials Series. Springer International Publishing;
2022. doi:10.1007/978-3-031-06212-4_52'
apa: Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2022). Development
of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal
Materials. In The Minerals, Metals & Materials Series. NUMISHEET
2022, Toronto, Kanada. Springer International Publishing. https://doi.org/10.1007/978-3-031-06212-4_52
bibtex: '@inbook{Böhnke_Bielak_Bobbert_Meschut_2022, place={Cham}, title={Development
of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal
Materials}, DOI={10.1007/978-3-031-06212-4_52},
booktitle={The Minerals, Metals & Materials Series}, publisher={Springer
International Publishing}, author={Böhnke, Max and Bielak, Christian Roman and
Bobbert, Mathias and Meschut, Gerson}, year={2022} }'
chicago: 'Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut.
“Development of a Modified Punch Test for Investigating the Failure Behavior in
Sheet Metal Materials.” In The Minerals, Metals & Materials Series.
Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-031-06212-4_52.'
ieee: 'M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Modified
Punch Test for Investigating the Failure Behavior in Sheet Metal Materials,” in
The Minerals, Metals & Materials Series, Cham: Springer International
Publishing, 2022.'
mla: Böhnke, Max, et al. “Development of a Modified Punch Test for Investigating
the Failure Behavior in Sheet Metal Materials.” The Minerals, Metals &
Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_52.
short: 'M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals
& Materials Series, Springer International Publishing, Cham, 2022.'
conference:
location: Toronto, Kanada
name: NUMISHEET 2022
date_created: 2022-08-18T09:38:39Z
date_updated: 2023-01-17T09:03:25Z
department:
- _id: '157'
- _id: '630'
doi: 10.1007/978-3-031-06212-4_52
language:
- iso: eng
place: Cham
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: The Minerals, Metals & Materials Series
publication_identifier:
isbn:
- '9783031062117'
- '9783031062124'
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Development of a Modified Punch Test for Investigating the Failure Behavior
in Sheet Metal Materials
type: book_chapter
user_id: '45779'
year: '2022'
...
---
_id: '34572'
author:
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and numerical investigation
of the influence of multiaxial loading conditions on the failure behavior of clinched
joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221145886'
apa: 'Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2022). Experimental
and numerical investigation of the influence of multiaxial loading conditions
on the failure behavior of clinched joints. Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.
https://doi.org/10.1177/14644207221145886'
bibtex: '@article{Böhnke_Bielak_Bobbert_Meschut_2022, title={Experimental and numerical
investigation of the influence of multiaxial loading conditions on the failure
behavior of clinched joints}, DOI={10.1177/14644207221145886},
journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications}, publisher={SAGE Journals}, author={Böhnke,
Max and Bielak, Christian Roman and Bobbert, Mathias and Meschut, Gerson}, year={2022}
}'
chicago: 'Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut.
“Experimental and Numerical Investigation of the Influence of Multiaxial Loading
Conditions on the Failure Behavior of Clinched Joints.” Proceedings of the
Institution of Mechanical Engineers, Part L: Journal of Materials: Design and
Applications, 2022. https://doi.org/10.1177/14644207221145886.'
ieee: 'M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and numerical
investigation of the influence of multiaxial loading conditions on the failure
behavior of clinched joints,” Proceedings of the Institution of Mechanical
Engineers, Part L: Journal of Materials: Design and Applications, 2022, doi:
10.1177/14644207221145886.'
mla: 'Böhnke, Max, et al. “Experimental and Numerical Investigation of the Influence
of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.”
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of
Materials: Design and Applications, SAGE Journals, 2022, doi:10.1177/14644207221145886.'
short: 'M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
(2022).'
date_created: 2022-12-20T08:43:00Z
date_updated: 2023-01-17T09:02:49Z
department:
- _id: '157'
doi: 10.1177/14644207221145886
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications'
publisher: SAGE Journals
quality_controlled: '1'
status: public
title: Experimental and numerical investigation of the influence of multiaxial loading
conditions on the failure behavior of clinched joints
type: journal_article
user_id: '45779'
year: '2022'
...
---
_id: '34459'
author:
- first_name: Lars
full_name: Schmelzle, Lars
last_name: Schmelzle
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Gunnar
full_name: Possart, Gunnar
last_name: Possart
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
citation:
ama: Schmelzle L, Striewe M, Mergheim J, et al. Testing, modelling, and parameter
identification for adhesively bonded joints under the influence of temperature.
