[{"department":[{"_id":"9"},{"_id":"158"}],"type":"journal_article","keyword":["Materials Chemistry","Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"date_created":"2023-02-02T14:34:42Z","publication":"Journal of Alloys and Compounds","doi":"10.1016/j.jallcom.2021.159544","language":[{"iso":"eng"}],"article_number":"159544","intvolume":"       871","date_updated":"2023-06-01T14:35:36Z","publication_status":"published","author":[{"id":"44307","full_name":"Krüger, Jan Tobias","first_name":"Jan Tobias","last_name":"Krüger","orcid":"0000-0002-0827-9654"},{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"full_name":"Filor, Viviane","first_name":"Viviane","last_name":"Filor"},{"last_name":"Pramanik","first_name":"Sudipta","full_name":"Pramanik, Sudipta"},{"full_name":"Kietzmann, Manfred","last_name":"Kietzmann","first_name":"Manfred"},{"full_name":"Meißner, Jessica","first_name":"Jessica","last_name":"Meißner"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko","id":"43720"}],"publication_identifier":{"issn":["0925-8388"]},"title":"Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation","year":"2021","quality_controlled":"1","citation":{"short":"J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds 871 (2021).","ama":"Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. <i>Journal of Alloys and Compounds</i>. 2021;871. doi:<a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">10.1016/j.jallcom.2021.159544</a>","chicago":"Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” <i>Journal of Alloys and Compounds</i> 871 (2021). <a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">https://doi.org/10.1016/j.jallcom.2021.159544</a>.","bibtex":"@article{Krüger_Hoyer_Filor_Pramanik_Kietzmann_Meißner_Schaper_2021, title={Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation}, volume={871}, DOI={<a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">10.1016/j.jallcom.2021.159544</a>}, number={159544}, journal={Journal of Alloys and Compounds}, publisher={Elsevier BV}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Filor, Viviane and Pramanik, Sudipta and Kietzmann, Manfred and Meißner, Jessica and Schaper, Mirko}, year={2021} }","mla":"Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” <i>Journal of Alloys and Compounds</i>, vol. 871, 159544, Elsevier BV, 2021, doi:<a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">10.1016/j.jallcom.2021.159544</a>.","apa":"Krüger, J. T., Hoyer, K.-P., Filor, V., Pramanik, S., Kietzmann, M., Meißner, J., &#38; Schaper, M. (2021). Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. <i>Journal of Alloys and Compounds</i>, <i>871</i>, Article 159544. <a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">https://doi.org/10.1016/j.jallcom.2021.159544</a>","ieee":"J. T. Krüger <i>et al.</i>, “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” <i>Journal of Alloys and Compounds</i>, vol. 871, Art. no. 159544, 2021, doi: <a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">10.1016/j.jallcom.2021.159544</a>."},"volume":871,"user_id":"43720","_id":"41514","publisher":"Elsevier BV","status":"public"},{"citation":{"ieee":"B. Křivská <i>et al.</i>, “Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM,” <i>Microscopy and Microanalysis</i>, vol. 27, no. S2, pp. 91–92, 2021, doi: <a href=\"https://doi.org/10.1017/s1431927621013453\">10.1017/s1431927621013453</a>.","apa":"Křivská, B., Šlapáková, M., Minárik, P., Fekete, K., Králík, R., Stolbchenko, M., Schaper, M., &#38; Grydin, O. (2021). Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM. <i>Microscopy and Microanalysis</i>, <i>27</i>(S2), 91–92. <a href=\"https://doi.org/10.1017/s1431927621013453\">https://doi.org/10.1017/s1431927621013453</a>","short":"B. Křivská, M. Šlapáková, P. Minárik, K. Fekete, R. Králík, M. Stolbchenko, M. Schaper, O. Grydin, Microscopy and Microanalysis 27 (2021) 91–92.","chicago":"Křivská, Barbora, Michaela Šlapáková, Peter Minárik, Klaudia Fekete, Rostislav Králík, Mykhailo Stolbchenko, Mirko Schaper, and Olexandr Grydin. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.” <i>Microscopy and Microanalysis</i> 27, no. S2 (2021): 91–92. <a href=\"https://doi.org/10.1017/s1431927621013453\">https://doi.org/10.1017/s1431927621013453</a>.","mla":"Křivská, Barbora, et al. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.” <i>Microscopy and Microanalysis</i>, vol. 27, no. S2, Cambridge University Press (CUP), 2021, pp. 91–92, doi:<a href=\"https://doi.org/10.1017/s1431927621013453\">10.1017/s1431927621013453</a>.","bibtex":"@article{Křivská_Šlapáková_Minárik_Fekete_Králík_Stolbchenko_Schaper_Grydin_2021, title={Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM}, volume={27}, DOI={<a href=\"https://doi.org/10.1017/s1431927621013453\">10.1017/s1431927621013453</a>}, number={S2}, journal={Microscopy and Microanalysis}, publisher={Cambridge University Press (CUP)}, author={Křivská, Barbora and Šlapáková, Michaela and Minárik, Peter and Fekete, Klaudia and Králík, Rostislav and Stolbchenko, Mykhailo and Schaper, Mirko and Grydin, Olexandr}, year={2021}, pages={91–92} }","ama":"Křivská B, Šlapáková M, Minárik P, et al. Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM. <i>Microscopy and Microanalysis</i>. 2021;27(S2):91-92. doi:<a href=\"https://doi.org/10.1017/s1431927621013453\">10.1017/s1431927621013453</a>"},"quality_controlled":"1","_id":"29814","publisher":"Cambridge University Press (CUP)","page":"91-92","volume":27,"user_id":"43720","status":"public","date_created":"2022-02-11T17:39:16Z","department":[{"_id":"158"}],"keyword":["Instrumentation"],"type":"journal_article","issue":"S2","publication":"Microscopy and Microanalysis","language":[{"iso":"eng"}],"doi":"10.1017/s1431927621013453","publication_identifier":{"issn":["1431-9276","1435-8115"]},"author":[{"first_name":"Barbora","last_name":"Křivská","full_name":"Křivská, Barbora"},{"full_name":"Šlapáková, Michaela","last_name":"Šlapáková","first_name":"Michaela"},{"last_name":"Minárik","first_name":"Peter","full_name":"Minárik, Peter"},{"full_name":"Fekete, Klaudia","first_name":"Klaudia","last_name":"Fekete"},{"first_name":"Rostislav","last_name":"Králík","full_name":"Králík, Rostislav"},{"first_name":"Mykhailo","last_name":"Stolbchenko","full_name":"Stolbchenko, Mykhailo"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"}],"year":"2021","title":"Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM","intvolume":"        27","publication_status":"published","date_updated":"2023-06-01T14:38:28Z"},{"doi":"10.1016/j.addma.2021.102087","article_number":"102087","language":[{"iso":"eng"}],"date_updated":"2023-06-01T14:35:58Z","publication_status":"published","intvolume":"        46","title":"Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study","year":"2021","author":[{"last_name":"Pramanik","first_name":"Sudipta","full_name":"Pramanik, Sudipta"},{"last_name":"Tasche","first_name":"Lennart","full_name":"Tasche, Lennart","id":"71508"},{"id":"48411","first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"}],"publication_identifier":{"issn":["2214-8604"]},"type":"journal_article","keyword":["Industrial and Manufacturing Engineering","Engineering (miscellaneous)","General Materials Science","Biomedical Engineering"],"department":[{"_id":"9"},{"_id":"158"}],"date_created":"2023-02-02T14:35:02Z","publication":"Additive Manufacturing","user_id":"43720","volume":46,"_id":"41515","publisher":"Elsevier BV","status":"public","quality_controlled":"1","citation":{"apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., &#38; Schaper, M. (2021). Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. <i>Additive Manufacturing</i>, <i>46</i>, Article 102087. <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">https://doi.org/10.1016/j.addma.2021.102087</a>","ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” <i>Additive Manufacturing</i>, vol. 46, Art. no. 102087, 2021, doi: <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>.","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” <i>Additive Manufacturing</i> 46 (2021). <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">https://doi.org/10.1016/j.addma.2021.102087</a>.","short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46 (2021).","mla":"Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” <i>Additive Manufacturing</i>, vol. 46, 102087, Elsevier BV, 2021, doi:<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>.","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. <i>Additive Manufacturing</i>. 