[{"publication_status":"published","date_updated":"2025-06-06T08:06:32Z","title":"Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks","status":"public","year":"2021","publication_identifier":{"issn":["0921-5093"]},"author":[{"full_name":"Camberg, Alan Adam","last_name":"Camberg","first_name":"Alan Adam","id":"60544"},{"id":"50215","first_name":"Anatolii","last_name":"Andreiev","full_name":"Andreiev, Anatolii"},{"full_name":"Pramanik, Sudipta","last_name":"Pramanik","first_name":"Sudipta"},{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"user_id":"15952","doi":"10.1016/j.msea.2021.142312","article_number":"142312","_id":"27700","publisher":"Elsevier","language":[{"iso":"eng"}],"quality_controlled":"1","publication":"Materials Science and Engineering: A","citation":{"ieee":"A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.","apa":"Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., & Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A, Article 142312. https://doi.org/10.1016/j.msea.2021.142312","short":"A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A (2021).","chicago":"Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.142312.","mla":"Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.","bibtex":"@article{Camberg_Andreiev_Pramanik_Hoyer_Tröster_Schaper_2021, title={Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks}, DOI={10.1016/j.msea.2021.142312}, number={142312}, journal={Materials Science and Engineering: A}, publisher={Elsevier}, author={Camberg, Alan Adam and Andreiev, Anatolii and Pramanik, Sudipta and Hoyer, Kay-Peter and Tröster, Thomas and Schaper, Mirko}, year={2021} }","ama":"Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.142312"},"type":"journal_article","department":[{"_id":"9"},{"_id":"158"},{"_id":"149"},{"_id":"321"}],"date_created":"2021-11-22T12:05:46Z"},{"doi":"10.1007/978-3-662-62833-1_3","user_id":"15952","language":[{"iso":"eng"}],"_id":"29086","date_updated":"2025-06-06T08:09:10Z","publication_status":"published","year":"2021","title":"Hybridprofile für Trag- und Crashstrukturen","status":"public","publication_identifier":{"isbn":["9783662628324","9783662628331"]},"author":[{"last_name":"Drossel","first_name":"Welf-G","full_name":"Drossel, Welf-G"},{"id":"7850","full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias"},{"full_name":"Böhme, Marcus","last_name":"Böhme","first_name":"Marcus"},{"first_name":"Christian","last_name":"Dammann","full_name":"Dammann, Christian"},{"first_name":"Axel","last_name":"Dittes","full_name":"Dittes, Axel"},{"full_name":"Gießmann, Mina","first_name":"Mina","last_name":"Gießmann"},{"full_name":"Hühne, Christian","first_name":"Christian","last_name":"Hühne"},{"first_name":"Jörn","last_name":"Ihlemann","full_name":"Ihlemann, Jörn"},{"full_name":"Kießling, Robert","first_name":"Robert","last_name":"Kießling"},{"full_name":"Lampke, Thomas","last_name":"Lampke","first_name":"Thomas"},{"id":"49691","first_name":"Peter","last_name":"Lenz","full_name":"Lenz, Peter"},{"first_name":"Rolf","last_name":"Mahnken","full_name":"Mahnken, Rolf","id":"335"},{"last_name":"Meschut","first_name":"Gerson","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056"},{"first_name":"Roland","last_name":"Müller","full_name":"Müller, Roland"},{"full_name":"Nier, Matthias","last_name":"Nier","first_name":"Matthias"},{"full_name":"Prussak, Robert","last_name":"Prussak","first_name":"Robert"},{"first_name":"Matthias","last_name":"Riemer","full_name":"Riemer, Matthias"},{"last_name":"Sander","first_name":"Sascha","full_name":"Sander, Sascha","id":"23175"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"},{"last_name":"Scharf","first_name":"Ingolf","full_name":"Scharf, Ingolf"},{"first_name":"Mario","last_name":"Scholze","full_name":"Scholze, Mario"},{"full_name":"Schwöbel, Stephan-Daniel","first_name":"Stephan-Daniel","last_name":"Schwöbel"},{"last_name":"Sharafiev","first_name":"Semen","full_name":"Sharafiev, Semen"},{"first_name":"Michael","last_name":"Sinapius","full_name":"Sinapius, Michael"},{"first_name":"Daniel","last_name":"Stefaniak","full_name":"Stefaniak, Daniel"},{"full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas","id":"553"},{"full_name":"Wagner, Martin F. -X.","last_name":"Wagner","first_name":"Martin F. -X."},{"full_name":"Wang, Zheng","last_name":"Wang","first_name":"Zheng"},{"full_name":"Zinn, Carolin","first_name":"Carolin","last_name":"Zinn"}],"type":"book_chapter","department":[{"_id":"9"},{"_id":"154"},{"_id":"321"},{"_id":"149"}],"place":"Berlin, Heidelberg","date_created":"2021-12-22T12:29:50Z","quality_controlled":"1","publication":"Intrinsische Hybridverbunde für Leichtbautragstrukturen","citation":{"ama":"Drossel W-G, Bobbert M, Böhme M, et al. Hybridprofile für Trag- und Crashstrukturen. In: Intrinsische Hybridverbunde Für Leichtbautragstrukturen. ; 2021. doi:10.1007/978-3-662-62833-1_3","bibtex":"@inbook{Drossel_Bobbert_Böhme_Dammann_Dittes_Gießmann_Hühne_Ihlemann_Kießling_Lampke_et al._2021, place={Berlin, Heidelberg}, title={Hybridprofile für Trag- und Crashstrukturen}, DOI={10.1007/978-3-662-62833-1_3}, booktitle={Intrinsische Hybridverbunde für Leichtbautragstrukturen}, author={Drossel, Welf-G and Bobbert, Mathias and Böhme, Marcus and Dammann, Christian and Dittes, Axel and Gießmann, Mina and Hühne, Christian and Ihlemann, Jörn and Kießling, Robert and Lampke, Thomas and et al.}, year={2021} }","mla":"Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.","chicago":"Drossel, Welf-G, Mathias Bobbert, Marcus Böhme, Christian Dammann, Axel Dittes, Mina Gießmann, Christian Hühne, et al. “Hybridprofile Für Trag- Und Crashstrukturen.” In Intrinsische Hybridverbunde Für Leichtbautragstrukturen. Berlin, Heidelberg, 2021. https://doi.org/10.1007/978-3-662-62833-1_3.","short":"W.-G. Drossel, M. Bobbert, M. Böhme, C. Dammann, A. Dittes, M. Gießmann, C. Hühne, J. Ihlemann, R. Kießling, T. Lampke, P. Lenz, R. Mahnken, G. Meschut, R. Müller, M. Nier, R. Prussak, M. Riemer, S. Sander, M. Schaper, I. Scharf, M. Scholze, S.-D. Schwöbel, S. Sharafiev, M. Sinapius, D. Stefaniak, T. Tröster, M.F.-X. Wagner, Z. Wang, C. Zinn, in: Intrinsische Hybridverbunde Für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.","apa":"Drossel, W.-G., Bobbert, M., Böhme, M., Dammann, C., Dittes, A., Gießmann, M., Hühne, C., Ihlemann, J., Kießling, R., Lampke, T., Lenz, P., Mahnken, R., Meschut, G., Müller, R., Nier, M., Prussak, R., Riemer, M., Sander, S., Schaper, M., … Zinn, C. (2021). Hybridprofile für Trag- und Crashstrukturen. In Intrinsische Hybridverbunde für Leichtbautragstrukturen. https://doi.org/10.1007/978-3-662-62833-1_3","ieee":"W.-G. Drossel et al., “Hybridprofile für Trag- und Crashstrukturen,” in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Berlin, Heidelberg, 2021."