Journal of Adhesion Science and Technology. Published online 2022. doi:10.1080/01694243.2022.2125714
apa: Schmelzle, L., Striewe, M., Mergheim, J., Meschut, G., Possart, G., Teutenberg,
D., Hein, D., & Steinmann, P. (2022). Testing, modelling, and parameter identification
for adhesively bonded joints under the influence of temperature. Journal of
Adhesion Science and Technology. https://doi.org/10.1080/01694243.2022.2125714
bibtex: '@article{Schmelzle_Striewe_Mergheim_Meschut_Possart_Teutenberg_Hein_Steinmann_2022,
title={Testing, modelling, and parameter identification for adhesively bonded
joints under the influence of temperature}, DOI={10.1080/01694243.2022.2125714},
journal={Journal of Adhesion Science and Technology}, author={Schmelzle, Lars
and Striewe, Marius and Mergheim, Julia and Meschut, Gerson and Possart, Gunnar
and Teutenberg, Dominik and Hein, David and Steinmann, Paul}, year={2022} }'
chicago: Schmelzle, Lars, Marius Striewe, Julia Mergheim, Gerson Meschut, Gunnar
Possart, Dominik Teutenberg, David Hein, and Paul Steinmann. “Testing, Modelling,
and Parameter Identification for Adhesively Bonded Joints under the Influence
of Temperature.” Journal of Adhesion Science and Technology, 2022. https://doi.org/10.1080/01694243.2022.2125714.
ieee: 'L. Schmelzle et al., “Testing, modelling, and parameter identification
for adhesively bonded joints under the influence of temperature,” Journal of
Adhesion Science and Technology, 2022, doi: 10.1080/01694243.2022.2125714.'
mla: Schmelzle, Lars, et al. “Testing, Modelling, and Parameter Identification for
Adhesively Bonded Joints under the Influence of Temperature.” Journal of Adhesion
Science and Technology, 2022, doi:10.1080/01694243.2022.2125714.
short: L. Schmelzle, M. Striewe, J. Mergheim, G. Meschut, G. Possart, D. Teutenberg,
D. Hein, P. Steinmann, Journal of Adhesion Science and Technology (2022).
date_created: 2022-12-16T11:35:13Z
date_updated: 2023-01-17T14:46:01Z
department:
- _id: '157'
doi: 10.1080/01694243.2022.2125714
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Mechanics of Materials
- General Chemistry
language:
- iso: eng
publication: Journal of Adhesion Science and Technology
publication_identifier:
issn:
- 0169-4243
- 1568-5616
publication_status: published
quality_controlled: '1'
status: public
title: Testing, modelling, and parameter identification for adhesively bonded joints
under the influence of temperature
type: journal_article
user_id: '30228'
year: '2022'
...
---
_id: '20446'
author:
- first_name: Stefan
full_name: Neumann, Stefan
id: '54897'
last_name: Neumann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Frederik
full_name: Schmatz, Frederik
last_name: Schmatz
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
citation:
ama: Neumann S, Meschut G, Schmatz F, Flügge W. Robotergestütztes manuelles mechanisches
Fügen – RoboterFügen.
apa: Neumann, S., Meschut, G., Schmatz, F., & Flügge, W. (n.d.). Robotergestütztes
manuelles mechanisches Fügen – RoboterFügen.
bibtex: '@inproceedings{Neumann_Meschut_Schmatz_Flügge, title={Robotergestütztes
manuelles mechanisches Fügen – RoboterFügen}, author={Neumann, Stefan and Meschut,
Gerson and Schmatz, Frederik and Flügge, Wilko} }'
chicago: Neumann, Stefan, Gerson Meschut, Frederik Schmatz, and Wilko Flügge. “Robotergestütztes
manuelles mechanisches Fügen – RoboterFügen,” n.d.
ieee: S. Neumann, G. Meschut, F. Schmatz, and W. Flügge, “Robotergestütztes manuelles
mechanisches Fügen – RoboterFügen.”
mla: Neumann, Stefan, et al. Robotergestütztes manuelles mechanisches Fügen –
RoboterFügen.
short: 'S. Neumann, G. Meschut, F. Schmatz, W. Flügge, in: n.d.'
date_created: 2020-11-20T11:41:31Z
date_updated: 2023-01-17T14:04:56Z
department:
- _id: '157'
language:
- iso: ger
publication_status: accepted
quality_controlled: '1'
status: public
title: Robotergestütztes manuelles mechanisches Fügen – RoboterFügen
type: conference
user_id: '54897'
year: '2022'
...
---
_id: '29853'
author:
- first_name: Karina
full_name: Tews, Karina
id: '40263'
last_name: Tews
- first_name: Tobias
full_name: Aubel, Tobias
last_name: Aubel
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Tobias
full_name: Duffe, Tobias
id: '41322'
last_name: Duffe
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
citation:
ama: 'Tews K, Aubel T, Teutenberg D, Meschut G, Duffe T, Kullmer G. Methodenentwicklung
zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge
zyklischer Beanspruchung mittels bruchmechanischer Ansätze . In: 22. Kolloquium:
Gemeinsame Forschung in der Klebtechnik. ; 2022.'
