---
_id: '60905'
author:
- first_name: Moritz
  full_name: Ostermann, Moritz
  id: '44763'
  last_name: Ostermann
  orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Eric
  full_name: Dierkes, Eric
  last_name: Dierkes
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
  orcid: 0009-0001-6433-7839
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Ostermann M, Dierkes E, Marten T, Tröster T. Life Cycle Assessment of Lightweight
    Structures in Vehicles for New Mobility Concepts. In: <i>Proceedings of the 18th
    Conference on Sustainable Development of Energy, Water and Environmental Systems,
    Dubrovnik, Croatia 2023</i>. ; 2023.'
  apa: Ostermann, M., Dierkes, E., Marten, T., &#38; Tröster, T. (2023). Life Cycle
    Assessment of Lightweight Structures in Vehicles for New Mobility Concepts. <i>Proceedings
    of the 18th Conference on Sustainable Development of Energy, Water and Environmental
    Systems, Dubrovnik, Croatia 2023</i>. 18th Conference on Sustainable Development
    of Energy, Water and Environmental Systems, Dubrovnik, Croatia.
  bibtex: '@inproceedings{Ostermann_Dierkes_Marten_Tröster_2023, title={Life Cycle
    Assessment of Lightweight Structures in Vehicles for New Mobility Concepts}, booktitle={Proceedings
    of the 18th Conference on Sustainable Development of Energy, Water and Environmental
    Systems, Dubrovnik, Croatia 2023}, author={Ostermann, Moritz and Dierkes, Eric
    and Marten, Thorsten and Tröster, Thomas}, year={2023} }'
  chicago: Ostermann, Moritz, Eric Dierkes, Thorsten Marten, and Thomas Tröster. “Life
    Cycle Assessment of Lightweight Structures in Vehicles for New Mobility Concepts.”
    In <i>Proceedings of the 18th Conference on Sustainable Development of Energy,
    Water and Environmental Systems, Dubrovnik, Croatia 2023</i>, 2023.
  ieee: M. Ostermann, E. Dierkes, T. Marten, and T. Tröster, “Life Cycle Assessment
    of Lightweight Structures in Vehicles for New Mobility Concepts,” presented at
    the 18th Conference on Sustainable Development of Energy, Water and Environmental
    Systems, Dubrovnik, Croatia, 2023.
  mla: Ostermann, Moritz, et al. “Life Cycle Assessment of Lightweight Structures
    in Vehicles for New Mobility Concepts.” <i>Proceedings of the 18th Conference
    on Sustainable Development of Energy, Water and Environmental Systems, Dubrovnik,
    Croatia 2023</i>, 2023.
  short: 'M. Ostermann, E. Dierkes, T. Marten, T. Tröster, in: Proceedings of the
    18th Conference on Sustainable Development of Energy, Water and Environmental
    Systems, Dubrovnik, Croatia 2023, 2023.'
conference:
  end_date: 2023-09-29
  location: Dubrovnik, Croatia
  name: 18th Conference on Sustainable Development of Energy, Water and Environmental
    Systems
  start_date: 2023-09-24
date_created: 2025-08-07T06:56:09Z
date_updated: 2026-02-17T10:36:25Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication: Proceedings of the 18th Conference on Sustainable Development of Energy,
  Water and Environmental Systems, Dubrovnik, Croatia 2023
publication_status: published
status: public
title: Life Cycle Assessment of Lightweight Structures in Vehicles for New Mobility
  Concepts
type: conference_abstract
user_id: '338'
year: '2023'
...
---
_id: '32819'
author:
- first_name: Florian
  full_name: Pfeifer, Florian
  id: '22717'
  last_name: Pfeifer
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: André
  full_name: Dietrich, André
  last_name: Dietrich
- first_name: Bernard
  full_name: Nacke, Bernard
  last_name: Nacke
- first_name: Guido
  full_name: Grundmeier, Guido
  id: '194'
  last_name: Grundmeier
citation:
  ama: 'Pfeifer F, Tröster T, Marten T, Dietrich A, Nacke B, Grundmeier G. Investigation
    on hot sheet metal forming by means of a longitudinal flux inductor. In: <i>Proceedings
    of the 6th International Conference on Steels in Cars and Trucks</i>. ; 2022.'
  apa: Pfeifer, F., Tröster, T., Marten, T., Dietrich, A., Nacke, B., &#38; Grundmeier,
    G. (2022). Investigation on hot sheet metal forming by means of a longitudinal
    flux inductor. <i>Proceedings of the 6th International Conference on Steels in
    Cars and Trucks</i>. 6th International Conference on Steels in Cars and Trucks,
    Mailand.
  bibtex: '@inproceedings{Pfeifer_Tröster_Marten_Dietrich_Nacke_Grundmeier_2022, title={Investigation
    on hot sheet metal forming by means of a longitudinal flux inductor}, booktitle={Proceedings
    of the 6th International Conference on Steels in Cars and Trucks}, author={Pfeifer,
    Florian and Tröster, Thomas and Marten, Thorsten and Dietrich, André and Nacke,
    Bernard and Grundmeier, Guido}, year={2022} }'
  chicago: Pfeifer, Florian, Thomas Tröster, Thorsten Marten, André Dietrich, Bernard
    Nacke, and Guido Grundmeier. “Investigation on Hot Sheet Metal Forming by Means
    of a Longitudinal Flux Inductor.” In <i>Proceedings of the 6th International Conference
    on Steels in Cars and Trucks</i>, 2022.
  ieee: F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, and G. Grundmeier,
    “Investigation on hot sheet metal forming by means of a longitudinal flux inductor,”
    presented at the 6th International Conference on Steels in Cars and Trucks, Mailand,
    2022.
  mla: Pfeifer, Florian, et al. “Investigation on Hot Sheet Metal Forming by Means
    of a Longitudinal Flux Inductor.” <i>Proceedings of the 6th International Conference
    on Steels in Cars and Trucks</i>, 2022.
  short: 'F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, G. Grundmeier,
    in: Proceedings of the 6th International Conference on Steels in Cars and Trucks,
    2022.'
conference:
  end_date: 2022-06-23
  location: Mailand
  name: 6th International Conference on Steels in Cars and Trucks
  start_date: 2022-06-19
date_created: 2022-08-16T07:06:48Z
date_updated: 2023-01-18T14:43:10Z
department:
- _id: '149'
- _id: '321'
- _id: '9'
language:
- iso: eng
publication: Proceedings of the 6th International Conference on Steels in Cars and
  Trucks
status: public
title: Investigation on hot sheet metal forming by means of a longitudinal flux inductor
type: conference
user_id: '22717'
year: '2022'
...
