---
_id: '24215'
abstract:
- lang: eng
text: "Wireless Sensor Networks (WSN) consist of large number of distributed sensors
nodes which are able to sense, \r\nread and transmit physical measurements such
as temperature, humidity and pressure over wireless \r\ncommunication links. WSN
nodes are often powered by batteries or can use energy harvesting methods from
\r\nenvironmental energy sources. One of the major challenges in the design of
WSN nodes is the high level of \r\npower dissipation for sensing, processing and
communication. Operating at low-power levels reduces \r\nmaintenance effort for
periodic battery replacement or can even provide unlimited operation by means
of energy \r\nharvesting. Since the communication process is the most power hungry
process, ultra-low-power wireless \r\ncommunication is an enabler for network
applications such as cyber-physical systems, Internet-of-Things and \r\nIndustry
4.0 etc. Our research is based on Wake-up Receivers (WuR) architectures. Each
of the WSN nodes contains a WuR \r\nwhich is always-on, listening for a wake-up
signal from other nodes or the base station, and activating the node \r\nonly
when a wake-up signal is detected. By this scheme the communication with the base
station becomes \r\nasynchronous, real-time and on-demand. Due to the centrally-coordinated,
collision-free communication such \r\nWSNs can be scaled to very large node numbers.
Designing always-on WuR at ultra-low-power dissipation \r\nlevels makes the WSN
nodes very energy efficient because they are only activated when a wake-up-signal
is \r\nreceived. Additionally, the WuR must be robust to noise and co-channel
interference in order to operate safely \r\nin parallel to other wireless systems.
We investigate a novel radio architecture for the WuR using Linear Frequency Modulation
(LFM) and passive \r\nanalog signal processing by means of a Surface Acoustic
Wave (SAW) correlator. The base station sends the \r\nrequired WSN node ID using
LFM signal at 2.4 GHz. The node ID is encoded as chirp up or chirp down signal
\r\nwith chirping bandwidth of 80MHz. On the receiver side, the SAW chirp correlator
demodulates the received \r\nLFM signal while suppressing other wireless signals.
In order to achieve proper demodulation and high Signal-to-Noise Ratio (SNR),
the SAW correlator is designed to behave like a Matched Filter (MF) which boosts
up the \r\nSNR. After that the signal is amplified/detected by baseband amplifier
stage, it is compared with the unique ID \r\nof the node, and the node's Wake
up signal is asserted accordingly. Since the SAW correlator operates \r\ncompletely
passive, the WuR can be implemented in a very energy-efficient way, without the
need to use power \r\nhungry device such as Low Noise Amplifiers (LNA) or down
conversion Local Oscillators (LO)"
author:
- first_name: Saed
full_name: Abughannam, Saed
id: '37628'
last_name: Abughannam
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
citation:
ama: 'Abughannam S, Scheytt C. Low-Power wake up receiver based on Surface Acoustic
Wave Correlator. In: Kleinheubacher Tagung 2017. ; 2017:47.'
apa: Abughannam, S., & Scheytt, C. (2017). Low-Power wake up receiver based
on Surface Acoustic Wave Correlator. Kleinheubacher Tagung 2017, 47.
bibtex: '@inproceedings{Abughannam_Scheytt_2017, place={Miltenberg, Germany}, title={
Low-Power wake up receiver based on Surface Acoustic Wave Correlator}, booktitle={Kleinheubacher
Tagung 2017}, author={Abughannam, Saed and Scheytt, Christoph}, year={2017}, pages={47}
}'
chicago: Abughannam, Saed, and Christoph Scheytt. “ Low-Power Wake up Receiver Based
on Surface Acoustic Wave Correlator.” In Kleinheubacher Tagung 2017, 47.
Miltenberg, Germany, 2017.
ieee: S. Abughannam and C. Scheytt, “ Low-Power wake up receiver based on Surface
Acoustic Wave Correlator,” in Kleinheubacher Tagung 2017, 2017, p. 47.
mla: Abughannam, Saed, and Christoph Scheytt. “ Low-Power Wake up Receiver Based
on Surface Acoustic Wave Correlator.” Kleinheubacher Tagung 2017, 2017,
p. 47.
short: 'S. Abughannam, C. Scheytt, in: Kleinheubacher Tagung 2017, Miltenberg, Germany,
2017, p. 47.'
conference:
end_date: 2017.09.27
start_date: 2017.09.25
date_created: 2021-09-13T08:20:28Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
language:
- iso: eng
page: '47'
place: Miltenberg, Germany
publication: Kleinheubacher Tagung 2017
related_material:
link:
- relation: confirmation
url: https://www.kh2017.de/
status: public
title: ' Low-Power wake up receiver based on Surface Acoustic Wave Correlator'
type: conference
user_id: '15931'
year: '2017'
...
---
_id: '24216'
abstract:
- lang: eng
text: In this article mixed analog/digital signal processing techniques based on
parallel spread-spectrum sequencing (PSSS) and radio frequency (RF) carrier synchronization
for ultra-broadband wireless communication are investigated on system and circuit
level.
author:
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
- first_name: Abdul Rehman
full_name: Javed, Abdul Rehman
last_name: Javed
- first_name: Eswara Rao
full_name: Bammidi, Eswara Rao
last_name: Bammidi
- first_name: Karthik
full_name: KrishneGowda, Karthik
last_name: KrishneGowda
- first_name: Ingmar
full_name: Kallfass, Ingmar
last_name: Kallfass
- first_name: Rolf
full_name: Kraemer, Rolf
last_name: Kraemer
citation:
ama: Scheytt C, Javed AR, Bammidi ER, KrishneGowda K, Kallfass I, Kraemer R. 100
Gbps Wireless System and Circuit Design Using Parallel Spread-Spectrum Sequencing.
Frequenz* Journal of RF-Engineering and Telecommunications. 2017;71(9-10):399-414.
apa: Scheytt, C., Javed, A. R., Bammidi, E. R., KrishneGowda, K., Kallfass, I.,
& Kraemer, R. (2017). 100 Gbps Wireless System and Circuit Design Using Parallel
Spread-Spectrum Sequencing. Frequenz* Journal of RF-Engineering and Telecommunications,
71(9–10), 399–414.
bibtex: '@article{Scheytt_Javed_Bammidi_KrishneGowda_Kallfass_Kraemer_2017, title={100
Gbps Wireless System and Circuit Design Using Parallel Spread-Spectrum Sequencing},
volume={71}, number={9–10}, journal={Frequenz* Journal of RF-Engineering and Telecommunications},
author={Scheytt, Christoph and Javed, Abdul Rehman and Bammidi, Eswara Rao and
KrishneGowda, Karthik and Kallfass, Ingmar and Kraemer, Rolf}, year={2017}, pages={399–414}
}'
chicago: 'Scheytt, Christoph, Abdul Rehman Javed, Eswara Rao Bammidi, Karthik KrishneGowda,
Ingmar Kallfass, and Rolf Kraemer. “100 Gbps Wireless System and Circuit Design
Using Parallel Spread-Spectrum Sequencing.” Frequenz* Journal of RF-Engineering
and Telecommunications 71, no. 9–10 (2017): 399–414.'
ieee: C. Scheytt, A. R. Javed, E. R. Bammidi, K. KrishneGowda, I. Kallfass, and
R. Kraemer, “100 Gbps Wireless System and Circuit Design Using Parallel Spread-Spectrum
Sequencing,” Frequenz* Journal of RF-Engineering and Telecommunications,
vol. 71, no. 9–10, pp. 399–414, 2017.
mla: Scheytt, Christoph, et al. “100 Gbps Wireless System and Circuit Design Using
Parallel Spread-Spectrum Sequencing.” Frequenz* Journal of RF-Engineering and
Telecommunications, vol. 71, no. 9–10, 2017, pp. 399–414.
short: C. Scheytt, A.R. Javed, E.R. Bammidi, K. KrishneGowda, I. Kallfass, R. Kraemer,
Frequenz* Journal of RF-Engineering and Telecommunications 71 (2017) 399–414.
date_created: 2021-09-13T08:20:30Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
issue: 9-10
language:
- iso: eng
page: 399-414
publication: Frequenz* Journal of RF-Engineering and Telecommunications
related_material:
link:
- relation: confirmation
url: https://doi.org/10.1515/freq-2017-0174
status: public
title: 100 Gbps Wireless System and Circuit Design Using Parallel Spread-Spectrum
Sequencing
type: journal_article
user_id: '15931'
volume: '71 '
year: '2017'
...