apa: 'Tews, K., Aubel, T., Teutenberg, D., Meschut, G., Duffe, T., & Kullmer,
G. (2022). Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen
Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze
. 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik. 22. Kolloquium:
Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Tews_Aubel_Teutenberg_Meschut_Duffe_Kullmer_2022, title={Methodenentwicklung
zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge
zyklischer Beanspruchung mittels bruchmechanischer Ansätze }, booktitle={22. Kolloquium:
Gemeinsame Forschung in der Klebtechnik}, author={Tews, Karina and Aubel, Tobias
and Teutenberg, Dominik and Meschut, Gerson and Duffe, Tobias and Kullmer, Gunter},
year={2022} }'
chicago: 'Tews, Karina, Tobias Aubel, Dominik Teutenberg, Gerson Meschut, Tobias
Duffe, and Gunter Kullmer. “Methodenentwicklung zur numerischen Lebensdauerprognose
von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels
bruchmechanischer Ansätze .” In 22. Kolloquium: Gemeinsame Forschung in der
Klebtechnik, 2022.'
ieee: 'K. Tews, T. Aubel, D. Teutenberg, G. Meschut, T. Duffe, and G. Kullmer, “Methodenentwicklung
zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge
zyklischer Beanspruchung mittels bruchmechanischer Ansätze ,” presented at the
22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.'
mla: 'Tews, Karina, et al. “Methodenentwicklung zur numerischen Lebensdauerprognose
von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels
bruchmechanischer Ansätze .” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik,
2022.'
short: 'K. Tews, T. Aubel, D. Teutenberg, G. Meschut, T. Duffe, G. Kullmer, in:
22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.'
conference:
end_date: 2022-02-16
name: '22. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2022-02-15
date_created: 2022-02-16T07:15:44Z
date_updated: 2023-02-08T08:43:39Z
department:
- _id: '157'
- _id: '143'
language:
- iso: ger
publication: '22. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: 'Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen
Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze '
type: conference
user_id: '41322'
year: '2022'
...
---
_id: '32392'
author:
- first_name: Tobias
full_name: Duffe, Tobias
id: '41322'
last_name: Duffe
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
- first_name: Karina
full_name: Tews, Karina
id: '40263'
last_name: Tews
- first_name: Tobias
full_name: Aubel, Tobias
last_name: Aubel
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Duffe T, Kullmer G, Tews K, Aubel T, Meschut G. Global energy release rate
of small penny-shaped cracks in hyperelastic materials under general stress conditions.
Theoretical and Applied Fracture Mechanics. Published online 2022. doi:10.1016/j.tafmec.2022.103461
apa: Duffe, T., Kullmer, G., Tews, K., Aubel, T., & Meschut, G. (2022). Global
energy release rate of small penny-shaped cracks in hyperelastic materials under
general stress conditions. Theoretical and Applied Fracture Mechanics.
https://doi.org/10.1016/j.tafmec.2022.103461
bibtex: '@article{Duffe_Kullmer_Tews_Aubel_Meschut_2022, title={Global energy release
rate of small penny-shaped cracks in hyperelastic materials under general stress
conditions}, DOI={10.1016/j.tafmec.2022.103461},
journal={Theoretical and Applied Fracture Mechanics}, author={Duffe, Tobias and
Kullmer, Gunter and Tews, Karina and Aubel, Tobias and Meschut, Gerson}, year={2022}
}'
chicago: Duffe, Tobias, Gunter Kullmer, Karina Tews, Tobias Aubel, and Gerson Meschut.
“Global Energy Release Rate of Small Penny-Shaped Cracks in Hyperelastic Materials
under General Stress Conditions.” Theoretical and Applied Fracture Mechanics,
2022. https://doi.org/10.1016/j.tafmec.2022.103461.
ieee: 'T. Duffe, G. Kullmer, K. Tews, T. Aubel, and G. Meschut, “Global energy release
rate of small penny-shaped cracks in hyperelastic materials under general stress
conditions,” Theoretical and Applied Fracture Mechanics, 2022, doi: 10.1016/j.tafmec.2022.103461.'
mla: Duffe, Tobias, et al. “Global Energy Release Rate of Small Penny-Shaped Cracks
in Hyperelastic Materials under General Stress Conditions.” Theoretical and
Applied Fracture Mechanics, 2022, doi:10.1016/j.tafmec.2022.103461.
short: T. Duffe, G. Kullmer, K. Tews, T. Aubel, G. Meschut, Theoretical and Applied
Fracture Mechanics (2022).
date_created: 2022-07-18T08:55:11Z
date_updated: 2023-02-08T08:40:26Z
department:
- _id: '143'
- _id: '157'
doi: 10.1016/j.tafmec.2022.103461
language:
- iso: eng
publication: Theoretical and Applied Fracture Mechanics
quality_controlled: '1'
status: public
title: Global energy release rate of small penny-shaped cracks in hyperelastic materials
under general stress conditions
type: journal_article
user_id: '41322'
year: '2022'
...