---
_id: '49433'
author:
- first_name: Maximilian Alexander
  full_name: Kaiser, Maximilian Alexander
  id: '72351'
  last_name: Kaiser
  orcid: 0009-0008-1333-3396
- first_name: Pawel
  full_name: Rockicki, Pawel
  last_name: Rockicki
- first_name: Fabian
  full_name: Höschen, Fabian
  last_name: Höschen
- first_name: Jan-Niklas
  full_name: Wesendahl, Jan-Niklas
  last_name: Wesendahl
- first_name: Stefan
  full_name: Konrad, Stefan
  last_name: Konrad
- first_name: Thomas
  full_name: Meyer, Thomas
  last_name: Meyer
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
  orcid: 0009-0001-6433-7839
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Kaiser MA, Rockicki P, Höschen F, et al.  Heat transfer coefficient investigation
    for hot die quenching process of Ti-6Al-4V alloy. In: ; 2022.'
  apa: Kaiser, M. A., Rockicki, P., Höschen, F., Wesendahl, J.-N., Konrad, S., Meyer,
    T., Marten, T., &#38; Tröster, T. (2022). <i> Heat transfer coefficient investigation
    for hot die quenching process of Ti-6Al-4V alloy</i>. Titanium USA 2022 Conference
    , Orlando.
  bibtex: '@inproceedings{Kaiser_Rockicki_Höschen_Wesendahl_Konrad_Meyer_Marten_Tröster_2022,
    title={ Heat transfer coefficient investigation for hot die quenching process
    of Ti-6Al-4V alloy}, author={Kaiser, Maximilian Alexander and Rockicki, Pawel
    and Höschen, Fabian and Wesendahl, Jan-Niklas and Konrad, Stefan and Meyer, Thomas
    and Marten, Thorsten and Tröster, Thomas}, year={2022} }'
  chicago: Kaiser, Maximilian Alexander, Pawel Rockicki, Fabian Höschen, Jan-Niklas
    Wesendahl, Stefan Konrad, Thomas Meyer, Thorsten Marten, and Thomas Tröster. “
    Heat Transfer Coefficient Investigation for Hot Die Quenching Process of Ti-6Al-4V
    Alloy,” 2022.
  ieee: M. A. Kaiser <i>et al.</i>, “ Heat transfer coefficient investigation for
    hot die quenching process of Ti-6Al-4V alloy,” presented at the Titanium USA 2022
    Conference , Orlando, 2022.
  mla: Kaiser, Maximilian Alexander, et al. <i> Heat Transfer Coefficient Investigation
    for Hot Die Quenching Process of Ti-6Al-4V Alloy</i>. 2022.
  short: 'M.A. Kaiser, P. Rockicki, F. Höschen, J.-N. Wesendahl, S. Konrad, T. Meyer,
    T. Marten, T. Tröster, in: 2022.'
conference:
  end_date: 2022-10-12
  location: Orlando
  name: 'Titanium USA 2022 Conference '
  start_date: 2022-10-09
date_created: 2023-12-04T10:17:16Z
date_updated: 2025-05-19T11:46:03Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
keyword:
- Ti-6Al-4V
- heat transfer coefficient
language:
- iso: eng
status: public
title: ' Heat transfer coefficient investigation for hot die quenching process of
  Ti-6Al-4V alloy'
type: conference_abstract
user_id: '72351'
year: '2022'
...
---
_id: '36112'
author:
- first_name: Florian
  full_name: Pfeifer, Florian
  id: '22717'
  last_name: Pfeifer
- first_name: Lukas
  full_name: Knorr, Lukas
  id: '90391'
  last_name: Knorr
- first_name: Florian
  full_name: Schlosser, Florian
  id: '88614'
  last_name: Schlosser
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
  orcid: 0009-0001-6433-7839
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Pfeifer F, Knorr L, Schlosser F, Marten T, Tröster T. Ecological and Economical
    Feasibility of Inductive Heating for Sustainable Press Hardening Processes. In:
    ; 2022.'
  apa: Pfeifer, F., Knorr, L., Schlosser, F., Marten, T., &#38; Tröster, T. (2022).
    <i>Ecological and Economical Feasibility of Inductive Heating for Sustainable
    Press Hardening Processes</i>. 17th Conference on Sustainable Development of Energy,
    Water and Environment Systems (SDEWES), Paphos, Zypern.
  bibtex: '@inproceedings{Pfeifer_Knorr_Schlosser_Marten_Tröster_2022, title={Ecological
    and Economical Feasibility of Inductive Heating for Sustainable Press Hardening
    Processes}, author={Pfeifer, Florian and Knorr, Lukas and Schlosser, Florian and
    Marten, Thorsten and Tröster, Thomas}, year={2022} }'
  chicago: Pfeifer, Florian, Lukas Knorr, Florian Schlosser, Thorsten Marten, and
    Thomas Tröster. “Ecological and Economical Feasibility of Inductive Heating for
    Sustainable Press Hardening Processes,” 2022.
  ieee: F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, and T. Tröster, “Ecological
    and Economical Feasibility of Inductive Heating for Sustainable Press Hardening
    Processes,” presented at the 17th Conference on Sustainable Development of Energy,
    Water and Environment Systems (SDEWES), Paphos, Zypern, 2022.
  mla: Pfeifer, Florian, et al. <i>Ecological and Economical Feasibility of Inductive
    Heating for Sustainable Press Hardening Processes</i>. 2022.
  short: 'F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, T. Tröster, in: 2022.'
conference:
  end_date: 2022-11-10
  location: Paphos, Zypern
  name: 17th Conference on Sustainable Development of Energy, Water and Environment
    Systems (SDEWES)
  start_date: 2022-11-06
date_created: 2023-01-11T12:51:48Z
date_updated: 2025-06-06T07:53:26Z
department:
- _id: '644'
language:
- iso: eng
status: public
title: Ecological and Economical Feasibility of Inductive Heating for Sustainable
  Press Hardening Processes
type: conference
user_id: '88614'
year: '2022'
...
---
_id: '32875'
author:
- first_name: Moritz
  full_name: Ostermann, Moritz
  id: '44763'
  last_name: Ostermann
  orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Jonathan
  full_name: Behm, Jonathan
  id: '50525'
  last_name: Behm
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
  orcid: 0009-0001-6433-7839
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Johannes
  full_name: Weyer, Johannes
  last_name: Weyer
- first_name: Kay
  full_name: Cepera, Kay
  last_name: Cepera
- first_name: Fabian
  full_name: Adelt, Fabian
  last_name: Adelt
citation:
  ama: 'Ostermann M, Behm J, Marten T, et al. Individualisierung des ÖPNV - Integration
    technischer und sozialer Dimensionen nachhaltiger Mobilität. In: <i>14. Wissenschaftsforum
    Mobilität</i>. ; 2022.'
  apa: Ostermann, M., Behm, J., Marten, T., Tröster, T., Weyer, J., Cepera, K., &#38;
    Adelt, F. (2022). Individualisierung des ÖPNV - Integration technischer und sozialer
    Dimensionen nachhaltiger Mobilität. <i>14. Wissenschaftsforum Mobilität</i>. 14.