}},{"publication":"Journal of Materials Processing Technology","citation":{"mla":"Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183.","bibtex":"@article{Andreiev_Hoyer_Dula_Hengsbach_Haase_Gierse_Zimmer_Tröster_Schaper_2021, title={Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section}, DOI={10.1016/j.jmatprotec.2021.117183}, number={117183}, journal={Journal of Materials Processing Technology}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach, Florian and Haase, Michael and Gierse, Jan and Zimmer, Detmar and Tröster, Thomas and Schaper, Mirko}, year={2021} }","ama":"Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology. Published online 2021. doi:10.1016/j.jmatprotec.2021.117183","ieee":"A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,” Journal of Materials Processing Technology, Art. no. 117183, 2021, doi: 10.1016/j.jmatprotec.2021.117183.","apa":"Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Haase, M., Gierse, J., Zimmer, D., Tröster, T., & Schaper, M. (2021). Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology, Article 117183. https://doi.org/10.1016/j.jmatprotec.2021.117183","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117183.","short":"A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, M. Haase, J. Gierse, D. Zimmer, T. Tröster, M. Schaper, Journal of Materials Processing Technology (2021)."},"quality_controlled":"1","date_created":"2021-09-08T07:29:43Z","type":"journal_article","department":[{"_id":"158"},{"_id":"149"},{"_id":"146"},{"_id":"321"},{"_id":"9"}],"status":"public","title":"Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section","year":"2021","author":[{"full_name":"Andreiev, Anatolii","last_name":"Andreiev","first_name":"Anatolii","id":"50215"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"first_name":"Dimitri","last_name":"Dula","full_name":"Dula, Dimitri"},{"id":"14073","first_name":"Florian","last_name":"Hengsbach","full_name":"Hengsbach, Florian"},{"full_name":"Haase, Michael","first_name":"Michael","last_name":"Haase","id":"35970"},{"full_name":"Gierse, Jan","last_name":"Gierse","first_name":"Jan","id":"28610"},{"last_name":"Zimmer","first_name":"Detmar","full_name":"Zimmer, Detmar","id":"604"},{"id":"553","full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster"},{"last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720"}],"publication_identifier":{"issn":["0924-0136"]},"date_updated":"2025-06-06T08:10:24Z","publication_status":"published","article_number":"117183","_id":"23898","language":[{"iso":"eng"}],"doi":"10.1016/j.jmatprotec.2021.117183","user_id":"15952"},{"publication":"Proc. 20th Conference of Czech and Slovak Physicists","citation":{"ieee":"B. Krivská et al., “Interdiffusion in aluminum-steel clad strip,” in Proc. 20th Conference of Czech and Slovak Physicists, Prague, 2020, pp. 153–154.","apa":"Krivská, B., Šlapáková, M., Kihoulou, M., Králík, R., Bajtošová, L., Cieslar, M., Grydin, O., Stolbchenko, M., & Schaper, M. (2020). Interdiffusion in aluminum-steel clad strip. Proc. 20th Conference of Czech and Slovak Physicists, 153–154.","chicago":"Krivská, Barbora, Michaela Šlapáková, Martin Kihoulou, Rostislav Králík, Lucia Bajtošová, Miroslav Cieslar, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “Interdiffusion in Aluminum-Steel Clad Strip.” In Proc. 20th Conference of Czech and Slovak Physicists, 153–54, 2020.","short":"B. Krivská, M. Šlapáková, M. Kihoulou, R. Králík, L. Bajtošová, M. Cieslar, O. Grydin, M. Stolbchenko, M. Schaper, in: Proc. 20th Conference of Czech and Slovak Physicists, 2020, pp. 153–154.","mla":"Krivská, Barbora, et al. “Interdiffusion in Aluminum-Steel Clad Strip.” Proc. 20th Conference of Czech and Slovak Physicists, 2020, pp. 153–54.","bibtex":"@inproceedings{Krivská_Šlapáková_Kihoulou_Králík_Bajtošová_Cieslar_Grydin_Stolbchenko_Schaper_2020, title={Interdiffusion in aluminum-steel clad strip}, booktitle={Proc. 20th Conference of Czech and Slovak Physicists}, author={Krivská, Barbora and Šlapáková, Michaela and Kihoulou, Martin and Králík, Rostislav and Bajtošová, Lucia and Cieslar, Miroslav and Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}, year={2020}, pages={153–154} }","ama":"Krivská B, Šlapáková M, Kihoulou M, et al. Interdiffusion in aluminum-steel clad strip. In: Proc. 20th Conference of Czech and Slovak Physicists. ; 2020:153-154."},"type":"conference","department":[{"_id":"158"}],"date_created":"2021-09-16T16:16:14Z","publication_status":"published","date_updated":"2022-01-06T06:56:27Z","status":"public","title":"Interdiffusion in aluminum-steel clad strip","year":"2020","author":[{"full_name":"Krivská, Barbora","first_name":"Barbora","last_name":"Krivská"},{"last_name":"Šlapáková","first_name":"Michaela","full_name":"Šlapáková, Michaela"},{"full_name":"Kihoulou, Martin","first_name":"Martin","last_name":"Kihoulou"},{"first_name":"Rostislav","last_name":"Králík","full_name":"Králík, Rostislav"},{"last_name":"Bajtošová","first_name":"Lucia","full_name":"Bajtošová, Lucia"},{"last_name":"Cieslar","first_name":"Miroslav","full_name":"Cieslar, Miroslav"},{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"},{"full_name":"Stolbchenko, Mykhailo","last_name":"Stolbchenko","first_name":"Mykhailo"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"conference":{"end_date":"2020-09-10","location":"Prague","name":"20th Conference of Czech and Slovak Physicists","start_date":"2020-09-07"},"user_id":"43822","page":"153-154","_id":"24567","language":[{"iso":"eng"}]},{"type":"book_chapter","department":[{"_id":"158"},{"_id":"321"}],"date_created":"2021-09-06T13:24:55Z","place":"Cham","quality_controlled":"1","publication":"The Minerals, Metals & Materials Series","citation":{"short":"A. Reitz, O. Grydin, M. Schaper, in: The Minerals, Metals & Materials Series, Springer, Cham, 2020.","chicago":"Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” In The Minerals, Metals & Materials Series. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-36628-5_7.","ieee":"A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in The Minerals, Metals & Materials Series, Cham: Springer, 2020.","apa":"Reitz, A., Grydin, O., & Schaper, M. (2020). Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts. In The Minerals, Metals & Materials Series. Springer. https://doi.org/10.1007/978-3-030-36628-5_7","bibtex":"@inbook{Reitz_Grydin_Schaper_2020, place={Cham}, title={Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts}, DOI={10.1007/978-3-030-36628-5_7}, booktitle={The Minerals, Metals & Materials Series}, publisher={Springer}, author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2020} }","ama":"Reitz A, Grydin O, Schaper M. Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts. In: The Minerals, Metals & Materials Series. Springer; 2020. doi:10.1007/978-3-030-36628-5_7","mla":"Reitz, Alexander, et al. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” The Minerals, Metals & Materials Series, Springer, 2020, doi:10.1007/978-3-030-36628-5_7."},"user_id":"24803","doi":"10.1007/978-3-030-36628-5_7","main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-030-36628-5_7"}],"_id":"23801","publisher":"Springer","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2022-01-06T06:56:00Z","title":"Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts","status":"public","year":"2020","publication_identifier":{"issn":["2367-1181","2367-1696"]},"author":[{"full_name":"Reitz, Alexander","first_name":"Alexander","last_name":"Reitz","orcid":"0000-0001-9047-467X","id":"24803"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}]},{"quality_controlled":"1","citation":{"ieee":"W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, vol. 29, no. 6, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.","apa":"Tillmann, W., Hagen, L., Schaak, C., Liß, J., Schaper, M., Hoyer, K.