---
_id: '33088'
author:
- first_name: Tobias
full_name: Duffe, Tobias
id: '41322'
last_name: Duffe
- first_name: Karina
full_name: Tews, Karina
id: '40263'
last_name: Tews
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Duffe T, Tews K, Kullmer G, Meschut G. Fracture mechanical concept to predict
crack nucleation in elastic adhesive joints. In: ECF23, European Conference
on Fracture 2022. ; 2022.'
apa: Duffe, T., Tews, K., Kullmer, G., & Meschut, G. (2022). Fracture mechanical
concept to predict crack nucleation in elastic adhesive joints. ECF23, European
Conference on Fracture 2022. ECF23, European Conference on Fracture 2022.
bibtex: '@inproceedings{Duffe_Tews_Kullmer_Meschut_2022, title={Fracture mechanical
concept to predict crack nucleation in elastic adhesive joints}, booktitle={ECF23,
European Conference on Fracture 2022}, author={Duffe, Tobias and Tews, Karina
and Kullmer, Gunter and Meschut, Gerson}, year={2022} }'
chicago: Duffe, Tobias, Karina Tews, Gunter Kullmer, and Gerson Meschut. “Fracture
Mechanical Concept to Predict Crack Nucleation in Elastic Adhesive Joints.” In
ECF23, European Conference on Fracture 2022, 2022.
ieee: T. Duffe, K. Tews, G. Kullmer, and G. Meschut, “Fracture mechanical concept
to predict crack nucleation in elastic adhesive joints,” presented at the ECF23,
European Conference on Fracture 2022, 2022.
mla: Duffe, Tobias, et al. “Fracture Mechanical Concept to Predict Crack Nucleation
in Elastic Adhesive Joints.” ECF23, European Conference on Fracture 2022,
2022.
short: 'T. Duffe, K. Tews, G. Kullmer, G. Meschut, in: ECF23, European Conference
on Fracture 2022, 2022.'
conference:
name: ECF23, European Conference on Fracture 2022
date_created: 2022-08-23T08:45:23Z
date_updated: 2023-02-08T08:41:58Z
department:
- _id: '143'
- _id: '157'
language:
- iso: eng
publication: ECF23, European Conference on Fracture 2022
status: public
title: Fracture mechanical concept to predict crack nucleation in elastic adhesive
joints
type: conference_abstract
user_id: '41322'
year: '2022'
...
---
_id: '33495'
author:
- first_name: Tobias
full_name: Duffe, Tobias
id: '41322'
last_name: Duffe
- first_name: Karina
full_name: Tews, Karina
id: '40263'
last_name: Tews
- first_name: Tobias
full_name: Aubel, Tobias
last_name: Aubel
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
citation:
ama: Duffe T, Tews K, Aubel T, Meschut G, Kullmer G. Numerische Lebensdauerprognose
von hyperelastischen Klebverbindungen mit einem bruchmechanischen Ansatz. Fachzeitschrift
für Schweißen und verwandte Verfahren. 2022;74(9):570-576.
apa: Duffe, T., Tews, K., Aubel, T., Meschut, G., & Kullmer, G. (2022). Numerische
Lebensdauerprognose von hyperelastischen Klebverbindungen mit einem bruchmechanischen
Ansatz. Fachzeitschrift für Schweißen und verwandte Verfahren, 74(9),
570–576.
bibtex: '@article{Duffe_Tews_Aubel_Meschut_Kullmer_2022, title={Numerische Lebensdauerprognose
von hyperelastischen Klebverbindungen mit einem bruchmechanischen Ansatz}, volume={74},
number={9}, journal={Fachzeitschrift für Schweißen und verwandte Verfahren}, publisher={DVS},
author={Duffe, Tobias and Tews, Karina and Aubel, Tobias and Meschut, Gerson and
Kullmer, Gunter}, year={2022}, pages={570–576} }'
chicago: 'Duffe, Tobias, Karina Tews, Tobias Aubel, Gerson Meschut, and Gunter Kullmer.
“Numerische Lebensdauerprognose von hyperelastischen Klebverbindungen mit einem
bruchmechanischen Ansatz.” Fachzeitschrift für Schweißen und verwandte Verfahren
74, no. 9 (2022): 570–76.'
ieee: T. Duffe, K. Tews, T. Aubel, G. Meschut, and G. Kullmer, “Numerische Lebensdauerprognose
von hyperelastischen Klebverbindungen mit einem bruchmechanischen Ansatz,” Fachzeitschrift
für Schweißen und verwandte Verfahren, vol. 74, no. 9, pp. 570–576, 2022.
mla: Duffe, Tobias, et al. “Numerische Lebensdauerprognose von hyperelastischen
Klebverbindungen mit einem bruchmechanischen Ansatz.” Fachzeitschrift für Schweißen
und verwandte Verfahren, vol. 74, no. 9, DVS, 2022, pp. 570–76.
short: T. Duffe, K. Tews, T. Aubel, G. Meschut, G. Kullmer, Fachzeitschrift für
Schweißen und verwandte Verfahren 74 (2022) 570–576.
date_created: 2022-09-29T07:05:23Z
date_updated: 2023-02-08T08:47:15Z
department:
- _id: '143'
- _id: '157'
intvolume: ' 74'
issue: '9'
language:
- iso: ger
page: 570-576
publication: Fachzeitschrift für Schweißen und verwandte Verfahren
publisher: DVS
status: public
title: Numerische Lebensdauerprognose von hyperelastischen Klebverbindungen mit einem
bruchmechanischen Ansatz
type: journal_article
user_id: '41322'
volume: 74
year: '2022'
...