    Wissenschaftsforum Mobilität, Duisburg.
  bibtex: '@inproceedings{Ostermann_Behm_Marten_Tröster_Weyer_Cepera_Adelt_2022, place={Duisburg,
    Germany}, title={Individualisierung des ÖPNV - Integration technischer und sozialer
    Dimensionen nachhaltiger Mobilität}, booktitle={14. Wissenschaftsforum Mobilität},
    author={Ostermann, Moritz and Behm, Jonathan and Marten, Thorsten and Tröster,
    Thomas and Weyer, Johannes and Cepera, Kay and Adelt, Fabian}, year={2022} }'
  chicago: Ostermann, Moritz, Jonathan Behm, Thorsten Marten, Thomas Tröster, Johannes
    Weyer, Kay Cepera, and Fabian Adelt. “Individualisierung Des ÖPNV - Integration
    Technischer Und Sozialer Dimensionen Nachhaltiger Mobilität.” In <i>14. Wissenschaftsforum
    Mobilität</i>. Duisburg, Germany, 2022.
  ieee: M. Ostermann <i>et al.</i>, “Individualisierung des ÖPNV - Integration technischer
    und sozialer Dimensionen nachhaltiger Mobilität,” presented at the 14. Wissenschaftsforum
    Mobilität, Duisburg, 2022.
  mla: Ostermann, Moritz, et al. “Individualisierung Des ÖPNV - Integration Technischer
    Und Sozialer Dimensionen Nachhaltiger Mobilität.” <i>14. Wissenschaftsforum Mobilität</i>,
    2022.
  short: 'M. Ostermann, J. Behm, T. Marten, T. Tröster, J. Weyer, K. Cepera, F. Adelt,
    in: 14. Wissenschaftsforum Mobilität, Duisburg, Germany, 2022.'
conference:
  end_date: 23.06.2022
  location: Duisburg
  name: 14. Wissenschaftsforum Mobilität
  start_date: 23.06.2022
date_created: 2022-08-17T11:32:21Z
date_updated: 2025-08-24T11:57:17Z
department:
- _id: '321'
- _id: '149'
language:
- iso: eng
place: Duisburg, Germany
publication: 14. Wissenschaftsforum Mobilität
status: public
title: Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen
  nachhaltiger Mobilität
type: conference_abstract
user_id: '44763'
year: '2022'
...
---
_id: '22518'
article_number: '012052'
author:
- first_name: Marcel
  full_name: Triebus, Marcel
  id: '66036'
  last_name: Triebus
- first_name: Jan
  full_name: Gierse, Jan
  id: '28610'
  last_name: Gierse
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Triebus M, Gierse J, Marten T, Tröster T. A new Device for Determination of
    Forming-Limit-Curves under Hot-Forming Conditions. <i>IOP Conference Series: Materials
    Science and Engineering</i>. Published online 2021. doi:<a href="https://doi.org/10.1088/1757-899x/1157/1/012052">10.1088/1757-899x/1157/1/012052</a>'
  apa: 'Triebus, M., Gierse, J., Marten, T., &#38; Tröster, T. (2021). A new Device
    for Determination of Forming-Limit-Curves under Hot-Forming Conditions. <i>IOP
    Conference Series: Materials Science and Engineering</i>, Article 012052. 40th
    International Deep-Drawing Research Group Conference (IDDRG 2021), Virtual - Stuttgart.
    <a href="https://doi.org/10.1088/1757-899x/1157/1/012052">https://doi.org/10.1088/1757-899x/1157/1/012052</a>'
  bibtex: '@article{Triebus_Gierse_Marten_Tröster_2021, title={A new Device for Determination
    of Forming-Limit-Curves under Hot-Forming Conditions}, DOI={<a href="https://doi.org/10.1088/1757-899x/1157/1/012052">10.1088/1757-899x/1157/1/012052</a>},
    number={012052}, journal={IOP Conference Series: Materials Science and Engineering},
    publisher={IOP Publishing Ltd}, author={Triebus, Marcel and Gierse, Jan and Marten,
    Thorsten and Tröster, Thomas}, year={2021} }'
  chicago: 'Triebus, Marcel, Jan Gierse, Thorsten Marten, and Thomas Tröster. “A New
    Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.”
    <i>IOP Conference Series: Materials Science and Engineering</i>, 2021. <a href="https://doi.org/10.1088/1757-899x/1157/1/012052">https://doi.org/10.1088/1757-899x/1157/1/012052</a>.'
  ieee: 'M. Triebus, J. Gierse, T. Marten, and T. Tröster, “A new Device for Determination
    of Forming-Limit-Curves under Hot-Forming Conditions,” <i>IOP Conference Series:
    Materials Science and Engineering</i>, Art. no. 012052, 2021, doi: <a href="https://doi.org/10.1088/1757-899x/1157/1/012052">10.1088/1757-899x/1157/1/012052</a>.'
  mla: 'Triebus, Marcel, et al. “A New Device for Determination of Forming-Limit-Curves
    under Hot-Forming Conditions.” <i>IOP Conference Series: Materials Science and
    Engineering</i>, 012052, IOP Publishing Ltd, 2021, doi:<a href="https://doi.org/10.1088/1757-899x/1157/1/012052">10.1088/1757-899x/1157/1/012052</a>.'
  short: 'M. Triebus, J. Gierse, T. Marten, T. Tröster, IOP Conference Series: Materials
    Science and Engineering (2021).'
conference:
  end_date: 2021-07-02
  location: Virtual - Stuttgart
  name: 40th International Deep-Drawing Research Group Conference (IDDRG 2021)
  start_date: 2021-06-21
date_created: 2021-06-28T14:57:26Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1088/1757-899x/1157/1/012052
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://iopscience.iop.org/article/10.1088/1757-899X/1157/1/012052/pdf
oa: '1'
publication: 'IOP Conference Series: Materials Science and Engineering'
publication_identifier:
  issn:
  - 1757-8981
  - 1757-899X
publication_status: published
publisher: IOP Publishing Ltd
status: public
title: A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions
type: journal_article
user_id: '66036'
year: '2021'
...
