[{"quality_controlled":"1","year":"2025","date_created":"2025-12-01T13:46:42Z","publisher":"Deutsche Gesellschaft für Materialkunde (DGM)","title":"Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen","publication":"Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen","abstract":[{"lang":"ger","text":"Aluminium-Silizium-Legierungen (AlSi) werden insbesondere bei der gießtechnischen\r\nHerstellung von Leichtbaukomponenten für Fahrzeuge verwendet. Dieses Legierungssystem hat hervorragende\r\nGießeigenschaften bei gleichzeitig akzeptablen mechanischen Eigenschaften. Aufgrund des hohen\r\nSilizium-(Si)-Gehaltes, wodurch die Volumenkontraktion im Phasenübergang von flüssig-fest nahezu\r\nunterbunden wird, neigen AlSi-Legierungen dazu, feinere oder gröbere Si-Platten bei unterschiedlichen\r\nErstarrungsgeschwindigkeiten zu bilden. Um die mechanischen Eigenschaften zu verbessern, werden\r\ndem Legierungssystem in der Schmelzphase entweder Natrium (Na) oder Strontium (Sr) zugesetzt. Dies\r\nhat zur Folge, dass sich eine fein lamellare Si-Morphologie bei der Erstarrung ausbildet; dies kann ebenfalls\r\ndurch hohe Erstarrungsgeschwindigkeiten erreicht werden. Ein nachfolgendes Lösungsglühen bewirkt\r\neine Sphäroidisierung der Si-Partikel und dient der Steigerung der Duktilität. Aktuell fehlen fundierte\r\nErkenntnisse zur Ausprägung der Si-Morphologie in Abhängigkeit der Erstarrungsgeschwindigkeit oder\r\ninfolge einer Wärmebehandlung. Vor diesem Hintergrund werden in dieser Studie verschiedene Behandlungsparameter\r\nin Bezug auf das Einformverhalten der Si-Partikel mit einem bildauswertenden Verfahren\r\nevaluiert sowie unter Bezug auf verschiedene chemische Zusammensetzungen miteinander korreliert."},{"lang":"eng","text":"Aluminium-silicon alloys (AlSi) are used in the casting of lightweight vehicle components. This\r\nalloy system has excellent casting properties accompanied by acceptable mechanical properties. Due to\r\nthe high silicon (Si) content, which almost completely prevents volume contraction during the liquid-solid\r\nphase transition, AlSi alloys tend to form finer or coarser Si plates at different solidification rates. To\r\nimprove the mechanical properties, either sodium (Na) or strontium (Sr) is added to the alloy system in\r\nthe melting phase. This results in the formation of a fine lamellar Si morphology during solidification, which\r\ncan also be achieved by high solidification rates. Subsequent solution annealing causes spheroidisation\r\nof the Si particles and increases ductility. Currently, there is a lack in scientific knowledge regarding the\r\nSi-morphology as a function of solidification rate or as a result of heat treatment. Therefore, this study\r\nevaluates various treatment parameters in relation to the shaping behaviour of Si particles using an image\r\nanalysis method and correlates them with different chemical compositions."}],"language":[{"iso":"ger"}],"keyword":["Bildauswertendes Verfahren","Mikrostrukturanalyse","AlSi-System","Si-Morphologie"],"publication_identifier":{"isbn":["978-3-88355-454-9"]},"publication_status":"published","page":"454 - 459","intvolume":" 43","citation":{"apa":"Neuser, M., Cichon, G., Hoyer, K.-P., & Schaper, M. (2025). Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen. Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen, 43, 454–459.","bibtex":"@inproceedings{Neuser_Cichon_Hoyer_Schaper_2025, place={Sankt Augustin}, title={Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen}, volume={43}, booktitle={Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen}, publisher={Deutsche Gesellschaft für Materialkunde (DGM)}, author={Neuser, Moritz and Cichon, Gerrit and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025}, pages={454–459} }","mla":"Neuser, Moritz, et al. “Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen.” Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen, vol. 43, Deutsche Gesellschaft für Materialkunde (DGM), 2025, pp. 454–59.","short":"M. Neuser, G. Cichon, K.-P. Hoyer, M. Schaper, in: Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen, Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 2025, pp. 454–459.","ama":"Neuser M, Cichon G, Hoyer K-P, Schaper M. Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen. In: Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen. Vol 43. Deutsche Gesellschaft für Materialkunde (DGM); 2025:454-459.","chicago":"Neuser, Moritz, Gerrit Cichon, Kay-Peter Hoyer, and Mirko Schaper. “Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen.” In Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen, 43:454–59. Sankt Augustin: Deutsche Gesellschaft für Materialkunde (DGM), 2025.","ieee":"M. Neuser, G. Cichon, K.-P. Hoyer, and M. Schaper, “Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen,” in Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen, Dresden, 2025, vol. 43, pp. 454–459."},"place":"Sankt Augustin","volume":43,"author":[{"last_name":"Neuser","id":"32340","full_name":"Neuser, Moritz","first_name":"Moritz"},{"full_name":"Cichon, Gerrit","last_name":"Cichon","first_name":"Gerrit"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"date_updated":"2025-12-01T13:46:53Z","conference":{"end_date":"2025-11-28","location":"Dresden","name":"Werkstoffprüfung - 43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025","start_date":"2025-11-27"},"type":"conference","status":"public","department":[{"_id":"43"},{"_id":"9"},{"_id":"158"},{"_id":"321"}],"user_id":"32340","_id":"62725","project":[{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"},{"name":"TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 - Subproject A02","_id":"136"}],"alternative_title":["Image analysis method for evaluating the microstructure of AlSi-alloys"]},{"publication_status":"published","has_accepted_license":"1","year":"2025","place":"Hannover","citation":{"chicago":"Haase, Michael, Marius Behrendt, Florian Hengsbach, Vinay Kunnathully Sathees Kumar, Sebastian Magerkohl, Balázs Magyar, Bernd Ponick, Mirko Schaper, and Detmar Zimmer. Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen. Hannover: Technische Informationsbibliothek, 2025. https://doi.org/10.34657/26753.","ieee":"M. Haase et al., Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen. Hannover: Technische Informationsbibliothek, 2025.","ama":"Haase M, Behrendt M, Hengsbach F, et al. Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen. Technische Informationsbibliothek; 2025. doi:10.34657/26753","apa":"Haase, M., Behrendt, M., Hengsbach, F., Kunnathully Sathees Kumar, V., Magerkohl, S., Magyar, B., Ponick, B., Schaper, M., & Zimmer, D. (2025). Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen. Technische Informationsbibliothek. https://doi.org/10.34657/26753","mla":"Haase, Michael, et al. Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen. Technische Informationsbibliothek, 2025, doi:10.34657/26753.","short":"M. Haase, M. Behrendt, F. Hengsbach, V. Kunnathully Sathees Kumar, S. Magerkohl, B. Magyar, B. Ponick, M. Schaper, D. Zimmer, Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen, Technische Informationsbibliothek, Hannover, 2025.","bibtex":"@book{Haase_Behrendt_Hengsbach_Kunnathully Sathees Kumar_Magerkohl_Magyar_Ponick_Schaper_Zimmer_2025, place={Hannover}, title={Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen}, DOI={10.34657/26753}, publisher={Technische Informationsbibliothek}, author={Haase, Michael and Behrendt, Marius and Hengsbach, Florian and Kunnathully Sathees Kumar, Vinay and Magerkohl, Sebastian and Magyar, Balázs and Ponick, Bernd and Schaper, Mirko and Zimmer, Detmar}, year={2025} }"},"date_updated":"2026-01-06T08:09:33Z","publisher":"Technische Informationsbibliothek","oa":"1","author":[{"first_name":"Michael","last_name":"Haase","full_name":"Haase, Michael","id":"35970"},{"full_name":"Behrendt, Marius","last_name":"Behrendt","first_name":"Marius"},{"full_name":"Hengsbach, Florian","id":"14073","last_name":"Hengsbach","first_name":"Florian"},{"first_name":"Vinay","last_name":"Kunnathully Sathees Kumar","id":"60979","full_name":"Kunnathully Sathees Kumar, Vinay"},{"first_name":"Sebastian","full_name":"Magerkohl, Sebastian","id":"28520","last_name":"Magerkohl"},{"full_name":"Magyar, Balázs","id":"97759","last_name":"Magyar","first_name":"Balázs"},{"full_name":"Ponick, Bernd","last_name":"Ponick","first_name":"Bernd"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"},{"first_name":"Detmar","id":"604","full_name":"Zimmer, Detmar","last_name":"Zimmer"}],"date_created":"2025-12-18T12:14:12Z","title":"Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen","main_file_link":[{"open_access":"1","url":"https://oa.tib.eu/renate/bitstreams/9121e5bb-d113-4cfe-8fc6-610465afcd66/download"}],"doi":"10.34657/26753","type":"report","abstract":[{"text":"Die DFG-Projekte AddFeRo-PM (406108415) und AddFeRo-SR (465089065) untersuchten die Potenziale des LB-PBF/M-Verfahrens zur Herstellung von Rotoren für unterschiedliche elektrische Maschinen. Im interdisziplinären Ansatz wurden Materialentwicklung und mechanische sowie elektromagnetische Optimierung verbunden. Im Projekt „AddFeRo-PM“ wurde der Rotor einer permanentmagneterregten Synchron- maschine (PMSM) untersucht. FeSi erwies sich als geeignete Legierung, konnte aber wegen Spannungsrissen nur bis zu 3 % Siliziumanteil (kurz: FeSi3) verarbeitet werden. Mechanische und elektromagnetische Untersuchungen ermöglichten eine 3D-Optimierung der Rotorgeometrie und -struktur. Der Demonstrator