---
_id: '30153'
author:
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Dennis
full_name: Meinderink, Dennis
id: '32378'
last_name: Meinderink
orcid: 0000-0002-2755-6514
- first_name: Sandra
full_name: Golebiowska, Sandra
last_name: Golebiowska
- first_name: Florian
full_name: Rieker, Florian
last_name: Rieker
- first_name: Christoph
full_name: Ebbert, Christoph
id: '7266'
last_name: Ebbert
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: 'Schmolke T, Teutenberg D, Meschut G, et al. Entwicklung einer Methode zur
Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses
gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur.
In: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., ed. ;
2022.'
apa: Schmolke, T., Teutenberg, D., Meschut, G., Meinderink, D., Golebiowska, S.,
Rieker, F., Ebbert, C., & Grundmeier, G. (2022). Entwicklung einer Methode
zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses
gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur
(DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., Ed.).
bibtex: '@inproceedings{Schmolke_Teutenberg_Meschut_Meinderink_Golebiowska_Rieker_Ebbert_Grundmeier_2022,
title={Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung
eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung
der Interphasenstruktur}, author={Schmolke, Tobias and Teutenberg, Dominik and
Meschut, Gerson and Meinderink, Dennis and Golebiowska, Sandra and Rieker, Florian
and Ebbert, Christoph and Grundmeier, Guido}, editor={DECHEMA, Gesellschaft für
Chemische Technik und Biotechnologie e.V.}, year={2022} }'
chicago: Schmolke, Tobias, Dominik Teutenberg, Gerson Meschut, Dennis Meinderink,
Sandra Golebiowska, Florian Rieker, Christoph Ebbert, and Guido Grundmeier. “Entwicklung
einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines
Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung
der Interphasenstruktur.” edited by DECHEMA, Gesellschaft für Chemische Technik
und Biotechnologie e.V., 2022.
ieee: T. Schmolke et al., “Entwicklung einer Methode zur Bewertung einer
stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer
und medialer Belastung unter Berücksichtigung der Interphasenstruktur,” Online,
2022.
mla: Schmolke, Tobias, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven
Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer
Belastung unter Berücksichtigung der Interphasenstruktur. Edited by DECHEMA,
Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
short: 'T. Schmolke, D. Teutenberg, G. Meschut, D. Meinderink, S. Golebiowska, F.
Rieker, C. Ebbert, G. Grundmeier, in: DECHEMA, Gesellschaft für Chemische Technik
und Biotechnologie e.V. (Ed.), 2022.'
conference:
end_date: 2022-02-16
location: Online
name: '22. Kolloquium Gemeinsame Forschung in der Klebtechnik '
start_date: 2022-02-15
corporate_editor:
- DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
date_created: 2022-03-01T09:10:01Z
date_updated: 2023-03-02T13:32:18Z
department:
- _id: '157'
language:
- iso: ger
publication_status: published
status: public
title: Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung
eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung
der Interphasenstruktur
type: conference
user_id: '44759'
year: '2022'
...
---
_id: '44199'
alternative_title:
- Forschung für die Praxis P 1396 / IGF-Nr. 20788 N
author:
- first_name: Nick
full_name: Chudalla, Nick
id: '41235'
last_name: Chudalla
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Michael
full_name: Wibbeke, Michael
last_name: Wibbeke
- first_name: Aurélie
full_name: Bartley, Aurélie
last_name: Bartley
citation:
ama: Chudalla N, Meschut G, Teutenberg D, Wibbeke M, Bartley A. Analyse des Versagensverhaltens
geklebter Stahl- Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung.
P 1396. Forschungsvereinigung Stahlanwendung e. V.; 2022.
apa: Chudalla, N., Meschut, G., Teutenberg, D., Wibbeke, M., & Bartley, A. (2022).
Analyse des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden
Entfügen in der Karosserieinstandsetzung (P 1396). Forschungsvereinigung Stahlanwendung
e. V.
bibtex: '@book{Chudalla_Meschut_Teutenberg_Wibbeke_Bartley_2022, place={Düsseldorf},
edition={P 1396}, title={Analyse des Versagensverhaltens geklebter Stahl- Verbindungen
beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung}, publisher={Forschungsvereinigung
Stahlanwendung e. V.}, author={Chudalla, Nick and Meschut, Gerson and Teutenberg,
Dominik and Wibbeke, Michael and Bartley, Aurélie}, year={2022} }'
chicago: 'Chudalla, Nick, Gerson Meschut, Dominik Teutenberg, Michael Wibbeke, and
Aurélie Bartley. Analyse des Versagensverhaltens geklebter Stahl- Verbindungen
beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung. P 1396.