---
_id: '24217'
abstract:
- lang: eng
text: Parallel Sequence Spread Spectrum (PSSS) is a physical layer (PHY) baseband
technology that is well suited for mixed-signal transceiver implementation for
high data rate wireless communication systems. Mixed signal baseband realization
allows for easier implementation of the channel equalization function and eliminates
the need for high speed data converters. System design and architecture of a mixed
signal baseband processor for 100 Gbps wireless communication is described that
reduces the implementation complexity and results in a consequent reduction in
power dissipation and chip area. An ultra-broadband analog correlator consisting
of a four-quadrant multiplier and a fast resettable integrator using only NPN
transistors was designed, fabricated, and measured. The correlator circuit is
the core component of the receiver baseband. To the best knowledge of the authors,
it is the fastest correlator circuit published so far.
author:
- first_name: Abdul Rehman
full_name: Javed, Abdul Rehman
last_name: Javed
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
- first_name: KrishneGowda
full_name: Karthik, KrishneGowda
last_name: Karthik
- first_name: Roland
full_name: Kramer, Roland
last_name: Kramer
citation:
ama: 'Javed AR, Scheytt C, Karthik K, Kramer R. System design of a mixed signal
PSSS transdeiver using a linear ultra-broadband analog correlator for the receiver
baseband designed in 130nm SiGe BiCMOS technology. In: IEEE EUROCON 2017-17th
International Conference on Smart Technologies. 17th International Conference
on Smart Technologies. ; 2017:228-233. doi:10.1109/EUROCON.2017.8011110'
apa: Javed, A. R., Scheytt, C., Karthik, K., & Kramer, R. (2017). System design
of a mixed signal PSSS transdeiver using a linear ultra-broadband analog correlator
for the receiver baseband designed in 130nm SiGe BiCMOS technology. IEEE EUROCON
2017-17th International Conference on Smart Technologies, 228–233. https://doi.org/10.1109/EUROCON.2017.8011110
bibtex: '@inproceedings{Javed_Scheytt_Karthik_Kramer_2017, series={17th International
Conference on Smart Technologies}, title={System design of a mixed signal PSSS
transdeiver using a linear ultra-broadband analog correlator for the receiver
baseband designed in 130nm SiGe BiCMOS technology}, DOI={10.1109/EUROCON.2017.8011110},
booktitle={IEEE EUROCON 2017-17th International Conference on Smart Technologies},
author={Javed, Abdul Rehman and Scheytt, Christoph and Karthik, KrishneGowda and
Kramer, Roland}, year={2017}, pages={228–233}, collection={17th International
Conference on Smart Technologies} }'
chicago: Javed, Abdul Rehman, Christoph Scheytt, KrishneGowda Karthik, and Roland
Kramer. “System Design of a Mixed Signal PSSS Transdeiver Using a Linear Ultra-Broadband
Analog Correlator for the Receiver Baseband Designed in 130nm SiGe BiCMOS Technology.”
In IEEE EUROCON 2017-17th International Conference on Smart Technologies,
228–33. 17th International Conference on Smart Technologies, 2017. https://doi.org/10.1109/EUROCON.2017.8011110.
ieee: 'A. R. Javed, C. Scheytt, K. Karthik, and R. Kramer, “System design of a mixed
signal PSSS transdeiver using a linear ultra-broadband analog correlator for the
receiver baseband designed in 130nm SiGe BiCMOS technology,” in IEEE EUROCON
2017-17th International Conference on Smart Technologies, 2017, pp. 228–233,
doi: 10.1109/EUROCON.2017.8011110.'
mla: Javed, Abdul Rehman, et al. “System Design of a Mixed Signal PSSS Transdeiver
Using a Linear Ultra-Broadband Analog Correlator for the Receiver Baseband Designed
in 130nm SiGe BiCMOS Technology.” IEEE EUROCON 2017-17th International Conference
on Smart Technologies, 2017, pp. 228–33, doi:10.1109/EUROCON.2017.8011110.
short: 'A.R. Javed, C. Scheytt, K. Karthik, R. Kramer, in: IEEE EUROCON 2017-17th
International Conference on Smart Technologies, 2017, pp. 228–233.'
date_created: 2021-09-13T08:20:31Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
doi: 10.1109/EUROCON.2017.8011110
language:
- iso: eng
page: 228-233
publication: IEEE EUROCON 2017-17th International Conference on Smart Technologies
publication_identifier:
eisbn:
- 978-1-5090-3843-5
isbn:
- 978-1-5090-3844-2
related_material:
link:
- relation: confirmation
url: https://ieeexplore.ieee.org/document/8011110
series_title: 17th International Conference on Smart Technologies
status: public
title: System design of a mixed signal PSSS transdeiver using a linear ultra-broadband
analog correlator for the receiver baseband designed in 130nm SiGe BiCMOS technology
type: conference
user_id: '15931'
year: '2017'
...
---
_id: '24218'
abstract:
- lang: ger
text: ' Die Erfindung betrifft eine Folge-Halte-Schaltung zum Konvertieren eines
analogen Eingangssignals in ein digitales Ausgangssignal mit einer Haltekapazitätseinheit,
mit einer Spannungsverstärkereinheit enthaltend einen Eingang, an dem ein analoges
Eingangsspannungssignal anlegbar ist, und enthaltend einen Ausgang, der mit der
Haltekapazitätseinheit verbunden ist, mit einer Arbeitspunkteinstelleinheit zur
Steuerung der Spannungsverstärkereinheit, wobei an einem Eingang der Arbeitspunkteinstelleinheit
ein Steuersignal anliegt, so dass in einem Folgebetrieb der Folge-Halte-Schaltung
eine an dem Ausgang der Spannungsverstärkereinheit anliegendes Ausgangssignal
einen an den Eingang der Spannungsverstärkereinheit anliegendes Eingangssignal
folgt, und in einem Haltebetrieb der Folge-Halte-Schaltung das Ausgangssignal
der Spannungsverstärkereinheit konstant ist, mit einer Taktsignalquelle zur Erzeugung
einer Folge von einem Eingang der Arbeitspunkteinstelleinheit anliegenden Taktsignalen,
wobei die Arbeitspunkteinstelleinheit elektrooptische Mittel zur Erzeugung des
Steuersignals aufweist, dass die Taktsignalquelle als eine optische Taktsignalquelle
ausgebildet ist, so dass als Taktsignal eine optische Impulsfolge mit hohen und
tiefen Taktsignalen an den Eingang der Arbeitspunkteinstelleinheit anliegt. '
application_date: 17.07.2017
application_number: '102017116001'
author:
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
citation:
ama: Scheytt C. Folge-Halte-Schaltung . Published online 2017.
apa: Scheytt, C. (2017). Folge-Halte-Schaltung .
bibtex: '@article{Scheytt_2017, title={Folge-Halte-Schaltung }, author={Scheytt,
Christoph}, year={2017} }'
chicago: Scheytt, Christoph. “Folge-Halte-Schaltung ,” 2017.
ieee: C. Scheytt, “Folge-Halte-Schaltung .” 2017.
mla: Scheytt, Christoph. Folge-Halte-Schaltung . 2017.
short: C. Scheytt, (2017).
date_created: 2021-09-13T08:20:32Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
ipc: H03K3/42
ipn: DE102017116001A1
publication_date: 17.01.2019
related_material:
link:
- relation: confirmation
url: https://depatisnet.dpma.de/DepatisNet/depatisnet?action=bibdat&docid=DE102017116001A1
status: public
title: 'Folge-Halte-Schaltung '
type: patent
user_id: '15931'
year: '2017'
...
---
_id: '24220'
author:
- first_name: Peer
full_name: Adelt, Peer
id: '5603'
last_name: Adelt
- first_name: Bastian
full_name: Koppelmann, Bastian
id: '25260'
last_name: Koppelmann
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Daniel
full_name: Mueller-Gritschneder, Daniel
last_name: Mueller-Gritschneder
- first_name: Bernd
full_name: Kleinjohann, Bernd
last_name: Kleinjohann
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
citation:
ama: 'Adelt P, Koppelmann B, Müller W, Mueller-Gritschneder D, Kleinjohann B, Scheytt
C. Automatisierte Fehlerinjektion zur Entwicklung sicherer Mikrocontrolleranwendungen
auf der Basis virtueller Plattformen. In: Tagungsband des Wissenschaftsforums
Intelligente Technische Systeme. Verlagsschriftenreihe des Heinz Nixdorf Instituts;
2017. doi:10.17619/UNIPB/1-93'
apa: Adelt, P., Koppelmann, B., Müller, W., Mueller-Gritschneder, D., Kleinjohann,
B., & Scheytt, C. (2017). Automatisierte Fehlerinjektion zur Entwicklung sicherer
Mikrocontrolleranwendungen auf der Basis virtueller Plattformen. Tagungsband
des Wissenschaftsforums Intelligente Technische Systeme. https://doi.org/10.17619/UNIPB/1-93
bibtex: '@inproceedings{Adelt_Koppelmann_Müller_Mueller-Gritschneder_Kleinjohann_Scheytt_2017,
place={Germany, Paderborn}, title={Automatisierte Fehlerinjektion zur Entwicklung
sicherer Mikrocontrolleranwendungen auf der Basis virtueller Plattformen}, DOI={10.17619/UNIPB/1-93}, booktitle={Tagungsband
des Wissenschaftsforums Intelligente Technische Systeme}, publisher={Verlagsschriftenreihe
des Heinz Nixdorf Instituts}, author={Adelt, Peer and Koppelmann, Bastian and
Müller, Wolfgang and Mueller-Gritschneder, Daniel and Kleinjohann, Bernd and Scheytt,
Christoph}, year={2017} }'
chicago: 'Adelt, Peer, Bastian Koppelmann, Wolfgang Müller, Daniel Mueller-Gritschneder,
Bernd Kleinjohann, and Christoph Scheytt. “Automatisierte Fehlerinjektion zur
Entwicklung sicherer Mikrocontrolleranwendungen auf der Basis virtueller Plattformen.”