wurde additiv gefertigt und zeigt Leicht-baupotenziale sowie reduzierte Drehmomentwelligkeit. Im Folgeprojekt „AddFeRo-SR“ kam eine Hochtemperatur-Bauraumheizung (HTBH) zum Einsatz, die FeSi mit 6,5 % Siliziumanteil verarbeitbar machte, welches bessere elektro- magnetische Eigenschaften bietet. Sie wurde bei einer Synchron-Reluktanzmaschine (SynRM) getestet. Eine hybride Rotorfertigung erwies sich jedoch aufgrund von HTBH-Einschränkungen als ungeeignet, weshalb eine einteilige Fertigung mit FeSi3 umgesetzt wurde. Experimente bestätigten vergleichbare Betriebsergebnisse zur konventionellen Fertigung bei reduzierter Rotormasse. Zusätzlich wurde eine Methodik entwickelt, um additive Verfahren als Ergänzung zur konventionellen Fertigung zu integrieren. Beide Projekte zeigen das Potenzial additiver Fertigung für Leichtbau und Wirkungsgradsteigerung im Elektromaschinenbau und bieten wertvolle Grundlagen für industrielle Anwendungen.","lang":"ger"}],"status":"public","_id":"63209","user_id":"97759","department":[{"_id":"146"},{"_id":"158"}],"keyword":["Additive Fertigung","Elektromotor","Leichtbau","Synchronmotor","DFG"],"language":[{"iso":"ger"}]},{"volume":14,"author":[{"last_name":"Milaege","full_name":"Milaege, Dennis","id":"35461","first_name":"Dennis"},{"first_name":"Niklas","full_name":"Eschemann, Niklas","last_name":"Eschemann"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Mirko","id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper"}],"date_updated":"2024-03-22T14:22:36Z","doi":"10.3390/cryst14020117","publication_identifier":{"issn":["2073-4352"]},"publication_status":"published","intvolume":" 14","citation":{"apa":"Milaege, D., Eschemann, N., Hoyer, K.-P., & Schaper, M. (2024). Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion. Crystals, 14(2), Article 117. https://doi.org/10.3390/cryst14020117","short":"D. Milaege, N. Eschemann, K.-P. Hoyer, M. Schaper, Crystals 14 (2024).","mla":"Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” Crystals, vol. 14, no. 2, 117, MDPI AG, 2024, doi:10.3390/cryst14020117.","bibtex":"@article{Milaege_Eschemann_Hoyer_Schaper_2024, title={Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion}, volume={14}, DOI={10.3390/cryst14020117}, number={2117}, journal={Crystals}, publisher={MDPI AG}, author={Milaege, Dennis and Eschemann, Niklas and Hoyer, Kay-Peter and Schaper, Mirko}, year={2024} }","ama":"Milaege D, Eschemann N, Hoyer K-P, Schaper M. Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion. Crystals. 2024;14(2). doi:10.3390/cryst14020117","chicago":"Milaege, Dennis, Niklas Eschemann, Kay-Peter Hoyer, and Mirko Schaper. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” Crystals 14, no. 2 (2024). https://doi.org/10.3390/cryst14020117.","ieee":"D. Milaege, N. Eschemann, K.-P. Hoyer, and M. Schaper, “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion,” Crystals, vol. 14, no. 2, Art. no. 117, 2024, doi: 10.3390/cryst14020117."},"department":[{"_id":"158"},{"_id":"321"}],"user_id":"35461","_id":"52738","article_number":"117","type":"journal_article","status":"public","date_created":"2024-03-22T13:46:37Z","publisher":"MDPI AG","title":"Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion","issue":"2","quality_controlled":"1","year":"2024","language":[{"iso":"eng"}],"keyword":["Inorganic Chemistry","Condensed Matter Physics","General Materials Science","General Chemical Engineering"],"publication":"Crystals","abstract":[{"text":"Through tailoring the geometry and design of biomaterials, additive manufacturing is revolutionizing the production of metallic patient-specific implants, e.g., the Ti-6Al-7Nb alloy. Unfortunately, studies investigating this alloy showed that additively produced samples exhibit anisotropic microstructures. This anisotropy compromises the mechanical properties and complicates the loading state in the implant. Moreover, the minimum requirements as specified per designated standards such as ISO 5832-11 are not met. The remedy to this problem is performing a conventional heat treatment. As this route requires energy, infrastructure, labor, and expertise, which in turn mean time and money, many of the additive manufacturing benefits are negated. Thus, the goal of this work was to achieve better isotropy by applying only adapted additive manufacturing process parameters, specifically focusing on the build orientations. In this work, samples orientated in 90°, 45°, and 0° directions relative to the building platform were manufactured and tested. These tests included mechanical (tensile and fatigue tests) as well as microstructural analyses (SEM and EBSD). Subsequently, the results of these tests such as fractography were correlated with the acquired mechanical properties. These showed that 90°-aligned samples performed best under fatigue load and that all requirements specified by the standard regarding monotonic load were met.","lang":"eng"}]},{"citation":{"apa":"Mallow, S., Broer, J., Milkereit, B., Grydin, O., Hoyer, K.-P., Garthe, K.-U., Milaege, D., Boyko, V., Schaper, M., & Kessler, O. (2024). Process chain of a twin-roll cast aluminium-copper-lithium alloy. Production Engineering. https://doi.org/10.1007/s11740-024-01322-x","short":"S. Mallow, J. Broer, B. Milkereit, O. Grydin, K.-P. Hoyer, K.-U. Garthe, D. Milaege, V. Boyko, M. Schaper, O. Kessler, Production Engineering (2024).","mla":"Mallow, Sina, et al. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” Production Engineering, Springer Science and Business Media LLC, 2024, doi:10.1007/s11740-024-01322-x.","bibtex":"@article{Mallow_Broer_Milkereit_Grydin_Hoyer_Garthe_Milaege_Boyko_Schaper_Kessler_2024, title={Process chain of a twin-roll cast aluminium-copper-lithium alloy}, DOI={10.1007/s11740-024-01322-x}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Mallow, Sina and Broer, Jette and Milkereit, Benjamin and Grydin, Olexandr and Hoyer, Kay-Peter and Garthe, Kai-Uwe and Milaege, Dennis and Boyko, Viktoriya and Schaper, Mirko and Kessler, Olaf}, year={2024} }","ama":"Mallow S, Broer J, Milkereit B, et al. Process chain of a twin-roll cast aluminium-copper-lithium alloy. Production Engineering. Published online 2024. doi:10.1007/s11740-024-01322-x","chicago":"Mallow, Sina, Jette Broer, Benjamin Milkereit, Olexandr Grydin, Kay-Peter Hoyer, Kai-Uwe Garthe, Dennis Milaege, Viktoriya Boyko, Mirko Schaper, and Olaf Kessler. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” Production Engineering, 2024. https://doi.org/10.1007/s11740-024-01322-x.","ieee":"S. Mallow et al., “Process chain of a twin-roll cast aluminium-copper-lithium alloy,” Production Engineering, 2024, doi: 10.1007/s11740-024-01322-x."},"year":"2024","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0944-6524","1863-7353"]},"doi":"10.1007/s11740-024-01322-x","title":"Process chain of a twin-roll cast aluminium-copper-lithium alloy","author":[{"last_name":"Mallow","full_name":"Mallow, Sina","first_name":"Sina"},{"first_name":"Jette","last_name":"Broer","full_name":"Broer, Jette"},{"full_name":"Milkereit, Benjamin","last_name":"Milkereit","first_name":"Benjamin"},{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer"},{"last_name":"Garthe","orcid":"0000-0003-0741-3812","full_name":"Garthe, Kai-Uwe","id":"11199","first_name":"Kai-Uwe"},{"last_name":"Milaege","full_name":"Milaege, Dennis","id":"35461","first_name":"Dennis"},{"first_name":"Viktoriya","last_name":"Boyko","full_name":"Boyko, Viktoriya"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"},{"full_name":"Kessler, Olaf","last_name":"Kessler","first_name":"Olaf"}],"date_created":"2024-12-02T13:43:15Z","publisher":"Springer Science and Business Media LLC","date_updated":"2024-12-02T13:46:39Z","status":"public","abstract":[{"lang":"eng","text":"AbstractRolling processes of conventional cast Al-Li alloys quickly reach their limits due to relatively poor material formability. This can be overcome by using twin-roll casting to produce thin sheets. Further thermomechanical treatment, including hot or cold rolling, and heat treatment can adjust the mechanical properties of twin-roll cast Al-Li sheets. The whole manufacturing chain requires detailed knowledge of the precipitation and dissolution behavior during heating, soaking and cooling, to purposefully select any process parameters. This study shows the process chain of a twin-roll cast Al–Cu–Li alloy achieving a hardness of around 180 HV1 by adapting the heat treatment parameters for homogenisation, hot rolling and age hardening. Both hardness and microstructure evolution are visualised along the process chain."