-P., Aydinöz, M. E., & Garthe, K.-U. (2020). Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology, 29(6), 1396–1409. https://doi.org/10.1007/s11666-020-01081-y","chicago":"Tillmann, Wolfgang, Leif Hagen, Christoph Schaak, J. Liß, Mirko Schaper, Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology 29, no. 6 (2020): 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.","short":"W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology 29 (2020) 1396–1409.","mla":"Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, vol. 29, no. 6, Springer Science and Business Media LLC, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.","bibtex":"@article{Tillmann_Hagen_Schaak_Liß_Schaper_Hoyer_Aydinöz_Garthe_2020, title={Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}, volume={29}, DOI={10.1007/s11666-020-01081-y}, number={6}, journal={Journal of Thermal Spray Technology}, publisher={Springer Science and Business Media LLC}, author={Tillmann, Wolfgang and Hagen, Leif and Schaak, Christoph and Liß, J. and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz, Mehmet Esat and Garthe, Kai-Uwe}, year={2020}, pages={1396–1409} }","ama":"Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. 2020;29(6):1396-1409. doi:10.1007/s11666-020-01081-y"},"user_id":"43720","volume":29,"page":"1396-1409","_id":"41519","publisher":"Springer Science and Business Media LLC","status":"public","keyword":["Materials Chemistry","Surfaces","Coatings and Films","Condensed Matter Physics"],"type":"journal_article","department":[{"_id":"9"},{"_id":"158"}],"date_created":"2023-02-02T14:41:03Z","abstract":[{"text":"AbstractDifferent studies have been demonstrated that the surface integrity of substrate bulk materials to be coated has a significant impact on the adhesion of thermally sprayed coatings. It is known that the surface integrity of parts processed by selective laser melting (SLM) differs from those obtained from bulk materials. Although 316L stainless steel is among the most investigated material for SLM, the adhesion of thermally sprayed coatings on 316L stainless steel substrates processed by SLM has not been studied yet. This study aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless steel substrates processed by SLM and their effect on the adhesion of high velocity oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical effects and residual stress-related phenomena, a stress-relief heat treatment of the SLM substrates served as a reference throughout the investigations. The differently pre-treated SLM substrates were investigated with regard to the surface roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers interfacial indentation tests were conducted to assess the resulting coating adhesion. The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit good adhesion to the SLM 316L substrates. However, it was found that the stress state in the SLM 316L substrate surface is more likely to affect the adhesion of the WC-Co coating, while the substrate surface roughness showed a marginal effect.","lang":"eng"}],"issue":"6","publication":"Journal of Thermal Spray Technology","doi":"10.1007/s11666-020-01081-y","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2023-06-01T14:29:14Z","intvolume":" 29","year":"2020","title":"Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM","author":[{"full_name":"Tillmann, Wolfgang","last_name":"Tillmann","first_name":"Wolfgang"},{"first_name":"Leif","last_name":"Hagen","full_name":"Hagen, Leif"},{"last_name":"Schaak","first_name":"Christoph","full_name":"Schaak, Christoph"},{"last_name":"Liß","first_name":"J.","full_name":"Liß, J."},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"id":"48411","last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"},{"full_name":"Aydinöz, Mehmet Esat","first_name":"Mehmet Esat","last_name":"Aydinöz"},{"id":"11199","orcid":"0000-0003-0741-3812","last_name":"Garthe","first_name":"Kai-Uwe","full_name":"Garthe, Kai-Uwe"}],"publication_identifier":{"issn":["1059-9630","1544-1016"]}},{"language":[{"iso":"eng"}],"doi":"10.1002/mawe.202000109","year":"2020","title":"Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates","author":[{"full_name":"Tillmann, Wolfgang","last_name":"Tillmann","first_name":"Wolfgang"},{"full_name":"Hagen, Leif","last_name":"Hagen","first_name":"Leif"},{"id":"11199","first_name":"Kai-Uwe","orcid":"0000-0003-0741-3812","last_name":"Garthe","full_name":"Garthe, Kai-Uwe"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"publication_identifier":{"issn":["0933-5137","1521-4052"]},"date_updated":"2023-06-01T14:29:04Z","publication_status":"published","intvolume":" 51","date_created":"2023-02-02T14:40:14Z","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"department":[{"_id":"9"},{"_id":"158"}],"issue":"11","publication":"Materialwissenschaft und Werkstofftechnik","page":"1452-1464","publisher":"Wiley","_id":"41518","user_id":"43720","volume":51,"status":"public","citation":{"mla":"Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 11, Wiley, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.","ama":"Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. 2020;51(11):1452-1464. doi:10.1002/mawe.202000109","bibtex":"@article{Tillmann_Hagen_Garthe_Hoyer_Schaper_2020, title={Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates}, volume={51}, DOI={10.1002/mawe.202000109}, number={11}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Tillmann, Wolfgang and Hagen, Leif and Garthe, Kai-Uwe and Hoyer, Kay-Peter and Schaper, Mirko}, year={2020}, pages={1452–1464} }","apa":"Tillmann, W., Hagen, L., Garthe, K.-U., Hoyer, K.-P., & Schaper, M. (2020). Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft Und Werkstofftechnik, 51(11), 1452–1464. https://doi.org/10.1002/mawe.202000109","ieee":"W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 11, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.","short":"W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 1452–1464.","chicago":"Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik 51, no. 11 (2020): 1452–64. https://doi.org/10.1002/mawe.202000109."},"quality_controlled":"1"},{"_id":"23797","publisher":"Springer","page":"5628-5638","user_id":"43720","status":"public","oa":"1","citation":{"mla":"Reitz, Alexander, et al. “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” Metallurgical and Materials Transactions A, Springer, 2020, pp. 5628–38, doi:10.1007/s11661-020-05976-x.","bibtex":"@article{Reitz_Grydin_Schaper_2020, title={Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5}, DOI={10.1007/s11661-020-05976-x}, journal={Metallurgical and Materials Transactions A}, publisher={Springer}, author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2020}, pages={5628–5638} }","ama":"Reitz A, Grydin O, Schaper M. Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5. Metallurgical and Materials Transactions A. Published online 2020:5628-5638. doi:10.1007/s11661-020-05976-x","ieee":"A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5,” Metallurgical and Materials Transactions A, pp. 5628–5638, 2020, doi: 10.1007/s11661-020-05976-x.","apa":"Reitz, A., Grydin, O., & Schaper, M. (2020). Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5. Metallurgical and Materials Transactions A, 5628–5638. https://doi.org/10.1007/s11661-020-05976-x","chicago":"Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” Metallurgical and Materials Transactions A, 2020, 5628–38. https://doi.org/10.1007/s11661-020-05976-x.","short":"A. Reitz, O. Grydin, M. Schaper, Metallurgical and Materials Transactions A (2020) 5628–5638."},"quality_controlled":"1","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://doi.org/10.1007/s11661-020-05976-x","open_access":"1"}],"doi":"10.1007/s11661-020-05976-x","publication_identifier":{"issn":["1073-5623","1543-1940"]},"author":[{"id":"24803","orcid":"0000-0001-9047-467X","last_name":"Reitz","first_name":"Alexander","full_name":"Reitz, Alexander"},{"full_name":"Grydin, Olexandr","last_name":"Grydin","first_name":"Olexandr","id":"43822"},{"id":"43720","first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko"}],"year":"2020","title":"Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5","article_type":"original","date_updated":"2023-06-01T14:30:12Z","publication_status":"published","date_created":"2021-09-06T12:55:51Z","department":[{"_id":"158"},{"_id":"321"}],"type":"journal_article","publication":"Metallurgical and Materials Transactions A","abstract":[{"text":"Abstract\r\nSafety-relevant components in automobiles require materials that combine high strength with sufficient residual ductility and high-energy absorption. A graded thermo-mechanical treatment of the press-hardening steel 22MnB5 with graded microstructure can provide a material with such properties. Different austenitization temperatures, cooling and forming conditions within a sheet part lead to the development of microstructures with mixed phase compositions. To determine the resulting phase contents in such graded processed parts, a large number of dilatometric tests are usually required. With a non-contact characterization method, it is possible to detect local phase transformations on an inhomogeneously treated flat steel specimen. For press-hardening steel after heat treatment and thermo-mechanical processing, correlations between austenitization temperature, hot deformation strain, microstructure, and hardness are established.","lang":"eng"}]},{"oa":"1","citation":{"chicago":"Grydin, Olexandr, Mykhailo Stolbchenko, Mirko Schaper, Sára Belejová, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, and Miroslav Cieslar. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals 10, no. 8 (2020). https://doi.org/10.3390/met10080987.","short":"O. Grydin, M. Stolbchenko, M. Schaper, S. Belejová, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, M. Cieslar, Metals 10 (2020).","ieee":"O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987.","apa":"Grydin, O., Stolbchenko, M., Schaper, M., Belejová, S., Králík, R., Bajtošová, L., Křivská, B., Hájek, M., & Cieslar, M. (2020). New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications. Metals, 10(8), Article 987. https://doi.org/10.3390/met10080987","bibtex":"@article{Grydin_Stolbchenko_Schaper_Belejová_Králík_Bajtošová_Křivská_Hájek_Cieslar_2020, title={New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications}, volume={10}, DOI={10.3390/met10080987}, number={8987}, journal={Metals}, author={Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko and Belejová, Sára and Králík, Rostislav and Bajtošová, Lucia and Křivská, Barbora and Hájek, Michal and Cieslar, Miroslav}, year={2020} }","ama":"Grydin O, Stolbchenko M, Schaper M, et al. New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications. Metals. 2020;10(8). doi:10.3390/met10080987","mla":"Grydin, Olexandr, et al. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals, vol. 10, no. 8, 987, 2020, doi:10.3390/met10080987."},"quality_controlled":"1","_id":"24573","user_id":"43720","volume":10,"status":"public","date_created":"2021-09-16T16:24:50Z","type":"journal_article","department":[{"_id":"158"}],"publication":"Metals","issue":"8","abstract":[{"lang":"eng","text":"Al-Li based alloys are attractive materials for the aerospace industry. The twin-roll casting of such materials could provide properties not achievable by conventional direct-chill casting and downstream processing methods due to significantly higher solidification rates. An Al-Li-Cu-Mg-Zr alloy was twin-roll cast with the same alloy containing a small addition of Sc. The microstructure of as-cast materials and the influence of Sc on the behavior of the alloy at elevated temperatures were studied by means of light and electron microscopy and by resistivity measurements. A fine-grained structure was formed during twin-roll casting, but several surface and internal defects were found on the strips, which should be suppressed by a further adjustment of the casting conditions. The addition of Sc had a positive effect on grain size uniformity and microstructure stabilization at elevated temperatures, as shown by the precipitation of a fine dispersion of coherent Sc- and Zr-containing precipitates."}],"article_number":"987","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2075-4701/10/8/987/htm"}],"language":[{"iso":"eng"}],"doi":"10.3390/met10080987","title":"New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications","year":"2020","publication_identifier":{"issn":["2075-4701"]},"author":[{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"},{"full_name":"Stolbchenko, Mykhailo","first_name":"Mykhailo","last_name":"Stolbchenko"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"last_name":"Belejová","first_name":"Sára","full_name":"Belejová, Sára"},{"last_name":"Králík","first_name":"Rostislav","full_name":"Králík, Rostislav"},{"full_name":"Bajtošová, Lucia","first_name":"Lucia","last_name":"Bajtošová"},{"first_name":"Barbora","last_name":"Křivská","full_name":"Křivská, Barbora"},{"last_name":"Hájek","first_name":"Michal","full_name":"Hájek, Michal"},{"full_name":"Cieslar, Miroslav","last_name":"Cieslar","first_name":"Miroslav"}],"publication_status":"published","date_updated":"2023-06-01T14:30:52Z","article_type":"original","intvolume":" 10"},{"volume":31,"user_id":"43720","_id":"24100","page":"095701","status":"public","quality_controlled":"1","citation":{"bibtex":"@article{Engelkemeier_Lindner_Bürger_Vaupel_Hartmann_Tiemann_Hoyer_Schaper_2020, title={Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties}, volume={31}, DOI={10.1088/1361-6528/ab55bc}, journal={Nanotechnology}, author={Engelkemeier, Katja and Lindner, Jörg and Bürger, Julius and Vaupel, Kathrin and Hartmann, Marc and Tiemann, Michael and Hoyer, Kay-Peter and Schaper, Mirko}, year={2020}, pages={095701} }","ama":"Engelkemeier K, Lindner J, Bürger J, et al. Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology. 2020;31:095701. doi:10.1088/1361-6528/ab55bc","mla":"Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, 2020, p. 095701, doi:10.1088/1361-6528/ab55bc.","short":"K. Engelkemeier, J. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2020) 095701.","chicago":"Engelkemeier, Katja, Jörg Lindner, Julius Bürger, Kathrin Vaupel, Marc Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology 31 (2020): 095701. https://doi.org/10.1088/1361-6528/ab55bc.","ieee":"K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, p. 095701, 2020, doi: 10.1088/1361-6528/ab55bc.","apa":"Engelkemeier, K., Lindner, J., Bürger, J., Vaupel, K., Hartmann, M., Tiemann, M., Hoyer, K.