Düsseldorf: Forschungsvereinigung Stahlanwendung e. V., 2022.'
ieee: 'N. Chudalla, G. Meschut, D. Teutenberg, M. Wibbeke, and A. Bartley, Analyse
des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden
Entfügen in der Karosserieinstandsetzung, P 1396. Düsseldorf: Forschungsvereinigung
Stahlanwendung e. V., 2022.'
mla: Chudalla, Nick, et al. Analyse des Versagensverhaltens geklebter Stahl-
Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung.
P 1396, Forschungsvereinigung Stahlanwendung e. V., 2022.
short: N. Chudalla, G. Meschut, D. Teutenberg, M. Wibbeke, A. Bartley, Analyse des
Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden Entfügen
in der Karosserieinstandsetzung, P 1396, Forschungsvereinigung Stahlanwendung
e. V., Düsseldorf, 2022.
date_created: 2023-04-26T13:35:54Z
date_updated: 2023-04-26T13:36:12Z
department:
- _id: '157'
edition: P 1396
language:
- iso: ger
place: Düsseldorf
publication_identifier:
isbn:
- 978-3-96780-135-4
publisher: Forschungsvereinigung Stahlanwendung e. V.
status: public
title: Analyse des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden
Entfügen in der Karosserieinstandsetzung
type: book
user_id: '41235'
year: '2022'
...
---
_id: '44209'
alternative_title:
- Fosta-Forschungsberichte
author:
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Pascal
full_name: Vieth, Pascal
last_name: Vieth
- first_name: Dennis
full_name: Meinderink, Dennis
last_name: Meinderink
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Schmolke T, Meschut G, Vieth P, Meinderink D, Grundmeier G. Entwicklung
einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines
Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung
der Interphasenstruktur . P1399 ed. Forschungsvereinigung Stahlanwendung e.
V.; 2022.
apa: Schmolke, T., Meschut, G., Vieth, P., Meinderink, D., & Grundmeier, G.
(2022). Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung
eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung
der Interphasenstruktur (P1399 ed.). Forschungsvereinigung Stahlanwendung
e. V.
bibtex: '@book{Schmolke_Meschut_Vieth_Meinderink_Grundmeier_2022, place={Düsseldorf},
edition={P1399}, title={Entwicklung einer Methode zur Bewertung einer stahlintensiven
Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer
Belastung unter Berücksichtigung der Interphasenstruktur }, publisher={Forschungsvereinigung
Stahlanwendung e. V.}, author={Schmolke, Tobias and Meschut, Gerson and Vieth,
Pascal and Meinderink, Dennis and Grundmeier, Guido}, year={2022} }'
chicago: 'Schmolke, Tobias, Gerson Meschut, Pascal Vieth, Dennis Meinderink, and
Guido Grundmeier. Entwicklung einer Methode zur Bewertung einer stahlintensiven
Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer
Belastung unter Berücksichtigung der Interphasenstruktur . P1399 ed. Düsseldorf:
Forschungsvereinigung Stahlanwendung e. V., 2022.'
ieee: 'T. Schmolke, G. Meschut, P. Vieth, D. Meinderink, and G. Grundmeier, Entwicklung
einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines
Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung
der Interphasenstruktur , P1399 ed. Düsseldorf: Forschungsvereinigung Stahlanwendung
e. V., 2022.'
mla: Schmolke, Tobias, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven
Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer
Belastung unter Berücksichtigung der Interphasenstruktur . P1399 ed., Forschungsvereinigung
Stahlanwendung e. V., 2022.
short: T. Schmolke, G. Meschut, P. Vieth, D. Meinderink, G. Grundmeier, Entwicklung
einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines
Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung
der Interphasenstruktur , P1399 ed., Forschungsvereinigung Stahlanwendung e. V.,
Düsseldorf, 2022.
date_created: 2023-04-27T05:14:47Z
date_updated: 2023-04-27T05:15:59Z
department:
- _id: '157'
edition: P1399
language:
- iso: ger
place: Düsseldorf
publication_identifier:
unknown:
- 978-3-96780-161-3
publication_status: published
publisher: Forschungsvereinigung Stahlanwendung e. V.
status: public
title: 'Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung
eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung
der Interphasenstruktur '
type: book
user_id: '44759'
year: '2022'
...