}],"type":"journal_article","publication":"Production Engineering","language":[{"iso":"eng"}],"user_id":"48411","department":[{"_id":"9"},{"_id":"158"},{"_id":"321"}],"_id":"57540"},{"year":"2023","quality_controlled":"1","issue":"11","title":"Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach","publisher":"MDPI AG","date_created":"2023-11-21T15:29:49Z","abstract":[{"text":"The effect of plaque deposition (atherosclerosis) on blood flow behaviour is investigated via computational fluid dynamics and structural mechanics simulations. To mitigate the narrowing of coronary artery atherosclerosis (stenosis), the computational modelling of auxetic and non-auxetic stents was performed in this study to minimise or even avoid these deposition agents in the future. Computational modelling was performed in unrestricted (open) conditions and restricted (in an artery) conditions. Finally, stent designs were produced by additive manufacturing, and mechanical testing of the stents was undertaken. Auxetic stent 1 and auxetic stent 2 exhibit very little foreshortening and radial recoil in unrestricted deployment conditions compared to non-auxetic stent 3. However, stent 2 shows structural instability (strut failure) during unrestricted deployment conditions. For the restricted deployment condition, stent 1 shows a higher radial recoil compared to stent 3. In the tensile test simulations, short elongation for stent 1 due to strut failure is demonstrated, whereas no structural instability is noticed for stent 2 and stent 3 until 0.5 (mm/mm) strain. The as-built samples show a significant thickening of the struts of the stents resulting in short elongations during tensile testing compared to the simulations (stent 2 and stent 3). A modelling framework for the stent deployment system that enables the selection of appropriate stent designs before in vivo testing is required. This leads to the acceleration of the development process and a reduction in time, resulting in less material wastage. The modelling framework shall be useful for doctors designing patient-specific stents.","lang":"eng"}],"publication":"Crystals","keyword":["Inorganic Chemistry","Condensed Matter Physics","General Materials Science","General Chemical Engineering"],"language":[{"iso":"eng"}],"citation":{"ama":"Pramanik S, Milaege D, Hein M, Hoyer K-P, Schaper M. Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach. Crystals. 2023;13(11). doi:10.3390/cryst13111592","chicago":"Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Kay-Peter Hoyer, and Mirko Schaper. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals 13, no. 11 (2023). https://doi.org/10.3390/cryst13111592.","ieee":"S. Pramanik, D. Milaege, M. Hein, K.-P. Hoyer, and M. Schaper, “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach,” Crystals, vol. 13, no. 11, Art. no. 1592, 2023, doi: 10.3390/cryst13111592.","apa":"Pramanik, S., Milaege, D., Hein, M., Hoyer, K.-P., & Schaper, M. (2023). Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach. Crystals, 13(11), Article 1592. https://doi.org/10.3390/cryst13111592","bibtex":"@article{Pramanik_Milaege_Hein_Hoyer_Schaper_2023, title={Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach}, volume={13}, DOI={10.3390/cryst13111592}, number={111592}, journal={Crystals}, publisher={MDPI AG}, author={Pramanik, Sudipta and Milaege, Dennis and Hein, Maxwell and Hoyer, Kay-Peter and Schaper, Mirko}, year={2023} }","short":"S. Pramanik, D. Milaege, M. Hein, K.-P. Hoyer, M. Schaper, Crystals 13 (2023).","mla":"Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:10.3390/cryst13111592."},"intvolume":" 13","publication_status":"published","publication_identifier":{"issn":["2073-4352"]},"doi":"10.3390/cryst13111592","date_updated":"2023-11-21T15:30:57Z","author":[{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"full_name":"Milaege, Dennis","last_name":"Milaege","first_name":"Dennis"},{"first_name":"Maxwell","orcid":"0000-0002-3732-2236","last_name":"Hein","id":"52771","full_name":"Hein, Maxwell"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Mirko","id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper"}],"volume":13,"status":"public","type":"journal_article","article_number":"1592","_id":"49107","user_id":"48411","department":[{"_id":"9"},{"_id":"158"}]},{"project":[{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"}],"_id":"43031","user_id":"32340","department":[{"_id":"156"},{"_id":"158"}],"type":"conference","status":"public","date_updated":"2024-03-14T15:22:17Z","author":[{"first_name":"Thomas","last_name":"Borgert","full_name":"Borgert, Thomas","id":"83141"},{"last_name":"Neuser","full_name":"Neuser, Moritz","id":"32340","first_name":"Moritz"},{"last_name":"Wiens","full_name":"Wiens, Eugen","id":"7888","first_name":"Eugen"},{"first_name":"Olexandr","last_name":"Grydin","id":"43822","full_name":"Grydin, Olexandr"},{"first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner","id":"233"},{"first_name":"Mirko","id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper"}],"volume":25,"doi":"10.21741/9781644902417-24","conference":{"start_date":"02.04.2023","name":"20th International Conference on Sheet Metal","location":"Nürnberg","end_date":"05.04.2023"},"publication_status":"published","publication_identifier":{"issn":["2474-395X"]},"citation":{"chicago":"Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.","ieee":"T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 187–194, doi: 10.21741/9781644902417-24.","ama":"Borgert T, Neuser M, Wiens E, Grydin O, Homberg W, Schaper M. Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy. In: Materials Research Proceedings. Vol 25. Materials Research Forum LLC; 2023:187-194. doi:10.21741/9781644902417-24","bibtex":"@inproceedings{Borgert_Neuser_Wiens_Grydin_Homberg_Schaper_2023, title={Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy}, volume={25}, DOI={10.21741/9781644902417-24}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Borgert, Thomas and Neuser, Moritz and Wiens, Eugen and Grydin, Olexandr and Homberg, Werner and Schaper, Mirko}, year={2023}, pages={187–194} }","short":"T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, M. Schaper, in: Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 187–194.","mla":"Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” Materials Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.","apa":"Borgert, T., Neuser, M., Wiens, E., Grydin, O., Homberg, W., & Schaper, M. (2023). Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy. Materials Research Proceedings, 25, 187–194. https://doi.org/10.21741/9781644902417-24"},"intvolume":" 25","page":"187-194","language":[{"iso":"eng"}],"publication":"Materials Research Proceedings","abstract":[{"text":"Abstract. Requirements of multi-material construction involve adjustments to standard joining techniques. Especially the growing importance of integral cast components poses additional engineering challenges for the industry. One approach to achieve these goals are adaptable joining elements formed by friction spinning. This approach uses friction-induced heat to form customisable joining elements to join sheets for different boundary conditions, even for brittle cast materials. It is possible to react immediately to adapt to the joining process inline and reduce the amount of different joining elements. As the joining partner serve casting plates of the aluminium casting alloy EN AC–AlSi9, which is processed in the sand casting. Joining hypoeutectic AlSi alloys constitutes a challenge because the brittle character of these cause cracks in the joint during conventional mechanical joining. Furthermore, the friction-induced heat of the novel joining process causes a finer microstructure in the hypoeutectic AlSi9 casting alloy. In particular, the eutectic Si is more fine-grained, resulting in higher joint ductility. This study indicates the joining suitability of a hypoeutectic aluminium casting alloy in combination with adaptive manufactured additional joining elements. Here, various mechanical and microstructural investigations validate the influence of the thermomechanical joining technique. In conclusion, the potential of this joining process is presented regarding the joinability of cast aluminium components. ","lang":"eng"}],"publisher":"Materials Research Forum LLC","date_created":"2023-03-16T14:59:01Z","title":"Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy","quality_controlled":"1","year":"2023"},{"date_updated":"2024-03-14T15:21:38Z","volume":7,"author":[{"first_name":"Moritz","last_name":"Neuser","full_name":"Neuser, Moritz","id":"32340"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"},{"first_name":"Olexandr","id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin"}],"doi":"10.3390/jmmp7040132","publication_identifier":{"issn":["2504-4494"]},"publication_status":"published","intvolume":" 7","citation":{"ama":"Neuser M, Schaper M, Grydin O. Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing. 2023;7(4). doi:10.3390/jmmp7040132","ieee":"M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132.","chicago":"Neuser, Moritz, Mirko Schaper, and Olexandr Grydin. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040132.","bibtex":"@article{Neuser_Schaper_Grydin_2023, title={Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process}, volume={7}, DOI={10.3390/jmmp7040132}, number={4132}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Neuser, Moritz and Schaper, Mirko and Grydin, Olexandr}, year={2023} }","mla":"Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.","short":"M. Neuser, M. Schaper, O. Grydin, Journal of Manufacturing and Materials Processing 7 (2023).","apa":"Neuser, M., Schaper, M., & Grydin, O. (2023). Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing, 7(4), Article 132. https://doi.org/10.3390/jmmp7040132"},"_id":"52405","project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"}],"department":[{"_id":"158"}],"user_id":"32340","article_number":"132","type":"journal_article","status":"public","publisher":"MDPI AG","date_created":"2024-03-08T16:09:27Z","title":"Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process","quality_controlled":"1","issue":"4","year":"2023","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"language":[{"iso":"eng"}],"publication":"Journal of Manufacturing and Materials Processing","abstract":[{"text":"Multi-material designs (MMD) are more frequently used in the automotive industry. Hereby, the combination of different materials, metal sheets, or cast components, is mechanically joined, often by forming joining processes. The cast components mostly used are high-strength, age-hardenable aluminium alloys of the Al–Si system. Here, the low ductility of the AlSi alloys constitutes a challenge because their brittle nature causes cracks during the joining process. However, by using suitable solidification conditions, it is possible to achieve a microstructure with improved mechanical and joining properties. For this study, we used the twin-roll casting process (TRC) with water-cooled rollers to manufacture the hypoeutectic AlSi10Mg for the first time. Hereby, high solidification rates are realisable, which introduces a microstructure that is about four times finer than in the sand casting process. In particular, it is shown that a fine microstructure close to the modification with Na or Sr is achieved by the high solidification rate in the TRC process without using these elements. Based on this, the mechanical properties increase, and especially the ductility is enhanced. Subsequent joining investigations validate the positive influence of a high solidification rate since cracks in joints can be avoided. Finally, a microstructure-property-joint suitability correlation is presented.","lang":"eng"}]},{"year":"2023","issue":"5","quality_controlled":"1","title":"Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates","date_created":"2023-10-02T06:46:53Z","publisher":"MDPI AG","abstract":[{"lang":"eng","text":"Consistent lightweight construction in the area of vehicle manufacturing requires the increased use of multi-material combinations. This, in turn, requires an adaptation of standard joining techniques. In multi-material combinations, the importance of integral cast components, in particular, is increasing and poses additional technical challenges for the industry. One approach to solve these challenges is adaptable joining elements manufactured by a thermomechanical forming process. By applying an incremental and thermomechanical joining process, it is possible to react immediately and adapt the joining process inline to reduce the number of different joining elements. In the investigation described in this publication, cast plates made of the cast aluminium alloy EN AC-AlSi9 serve as joining partners, which are processed by sand casting. The joining process of hypoeutectic AlSi alloys is challenging as their brittle character leads to cracks in the joint during conventional mechanical joining. To solve this, the frictional heat of the novel joining process applied can provide a finer microstructure in the hypoeutectic AlSi9 cast alloy. In detail, its Si is finer-grained, resulting in higher ductility of the joint. This study reveals the thermomechanical joining suitability of a hypoeutectic cast aluminium alloy in combination with adaptively manufactured auxiliary joining elements."}],"publication":"Journal of Manufacturing and Materials Processing","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"citation":{"ama":"Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing. 2023;7(5). doi:10.3390/jmmp7050169","chicago":"Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.","ieee":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi: 10.3390/jmmp7050169.","apa":"Borgert, T., Neuser, M., Hoyer, K.-P., Homberg, W., & Schaper, M. (2023). Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing, 7(5), Article 169. https://doi.org/10.3390/jmmp7050169","short":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, M. Schaper, Journal of Manufacturing and Materials Processing 7 (2023).","mla":"Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.","bibtex":"@article{Borgert_Neuser_Hoyer_Homberg_Schaper_2023, title={Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates}, volume={7}, DOI={10.3390/jmmp7050169}, number={5169}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borgert, Thomas and Neuser, Moritz and Hoyer, Kay-Peter and Homberg, Werner and Schaper, Mirko}, year={2023} }"},"intvolume":" 7","publication_status":"published","publication_identifier":{"issn":["2504-4494"]},"doi":"10.3390/jmmp7050169","author":[{"id":"83141","full_name":"Borgert, Thomas","last_name":"Borgert","first_name":"Thomas"},{"first_name":"Moritz","last_name":"Neuser","full_name":"Neuser, Moritz","id":"32340"},{"last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411","first_name":"Kay-Peter"},{"last_name":"Homberg","id":"233","full_name":"Homberg, Werner","first_name":"Werner"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"volume":7,"date_updated":"2024-03-14T15:22:06Z","status":"public","type":"journal_article","article_number":"169","article_type":"original","user_id":"32340","department":[{"_id":"156"},{"_id":"158"}],"project":[{"name":"TRR 285 – C03: TRR 285 - Subproject C03","_id":"147"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"}],"_id":"47535"},{"title":"Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy","doi":"10.1007/978-3-031-41341-4_61","publisher":"Springer Nature Switzerland","date_updated":"2024-03-14T15:21:12Z","author":[{"first_name":"Olexandr","full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin"},{"last_name":"Neuser","id":"32340","full_name":"Neuser, Moritz","first_name":"Moritz"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"date_created":"2024-03-08T16:11:21Z","place":"Cham","year":"2023","citation":{"apa":"Grydin, O., Neuser, M., & Schaper, M. (2023). Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy. Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). https://doi.org/10.1007/978-3-031-41341-4_61","short":"O. Grydin, M. Neuser, M. Schaper, in: Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, Cham, 2023.","bibtex":"@inproceedings{Grydin_Neuser_Schaper_2023, place={Cham}, title={Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy}, DOI={10.1007/978-3-031-41341-4_61}, booktitle={ Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France)}, publisher={Springer Nature Switzerland}, author={Grydin, Olexandr and Neuser, Moritz and Schaper, Mirko}, year={2023} }","mla":"Grydin, Olexandr, et al. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_61.","ama":"Grydin O, Neuser M, Schaper M. Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy. In: Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_61","chicago":"Grydin, Olexandr, Moritz Neuser, and Mirko Schaper. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” In Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_61.","ieee":"O. Grydin, M. Neuser, and M. Schaper, “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy,” 2023, doi: 10.1007/978-3-031-41341-4_61."},"publication_identifier":{"issn":["2195-4356","2195-4364"],"isbn":["9783031413407","9783031413414"]},"quality_controlled":"1","publication_status":"published","language":[{"iso":"eng"}],"_id":"52406","project":[{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"}],"department":[{"_id":"158"}],"user_id":"32340","status":"public","publication":" Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France)","type":"conference"},{"publication_status":"published","publication_identifier":{"isbn":["9783031225314","9783031225321"],"issn":["2367-1181","2367-1696"]},"citation":{"apa":"Grydin, O., Garthe, K.-U., Yuan, X., Broer, J., Keßler, O., Králík, R., Cieslar, M., & Schaper, M. (2023). Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips. In S. Broek (Ed.), Light Metals 2023 (pp. 1031–1037). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-22532-1_137","mla":"Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips.” Light Metals 2023, edited by Stephan Broek, Springer Nature Switzerland, 2023, pp. 1031–37, doi:10.1007/978-3-031-22532-1_137.","bibtex":"@inbook{Grydin_Garthe_Yuan_Broer_Keßler_Králík_Cieslar_Schaper_2023, place={Cham}, series={The Minerals, Metals & Materials Series.}, title={Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips}, DOI={10.1007/978-3-031-22532-1_137}, booktitle={Light Metals 2023}, publisher={Springer Nature Switzerland}, author={Grydin, Olexandr and Garthe, Kai-Uwe and Yuan, Xueyang and Broer, Jette and Keßler, Olaf and Králík, Rostislav and Cieslar, Miroslav and Schaper, Mirko}, editor={Broek, Stephan}, year={2023}, pages={1031–1037}, collection={The Minerals, Metals & Materials Series.} }","short":"O. Grydin, K.-U. Garthe, X. Yuan, J. Broer, O. Keßler, R. Králík, M. Cieslar, M. Schaper, in: S. Broek (Ed.), Light Metals 2023, Springer Nature Switzerland, Cham, 2023, pp. 1031–1037.","ama":"Grydin O, Garthe K-U, Yuan X, et al. Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips. In: Broek S, ed. Light Metals 2023. The Minerals, Metals & Materials Series. Springer Nature Switzerland; 2023:1031-1037. doi:10.1007/978-3-031-22532-1_137","chicago":"Grydin, Olexandr, Kai-Uwe Garthe, Xueyang Yuan, Jette Broer, Olaf Keßler, Rostislav Králík, Miroslav Cieslar, and Mirko Schaper. “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips.” In Light Metals 2023, edited by Stephan Broek, 1031–37. The Minerals, Metals & Materials Series. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-22532-1_137.","ieee":"O. Grydin et al., “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips,” in Light Metals 2023, S. Broek, Ed. Cham: Springer Nature Switzerland, 2023, pp. 1031–1037."