2021;46. doi:<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study}, volume={46}, DOI={<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>}, number={102087}, journal={Additive Manufacturing}, publisher={Elsevier BV}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }"}},{"date_updated":"2023-06-01T14:39:50Z","publication_status":"published","publication_identifier":{"issn":["1059-9495","1544-1024"]},"author":[{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"last_name":"Tasche","first_name":"Lennart","full_name":"Tasche, Lennart"},{"last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"year":"2021","status":"public","title":"Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy","doi":"10.1007/s11665-021-06065-9","user_id":"43720","_id":"24090","language":[{"iso":"eng"}],"quality_controlled":"1","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Within this research, the multiscale microstructural evolution before and after the tensile test of a FeCo alloy is addressed. X-ray <jats:italic>µ</jats:italic>-computer tomography (CT), electron backscattered diffraction (EBSD), and transmission electron microscopy (TEM) are employed to determine the microstructure on different length scales. Microstructural evolution is studied by performing EBSD of the same area before and after the tensile test. As a result, <jats:inline-formula><jats:alternatives><jats:tex-math>$$\\langle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟨</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula>001<jats:inline-formula><jats:alternatives><jats:tex-math>$$\\rangle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟩</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula>||TD, <jats:inline-formula><jats:alternatives><jats:tex-math>$$\\langle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟨</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula>011<jats:inline-formula><jats:alternatives><jats:tex-math>$$\\rangle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟩</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula>||TD are hard orientations and <jats:inline-formula><jats:alternatives><jats:tex-math>$$\\langle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟨</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula>111<jats:inline-formula><jats:alternatives><jats:tex-math>$$\\rangle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟩</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula>||TD is soft orientations for deformation accommodation. It is not possible to predict the deformation of a single grain with the Taylor model. However, the Taylor model accurately predicts the orientation of all grains after deformation. {123}<jats:inline-formula><jats:alternatives><jats:tex-math>$$\\langle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟨</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula>111<jats:inline-formula><jats:alternatives><jats:tex-math>$$\\rangle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟩</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula> is the most active slip system, and {112}<jats:inline-formula><jats:alternatives><jats:tex-math>$$\\langle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟨</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula>111<jats:inline-formula><jats:alternatives><jats:tex-math>$$\\rangle$$</jats:tex-math><mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\">\r\n                <mml:mo>⟩</mml:mo>\r\n              </mml:math></jats:alternatives></jats:inline-formula> is the least active slip system. Both EBSD micrographs show grain subdivision after tensile testing. TEM images show the formation of dislocation cells. Correlative HRTEM images show unresolved lattice fringes at dislocation cell boundaries, whereas resolved lattice fringes are observed at dislocation cell interior. Since Schmid’s law is unable to predict the deformation behavior of grains, the boundary slip transmission accurately predicts the grain deformation behavior.</jats:p>"}],"citation":{"mla":"Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” <i>Journal of Materials Engineering and Performance</i>, 2021, doi:<a href=\"https://doi.org/10.1007/s11665-021-06065-9\">10.1007/s11665-021-06065-9</a>.","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. <i>Journal of Materials Engineering and Performance</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1007/s11665-021-06065-9\">10.1007/s11665-021-06065-9</a>","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy}, DOI={<a href=\"https://doi.org/10.1007/s11665-021-06065-9\">10.1007/s11665-021-06065-9</a>}, journal={Journal of Materials Engineering and Performance}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., &#38; Schaper, M. (2021). Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. <i>Journal of Materials Engineering and Performance</i>. <a href=\"https://doi.org/10.1007/s11665-021-06065-9\">https://doi.org/10.1007/s11665-021-06065-9</a>","ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” <i>Journal of Materials Engineering and Performance</i>, 2021, doi: <a href=\"https://doi.org/10.1007/s11665-021-06065-9\">10.1007/s11665-021-06065-9</a>.","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” <i>Journal of Materials Engineering and Performance</i>, 2021. <a href=\"https://doi.org/10.1007/s11665-021-06065-9\">https://doi.org/10.1007/s11665-021-06065-9</a>.","short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance (2021)."},"publication":"Journal of Materials Engineering and Performance","department":[{"_id":"158"}],"type":"journal_article","date_created":"2021-09-09T15:50:21Z"},{"publication":"Rapid Prototyping Journal","citation":{"apa":"Garthe, K.-U., Hoyer, K.-P., Hagen, L., Tillmann, W., &#38; Schaper, M. (2021). Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. <i>Rapid Prototyping Journal</i>. <a href=\"https://doi.org/10.1108/rpj-01-2021-0017\">https://doi.org/10.1108/rpj-01-2021-0017</a>","ieee":"K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,” <i>Rapid Prototyping Journal</i>, 2021, doi: <a href=\"https://doi.org/10.1108/rpj-01-2021-0017\">10.1108/rpj-01-2021-0017</a>.","chicago":"Garthe, Kai-Uwe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko Schaper. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” <i>Rapid Prototyping Journal</i>, 2021. <a href=\"https://doi.org/10.1108/rpj-01-2021-0017\">https://doi.org/10.1108/rpj-01-2021-0017</a>.","short":"K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, M. Schaper, Rapid Prototyping Journal (2021).","mla":"Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” <i>Rapid Prototyping Journal</i>, 2021, doi:<a href=\"https://doi.org/10.1108/rpj-01-2021-0017\">10.1108/rpj-01-2021-0017</a>.","ama":"Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. <i>Rapid Prototyping Journal</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1108/rpj-01-2021-0017\">10.1108/rpj-01-2021-0017</a>","bibtex":"@article{Garthe_Hoyer_Hagen_Tillmann_Schaper_2021, title={Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior}, DOI={<a href=\"https://doi.org/10.1108/rpj-01-2021-0017\">10.1108/rpj-01-2021-0017</a>}, journal={Rapid Prototyping Journal}, author={Garthe, Kai-Uwe and Hoyer, Kay-Peter and Hagen, Leif and Tillmann, Wolfgang and Schaper, Mirko}, year={2021} }"},"abstract":[{"lang":"eng","text":"<jats:sec>\r\n<jats:title content-type=\"abstract-subheading\">Purpose</jats:title>\r\n<jats:p>The currently existing restrictions regarding the deployment of additively manufactured components because of poor surface roughness, porosity and residual stresses as well as their influence on the low-cycle fatigue (LCF) strength are addressed in this paper.