[{"citation":{"short":"D. Ahlers, T. Tröster, S. Hermann, P. Koppa, P. Gloetter, M. Schaper, M. Peters, M. Burns, F. Hengsbach, A. Altmann, in: Contributed Papers from MS&#38;T17, 2018.","mla":"Ahlers, Dominik, et al. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” <i>Contributed Papers from MS&#38;T17</i>, 2018, doi:<a href=\"https://doi.org/10.7449/2018mst/2018/mst_2018_117_124\">10.7449/2018mst/2018/mst_2018_117_124</a>.","bibtex":"@inproceedings{Ahlers_Tröster_Hermann_Koppa_Gloetter_Schaper_Peters_Burns_Hengsbach_Altmann_2018, title={Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing}, DOI={<a href=\"https://doi.org/10.7449/2018mst/2018/mst_2018_117_124\">10.7449/2018mst/2018/mst_2018_117_124</a>}, booktitle={Contributed Papers from MS&#38;T17}, author={Ahlers, Dominik and Tröster, Thomas and Hermann, S. and Koppa, P. and Gloetter, P. and Schaper, Mirko and Peters, M. and Burns, M. and Hengsbach, Florian and Altmann, A.}, year={2018} }","chicago":"Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko Schaper, M. Peters, M. Burns, Florian Hengsbach, and A. Altmann. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” In <i>Contributed Papers from MS&#38;T17</i>, 2018. <a href=\"https://doi.org/10.7449/2018mst/2018/mst_2018_117_124\">https://doi.org/10.7449/2018mst/2018/mst_2018_117_124</a>.","ieee":"D. Ahlers <i>et al.</i>, “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing,” 2018, doi: <a href=\"https://doi.org/10.7449/2018mst/2018/mst_2018_117_124\">10.7449/2018mst/2018/mst_2018_117_124</a>.","apa":"Ahlers, D., Tröster, T., Hermann, S., Koppa, P., Gloetter, P., Schaper, M., Peters, M., Burns, M., Hengsbach, F., &#38; Altmann, A. (2018). Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. <i>Contributed Papers from MS&#38;T17</i>. <a href=\"https://doi.org/10.7449/2018mst/2018/mst_2018_117_124\">https://doi.org/10.7449/2018mst/2018/mst_2018_117_124</a>","ama":"Ahlers D, Tröster T, Hermann S, et al. Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. In: <i>Contributed Papers from MS&#38;T17</i>. ; 2018. doi:<a href=\"https://doi.org/10.7449/2018mst/2018/mst_2018_117_124\">10.7449/2018mst/2018/mst_2018_117_124</a>"},"publication_status":"published","user_id":"43720","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"},{"_id":"219"}],"title":"Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing","author":[{"last_name":"Ahlers","id":"11207","full_name":"Ahlers, Dominik","first_name":"Dominik"},{"last_name":"Tröster","id":"553","full_name":"Tröster, Thomas","first_name":"Thomas"},{"first_name":"S.","full_name":"Hermann, S.","last_name":"Hermann"},{"full_name":"Koppa, P.","first_name":"P.","last_name":"Koppa"},{"full_name":"Gloetter, P.","first_name":"P.","last_name":"Gloetter"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"},{"first_name":"M.","full_name":"Peters, M.","last_name":"Peters"},{"last_name":"Burns","first_name":"M.","full_name":"Burns, M."},{"id":"14073","last_name":"Hengsbach","first_name":"Florian","full_name":"Hengsbach, Florian"},{"full_name":"Altmann, A.","first_name":"A.","last_name":"Altmann"}],"doi":"10.7449/2018mst/2018/mst_2018_117_124","_id":"16048","date_updated":"2025-05-20T06:28:38Z","date_created":"2020-02-24T16:11:19Z","quality_controlled":"1","publication":"Contributed Papers from MS&T17","language":[{"iso":"eng"}],"year":"2018","type":"conference","publication_identifier":{"isbn":["9780873397667"]},"status":"public"},{"doi":"10.1007/s40964-018-0044-4","title":"Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers","user_id":"15952","keyword":["Industrial and Manufacturing Engineering"],"type":"journal_article","quality_controlled":"1","publication":"Progress in Additive Manufacturing","issue":"4","page":"221-231","volume":3,"intvolume":"         3","author":[{"first_name":"Florian","full_name":"Hengsbach, Florian","id":"14073","last_name":"Hengsbach"},{"full_name":"Koppa, Peter","first_name":"Peter","last_name":"Koppa"},{"full_name":"Holzweissig, Martin Joachim","first_name":"Martin Joachim","last_name":"Holzweissig"},{"full_name":"Aydinöz, Mehmet Esat","first_name":"Mehmet Esat","last_name":"Aydinöz"},{"last_name":"Taube","full_name":"Taube, Alexander","first_name":"Alexander"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer"},{"last_name":"Starykov","full_name":"Starykov, Oleksiy","first_name":"Oleksiy"},{"last_name":"Tonn","first_name":"Babette","full_name":"Tonn, Babette"},{"last_name":"Niendorf","full_name":"Niendorf, Thomas","first_name":"Thomas"},{"first_name":"Thomas","full_name":"Tröster, Thomas","id":"553","last_name":"Tröster"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"department":[{"_id":"9"},{"_id":"158"},{"_id":"149"},{"_id":"321"}],"citation":{"bibtex":"@article{Hengsbach_Koppa_Holzweissig_Aydinöz_Taube_Hoyer_Starykov_Tonn_Niendorf_Tröster_et al._2018, title={Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers}, volume={3}, DOI={<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>}, number={4}, journal={Progress in Additive Manufacturing}, publisher={Springer Science and Business Media LLC}, author={Hengsbach, Florian and Koppa, Peter and Holzweissig, Martin Joachim and Aydinöz, Mehmet Esat and Taube, Alexander and Hoyer, Kay-Peter and Starykov, Oleksiy and Tonn, Babette and Niendorf, Thomas and Tröster, Thomas and et al.}, year={2018}, pages={221–231} }","mla":"Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” <i>Progress in Additive Manufacturing</i>, vol. 3, no. 4, Springer Science and Business Media LLC, 2018, pp. 221–31, doi:<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>.","short":"F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing 3 (2018) 221–231.","ama":"Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. <i>Progress in Additive Manufacturing</i>. 2018;3(4):221-231. doi:<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>","apa":"Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., &#38; Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. <i>Progress in Additive Manufacturing</i>, <i>3</i>(4), 221–231. <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">https://doi.org/10.1007/s40964-018-0044-4</a>","ieee":"F. Hengsbach <i>et al.</i>, “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” <i>Progress in Additive Manufacturing</i>, vol. 3, no. 4, pp. 221–231, 2018, doi: <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>.","chicago":"Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” <i>Progress in Additive Manufacturing</i> 3, no. 4 (2018): 221–31. <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">https://doi.org/10.1007/s40964-018-0044-4</a>."},"publication_status":"published","year":"2018","publication_identifier":{"issn":["2363-9512","2363-9520"]},"language":[{"iso":"eng"}],"status":"public","date_created":"2023-02-02T14:45:19Z","publisher":"Springer Science and Business Media LLC","date_updated":"2025-06-06T08:28:06Z","_id":"41525"},{"doi":"10.1007/s40964-018-0044-4","title":"Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers","author":[{"full_name":"Hengsbach, Florian","first_name":"Florian","id":"14073","last_name":"Hengsbach"},{"last_name":"Koppa","first_name":"Peter","full_name":"Koppa, Peter"},{"full_name":"Holzweissig, Martin Joachim","first_name":"Martin Joachim","last_name":"Holzweissig"},{"first_name":"Mehmet Esat","full_name":"Aydinöz, Mehmet Esat","last_name":"Aydinöz"},{"first_name":"Alexander","full_name":"Taube, Alexander","last_name":"Taube"},{"id":"48411","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"last_name":"Starykov","full_name":"Starykov, Oleksiy","first_name":"Oleksiy"},{"last_name":"Tonn","full_name":"Tonn, Babette","first_name":"Babette"},{"last_name":"Niendorf","full_name":"Niendorf, Thomas","first_name":"Thomas"},{"id":"553","last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"}],"department":[{"_id":"9"},{"_id":"158"},{"_id":"149"},{"_id":"321"}],"citation":{"ama":"Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. <i>Progress in Additive Manufacturing</i>. Published online 2018:221-231. doi:<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>","apa":"Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., &#38; Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. <i>Progress in Additive Manufacturing</i>, 221–231. <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">https://doi.org/10.1007/s40964-018-0044-4</a>","ieee":"F. Hengsbach <i>et al.