---
_id: '44213'
author:
- first_name: Johannes
full_name: Göddecke, Johannes
id: '59070'
last_name: Göddecke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Fabian
full_name: Kötz, Fabian
last_name: Kötz
- first_name: Anton
full_name: Matzenmiller, Anton
last_name: Matzenmiller
- first_name: Jannis
full_name: Damm, Jannis
last_name: Damm
- first_name: Matthias
full_name: Albiez, Matthias
last_name: Albiez
- first_name: Thomas
full_name: Ummenhofer, Thomas
last_name: Ummenhofer
citation:
ama: Göddecke J, Meschut G, Kötz F, et al. Experimentelle und numerische Untersuchung
der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.
Forschungsvereinigung Stahlanwendung e.V.; 2022.
apa: Göddecke, J., Meschut, G., Kötz, F., Matzenmiller, A., Damm, J., Albiez, M.,
& Ummenhofer, T. (2022). Experimentelle und numerische Untersuchung der
Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.
Forschungsvereinigung Stahlanwendung e.V.
bibtex: '@book{Göddecke_Meschut_Kötz_Matzenmiller_Damm_Albiez_Ummenhofer_2022, place={Düsseldorf},
title={Experimentelle und numerische Untersuchung der Dämpfungseigenschaften
geklebter Strukturen unter dynamischer Beanspruchung}, publisher={Forschungsvereinigung
Stahlanwendung e.V.}, author={Göddecke, Johannes and Meschut, Gerson and Kötz,
Fabian and Matzenmiller, Anton and Damm, Jannis and Albiez, Matthias and Ummenhofer,
Thomas}, year={2022} }'
chicago: 'Göddecke, Johannes, Gerson Meschut, Fabian Kötz, Anton Matzenmiller, Jannis
Damm, Matthias Albiez, and Thomas Ummenhofer. Experimentelle und numerische
Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer
Beanspruchung. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2022.'
ieee: 'J. Göddecke et al., Experimentelle und numerische Untersuchung
der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.
Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2022.'
mla: Göddecke, Johannes, et al. Experimentelle und numerische Untersuchung der
Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.
Forschungsvereinigung Stahlanwendung e.V., 2022.
short: J. Göddecke, G. Meschut, F. Kötz, A. Matzenmiller, J. Damm, M. Albiez, T.
Ummenhofer, Experimentelle und numerische Untersuchung der Dämpfungseigenschaften
geklebter Strukturen unter dynamischer Beanspruchung, Forschungsvereinigung Stahlanwendung
e.V., Düsseldorf, 2022.
date_created: 2023-04-27T05:45:24Z
date_updated: 2023-04-27T05:45:29Z
department:
- _id: '157'
language:
- iso: ger
page: '404'
place: Düsseldorf
publication_identifier:
isbn:
- 978-3-96780-137-8
publication_status: published
publisher: Forschungsvereinigung Stahlanwendung e.V.
status: public
title: Experimentelle und numerische Untersuchung der Dämpfungseigenschaften geklebter
Strukturen unter dynamischer Beanspruchung
type: book
user_id: '59070'
year: '2022'
...
---
_id: '34216'
abstract:
- lang: eng
text: Mechanical joining technologies are increasingly used in multi-material lightweight
constructions and offer opportunities to create versatile joining processes due
to their low heat input, robustness to metallurgical incompatibilities and various
process variants. They can be categorised into technologies which require an auxiliary
joining element, or do not require an auxiliary joining element. A typical example
for a mechanical joining process with auxiliary joining element is self-piercing
riveting. A wide range of processes exist which are not requiring an auxiliary
joining element. This allows both point-shaped (e.g., by clinching) and line-shaped
(e.g., friction stir welding) joints to be produced. In order to achieve versatile
processes, challenges exist in particular in the creation of intervention possibilities
in the process and the understanding and handling of materials that are difficult
to join, such as fiber reinforced plastics (FRP) or high-strength metals. In addition,
predictive capability is required, which in particular requires accurate process
simulation. Finally, the processes must be measured non-destructively in order
to generate control variables in the process or to investigate the cause-effect
relationship. This paper covers the state of the art in scientific research concerning
mechanical joining and discusses future challenges on the way to versatile mechanical
joining processes.
article_number: '100113'
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: M.
full_name: Merklein, M.
last_name: Merklein
- first_name: A.
full_name: Brosius, A.
last_name: Brosius
- first_name: D.
full_name: Drummer, D.
last_name: Drummer
- first_name: L.
full_name: Fratini, L.
last_name: Fratini
- first_name: U.
full_name: Füssel, U.
last_name: Füssel
- first_name: M.
full_name: Gude, M.
last_name: Gude
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: P.A.F.
full_name: Martins, P.A.F.
last_name: Martins
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: M.
full_name: Lechner, M.
last_name: Lechner
- first_name: R.
full_name: Kupfer, R.
last_name: Kupfer
- first_name: B.
full_name: Gröger, B.
last_name: Gröger
- first_name: Daxin
full_name: Han, Daxin
id: '36544'
last_name: Han
- first_name: J.
full_name: Kalich, J.
last_name: Kalich
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: T.
full_name: Kleffel, T.
last_name: Kleffel
- first_name: D.
full_name: Köhler, D.