</jats:p>\r\n</jats:sec>\r\n<jats:sec>\r\n<jats:title content-type=\"abstract-subheading\">Design/methodology/approach</jats:title>\r\n<jats:p>This study aims to evaluating the effect of different pre- and post-treatments on the LCF strength of additively manufactured 316L parts. Therefore, 316L specimens manufactured by laser powder bed fusion were examined in their as-built state as well as after grinding, or coating with regard to the surface roughness, residual stresses and LCF strength. To differentiate between topographical effects and residual stress-related phenomena, stress-relieved 316L specimens served as a reference throughout the investigations. To enable an alumina coating of the 316L components, atmospheric plasma spraying was used, and the near-surface residual stresses and the surface roughness are measured and investigated.</jats:p>\r\n</jats:sec>\r\n<jats:sec>\r\n<jats:title content-type=\"abstract-subheading\">Findings</jats:title>\r\n<jats:p>The results have shown that the applied pre- and post-treatments such as stress-relief heat treatment, grinding and alumina coating have each led to an increase in LCF strength of the 316L specimens. In contrast, the non-heat-treated specimens predominantly exhibited coating delamination.</jats:p>\r\n</jats:sec>\r\n<jats:sec>\r\n<jats:title content-type=\"abstract-subheading\">Originality/value</jats:title>\r\n<jats:p>To the best of the authors’ knowledge, this is the first study of the correlation between the LCF behavior of additively manufactured uncoated 316L specimens in comparison with additively manufactured 316L specimens with an alumina coating.</jats:p>\r\n</jats:sec>"}],"quality_controlled":"1","date_created":"2021-11-17T10:00:23Z","type":"journal_article","department":[{"_id":"9"},{"_id":"158"}],"title":"Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior","year":"2021","status":"public","publication_identifier":{"issn":["1355-2546","1355-2546"]},"author":[{"orcid":"0000-0003-0741-3812","first_name":"Kai-Uwe","last_name":"Garthe","full_name":"Garthe, Kai-Uwe","id":"11199"},{"full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter","id":"48411"},{"first_name":"Leif","last_name":"Hagen","full_name":"Hagen, Leif"},{"full_name":"Tillmann, Wolfgang","last_name":"Tillmann","first_name":"Wolfgang"},{"id":"43720","first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko"}],"date_updated":"2023-06-01T14:39:00Z","publication_status":"published","_id":"27509","language":[{"iso":"eng"}],"doi":"10.1108/rpj-01-2021-0017","user_id":"43720"},{"language":[{"iso":"eng"}],"_id":"24087","article_number":"159544","user_id":"43720","doi":"10.1016/j.jallcom.2021.159544","author":[{"full_name":"Krüger, Jan Tobias","first_name":"Jan Tobias","orcid":"0000-0002-0827-9654","last_name":"Krüger","id":"44307"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"last_name":"Filor","first_name":"Viviane","full_name":"Filor, Viviane"},{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"last_name":"Kietzmann","first_name":"Manfred","full_name":"Kietzmann, Manfred"},{"first_name":"Jessica","last_name":"Meißner","full_name":"Meißner, Jessica"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"}],"publication_identifier":{"issn":["0925-8388"]},"year":"2021","status":"public","title":"Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation","publication_status":"published","date_updated":"2023-06-01T14:39:34Z","date_created":"2021-09-09T15:40:39Z","department":[{"_id":"158"}],"type":"journal_article","citation":{"mla":"Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” <i>Journal of Alloys and Compounds</i>, 159544, 2021, doi:<a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">10.1016/j.jallcom.2021.159544</a>.","ama":"Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. <i>Journal of Alloys and Compounds</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">10.1016/j.jallcom.2021.159544</a>","bibtex":"@article{Krüger_Hoyer_Filor_Pramanik_Kietzmann_Meißner_Schaper_2021, title={Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation}, DOI={<a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">10.1016/j.jallcom.2021.159544</a>}, number={159544}, journal={Journal of Alloys and Compounds}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Filor, Viviane and Pramanik, Sudipta and Kietzmann, Manfred and Meißner, Jessica and Schaper, Mirko}, year={2021} }","apa":"Krüger, J. T., Hoyer, K.-P., Filor, V., Pramanik, S., Kietzmann, M., Meißner, J., &#38; Schaper, M. (2021). Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. <i>Journal of Alloys and Compounds</i>, Article 159544. <a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">https://doi.org/10.1016/j.jallcom.2021.159544</a>","ieee":"J. T. Krüger <i>et al.</i>, “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” <i>Journal of Alloys and Compounds</i>, Art. no. 159544, 2021, doi: <a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">10.1016/j.jallcom.2021.159544</a>.","short":"J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds (2021).","chicago":"Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” <i>Journal of Alloys and Compounds</i>, 2021. <a href=\"https://doi.org/10.1016/j.jallcom.2021.159544\">https://doi.org/10.1016/j.jallcom.2021.159544</a>."},"publication":"Journal of Alloys and Compounds","abstract":[{"lang":"eng","text":"Resorbable implants are highly beneficial to reduce patient burden since they need not be removed after a defined period. Currently, magnesium (Mg) and polymers are being applied as bioresorbable materials. However, for some applications the insufficient mechanical properties and high degradation rate of Mg cause the need for new materials. Iron (Fe)-based alloys are promising due to their biocompatibility and good mechanical properties, but their degradation rate is too low and needs to be adapted eg. via alloying with manganese (Mn). Besides, phases with high electrochemical potential lead to increased degradation of residual material with lower potential based on the galvanic coupling. Here, silver (Ag) is promising for the formation of such phases due to its high electrochemical potential (+0.8 V vs. SHE), immiscibility with Fe, biocompatibility, and anti-bacterial properties. Since remaining silver particles can lead to adverse consequences as thrombosis, these particles need to dissolve after the matrix material. Thus a silver alloy with high electrochemical potential, biocompatibility, and adjusted degradation behavior is required as an additive for iron-based bioresorbable materials. Several silver alloying systems are possible, but regarding the electrochemical potential and degradation behavior of binary alloys, calcium (Ca) and lanthanum (La) are best-suited considering their biocompatibility. Accordingly, this research addresses AgCa and AgCaLa alloys as additives for iron-based degradable materials with adapted degradation behavior."}],"quality_controlled":"1"},{"user_id":"43720","doi":"10.3390/met11081304","language":[{"iso":"eng"}],"_id":"23913","article_number":"1304","article_type":"original","publication_status":"published","date_updated":"2023-06-01T14:40:09Z","publication_identifier":{"issn":["2075-4701"]},"author":[{"full_name":"Neuser, Moritz","last_name":"Neuser","first_name":"Moritz"},{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"},{"full_name":"Andreiev, Anatolii","first_name":"Anatolii","last_name":"Andreiev","id":"50215"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"}],"status":"public","year":"2021","title":"Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy","department":[{"_id":"321"}],"type":"journal_article","date_created":"2021-09-08T07:48:28Z","abstract":[{"lang":"eng","text":"<jats:p>Implementing the concept of mixed construction in modern automotive engineering requires the joining of sheet metal or extruded profiles with cast components made from different materials. As weight reduction is desired, these cast components are usually made from high-strength aluminium alloys of the Al-Si (Mn, Mg) system, which have limited weldability. The mechanical joinability of the cast components depends on their ductility, which is influenced by the microstructure. High-strength cast aluminium alloys have relatively low ductility, which leads to cracking of the joints. This limits the range of applications for cast aluminium alloys. In this study, an aluminium alloy of the Al-Si system AlSi9 is used to investigate relationships between solidification conditions during the sand casting process, microstructure, mechanical properties, and joinability. The demonstrator is a stepped plate with a minimum thickness of 2.0 mm and a maximum thickness of 4.0 mm, whereas the thickness difference between neighbour steps amounts to 0.5 mm. During casting trials, the solidification rates for different plate steps were measured. The microscopic investigations reveal a correlation between solidification rates and microstructure parameters such as secondary dendrite arm spacing. Furthermore, mechanical properties and the mechanical joinability are investigated.