-P., & Schaper, M. (2020). Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology, 31, 095701. https://doi.org/10.1088/1361-6528/ab55bc"},"doi":"10.1088/1361-6528/ab55bc","language":[{"iso":"eng"}],"intvolume":" 31","article_type":"original","date_updated":"2023-06-01T14:29:58Z","publication_status":"published","publication_identifier":{"issn":["0957-4484","1361-6528"]},"author":[{"first_name":"Katja","last_name":"Engelkemeier","full_name":"Engelkemeier, Katja","id":"21743"},{"id":"20797","last_name":"Lindner","first_name":"Jörg","full_name":"Lindner, Jörg"},{"last_name":"Bürger","first_name":"Julius","full_name":"Bürger, Julius","id":"46952"},{"first_name":"Kathrin","last_name":"Vaupel","full_name":"Vaupel, Kathrin"},{"full_name":"Hartmann, Marc","last_name":"Hartmann","first_name":"Marc"},{"id":"23547","full_name":"Tiemann, Michael","last_name":"Tiemann","orcid":"0000-0003-1711-2722","first_name":"Michael"},{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"year":"2020","title":"Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties","department":[{"_id":"9"},{"_id":"158"},{"_id":"301"},{"_id":"286"},{"_id":"35"},{"_id":"307"},{"_id":"2"}],"type":"journal_article","date_created":"2021-09-10T06:49:55Z","abstract":[{"lang":"eng","text":"Zinc oxide (ZnO) hollow spheres with defined morphology and micro-/nanostructure are prepared by a hydrothermal synthesis approach. The materials possess fine-leaved structures at their particle surface (nanowall hollow micro spheres). Morphology control is achieved by citric acid used as an additive in variable relative quantities during the synthesis. The structure formation is studied by various time-dependent ex situ methods, such as scanning electron microscopy, x-ray diffraction, and Raman spectroscopy. The fine-leaved surface structure is characterized by high-resolution transmission electron microscopy techniques (HRTEM, STEM), using a high-angle annular dark field detector, as well as by differential phase contrast analysis. In-depth structural characterization of the nanowalls by drop-by-drop ex situ FE-SEM analysis provides insight into possible structure formation mechanisms. Further investigation addresses the thermal stability of the particle morphology and the enhancement of the surface-to-volume ratio by heat treatment (examined by N2 physisorption)."}],"publication":"Nanotechnology"},{"citation":{"chicago":"Stolbchenko, Mykhailo, Hanna Makeieva, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials 22, no. 6 (2020): 2009–29. https://doi.org/10.1177/1099636218792539.","short":"M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, M. Schaper, Journal of Sandwich Structures & Materials 22 (2020) 2009–2029.","ieee":"M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi: 10.1177/1099636218792539.","apa":"Stolbchenko, M., Makeieva, H., Grydin, O., Frolov, Y., & Schaper, M. (2020). Strain parameters at hot rolling of aluminum strips reinforced with steel netting. Journal of Sandwich Structures & Materials, 22(6), 2009–2029. https://doi.org/10.1177/1099636218792539","bibtex":"@article{Stolbchenko_Makeieva_Grydin_Frolov_Schaper_2020, title={Strain parameters at hot rolling of aluminum strips reinforced with steel netting}, volume={22}, DOI={10.1177/1099636218792539}, number={6}, journal={Journal of Sandwich Structures & Materials}, author={Stolbchenko, Mykhailo and Makeieva, Hanna and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2020}, pages={2009–2029} }","ama":"Stolbchenko M, Makeieva H, Grydin O, Frolov Y, Schaper M. Strain parameters at hot rolling of aluminum strips reinforced with steel netting. Journal of Sandwich Structures & Materials. 2020;22(6):2009-2029. doi:10.1177/1099636218792539","mla":"Stolbchenko, Mykhailo, et al. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials, vol. 22, no. 6, 2020, pp. 2009–29, doi:10.1177/1099636218792539."},"quality_controlled":"1","page":"2009-2029","_id":"24572","user_id":"43720","volume":22,"status":"public","date_created":"2021-09-16T16:23:44Z","type":"journal_article","department":[{"_id":"158"}],"publication":"Journal of Sandwich Structures & Materials","issue":"6","abstract":[{"lang":"eng","text":" This experiment studied the strain parameters of rolling an aluminum matrix when wire netting is inserted between aluminum layers. During the experiment, two types of stainless steel fabric netting oriented parallel and diagonal to the rolling axis were placed between two aluminum strips and rolled. Multiple rolling processes were performed in which the temperature and pressure on the material were varied to produce bonding of matrix layers. During the study, the following main investigations were made: strain on areas of longitudinal and transverse cross sections of the composite was measured; stretching and ovalization of net wiring and changes in the net cell angles were determined; mechanical properties of composites along the rolling direction were tested. The main contradiction resulting from this experiment was as follows: the contact pressure required for the bonding of aluminum layers produces extreme tensile strain on the inserted net wires, reducing the mechanical properties of the reinforcing net and thus reducing properties of the entire composite. Optimal results in the longitudinal tension tests were achieved by using strips with diagonally oriented net-reinforcement. "}],"language":[{"iso":"eng"}],"doi":"10.1177/1099636218792539","title":"Strain parameters at hot rolling of aluminum strips reinforced with steel netting","year":"2020","publication_identifier":{"issn":["1099-6362","1530-7972"]},"author":[{"last_name":"Stolbchenko","first_name":"Mykhailo","full_name":"Stolbchenko, Mykhailo"},{"full_name":"Makeieva, Hanna","first_name":"Hanna","last_name":"Makeieva"},{"id":"43822","first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr"},{"first_name":"Yaroslav","last_name":"Frolov","full_name":"Frolov, Yaroslav"},{"id":"43720","first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko"}],"date_updated":"2023-06-01T14:30:38Z","publication_status":"published","intvolume":" 22"},{"publication":"Materials Science and Engineering: A","date_created":"2023-02-02T14:42:11Z","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"type":"journal_article","department":[{"_id":"9"},{"_id":"158"}],"year":"2020","title":"Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations","publication_identifier":{"issn":["0921-5093"]},"author":[{"full_name":"Wu, Haoran","last_name":"Wu","first_name":"Haoran"},{"full_name":"Bill, T.","first_name":"T.","last_name":"Bill"},{"last_name":"Teng","first_name":"Z.J.","full_name":"Teng, Z.J."},{"full_name":"Pramanik, Sudipta","last_name":"Pramanik","first_name":"Sudipta"},{"id":"48411","last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"},{"last_name":"Starke","first_name":"Peter","full_name":"Starke, Peter"}],"publication_status":"published","date_updated":"2023-06-01T14:29:23Z","intvolume":" 794","article_number":"139597","language":[{"iso":"eng"}],"doi":"10.1016/j.msea.2020.139597","citation":{"bibtex":"@article{Wu_Bill_Teng_Pramanik_Hoyer_Schaper_Starke_2020, title={Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations}, volume={794}, DOI={10.1016/j.msea.2020.139597}, number={139597}, journal={Materials Science and Engineering: A}, publisher={Elsevier BV}, author={Wu, Haoran and Bill, T. and Teng, Z.J. and Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko and Starke, Peter}, year={2020} }","ama":"Wu H, Bill T, Teng ZJ, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. 