</i>, “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” <i>Progress in Additive Manufacturing</i>, pp. 221–231, 2018, doi: <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>.","chicago":"Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” <i>Progress in Additive Manufacturing</i>, 2018, 221–31. <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">https://doi.org/10.1007/s40964-018-0044-4</a>.","bibtex":"@article{Hengsbach_Koppa_Holzweissig_Aydinöz_Taube_Hoyer_Starykov_Tonn_Niendorf_Tröster_et al._2018, title={Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers}, DOI={<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>}, journal={Progress in Additive Manufacturing}, author={Hengsbach, Florian and Koppa, Peter and Holzweissig, Martin Joachim and Aydinöz, Mehmet Esat and Taube, Alexander and Hoyer, Kay-Peter and Starykov, Oleksiy and Tonn, Babette and Niendorf, Thomas and Tröster, Thomas and et al.}, year={2018}, pages={221–231} }","mla":"Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” <i>Progress in Additive Manufacturing</i>, 2018, pp. 221–31, doi:<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>.","short":"F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231."},"user_id":"15952","publication_status":"published","year":"2018","publication_identifier":{"issn":["2363-9512","2363-9520"]},"type":"journal_article","language":[{"iso":"eng"}],"status":"public","publication":"Progress in Additive Manufacturing","quality_controlled":"1","date_created":"2021-09-10T07:13:26Z","date_updated":"2025-06-06T08:28:43Z","_id":"24104","page":"221-231"},{"doi":"10.1007/s40964-018-0044-4","title":"Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers","author":[{"last_name":"Hengsbach","id":"14073","full_name":"Hengsbach, Florian","first_name":"Florian"},{"first_name":"Peter","full_name":"Koppa, Peter","last_name":"Koppa"},{"first_name":"Martin Joachim","full_name":"Holzweissig, Martin Joachim","last_name":"Holzweissig"},{"last_name":"Aydinöz","first_name":"Mehmet Esat","full_name":"Aydinöz, Mehmet Esat"},{"full_name":"Taube, Alexander","first_name":"Alexander","last_name":"Taube"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","id":"48411","last_name":"Hoyer"},{"full_name":"Starykov, Oleksiy","first_name":"Oleksiy","last_name":"Starykov"},{"full_name":"Tonn, Babette","first_name":"Babette","last_name":"Tonn"},{"last_name":"Niendorf","full_name":"Niendorf, Thomas","first_name":"Thomas"},{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster","id":"553"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"}],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"},{"_id":"158"}],"citation":{"ieee":"F. Hengsbach <i>et al.</i>, “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” <i>Progress in Additive Manufacturing</i>, pp. 221–231, 2018, doi: <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>.","chicago":"Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” <i>Progress in Additive Manufacturing</i>, 2018, 221–31. <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">https://doi.org/10.1007/s40964-018-0044-4</a>.","ama":"Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. <i>Progress in Additive Manufacturing</i>. Published online 2018:221-231. doi:<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>","apa":"Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., &#38; Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. <i>Progress in Additive Manufacturing</i>, 221–231. <a href=\"https://doi.org/10.1007/s40964-018-0044-4\">https://doi.org/10.1007/s40964-018-0044-4</a>","short":"F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.","bibtex":"@article{Hengsbach_Koppa_Holzweissig_Aydinöz_Taube_Hoyer_Starykov_Tonn_Niendorf_Tröster_et al._2018, title={Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers}, DOI={<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>}, journal={Progress in Additive Manufacturing}, author={Hengsbach, Florian and Koppa, Peter and Holzweissig, Martin Joachim and Aydinöz, Mehmet Esat and Taube, Alexander and Hoyer, Kay-Peter and Starykov, Oleksiy and Tonn, Babette and Niendorf, Thomas and Tröster, Thomas and et al.}, year={2018}, pages={221–231} }","mla":"Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” <i>Progress in Additive Manufacturing</i>, 2018, pp. 221–31, doi:<a href=\"https://doi.org/10.1007/s40964-018-0044-4\">10.1007/s40964-018-0044-4</a>."},"user_id":"15952","publication_status":"published","type":"journal_article","year":"2018","publication_identifier":{"issn":["2363-9512","2363-9520"]},"language":[{"iso":"eng"}],"status":"public","publication":"Progress in Additive Manufacturing","date_created":"2020-02-21T14:30:17Z","date_updated":"2025-06-06T08:29:27Z","page":"221-231","_id":"15957"},{"user_id":"48411","publication_status":"published","citation":{"bibtex":"@inbook{Taube_Reschetnik_Pauli_Hoyer_Kullmer_Schaper_2017, place={Wiesbaden}, title={Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen}, DOI={<a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">10.1007/978-3-658-17780-5_13</a>}, booktitle={Additive Fertigung von Bauteilen und Strukturen}, publisher={Springer Vieweg}, author={Taube, Alexander and Reschetnik, Wadim and Pauli, Lorenz and Hoyer, Kay-Peter and Kullmer, Gunter and Schaper, Mirko}, year={2017} }","mla":"Taube, Alexander, et al. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen.” <i>Additive Fertigung von Bauteilen und Strukturen</i>, Springer Vieweg, 2017, doi:<a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">10.1007/978-3-658-17780-5_13</a>.","short":"A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, M. Schaper, in: Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017.","apa":"Taube, A., Reschetnik, W., Pauli, L., Hoyer, K.-P., Kullmer, G., &#38; Schaper, M. (2017). Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen. In <i>Additive Fertigung von Bauteilen und Strukturen</i>. Springer Vieweg. <a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">https://doi.org/10.1007/978-3-658-17780-5_13</a>","ama":"Taube A, Reschetnik W, Pauli L, Hoyer K-P, Kullmer G, Schaper M. Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen. In: <i>Additive Fertigung von Bauteilen und Strukturen</i>. Springer Vieweg; 2017. doi:<a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">10.1007/978-3-658-17780-5_13</a>","ieee":"A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen,” in <i>Additive Fertigung von Bauteilen und Strukturen</i>, Wiesbaden: Springer Vieweg, 2017.","chicago":"Taube, Alexander, Wadim Reschetnik, Lorenz Pauli, Kay-Peter Hoyer, Gunter Kullmer, and Mirko Schaper. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen.” In <i>Additive Fertigung von Bauteilen und Strukturen</i>. Wiesbaden: Springer Vieweg, 2017. <a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">https://doi.org/10.1007/978-3-658-17780-5_13</a>."},"department":[{"_id":"9"},{"_id":"158"},{"_id":"143"}],"author":[{"last_name":"Taube","first_name":"Alexander","full_name":"Taube, Alexander"},{"last_name":"Reschetnik","full_name":"Reschetnik, Wadim","first_name":"Wadim"},{"full_name":"Pauli, Lorenz","first_name":"Lorenz","last_name":"Pauli"},{"id":"48411","last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"},{"last_name":"Kullmer","id":"291","full_name":"Kullmer, Gunter","first_name":"Gunter"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"title":"Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen","doi":"10.1007/978-3-658-17780-5_13","place":"Wiesbaden","_id":"24117","date_updated":"2022-01-06T06:56:07Z","publisher":"Springer Vieweg","publication":"Additive Fertigung von Bauteilen und Strukturen","date_created":"2021-09-10T07:44:05Z","status":"public","publication_identifier":{"isbn":["978-3-658-17779-9","978-3-658-17780-5"]},"type":"book_chapter","year":"2017","language":[{"iso":"ger"}]},{"_id":"24119","page":"11-22","date_updated":"2022-01-06T06:56:07Z","date_created":"2021-09-10T07:53:12Z","publication":"DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen","status":"public","language":[{"iso":"eng"}],"type":"conference","year":"2017","corporate_editor":["Deutscher Verband für Materialforschung und -prüfung e.V."],"user_id":"48411","citation":{"apa":"Brüggemann, J.-P., Reschetnik, W., Kullmer, G., Richard, H. A., Aydinöz, M. E., Hoyer, K.-P., &#38; Schaper, M. (2017). Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, . In Deutscher Verband für Materialforschung und -prüfung e.V. (Ed.), <i>DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen</i> (pp. 11–22).","ama":"Brüggemann J-P, Reschetnik W, Kullmer G, et al. Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, . In: Deutscher Verband für Materialforschung und -prüfung e.V., ed. <i>DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen</i>. ; 2017:11-22.","chicago":"Brüggemann, Jan-Peter, Wadim Reschetnik, Gunter Kullmer, Hans Albert Richard, Mehmet Esat Aydinöz, Kay-Peter Hoyer, and Mirko Schaper. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” In <i>DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen</i>, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 11–22. Berlin, 2017.","ieee":"J.-P. Brüggemann <i>et al.</i>, “Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, ,” in <i>DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen</i>, 2017, pp. 11–22.","mla":"Brüggemann, Jan-Peter, et al. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” <i>DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen</i>, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 11–22.","bibtex":"@inproceedings{Brüggemann_Reschetnik_Kullmer_Richard_Aydinöz_Hoyer_Schaper_2017, place={Berlin}, title={Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, }, booktitle={DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen}, author={Brüggemann, Jan-Peter and Reschetnik, Wadim and Kullmer, Gunter and Richard, Hans Albert and Aydinöz, Mehmet Esat and Hoyer, Kay-Peter and Schaper, Mirko}, editor={Deutscher Verband für Materialforschung und -prüfung e.V.}, year={2017}, pages={11–22} }","short":"J.-P. Brüggemann, W. Reschetnik, G. Kullmer, H.A. Richard, M.E. Aydinöz, K.-P. Hoyer, M. Schaper, in: Deutscher Verband für Materialforschung und -prüfung e.V. (Ed.), DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Berlin, 2017, pp. 11–22."},"department":[{"_id":"9"},{"_id":"158"},{"_id":"143"}],"author":[{"first_name":"Jan-Peter","full_name":"Brüggemann, Jan-Peter","last_name":"Brüggemann"},{"first_name":"Wadim","full_name":"Reschetnik, Wadim","last_name":"Reschetnik"},{"id":"291","last_name":"Kullmer","first_name":"Gunter","full_name":"Kullmer, Gunter"},{"last_name":"Richard","first_name":"Hans Albert","full_name":"Richard, Hans Albert"},{"first_name":"Mehmet Esat","full_name":"Aydinöz, Mehmet Esat","last_name":"Aydinöz"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"}],"title":"Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, ","conference":{"name":"DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen"},"place":"Berlin"},{"citation":{"short":"O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, M. Schaper, Steel Research International (2017).","mla":"Grydin, Olexandr, et al. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” <i>Steel Research International</i>, 1600397, 2017, doi:<a href=\"https://doi.org/10.1002/srin.201600397\">10.1002/srin.201600397</a>.","bibtex":"@article{Grydin_Andreiev_Briukhanov_Briukhanova_Schaper_2017, title={Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling}, DOI={<a href=\"https://doi.org/10.1002/srin.201600397\">10.1002/srin.201600397</a>}, number={1600397}, journal={steel research international}, author={Grydin, Olexandr and Andreiev, Anatolii and Briukhanov, Arkadii and Briukhanova, Zoia and Schaper, Mirko}, year={2017} }","chicago":"Grydin, Olexandr, Anatolii Andreiev, Arkadii Briukhanov, Zoia Briukhanova, and Mirko Schaper. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” <i>Steel Research International</i>, 2017. <a href=\"https://doi.org/10.1002/srin.201600397\">https://doi.org/10.1002/srin.201600397</a>.","ieee":"O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, and M. Schaper, “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling,” <i>steel research international</i>, 2017.","ama":"Grydin O, Andreiev A, Briukhanov A, Briukhanova Z, Schaper M. Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling. <i>steel research international</i>. 2017. doi:<a href=\"https://doi.org/10.1002/srin.201600397\">10.1002/srin.201600397</a>","apa":"Grydin, O., Andreiev, A., Briukhanov, A., Briukhanova, Z., &#38; Schaper, M. (2017). Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling. <i>Steel Research International</i>. <a href=\"https://doi.org/10.1002/srin.201600397\">https://doi.org/10.1002/srin.201600397</a>"},"user_id":"50215","publication_status":"published","department":[{"_id":"158"},{"_id":"321"}],"title":"Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling","author":[{"first_name":"Olexandr","full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin"},{"first_name":"Anatolii","full_name":"Andreiev, Anatolii","last_name":"Andreiev","id":"50215"},{"last_name":"Briukhanov","first_name":"Arkadii","full_name":"Briukhanov, Arkadii"},{"full_name":"Briukhanova, Zoia","first_name":"Zoia","last_name":"Briukhanova"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"}],"doi":"10.1002/srin.201600397","_id":"23904","article_number":"1600397","date_updated":"2022-01-06T06:56:04Z","publication":"steel research international","date_created":"2021-09-08T07:30:56Z","publication_identifier":{"issn":["1611-3683"]},"year":"2017","type":"journal_article","language":[{"iso":"eng"}],"status":"public"},{"author":[{"full_name":"Lossen, Benjamin","first_name":"Benjamin","last_name":"Lossen"},{"first_name":"Anatolii","full_name":"Andreiev, Anatolii","last_name":"Andreiev","id":"50215"},{"full_name":"Homberg, Werner","first_name":"Werner","last_name":"Homberg"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"}],"title":"Friction-Spinning – Possibility of Grain Structure Adjustment","doi":"10.1016/j.proeng.2017.10.933","publication_status":"published","user_id":"50215","citation":{"bibtex":"@article{Lossen_Andreiev_Homberg_Schaper_2017, title={Friction-Spinning – Possibility of Grain Structure Adjustment}, DOI={<a href=\"https://doi.org/10.1016/j.proeng.2017.10.933\">10.1016/j.proeng.2017.10.933</a>}, journal={Procedia Engineering}, author={Lossen, Benjamin and Andreiev, Anatolii and Homberg, Werner and Schaper, Mirko}, year={2017}, pages={1749–1754} }","mla":"Lossen, Benjamin, et al. “Friction-Spinning – Possibility of Grain Structure Adjustment.” <i>Procedia Engineering</i>, 2017, pp. 1749–54, doi:<a href=\"https://doi.org/10.1016/j.proeng.2017.10.933\">10.1016/j.proeng.2017.10.933</a>.","short":"B. Lossen, A. Andreiev, W. Homberg, M. Schaper, Procedia Engineering (2017) 1749–1754.","ama":"Lossen B, Andreiev A, Homberg W, Schaper M. Friction-Spinning – Possibility of Grain Structure Adjustment. <i>Procedia Engineering</i>. 