</jats:p>"}],"quality_controlled":"1","citation":{"apa":"Neuser, M., Grydin, O., Andreiev, A., &#38; Schaper, M. (2021). Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy. <i>Metals</i>, Article 1304. <a href=\"https://doi.org/10.3390/met11081304\">https://doi.org/10.3390/met11081304</a>","ieee":"M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” <i>Metals</i>, Art. no. 1304, 2021, doi: <a href=\"https://doi.org/10.3390/met11081304\">10.3390/met11081304</a>.","short":"M. Neuser, O. Grydin, A. Andreiev, M. Schaper, Metals (2021).","chicago":"Neuser, Moritz, Olexandr Grydin, Anatolii Andreiev, and Mirko Schaper. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” <i>Metals</i>, 2021. <a href=\"https://doi.org/10.3390/met11081304\">https://doi.org/10.3390/met11081304</a>.","mla":"Neuser, Moritz, et al. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” <i>Metals</i>, 1304, 2021, doi:<a href=\"https://doi.org/10.3390/met11081304\">10.3390/met11081304</a>.","ama":"Neuser M, Grydin O, Andreiev A, Schaper M. Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy. <i>Metals</i>. Published online 2021. doi:<a href=\"https://doi.org/10.3390/met11081304\">10.3390/met11081304</a>","bibtex":"@article{Neuser_Grydin_Andreiev_Schaper_2021, title={Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy}, DOI={<a href=\"https://doi.org/10.3390/met11081304\">10.3390/met11081304</a>}, number={1304}, journal={Metals}, author={Neuser, Moritz and Grydin, Olexandr and Andreiev, Anatolii and Schaper, Mirko}, year={2021} }"},"publication":"Metals"},{"citation":{"chicago":"Voswinkel, Dietrich, D. Kloidt, Olexandr Grydin, and Mirko Schaper. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.” <i>Production Engineering</i> 15, no. 2 (2021): 263–70. <a href=\"https://doi.org/10.1007/s11740-020-01006-2\">https://doi.org/10.1007/s11740-020-01006-2</a>.","short":"D. Voswinkel, D. Kloidt, O. Grydin, M. Schaper, Production Engineering 15 (2021) 263–270.","apa":"Voswinkel, D., Kloidt, D., Grydin, O., &#38; Schaper, M. (2021). Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials. <i>Production Engineering</i>, <i>15</i>(2), 263–270. <a href=\"https://doi.org/10.1007/s11740-020-01006-2\">https://doi.org/10.1007/s11740-020-01006-2</a>","ieee":"D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,” <i>Production Engineering</i>, vol. 15, no. 2, pp. 263–270, 2021, doi: <a href=\"https://doi.org/10.1007/s11740-020-01006-2\">10.1007/s11740-020-01006-2</a>.","ama":"Voswinkel D, Kloidt D, Grydin O, Schaper M. Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials. <i>Production Engineering</i>. 2021;15(2):263-270. doi:<a href=\"https://doi.org/10.1007/s11740-020-01006-2\">10.1007/s11740-020-01006-2</a>","bibtex":"@article{Voswinkel_Kloidt_Grydin_Schaper_2021, title={Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials}, volume={15}, DOI={<a href=\"https://doi.org/10.1007/s11740-020-01006-2\">10.1007/s11740-020-01006-2</a>}, number={2}, journal={Production Engineering}, author={Voswinkel, Dietrich and Kloidt, D. and Grydin, Olexandr and Schaper, Mirko}, year={2021}, pages={263–270} }","mla":"Voswinkel, Dietrich, et al. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.” <i>Production Engineering</i>, vol. 15, no. 2, 2021, pp. 263–70, doi:<a href=\"https://doi.org/10.1007/s11740-020-01006-2\">10.1007/s11740-020-01006-2</a>."},"quality_controlled":"1","page":"263-270","_id":"24565","user_id":"43720","volume":15,"status":"public","date_created":"2021-09-16T15:50:59Z","type":"journal_article","department":[{"_id":"158"}],"issue":"2","publication":"Production Engineering","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Laser surface treatment of metals is one option to improve their properties for adhesive bonding. In this paper, a pulsed YVO4 Laser source with a wavelength of 1064 nm and a maximum power of 25 W was utilized to increase the surface area of the steel HCT490X in order to improve its bonding properties with a carbon fibre reinforced polymer (CFRP). Investigated was the influence of the scanning speed of the laser source on the bonding properties. For this purpose, the steel surfaces were ablated at a scanning speed between 1500 and 4500 mm/s. Afterwards the components were bonded with the adhesive HexBond™ 677. After lap shear tests were carried out on the specimen, the surfaces were inspected using scanning electron microscopy (SEM). The experiments revealed that the bonding quality can be improved with a high scanning speed, even when the surface is not completely ablated.</jats:p>"}],"language":[{"iso":"eng"}],"doi":"10.1007/s11740-020-01006-2","title":"Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials","year":"2021","publication_identifier":{"issn":["0944-6524","1863-7353"]},"author":[{"id":"52634","full_name":"Voswinkel, Dietrich","first_name":"Dietrich","last_name":"Voswinkel"},{"full_name":"Kloidt, D.","first_name":"D.","last_name":"Kloidt"},{"full_name":"Grydin, Olexandr","last_name":"Grydin","first_name":"Olexandr","id":"43822"},{"id":"43720","first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko"}],"date_updated":"2023-06-01T14:39:15Z","publication_status":"published","intvolume":"        15","article_type":"original"},{"year":"2021","title":"Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte","author":[{"last_name":"Engelkemeier","first_name":"Katja","full_name":"Engelkemeier, Katja","id":"21743"},{"last_name":"Sun","first_name":"Aijia","full_name":"Sun, Aijia"},{"last_name":"Voswinkel","first_name":"Dietrich","full_name":"Voswinkel, Dietrich","id":"52634"},{"id":"43822","first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"full_name":"Bremser, Wolfgang","last_name":"Bremser","first_name":"Wolfgang"}],"publication_identifier":{"issn":["2196-0216","2196-0216"]},"publication_status":"published","date_updated":"2023-06-01T14:39:27Z","article_type":"review","main_file_link":[{"open_access":"1","url":"https://chemistry-europe.onlinelibrary.wiley.com/doi/10.1002/celc.202100216"}],"language":[{"iso":"eng"}],"doi":"10.1002/celc.202100216","publication":"ChemElectroChem","date_created":"2021-09-16T15:56:58Z","type":"journal_article","department":[{"_id":"158"},{"_id":"301"}],"status":"public","page":"2155-2168","publisher":"Wiley","_id":"24566","user_id":"43720","citation":{"apa":"Engelkemeier, K., Sun, A., Voswinkel, D., Grydin, O., Schaper, M., &#38; Bremser, W. (2021). Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte. <i>ChemElectroChem</i>, 2155–2168. <a href=\"https://doi.org/10.1002/celc.202100216\">https://doi.org/10.1002/celc.202100216</a>","ieee":"K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, and W. Bremser, “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte,” <i>ChemElectroChem</i>, pp. 2155–2168, 2021, doi: <a href=\"https://doi.org/10.1002/celc.202100216\">10.1002/celc.202100216</a>.","chicago":"Engelkemeier, Katja, Aijia Sun, Dietrich Voswinkel, Olexandr Grydin, Mirko Schaper, and Wolfgang Bremser. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” <i>ChemElectroChem</i>, 2021, 2155–68. <a href=\"https://doi.org/10.1002/celc.202100216\">https://doi.org/10.1002/celc.202100216</a>.","short":"K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, W. Bremser, ChemElectroChem (2021) 2155–2168.","mla":"Engelkemeier, Katja, et al. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” <i>ChemElectroChem</i>, Wiley, 2021, pp. 2155–68, doi:<a href=\"https://doi.org/10.1002/celc.202100216\">10.1002/celc.202100216</a>.","ama":"Engelkemeier K, Sun A, Voswinkel D, Grydin O, Schaper M, Bremser W. Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte. <i>ChemElectroChem</i>. Published online 2021:2155-2168. doi:<a href=\"https://doi.org/10.1002/celc.202100216\">10.1002/celc.202100216</a>","bibtex":"@article{Engelkemeier_Sun_Voswinkel_Grydin_Schaper_Bremser_2021, title={Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte}, DOI={<a href=\"https://doi.org/10.1002/celc.202100216\">10.1002/celc.202100216</a>}, journal={ChemElectroChem}, publisher={Wiley}, author={Engelkemeier, Katja and Sun, Aijia and Voswinkel, Dietrich and Grydin, Olexandr and Schaper, Mirko and Bremser, Wolfgang}, year={2021}, pages={2155–2168} }"},"quality_controlled":"1","oa":"1"},{"publication_identifier":{"issn":["0921-5093"]},"author":[{"full_name":"Andreiev, Anatolii","first_name":"Anatolii","last_name":"Andreiev","id":"50215"},{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"full_name":"Dula, Dimitri","last_name":"Dula","first_name":"Dimitri"},{"first_name":"Florian","last_name":"Hengsbach","full_name":"Hengsbach, Florian"},{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"},{"last_name":"Frolov","first_name":"Yaroslav","full_name":"Frolov, Yaroslav"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"title":"Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance","status":"public","year":"2021","date_updated":"2023-06-01T14:40:21Z","publication_status":"published","_id":"23897","language":[{"iso":"eng"}],"article_number":"141662","doi":"10.1016/j.msea.2021.141662","user_id":"43720","citation":{"short":"A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M. Schaper, Materials Science and Engineering: A (2021).","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” <i>Materials Science and Engineering: A</i>, 2021. <a href=\"https://doi.org/10.1016/j.msea.2021.141662\">https://doi.org/10.1016/j.msea.2021.141662</a>.","ieee":"A. Andreiev <i>et al.</i>, “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” <i>Materials Science and Engineering: A</i>, Art. no. 141662, 2021, doi: <a href=\"https://doi.org/10.1016/j.msea.2021.141662\">10.1016/j.msea.2021.141662</a>.","apa":"Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Grydin, O., Frolov, Y., &#38; Schaper, M. (2021). Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. <i>Materials Science and Engineering: A</i>, Article 141662. <a href=\"https://doi.org/10.1016/j.msea.2021.141662\">https://doi.org/10.1016/j.msea.2021.141662</a>","bibtex":"@article{Andreiev_Hoyer_Dula_Hengsbach_Grydin_Frolov_Schaper_2021, title={Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance}, DOI={<a href=\"https://doi.org/10.1016/j.msea.2021.141662\">10.1016/j.msea.2021.141662</a>}, number={141662}, journal={Materials Science and Engineering: A}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach, Florian and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2021} }","ama":"Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. <i>Materials Science and Engineering: A</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1016/j.msea.2021.141662\">10.1016/j.msea.2021.141662</a>","mla":"Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” <i>Materials Science and Engineering: A</i>, 141662, 2021, doi:<a href=\"https://doi.org/10.1016/j.msea.2021.141662\">10.1016/j.msea.2021.141662</a>."},"publication":"Materials Science and Engineering: A","quality_controlled":"1","date_created":"2021-09-08T07:29:29Z","department":[{"_id":"158"},{"_id":"321"}],"type":"journal_article"},{"type":"journal_article","department":[{"_id":"158"},{"_id":"321"}],"date_created":"2021-09-08T07:33:06Z","quality_controlled":"1","publication":"International Journal of Fatigue","citation":{"apa":"Pramanik, S., Andreiev, A., Hoyer, K.-P., &#38; Schaper, M. (2021). Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. <i>International Journal of Fatigue</i>, Article 106498. <a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">https://doi.org/10.1016/j.ijfatigue.2021.106498</a>","ieee":"S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” <i>International Journal of Fatigue</i>, Art. no. 106498, 2021, doi: <a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">10.1016/j.ijfatigue.2021.106498</a>.","chicago":"Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” <i>International Journal of Fatigue</i>, 2021. <a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">https://doi.org/10.1016/j.ijfatigue.2021.106498</a>.","short":"S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue (2021).","mla":"Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” <i>International Journal of Fatigue</i>, 106498, 2021, doi:<a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">10.1016/j.ijfatigue.2021.106498</a>.","ama":"Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. <i>International Journal of Fatigue</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">10.1016/j.ijfatigue.2021.106498</a>","bibtex":"@article{Pramanik_Andreiev_Hoyer_Schaper_2021, title={Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy}, DOI={<a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">10.1016/j.ijfatigue.2021.106498</a>}, number={106498}, journal={International Journal of Fatigue}, author={Pramanik, Sudipta and Andreiev, Anatolii and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }"},"doi":"10.1016/j.ijfatigue.2021.106498","user_id":"43720","article_number":"106498","language":[{"iso":"eng"}],"_id":"23911","date_updated":"2023-06-01T14:40:01Z","publication_status":"published","status":"public","title":"Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy","year":"2021","author":[{"last_name":"Pramanik","first_name":"Sudipta","full_name":"Pramanik, Sudipta"},{"id":"50215","full_name":"Andreiev, Anatolii","first_name":"Anatolii","last_name":"Andreiev"},{"id":"48411","first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"publication_identifier":{"issn":["0142-1123"]}},{"article_number":"102087","language":[{"iso":"eng"}],"_id":"24088","user_id":"43720","doi":"10.1016/j.addma.2021.102087","status":"public","title":"Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study","year":"2021","author":[{"full_name":"Pramanik, Sudipta","first_name":"Sudipta","last_name":"Pramanik"},{"full_name":"Tasche, Lennart","first_name":"Lennart","last_name":"Tasche"},{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720"}],"publication_identifier":{"issn":["2214-8604"]},"publication_status":"published","date_updated":"2023-06-01T14:39:43Z","date_created":"2021-09-09T15:46:30Z","type":"journal_article","department":[{"_id":"158"}],"publication":"Additive Manufacturing","citation":{"ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” <i>Additive Manufacturing</i>, Art. no. 102087, 2021, doi: <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>.","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., &#38; Schaper, M. (2021). Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. <i>Additive Manufacturing</i>, Article 102087. <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">https://doi.org/10.1016/j.addma.2021.102087</a>","short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing (2021).","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” <i>Additive Manufacturing</i>, 2021. <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">https://doi.org/10.1016/j.addma.2021.102087</a>.","mla":"Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” <i>Additive Manufacturing</i>, 102087, 2021, doi:<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>.","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study}, DOI={<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>}, number={102087}, journal={Additive Manufacturing}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. <i>Additive Manufacturing</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>"},"quality_controlled":"1"},{"user_id":"43720","_id":"23803","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1","url":"https://tu-freiberg.de/sites/default/files/media/institut-fuer-metallformung-13630/MEFORM2020/meform_2021_journal.pdf"}],"date_updated":"2023-06-01T14:40:32Z","publication_status":"published","conference":{"start_date":"2021-03-18","name":"Meform 2021","location":"Freiberg"},"author":[{"id":"24803","orcid":"0000-0001-9047-467X","first_name":"Alexander","last_name":"Reitz","full_name":"Reitz, Alexander"},{"id":"43822","last_name":"Grydin","first_name":"Olexandr","full_name":"Grydin, Olexandr"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"status":"public","year":"2021","title":"Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ","oa":"1","department":[{"_id":"158"},{"_id":"321"}],"type":"journal_article","date_created":"2021-09-06T13:28:04Z","quality_controlled":"1","citation":{"mla":"Reitz, Alexander, et al. “Characterization of Phase Transformations during Graded Thermo- Mechanical Treatment of Steel 22MnB5 by Means of Optical Methods .” <i>Materials Data for Smart Forming Technologies</i>, 2021.","bibtex":"@article{Reitz_Grydin_Schaper_2021, title={Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods }, journal={Materials Data for Smart Forming Technologies}, author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2021} }","ama":"Reitz A, Grydin O, Schaper M. Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods . <i>Materials Data for Smart Forming Technologies</i>. Published online 2021.","ieee":"A. Reitz, O. Grydin, and M. Schaper, “Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ,” <i>Materials Data for Smart Forming Technologies</i>, 2021.","apa":"Reitz, A., Grydin, O., &#38; Schaper, M. (2021). Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods . <i>Materials Data for Smart Forming Technologies</i>. Meform 2021, Freiberg.","chicago":"Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization of Phase Transformations during Graded Thermo- Mechanical Treatment of Steel 22MnB5 by Means of Optical Methods .” <i>Materials Data for Smart Forming Technologies</i>, 2021.","short":"A. Reitz, O. Grydin, M. Schaper, Materials Data for Smart Forming Technologies (2021)."},"publication":"Materials Data for Smart Forming Technologies"},{"date_updated":"2025-04-04T10:38:20Z","publication_status":"published","status":"public","title":"Surface modifications reducing the adhesion of aluminum in twin roll casting applications","year":"2021","conference":{"location":"Virtual Conference","start_date":"2021-11-02","name":"4th International Conference on Light Materials - Science and Technology (LIGHTMAT2021)","end_date":"2021-11-04"},"user_id":"13858","editor":[{"full_name":"Paschke, Hanno","last_name":"Paschke","first_name":"Hanno"},{"id":"13858","last_name":"Lauth","first_name":"Martin","full_name":"Lauth, Martin"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"last_name":"Brückner","first_name":"Tristan","full_name":"Brückner, Tristan"},{"full_name":"Thewes, Alexander","last_name":"Thewes","first_name":"Alexander"}],"_id":"58117","language":[{"iso":"eng"}],"citation":{"short":"H. Paschke, M. Lauth, M. Schaper, T. Brückner, A. Thewes, eds., Surface Modifications Reducing the Adhesion of Aluminum in Twin Roll Casting Applications, 2021.","chicago":"Paschke, Hanno, Martin Lauth, Mirko Schaper, Tristan Brückner, and Alexander Thewes, eds. <i>Surface Modifications Reducing the Adhesion of Aluminum in Twin Roll Casting Applications</i>, 2021.","ieee":"H. Paschke, M. Lauth, M. Schaper, T. Brückner, and A. Thewes, Eds., <i>Surface modifications reducing the adhesion of aluminum in twin roll casting applications</i>. 2021.","apa":"Paschke, H., Lauth, M., Schaper, M., Brückner, T., &#38; Thewes, A. (Eds.). (2021). <i>Surface modifications reducing the adhesion of aluminum in twin roll casting applications</i>.","bibtex":"@book{Paschke_Lauth_Schaper_Brückner_Thewes_2021, title={Surface modifications reducing the adhesion of aluminum in twin roll casting applications}, year={2021} }","ama":"Paschke H, Lauth M, Schaper M, Brückner T, Thewes A, eds. <i>Surface Modifications Reducing the Adhesion of Aluminum in Twin Roll Casting Applications</i>.; 2021.","mla":"Paschke, Hanno, et al., editors. <i>Surface Modifications Reducing the Adhesion of Aluminum in Twin Roll Casting Applications</i>. 2021."},"type":"conference_editor","department":[{"_id":"158"}],"date_created":"2025-01-09T08:38:56Z"},{"citation":{"bibtex":"@article{Camberg_Andreiev_Pramanik_Hoyer_Tröster_Schaper_2021, title={Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks}, volume={831}, DOI={<a href=\"https://doi.org/10.1016/j.msea.2021.142312\">10.1016/j.msea.2021.142312</a>}, number={142312}, journal={Materials Science and Engineering: A}, publisher={Elsevier BV}, author={Camberg, Alan Adam and Andreiev, Anatolii and Pramanik, Sudipta and Hoyer, Kay-Peter and Tröster, Thomas and Schaper, Mirko}, year={2021} }","ama":"Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. <i>Materials Science and Engineering: A</i>. 2021;831. doi:<a href=\"https://doi.org/10.1016/j.msea.2021.142312\">10.1016/j.msea.2021.142312</a>","mla":"Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” <i>Materials Science and Engineering: A</i>, vol. 831, 142312, Elsevier BV, 2021, doi:<a href=\"https://doi.org/10.1016/j.msea.2021.142312\">10.1016/j.msea.2021.142312</a>.","chicago":"Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” <i>Materials Science and Engineering: A</i> 831 (2021). <a href=\"https://doi.org/10.1016/j.msea.2021.142312\">https://doi.org/10.1016/j.msea.2021.142312</a>.","short":"A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A 831 (2021).","ieee":"A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” <i>Materials Science and Engineering: A</i>, vol. 831, Art. no. 142312, 2021, doi: <a href=\"https://doi.org/10.1016/j.msea.2021.142312\">10.1016/j.msea.2021.142312</a>.","apa":"Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., &#38; Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. <i>Materials Science and Engineering: A</i>, <i>831</i>, Article 142312. <a href=\"https://doi.org/10.1016/j.msea.2021.142312\">https://doi.org/10.1016/j.msea.2021.142312</a>"},"status":"public","user_id":"15952","volume":831,"_id":"41508","publisher":"Elsevier BV","publication":"Materials Science and Engineering: A","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"department":[{"_id":"9"},{"_id":"158"},{"_id":"149"},{"_id":"321"}],"date_created":"2023-02-02T14:31:53Z","publication_status":"published","date_updated":"2025-06-06T08:07:18Z","intvolume":"       831","year":"2021","title":"Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks","author":[{"id":"60544","last_name":"Camberg","first_name":"Alan Adam","full_name":"Camberg, Alan Adam"},{"id":"50215","first_name":"Anatolii","last_name":"Andreiev","full_name":"Andreiev, Anatolii"},{"full_name":"Pramanik, Sudipta","first_name":"Sudipta","last_name":"Pramanik"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"id":"553","last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"publication_identifier":{"issn":["0921-5093"]},"doi":"10.1016/j.msea.2021.142312","article_number":"142312","language":[{"iso":"eng"}]},{"department":[{"_id":"9"},{"_id":"158"},{"_id":"149"},{"_id":"321"}],"type":"journal_article","date_created":"2021-11-22T12:05:46Z","quality_controlled":"1","citation":{"ieee":"A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” <i>Materials Science and Engineering: A</i>, Art. no. 142312, 2021, doi: <a href=\"https://doi.org/10.1016/j.msea.2021.142312\">10.1016/j.msea.2021.142312</a>.","apa":"Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., &#38; Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. <i>Materials Science and Engineering: A</i>, Article 142312. <a