In Tagungsband des Wissenschaftsforums Intelligente Technische Systeme.
Germany, Paderborn: Verlagsschriftenreihe des Heinz Nixdorf Instituts, 2017. https://doi.org/10.17619/UNIPB/1-93.'
ieee: 'P. Adelt, B. Koppelmann, W. Müller, D. Mueller-Gritschneder, B. Kleinjohann,
and C. Scheytt, “Automatisierte Fehlerinjektion zur Entwicklung sicherer Mikrocontrolleranwendungen
auf der Basis virtueller Plattformen,” 2017, doi: 10.17619/UNIPB/1-93.'
mla: Adelt, Peer, et al. “Automatisierte Fehlerinjektion zur Entwicklung sicherer
Mikrocontrolleranwendungen auf der Basis virtueller Plattformen.” Tagungsband
des Wissenschaftsforums Intelligente Technische Systeme, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, 2017, doi:10.17619/UNIPB/1-93.
short: 'P. Adelt, B. Koppelmann, W. Müller, D. Mueller-Gritschneder, B. Kleinjohann,
C. Scheytt, in: Tagungsband des Wissenschaftsforums Intelligente Technische Systeme,
Verlagsschriftenreihe des Heinz Nixdorf Instituts, Germany, Paderborn, 2017.'
date_created: 2021-09-13T08:20:35Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
doi: 10.17619/UNIPB/1-93
language:
- iso: ger
place: Germany, Paderborn
publication: Tagungsband des Wissenschaftsforums Intelligente Technische Systeme
publication_identifier:
isbn:
- 978-3-942647-88-5
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts
related_material:
link:
- relation: confirmation
url: https://digital.ub.uni-paderborn.de/hs/content/titleinfo/2436759
status: public
title: Automatisierte Fehlerinjektion zur Entwicklung sicherer Mikrocontrolleranwendungen
auf der Basis virtueller Plattformen
type: conference
user_id: '15931'
year: '2017'
...
---
_id: '24221'
abstract:
- lang: ger
text: Das Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) legt am
11. und 12. Mai 2017 in Paderborn den Schwerpunkt auf die Grundlagen und die Entwicklung
intelligenter technischer Systeme im Kontext Industrie 4.0. Etwa 40 begutachtete
hochkarätige Beiträge geben einen Überblick über Forschungsfelder, Technologien
und Anwendungen. Die Veranstaltung bietet den Teilnehmerinnen und Teilnehmern
eine ausgezeichnete Bühne für den Erfahrungsaustausch auf dem Weg in die Digitalisierung
von Produkten und Produktionssystemen. »Das Besondere ist der Dialog von Hochschulforschung
und industrieller Entwicklung, also das Aufeinandertreffen von »Science-Push«
und »Application-Pull«. Die Beiträge spiegeln die hervorragende Vernetzung in
der Region OWL und darüber hinaus wider«, sagt Veranstalter Prof. Jürgen Gausemeier
(Heinz Nixdorf Institut, Universität Paderborn).
author:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Eric
full_name: Bodden, Eric
id: '59256'
last_name: Bodden
orcid: 0000-0003-3470-3647
- first_name: Falko
full_name: Dressler, Falko
id: '48097'
last_name: Dressler
orcid: 0000-0002-1989-1750
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Gausemeier J, Bodden E, Dressler F, et al. Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys). Vol 369. Verlagsschriftenreihe des Heinz Nixdorf
Instituts, Paderborn; 2017. doi:10.17619/UNIPB/1-93
apa: Gausemeier, J., Bodden, E., Dressler, F., Dumitrescu, R., Meyer auf der Heide,
F., Scheytt, C., & Trächtler, A. (2017). Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys) (Vol. 369). Verlagsschriftenreihe des Heinz
Nixdorf Instituts, Paderborn. https://doi.org/10.17619/UNIPB/1-93
bibtex: '@book{Gausemeier_Bodden_Dressler_Dumitrescu_Meyer auf der Heide_Scheytt_Trächtler_2017,
series={369}, title={Wissenschaftsforum Intelligente Technische Systeme (WInTeSys)},
volume={369}, DOI={10.17619/UNIPB/1-93},
publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, author={Gausemeier,
Jürgen and Bodden, Eric and Dressler, Falko and Dumitrescu, Roman and Meyer auf
der Heide, Friedhelm and Scheytt, Christoph and Trächtler, Ansgar}, year={2017},
collection={369} }'
chicago: Gausemeier, Jürgen, Eric Bodden, Falko Dressler, Roman Dumitrescu, Friedhelm
Meyer auf der Heide, Christoph Scheytt, and Ansgar Trächtler. Wissenschaftsforum
Intelligente Technische Systeme (WInTeSys). Vol. 369. 369. Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2017. https://doi.org/10.17619/UNIPB/1-93.
ieee: J. Gausemeier et al., Wissenschaftsforum Intelligente Technische
Systeme (WInTeSys), vol. 369. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn, 2017.
mla: Gausemeier, Jürgen, et al. Wissenschaftsforum Intelligente Technische Systeme
(WInTeSys). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
2017, doi:10.17619/UNIPB/1-93.
short: J. Gausemeier, E. Bodden, F. Dressler, R. Dumitrescu, F. Meyer auf der Heide,
C. Scheytt, A. Trächtler, Wissenschaftsforum Intelligente Technische Systeme (WInTeSys),
Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2017.
date_created: 2021-09-13T08:20:36Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
doi: 10.17619/UNIPB/1-93
intvolume: ' 369'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-942647-88-5
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
related_material:
link:
- relation: confirmation
url: https://digital.ub.uni-paderborn.de/hs/content/titleinfo/2436759
series_title: '369'
status: public
title: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys)
type: book
user_id: '15931'
volume: 369
year: '2017'
...
---
_id: '24223'
abstract:
- lang: eng
text: "This paper presents the design flow of using \r\nsampling technique for fault
injection on sche-\r\nmatic level. The parameters used in the docu-\r\nment to
calculate the likelihood could be modi-\r\nfied by using more realistic data from
the fab. \r\nWith the help of the fault simulator, the whole \r\ndesign flow of
the fault effect simulation can be \r\nrealized automatically."
author:
- first_name: Liang
full_name: Wu, Liang
id: '30401'
last_name: Wu
- first_name: Saed
full_name: Abughannam, Saed
id: '37628'
last_name: Abughannam
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
- first_name: Wolfgang
full_name: Ecker, Wolfgang
last_name: Ecker
citation:
ama: 'Wu L, Abughannam S, Müller W, Scheytt C, Ecker W. SPICE-Level Fault Injection
with Likelihood Weighted Random Sampling - A Case Study. In: 2nd Workshop on
Resiliency in Embedded Electronic Systems (REES). ; 2017:68.'
apa: Wu, L., Abughannam, S., Müller, W., Scheytt, C., & Ecker, W. (2017). SPICE-Level
Fault Injection with Likelihood Weighted Random Sampling - A Case Study. 2nd
Workshop on Resiliency in Embedded Electronic Systems (REES), 68.
bibtex: '@inproceedings{Wu_Abughannam_Müller_Scheytt_Ecker_2017, place={Lausanne,
Switzerland}, title={SPICE-Level Fault Injection with Likelihood Weighted Random
Sampling - A Case Study}, booktitle={2nd Workshop on Resiliency in Embedded Electronic
Systems (REES)}, author={Wu, Liang and Abughannam, Saed and Müller, Wolfgang and
Scheytt, Christoph and Ecker, Wolfgang}, year={2017}, pages={68} }'
chicago: Wu, Liang, Saed Abughannam, Wolfgang Müller, Christoph Scheytt, and Wolfgang
Ecker. “SPICE-Level Fault Injection with Likelihood Weighted Random Sampling -
A Case Study.” In 2nd Workshop on Resiliency in Embedded Electronic Systems
(REES), 68. Lausanne, Switzerland, 2017.
ieee: L. Wu, S. Abughannam, W. Müller, C. Scheytt, and W. Ecker, “SPICE-Level Fault
Injection with Likelihood Weighted Random Sampling - A Case Study,” in 2nd
Workshop on Resiliency in Embedded Electronic Systems (REES), 2017, p. 68.
mla: Wu, Liang, et al. “SPICE-Level Fault Injection with Likelihood Weighted Random
Sampling - A Case Study.” 2nd Workshop on Resiliency in Embedded Electronic
Systems (REES), 2017, p. 68.
short: 'L. Wu, S. Abughannam, W. Müller, C. Scheytt, W. Ecker, in: 2nd Workshop
on Resiliency in Embedded Electronic Systems (REES), Lausanne, Switzerland, 2017,
p. 68.'
date_created: 2021-09-13T08:20:39Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
language:
- iso: eng
page: '68'
place: Lausanne, Switzerland
publication: 2nd Workshop on Resiliency in Embedded Electronic Systems (REES)
related_material:
link:
- relation: confirmation
url: https://past.date-conference.com/date17/conference/workshop-w05
status: public
title: SPICE-Level Fault Injection with Likelihood Weighted Random Sampling - A Case
Study
type: conference
user_id: '15931'
year: '2017'
...