2017:1749-1754. doi:<a href=\"https://doi.org/10.1016/j.proeng.2017.10.933\">10.1016/j.proeng.2017.10.933</a>","apa":"Lossen, B., Andreiev, A., Homberg, W., &#38; Schaper, M. (2017). Friction-Spinning – Possibility of Grain Structure Adjustment. <i>Procedia Engineering</i>, 1749–1754. <a href=\"https://doi.org/10.1016/j.proeng.2017.10.933\">https://doi.org/10.1016/j.proeng.2017.10.933</a>","ieee":"B. Lossen, A. Andreiev, W. Homberg, and M. Schaper, “Friction-Spinning – Possibility of Grain Structure Adjustment,” <i>Procedia Engineering</i>, pp. 1749–1754, 2017.","chicago":"Lossen, Benjamin, Anatolii Andreiev, Werner Homberg, and Mirko Schaper. “Friction-Spinning – Possibility of Grain Structure Adjustment.” <i>Procedia Engineering</i>, 2017, 1749–54. <a href=\"https://doi.org/10.1016/j.proeng.2017.10.933\">https://doi.org/10.1016/j.proeng.2017.10.933</a>."},"department":[{"_id":"158"},{"_id":"321"},{"_id":"156"}],"date_created":"2021-09-08T07:31:59Z","publication":"Procedia Engineering","status":"public","language":[{"iso":"eng"}],"year":"2017","publication_identifier":{"issn":["1877-7058"]},"type":"journal_article","page":"1749-1754","_id":"23909","date_updated":"2022-01-06T06:56:04Z"},{"type":"book_chapter","year":"2017","publication_identifier":{"issn":["2367-1181","2367-1696"]},"language":[{"iso":"eng"}],"status":"public","publication":"Proceedings of the 3rd Pan American Materials Congress","date_created":"2021-09-08T07:32:09Z","date_updated":"2022-01-06T06:56:04Z","_id":"23910","place":"Cham","doi":"10.1007/978-3-319-52132-9_72","title":"A Rapid Heating Method for Press Hardening Processing","author":[{"full_name":"Andreiev, Anatolii","first_name":"Anatolii","id":"50215","last_name":"Andreiev"},{"id":"43822","last_name":"Grydin","full_name":"Grydin, Olexandr","first_name":"Olexandr"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"department":[{"_id":"158"},{"_id":"321"}],"citation":{"short":"A. Andreiev, O. Grydin, M. Schaper, in: Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.","mla":"Andreiev, Anatolii, et al. “A Rapid Heating Method for Press Hardening Processing.” <i>Proceedings of the 3rd Pan American Materials Congress</i>, 2017, doi:<a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">10.1007/978-3-319-52132-9_72</a>.","bibtex":"@inbook{Andreiev_Grydin_Schaper_2017, place={Cham}, title={A Rapid Heating Method for Press Hardening Processing}, DOI={<a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">10.1007/978-3-319-52132-9_72</a>}, booktitle={Proceedings of the 3rd Pan American Materials Congress}, author={Andreiev, Anatolii and Grydin, Olexandr and Schaper, Mirko}, year={2017} }","chicago":"Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “A Rapid Heating Method for Press Hardening Processing.” In <i>Proceedings of the 3rd Pan American Materials Congress</i>. Cham, 2017. <a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">https://doi.org/10.1007/978-3-319-52132-9_72</a>.","ieee":"A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press Hardening Processing,” in <i>Proceedings of the 3rd Pan American Materials Congress</i>, Cham, 2017.","ama":"Andreiev A, Grydin O, Schaper M. A Rapid Heating Method for Press Hardening Processing. In: <i>Proceedings of the 3rd Pan American Materials Congress</i>. Cham; 2017. doi:<a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">10.1007/978-3-319-52132-9_72</a>","apa":"Andreiev, A., Grydin, O., &#38; Schaper, M. (2017). A Rapid Heating Method for Press Hardening Processing. In <i>Proceedings of the 3rd Pan American Materials Congress</i>. Cham. <a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">https://doi.org/10.1007/978-3-319-52132-9_72</a>"},"user_id":"50215","publication_status":"published"},{"department":[{"_id":"9"},{"_id":"158"}],"publication_status":"published","user_id":"48411","citation":{"apa":"Taube, A., Reschetnik, W., Pauli, L., Hoyer, K.-P., Kullmer, G., &#38; Schaper, M. (2017). Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen. In <i>Additive Fertigung von Bauteilen und Strukturen</i>. Springer Fachmedien Wiesbaden. <a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">https://doi.org/10.1007/978-3-658-17780-5_13</a>","ama":"Taube A, Reschetnik W, Pauli L, Hoyer K-P, Kullmer G, Schaper M. Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen. In: <i>Additive Fertigung von Bauteilen Und Strukturen</i>. Springer Fachmedien Wiesbaden; 2017. doi:<a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">10.1007/978-3-658-17780-5_13</a>","ieee":"A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen,” in <i>Additive Fertigung von Bauteilen und Strukturen</i>, Wiesbaden: Springer Fachmedien Wiesbaden, 2017.","chicago":"Taube, Alexander, Wadim Reschetnik, Lorenz Pauli, Kay-Peter Hoyer, Gunter Kullmer, and Mirko Schaper. “Numerische Und Mechanische Untersuchung Additiv Gefertigter TiAl6V4 Gitterstrukturen.” In <i>Additive Fertigung von Bauteilen Und Strukturen</i>. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. <a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">https://doi.org/10.1007/978-3-658-17780-5_13</a>.","bibtex":"@inbook{Taube_Reschetnik_Pauli_Hoyer_Kullmer_Schaper_2017, place={Wiesbaden}, title={Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen}, DOI={<a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">10.1007/978-3-658-17780-5_13</a>}, booktitle={Additive Fertigung von Bauteilen und Strukturen}, publisher={Springer Fachmedien Wiesbaden}, author={Taube, Alexander and Reschetnik, Wadim and Pauli, Lorenz and Hoyer, Kay-Peter and Kullmer, Gunter and Schaper, Mirko}, year={2017} }","mla":"Taube, Alexander, et al. “Numerische Und Mechanische Untersuchung Additiv Gefertigter TiAl6V4 Gitterstrukturen.” <i>Additive Fertigung von Bauteilen Und Strukturen</i>, Springer Fachmedien Wiesbaden, 2017, doi:<a href=\"https://doi.org/10.1007/978-3-658-17780-5_13\">10.1007/978-3-658-17780-5_13</a>.","short":"A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, M. Schaper, in: Additive Fertigung von Bauteilen Und Strukturen, Springer Fachmedien Wiesbaden, Wiesbaden, 2017."