---
_id: '26994'
author:
- first_name: Tim
  full_name: Stallmeister, Tim
  id: '45538'
  last_name: Stallmeister
- first_name: Sven
  full_name: Martin, Sven
  id: '38177'
  last_name: Martin
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Stallmeister T, Martin S, Marten T, Tröster T. Experimental investigation
    on lightweight potentials of fiber-metal-laminates for automotive battery cases.
    In: ; 2021.'
  apa: Stallmeister, T., Martin, S., Marten, T., &#38; Tröster, T. (2021). <i>Experimental
    investigation on lightweight potentials of fiber-metal-laminates for automotive
    battery cases</i>. Automotive Circle conference – Battery Systems in Car Body
    Engineering 2021, Bad Nauheim.
  bibtex: '@inproceedings{Stallmeister_Martin_Marten_Tröster_2021, title={Experimental
    investigation on lightweight potentials of fiber-metal-laminates for automotive
    battery cases}, author={Stallmeister, Tim and Martin, Sven and Marten, Thorsten
    and Tröster, Thomas}, year={2021} }'
  chicago: Stallmeister, Tim, Sven Martin, Thorsten Marten, and Thomas Tröster. “Experimental
    Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive
    Battery Cases,” 2021.
  ieee: T. Stallmeister, S. Martin, T. Marten, and T. Tröster, “Experimental investigation
    on lightweight potentials of fiber-metal-laminates for automotive battery cases,”
    presented at the Automotive Circle conference – Battery Systems in Car Body Engineering
    2021, Bad Nauheim, 2021.
  mla: Stallmeister, Tim, et al. <i>Experimental Investigation on Lightweight Potentials
    of Fiber-Metal-Laminates for Automotive Battery Cases</i>. 2021.
  short: 'T. Stallmeister, S. Martin, T. Marten, T. Tröster, in: 2021.'
conference:
  end_date: 2021-10-27
  location: Bad Nauheim
  name: Automotive Circle conference – Battery Systems in Car Body Engineering 2021
  start_date: 2021-10-26
date_created: 2021-10-28T13:44:02Z
date_updated: 2023-04-28T11:58:31Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Experimental investigation on lightweight potentials of fiber-metal-laminates
  for automotive battery cases
type: conference
user_id: '38177'
year: '2021'
...
---
_id: '16793'
author:
- first_name: Florian
  full_name: Pfeifer, Florian
  id: '22717'
  last_name: Pfeifer
- first_name: André
  full_name: Dietrich, André
  last_name: Dietrich
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Bernard
  full_name: Nacke, Bernard
  last_name: Nacke
citation:
  ama: 'Pfeifer F, Dietrich A, Marten T, Tröster T, Nacke B. Investigation on Inductive
    Heating of Sheet Metal for an Industrial Hot Stamping Process. In: <i>Proceedings
    of 7th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel</i>. ; 2019:585-593.'
  apa: Pfeifer, F., Dietrich, A., Marten, T., Tröster, T., &#38; Nacke, B. (2019).
    Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping
    Process. In <i>Proceedings of 7th International Conference on Hot Sheet Metal
    Forming of High-Performance Steel</i> (pp. 585–593). Luleå.
  bibtex: '@inproceedings{Pfeifer_Dietrich_Marten_Tröster_Nacke_2019, title={Investigation
    on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process}, booktitle={Proceedings
    of 7th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel}, author={Pfeifer, Florian and Dietrich, André and Marten, Thorsten and
    Tröster, Thomas and Nacke, Bernard}, year={2019}, pages={585–593} }'
  chicago: Pfeifer, Florian, André Dietrich, Thorsten Marten, Thomas Tröster, and
    Bernard Nacke. “Investigation on Inductive Heating of Sheet Metal for an Industrial
    Hot Stamping Process.” In <i>Proceedings of 7th International Conference on Hot
    Sheet Metal Forming of High-Performance Steel</i>, 585–93, 2019.
  ieee: F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, and B. Nacke, “Investigation
    on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process,” in
    <i>Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel</i>, Luleå, 2019, pp. 585–593.
  mla: Pfeifer, Florian, et al. “Investigation on Inductive Heating of Sheet Metal
    for an Industrial Hot Stamping Process.” <i>Proceedings of 7th International Conference
    on Hot Sheet Metal Forming of High-Performance Steel</i>, 2019, pp. 585–93.
  short: 'F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, B. Nacke, in: Proceedings
    of 7th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel, 2019, pp. 585–593.'
conference:
  end_date: 2019-06-05
  location: Luleå
  name: 7th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel
  start_date: 2091-06-02
date_created: 2020-04-21T13:39:45Z
date_updated: 2022-01-06T06:52:56Z
department:
- _id: '149'
language:
- iso: eng
page: 585-593
publication: Proceedings of 7th International Conference on Hot Sheet Metal Forming
  of High-Performance Steel
publication_identifier:
  isbn:
  - 978-3-95735-104-3
status: public
title: Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping
  Process
type: conference
user_id: '22717'
year: '2019'
...
---
_id: '16029'
author:
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Marten T, Tröster T. <i>Einsatz neuartiger Stähle und Generierung gradierter
    Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf: Forschungsvereinigung
    Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH;
    2019.'
  apa: 'Marten, T., &#38; Tröster, T. (2019). <i>Einsatz neuartiger Stähle und Generierung
    gradierter Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf: Forschungsvereinigung
    Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH.'
  bibtex: '@book{Marten_Tröster_2019, place={Düsseldorf}, title={Einsatz neuartiger
    Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess}, publisher={Forschungsvereinigung
    Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH},
    author={Marten, Thorsten and Tröster, Thomas}, year={2019} }'
  chicago: 'Marten, Thorsten, and Thomas Tröster. <i>Einsatz neuartiger Stähle und
    Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf:
    Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft
    mbH, 2019.'
  ieee: 'T. Marten and T. Tröster, <i>Einsatz neuartiger Stähle und Generierung gradierter
    Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf: Forschungsvereinigung
    Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH,
    2019.'
  mla: Marten, Thorsten, and Thomas Tröster. <i>Einsatz neuartiger Stähle und Generierung
    gradierter Leichtbaustrukturen im Presshärteprozess</i>. Forschungsvereinigung
    Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH,
    2019.
  short: T. Marten, T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter
    Leichtbaustrukturen im Presshärteprozess, Forschungsvereinigung Stahlanwendung
    e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, Düsseldorf,
    2019.
date_created: 2020-02-24T14:35:08Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
place: Düsseldorf
publisher: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag
  und Vertriebsgesellschaft mbH
report_number: P920
status: public
title: Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im
  Presshärteprozess
type: report
user_id: '72008'
year: '2019'
...