},"page":"1031-1037","place":"Cham","author":[{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"first_name":"Kai-Uwe","id":"11199","full_name":"Garthe, Kai-Uwe","last_name":"Garthe","orcid":"0000-0003-0741-3812"},{"full_name":"Yuan, Xueyang","last_name":"Yuan","first_name":"Xueyang"},{"first_name":"Jette","last_name":"Broer","full_name":"Broer, Jette"},{"full_name":"Keßler, Olaf","last_name":"Keßler","first_name":"Olaf"},{"full_name":"Králík, Rostislav","last_name":"Králík","first_name":"Rostislav"},{"first_name":"Miroslav","last_name":"Cieslar","full_name":"Cieslar, Miroslav"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"date_updated":"2023-04-08T17:30:37Z","main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-031-22532-1_137"}],"doi":"10.1007/978-3-031-22532-1_137","type":"book_chapter","status":"public","editor":[{"first_name":"Stephan","full_name":"Broek, Stephan","last_name":"Broek"}],"series_title":"The Minerals, Metals & Materials Series.","user_id":"43822","department":[{"_id":"158"},{"_id":"321"}],"_id":"41959","year":"2023","date_created":"2023-02-10T11:21:35Z","publisher":"Springer Nature Switzerland","title":"Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips","publication":"Light Metals 2023","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"department":[{"_id":"9"},{"_id":"158"}],"user_id":"43720","_id":"41492","status":"public","abstract":[{"text":"The current investigation shows the feasibility of 316L steel powder production via three different argon gas atomisation routes (closed coupled atomisation, free fall atomisation with and without hot gas), along with subsequent sample production by laser powder bed fusion (PBF-LB). Here, a mixture of pure Fe and atomised 316L steel powder is used for PBF-LB to induce a chemical composition gradient in the microstructure. Optical microscopy and μ-CT investigations proved that the samples processed by PBF-LB exhibit very little porosity. Combined EBSD-EDS measurements show the chemical composition gradient leading to the formation of a local fcc-structure. Upon heat treatment (1100 °C, 14 h), the chemical composition is homogeneous throughout the microstructure. A moderate decrease (1060 to 985 MPa) in the sample’s ultimate tensile strength (UTS) is observed after heat treatment. However, the total elongation of the as-built and heat-treated samples remains the same (≈22%). Similarly, a slight decrease in the hardness from 341 to 307 HV1 is observed upon heat treatment.","lang":"eng"}],"publication":"Powders","type":"journal_article","doi":"10.3390/powders2010005","title":"Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy","volume":2,"author":[{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"last_name":"Andreiev","full_name":"Andreiev, Anatolii","id":"50215","first_name":"Anatolii"},{"first_name":"Kay-Peter","id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"},{"orcid":"0000-0002-0827-9654","last_name":"Krüger","id":"44307","full_name":"Krüger, Jan Tobias","first_name":"Jan Tobias"},{"last_name":"Hengsbach","full_name":"Hengsbach, Florian","first_name":"Florian"},{"last_name":"Kircheis","full_name":"Kircheis, Alexander","first_name":"Alexander"},{"first_name":"Weiyu","full_name":"Zhao, Weiyu","last_name":"Zhao"},{"full_name":"Fischer-Bühner, Jörg","last_name":"Fischer-Bühner","first_name":"Jörg"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"date_created":"2023-02-02T14:24:33Z","date_updated":"2023-06-01T14:22:00Z","publisher":"MDPI AG","intvolume":" 2","page":"59-74","citation":{"bibtex":"@article{Pramanik_Andreiev_Hoyer_Krüger_Hengsbach_Kircheis_Zhao_Fischer-Bühner_Schaper_2023, title={Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy}, volume={2}, DOI={10.3390/powders2010005}, number={1}, journal={Powders}, publisher={MDPI AG}, author={Pramanik, Sudipta and Andreiev, Anatolii and Hoyer, Kay-Peter and Krüger, Jan Tobias and Hengsbach, Florian and Kircheis, Alexander and Zhao, Weiyu and Fischer-Bühner, Jörg and Schaper, Mirko}, year={2023}, pages={59–74} }","short":"S. Pramanik, A. Andreiev, K.-P. Hoyer, J.T. Krüger, F. Hengsbach, A. Kircheis, W. Zhao, J. Fischer-Bühner, M. Schaper, Powders 2 (2023) 59–74.","mla":"Pramanik, Sudipta, et al. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders, vol. 2, no. 1, MDPI AG, 2023, pp. 59–74, doi:10.3390/powders2010005.","apa":"Pramanik, S., Andreiev, A., Hoyer, K.-P., Krüger, J. T., Hengsbach, F., Kircheis, A., Zhao, W., Fischer-Bühner, J., & Schaper, M. (2023). Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy. Powders, 2(1), 59–74. https://doi.org/10.3390/powders2010005","ieee":"S. Pramanik et al., “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy,” Powders, vol. 2, no. 1, pp. 59–74, 2023, doi: 10.3390/powders2010005.","chicago":"Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, Jan Tobias Krüger, Florian Hengsbach, Alexander Kircheis, Weiyu Zhao, Jörg Fischer-Bühner, and Mirko Schaper. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders 2, no. 1 (2023): 59–74. https://doi.org/10.3390/powders2010005.","ama":"Pramanik S, Andreiev A, Hoyer K-P, et al. Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy. Powders. 2023;2(1):59-74. doi:10.3390/powders2010005"},"year":"2023","issue":"1","quality_controlled":"1","publication_identifier":{"issn":["2674-0516"]},"publication_status":"published"},{"doi":"10.1016/j.vacuum.2023.112043","date_updated":"2023-06-01T14:22:15Z","author":[{"last_name":"Šlapáková","full_name":"Šlapáková, Michaela","first_name":"Michaela"},{"first_name":"Barbora","full_name":"Kihoulou, Barbora","last_name":"Kihoulou"},{"first_name":"Jozef","full_name":"Veselý, Jozef","last_name":"Veselý"},{"first_name":"Peter","full_name":"Minárik, Peter","last_name":"Minárik"},{"first_name":"Klaudia","full_name":"Fekete, Klaudia","last_name":"Fekete"},{"first_name":"Michal","full_name":"Knapek, Michal","last_name":"Knapek"},{"last_name":"Králík","full_name":"Králík, Rostislav","first_name":"Rostislav"},{"first_name":"Olexandr","id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin"},{"first_name":"Mykhailo","last_name":"Stolbchenko","full_name":"Stolbchenko, Mykhailo"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"volume":212,"citation":{"ieee":"M. Šlapáková et al., “3D-structure of intermetallic interface layer in Al–steel clad material,” Vacuum, vol. 212, Art. no. 112043, 2023, doi: 10.1016/j.vacuum.2023.112043.","chicago":"Šlapáková, Michaela, Barbora Kihoulou, Jozef Veselý, Peter Minárik, Klaudia Fekete, Michal Knapek, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “3D-Structure of Intermetallic Interface Layer in Al–Steel Clad Material.” Vacuum 212 (2023). https://doi.org/10.1016/j.vacuum.2023.112043.","ama":"Šlapáková M, Kihoulou B, Veselý J, et al. 3D-structure of intermetallic interface layer in Al–steel clad material. Vacuum. 2023;212. doi:10.1016/j.vacuum.2023.112043","apa":"Šlapáková, M., Kihoulou, B., Veselý, J., Minárik, P., Fekete, K., Knapek, M., Králík, R., Grydin, O., Stolbchenko, M., & Schaper, M. (2023). 3D-structure of intermetallic interface layer in Al–steel clad material. Vacuum, 212, Article 112043. https://doi.org/10.1016/j.vacuum.2023.112043","short":"M. Šlapáková, B. Kihoulou, J. Veselý, P. Minárik, K. Fekete, M. Knapek, R. Králík, O. Grydin, M. Stolbchenko, M. Schaper, Vacuum 212 (2023).","bibtex":"@article{Šlapáková_Kihoulou_Veselý_Minárik_Fekete_Knapek_Králík_Grydin_Stolbchenko_Schaper_2023, title={3D-structure of intermetallic interface layer in Al–steel clad material}, volume={212}, DOI={10.1016/j.vacuum.2023.112043}, number={112043}, journal={Vacuum}, publisher={Elsevier BV}, author={Šlapáková, Michaela and Kihoulou, Barbora and Veselý, Jozef and Minárik, Peter and Fekete, Klaudia and Knapek, Michal and Králík, Rostislav and Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}, year={2023} }","mla":"Šlapáková, Michaela, et al. “3D-Structure of Intermetallic Interface Layer in Al–Steel Clad Material.” Vacuum, vol. 212, 112043, Elsevier BV, 2023, doi:10.1016/j.vacuum.2023.112043."},"intvolume":" 212","publication_status":"published","publication_identifier":{"issn":["0042-207X"]},"article_type":"original","article_number":"112043","_id":"43441","user_id":"43720","department":[{"_id":"158"}],"status":"public","type":"journal_article","title":"3D-structure of intermetallic interface layer in Al–steel clad material","publisher":"Elsevier BV","date_created":"2023-04-08T17:24:40Z","year":"2023","quality_controlled":"1","keyword":["Al-steel clad","twin-roll casting","3D characterization","atomic force microscopy","diffusion direction","surface growth"],"language":[{"iso":"eng"}],"abstract":[{"text":"This paper reveals the 3D character of the intermetallic layer at the aluminum–steel interface which pops\r\nup above the original sample surface during annealing. Popping out of the intermetallics was proven using\r\natomic force microscopy. The phase expands out of the plane due to the exothermic formation of the Al5Fe2\r\nphase and the feasibility of surface diffusion. Milling by a focused ion beam enabled the comparison of the\r\nchemical composition of the surface layer with the bulk interface, showing no difference. The growth direction\r\nis both towards aluminum and steel — the main diffusion flux is from aluminum towards steel, and the new\r\nintermetallic phase emerges at the steel side. The shortage of Al atoms causes a shift of the intermetallic as a\r\nwhole towards aluminum.","lang":"eng"}],"publication":"Vacuum"},{"_id":"44078","department":[{"_id":"158"},{"_id":"146"},{"_id":"219"}],"user_id":"43720","keyword":["Industrial and Manufacturing Engineering","Metals and Alloys","Computer Science Applications","Modeling and Simulation","Ceramics and Composites"],"article_number":"117991","language":[{"iso":"eng"}],"publication":"Journal of Materials Processing Technology","type":"journal_article","status":"public","publisher":"Elsevier BV","date_updated":"2023-06-01T14:21:45Z","volume":317,"date_created":"2023-04-20T10:39:14Z","author":[{"last_name":"Andreiev","full_name":"Andreiev, Anatolii","id":"50215","first_name":"Anatolii"},{"first_name":"Kay-Peter","last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter"},{"full_name":"Hengsbach, Florian","last_name":"Hengsbach","first_name":"Florian"},{"first_name":"Michael","id":"35970","full_name":"Haase, Michael","last_name":"Haase"},{"first_name":"Lennart","last_name":"Tasche","full_name":"Tasche, Lennart","id":"71508"},{"first_name":"Kristina","full_name":"Duschik, Kristina","last_name":"Duschik"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"title":"Powder bed fusion of soft-magnetic iron-based alloys with high silicon content","doi":"10.1016/j.jmatprotec.2023.117991","publication_identifier":{"issn":["0924-0136"]},"quality_controlled":"1","publication_status":"published","year":"2023","intvolume":" 317","citation":{"apa":"Andreiev, A., Hoyer, K.