href=\"https://doi.org/10.1016/j.msea.2021.142312\">https://doi.org/10.1016/j.msea.2021.142312</a>","chicago":"Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” <i>Materials Science and Engineering: A</i>, 2021. <a href=\"https://doi.org/10.1016/j.msea.2021.142312\">https://doi.org/10.1016/j.msea.2021.142312</a>.","short":"A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A (2021).","mla":"Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” <i>Materials Science and Engineering: A</i>, 142312, Elsevier, 2021, doi:<a href=\"https://doi.org/10.1016/j.msea.2021.142312\">10.1016/j.msea.2021.142312</a>.","bibtex":"@article{Camberg_Andreiev_Pramanik_Hoyer_Tröster_Schaper_2021, title={Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks}, DOI={<a href=\"https://doi.org/10.1016/j.msea.2021.142312\">10.1016/j.msea.2021.142312</a>}, number={142312}, journal={Materials Science and Engineering: A}, publisher={Elsevier}, author={Camberg, Alan Adam and Andreiev, Anatolii and Pramanik, Sudipta and Hoyer, Kay-Peter and Tröster, Thomas and Schaper, Mirko}, year={2021} }","ama":"Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. <i>Materials Science and Engineering: A</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1016/j.msea.2021.142312\">10.1016/j.msea.2021.142312</a>"},"publication":"Materials Science and Engineering: A","user_id":"15952","doi":"10.1016/j.msea.2021.142312","language":[{"iso":"eng"}],"_id":"27700","publisher":"Elsevier","article_number":"142312","publication_status":"published","date_updated":"2025-06-06T08:06:32Z","publication_identifier":{"issn":["0921-5093"]},"author":[{"id":"60544","last_name":"Camberg","first_name":"Alan Adam","full_name":"Camberg, Alan Adam"},{"id":"50215","full_name":"Andreiev, Anatolii","first_name":"Anatolii","last_name":"Andreiev"},{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter","id":"48411"},{"id":"553","first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"title":"Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks","year":"2021","status":"public"},{"quality_controlled":"1","citation":{"apa":"Drossel, W.-G., Bobbert, M., Böhme, M., Dammann, C., Dittes, A., Gießmann, M., Hühne, C., Ihlemann, J., Kießling, R., Lampke, T., Lenz, P., Mahnken, R., Meschut, G., Müller, R., Nier, M., Prussak, R., Riemer, M., Sander, S., Schaper, M., … Zinn, C. (2021). Hybridprofile für Trag- und Crashstrukturen. In <i>Intrinsische Hybridverbunde für Leichtbautragstrukturen</i>. <a href=\"https://doi.org/10.1007/978-3-662-62833-1_3\">https://doi.org/10.1007/978-3-662-62833-1_3</a>","ieee":"W.-G. Drossel <i>et al.</i>, “Hybridprofile für Trag- und Crashstrukturen,” in <i>Intrinsische Hybridverbunde für Leichtbautragstrukturen</i>, Berlin, Heidelberg, 2021.","chicago":"Drossel, Welf-G, Mathias Bobbert, Marcus Böhme, Christian Dammann, Axel Dittes, Mina Gießmann, Christian Hühne, et al. “Hybridprofile Für Trag- Und Crashstrukturen.” In <i>Intrinsische Hybridverbunde Für Leichtbautragstrukturen</i>. Berlin, Heidelberg, 2021. <a href=\"https://doi.org/10.1007/978-3-662-62833-1_3\">https://doi.org/10.1007/978-3-662-62833-1_3</a>.","short":"W.-G. Drossel, M. Bobbert, M. Böhme, C. Dammann, A. Dittes, M. Gießmann, C. Hühne, J. Ihlemann, R. Kießling, T. Lampke, P. Lenz, R. Mahnken, G. Meschut, R. Müller, M. Nier, R. Prussak, M. Riemer, S. Sander, M. Schaper, I. Scharf, M. Scholze, S.-D. Schwöbel, S. Sharafiev, M. Sinapius, D. Stefaniak, T. Tröster, M.F.-X. Wagner, Z. Wang, C. Zinn, in: Intrinsische Hybridverbunde Für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.","mla":"Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” <i>Intrinsische Hybridverbunde Für Leichtbautragstrukturen</i>, 2021, doi:<a href=\"https://doi.org/10.1007/978-3-662-62833-1_3\">10.1007/978-3-662-62833-1_3</a>.","ama":"Drossel W-G, Bobbert M, Böhme M, et al. Hybridprofile für Trag- und Crashstrukturen. In: <i>Intrinsische Hybridverbunde Für Leichtbautragstrukturen</i>. ; 2021. doi:<a href=\"https://doi.org/10.1007/978-3-662-62833-1_3\">10.1007/978-3-662-62833-1_3</a>","bibtex":"@inbook{Drossel_Bobbert_Böhme_Dammann_Dittes_Gießmann_Hühne_Ihlemann_Kießling_Lampke_et al._2021, place={Berlin, Heidelberg}, title={Hybridprofile für Trag- und Crashstrukturen}, DOI={<a href=\"https://doi.org/10.1007/978-3-662-62833-1_3\">10.1007/978-3-662-62833-1_3</a>}, booktitle={Intrinsische Hybridverbunde für Leichtbautragstrukturen}, author={Drossel, Welf-G and Bobbert, Mathias and Böhme, Marcus and Dammann, Christian and Dittes, Axel and Gießmann, Mina and Hühne, Christian and Ihlemann, Jörn and Kießling, Robert and Lampke, Thomas and et al.}, year={2021} }"},"publication":"Intrinsische Hybridverbunde für Leichtbautragstrukturen","department":[{"_id":"9"},{"_id":"154"},{"_id":"321"},{"_id":"149"}],"type":"book_chapter","place":"Berlin, Heidelberg","date_created":"2021-12-22T12:29:50Z","date_updated":"2025-06-06T08:09:10Z","publication_status":"published","author":[{"last_name":"Drossel","first_name":"Welf-G","full_name":"Drossel, Welf-G"},{"last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias","id":"7850"},{"full_name":"Böhme, Marcus","last_name":"Böhme","first_name":"Marcus"},{"full_name":"Dammann, Christian","last_name":"Dammann","first_name":"Christian"},{"first_name":"Axel","last_name":"Dittes","full_name":"Dittes, Axel"},{"last_name":"Gießmann","first_name":"Mina","full_name":"Gießmann, Mina"},{"first_name":"Christian","last_name":"Hühne","full_name":"Hühne, Christian"},{"full_name":"Ihlemann, Jörn","first_name":"Jörn","last_name":"Ihlemann"},{"full_name":"Kießling, Robert","first_name":"Robert","last_name":"Kießling"},{"full_name":"Lampke, Thomas","first_name":"Thomas","last_name":"Lampke"},{"last_name":"Lenz","first_name":"Peter","full_name":"Lenz, Peter","id":"49691"},{"full_name":"Mahnken, Rolf","first_name":"Rolf","last_name":"Mahnken","id":"335"},{"id":"32056","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson","full_name":"Meschut, Gerson"},{"full_name":"Müller, Roland","last_name":"Müller","first_name":"Roland"},{"first_name":"Matthias","last_name":"Nier","full_name":"Nier, Matthias"},{"first_name":"Robert","last_name":"Prussak","full_name":"Prussak, Robert"},{"full_name":"Riemer, Matthias","last_name":"Riemer","first_name":"Matthias"},{"full_name":"Sander, Sascha","first_name":"Sascha","last_name":"Sander","id":"23175"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"last_name":"Scharf","first_name":"Ingolf","full_name":"Scharf, Ingolf"},{"full_name":"Scholze, Mario","first_name":"Mario","last_name":"Scholze"},{"last_name":"Schwöbel","first_name":"Stephan-Daniel","full_name":"Schwöbel, Stephan-Daniel"},{"full_name":"Sharafiev, Semen","first_name":"Semen","last_name":"Sharafiev"},{"full_name":"Sinapius, Michael","first_name":"Michael","last_name":"Sinapius"},{"first_name":"Daniel","last_name":"Stefaniak","full_name":"Stefaniak, Daniel"},{"id":"553","last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas"},{"full_name":"Wagner, Martin F. -X.","first_name":"Martin F. -X.","last_name":"Wagner"},{"last_name":"Wang","first_name":"Zheng","full_name":"Wang, Zheng"},{"full_name":"Zinn, Carolin","last_name":"Zinn","first_name":"Carolin"}],"publication_identifier":{"isbn":["9783662628324","9783662628331"]},"title":"Hybridprofile für Trag- und Crashstrukturen","status":"public","year":"2021","doi":"10.1007/978-3-662-62833-1_3","user_id":"15952","language":[{"iso":"eng"}],"_id":"29086"},{"type":"journal_article","department":[{"_id":"158"},{"_id":"149"},{"_id":"146"},{"_id":"321"},{"_id":"9"}],"date_created":"2021-09-08T07:29:43Z","quality_controlled":"1","publication":"Journal of Materials Processing Technology","citation":{"chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” <i>Journal of Materials Processing Technology</i>, 2021. <a href=\"https://doi.org/10.1016/j.jmatprotec.2021.117183\">https://doi.org/10.1016/j.jmatprotec.2021.117183</a>.","short":"A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, M. Haase, J. Gierse, D. Zimmer, T. Tröster, M. Schaper, Journal of Materials Processing Technology (2021).","ieee":"A. Andreiev <i>et al.