---
_id: '24224'
author:
- first_name: Peer
full_name: Adelt, Peer
id: '5603'
last_name: Adelt
- first_name: Bastian
full_name: Koppelmann, Bastian
id: '25260'
last_name: Koppelmann
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Bernd
full_name: Kleinjohann, Bernd
last_name: Kleinjohann
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
citation:
ama: 'Adelt P, Koppelmann B, Müller W, Kleinjohann B, Scheytt C. ANALISA - A Tool
for Static Instruction Set Analysis. In: Design Automation and Testing in Europe
(DATE), University Booth Interactive Presentation. ; 2017.'
apa: Adelt, P., Koppelmann, B., Müller, W., Kleinjohann, B., & Scheytt, C. (2017).
ANALISA - A Tool for Static Instruction Set Analysis. Design Automation and
Testing in Europe (DATE), University Booth Interactive Presentation.
bibtex: '@inproceedings{Adelt_Koppelmann_Müller_Kleinjohann_Scheytt_2017, place={Lausanne,
CH}, title={ANALISA - A Tool for Static Instruction Set Analysis}, booktitle={Design
Automation and Testing in Europe (DATE), University Booth Interactive Presentation},
author={Adelt, Peer and Koppelmann, Bastian and Müller, Wolfgang and Kleinjohann,
Bernd and Scheytt, Christoph}, year={2017} }'
chicago: Adelt, Peer, Bastian Koppelmann, Wolfgang Müller, Bernd Kleinjohann, and
Christoph Scheytt. “ANALISA - A Tool for Static Instruction Set Analysis.” In
Design Automation and Testing in Europe (DATE), University Booth Interactive
Presentation. Lausanne, CH, 2017.
ieee: P. Adelt, B. Koppelmann, W. Müller, B. Kleinjohann, and C. Scheytt, “ANALISA
- A Tool for Static Instruction Set Analysis,” 2017.
mla: Adelt, Peer, et al. “ANALISA - A Tool for Static Instruction Set Analysis.”
Design Automation and Testing in Europe (DATE), University Booth Interactive
Presentation, 2017.
short: 'P. Adelt, B. Koppelmann, W. Müller, B. Kleinjohann, C. Scheytt, in: Design
Automation and Testing in Europe (DATE), University Booth Interactive Presentation,
Lausanne, CH, 2017.'
conference:
end_date: 2017.03.31
start_date: 2017.03.27
date_created: 2021-09-13T08:20:40Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
language:
- iso: eng
place: Lausanne, CH
publication: Design Automation and Testing in Europe (DATE), University Booth Interactive
Presentation
related_material:
link:
- relation: confirmation
url: https://www.date-conference.com/content/date-2017-call-papers
status: public
title: ANALISA - A Tool for Static Instruction Set Analysis
type: conference
user_id: '15931'
year: '2017'
...
---
_id: '24225'
author:
- first_name: Peer
full_name: Adelt, Peer
id: '5603'
last_name: Adelt
- first_name: Bastian
full_name: Koppelmann, Bastian
id: '25260'
last_name: Koppelmann
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Bernd
full_name: Kleinjohann, Bernd
last_name: Kleinjohann
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
citation:
ama: 'Adelt P, Koppelmann B, Müller W, Kleinjohann B, Scheytt C. An Automatic Injection
Framework for Safety Assessements of Embedded Software Binaries. In: 2nd Workshop
on Resiliency in Embedded Electronic Systems (REES) . ; 2017:44.'
apa: Adelt, P., Koppelmann, B., Müller, W., Kleinjohann, B., & Scheytt, C. (2017).
An Automatic Injection Framework for Safety Assessements of Embedded Software
Binaries. 2nd Workshop on Resiliency in Embedded Electronic Systems (REES)
, 44.
bibtex: '@inproceedings{Adelt_Koppelmann_Müller_Kleinjohann_Scheytt_2017, place={Lausanne,
Switzerland}, title={An Automatic Injection Framework for Safety Assessements
of Embedded Software Binaries}, booktitle={2nd Workshop on Resiliency in Embedded
Electronic Systems (REES) }, author={Adelt, Peer and Koppelmann, Bastian and Müller,
Wolfgang and Kleinjohann, Bernd and Scheytt, Christoph}, year={2017}, pages={44}
}'
chicago: Adelt, Peer, Bastian Koppelmann, Wolfgang Müller, Bernd Kleinjohann, and
Christoph Scheytt. “An Automatic Injection Framework for Safety Assessements of
Embedded Software Binaries.” In 2nd Workshop on Resiliency in Embedded Electronic
Systems (REES) , 44. Lausanne, Switzerland, 2017.
ieee: P. Adelt, B. Koppelmann, W. Müller, B. Kleinjohann, and C. Scheytt, “An Automatic
Injection Framework for Safety Assessements of Embedded Software Binaries,” in
2nd Workshop on Resiliency in Embedded Electronic Systems (REES) , 2017,
p. 44.
mla: Adelt, Peer, et al. “An Automatic Injection Framework for Safety Assessements
of Embedded Software Binaries.” 2nd Workshop on Resiliency in Embedded Electronic
Systems (REES) , 2017, p. 44.
short: 'P. Adelt, B. Koppelmann, W. Müller, B. Kleinjohann, C. Scheytt, in: 2nd
Workshop on Resiliency in Embedded Electronic Systems (REES) , Lausanne, Switzerland,
2017, p. 44.'
date_created: 2021-09-13T08:20:41Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
language:
- iso: eng
page: '44'
place: Lausanne, Switzerland
publication: '2nd Workshop on Resiliency in Embedded Electronic Systems (REES) '
related_material:
link:
- relation: confirmation
url: https://www.edacentrum.de/rees/program
status: public
title: An Automatic Injection Framework for Safety Assessements of Embedded Software
Binaries
type: conference
user_id: '15931'
year: '2017'
...
---
_id: '24227'
abstract:
- lang: eng
text: This work describes an electrical interferometer for contactless permittivity
measurements working at 120 GHz. It was fabricated in a 130 nm SiGe process featuring
an ft and fmax of 240 and 330 GHz. The on-chip system contains a 120 GHz VCO with
a tuning range of 7 GHz featuring a divide-by-64 circuit to enable external PLL
operation. The subsequent buffer provides 7 dBm of output power at 120 GHz. Additionally,
the IC contains high-precision and high-resolution phase shifters based on a slow-wave
transmission line approach with digital control for direct readout ability. A
120 GHz LNA with 17 dB gain and a power detector to provide DC output signals
were realized on chip. It enables sample emulation capability by phase shift inducement
in the measurement as well as a reference transmission line. In terms of phase
detection, the system shows a sensitivity of 907.36 MHz/°.
author:
- first_name: Jan
full_name: Wessel, Jan
last_name: Wessel
- first_name: Klaus
full_name: Schmalz, Klaus
last_name: Schmalz
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
- first_name: Dietmar
full_name: Kissinger, Dietmar
last_name: Kissinger
citation:
ama: Wessel J, Schmalz K, Scheytt C, Kissinger D. A 120-GHz Electrical Interferometer
for Contactless Permittivity Measurements With Direct Digital Read-Out. IEEE
Microwave and Wireless Components Letters. 2017;27(2):198-200. doi:10.1109/LMWC.2017.2649384
apa: Wessel, J., Schmalz, K., Scheytt, C., & Kissinger, D. (2017). A 120-GHz
Electrical Interferometer for Contactless Permittivity Measurements With Direct
Digital Read-Out. IEEE Microwave and Wireless Components Letters, 27(2),
198–200. https://doi.org/10.1109/LMWC.2017.2649384
bibtex: '@article{Wessel_Schmalz_Scheytt_Kissinger_2017, title={A 120-GHz Electrical
Interferometer for Contactless Permittivity Measurements With Direct Digital Read-Out},
volume={27}, DOI={10.1109/LMWC.2017.2649384},
number={2}, journal={IEEE Microwave and Wireless Components Letters}, author={Wessel,
Jan and Schmalz, Klaus and Scheytt, Christoph and Kissinger, Dietmar}, year={2017},
pages={198–200} }'
chicago: 'Wessel, Jan, Klaus Schmalz, Christoph Scheytt, and Dietmar Kissinger.
“A 120-GHz Electrical Interferometer for Contactless Permittivity Measurements
With Direct Digital Read-Out.” IEEE Microwave and Wireless Components Letters
27, no. 2 (2017): 198–200. https://doi.org/10.1109/LMWC.2017.2649384.'
ieee: 'J. Wessel, K. Schmalz, C. Scheytt, and D. Kissinger, “A 120-GHz Electrical
Interferometer for Contactless Permittivity Measurements With Direct Digital Read-Out,”
IEEE Microwave and Wireless Components Letters, vol. 27, no. 2, pp. 198–200,
2017, doi: 10.1109/LMWC.2017.2649384.'
mla: Wessel, Jan, et al. “A 120-GHz Electrical Interferometer for Contactless Permittivity
Measurements With Direct Digital Read-Out.” IEEE Microwave and Wireless Components
Letters, vol. 27, no. 2, 2017, pp. 198–200, doi:10.1109/LMWC.2017.2649384.
short: J. Wessel, K. Schmalz, C. Scheytt, D. Kissinger, IEEE Microwave and Wireless
Components Letters 27 (2017) 198–200.
date_created: 2021-09-13T08:20:44Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '58'
doi: 10.1109/LMWC.2017.2649384
intvolume: ' 27'
issue: '2'
language:
- iso: eng
page: 198-200
publication: IEEE Microwave and Wireless Components Letters
publication_identifier:
eissn:
- 1558-1764
related_material:
link:
- relation: confirmation
url: https://ieeexplore.ieee.org/document/7845690
status: public
title: A 120-GHz Electrical Interferometer for Contactless Permittivity Measurements
With Direct Digital Read-Out
type: journal_article
user_id: '15931'
volume: 27
year: '2017'
...