2020;794. doi:10.1016/j.msea.2020.139597","mla":"Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.","short":"H. Wu, T. Bill, Z.J. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A 794 (2020).","chicago":"Wu, Haoran, T. Bill, Z.J. Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A 794 (2020). https://doi.org/10.1016/j.msea.2020.139597.","ieee":"H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, vol. 794, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.","apa":"Wu, H., Bill, T., Teng, Z. J., Pramanik, S., Hoyer, K.-P., Schaper, M., & Starke, P. (2020). Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A, 794, Article 139597. https://doi.org/10.1016/j.msea.2020.139597"},"quality_controlled":"1","status":"public","_id":"41520","publisher":"Elsevier BV","user_id":"43720","volume":794},{"volume":394,"user_id":"43720","publisher":"Elsevier BV","_id":"41521","status":"public","quality_controlled":"1","citation":{"mla":"Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, vol. 394, 125748, Elsevier BV, 2020, doi:10.1016/j.surfcoat.2020.125748.","ama":"Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. 2020;394. doi:10.1016/j.surfcoat.2020.125748","bibtex":"@article{Tillmann_Lopes Dias_Stangier_Hagen_Schaper_Hengsbach_Hoyer_2020, title={Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting}, volume={394}, DOI={10.1016/j.surfcoat.2020.125748}, number={125748}, journal={Surface and Coatings Technology}, publisher={Elsevier BV}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Stangier, Dominic and Hagen, Leif and Schaper, Mirko and Hengsbach, Florian and Hoyer, Kay-Peter}, year={2020} }","apa":"Tillmann, W., Lopes Dias, N. F., Stangier, D., Hagen, L., Schaper, M., Hengsbach, F., & Hoyer, K.-P. (2020). Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology, 394, Article 125748. https://doi.org/10.1016/j.surfcoat.2020.125748","ieee":"W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, vol. 394, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.","chicago":"Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology 394 (2020). https://doi.org/10.1016/j.surfcoat.2020.125748.","short":"W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology 394 (2020)."},"doi":"10.1016/j.surfcoat.2020.125748","language":[{"iso":"eng"}],"article_number":"125748","intvolume":" 394","publication_status":"published","date_updated":"2023-06-01T14:29:36Z","publication_identifier":{"issn":["0257-8972"]},"author":[{"last_name":"Tillmann","first_name":"Wolfgang","full_name":"Tillmann, Wolfgang"},{"full_name":"Lopes Dias, Nelson Filipe","first_name":"Nelson Filipe","last_name":"Lopes Dias"},{"first_name":"Dominic","last_name":"Stangier","full_name":"Stangier, Dominic"},{"full_name":"Hagen, Leif","last_name":"Hagen","first_name":"Leif"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"full_name":"Hengsbach, Florian","last_name":"Hengsbach","first_name":"Florian"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"}],"title":"Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting","year":"2020","department":[{"_id":"9"},{"_id":"158"}],"keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Condensed Matter Physics","General Chemistry"],"type":"journal_article","date_created":"2023-02-02T14:43:02Z","publication":"Surface and Coatings Technology"},{"language":[{"iso":"eng"}],"doi":"10.1002/mawe.201900191","publication_identifier":{"issn":["0933-5137","1521-4052"]},"author":[{"id":"50215","full_name":"Andreiev, Anatolii","first_name":"Anatolii","last_name":"Andreiev"},{"full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter","id":"48411"},{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"},{"last_name":"Frolov","first_name":"Yaroslav","full_name":"Frolov, Yaroslav"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"year":"2020","title":"Degradable silver‐based alloys","intvolume":" 51","date_updated":"2023-06-01T14:29:46Z","publication_status":"published","date_created":"2023-02-02T14:43:22Z","department":[{"_id":"9"},{"_id":"158"}],"keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"type":"journal_article","issue":"4","publication":"Materialwissenschaft und Werkstofftechnik","publisher":"Wiley","_id":"41522","page":"517-530","volume":51,"user_id":"43720","status":"public","citation":{"ieee":"A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 4, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.","apa":"Andreiev, A., Hoyer, K.-P., Grydin, O., Frolov, Y., & Schaper, M. (2020). Degradable silver‐based alloys. Materialwissenschaft Und Werkstofftechnik, 51(4), 517–530. https://doi.org/10.1002/mawe.201900191","short":"A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 517–530.","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik 51, no. 4 (2020): 517–30. https://doi.org/10.1002/mawe.201900191.","mla":"Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:10.1002/mawe.201900191.","bibtex":"@article{Andreiev_Hoyer_Grydin_Frolov_Schaper_2020, title={Degradable silver‐based alloys}, volume={51}, DOI={10.1002/mawe.201900191}, number={4}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2020}, pages={517–530} }","ama":"Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. Materialwissenschaft und Werkstofftechnik. 2020;51(4):517-530. doi:10.1002/mawe.201900191"},"quality_controlled":"1"},{"quality_controlled":"1","citation":{"mla":"Stolbchenko, Mykhailo, et al. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, 2020, pp. 1599–608, doi:10.1080/15376494.2018.1520941.","ama":"Stolbchenko M, Frolov Y, Makeieva H, Grydin O, Tershakovec MA, Schaper M. The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. Mechanics of Advanced Materials and Structures. 2020;27(18):1599-1608. doi:10.1080/15376494.2018.1520941","bibtex":"@article{Stolbchenko_Frolov_Makeieva_Grydin_Tershakovec_Schaper_2020, title={The mechanical properties of rolled wire-reinforced aluminum composites at different strain values}, volume={27}, DOI={10.1080/15376494.2018.1520941}, number={18}, journal={Mechanics of Advanced Materials and Structures}, author={Stolbchenko, Mykhailo and Frolov, Yaroslav and Makeieva, Hanna and Grydin, Olexandr and Tershakovec, Michael A. and Schaper, Mirko}, year={2020}, pages={1599–1608} }","apa":"Stolbchenko, M., Frolov, Y., Makeieva, H., Grydin, O., Tershakovec, M. A., & Schaper, M. (2020). The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. Mechanics of Advanced Materials and Structures, 27(18), 1599–1608. https://doi.org/10.1080/15376494.2018.1520941","ieee":"M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, pp. 1599–1608, 2020, doi: 10.1080/15376494.2018.1520941.","chicago":"Stolbchenko, Mykhailo, Yaroslav Frolov, Hanna Makeieva, Olexandr Grydin, Michael A. Tershakovec, and Mirko Schaper. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures 27, no. 18 (2020): 1599–1608. https://doi.org/10.1080/15376494.2018.1520941.","short":"M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M.A. Tershakovec, M. Schaper, Mechanics of Advanced Materials and Structures 27 (2020) 1599–1608."