---
_id: '16030'
author:
- first_name: Marcel
  full_name: Triebus, Marcel
  id: '66036'
  last_name: Triebus
- first_name: S.
  full_name: Bienia, S.
  last_name: Bienia
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
  orcid: 0009-0001-6433-7839
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: K.
  full_name: Dröder, K.
  last_name: Dröder
citation:
  ama: 'Triebus M, Bienia S, Marten T, Tröster T, Dröder K. Press Hardening Integrated
    Structuring for Hybrid Components. In: Oldenburg M, Hardell J, Casellas D, eds.
    <i>Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance
    Steel</i>. Verlag Wissenschaftliche Scripten; 2019.'
  apa: Triebus, M., Bienia, S., Marten, T., Tröster, T., &#38; Dröder, K. (2019).
    Press Hardening Integrated Structuring for Hybrid Components. In M. Oldenburg,
    J. Hardell, &#38; D. Casellas (Eds.), <i>Proceedings of 7th International Conference
    Hot Sheet Metal Forming of High-Performance Steel</i>. Verlag Wissenschaftliche
    Scripten.
  bibtex: '@inproceedings{Triebus_Bienia_Marten_Tröster_Dröder_2019, title={Press
    Hardening Integrated Structuring for Hybrid Components}, booktitle={Proceedings
    of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel},
    publisher={Verlag Wissenschaftliche Scripten}, author={Triebus, Marcel and Bienia,
    S. and Marten, Thorsten and Tröster, Thomas and Dröder, K.}, editor={Oldenburg,
    Mats and Hardell, Jens and Casellas, Daniel}, year={2019} }'
  chicago: Triebus, Marcel, S. Bienia, Thorsten Marten, Thomas Tröster, and K. Dröder.
    “Press Hardening Integrated Structuring for Hybrid Components.” In <i>Proceedings
    of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel</i>,
    edited by Mats Oldenburg, Jens Hardell, and Daniel Casellas. Verlag Wissenschaftliche
    Scripten, 2019.
  ieee: M. Triebus, S. Bienia, T. Marten, T. Tröster, and K. Dröder, “Press Hardening
    Integrated Structuring for Hybrid Components,” in <i>Proceedings of 7th International
    Conference Hot Sheet Metal Forming of High-Performance Steel</i>, Lulea, Sweden,
    2019.
  mla: Triebus, Marcel, et al. “Press Hardening Integrated Structuring for Hybrid
    Components.” <i>Proceedings of 7th International Conference Hot Sheet Metal Forming
    of High-Performance Steel</i>, edited by Mats Oldenburg et al., Verlag Wissenschaftliche
    Scripten, 2019.
  short: 'M. Triebus, S. Bienia, T. Marten, T. Tröster, K. Dröder, in: M. Oldenburg,
    J. Hardell, D. Casellas (Eds.), Proceedings of 7th International Conference Hot
    Sheet Metal Forming of High-Performance Steel, Verlag Wissenschaftliche Scripten,
    2019.'
conference:
  end_date: 2019-06-05
  location: Lulea, Sweden
  name: 7th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel
  start_date: 2019-06-02
date_created: 2020-02-24T14:41:21Z
date_updated: 2026-02-16T15:24:39Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
editor:
- first_name: Mats
  full_name: Oldenburg, Mats
  last_name: Oldenburg
- first_name: Jens
  full_name: Hardell, Jens
  last_name: Hardell
- first_name: Daniel
  full_name: Casellas, Daniel
  last_name: Casellas
language:
- iso: eng
publication: Proceedings of 7th International Conference Hot Sheet Metal Forming of
  High-Performance Steel
publication_identifier:
  isbn:
  - 978-3-95735-104-3
publication_status: published
publisher: Verlag Wissenschaftliche Scripten
status: public
title: Press Hardening Integrated Structuring for Hybrid Components
type: conference
user_id: '338'
year: '2019'
...
---
_id: '64186'
author:
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
  orcid: 0009-0001-6433-7839
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Rainer
  full_name: Salomon, Rainer
  last_name: Salomon
citation:
  ama: Marten T, Tröster T, Salomon R. <i>P920 - Einsatz neuartiger Stähle und Generierung
    gradierter Leichtbaustrukturen im Presshärteprozess</i>. Verlag und Vertriebsgesellschaft
    mbH; 2019.
  apa: Marten, T., Tröster, T., &#38; Salomon, R. (2019). <i>P920 - Einsatz neuartiger
    Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>.
    Verlag und Vertriebsgesellschaft mbH.
  bibtex: '@book{Marten_Tröster_Salomon_2019, place={Düsseldorf}, series={Forschung
    für die Praxis}, title={P920 - Einsatz neuartiger Stähle und Generierung gradierter
    Leichtbaustrukturen im Presshärteprozess}, publisher={Verlag und Vertriebsgesellschaft
    mbH}, author={Marten, Thorsten and Tröster, Thomas and Salomon, Rainer}, year={2019},
    collection={Forschung für die Praxis} }'
  chicago: 'Marten, Thorsten, Thomas Tröster, and Rainer Salomon. <i>P920 - Einsatz
    neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>.
    Forschung für die Praxis. Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2019.'
  ieee: 'T. Marten, T. Tröster, and R. Salomon, <i>P920 - Einsatz neuartiger Stähle
    und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf:
    Verlag und Vertriebsgesellschaft mbH, 2019.'
  mla: Marten, Thorsten, et al. <i>P920 - Einsatz neuartiger Stähle und Generierung
    gradierter Leichtbaustrukturen im Presshärteprozess</i>. Verlag und Vertriebsgesellschaft
    mbH, 2019.
  short: T. Marten, T. Tröster, R. Salomon, P920 - Einsatz neuartiger Stähle und Generierung
    gradierter Leichtbaustrukturen im Presshärteprozess, Verlag und Vertriebsgesellschaft
    mbH, Düsseldorf, 2019.
date_created: 2026-02-17T09:38:26Z
date_updated: 2026-02-17T09:50:27Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
place: Düsseldorf
publication_identifier:
  isbn:
  - 978-3-946885-33-7
publication_status: published
publisher: Verlag und Vertriebsgesellschaft mbH
report_number: P920
series_title: Forschung für die Praxis
status: public
title: P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen
  im Presshärteprozess
type: report
user_id: '338'
year: '2019'
...
---
_id: '16791'
author:
- first_name: André
  full_name: Dietrich, André
  last_name: Dietrich
- first_name: Bernard
  full_name: Nacke, Bernard
  last_name: Nacke
- first_name: Florian
  full_name: Pfeifer, Florian
  id: '22717'
  last_name: Pfeifer
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Investigation of geometrical
    discontinuities in blanks for hot sheet metal forming process under the influence
    of induction heating. In: ; 2017.'
  apa: Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., &#38; Tröster, T. (2017).