-P., Hengsbach, F., Haase, M., Tasche, L., Duschik, K., & Schaper, M. (2023). Powder bed fusion of soft-magnetic iron-based alloys with high silicon content. Journal of Materials Processing Technology, 317, Article 117991. https://doi.org/10.1016/j.jmatprotec.2023.117991","bibtex":"@article{Andreiev_Hoyer_Hengsbach_Haase_Tasche_Duschik_Schaper_2023, title={Powder bed fusion of soft-magnetic iron-based alloys with high silicon content}, volume={317}, DOI={10.1016/j.jmatprotec.2023.117991}, number={117991}, journal={Journal of Materials Processing Technology}, publisher={Elsevier BV}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Hengsbach, Florian and Haase, Michael and Tasche, Lennart and Duschik, Kristina and Schaper, Mirko}, year={2023} }","mla":"Andreiev, Anatolii, et al. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” Journal of Materials Processing Technology, vol. 317, 117991, Elsevier BV, 2023, doi:10.1016/j.jmatprotec.2023.117991.","short":"A. Andreiev, K.-P. Hoyer, F. Hengsbach, M. Haase, L. Tasche, K. Duschik, M. Schaper, Journal of Materials Processing Technology 317 (2023).","ieee":"A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,” Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi: 10.1016/j.jmatprotec.2023.117991.","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Florian Hengsbach, Michael Haase, Lennart Tasche, Kristina Duschik, and Mirko Schaper. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” Journal of Materials Processing Technology 317 (2023). https://doi.org/10.1016/j.jmatprotec.2023.117991.","ama":"Andreiev A, Hoyer K-P, Hengsbach F, et al. Powder bed fusion of soft-magnetic iron-based alloys with high silicon content. Journal of Materials Processing Technology. 2023;317. doi:10.1016/j.jmatprotec.2023.117991"}},{"date_created":"2023-08-16T06:20:42Z","publisher":"Emerald","title":"Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples","issue":"6","quality_controlled":"1","year":"2023","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"publication":"Rapid Prototyping Journal","abstract":[{"lang":"eng","text":"\r\nPurpose\r\nThe purpose of this study is to investigate the manufacturability of Fe-3Si lattice structures and the resulting mechanical properties. This study could lead to the successful processing of squirrel cage conductors (a lattice structure by design) of an induction motor by additive manufacturing in the future.\r\n\r\n\r\nDesign/methodology/approach\r\nThe compression behaviour of two lattice structures where struts are arranged in a face-centred cubic position and vertical edges (FCCZ), and struts are placed at body-centred cubic (BCC) positions, prepared by laser powder bed fusion (LPBF), is explored. The experimental investigations are supported by finite element method (FEM) simulations.\r\n\r\n\r\nFindings\r\nThe FCCZ lattice structure presents a peak in the stress-strain curve, whereas the BCC lattice structure manifests a plateau. The vertical struts aligned along the compression direction lead to a significant increase in the load-carrying ability of FCCZ lattice structures compared to BCC lattice structures. This results in a peak in the stress-strain curve. However, the BCC lattice structure presents the bending of struts with diagonal struts carrying the major loads with struts near the faceplate receiving the least load. A high concentration of geometrically necessary dislocations (GNDs) near the grain boundaries along cell formation is observed in the microstructure.\r\n\r\n\r\nOriginality/value\r\nTo the best of the authors’ knowledge, this is the first study on additive manufacturing of Fe-3Si lattice structures. Currently, there are no investigations in the literature on the manufacturability and mechanical properties of Fe-3Si lattice structures.\r\n"}],"author":[{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"volume":29,"date_updated":"2023-08-16T06:29:57Z","doi":"10.1108/rpj-06-2022-0190","publication_status":"published","publication_identifier":{"issn":["1355-2546","1355-2546"]},"citation":{"mla":"Pramanik, Sudipta, et al. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping Journal, vol. 29, no. 6, Emerald, 2023, pp. 1257–69, doi:10.1108/rpj-06-2022-0190.","short":"S. Pramanik, K.-P. Hoyer, M. Schaper, Rapid Prototyping Journal 29 (2023) 1257–1269.","bibtex":"@article{Pramanik_Hoyer_Schaper_2023, title={Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples}, volume={29}, DOI={10.1108/rpj-06-2022-0190}, number={6}, journal={Rapid Prototyping Journal}, publisher={Emerald}, author={Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko}, year={2023}, pages={1257–1269} }","apa":"Pramanik, S., Hoyer, K.-P., & Schaper, M. (2023). Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples. Rapid Prototyping Journal, 29(6), 1257–1269. https://doi.org/10.1108/rpj-06-2022-0190","chicago":"Pramanik, Sudipta, Kay-Peter Hoyer, and Mirko Schaper. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping Journal 29, no. 6 (2023): 1257–69. https://doi.org/10.1108/rpj-06-2022-0190.","ieee":"S. Pramanik, K.-P. Hoyer, and M. Schaper, “Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples,” Rapid Prototyping Journal, vol. 29, no. 6, pp. 1257–1269, 2023, doi: 10.1108/rpj-06-2022-0190.","ama":"Pramanik S, Hoyer K-P, Schaper M. Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples. Rapid Prototyping Journal. 2023;29(6):1257-1269. doi:10.1108/rpj-06-2022-0190"},"intvolume":" 29","page":"1257-1269","user_id":"48411","department":[{"_id":"9"},{"_id":"158"}],"_id":"46503","type":"journal_article","status":"public"},{"status":"public","type":"journal_article","publication":"Advanced Engineering Materials","language":[{"iso":"eng"}],"keyword":["Condensed Matter Physics","General Materials Science"],"user_id":"48411","department":[{"_id":"9"},{"_id":"158"}],"_id":"46507","citation":{"chicago":"Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Anatolii Andreiev, Mirko Schaper, and Kay-Peter Hoyer. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” Advanced Engineering Materials 25, no. 14 (2023). https://doi.org/10.1002/adem.202201850.","ieee":"S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, and K.-P. Hoyer, “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures,” Advanced Engineering Materials, vol. 25, no. 14, 2023, doi: 10.1002/adem.202201850.","ama":"Pramanik S, Milaege D, Hein M, Andreiev A, Schaper M, Hoyer K-P. An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. Advanced Engineering Materials. 2023;25(14). doi:10.1002/adem.202201850","short":"S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, K.-P. Hoyer, Advanced Engineering Materials 25 (2023).","mla":"Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” Advanced Engineering Materials, vol. 25, no. 14, Wiley, 2023, doi:10.1002/adem.202201850.","bibtex":"@article{Pramanik_Milaege_Hein_Andreiev_Schaper_Hoyer_2023, title={An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures}, volume={25}, DOI={10.1002/adem.202201850}, number={14}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Pramanik, Sudipta and Milaege, Dennis and Hein, Maxwell and Andreiev, Anatolii and Schaper, Mirko and Hoyer, Kay-Peter}, year={2023} }","apa":"Pramanik, S., Milaege, D., Hein, M., Andreiev, A., Schaper, M., & Hoyer, K.