last_name: Köhler
- first_name: C.-M.
full_name: Kuball, C.-M.
last_name: Kuball
- first_name: J.
full_name: Popp, J.
last_name: Popp
- first_name: D.
full_name: Römisch, D.
last_name: Römisch
- first_name: J.
full_name: Troschitz, J.
last_name: Troschitz
- first_name: Christian
full_name: Wischer, Christian
id: '72219'
last_name: Wischer
- first_name: S.
full_name: Wituschek, S.
last_name: Wituschek
- first_name: M.
full_name: Wolf, M.
last_name: Wolf
citation:
ama: Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic
deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113
apa: Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U.,
Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R.,
Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M.,
… Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal
of Advanced Joining Processes, 5, Article 100113. https://doi.org/10.1016/j.jajp.2022.100113
bibtex: '@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et
al._2022, title={Review on mechanical joining by plastic deformation}, volume={5},
DOI={10.1016/j.jajp.2022.100113},
number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Meschut, Gerson and Merklein, M. and Brosius, A. and Drummer, D.
and Fratini, L. and Füssel, U. and Gude, M. and Homberg, Werner and Martins, P.A.F.
and Bobbert, Mathias and et al.}, year={2022} }'
chicago: Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel,
M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal
of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113.
ieee: 'G. Meschut et al., “Review on mechanical joining by plastic deformation,”
Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:
10.1016/j.jajp.2022.100113.'
mla: Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”
Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022,
doi:10.1016/j.jajp.2022.100113.
short: G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M.
Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger,
D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D.
Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced
Joining Processes 5 (2022).
date_created: 2022-12-05T21:24:49Z
date_updated: 2023-04-27T08:52:38Z
department:
- _id: '157'
- _id: '156'
- _id: '9'
doi: 10.1016/j.jajp.2022.100113
intvolume: ' 5'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '138'
name: 'TRR 285 – A04: TRR 285 - Subproject A04'
- _id: '137'
name: 'TRR 285 – A03: TRR 285 - Subproject A03'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '145'
name: 'TRR 285 – C01: TRR 285 - Subproject C01'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Review on mechanical joining by plastic deformation
type: journal_article
user_id: '66459'
volume: 5
year: '2022'
...
---
_id: '42874'
author:
- first_name: Johannes
full_name: Göddecke, Johannes
id: '59070'
last_name: Göddecke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Tim
full_name: Göhrs, Tim
last_name: Göhrs
- first_name: Manfred
full_name: Große Gehling, Manfred
last_name: Große Gehling
citation:
ama: 'Göddecke J, Meschut G, Göhrs T, Große Gehling M. Methodenentwicklung zur Auslegung
geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter
Beanspruchungen im Landmaschinen- und Anlagenbau. In: DECHEMA, Gesellschaft für
Chemische Technik und Biotechnologie e.V., ed. ; 2022.'
apa: Göddecke, J., Meschut, G., Göhrs, T., & Große Gehling, M. (2022). Methodenentwicklung
zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung
betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau (DECHEMA,
Gesellschaft für Chemische Technik und Biotechnologie e.V., Ed.).
bibtex: '@inproceedings{Göddecke_Meschut_Göhrs_Große Gehling_2022, place={Frankfurt},
title={Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem
Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen-
und Anlagenbau}, author={Göddecke, Johannes and Meschut, Gerson and Göhrs, Tim
and Große Gehling, Manfred}, editor={DECHEMA, Gesellschaft für Chemische Technik
und Biotechnologie e.V.}, year={2022} }'
chicago: Göddecke, Johannes, Gerson Meschut, Tim Göhrs, and Manfred Große Gehling.
“Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl
unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und
Anlagenbau.” edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie
e.V. Frankfurt, 2022.
ieee: J. Göddecke, G. Meschut, T. Göhrs, and M. Große Gehling, “Methodenentwicklung
zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung
betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau,” Webkonferenz,
2022.
mla: Göddecke, Johannes, et al. Methodenentwicklung zur Auslegung geklebter Verbindungen
aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen
im Landmaschinen- und Anlagenbau. Edited by DECHEMA, Gesellschaft für Chemische
Technik und Biotechnologie e.V., 2022.
short: 'J. Göddecke, G. Meschut, T. Göhrs, M. Große Gehling, in: DECHEMA, Gesellschaft
für Chemische Technik und Biotechnologie e.V. (Ed.), Frankfurt, 2022.'
conference:
end_date: 2022-02-16
location: Webkonferenz
name: 22. Kolloquium gemeinsame Forschung in der Klebtechnik
start_date: 2022-02-15
corporate_editor:
- DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
date_created: 2023-03-08T16:46:33Z
date_updated: 2023-03-08T16:56:52Z
department:
- _id: '157'
language:
- iso: ger
place: Frankfurt
publication_status: published
status: public
title: Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl
unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und
Anlagenbau
type: conference
user_id: '59070'
year: '2022'
...