    Investigation of geometrical discontinuities in blanks for hot sheet metal forming
    process under the influence of induction heating. Presented at the 5th International
    Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam.
  bibtex: '@inproceedings{Dietrich_Nacke_Pfeifer_Marten_Tröster_2017, title={Investigation
    of geometrical discontinuities in blanks for hot sheet metal forming process under
    the influence of induction heating}, author={Dietrich, André and Nacke, Bernard
    and Pfeifer, Florian and Marten, Thorsten and Tröster, Thomas}, year={2017} }'
  chicago: Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas
    Tröster. “Investigation of Geometrical Discontinuities in Blanks for Hot Sheet
    Metal Forming Process under the Influence of Induction Heating,” 2017.
  ieee: A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Investigation
    of geometrical discontinuities in blanks for hot sheet metal forming process under
    the influence of induction heating,” presented at the 5th International Conference
    on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam, 2017.
  mla: Dietrich, André, et al. <i>Investigation of Geometrical Discontinuities in
    Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating</i>.
    2017.
  short: 'A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.'
conference:
  end_date: 2017-06-22
  location: Noordwijkerhout/Amsterdam
  name: 5th International Conference on Steels in Cars and Trucks
  start_date: 2017-06-18
date_created: 2020-04-21T13:31:20Z
date_updated: 2022-01-06T06:52:56Z
department:
- _id: '149'
- _id: '321'
- _id: '9'
language:
- iso: eng
status: public
title: Investigation of geometrical discontinuities in blanks for hot sheet metal
  forming process under the influence of induction heating
type: conference
user_id: '338'
year: '2017'
...
---
_id: '16792'
author:
- first_name: André
  full_name: Dietrich, André
  last_name: Dietrich
- first_name: Bernard
  full_name: Nacke, Bernard
  last_name: Nacke
- first_name: Florian
  full_name: Pfeifer, Florian
  id: '22717'
  last_name: Pfeifer
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Effects of Holes in Blanks
    for Press Hardening Process due to Induction Heating. In: ; 2017.'
  apa: Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., &#38; Tröster, T. (2017).
    Effects of Holes in Blanks for Press Hardening Process due to Induction Heating.
    Presented at the XVIII International UIE-Congress Electrotechnologies for Material
    Processing, Hannover.
  bibtex: '@inproceedings{Dietrich_Nacke_Pfeifer_Marten_Tröster_2017, title={Effects
    of Holes in Blanks for Press Hardening Process due to Induction Heating}, author={Dietrich,
    André and Nacke, Bernard and Pfeifer, Florian and Marten, Thorsten and Tröster,
    Thomas}, year={2017} }'
  chicago: Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas
    Tröster. “Effects of Holes in Blanks for Press Hardening Process Due to Induction
    Heating,” 2017.
  ieee: A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Effects of
    Holes in Blanks for Press Hardening Process due to Induction Heating,” presented
    at the XVIII International UIE-Congress Electrotechnologies for Material Processing,
    Hannover, 2017.
  mla: Dietrich, André, et al. <i>Effects of Holes in Blanks for Press Hardening Process
    Due to Induction Heating</i>. 2017.
  short: 'A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.'
conference:
  end_date: 2017-06-09
  location: Hannover
  name: XVIII International UIE-Congress Electrotechnologies for Material Processing
  start_date: 2017-06-06
date_created: 2020-04-21T13:35:46Z
date_updated: 2022-01-06T06:52:56Z
department:
- _id: '149'
language:
- iso: eng
status: public
title: Effects of Holes in Blanks for Press Hardening Process due to Induction Heating
type: conference
user_id: '22717'
year: '2017'
...
---
_id: '16059'
author:
- first_name: Nathalie
  full_name: Weiß-Borkowski, Nathalie
  last_name: Weiß-Borkowski
- first_name: Juhne
  full_name: Lian, Juhne
  last_name: Lian
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Sebastian
  full_name: Münstermann, Sebastian
  last_name: Münstermann
- first_name: Wolfgang
  full_name: Bleck, Wolfgang
  last_name: Bleck
citation:
  ama: 'Weiß-Borkowski N, Lian J, Marten T, Tröster T, Münstermann S, Bleck W. Forming
    limit curves determined in high-speed Nakajima tests and predicted by a strain
    rate sensitive model. In: <i>Proceedings of The 20th International ESAFORM Conference
    on Material Forming: ESAFORM 2017</i>. ; 2017. doi:<a href="https://doi.org/10.1063/1.5007961">10.1063/1.5007961</a>'
  apa: 'Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S., &#38;
    Bleck, W. (2017). Forming limit curves determined in high-speed Nakajima tests
    and predicted by a strain rate sensitive model. In <i>Proceedings of The 20th
    International ESAFORM Conference on Material Forming: ESAFORM 2017</i>. <a href="https://doi.org/10.1063/1.5007961">https://doi.org/10.1063/1.5007961</a>'
  bibtex: '@inproceedings{Weiß-Borkowski_Lian_Marten_Tröster_Münstermann_Bleck_2017,
    title={Forming limit curves determined in high-speed Nakajima tests and predicted
    by a strain rate sensitive model}, DOI={<a href="https://doi.org/10.1063/1.5007961">10.1063/1.5007961</a>},
    booktitle={Proceedings of The 20th International ESAFORM Conference on Material
    Forming: ESAFORM 2017}, author={Weiß-Borkowski, Nathalie and Lian, Juhne and Marten,
    Thorsten and Tröster, Thomas and Münstermann, Sebastian and Bleck, Wolfgang},
    year={2017} }'
  chicago: 'Weiß-Borkowski, Nathalie, Juhne Lian, Thorsten Marten, Thomas Tröster,
    Sebastian Münstermann, and Wolfgang Bleck. “Forming Limit Curves Determined in
    High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” In
    <i>Proceedings of The 20th International ESAFORM Conference on Material Forming:
    ESAFORM 2017</i>, 2017. <a href="https://doi.org/10.1063/1.5007961">https://doi.org/10.1063/1.5007961</a>.'
  ieee: 'N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, and W.