},"doi":"10.1007/978-3-658-17780-5_13","place":"Wiesbaden","author":[{"last_name":"Taube","full_name":"Taube, Alexander","first_name":"Alexander"},{"full_name":"Reschetnik, Wadim","first_name":"Wadim","last_name":"Reschetnik"},{"last_name":"Pauli","first_name":"Lorenz","full_name":"Pauli, Lorenz"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","id":"48411"},{"last_name":"Kullmer","id":"291","first_name":"Gunter","full_name":"Kullmer, Gunter"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"}],"title":"Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen","date_updated":"2023-04-27T16:50:24Z","_id":"41529","status":"public","language":[{"iso":"eng"}],"publication_identifier":{"isbn":["9783658177799","9783658177805"]},"year":"2017","type":"book_chapter","publisher":"Springer Fachmedien Wiesbaden","date_created":"2023-02-02T14:47:34Z","publication":"Additive Fertigung von Bauteilen und Strukturen"},{"date_updated":"2023-06-01T14:20:17Z","article_number":"244","_id":"15961","status":"public","year":"2017","type":"journal_article","publication_identifier":{"issn":["2051-8218","2051-8226"]},"language":[{"iso":"eng"}],"quality_controlled":"1","publication":"International Journal of Automotive Composites","date_created":"2020-02-21T14:36:15Z","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"43720","publication_status":"published","citation":{"ieee":"K. A. Weidenmann <i>et al.</i>, “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” <i>International Journal of Automotive Composites</i>, Art. no. 244, 2017, doi: <a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">10.1504/ijautoc.2016.10005303</a>.","chicago":"Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” <i>International Journal of Automotive Composites</i>, 2017. <a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">https://doi.org/10.1504/ijautoc.2016.10005303</a>.","apa":"Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., &#38; Gonzalez, J. S. (2017). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. <i>International Journal of Automotive Composites</i>, Article 244. <a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">https://doi.org/10.1504/ijautoc.2016.10005303</a>","ama":"Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. <i>International Journal of Automotive Composites</i>. Published online 2017. doi:<a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">10.1504/ijautoc.2016.10005303</a>","short":"K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017).","bibtex":"@article{Weidenmann_Pottmeyer_Wang_Tröster_Meiners_Zinn_Schaper_Gonzalez_2017, title={Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids}, DOI={<a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">10.1504/ijautoc.2016.10005303</a>}, number={244}, journal={International Journal of Automotive Composites}, author={Weidenmann, Kay André and Pottmeyer, Florentin and Wang, Zheng and Tröster, Thomas and Meiners, Dieter and Zinn, Carolin and Schaper, Mirko and Gonzalez, Jonathan Serna}, year={2017} }","mla":"Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” <i>International Journal of Automotive Composites</i>, 244, 2017, doi:<a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">10.1504/ijautoc.2016.10005303</a>."},"doi":"10.1504/ijautoc.2016.10005303","author":[{"last_name":"Weidenmann","first_name":"Kay André","full_name":"Weidenmann, Kay André"},{"full_name":"Pottmeyer, Florentin","first_name":"Florentin","last_name":"Pottmeyer"},{"full_name":"Wang, Zheng","first_name":"Zheng","last_name":"Wang"},{"id":"553","last_name":"Tröster","full_name":"Tröster, Thomas","first_name":"Thomas"},{"first_name":"Dieter","full_name":"Meiners, Dieter","last_name":"Meiners"},{"first_name":"Carolin","full_name":"Zinn, Carolin","last_name":"Zinn"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"},{"last_name":"Gonzalez","full_name":"Gonzalez, Jonathan Serna","first_name":"Jonathan Serna"}],"title":"Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids"},{"type":"journal_article","publication":"Materials &amp; Design","quality_controlled":"1","page":"136-142","volume":133,"doi":"10.1016/j.matdes.2017.07.046","title":"Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties","user_id":"15952","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"publication_identifier":{"issn":["0264-1275"]},"year":"2017","language":[{"iso":"eng"}],"status":"public","date_created":"2023-02-02T14:47:57Z","publisher":"Elsevier BV","date_updated":"2025-06-06T08:25:43Z","_id":"41530","intvolume":"       133","author":[{"first_name":"Florian","full_name":"Hengsbach, Florian","id":"14073","last_name":"Hengsbach"},{"last_name":"Koppa","first_name":"Peter","full_name":"Koppa, Peter"},{"first_name":"Kristina","full_name":"Duschik, Kristina","last_name":"Duschik"},{"first_name":"Martin Joachim","full_name":"Holzweissig, Martin Joachim","last_name":"Holzweissig"},{"full_name":"Burns, Madison","first_name":"Madison","last_name":"Burns"},{"last_name":"Nellesen","first_name":"Jens","full_name":"Nellesen, Jens"},{"last_name":"Tillmann","full_name":"Tillmann, Wolfgang","first_name":"Wolfgang"},{"id":"553","last_name":"Tröster","full_name":"Tröster, Thomas","first_name":"Thomas"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"}],"department":[{"_id":"9"},{"_id":"158"},{"_id":"149"},{"_id":"321"}],"citation":{"short":"F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials &#38;amp; Design 133 (2017) 136–142.","bibtex":"@article{Hengsbach_Koppa_Duschik_Holzweissig_Burns_Nellesen_Tillmann_Tröster_Hoyer_Schaper_2017, title={Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties}, volume={133}, DOI={<a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">10.1016/j.matdes.2017.07.046</a>}, journal={Materials &#38;amp; Design}, publisher={Elsevier BV}, author={Hengsbach, Florian and Koppa, Peter and Duschik, Kristina and Holzweissig, Martin Joachim and Burns, Madison and Nellesen, Jens and Tillmann, Wolfgang and Tröster, Thomas and Hoyer, Kay-Peter and Schaper, Mirko}, year={2017}, pages={136–142} }","mla":"Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” <i>Materials &#38;amp; Design</i>, vol. 133, Elsevier BV, 2017, pp. 136–42, doi:<a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">10.1016/j.matdes.2017.07.046</a>.","ieee":"F. Hengsbach <i>et al.</i>, “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” <i>Materials &#38;amp; Design</i>, vol. 133, pp. 136–142, 2017, doi: <a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">10.1016/j.matdes.2017.07.046</a>.","chicago":"Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” <i>Materials &#38;amp; Design</i> 133 (2017): 136–42. <a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">https://doi.org/10.1016/j.matdes.2017.07.046</a>.","ama":"Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. <i>Materials &#38;amp; Design</i>. 2017;133:136-142. doi:<a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">10.1016/j.matdes.2017.07.046</a>","apa":"Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., &#38; Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. <i>Materials &#38;amp; Design</i>, <i>133</i>, 136–142. <a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">https://doi.org/10.1016/j.matdes.2017.07.046</a>"},"publication_status":"published"},{"date_updated":"2025-06-06T08:29:48Z","_id":"16066","status":"public","year":"2017","type":"conference","language":[{"iso":"eng"}],"publication":"Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference","date_created":"2020-02-24T16:41:38Z","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"},{"_id":"219"},{"_id":"158"}],"user_id":"15952","citation":{"short":"D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.","bibtex":"@inproceedings{Ahlers_Koppa_Hengsbach_Gloetter_Altmann_Schaper_Tröster_2017, title={Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing}, booktitle={Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference}, author={Ahlers, Dominik and Koppa, Peter and Hengsbach, Florian and Gloetter, P. and Altmann, A. and Schaper, Mirko and Tröster, Thomas}, year={2017} }","mla":"Ahlers, Dominik, et al. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” <i>Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>, 2017.","ieee":"D. Ahlers <i>et al.</i>, “Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.","chicago":"Ahlers, Dominik, Peter Koppa, Florian Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In <i>Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>, 2017.","apa":"Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M., &#38; Tröster, T. (2017). Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. <i>Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>. 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.","ama":"Ahlers D, Koppa P, Hengsbach F, et al. Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. In: <i>Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>. ; 2017."},"author":[{"first_name":"Dominik","full_name":"Ahlers, Dominik","id":"11207","last_name":"Ahlers"},{"full_name":"Koppa, Peter","first_name":"Peter","last_name":"Koppa"},{"first_name":"Florian","full_name":"Hengsbach, Florian","last_name":"Hengsbach","id":"14073"},{"last_name":"Gloetter","full_name":"Gloetter, P.","first_name":"P."},{"first_name":"A.","full_name":"Altmann, A.","last_name":"Altmann"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"},{"id":"553","last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas"}],"conference":{"location":"Austin, Texas, USA","start_date":"2017-11-08","name":"28th Annual International Solid Freeform Fabrication Symposium 2017","end_date":"2017-11-10"},"title":"Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing"},{"status":"public","language":[{"iso":"eng"}],"type":"journal_article","year":"2017","publication_identifier":{"issn":["0264-1275"]},"date_created":"2021-09-10T07:17:59Z","publication":"Materials & Design","quality_controlled":"1","date_updated":"2025-06-06T08:29:02Z","page":"136-142","_id":"24108","doi":"10.1016/j.matdes.2017.07.046","author":[{"full_name":"Hengsbach, Florian","first_name":"Florian","id":"14073","last_name":"Hengsbach"},{"first_name":"Peter","full_name":"Koppa, Peter","last_name":"Koppa"},{"first_name":"Kristina","full_name":"Duschik, Kristina","last_name":"Duschik"},{"last_name":"Holzweissig","full_name":"Holzweissig, Martin Joachim","first_name":"Martin Joachim"},{"last_name":"Burns","first_name":"Madison","full_name":"Burns, Madison"},{"last_name":"Nellesen","full_name":"Nellesen, Jens","first_name":"Jens"},{"full_name":"Tillmann, Wolfgang","first_name":"Wolfgang","last_name":"Tillmann"},{"id":"553","last_name":"Tröster","full_name":"Tröster, Thomas","first_name":"Thomas"},{"last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"id":"43720","last_name":"Schaper","full_name":"Schaper, Mirko","first_name":"Mirko"}],"title":"Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties","department":[{"_id":"9"},{"_id":"158"},{"_id":"149"},{"_id":"321"}],"publication_status":"published","user_id":"15952","citation":{"mla":"Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” <i>Materials &#38; Design</i>, 2017, pp. 136–42, doi:<a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">10.1016/j.matdes.2017.07.046</a>.","bibtex":"@article{Hengsbach_Koppa_Duschik_Holzweissig_Burns_Nellesen_Tillmann_Tröster_Hoyer_Schaper_2017, title={Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties}, DOI={<a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">10.1016/j.matdes.2017.07.046</a>}, journal={Materials &#38; Design}, author={Hengsbach, Florian and Koppa, Peter and Duschik, Kristina and Holzweissig, Martin Joachim and Burns, Madison and Nellesen, Jens and Tillmann, Wolfgang and Tröster, Thomas and Hoyer, Kay-Peter and Schaper, Mirko}, year={2017}, pages={136–142} }","short":"F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials &#38; Design (2017) 136–142.","apa":"Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., &#38; Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. <i>Materials &#38; Design</i>, 136–142. <a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">https://doi.org/10.1016/j.matdes.2017.07.046</a>","ama":"Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. <i>Materials &#38; Design</i>. Published online 2017:136-142. doi:<a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">10.1016/j.matdes.2017.07.046</a>","chicago":"Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” <i>Materials &#38; Design</i>, 2017, 136–42. <a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">https://doi.org/10.1016/j.matdes.2017.07.046</a>.","ieee":"F. Hengsbach <i>et al.</i>, “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” <i>Materials &#38; Design</i>, pp. 136–142, 2017, doi: <a href=\"https://doi.org/10.1016/j.matdes.2017.07.046\">10.1016/j.matdes.2017.07.046</a>."}},{"type":"journal_article","publication":"Additive Manufacturing","page":"93-102","volume":13,"doi":"10.1016/j.addma.2016.11.006","title":"Hot isostatic pressing of IN718 components manufactured by selective laser melting","keyword":["Industrial and Manufacturing Engineering","Engineering (miscellaneous)","General Materials Science","Biomedical Engineering"],"user_id":"48411","language":[{"iso":"eng"}],"year":"2016","publication_identifier":{"issn":["2214-8604"]},"status":"public","date_created":"2023-02-02T14:49:08Z","publisher":"Elsevier BV","date_updated":"2023-04-27T16:50:19Z","_id":"41532","intvolume":"        13","author":[{"last_name":"Tillmann","first_name":"Wolfgang","full_name":"Tillmann, Wolfgang"},{"first_name":"Christoph","full_name":"Schaak, Christoph","last_name":"Schaak"},{"first_name":"J.","full_name":"Nellesen, J.","last_name":"Nellesen"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"},{"last_name":"Aydinöz","full_name":"Aydinöz, Mehmet Esat","first_name":"Mehmet Esat"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","id":"48411"}],"department":[{"_id":"9"},{"_id":"158"}],"citation":{"short":"W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer, Additive Manufacturing 13 (2016) 93–102.","mla":"Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” <i>Additive Manufacturing</i>, vol. 13, Elsevier BV, 2016, pp. 93–102, doi:<a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">10.1016/j.addma.2016.11.006</a>.","bibtex":"@article{Tillmann_Schaak_Nellesen_Schaper_Aydinöz_Hoyer_2016, title={Hot isostatic pressing of IN718 components manufactured by selective laser melting}, volume={13}, DOI={<a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">10.1016/j.addma.2016.11.006</a>}, journal={Additive Manufacturing}, publisher={Elsevier BV}, author={Tillmann, Wolfgang and Schaak, Christoph and Nellesen, J. and Schaper, Mirko and Aydinöz, Mehmet Esat and Hoyer, Kay-Peter}, year={2016}, pages={93–102} }","chicago":"Tillmann, Wolfgang, Christoph Schaak, J. Nellesen, Mirko Schaper, Mehmet Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” <i>Additive Manufacturing</i> 13 (2016): 93–102. <a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">https://doi.org/10.1016/j.addma.2016.11.006</a>.","ieee":"W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P. Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser melting,” <i>Additive Manufacturing</i>, vol. 13, pp. 93–102, 2016, doi: <a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">10.1016/j.addma.2016.11.006</a>.","apa":"Tillmann, W., Schaak, C., Nellesen, J., Schaper, M., Aydinöz, M. E., &#38; Hoyer, K.