-P. (2023). An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. Advanced Engineering Materials, 25(14). https://doi.org/10.1002/adem.202201850"},"intvolume":" 25","year":"2023","issue":"14","publication_status":"published","publication_identifier":{"issn":["1438-1656","1527-2648"]},"quality_controlled":"1","doi":"10.1002/adem.202201850","title":"An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures","author":[{"full_name":"Pramanik, Sudipta","last_name":"Pramanik","first_name":"Sudipta"},{"full_name":"Milaege, Dennis","last_name":"Milaege","first_name":"Dennis"},{"last_name":"Hein","orcid":"0000-0002-3732-2236","id":"52771","full_name":"Hein, Maxwell","first_name":"Maxwell"},{"last_name":"Andreiev","full_name":"Andreiev, Anatolii","id":"50215","first_name":"Anatolii"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"},{"first_name":"Kay-Peter","last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter"}],"date_created":"2023-08-16T06:27:19Z","volume":25,"date_updated":"2023-08-16T06:29:36Z","publisher":"Wiley"},{"date_updated":"2023-09-08T08:32:42Z","publisher":"transcript Verlag","date_created":"2023-09-08T08:28:27Z","author":[{"last_name":"Menge","id":"29240","full_name":"Menge, Dennis","first_name":"Dennis"},{"full_name":"Milaege, Dennis","last_name":"Milaege","first_name":"Dennis"},{"last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411","first_name":"Kay-Peter"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464","full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"title":"Case Study IV: Individualized Medical Technology using Additive Manufacturing","doi":"10.14361/9783839463772-007","publication_identifier":{"issn":["2703-1543","2703-1551"],"isbn":["9783837663778","9783839463772"]},"publication_status":"published","place":"Bielefeld, Germany","year":"2023","citation":{"mla":"Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:10.14361/9783839463772-007.","bibtex":"@inbook{Menge_Milaege_Hoyer_Schmid_Schaper_2023, place={Bielefeld, Germany}, title={Case Study IV: Individualized Medical Technology using Additive Manufacturing}, DOI={10.14361/9783839463772-007}, booktitle={Climate Protection, Resource Efficiency, and Sustainable Engineering}, publisher={transcript Verlag}, author={Menge, Dennis and Milaege, Dennis and Hoyer, Kay-Peter and Schmid, Hans-Joachim and Schaper, Mirko}, editor={Horwath, Illona and Schweizer, Swetlana}, year={2023} }","short":"D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.","apa":"Menge, D., Milaege, D., Hoyer, K.-P., Schmid, H.-J., & Schaper, M. (2023). Case Study IV: Individualized Medical Technology using Additive Manufacturing. In I. Horwath & S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag. https://doi.org/10.14361/9783839463772-007","ieee":"D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.","chicago":"Menge, Dennis, Dennis Milaege, Kay-Peter Hoyer, Hans-Joachim Schmid, and Mirko Schaper. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” In Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer. Bielefeld, Germany: transcript Verlag, 2023. https://doi.org/10.14361/9783839463772-007.","ama":"Menge D, Milaege D, Hoyer K-P, Schmid H-J, Schaper M. Case Study IV: Individualized Medical Technology using Additive Manufacturing. In: Horwath I, Schweizer S, eds. Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag; 2023. doi:10.14361/9783839463772-007"},"_id":"46870","department":[{"_id":"9"},{"_id":"158"},{"_id":"150"}],"user_id":"48411","language":[{"iso":"eng"}],"publication":"Climate Protection, Resource Efficiency, and Sustainable Engineering","type":"book_chapter","editor":[{"first_name":"Illona","last_name":"Horwath","full_name":"Horwath, Illona"},{"first_name":"Swetlana","full_name":"Schweizer, Swetlana","last_name":"Schweizer"}],"status":"public"},{"doi":"10.1007/s11661-023-07186-7","title":"Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution","date_created":"2023-09-18T11:43:28Z","author":[{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"id":"44307","full_name":"Krüger, Jan Tobias","orcid":"0000-0002-0827-9654","last_name":"Krüger","first_name":"Jan Tobias"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"},{"last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"}],"date_updated":"2023-09-18T11:44:04Z","publisher":"Springer Science and Business Media LLC","citation":{"ama":"Pramanik S, Krüger JT, Schaper M, Hoyer K-P. Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution. Metallurgical and Materials Transactions A. Published online 2023. doi:10.1007/s11661-023-07186-7","chicago":"Pramanik, Sudipta, Jan Tobias Krüger, Mirko Schaper, and Kay-Peter Hoyer. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, 2023. https://doi.org/10.1007/s11661-023-07186-7.","ieee":"S. Pramanik, J. T. Krüger, M. Schaper, and K.-P. Hoyer, “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution,” Metallurgical and Materials Transactions A, 2023, doi: 10.1007/s11661-023-07186-7.","short":"S. Pramanik, J.T. Krüger, M. Schaper, K.-P. Hoyer, Metallurgical and Materials Transactions A (2023).","bibtex":"@article{Pramanik_Krüger_Schaper_Hoyer_2023, title={Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution}, DOI={10.1007/s11661-023-07186-7}, journal={Metallurgical and Materials Transactions A}, publisher={Springer Science and Business Media LLC}, author={Pramanik, Sudipta and Krüger, Jan Tobias and Schaper, Mirko and Hoyer, Kay-Peter}, year={2023} }","mla":"Pramanik, Sudipta, et al. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, Springer Science and Business Media LLC, 2023, doi:10.1007/s11661-023-07186-7.","apa":"Pramanik, S., Krüger, J. T., Schaper, M., & Hoyer, K.-P. (2023). Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution. Metallurgical and Materials Transactions A. https://doi.org/10.1007/s11661-023-07186-7"},"year":"2023","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["1073-5623","1543-1940"]},"language":[{"iso":"eng"}],"keyword":["Metals and Alloys","Mechanics of Materials","Condensed Matter Physics"],"user_id":"48411","department":[{"_id":"9"},{"_id":"158"}],"_id":"47122","status":"public","abstract":[{"lang":"eng","text":"AbstractFeCo alloys are important materials used in pumps and motors in the offshore oil and gas drilling industry. These alloys are subjected to marine environments with a high NaCl concentration, therefore, corrosion and catastrophic failure are anticipated. So, the surface dissolution of additively manufactured FeCo samples is investigated in a quasi-in situ manner, in particular, the pitting corrosion in 5.0 wt pct NaCl solution. The local dissolution of the same sample region is monitored after 24, 72, and 168 hours. Here, the formation of rectangular and circular pits of ultra-fine dimensions (less than 0.5 µm) is observed with increasing immersion time. In addition, the formation of a corrosion-inhibiting surface layer is detected on the sample surface. Surface dissolution leads to a change in the surface structure, however, no change in grain shape or grain size is noticed. The surface topography after local dissolution is correlated to the grain orientation. Quasi-in situ analysis shows the preferential dissolution of high-angle grain boundaries (HAGBs) leading to a change in the fraction of HAGBs and low-angle grain boundaries fraction (LAGBs). For the FeCo sample, a potentiodynamic polarisation test reveals a corrosion potential (Ecorr) of − 0.475 V referred to the standard hydrogen electrode (SHE) and a corrosion exchange current density (icorr) of 0.0848 A/m2. Furthermore, quasi-in situ experiments showed that grains oriented along certain crystallographic directions are corroding more compared to other grains leading to a significant decrease in the local surface height. Grains with a plane normal close to the $$\\langle {1}00\\rangle$$\r\n \r\n ⟨\r\n 100\r\n ⟩\r\n \r\n direction reveal lower surface dissolution and higher corrosion resistance, whereas planes normal close to the $$\\langle {11}0\\rangle$$\r\n \r\n ⟨\r\n 110\r\n ⟩\r\n \r\n direction and the $$\\langle {111}\\rangle$$\r\n \r\n ⟨\r\n 111\r\n ⟩\r\n \r\n direction exhibit a higher surface dissolution."}],"type":"journal_article","publication":"Metallurgical and Materials Transactions A"},{"abstract":[{"text":"AbstractEfforts to enhance sustainability in all areas of life are increasing worldwide. In the field of manufacturing technology, a wide variety of approaches are being used to improve both resource and energy efficiency. Efficiency as well as sustainability can be improved by creating a circular economy or through energy-efficient recycling processes. As part of the interdisciplinary research group \"Light—Efficient—Mobile\" investigations on the energy-efficient friction-induced recycling process have been carried out at the department of Forming and Machining Technology at Paderborn University. E.g. using the friction-induced recycling process, different formless solid aluminum materials can be direct recycled into semi-finished products in an energy-efficient manner. The results of investigations with regard to the influence of the geometrical shape and filling rate of the aluminum particles to be recycled as well as the rotational speed of the continuously rotating wheel are explained in this paper. In addition to the recycling of aluminum chips, aluminum particles like powders from the field of additive manufacturing are processed. Based on these results, the future potentials of solid-state recycling processes and their contribution to the circular economy are discussed. The main focus here is on future interdisciplinary research projects to achieve circularity in the manufacturing of user-individual semi-finished products as well as the possibility to selectively adjust the product properties with the continuous recycling process.","lang":"eng"}],"publication":"International Journal of Material Forming","language":[{"iso":"eng"}],"keyword":["General Materials Science"],"year":"2023","issue":"6","quality_controlled":"1","title":"Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology","date_created":"2023-10-02T06:59:53Z","publisher":"Springer Science and Business Media LLC","status":"public","type":"journal_article","article_type":"original","article_number":"59","user_id":"15952","department":[{"_id":"156"},{"_id":"149"},{"_id":"321"},{"_id":"9"},{"_id":"158"}],"_id":"47536","citation":{"bibtex":"@article{Borgert_Milaege_Schweizer_Homberg_Schaper_Tröster_2023, title={Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology}, volume={16}, DOI={10.1007/s12289-023-01785-w}, number={659}, journal={International Journal of Material Forming}, publisher={Springer Science and Business Media LLC}, author={Borgert, Thomas and Milaege, Dennis and Schweizer, Swetlana and Homberg, Werner and Schaper, Mirko and Tröster, Thomas}, year={2023} }","short":"T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, T. Tröster, International Journal of Material Forming 16 (2023).","mla":"Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business Media LLC, 2023, doi:10.1007/s12289-023-01785-w.","apa":"Borgert, T., Milaege, D., Schweizer, S., Homberg, W., Schaper, M., & Tröster, T. (2023). Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology. International Journal of Material Forming, 16(6), Article 59. https://doi.org/10.1007/s12289-023-01785-w","ieee":"T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster, “Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology,” International Journal of Material Forming, vol. 16, no. 6, Art. no. 59, 2023, doi: 10.1007/s12289-023-01785-w.","chicago":"Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.","ama":"Borgert T, Milaege D, Schweizer S, Homberg W, Schaper M, Tröster T. Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology. International Journal of Material Forming. 2023;16(6). doi:10.1007/s12289-023-01785-w"},"intvolume":" 16","publication_status":"published","publication_identifier":{"issn":["1960-6206","1960-6214"]},"doi":"10.1007/s12289-023-01785-w","author":[{"first_name":"Thomas","last_name":"Borgert","full_name":"Borgert, Thomas","id":"83141"},{"first_name":"Dennis","last_name":"Milaege","full_name":"Milaege, Dennis"},{"id":"8938","full_name":"Schweizer, Swetlana","last_name":"Schweizer","first_name":"Swetlana"},{"id":"233","full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"}],"volume":16,"date_updated":"2025-06-06T08:18:51Z"},{"alternative_title":["Implementation of optimized surface slitting for eddy current loss reduction on the surface of an additively manufactured pemanent magnet rotor"],"language":[{"iso":"ger"}],"user_id":"35970","department":[{"_id":"146"},{"_id":"219"},{"_id":"158"}],"_id":"45360","status":"public","editor":[{"first_name":"Michael","full_name":"Kynast, Michael","last_name":"Kynast"},{"last_name":"Eichmann","full_name":"Eichmann, Michael","first_name":"Michael"},{"full_name":"Witt, Gerd","last_name":"Witt","first_name":"Gerd"}],"popular_science":"1","type":"book_chapter","publication":"Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023","doi":"https://doi.org/10.3139/9783446479425.001 ","title":"Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors","author":[{"last_name":"Haase","id":"35970","full_name":"Haase, Michael","first_name":"Michael"},{"last_name":"Bieber","full_name":"Bieber, Maximilian","first_name":"Maximilian"},{"first_name":"Frederik","last_name":"Tasche","full_name":"Tasche, Frederik"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer"},{"first_name":"Bernd","full_name":"Ponik, Bernd","last_name":"Ponik"},{"last_name":"Magyar","id":"97759","full_name":"Magyar, Balázs","first_name":"Balázs"}],"date_created":"2023-05-30T05:55:15Z","publisher":"Carl Hanser Verlag GmbH & Co. KG","date_updated":"2025-08-29T09:19:53Z","citation":{"ieee":"M. Haase et al., “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,” in Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag GmbH & Co. KG, 2023.","chicago":"Haase, Michael, Maximilian Bieber, Frederik Tasche, Mirko Schaper, Kay-Peter Hoyer, Bernd Ponik, and Balázs Magyar. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” In Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast, Michael Eichmann, and Gerd Witt. München: Carl Hanser Verlag GmbH & Co. KG, 2023. https://doi.org/10.3139/9783446479425.001 .","ama":"Haase M, Bieber M, Tasche F, et al. Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors. In: Kynast M, Eichmann M, Witt G, eds. Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023. Carl Hanser Verlag GmbH & Co. KG; 2023. doi:https://doi.org/10.3139/9783446479425.001 ","apa":"Haase, M., Bieber, M., Tasche, F., Schaper, M., Hoyer, K.-P., Ponik, B., & Magyar, B. (2023). Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors. In M. Kynast, M. Eichmann, & G. Witt (Eds.), Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023. Carl Hanser Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446479425.001 ","mla":"Haase, Michael, et al. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast et al., Carl Hanser Verlag GmbH & Co. KG, 2023, doi:https://doi.org/10.3139/9783446479425.001 .","short":"M. Haase, M. Bieber, F. Tasche, M. Schaper, K.-P. Hoyer, B. Ponik, B. Magyar, in: M. Kynast, M. Eichmann, G. Witt (Eds.), Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, Carl Hanser Verlag GmbH & Co. KG, München, 2023.","bibtex":"@inbook{Haase_Bieber_Tasche_Schaper_Hoyer_Ponik_Magyar_2023, place={München}, title={Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors}, DOI={https://doi.org/10.3139/9783446479425.001 }, booktitle={Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023}, publisher={Carl Hanser Verlag GmbH & Co. KG}, author={Haase, Michael and Bieber, Maximilian and Tasche, Frederik and Schaper, Mirko and Hoyer, Kay-Peter and Ponik, Bernd and Magyar, Balázs}, editor={Kynast, Michael and Eichmann, Michael and Witt, Gerd}, year={2023} }"},"year":"2023","place":"München","publication_status":"published","publication_identifier":{"eisbn":["978-3-446-47942-5"],"isbn":["978-3-446-47941-8"]}},{"language":[{"iso":"eng"}],"keyword":["Al-Li-based alloy","in-situ TEM","homogenization","phase transformation"],"abstract":[{"text":"Transformation of Fe- and Cu-rich primary phase particles was studied in an Al-Li-based alloy prepared by twin-roll casting. Thin foils for combined STEM and SEM experiments were prepared by electrolytic twin-jet polishing. They were in-situ heated in a TEM heating stage and observed at 200 kV in the JEOL JEM 2200FS electron microscope equipped with STEM HAADF and BF detectors and SEM BSE and SE detectors working both in composition and topographic modes. The resulting structures were combined with EDS mapping performed directly in the heating holder. Dissolution and transformation of Cu- and Fe-rich particles occur above 500 °C. EDS maps acquired on the foil cooled down to room temperature show that Cu and Fe are both still present in newly formed particles, most likely indicating the presence of the Al7Cu2Fe phase.","lang":"eng"}],"publication":"METAL 2022 Conference Proeedings","title":"HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY","date_created":"2023-01-12T09:39:41Z","publisher":"TANGER Ltd.","year":"2022","department":[{"_id":"158"},{"_id":"321"}],"user_id":"43822","_id":"36335","status":"public","type":"conference","conference":{"start_date":"2022-05-18","name":"Metal 2022","location":"Brno","end_date":"2022-05-19"},"doi":"10.37904/metal.2022.4438","main_file_link":[{"open_access":"1","url":"https://www.confer.cz/metal/2022/4438-homogenization-of-twin-roll-cast-al-li-based-alloy-studied-by-in-situ-electron-microscopy"}],"author":[{"first_name":"Miroslav","last_name":"CIESLAR","full_name":"CIESLAR, Miroslav"},{"first_name":"Barbora","full_name":"KŘIVSKÁ, Barbora","last_name":"KŘIVSKÁ"},{"full_name":"KRÁLÍK, Rostislav","last_name":"KRÁLÍK","first_name":"Rostislav"},{"first_name":"Lucia","last_name":"BAJTOŠOVÁ","full_name":"BAJTOŠOVÁ, Lucia"},{"last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822","first_name":"Olexandr"},{"first_name":"Mykhailo","last_name":"STOLBCHENKO","full_name":"STOLBCHENKO, Mykhailo"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"date_updated":"2023-01-12T09:44:17Z","oa":"1","citation":{"short":"M. CIESLAR, B. KŘIVSKÁ, R. KRÁLÍK, L. BAJTOŠOVÁ, O. Grydin, M. STOLBCHENKO, M. Schaper, in: METAL 2022 Conference Proeedings, TANGER Ltd., 2022.","mla":"CIESLAR, Miroslav, et al. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.” METAL 2022 Conference Proeedings, TANGER Ltd., 2022, doi:10.37904/metal.2022.4438.","bibtex":"@inproceedings{CIESLAR_KŘIVSKÁ_KRÁLÍK_BAJTOŠOVÁ_Grydin_STOLBCHENKO_Schaper_2022, title={HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY}, DOI={10.37904/metal.2022.4438}, booktitle={METAL 2022 Conference Proeedings}, publisher={TANGER Ltd.}, author={CIESLAR, Miroslav and KŘIVSKÁ, Barbora and KRÁLÍK, Rostislav and BAJTOŠOVÁ, Lucia and Grydin, Olexandr and STOLBCHENKO, Mykhailo and Schaper, Mirko}, year={2022} }","apa":"CIESLAR, M., KŘIVSKÁ, B., KRÁLÍK, R., BAJTOŠOVÁ, L., Grydin, O., STOLBCHENKO, M., & Schaper, M. (2022). HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY. METAL 2022 Conference Proeedings. Metal 2022, Brno. https://doi.org/10.37904/metal.2022.4438","ieee":"M. CIESLAR et al., “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4438.","chicago":"CIESLAR, Miroslav, Barbora KŘIVSKÁ, Rostislav KRÁLÍK, Lucia BAJTOŠOVÁ, Olexandr Grydin, Mykhailo STOLBCHENKO, and Mirko Schaper. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.” In METAL 2022 Conference Proeedings. TANGER Ltd., 2022. https://doi.org/10.37904/metal.2022.4438.","ama":"CIESLAR M, KŘIVSKÁ B, KRÁLÍK R, et al. HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY. In: METAL 2022 Conference Proeedings. TANGER Ltd.; 2022. doi:10.37904/metal.2022.4438"},"publication_identifier":{"issn":["2694-9296"]},"publication_status":"published"}]