    Bleck, “Forming limit curves determined in high-speed Nakajima tests and predicted
    by a strain rate sensitive model,” in <i>Proceedings of The 20th International
    ESAFORM Conference on Material Forming: ESAFORM 2017</i>, 2017.'
  mla: 'Weiß-Borkowski, Nathalie, et al. “Forming Limit Curves Determined in High-Speed
    Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” <i>Proceedings
    of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017</i>,
    2017, doi:<a href="https://doi.org/10.1063/1.5007961">10.1063/1.5007961</a>.'
  short: 'N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck,
    in: Proceedings of The 20th International ESAFORM Conference on Material Forming:
    ESAFORM 2017, 2017.'
date_created: 2020-02-24T16:28:58Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1063/1.5007961
language:
- iso: eng
publication: 'Proceedings of The 20th International ESAFORM Conference on Material
  Forming: ESAFORM 2017'
publication_status: published
status: public
title: Forming limit curves determined in high-speed Nakajima tests and predicted
  by a strain rate sensitive model
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16072'
author:
- first_name: N.
  full_name: Weiß Borkowski, N.
  last_name: Weiß Borkowski
- first_name: Alan Adam
  full_name: Camberg, Alan Adam
  id: '60544'
  last_name: Camberg
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
citation:
  ama: 'Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate
    on the instability in high speed cupping tests – Investigation on dual phase steel
    and numerical validation by CRACH. In: ; 2017.'
  apa: Weiß Borkowski, N., Camberg, A. A., Tröster, T., &#38; Marten, T. (2017). Influence
    of strain rate on the instability in high speed cupping tests – Investigation
    on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM
    Conference, Schloss Hohenkammer.
  bibtex: '@inproceedings{Weiß Borkowski_Camberg_Tröster_Marten_2017, title={Influence
    of strain rate on the instability in high speed cupping tests – Investigation
    on dual phase steel and numerical validation by CRACH}, author={Weiß Borkowski,
    N. and Camberg, Alan Adam and Tröster, Thomas and Marten, Thorsten}, year={2017}
    }'
  chicago: Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten.
    “Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation
    on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
  ieee: N. Weiß Borkowski, A. A. Camberg, T. Tröster, and T. Marten, “Influence of
    strain rate on the instability in high speed cupping tests – Investigation on
    dual phase steel and numerical validation by CRACH,” presented at the 4th MATFEM
    Conference, Schloss Hohenkammer, 2017.
  mla: Weiß Borkowski, N., et al. <i>Influence of Strain Rate on the Instability in
    High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation
    by CRACH</i>. 2017.
  short: 'N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.'
conference:
  location: Schloss Hohenkammer
  name: 4th MATFEM Conference
  start_date: 2017-04-25
date_created: 2020-02-25T10:37:14Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influence of strain rate on the instability in high speed cupping tests – Investigation
  on dual phase steel and numerical validation by CRACH
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16073'
author:
- first_name: N.
  full_name: Weiß Borkowski, N.
  last_name: Weiß Borkowski
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: A.
  full_name: Schulz Beenken, A.
  last_name: Schulz Beenken
citation:
  ama: 'Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming
    Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates.
    In: ; 2017.'
  apa: Weiß Borkowski, N., Marten, T., Tröster, T., &#38; Schulz Beenken, A. (2017).
    Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
    Steel at High Strain-Rates. Presented at the 6th International Conference on Hot
    Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA.
  bibtex: '@inproceedings{Weiß Borkowski_Marten_Tröster_Schulz Beenken_2017, title={Analysis
    of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
    High Strain-Rates}, author={Weiß Borkowski, N. and Marten, Thorsten and Tröster,
    Thomas and Schulz Beenken, A.}, year={2017} }'
  chicago: Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken.
    “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
    Steel at High Strain-Rates,” 2017.
  ieee: N. Weiß Borkowski, T. Marten, T. Tröster, and A. Schulz Beenken, “Analysis
    of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
    High Strain-Rates,” presented at the 6th International Conference on Hot Sheet
    Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA, 2017.
  mla: Weiß Borkowski, N., et al. <i>Analysis of the Forming Behaviour of Transition
    Areas of Partial Press-Hardened Steel at High Strain-Rates</i>. 2017.
  short: 'N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.'
conference:
  end_date: 2017-06-07
  location: Atlanta, USA
  name: 6th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel (CHS2 2017)
  start_date: 2017-06-04
date_created: 2020-02-25T10:46:26Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication_identifier:
  isbn:
  - 978-1-935117-66-7
status: public
title: Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
  Steel at High Strain-Rates
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16068'
author:
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
citation:
  ama: Marten T. <i>Erweiterung des Portfolios presshärtbarer Stähle durch gezielte
    Werkstoff- und Prozessmodifikationen</i>. Shaker Verlag; 2017.
  apa: Marten, T. (2017). <i>Erweiterung des Portfolios presshärtbarer Stähle durch
    gezielte Werkstoff- und Prozessmodifikationen</i>. Shaker Verlag.
  bibtex: '@book{Marten_2017, title={Erweiterung des Portfolios presshärtbarer Stähle
    durch gezielte Werkstoff- und Prozessmodifikationen}, publisher={Shaker Verlag},
    author={Marten, Thorsten}, year={2017} }'
  chicago: Marten, Thorsten. <i>Erweiterung des Portfolios presshärtbarer Stähle durch
    gezielte Werkstoff- und Prozessmodifikationen</i>. Shaker Verlag, 2017.
  ieee: T. Marten, <i>Erweiterung des Portfolios presshärtbarer Stähle durch gezielte
    Werkstoff- und Prozessmodifikationen</i>. Shaker Verlag, 2017.
  mla: Marten, Thorsten. <i>Erweiterung des Portfolios presshärtbarer Stähle durch
    gezielte Werkstoff- und Prozessmodifikationen</i>. Shaker Verlag, 2017.
  short: T. Marten, Erweiterung des Portfolios presshärtbarer Stähle durch gezielte
    Werkstoff- und Prozessmodifikationen, Shaker Verlag, 2017.
date_created: 2020-02-24T16:44:36Z
date_updated: 2023-12-20T09:27:52Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
publication_identifier:
  isbn:
  - '9783844055184'
  - '3844055185'
publisher: Shaker Verlag
status: public
title: Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff-
  und Prozessmodifikationen
type: dissertation
user_id: '338'
year: '2017'
...
---
_id: '16132'
author:
- first_name: Nathalie
  full_name: Weiß Borkowski, Nathalie
  last_name: Weiß Borkowski
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Holger
  full_name: Block, Holger
  last_name: Block
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Weiß Borkowski N, Marten T, Block H, Tröster T. Multi-axial Material Testing
    at High Strain Rates in High Speed Cupping Tests. In: ; 2015.'
  apa: Weiß Borkowski, N., Marten, T., Block, H., &#38; Tröster, T. (2015). Multi-axial
    Material Testing at High Strain Rates in High Speed Cupping Tests. Presented at
    the 5th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel, CHS2 2015, Toronto, Canada.
  bibtex: '@inproceedings{Weiß Borkowski_Marten_Block_Tröster_2015, title={Multi-axial
    Material Testing at High Strain Rates in High Speed Cupping Tests}, author={Weiß
    Borkowski, Nathalie and Marten, Thorsten and Block, Holger and Tröster, Thomas},
    year={2015} }'
  chicago: Weiß Borkowski, Nathalie, Thorsten Marten, Holger Block, and Thomas Tröster.