-P. (2016). Hot isostatic pressing of IN718 components manufactured by selective laser melting. <i>Additive Manufacturing</i>, <i>13</i>, 93–102. <a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">https://doi.org/10.1016/j.addma.2016.11.006</a>","ama":"Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic pressing of IN718 components manufactured by selective laser melting. <i>Additive Manufacturing</i>. 2016;13:93-102. doi:<a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">10.1016/j.addma.2016.11.006</a>"},"publication_status":"published"},{"citation":{"mla":"Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” <i>International Journal of Automotive Composites</i>, vol. 2, 2016, pp. 272–98, doi:<a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">10.1504/ijautoc.2016.10005305</a>.","bibtex":"@article{Tröster_Schaper_Meschut_Mahnken_Bobbert_Lauter_Zinn_Wang_Dammann_2016, title={Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding}, volume={2}, DOI={<a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">10.1504/ijautoc.2016.10005305</a>}, journal={International Journal of Automotive Composites}, author={Tröster, Thomas and Schaper, Mirko and Meschut, Gerson and Mahnken, Rolf and Bobbert, Mathias and Lauter, Christian and Zinn, Carolin and Wang, Zheng and Dammann, Christian}, year={2016}, pages={272–298} }","short":"T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites 2 (2016) 272–298.","ama":"Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. <i>International Journal of Automotive Composites</i>. 2016;2:272-298. doi:<a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">10.1504/ijautoc.2016.10005305</a>","apa":"Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C., Zinn, C., Wang, Z., &#38; Dammann, C. (2016). Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. <i>International Journal of Automotive Composites</i>, <i>2</i>, 272–298. <a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">https://doi.org/10.1504/ijautoc.2016.10005305</a>","chicago":"Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” <i>International Journal of Automotive Composites</i> 2 (2016): 272–98. <a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">https://doi.org/10.1504/ijautoc.2016.10005305</a>.","ieee":"T. Tröster <i>et al.</i>, “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” <i>International Journal of Automotive Composites</i>, vol. 2, pp. 272–298, 2016, doi: <a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">10.1504/ijautoc.2016.10005305</a>."},"user_id":"72008","publication_status":"published","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"title":"Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding","author":[{"first_name":"Thomas","full_name":"Tröster, Thomas","id":"553","last_name":"Tröster"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"},{"orcid":"0000-0002-2763-1246","id":"32056","last_name":"Meschut","first_name":"Gerson","full_name":"Meschut, Gerson"},{"last_name":"Mahnken","id":"335","first_name":"Rolf","full_name":"Mahnken, Rolf"},{"id":"7850","last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias"},{"last_name":"Lauter","first_name":"Christian","full_name":"Lauter, Christian"},{"last_name":"Zinn","first_name":"Carolin","full_name":"Zinn, Carolin"},{"full_name":"Wang, Zheng","first_name":"Zheng","last_name":"Wang"},{"full_name":"Dammann, Christian","first_name":"Christian","last_name":"Dammann"}],"intvolume":"         2","doi":"10.1504/ijautoc.2016.10005305","page":"272-298","_id":"15963","volume":2,"date_updated":"2023-05-24T08:27:20Z","publication":"International Journal of Automotive Composites","date_created":"2020-02-21T14:38:35Z","year":"2016","publication_identifier":{"issn":["2051-8218","2051-8226"]},"type":"journal_article","language":[{"iso":"eng"}],"status":"public"},{"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"citation":{"apa":"Zinn, C., Bobbert, M., Dammann, C., Wang, Z., Schaper, M., Meschut, G., Mahnken, R., &#38; Tröster, T. (2016). <i>Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften</i>. EuroHybrid, Kaiserslautern.","ama":"Zinn C, Bobbert M, Dammann C, et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. In: ; 2016.","ieee":"C. Zinn <i>et al.</i>, “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” presented at the EuroHybrid, Kaiserslautern, 2016.","chicago":"Zinn, C., Mathias Bobbert, C. Dammann, Z. Wang, Mirko Schaper, Gerson Meschut, Rolf Mahnken, and Thomas Tröster. “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” 2016.","bibtex":"@inproceedings{Zinn_Bobbert_Dammann_Wang_Schaper_Meschut_Mahnken_Tröster_2016, title={Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften}, author={Zinn, C. and Bobbert, Mathias and Dammann, C. and Wang, Z. and Schaper, Mirko and Meschut, Gerson and Mahnken, Rolf and Tröster, Thomas}, year={2016} }","mla":"Zinn, C., et al. <i>Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften</i>. 2016.","short":"C. Zinn, M. Bobbert, C. Dammann, Z. Wang, M. Schaper, G. Meschut, R. Mahnken, T. Tröster, in: 2016."},"user_id":"72008","title":"Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften","conference":{"name":"EuroHybrid","start_date":"2016-04-20","location":"Kaiserslautern","end_date":"2016-04-21"},"author":[{"last_name":"Zinn","full_name":"Zinn, C.","first_name":"C."},{"full_name":"Bobbert, Mathias","first_name":"Mathias","last_name":"Bobbert","id":"7850"},{"full_name":"Dammann, C.","first_name":"C.","last_name":"Dammann"},{"first_name":"Z.","full_name":"Wang, Z.","last_name":"Wang"},{"first_name":"Mirko","full_name":"Schaper, Mirko","last_name":"Schaper","id":"43720"},{"full_name":"Meschut, Gerson","first_name":"Gerson","last_name":"Meschut","id":"32056","orcid":"0000-0002-2763-1246"},{"full_name":"Mahnken, Rolf","first_name":"Rolf","id":"335","last_name":"Mahnken"},{"first_name":"Thomas","full_name":"Tröster, Thomas","id":"553","last_name":"Tröster"}],"date_updated":"2023-05-24T08:27:45Z","_id":"16265","language":[{"iso":"ger"}],"year":"2016","type":"conference","status":"public","date_created":"2020-03-09T09:30:43Z"},{"quality_controlled":"1","publication":"International Journal of Automotive Composites","date_created":"2020-02-27T15:59:58Z","status":"public","publication_identifier":{"issn":["2051-8218","2051-8226"]},"year":"2016","type":"journal_article","language":[{"iso":"eng"}],"_id":"16143","date_updated":"2023-06-01T14:24:51Z","article_number":"244","author":[{"last_name":"Weidenmann","first_name":"Kay André","full_name":"Weidenmann, Kay André"},{"first_name":"Florentin","full_name":"Pottmeyer, Florentin","last_name":"Pottmeyer"},{"last_name":"Wang","full_name":"Wang, Zheng","first_name":"Zheng"},{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster","id":"553"},{"last_name":"Meiners","full_name":"Meiners, Dieter","first_name":"Dieter"},{"full_name":"Zinn, Carolin","first_name":"Carolin","last_name":"Zinn"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"},{"last_name":"Gonzalez","full_name":"Gonzalez, Jonathan Serna","first_name":"Jonathan Serna"}],"title":"Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids","doi":"10.1504/ijautoc.2016.10005303","user_id":"43720","publication_status":"published","citation":{"ieee":"K. A. Weidenmann <i>et al.</i>, “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” <i>International Journal of Automotive Composites</i>, Art. no. 244, 2016, doi: <a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">10.1504/ijautoc.2016.10005303</a>.","chicago":"Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” <i>International Journal of Automotive Composites</i>, 2016. <a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">https://doi.org/10.1504/ijautoc.2016.10005303</a>.","apa":"Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., &#38; Gonzalez, J. S. (2016). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. <i>International Journal of Automotive Composites</i>, Article 244. <a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">https://doi.org/10.1504/ijautoc.2016.10005303</a>","ama":"Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. <i>International Journal of Automotive Composites</i>. Published online 2016. doi:<a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">10.1504/ijautoc.2016.10005303</a>","short":"K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2016).","bibtex":"@article{Weidenmann_Pottmeyer_Wang_Tröster_Meiners_Zinn_Schaper_Gonzalez_2016, title={Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids}, DOI={<a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">10.1504/ijautoc.2016.10005303</a>}, number={244}, journal={International Journal of Automotive Composites}, author={Weidenmann, Kay André and Pottmeyer, Florentin and Wang, Zheng and Tröster, Thomas and Meiners, Dieter and Zinn, Carolin and Schaper, Mirko and Gonzalez, Jonathan Serna}, year={2016} }","mla":"Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” <i>International Journal of Automotive Composites</i>, 244, 2016, doi:<a href=\"https://doi.org/10.1504/ijautoc.2016.10005303\">10.1504/ijautoc.2016.10005303</a>."},"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}]},{"author":[{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster","id":"553"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"},{"orcid":"0000-0002-2763-1246","last_name":"Meschut","id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson"},{"last_name":"Mahnken","id":"335","first_name":"Rolf","full_name":"Mahnken, Rolf"},{"last_name":"Bobbert","id":"7850","full_name":"Bobbert, Mathias","first_name":"Mathias"},{"last_name":"Lauter","full_name":"Lauter, Christian","first_name":"Christian"},{"last_name":"Zinn","full_name":"Zinn, Carolin","first_name":"Carolin"},{"last_name":"Wang","full_name":"Wang, Zheng","first_name":"Zheng"},{"last_name":"Dammann","first_name":"Christian","full_name":"Dammann, Christian"}],"title":"Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding","doi":"10.1504/ijautoc.2016.10005305","publication_status":"published","user_id":"43720","citation":{"short":"T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites (2016).","mla":"Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” <i>International Journal of Automotive Composites</i>, 272, 2016, doi:<a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">10.1504/ijautoc.2016.10005305</a>.","bibtex":"@article{Tröster_Schaper_Meschut_Mahnken_Bobbert_Lauter_Zinn_Wang_Dammann_2016, title={Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding}, DOI={<a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">10.1504/ijautoc.2016.10005305</a>}, number={272}, journal={International Journal of Automotive Composites}, author={Tröster, Thomas and Schaper, Mirko and Meschut, Gerson and Mahnken, Rolf and Bobbert, Mathias and Lauter, Christian and Zinn, Carolin and Wang, Zheng and Dammann, Christian}, year={2016} }","chicago":"Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” <i>International Journal of Automotive Composites</i>, 2016. <a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">https://doi.org/10.1504/ijautoc.2016.10005305</a>.","ieee":"T. Tröster <i>et al.</i>, “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” <i>International Journal of Automotive Composites</i>, Art. no. 272, 2016, doi: <a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">10.1504/ijautoc.2016.10005305</a>.","apa":"Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C., Zinn, C., Wang, Z., &#38; Dammann, C. (2016). Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. <i>International Journal of Automotive Composites</i>, Article 272. <a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">https://doi.org/10.1504/ijautoc.2016.10005305</a>","ama":"Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. <i>International Journal of Automotive Composites</i>. Published online 2016. doi:<a href=\"https://doi.org/10.1504/ijautoc.2016.10005305\">10.1504/ijautoc.2016.10005305</a>"},"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"date_created":"2020-02-27T15:56:46Z","quality_controlled":"1","publication":"International Journal of Automotive Composites","status":"public","language":[{"iso":"eng"}],"publication_identifier":{"issn":["2051-8218","2051-8226"]},"type":"journal_article","year":"2016","_id":"16141","date_updated":"2023-06-01T14:24:36Z","article_number":"272"},{"department":[{"_id":"9"},{"_id":"158"}],"citation":{"ieee":"W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P. Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser melting,” <i>Additive Manufacturing</i>, pp. 93–102, 2016, doi: <a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">10.1016/j.addma.2016.11.006</a>.","chicago":"Tillmann, Wolfgang, Christopher Schaak, Jens Nellesen, Mirko Schaper, Mehmet Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” <i>Additive Manufacturing</i>, 2016, 93–102. <a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">https://doi.org/10.1016/j.addma.2016.11.006</a>.","short":"W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer, Additive Manufacturing (2016) 93–102.","apa":"Tillmann, W., Schaak, C., Nellesen, J., Schaper, M., Aydinöz, M. E., &#38; Hoyer, K.-P. (2016). Hot isostatic pressing of IN718 components manufactured by selective laser melting. <i>Additive Manufacturing</i>, 93–102. <a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">https://doi.org/10.1016/j.addma.2016.11.006</a>","bibtex":"@article{Tillmann_Schaak_Nellesen_Schaper_Aydinöz_Hoyer_2016, title={Hot isostatic pressing of IN718 components manufactured by selective laser melting}, DOI={<a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">10.1016/j.addma.2016.11.006</a>}, journal={Additive Manufacturing}, author={Tillmann, Wolfgang and Schaak, Christopher and Nellesen, Jens and Schaper, Mirko and Aydinöz, Mehmet Esat and Hoyer, Kay-Peter}, year={2016}, pages={93–102} }","ama":"Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic pressing of IN718 components manufactured by selective laser melting. <i>Additive Manufacturing</i>. Published online 2016:93-102. doi:<a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">10.1016/j.addma.2016.11.006</a>","mla":"Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” <i>Additive Manufacturing</i>, 2016, pp. 93–102, doi:<a href=\"https://doi.org/10.1016/j.addma.2016.11.006\">10.1016/j.addma.2016.11.006</a>."},"user_id":"43720","publication_status":"published","doi":"10.1016/j.addma.2016.11.006","title":"Hot isostatic pressing of IN718 components manufactured by selective laser melting","author":[{"last_name":"Tillmann","full_name":"Tillmann, Wolfgang","first_name":"Wolfgang"},{"last_name":"Schaak","first_name":"Christopher","full_name":"Schaak, Christopher"},{"first_name":"Jens","full_name":"Nellesen, Jens","last_name":"Nellesen"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"},{"first_name":"Mehmet Esat","full_name":"Aydinöz, Mehmet Esat","last_name":"Aydinöz"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"}],"date_updated":"2023-06-01T14:24:11Z","page":"93-102","_id":"24110","year":"2016","publication_identifier":{"issn":["2214-8604"]},"type":"journal_article","language":[{"iso":"eng"}],"status":"public","publication":"Additive Manufacturing","quality_controlled":"1","date_created":"2021-09-10T07:20:15Z"}]