---
_id: '27415'
citation:
ama: Gausemeier J, Bodden E, Dressler F, et al., eds. Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys). , Band 369. Vol 369. Verlagsschriftenreihe
des Heinz Nixdorf Instituts; 2017.
apa: Gausemeier, J., Bodden, E., Dressler, F., Dumitrescu, R., Meyer auf der Heide,
F., Scheytt, C., & Trächtler, A. (Eds.). (2017). Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys). , Band 369 (Vol. 369). Verlagsschriftenreihe
des Heinz Nixdorf Instituts.
bibtex: '@book{Gausemeier_Bodden_Dressler_Dumitrescu_Meyer auf der Heide_Scheytt_Trächtler_2017,
place={Paderborn}, title={Wissenschaftsforum Intelligente Technische Systeme (WInTeSys).
, Band 369}, volume={369}, publisher={Verlagsschriftenreihe des Heinz Nixdorf
Instituts}, year={2017} }'
chicago: 'Gausemeier, Jürgen, Eric Bodden, Falko Dressler, Roman Dumitrescu, Friedhelm
Meyer auf der Heide, Christoph Scheytt, and Ansgar Trächtler, eds. Wissenschaftsforum
Intelligente Technische Systeme (WInTeSys). , Band 369. Vol. 369. Paderborn:
Verlagsschriftenreihe des Heinz Nixdorf Instituts, 2017.'
ieee: 'J. Gausemeier et al., Eds., Wissenschaftsforum Intelligente Technische
Systeme (WInTeSys). , Band 369, vol. 369. Paderborn: Verlagsschriftenreihe
des Heinz Nixdorf Instituts, 2017.'
mla: Gausemeier, Jürgen, et al., editors. Wissenschaftsforum Intelligente Technische
Systeme (WInTeSys). , Band 369. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
2017.
short: J. Gausemeier, E. Bodden, F. Dressler, R. Dumitrescu, F. Meyer auf der Heide,
C. Scheytt, A. Trächtler, eds., Wissenschaftsforum Intelligente Technische Systeme
(WInTeSys). , Band 369, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
2017.
date_created: 2021-11-15T08:34:31Z
date_updated: 2022-01-06T06:57:39Z
department:
- _id: '676'
editor:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Eric
full_name: Bodden, Eric
id: '59256'
last_name: Bodden
orcid: 0000-0003-3470-3647
- first_name: Falko
full_name: Dressler, Falko
id: '48097'
last_name: Dressler
orcid: 0000-0002-1989-1750
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
intvolume: ' 369'
language:
- iso: ger
place: Paderborn
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts
status: public
title: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys). , Band 369
type: book_editor
user_id: '21240'
volume: 369
year: '2017'
...
---
_id: '24211'
abstract:
- lang: eng
text: A fully-differential receiver structure for fiber links is presented, in which
the photodiode (PD) is DC-coupled to the transimpedance amplifier (TIA) and biased
through the feedback resistors. The biasing voltage is defined by the internal
structure of the input stage. Different options are suggested that allow to adjust
PD biasing. Multiple architecture variants are proposed, that were implemented
in 0.25μm SiGe BiCMOS technology. Initial measurement results are reported, proving
the feasibility of the concept. A 25Gbps hybrid receiver designed to comply with
a specific standard is also presented, featuring large horizontal eye opening
of 800mV, OMA of -15dBm at BER of 10 -6 and power dissipation of 330mW from a
single 3.3V power supply.
author:
- first_name: Sergiy
full_name: Gudyriev, Sergiy
last_name: Gudyriev
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
orcid: https://orcid.org/0000-0002-5950-6618
- first_name: Lei
full_name: Yan, Lei
last_name: Yan
- first_name: Meuer
full_name: Christian, Meuer
last_name: Christian
- first_name: Lars
full_name: Zimmermann, Lars
last_name: Zimmermann
citation:
ama: Gudyriev S, Scheytt C, Yan L, Christian M, Zimmermann L. Fully-differential,
DC-coupled, Self-biased, Monolithically-integrated Optical Receiver in 0.25μm
Photonic BiCMOS Technology for Multi-channel Fiber Links. IEEE Bipolar/BiCMOS
Circuits and Technology Meeting. Published online 2017. doi:10.1109/BCTM.2017.8112922
apa: Gudyriev, S., Scheytt, C., Yan, L., Christian, M., & Zimmermann, L. (2017).
Fully-differential, DC-coupled, Self-biased, Monolithically-integrated Optical
Receiver in 0.25μm Photonic BiCMOS Technology for Multi-channel Fiber Links. IEEE
Bipolar/BiCMOS Circuits and Technology Meeting. https://doi.org/10.1109/BCTM.2017.8112922
bibtex: '@article{Gudyriev_Scheytt_Yan_Christian_Zimmermann_2017, title={Fully-differential,
DC-coupled, Self-biased, Monolithically-integrated Optical Receiver in 0.25μm
Photonic BiCMOS Technology for Multi-channel Fiber Links}, DOI={10.1109/BCTM.2017.8112922},
journal={IEEE Bipolar/BiCMOS Circuits and Technology Meeting}, author={Gudyriev,
Sergiy and Scheytt, Christoph and Yan, Lei and Christian, Meuer and Zimmermann,
Lars}, year={2017} }'
chicago: Gudyriev, Sergiy, Christoph Scheytt, Lei Yan, Meuer Christian, and Lars
Zimmermann. “Fully-Differential, DC-Coupled, Self-Biased, Monolithically-Integrated
Optical Receiver in 0.25μm Photonic BiCMOS Technology for Multi-Channel Fiber
Links.” IEEE Bipolar/BiCMOS Circuits and Technology Meeting, 2017. https://doi.org/10.1109/BCTM.2017.8112922.
ieee: 'S. Gudyriev, C. Scheytt, L. Yan, M. Christian, and L. Zimmermann, “Fully-differential,
DC-coupled, Self-biased, Monolithically-integrated Optical Receiver in 0.25μm
Photonic BiCMOS Technology for Multi-channel Fiber Links,” IEEE Bipolar/BiCMOS
Circuits and Technology Meeting, 2017, doi: 10.1109/BCTM.2017.8112922.'
mla: Gudyriev, Sergiy, et al. “Fully-Differential, DC-Coupled, Self-Biased, Monolithically-Integrated
Optical Receiver in 0.25μm Photonic BiCMOS Technology for Multi-Channel Fiber
Links.” IEEE Bipolar/BiCMOS Circuits and Technology Meeting, 2017, doi:10.1109/BCTM.2017.8112922.
short: S. Gudyriev, C. Scheytt, L. Yan, M. Christian, L. Zimmermann, IEEE Bipolar/BiCMOS
Circuits and Technology Meeting (2017).
conference:
end_date: 2017.10.21
start_date: 2017.10.19
date_created: 2021-09-13T08:15:30Z
date_updated: 2023-01-10T13:02:44Z
department:
- _id: '58'
- _id: '230'
doi: 10.1109/BCTM.2017.8112922
language:
- iso: eng
publication: IEEE Bipolar/BiCMOS Circuits and Technology Meeting
publication_identifier:
eissn:
- ' 2378-590X'
related_material:
link:
- relation: confirmation
url: https://ieeexplore.ieee.org/document/8112922
status: public
title: Fully-differential, DC-coupled, Self-biased, Monolithically-integrated Optical
Receiver in 0.25μm Photonic BiCMOS Technology for Multi-channel Fiber Links
type: journal_article
user_id: '15931'
year: '2017'
...
---
_id: '24226'
author:
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
orcid: https://orcid.org/0000-0002-5950-6618
citation:
ama: 'Scheytt C. Silicon Photonics Microsystems for Communications and Sensing.
In: W3+Fair on Optoelectronics, Electronics, and Mechanics. ; 2017.'
apa: Scheytt, C. (2017). Silicon Photonics Microsystems for Communications and Sensing.
W3+Fair on Optoelectronics, Electronics, and Mechanics.
bibtex: '@inproceedings{Scheytt_2017, place={Wetzlar, Germany}, title={Silicon Photonics
Microsystems for Communications and Sensing}, booktitle={W3+Fair on Optoelectronics,
Electronics, and Mechanics}, author={Scheytt, Christoph}, year={2017} }'
chicago: Scheytt, Christoph. “Silicon Photonics Microsystems for Communications
and Sensing.” In W3+Fair on Optoelectronics, Electronics, and Mechanics.