</i>, “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,” <i>Journal of Materials Processing Technology</i>, Art. no. 117183, 2021, doi: <a href=\"https://doi.org/10.1016/j.jmatprotec.2021.117183\">10.1016/j.jmatprotec.2021.117183</a>.","apa":"Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Haase, M., Gierse, J., Zimmer, D., Tröster, T., &#38; Schaper, M. (2021). Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. <i>Journal of Materials Processing Technology</i>, Article 117183. <a href=\"https://doi.org/10.1016/j.jmatprotec.2021.117183\">https://doi.org/10.1016/j.jmatprotec.2021.117183</a>","bibtex":"@article{Andreiev_Hoyer_Dula_Hengsbach_Haase_Gierse_Zimmer_Tröster_Schaper_2021, title={Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section}, DOI={<a href=\"https://doi.org/10.1016/j.jmatprotec.2021.117183\">10.1016/j.jmatprotec.2021.117183</a>}, number={117183}, journal={Journal of Materials Processing Technology}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach, Florian and Haase, Michael and Gierse, Jan and Zimmer, Detmar and Tröster, Thomas and Schaper, Mirko}, year={2021} }","ama":"Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. <i>Journal of Materials Processing Technology</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1016/j.jmatprotec.2021.117183\">10.1016/j.jmatprotec.2021.117183</a>","mla":"Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” <i>Journal of Materials Processing Technology</i>, 117183, 2021, doi:<a href=\"https://doi.org/10.1016/j.jmatprotec.2021.117183\">10.1016/j.jmatprotec.2021.117183</a>."},"doi":"10.1016/j.jmatprotec.2021.117183","user_id":"15952","article_number":"117183","_id":"23898","language":[{"iso":"eng"}],"date_updated":"2025-06-06T08:10:24Z","publication_status":"published","year":"2021","title":"Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section","status":"public","author":[{"id":"50215","last_name":"Andreiev","first_name":"Anatolii","full_name":"Andreiev, Anatolii"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"full_name":"Dula, Dimitri","first_name":"Dimitri","last_name":"Dula"},{"full_name":"Hengsbach, Florian","first_name":"Florian","last_name":"Hengsbach","id":"14073"},{"id":"35970","full_name":"Haase, Michael","last_name":"Haase","first_name":"Michael"},{"id":"28610","last_name":"Gierse","first_name":"Jan","full_name":"Gierse, Jan"},{"last_name":"Zimmer","first_name":"Detmar","full_name":"Zimmer, Detmar","id":"604"},{"id":"553","last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"publication_identifier":{"issn":["0924-0136"]}},{"publication":"Proc. 20th Conference of Czech and Slovak Physicists","citation":{"chicago":"Krivská, Barbora, Michaela Šlapáková, Martin Kihoulou, Rostislav Králík, Lucia Bajtošová, Miroslav Cieslar, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “Interdiffusion in Aluminum-Steel Clad Strip.” In <i>Proc. 20th Conference of Czech and Slovak Physicists</i>, 153–54, 2020.","short":"B. Krivská, M. Šlapáková, M. Kihoulou, R. Králík, L. Bajtošová, M. Cieslar, O. Grydin, M. Stolbchenko, M. Schaper, in: Proc. 20th Conference of Czech and Slovak Physicists, 2020, pp. 153–154.","ieee":"B. Krivská <i>et al.</i>, “Interdiffusion in aluminum-steel clad strip,” in <i>Proc. 20th Conference of Czech and Slovak Physicists</i>, Prague, 2020, pp. 153–154.","apa":"Krivská, B., Šlapáková, M., Kihoulou, M., Králík, R., Bajtošová, L., Cieslar, M., Grydin, O., Stolbchenko, M., &#38; Schaper, M. (2020). Interdiffusion in aluminum-steel clad strip. <i>Proc. 20th Conference of Czech and Slovak Physicists</i>, 153–154.","bibtex":"@inproceedings{Krivská_Šlapáková_Kihoulou_Králík_Bajtošová_Cieslar_Grydin_Stolbchenko_Schaper_2020, title={Interdiffusion in aluminum-steel clad strip}, booktitle={Proc. 20th Conference of Czech and Slovak Physicists}, author={Krivská, Barbora and Šlapáková, Michaela and Kihoulou, Martin and Králík, Rostislav and Bajtošová, Lucia and Cieslar, Miroslav and Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}, year={2020}, pages={153–154} }","ama":"Krivská B, Šlapáková M, Kihoulou M, et al. Interdiffusion in aluminum-steel clad strip. In: <i>Proc. 20th Conference of Czech and Slovak Physicists</i>. ; 2020:153-154.","mla":"Krivská, Barbora, et al. “Interdiffusion in Aluminum-Steel Clad Strip.” <i>Proc. 20th Conference of Czech and Slovak Physicists</i>, 2020, pp. 153–54."},"type":"conference","department":[{"_id":"158"}],"date_created":"2021-09-16T16:16:14Z","date_updated":"2022-01-06T06:56:27Z","publication_status":"published","title":"Interdiffusion in aluminum-steel clad strip","status":"public","year":"2020","conference":{"start_date":"2020-09-07","name":"20th Conference of Czech and Slovak Physicists","location":"Prague","end_date":"2020-09-10"},"author":[{"full_name":"Krivská, Barbora","last_name":"Krivská","first_name":"Barbora"},{"full_name":"Šlapáková, Michaela","last_name":"Šlapáková","first_name":"Michaela"},{"full_name":"Kihoulou, Martin","first_name":"Martin","last_name":"Kihoulou"},{"last_name":"Králík","first_name":"Rostislav","full_name":"Králík, Rostislav"},{"full_name":"Bajtošová, Lucia","first_name":"Lucia","last_name":"Bajtošová"},{"first_name":"Miroslav","last_name":"Cieslar","full_name":"Cieslar, Miroslav"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"full_name":"Stolbchenko, Mykhailo","last_name":"Stolbchenko","first_name":"Mykhailo"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko","id":"43720"}],"user_id":"43822","page":"153-154","language":[{"iso":"eng"}],"_id":"24567"},{"date_created":"2021-09-06T13:24:55Z","place":"Cham","type":"book_chapter","department":[{"_id":"158"},{"_id":"321"}],"publication":"The Minerals, Metals & Materials Series","citation":{"ieee":"A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in <i>The Minerals, Metals &#38; Materials Series</i>, Cham: Springer, 2020.","apa":"Reitz, A., Grydin, O., &#38; Schaper, M. (2020). Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts. In <i>The Minerals, Metals &#38; Materials Series</i>. Springer. <a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">https://doi.org/10.1007/978-3-030-36628-5_7</a>","chicago":"Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” In <i>The Minerals, Metals &#38; Materials Series</i>. Cham: Springer, 2020. <a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">https://doi.org/10.1007/978-3-030-36628-5_7</a>.","short":"A. Reitz, O. Grydin, M. Schaper, in: The Minerals, Metals &#38; Materials Series, Springer, Cham, 2020.","mla":"Reitz, Alexander, et al. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” <i>The Minerals, Metals &#38; Materials Series</i>, Springer, 2020, doi:<a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">10.1007/978-3-030-36628-5_7</a>.","bibtex":"@inbook{Reitz_Grydin_Schaper_2020, place={Cham}, title={Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts}, DOI={<a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">10.1007/978-3-030-36628-5_7</a>}, booktitle={The Minerals, Metals &#38; Materials Series}, publisher={Springer}, author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2020} }","ama":"Reitz A, Grydin O, Schaper M. Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts. In: <i>The Minerals, Metals &#38; Materials Series</i>. Springer; 2020. doi:<a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">10.1007/978-3-030-36628-5_7</a>"},"quality_controlled":"1","main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-030-36628-5_7"}],"_id":"23801","publisher":"Springer","language":[{"iso":"eng"}],"user_id":"24803","doi":"10.1007/978-3-030-36628-5_7","status":"public","title":"Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts","year":"2020","publication_identifier":{"issn":["2367-1181","2367-1696"]},"author":[{"first_name":"Alexander","last_name":"Reitz","orcid":"0000-0001-9047-467X","full_name":"Reitz, Alexander","id":"24803"},{"full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin","id":"43822"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"}],"publication_status":"published","date_updated":"2022-01-06T06:56:00Z"}]