},"status":"public","volume":27,"user_id":"43720","_id":"24571","page":"1599-1608","publication":"Mechanics of Advanced Materials and Structures","issue":"18","department":[{"_id":"158"}],"type":"journal_article","date_created":"2021-09-16T16:22:31Z","intvolume":" 27","publication_status":"published","date_updated":"2023-06-01T14:30:26Z","author":[{"full_name":"Stolbchenko, Mykhailo","first_name":"Mykhailo","last_name":"Stolbchenko"},{"first_name":"Yaroslav","last_name":"Frolov","full_name":"Frolov, Yaroslav"},{"first_name":"Hanna","last_name":"Makeieva","full_name":"Makeieva, Hanna"},{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"},{"first_name":"Michael A.","last_name":"Tershakovec","full_name":"Tershakovec, Michael A."},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"publication_identifier":{"issn":["1537-6494","1537-6532"]},"year":"2020","title":"The mechanical properties of rolled wire-reinforced aluminum composites at different strain values","doi":"10.1080/15376494.2018.1520941","language":[{"iso":"eng"}]},{"quality_controlled":"1","publication":"Materialwissenschaft und Werkstofftechnik","citation":{"short":"W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464.","ama":"Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. Published online 2020:1452-1464. doi:10.1002/mawe.202000109","chicago":"Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, 1452–64. https://doi.org/10.1002/mawe.202000109.","bibtex":"@article{Tillmann_Hagen_Garthe_Hoyer_Schaper_2020, title={Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates}, DOI={10.1002/mawe.202000109}, journal={Materialwissenschaft und Werkstofftechnik}, author={Tillmann, Wolfgang and Hagen, Leif and Garthe, Kai-Uwe and Hoyer, Kay-Peter and Schaper, Mirko}, year={2020}, pages={1452–1464} }","apa":"Tillmann, W., Hagen, L., Garthe, K.-U., Hoyer, K.-P., & Schaper, M. (2020). Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft Und Werkstofftechnik, 1452–1464. https://doi.org/10.1002/mawe.202000109","mla":"Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.","ieee":"W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109."},"type":"journal_article","department":[{"_id":"158"}],"date_created":"2021-09-13T09:14:34Z","date_updated":"2023-06-01T14:31:06Z","publication_status":"published","status":"public","title":"Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates","year":"2020","author":[{"first_name":"Wolfgang","last_name":"Tillmann","full_name":"Tillmann, Wolfgang"},{"full_name":"Hagen, Leif","last_name":"Hagen","first_name":"Leif"},{"orcid":"0000-0003-0741-3812","first_name":"Kai-Uwe","last_name":"Garthe","full_name":"Garthe, Kai-Uwe","id":"11199"},{"full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter","id":"48411"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"publication_identifier":{"issn":["0933-5137","1521-4052"]},"doi":"10.1002/mawe.202000109","user_id":"43720","page":"1452-1464","language":[{"iso":"eng"}],"_id":"24254"},{"department":[{"_id":"158"}],"type":"journal_article","date_created":"2021-09-09T15:52:15Z","abstract":[{"lang":"eng","text":"AbstractDifferent studies have been demonstrated that the surface integrity of substrate bulk materials to be coated has a significant impact on the adhesion of thermally sprayed coatings. It is known that the surface integrity of parts processed by selective laser melting (SLM) differs from those obtained from bulk materials. Although 316L stainless steel is among the most investigated material for SLM, the adhesion of thermally sprayed coatings on 316L stainless steel substrates processed by SLM has not been studied yet. This study aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless steel substrates processed by SLM and their effect on the adhesion of high velocity oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical effects and residual stress-related phenomena, a stress-relief heat treatment of the SLM substrates served as a reference throughout the investigations. The differently pre-treated SLM substrates were investigated with regard to the surface roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers interfacial indentation tests were conducted to assess the resulting coating adhesion. The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit good adhesion to the SLM 316L substrates. However, it was found that the stress state in the SLM 316L substrate surface is more likely to affect the adhesion of the WC-Co coating, while the substrate surface roughness showed a marginal effect."}],"quality_controlled":"1","citation":{"short":"W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409.","chicago":"Tillmann, Wolfgang, Leif Hagen, Christopher Schaak, Jan Liß, Mirko Schaper, Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.","apa":"Tillmann, W., Hagen, L., Schaak, C., Liß, J., Schaper, M., Hoyer, K.-P., Aydinöz, M. E., & Garthe, K.-U. (2020). Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y","ieee":"W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.","ama":"Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y","bibtex":"@article{Tillmann_Hagen_Schaak_Liß_Schaper_Hoyer_Aydinöz_Garthe_2020, title={Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}, DOI={10.1007/s11666-020-01081-y}, journal={Journal of Thermal Spray Technology}, author={Tillmann, Wolfgang and Hagen, Leif and Schaak, Christopher and Liß, Jan and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz, Mehmet Esat and Garthe, Kai-Uwe}, year={2020}, pages={1396–1409} }","mla":"Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y."},"publication":"Journal of Thermal Spray Technology","user_id":"43720","doi":"10.1007/s11666-020-01081-y","_id":"24092","language":[{"iso":"eng"}],"page":"1396-1409","publication_status":"published","date_updated":"2023-06-01T14:31:48Z","publication_identifier":{"issn":["1059-9630","1544-1016"]},"author":[{"last_name":"Tillmann","first_name":"Wolfgang","full_name":"Tillmann, Wolfgang"},{"full_name":"Hagen, Leif","first_name":"Leif","last_name":"Hagen"},{"full_name":"Schaak, Christopher","first_name":"Christopher","last_name":"Schaak"},{"last_name":"Liß","first_name":"Jan","full_name":"Liß, Jan"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko","id":"43720"},{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"last_name":"Aydinöz","first_name":"Mehmet Esat","full_name":"Aydinöz, Mehmet Esat"},{"id":"11199","last_name":"Garthe","first_name":"Kai-Uwe","orcid":"0000-0003-0741-3812","full_name":"Garthe, Kai-Uwe"}],"year":"2020","status":"public","title":"Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM"},{"_id":"24255","language":[{"iso":"eng"}],"page":"1396-1409","user_id":"43720","doi":"10.1007/s11666-020-01081-y","publication_identifier":{"issn":["1059-9630","1544-1016"]},"author":[{"full_name":"Tillmann, W.","last_name":"Tillmann","first_name":"W."},{"first_name":"L.","last_name":"Hagen","full_name":"Hagen, L."},{"full_name":"Schaak, C.","first_name":"C.","last_name":"Schaak"},{"full_name":"Liß, J.","last_name":"Liß","first_name":"J."},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"},{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"first_name":"M. E.","last_name":"Aydinöz","full_name":"Aydinöz, M. E."