Wetzlar, Germany, 2017.
ieee: C. Scheytt, “Silicon Photonics Microsystems for Communications and Sensing,”
2017.
mla: Scheytt, Christoph. “Silicon Photonics Microsystems for Communications and
Sensing.” W3+Fair on Optoelectronics, Electronics, and Mechanics, 2017.
short: 'C. Scheytt, in: W3+Fair on Optoelectronics, Electronics, and Mechanics,
Wetzlar, Germany, 2017.'
conference:
end_date: 2017.02.22
start_date: 2017.02.21
date_created: 2021-09-13T08:20:43Z
date_updated: 2023-01-10T13:04:16Z
department:
- _id: '58'
- _id: '230'
language:
- iso: eng
place: Wetzlar, Germany
publication: W3+Fair on Optoelectronics, Electronics, and Mechanics
related_material:
link:
- relation: confirmation
url: https://www.technologieland-hessen.de/news/28134
status: public
title: Silicon Photonics Microsystems for Communications and Sensing
type: conference
user_id: '15931'
year: '2017'
...
---
_id: '24212'
abstract:
- lang: eng
text: A hybrid multi-channel receiver featuring fully-differential transimpedance
input stages for 25Gbps data rate per channel is presented along with measurement
results focusing on the channel-to-channel interference and sensitivity. OMA of
-16dBm at a BER of 10−4 is estimated at the photodiode for all channels. Each
channel dissipates 330mW of power provided from a single 3.3V supply voltage.
author:
- first_name: Sergiy
full_name: Gudyriev, Sergiy
last_name: Gudyriev
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
orcid: https://orcid.org/0000-0002-5950-6618
- first_name: Christian
full_name: Kress, Christian
id: '13256'
last_name: Kress
- first_name: Lei
full_name: Yan, Lei
last_name: Yan
- first_name: Meuer
full_name: Christian, Meuer
last_name: Christian
- first_name: Lars
full_name: Zimmermann, Lars
last_name: Zimmermann
citation:
ama: Gudyriev S, Scheytt C, Kress C, Yan L, Christian M, Zimmermann L. Fully-Differential,
Hybrid, Multi-channel 4x25Gbps Direct Direction Receiver in 0.25\textmum BiCMOS
SiGe Technology. OSA Frontiers in Optics + Laser Science. Published online
2017. doi:https://doi.org/10.1364/FIO.2017.FM3A.3
apa: Gudyriev, S., Scheytt, C., Kress, C., Yan, L., Christian, M., & Zimmermann,
L. (2017). Fully-Differential, Hybrid, Multi-channel 4x25Gbps Direct Direction
Receiver in 0.25\textmum BiCMOS SiGe Technology. OSA Frontiers in Optics +
Laser Science. https://doi.org/10.1364/FIO.2017.FM3A.3
bibtex: '@article{Gudyriev_Scheytt_Kress_Yan_Christian_Zimmermann_2017, title={Fully-Differential,
Hybrid, Multi-channel 4x25Gbps Direct Direction Receiver in 0.25\textmum BiCMOS
SiGe Technology}, DOI={https://doi.org/10.1364/FIO.2017.FM3A.3},
journal={OSA Frontiers in Optics + Laser Science}, author={Gudyriev, Sergiy and
Scheytt, Christoph and Kress, Christian and Yan, Lei and Christian, Meuer and
Zimmermann, Lars}, year={2017} }'
chicago: Gudyriev, Sergiy, Christoph Scheytt, Christian Kress, Lei Yan, Meuer Christian,
and Lars Zimmermann. “Fully-Differential, Hybrid, Multi-Channel 4x25Gbps Direct
Direction Receiver in 0.25\textmum BiCMOS SiGe Technology.” OSA Frontiers in
Optics + Laser Science, 2017. https://doi.org/10.1364/FIO.2017.FM3A.3.
ieee: 'S. Gudyriev, C. Scheytt, C. Kress, L. Yan, M. Christian, and L. Zimmermann,
“Fully-Differential, Hybrid, Multi-channel 4x25Gbps Direct Direction Receiver
in 0.25\textmum BiCMOS SiGe Technology,” OSA Frontiers in Optics + Laser Science,
2017, doi: https://doi.org/10.1364/FIO.2017.FM3A.3.'
mla: Gudyriev, Sergiy, et al. “Fully-Differential, Hybrid, Multi-Channel 4x25Gbps
Direct Direction Receiver in 0.25\textmum BiCMOS SiGe Technology.” OSA Frontiers
in Optics + Laser Science, 2017, doi:https://doi.org/10.1364/FIO.2017.FM3A.3.
short: S. Gudyriev, C. Scheytt, C. Kress, L. Yan, M. Christian, L. Zimmermann, OSA
Frontiers in Optics + Laser Science (2017).
conference:
end_date: 2017.09.21
start_date: 2017.09.18
date_created: 2021-09-13T08:15:31Z
date_updated: 2023-08-04T08:31:47Z
department:
- _id: '58'
- _id: '230'
doi: https://doi.org/10.1364/FIO.2017.FM3A.3
language:
- iso: eng
publication: OSA Frontiers in Optics + Laser Science
publication_identifier:
isbn:
- 978-1-943580-33-0
related_material:
link:
- relation: confirmation
url: https://www.osapublishing.org/abstract.cfm?uri=FiO-2017-FM3A.3
status: public
title: Fully-Differential, Hybrid, Multi-channel 4x25Gbps Direct Direction Receiver
in 0.25\textmum BiCMOS SiGe Technology
type: journal_article
user_id: '13256'
year: '2017'
...
---
_id: '24219'
abstract:
- lang: eng
text: In this paper we present theoretical, simulated and measured data for a reader
to tag communication RFID system at 5.8 GHz. First a theoretical link budget analysis
for a reader to tag architecture is shown for a wireless industrial application
at 1m distance. This includes a power budget of the passively powered transponder.
The received power level of the backscattered data for the theoretical link budget
is -52:5 dBm. For the first setup slot antennas are developed and measured in
the anechoic chamber. The measured gain is 4.0 dB. The power of the backscatter
data in setup 1 is -74:8 dBm. This corresponds to the theoretical link budget
since, all losses such as cable or lower antenna gain are taken into account.
Setup 2 is upgraded on the reader side with horn antennas. At 5.8 GHz, the gain
reaches the value of 10.8 dB. The second setup shows improvement in the receiving
backscattered power to a value of -62:4 dBm. Furthermore, as a solution to detect
those transponders not presented in the main slope of the antenna, a steerable
beam is introduced by means of a Rotman lens. On the topic of the passive transponder,
different harvesting topologies at 5.8 GHz are investigated, and the efficiency
simulation of the harvesting circuitry has been performed. The simulated efficiency
of the implemented technique is 68 %.
author:
- first_name: Peter
full_name: Kuhn, Peter
last_name: Kuhn
- first_name: Sanaz
full_name: Haddadian, Sanaz
id: '59648'
last_name: Haddadian
- first_name: Frederic
full_name: Meyer, Frederic
last_name: Meyer
- first_name: Marc
full_name: Hoffmann, Marc
last_name: Hoffmann
- first_name: Anton
full_name: Grabmaier, Anton
last_name: Grabmaier
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
orcid: '0000-0002-5950-6618 '
- first_name: Thomas
full_name: Kaiser, Thomas
last_name: Kaiser
citation:
ama: 'Kuhn P, Haddadian S, Meyer F, et al. SHF RFID System for Automatic Process
Optimization with Intelligent Tools. In: Smart SysTech 2017; European Conference
on Smart Objects, Systems and Technologies. VDE ITG; 2017.'
apa: Kuhn, P., Haddadian, S., Meyer, F., Hoffmann, M., Grabmaier, A., Scheytt, C.,
& Kaiser, T. (2017). SHF RFID System for Automatic Process Optimization with
Intelligent Tools. Smart SysTech 2017; European Conference on Smart Objects,
Systems and Technologies.
bibtex: '@inproceedings{Kuhn_Haddadian_Meyer_Hoffmann_Grabmaier_Scheytt_Kaiser_2017,
place={München, Germany}, title={SHF RFID System for Automatic Process Optimization
with Intelligent Tools}, booktitle={Smart SysTech 2017; European Conference on
Smart Objects, Systems and Technologies}, publisher={VDE ITG}, author={Kuhn, Peter
and Haddadian, Sanaz and Meyer, Frederic and Hoffmann, Marc and Grabmaier, Anton
and Scheytt, Christoph and Kaiser, Thomas}, year={2017} }'
chicago: 'Kuhn, Peter, Sanaz Haddadian, Frederic Meyer, Marc Hoffmann, Anton Grabmaier,
Christoph Scheytt, and Thomas Kaiser. “SHF RFID System for Automatic Process Optimization
with Intelligent Tools.” In Smart SysTech 2017; European Conference on Smart
Objects, Systems and Technologies. München, Germany: VDE ITG, 2017.'
ieee: P. Kuhn et al., “SHF RFID System for Automatic Process Optimization
with Intelligent Tools,” 2017.
mla: Kuhn, Peter, et al. “SHF RFID System for Automatic Process Optimization with
Intelligent Tools.” Smart SysTech 2017; European Conference on Smart Objects,
Systems and Technologies, VDE ITG, 2017.
short: 'P. Kuhn, S. Haddadian, F. Meyer, M. Hoffmann, A. Grabmaier, C. Scheytt,
T. Kaiser, in: Smart SysTech 2017; European Conference on Smart Objects, Systems
and Technologies, VDE ITG, München, Germany, 2017.'
date_created: 2021-09-13T08:20:34Z
date_updated: 2025-02-13T14:23:57Z
department:
- _id: '58'
language:
- iso: eng
place: München, Germany
publication: Smart SysTech 2017; European Conference on Smart Objects, Systems and
Technologies
publication_identifier:
isbn:
- 978-3-8007-4428-2
publisher: VDE ITG
status: public
title: SHF RFID System for Automatic Process Optimization with Intelligent Tools
type: conference
user_id: '59648'
year: '2017'
...