    “Multi-Axial Material Testing at High Strain Rates in High Speed Cupping Tests,”
    2015.
  ieee: N. Weiß Borkowski, T. Marten, H. Block, and T. Tröster, “Multi-axial Material
    Testing at High Strain Rates in High Speed Cupping Tests,” presented at the 5th
    International Conference on Hot Sheet Metal Forming of High-Performance Steel,
    CHS2 2015, Toronto, Canada, 2015.
  mla: Weiß Borkowski, Nathalie, et al. <i>Multi-Axial Material Testing at High Strain
    Rates in High Speed Cupping Tests</i>. 2015.
  short: 'N. Weiß Borkowski, T. Marten, H. Block, T. Tröster, in: 2015.'
conference:
  end_date: 2015-06-03
  location: Toronto, Canada
  name: 5th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel, CHS2 2015
  start_date: 2015-05-31
date_created: 2020-02-27T15:28:10Z
date_updated: 2022-01-06T06:52:44Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '16131'
author:
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
  orcid: 0009-0001-6433-7839
- first_name: Holger
  full_name: Block, Holger
  last_name: Block
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Marten T, Block H, Tröster T. Partial hardening of new press hardenable steels.
    In: Steinhoff K, Oldenburg M, Prakash B, eds. <i>Proceedings of the 5th International
    Conference Hot Sheet Metal Forming of High-Performance Steel</i>. Verlag Wissenschaftliche
    Scripten; 2015.'
  apa: Marten, T., Block, H., &#38; Tröster, T. (2015). Partial hardening of new press
    hardenable steels. In K. Steinhoff, M. Oldenburg, &#38; B. Prakash (Eds.), <i>Proceedings
    of the 5th International Conference Hot Sheet Metal Forming of High-Performance
    Steel</i>. Verlag Wissenschaftliche Scripten.
  bibtex: '@inproceedings{Marten_Block_Tröster_2015, title={Partial hardening of new
    press hardenable steels}, booktitle={Proceedings of the 5th International Conference
    Hot Sheet Metal Forming of High-Performance Steel}, publisher={Verlag Wissenschaftliche
    Scripten}, author={Marten, Thorsten and Block, Holger and Tröster, Thomas}, editor={Steinhoff,
    Kurt and Oldenburg, Mats and Prakash, Braham}, year={2015} }'
  chicago: Marten, Thorsten, Holger Block, and Thomas Tröster. “Partial Hardening
    of New Press Hardenable Steels.” In <i>Proceedings of the 5th International Conference
    Hot Sheet Metal Forming of High-Performance Steel</i>, edited by Kurt Steinhoff,
    Mats Oldenburg, and Braham Prakash. Verlag Wissenschaftliche Scripten, 2015.
  ieee: T. Marten, H. Block, and T. Tröster, “Partial hardening of new press hardenable
    steels,” in <i>Proceedings of the 5th International Conference Hot Sheet Metal
    Forming of High-Performance Steel</i>, Toronto, Canada, 2015.
  mla: Marten, Thorsten, et al. “Partial Hardening of New Press Hardenable Steels.”
    <i>Proceedings of the 5th International Conference Hot Sheet Metal Forming of
    High-Performance Steel</i>, edited by Kurt Steinhoff et al., Verlag Wissenschaftliche
    Scripten, 2015.
  short: 'T. Marten, H. Block, T. Tröster, in: K. Steinhoff, M. Oldenburg, B. Prakash
    (Eds.), Proceedings of the 5th International Conference Hot Sheet Metal Forming
    of High-Performance Steel, Verlag Wissenschaftliche Scripten, 2015.'
conference:
  end_date: 2015-06-03
  location: Toronto, Canada
  name: 5th International Conference on Hot Sheet Metal Forming of High-Performance
    Steel, CHS2 2015
  start_date: 2015-05-31
date_created: 2020-02-27T15:26:31Z
date_updated: 2026-02-16T15:33:50Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
editor:
- first_name: Kurt
  full_name: Steinhoff, Kurt
  last_name: Steinhoff
- first_name: Mats
  full_name: Oldenburg, Mats
  last_name: Oldenburg
- first_name: Braham
  full_name: Prakash, Braham
  last_name: Prakash
language:
- iso: eng
publication: Proceedings of the 5th International Conference Hot Sheet Metal Forming
  of High-Performance Steel
publication_identifier:
  isbn:
  - " \t978-3-95735-023-7"
publication_status: published
publisher: Verlag Wissenschaftliche Scripten
status: public
title: Partial hardening of new press hardenable steels
type: conference
user_id: '338'
year: '2015'
...
---
_id: '16120'
author:
- first_name: Holger
  full_name: Block, Holger
  last_name: Block
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Block H, Marten T, Tröster T. Crash simulation of high strength automotive
    components using advanced failure models. In: ; 2014.'
  apa: Block, H., Marten, T., &#38; Tröster, T. (2014). Crash simulation of high strength
    automotive components using advanced failure models. Presented at the 4th international
    conference on steels in cars and trucks, Braunschweig.
  bibtex: '@inproceedings{Block_Marten_Tröster_2014, title={Crash simulation of high
    strength automotive components using advanced failure models}, author={Block,
    Holger and Marten, Thorsten and Tröster, Thomas}, year={2014} }'
  chicago: Block, Holger, Thorsten Marten, and Thomas Tröster. “Crash Simulation of
    High Strength Automotive Components Using Advanced Failure Models,” 2014.
  ieee: H. Block, T. Marten, and T. Tröster, “Crash simulation of high strength automotive
    components using advanced failure models,” presented at the 4th international
    conference on steels in cars and trucks, Braunschweig, 2014.
  mla: Block, Holger, et al. <i>Crash Simulation of High Strength Automotive Components
    Using Advanced Failure Models</i>. 2014.
  short: 'H. Block, T. Marten, T. Tröster, in: 2014.'
conference:
  end_date: 2014-06-19
  location: Braunschweig
  name: 4th international conference on steels in cars and trucks
  start_date: 2014-06-15
date_created: 2020-02-27T14:58:53Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Crash simulation of high strength automotive components using advanced failure
  models
type: conference
user_id: '72008'
year: '2014'
...