},{"id":"11199","full_name":"Garthe, Kai-Uwe","first_name":"Kai-Uwe","last_name":"Garthe","orcid":"0000-0003-0741-3812"}],"title":"Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM","year":"2020","status":"public","publication_status":"published","date_updated":"2023-06-01T14:31:19Z","date_created":"2021-09-13T09:15:27Z","department":[{"_id":"158"}],"type":"journal_article","citation":{"ieee":"W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.","apa":"Tillmann, W., Hagen, L., Schaak, C., Liß, J., Schaper, M., Hoyer, K.-P., Aydinöz, M. E., & Garthe, K.-U. (2020). Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y","short":"W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409.","chicago":"Tillmann, W., L. Hagen, C. Schaak, J. Liß, Mirko Schaper, Kay-Peter Hoyer, M. E. Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.","mla":"Tillmann, W., et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.","bibtex":"@article{Tillmann_Hagen_Schaak_Liß_Schaper_Hoyer_Aydinöz_Garthe_2020, title={Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}, DOI={10.1007/s11666-020-01081-y}, journal={Journal of Thermal Spray Technology}, author={Tillmann, W. and Hagen, L. and Schaak, C. and Liß, J. and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz, M. E. and Garthe, Kai-Uwe}, year={2020}, pages={1396–1409} }","ama":"Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y"},"publication":"Journal of Thermal Spray Technology","quality_controlled":"1","abstract":[{"lang":"eng","text":"AbstractDifferent studies have been demonstrated that the surface integrity of substrate bulk materials to be coated has a significant impact on the adhesion of thermally sprayed coatings. It is known that the surface integrity of parts processed by selective laser melting (SLM) differs from those obtained from bulk materials. Although 316L stainless steel is among the most investigated material for SLM, the adhesion of thermally sprayed coatings on 316L stainless steel substrates processed by SLM has not been studied yet. This study aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless steel substrates processed by SLM and their effect on the adhesion of high velocity oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical effects and residual stress-related phenomena, a stress-relief heat treatment of the SLM substrates served as a reference throughout the investigations. The differently pre-treated SLM substrates were investigated with regard to the surface roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers interfacial indentation tests were conducted to assess the resulting coating adhesion. The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit good adhesion to the SLM 316L substrates. However, it was found that the stress state in the SLM 316L substrate surface is more likely to affect the adhesion of the WC-Co coating, while the substrate surface roughness showed a marginal effect."}]},{"type":"journal_article","department":[{"_id":"158"}],"date_created":"2021-09-09T15:54:23Z","quality_controlled":"1","publication":"Materials Science and Engineering: A","citation":{"mla":"Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 139597, 2020, doi:10.1016/j.msea.2020.139597.","ama":"Wu H, Bill T, Teng Z, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. Published online 2020. doi:10.1016/j.msea.2020.139597","bibtex":"@article{Wu_Bill_Teng_Pramanik_Hoyer_Schaper_Starke_2020, title={Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations}, DOI={10.1016/j.msea.2020.139597}, number={139597}, journal={Materials Science and Engineering: A}, author={Wu, Haoran and Bill, Tobias and Teng, Zhenjie and Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko and Starke, Peter}, year={2020} }","apa":"Wu, H., Bill, T., Teng, Z., Pramanik, S., Hoyer, K.-P., Schaper, M., & Starke, P. (2020). Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A, Article 139597. https://doi.org/10.1016/j.msea.2020.139597","ieee":"H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.","chicago":"Wu, Haoran, Tobias Bill, Zhenjie Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 2020. https://doi.org/10.1016/j.msea.2020.139597.","short":"H. Wu, T. Bill, Z. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A (2020)."},"user_id":"43720","doi":"10.1016/j.msea.2020.139597","article_number":"139597","_id":"24093","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2023-06-01T14:32:04Z","status":"public","title":"Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations","year":"2020","author":[{"full_name":"Wu, Haoran","first_name":"Haoran","last_name":"Wu"},{"full_name":"Bill, Tobias","last_name":"Bill","first_name":"Tobias"},{"first_name":"Zhenjie","last_name":"Teng","full_name":"Teng, Zhenjie"},{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411"},{"last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720"},{"full_name":"Starke, Peter","last_name":"Starke","first_name":"Peter"}],"publication_identifier":{"issn":["0921-5093"]}},{"_id":"24094","language":[{"iso":"eng"}],"article_number":"125748","user_id":"43720","doi":"10.1016/j.surfcoat.2020.125748","author":[{"last_name":"Tillmann","first_name":"Wolfgang","full_name":"Tillmann, Wolfgang"},{"full_name":"Lopes Dias, Nelson Filipe","last_name":"Lopes Dias","first_name":"Nelson Filipe"},{"last_name":"Stangier","first_name":"Dominic","full_name":"Stangier, Dominic"},{"first_name":"Leif","last_name":"Hagen","full_name":"Hagen, Leif"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko","id":"43720"},{"full_name":"Hengsbach, Florian","last_name":"Hengsbach","first_name":"Florian"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"}],"publication_identifier":{"issn":["0257-8972"]},"status":"public","year":"2020","title":"Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting","publication_status":"published","date_updated":"2023-06-01T14:32:17Z","date_created":"2021-09-09T15:55:29Z","department":[{"_id":"158"}],"type":"journal_article","citation":{"ieee":"W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.","mla":"Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 125748, 2020, doi:10.1016/j.surfcoat.2020.125748.","apa":"Tillmann, W., Lopes Dias, N. F., Stangier, D., Hagen, L., Schaper, M., Hengsbach, F., & Hoyer, K.-P. (2020). Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology, Article 125748. https://doi.org/10.1016/j.surfcoat.2020.125748","bibtex":"@article{Tillmann_Lopes Dias_Stangier_Hagen_Schaper_Hengsbach_Hoyer_2020, title={Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting}, DOI={10.1016/j.surfcoat.2020.125748}, number={125748}, journal={Surface and Coatings Technology}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Stangier, Dominic and Hagen, Leif and Schaper, Mirko and Hengsbach, Florian and Hoyer, Kay-Peter}, year={2020} }","short":"W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology (2020).","ama":"Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. Published online 2020. doi:10.1016/j.surfcoat.2020.125748","chicago":"Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 2020. https://doi.org/10.1016/j.surfcoat.2020.125748."},"publication":"Surface and Coatings Technology","quality_controlled":"1"}]