---
_id: '24222'
abstract:
- lang: eng
text: "This paper focuses on the design of a high\r\nefficiency cross-connected
differential drive rectifier for\r\nnext-generation passive RFID tags. To provide
a\r\nrealistic estimation of the transponders’power and\r\nefficiency requirements
at 5.8 GHz, detailed\r\nlink/power-budget analysis for various blocks of the tag\r\nchip
is carried out. From link budget analysis realistic\r\nRF power levels
\ are obtained and a rectifier with high\r\nconversion efficiency at low
\ power levels is designed.\r\nSimulations based on a commercial 65nm CMOS\r\ntechnology
\ investigate the suitability of the harvesting\r\ncircuit for 5.8 GHz RFID
tags."
author:
- first_name: Sanaz
full_name: Haddadian, Sanaz
id: '59648'
last_name: Haddadian
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
orcid: '0000-0002-5950-6618 '
- first_name: Roland
full_name: Kramer, Roland
last_name: Kramer
citation:
ama: 'Haddadian S, Scheytt C, Kramer R. Energy Harvesting Analysis for Next Generation
Passive RFID Tags. In: ANALOG 2017; 16th ITG/GMM-Symposium. Technische
Universität Berlin; 2017:18.'
apa: Haddadian, S., Scheytt, C., & Kramer, R. (2017). Energy Harvesting Analysis
for Next Generation Passive RFID Tags. ANALOG 2017; 16th ITG/GMM-Symposium,
18.
bibtex: '@inproceedings{Haddadian_Scheytt_Kramer_2017, place={Berlin, Germany},
title={Energy Harvesting Analysis for Next Generation Passive RFID Tags}, booktitle={ANALOG
2017; 16th ITG/GMM-Symposium}, publisher={Technische Universität Berlin}, author={Haddadian,
Sanaz and Scheytt, Christoph and Kramer, Roland}, year={2017}, pages={18} }'
chicago: 'Haddadian, Sanaz, Christoph Scheytt, and Roland Kramer. “Energy Harvesting
Analysis for Next Generation Passive RFID Tags.” In ANALOG 2017; 16th ITG/GMM-Symposium,
18. Berlin, Germany: Technische Universität Berlin, 2017.'
ieee: S. Haddadian, C. Scheytt, and R. Kramer, “Energy Harvesting Analysis for Next
Generation Passive RFID Tags,” in ANALOG 2017; 16th ITG/GMM-Symposium,
2017, p. 18.
mla: Haddadian, Sanaz, et al. “Energy Harvesting Analysis for Next Generation Passive
RFID Tags.” ANALOG 2017; 16th ITG/GMM-Symposium, Technische Universität
Berlin, 2017, p. 18.
short: 'S. Haddadian, C. Scheytt, R. Kramer, in: ANALOG 2017; 16th ITG/GMM-Symposium,
Technische Universität Berlin, Berlin, Germany, 2017, p. 18.'
date_created: 2021-09-13T08:20:37Z
date_updated: 2025-02-13T14:24:50Z
department:
- _id: '58'
language:
- iso: eng
page: '18'
place: Berlin, Germany
publication: ANALOG 2017; 16th ITG/GMM-Symposium
publisher: Technische Universität Berlin
status: public
title: Energy Harvesting Analysis for Next Generation Passive RFID Tags
type: conference
user_id: '59648'
year: '2017'
...
---
_id: '25069'
author:
- first_name: Peer
full_name: Adelt, Peer
id: '5603'
last_name: Adelt
- first_name: Bastian
full_name: Koppelmann, Bastian
id: '25260'
last_name: Koppelmann
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Bernd
full_name: Kleinjohann, Bernd
last_name: Kleinjohann
- first_name: J. Christoph
full_name: Scheytt, J. Christoph
id: '37144'
last_name: Scheytt
orcid: '0000-0002-5950-6618 '
citation:
ama: 'Adelt P, Koppelmann B, Müller W, Kleinjohann B, Scheytt JC. ANALISA - A Tool
for Static Instruction Set Analysis. In: University Booth Interactive Presentation,
ed. Design Automation and Testing in Europe (DATE). ; 2017.'
apa: Adelt, P., Koppelmann, B., Müller, W., Kleinjohann, B., & Scheytt, J. C.
(2017). ANALISA - A Tool for Static Instruction Set Analysis. In University Booth
Interactive Presentation (Ed.), Design Automation and Testing in Europe (DATE).
bibtex: '@inproceedings{Adelt_Koppelmann_Müller_Kleinjohann_Scheytt_2017, title={ANALISA
- A Tool for Static Instruction Set Analysis}, booktitle={Design Automation and
Testing in Europe (DATE)}, author={Adelt, Peer and Koppelmann, Bastian and Müller,
Wolfgang and Kleinjohann, Bernd and Scheytt, J. Christoph}, editor={University
Booth Interactive Presentation}, year={2017} }'
chicago: Adelt, Peer, Bastian Koppelmann, Wolfgang Müller, Bernd Kleinjohann, and
J. Christoph Scheytt. “ANALISA - A Tool for Static Instruction Set Analysis.”
In Design Automation and Testing in Europe (DATE), edited by University
Booth Interactive Presentation, 2017.
ieee: P. Adelt, B. Koppelmann, W. Müller, B. Kleinjohann, and J. C. Scheytt, “ANALISA
- A Tool for Static Instruction Set Analysis,” in Design Automation and Testing
in Europe (DATE), Lausanne, CH, Mrz. 2017, 2017.
mla: Adelt, Peer, et al. “ANALISA - A Tool for Static Instruction Set Analysis.”
Design Automation and Testing in Europe (DATE), edited by University Booth
Interactive Presentation, 2017.
short: 'P. Adelt, B. Koppelmann, W. Müller, B. Kleinjohann, J.C. Scheytt, in: University
Booth Interactive Presentation (Ed.), Design Automation and Testing in Europe
(DATE), 2017.'
conference:
location: Lausanne, CH, Mrz. 2017
corporate_editor:
- University Booth Interactive Presentation
date_created: 2021-09-28T11:12:00Z
date_updated: 2025-02-26T14:45:23Z
department:
- _id: '672'
language:
- iso: eng
publication: Design Automation and Testing in Europe (DATE)
status: public
title: ANALISA - A Tool for Static Instruction Set Analysis
type: conference
user_id: '5603'
year: '2017'
...
---
_id: '24264'
abstract:
- lang: eng
text: Electronic systems, like they are embedded in road vehicles, have to be compliant
to functional safety standards like ISO 26262 [1], which limit the impacts of
malfunctions for safety critical systems. ISO 26262, for instance, defines different
safety levels for road vehicles, which require different means and measures for
a safety compliant system and its development process like risk analysis and fault
effect simulation. For fault effect simulation it is important to investigate
the impact of physical and hardware related effects to the correct function of
a system. This article first studies code and model mutations for fault injection
in the context of fault effect simulation through different system abstraction
levels. It demonstrates how high level mutations correlate to bit flips of software
binaries by examples from the TriCore™ instruction set and finally presents a
virtual platform based implementation for automated injection of bit flip based
mutations into software binaries. Experimental results demonstrate the efficiency
of the implemented approach.
author:
- first_name: Peer
full_name: Adelt, Peer
id: '5603'
last_name: Adelt
- first_name: Bastian
full_name: Koppelmann, Bastian
id: '25260'
last_name: Koppelmann
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Markus
full_name: Becker, Markus
last_name: Becker
- first_name: Bernd
full_name: Kleinjohann, Bernd
last_name: Kleinjohann
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
citation:
ama: 'Adelt P, Koppelmann B, Müller W, Becker M, Kleinjohann B, Scheytt C. Fast
Dynamic Fault Injection for Virtual Microcontroller Platforms. In: Proceedings
of the IEEE/IFIP International Conference on VLSI (VLSI-SOC). ; 2016. doi:10.1109/VLSI-SoC.2016.7753545'
apa: Adelt, P., Koppelmann, B., Müller, W., Becker, M., Kleinjohann, B., & Scheytt,
C. (2016). Fast Dynamic Fault Injection for Virtual Microcontroller Platforms.
Proceedings of the IEEE/IFIP International Conference on VLSI (VLSI-SOC).
https://doi.org/10.1109/VLSI-SoC.2016.7753545
bibtex: '@inproceedings{Adelt_Koppelmann_Müller_Becker_Kleinjohann_Scheytt_2016,
place={Tallin, Estonia}, title={Fast Dynamic Fault Injection for Virtual Microcontroller
Platforms}, DOI={10.1109/VLSI-SoC.2016.7753545},
booktitle={Proceedings of the IEEE/IFIP International Conference on VLSI (VLSI-SOC)},
author={Adelt, Peer and Koppelmann, Bastian and Müller, Wolfgang and Becker, Markus
and Kleinjohann, Bernd and Scheytt, Christoph}, year={2016} }'
chicago: Adelt, Peer, Bastian Koppelmann, Wolfgang Müller, Markus Becker, Bernd
Kleinjohann, and Christoph Scheytt. “Fast Dynamic Fault Injection for Virtual
Microcontroller Platforms.” In Proceedings of the IEEE/IFIP International Conference
on VLSI (VLSI-SOC). Tallin, Estonia, 2016. https://doi.org/10.1109/VLSI-SoC.2016.7753545.
ieee: 'P. Adelt, B. Koppelmann, W. Müller, M. Becker, B. Kleinjohann, and C. Scheytt,
“Fast Dynamic Fault Injection for Virtual Microcontroller Platforms,” 2016, doi:
10.1109/VLSI-SoC.2016.7753545.'
mla: Adelt, Peer, et al. “Fast Dynamic Fault Injection for Virtual Microcontroller
Platforms.” Proceedings of the IEEE/IFIP International Conference on VLSI (VLSI-SOC),
2016, doi:10.1109/VLSI-SoC.2016.7753545.
short: 'P. Adelt, B. Koppelmann, W. Müller, M. Becker, B. Kleinjohann, C. Scheytt,
in: Proceedings of the IEEE/IFIP International Conference on VLSI (VLSI-SOC),
Tallin, Estonia, 2016.'
conference:
end_date: 2016.09.28
start_date: 2016.09.26
date_created: 2021-09-13T09:44:30Z
date_updated: 2022-02-17T13:57:45Z
department:
- _id: '58'
doi: 10.1109/VLSI-SoC.2016.7753545
language:
- iso: eng
place: Tallin, Estonia
publication: Proceedings of the IEEE/IFIP International Conference on VLSI (VLSI-SOC)
publication_identifier:
eissn:
- 2324-8440
related_material:
link:
- relation: confirmation
url: https://ieeexplore.ieee.org/document/7753545
status: public
title: Fast Dynamic Fault Injection for Virtual Microcontroller Platforms
type: conference
user_id: '15931'
year: '2016'
...
---
_id: '24265'
abstract:
- lang: eng
text: This paper presents a four stage all-transmission-line 220 GHz differential
LNA in SiGe BiCMOS technology. Cascode topology is chosen for each stage. The
amplifier takes advantage of microstrip transmission lines to realize the inductive
load, Marshand balun, input, output, and inter-stage matching of the LNA. The
LNA has a gain of 21 dB at 224 GHz, a 3 dB bandwidth of more than 6 GHz. It has
a supply voltage of 3V and power dissipation of 234 mW. The amplifier is intended
for the use in communication, security scanning, imaging and remote sensing at
220 GHz.
author:
- first_name: Yanfei
full_name: Mao, Yanfei
last_name: Mao
- first_name: Klaus
full_name: Schmalz, Klaus
last_name: Schmalz
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
- first_name: E.
full_name: Shiju, E.
last_name: Shiju
citation:
ama: 'Mao Y, Schmalz K, Scheytt C, Shiju E. An all-transmission-line 220 GHz differential
LNA in SiGe BiCMOS. In: IEEE International Symposium on Radio-Frequency Integration
Technology. ; 2016. doi:10.1109/RFIT.2016.7578132'
apa: Mao, Y., Schmalz, K., Scheytt, C., & Shiju, E. (2016). An all-transmission-line
220 GHz differential LNA in SiGe BiCMOS. IEEE International Symposium on Radio-Frequency
Integration Technology. https://doi.org/10.1109/RFIT.2016.7578132
bibtex: '@inproceedings{Mao_Schmalz_Scheytt_Shiju_2016, place={Taipei, Taiwan},
title={An all-transmission-line 220 GHz differential LNA in SiGe BiCMOS}, DOI={10.1109/RFIT.2016.7578132},
booktitle={IEEE International Symposium on Radio-Frequency Integration Technology},
author={Mao, Yanfei and Schmalz, Klaus and Scheytt, Christoph and Shiju, E.},
year={2016} }'
chicago: Mao, Yanfei, Klaus Schmalz, Christoph Scheytt, and E. Shiju. “An All-Transmission-Line
220 GHz Differential LNA in SiGe BiCMOS.” In IEEE International Symposium on
Radio-Frequency Integration Technology. Taipei, Taiwan, 2016. https://doi.org/10.1109/RFIT.2016.7578132.
ieee: 'Y. Mao, K. Schmalz, C. Scheytt, and E. Shiju, “An all-transmission-line 220
GHz differential LNA in SiGe BiCMOS,” 2016, doi: 10.1109/RFIT.2016.7578132.'
mla: Mao, Yanfei, et al. “An All-Transmission-Line 220 GHz Differential LNA in SiGe
BiCMOS.” IEEE International Symposium on Radio-Frequency Integration Technology,
2016, doi:10.1109/RFIT.2016.7578132.
short: 'Y. Mao, K. Schmalz, C. Scheytt, E. Shiju, in: IEEE International Symposium
on Radio-Frequency Integration Technology, Taipei, Taiwan, 2016.'
conference:
end_date: 2016.08.26
start_date: 2016.08.24
date_created: 2021-09-13T09:44:31Z
date_updated: 2022-02-17T14:00:40Z
department:
- _id: '58'
doi: 10.1109/RFIT.2016.7578132
language:
- iso: eng
place: Taipei, Taiwan
publication: IEEE International Symposium on Radio-Frequency Integration Technology
publication_identifier:
eisbn:
- 978-1-5090-1235-0
related_material:
link:
- relation: confirmation
url: https://ieeexplore.ieee.org/document/7578132
status: public
title: An all-transmission-line 220 GHz differential LNA in SiGe BiCMOS
type: conference
user_id: '15931'
year: '2016'
...
---
_id: '24263'
abstract:
- lang: eng
text: The design of safety critical systems requires an efficient methodology for
an effective fault effect simulation for analog and digital circuits where analog
fault injection and fault effect simulation is currently a field of active research
and commercial tools are not available yet. This article begins by discussing
fault injection strategies for analog circuits applied on a case study with two
topologies of a Voltage Controlled Oscillator (VCO). In the second part it performs
on the basis of the example of a Wireless Sensor Network (WSN) node, how far different
mixed level implementations with Verilog-A and SPICE can affect the simulation
time and points out which component consumes the major part of the simulation
time.
author:
- first_name: Saed
full_name: Abughannam, Saed
id: '37628'
last_name: Abughannam
- first_name: Liang
full_name: Wu, Liang
id: '30401'
last_name: Wu
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Christoph
full_name: Scheytt, Christoph
id: '37144'
last_name: Scheytt
- first_name: Wolfgang
full_name: Ecker, Wolfgang
last_name: Ecker
- first_name: Christiano
full_name: Novello, Christiano
last_name: Novello
citation:
ama: 'Abughannam S, Wu L, Müller W, Scheytt C, Ecker W, Novello C. Fault Injection
and Mixed-Level Simulation for Analog Circuits - A Case Study. In: Analog 2016
- VDE. ; 2016.'
apa: Abughannam, S., Wu, L., Müller, W., Scheytt, C., Ecker, W., & Novello,
C. (2016). Fault Injection and Mixed-Level Simulation for Analog Circuits - A
Case Study. Analog 2016 - VDE.
bibtex: '@inproceedings{Abughannam_Wu_Müller_Scheytt_Ecker_Novello_2016, title={Fault
Injection and Mixed-Level Simulation for Analog Circuits - A Case Study}, booktitle={Analog
2016 - VDE}, author={Abughannam, Saed and Wu, Liang and Müller, Wolfgang and Scheytt,
Christoph and Ecker, Wolfgang and Novello, Christiano}, year={2016} }'
chicago: Abughannam, Saed, Liang Wu, Wolfgang Müller, Christoph Scheytt, Wolfgang
Ecker, and Christiano Novello. “Fault Injection and Mixed-Level Simulation for
Analog Circuits - A Case Study.” In Analog 2016 - VDE, 2016.
ieee: S. Abughannam, L. Wu, W. Müller, C. Scheytt, W. Ecker, and C. Novello, “Fault
Injection and Mixed-Level Simulation for Analog Circuits - A Case Study,” 2016.
mla: Abughannam, Saed, et al. “Fault Injection and Mixed-Level Simulation for Analog
Circuits - A Case Study.” Analog 2016 - VDE, 2016.
short: 'S. Abughannam, L. Wu, W. Müller, C. Scheytt, W. Ecker, C. Novello, in: Analog
2016 - VDE, 2016.'
conference:
end_date: 2016.09.14
start_date: 2016.09.12
date_created: 2021-09-13T09:44:29Z
date_updated: 2022-02-17T13:58:08Z
department:
- _id: '58'
language:
- iso: eng
publication: Analog 2016 - VDE
publication_identifier:
isbn:
- 978-3-8007-4265-3
related_material:
link:
- relation: confirmation
url: https://ieeexplore.ieee.org/document/7584296/
status: public
title: Fault Injection and Mixed-Level Simulation for Analog Circuits - A Case Study
type: conference
user_id: '15931'
year: '2016'
...