[{"author":[{"first_name":"Yaroslav","last_name":"Frolov","full_name":"Frolov, Yaroslav"},{"last_name":"Haranich","full_name":"Haranich, Yurii","first_name":"Yurii"},{"full_name":"Bobukh, Olexandr","last_name":"Bobukh","first_name":"Olexandr"},{"first_name":"Oleg","full_name":"Remez, Oleg","last_name":"Remez"},{"last_name":"Voswinkel","full_name":"Voswinkel, Dietrich","id":"52634","first_name":"Dietrich"},{"first_name":"Olexandr","id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin"}],"date_created":"2021-09-16T16:21:12Z","volume":58,"date_updated":"2022-01-06T06:56:27Z","doi":"10.1016/j.jmapro.2020.08.049","title":"Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding","publication_status":"published","publication_identifier":{"issn":["1526-6125"]},"citation":{"ama":"Frolov Y, Haranich Y, Bobukh O, Remez O, Voswinkel D, Grydin O. Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding. <i>Journal of Manufacturing Processes</i>. 2020;58:857-867. doi:<a href=\"https://doi.org/10.1016/j.jmapro.2020.08.049\">10.1016/j.jmapro.2020.08.049</a>","chicago":"Frolov, Yaroslav, Yurii Haranich, Olexandr Bobukh, Oleg Remez, Dietrich Voswinkel, and Olexandr Grydin. “Deformation of Expanded Steel Mesh Inlay inside Aluminum Matrix during the Roll Bonding.” <i>Journal of Manufacturing Processes</i> 58 (2020): 857–67. <a href=\"https://doi.org/10.1016/j.jmapro.2020.08.049\">https://doi.org/10.1016/j.jmapro.2020.08.049</a>.","ieee":"Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, and O. Grydin, “Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding,” <i>Journal of Manufacturing Processes</i>, vol. 58, pp. 857–867, 2020, doi: <a href=\"https://doi.org/10.1016/j.jmapro.2020.08.049\">10.1016/j.jmapro.2020.08.049</a>.","bibtex":"@article{Frolov_Haranich_Bobukh_Remez_Voswinkel_Grydin_2020, title={Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding}, volume={58}, DOI={<a href=\"https://doi.org/10.1016/j.jmapro.2020.08.049\">10.1016/j.jmapro.2020.08.049</a>}, journal={Journal of Manufacturing Processes}, author={Frolov, Yaroslav and Haranich, Yurii and Bobukh, Olexandr and Remez, Oleg and Voswinkel, Dietrich and Grydin, Olexandr}, year={2020}, pages={857–867} }","short":"Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, O. Grydin, Journal of Manufacturing Processes 58 (2020) 857–867.","mla":"Frolov, Yaroslav, et al. “Deformation of Expanded Steel Mesh Inlay inside Aluminum Matrix during the Roll Bonding.” <i>Journal of Manufacturing Processes</i>, vol. 58, 2020, pp. 857–67, doi:<a href=\"https://doi.org/10.1016/j.jmapro.2020.08.049\">10.1016/j.jmapro.2020.08.049</a>.","apa":"Frolov, Y., Haranich, Y., Bobukh, O., Remez, O., Voswinkel, D., &#38; Grydin, O. (2020). Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding. <i>Journal of Manufacturing Processes</i>, <i>58</i>, 857–867. <a href=\"https://doi.org/10.1016/j.jmapro.2020.08.049\">https://doi.org/10.1016/j.jmapro.2020.08.049</a>"},"page":"857-867","intvolume":"        58","year":"2020","user_id":"43822","department":[{"_id":"158"}],"_id":"24570","language":[{"iso":"eng"}],"type":"journal_article","publication":"Journal of Manufacturing Processes","status":"public"},{"title":"Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050","date_updated":"2022-01-06T06:56:27Z","volume":23,"date_created":"2021-09-16T16:28:38Z","author":[{"last_name":"Bondarenko","full_name":"Bondarenko, Serhii","first_name":"Serhii"},{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"first_name":"Yaroslav","full_name":"Frolov, Yaroslav","last_name":"Frolov"},{"first_name":"Olga","full_name":"Kuzmina, Olga","last_name":"Kuzmina"},{"first_name":"Olexandr","last_name":"Bobukh","full_name":"Bobukh, Olexandr"}],"year":"2020","intvolume":"        23","page":"91-101","citation":{"apa":"Bondarenko, S., Grydin, O., Frolov, Y., Kuzmina, O., &#38; Bobukh, O. (2020). Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050. <i>Modern Problems of Metallurgy – Scientific Bulletin</i>, <i>23</i>, 91–101.","mla":"Bondarenko, Serhii, et al. “Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050.” <i>Modern Problems of Metallurgy – Scientific Bulletin</i>, vol. 23, 2020, pp. 91–101.","bibtex":"@article{Bondarenko_Grydin_Frolov_Kuzmina_Bobukh_2020, title={Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050}, volume={23}, journal={Modern Problems of Metallurgy – Scientific Bulletin}, author={Bondarenko, Serhii and Grydin, Olexandr and Frolov, Yaroslav and Kuzmina, Olga and Bobukh, Olexandr}, year={2020}, pages={91–101} }","short":"S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, O. Bobukh, Modern Problems of Metallurgy – Scientific Bulletin 23 (2020) 91–101.","chicago":"Bondarenko, Serhii, Olexandr Grydin, Yaroslav Frolov, Olga Kuzmina, and Olexandr Bobukh. “Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050.” <i>Modern Problems of Metallurgy – Scientific Bulletin</i> 23 (2020): 91–101.","ieee":"S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, and O. Bobukh, “Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050,” <i>Modern Problems of Metallurgy – Scientific Bulletin</i>, vol. 23, pp. 91–101, 2020.","ama":"Bondarenko S, Grydin O, Frolov Y, Kuzmina O, Bobukh O. Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050. <i>Modern Problems of Metallurgy – Scientific Bulletin</i>. 2020;23:91-101."},"publication_status":"published","language":[{"iso":"other"}],"_id":"24574","department":[{"_id":"158"}],"user_id":"43822","status":"public","publication":"Modern Problems of Metallurgy – Scientific Bulletin","type":"journal_article"},{"type":"book_chapter","publication":"The Minerals, Metals & Materials Series","status":"public","user_id":"24803","department":[{"_id":"158"},{"_id":"321"}],"_id":"23801","language":[{"iso":"eng"}],"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2367-1181","2367-1696"]},"citation":{"ama":"Reitz A, Grydin O, Schaper M. Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts. In: <i>The Minerals, Metals &#38; Materials Series</i>. Springer; 2020. doi:<a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">10.1007/978-3-030-36628-5_7</a>","ieee":"A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in <i>The Minerals, Metals &#38; Materials Series</i>, Cham: Springer, 2020.","chicago":"Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” In <i>The Minerals, Metals &#38; Materials Series</i>. Cham: Springer, 2020. <a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">https://doi.org/10.1007/978-3-030-36628-5_7</a>.","apa":"Reitz, A., Grydin, O., &#38; Schaper, M. (2020). Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts. In <i>The Minerals, Metals &#38; Materials Series</i>. Springer. <a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">https://doi.org/10.1007/978-3-030-36628-5_7</a>","mla":"Reitz, Alexander, et al. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” <i>The Minerals, Metals &#38; Materials Series</i>, Springer, 2020, doi:<a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">10.1007/978-3-030-36628-5_7</a>.","short":"A. Reitz, O. Grydin, M. Schaper, in: The Minerals, Metals &#38; Materials Series, Springer, Cham, 2020.","bibtex":"@inbook{Reitz_Grydin_Schaper_2020, place={Cham}, title={Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts}, DOI={<a href=\"https://doi.org/10.1007/978-3-030-36628-5_7\">10.1007/978-3-030-36628-5_7</a>}, booktitle={The Minerals, Metals &#38; Materials Series}, publisher={Springer}, author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2020} }"},"place":"Cham","year":"2020","author":[{"orcid":"0000-0001-9047-467X","last_name":"Reitz","id":"24803","full_name":"Reitz, Alexander","first_name":"Alexander"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin"},{"full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper","first_name":"Mirko"}],"date_created":"2021-09-06T13:24:55Z","date_updated":"2022-01-06T06:56:00Z","publisher":"Springer","main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-030-36628-5_7"}],"doi":"10.1007/978-3-030-36628-5_7","title":"Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts"},{"type":"book_chapter","publication":"Light Metals 2020","status":"public","user_id":"14931","department":[{"_id":"158"},{"_id":"630"}],"project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"}],"_id":"24575","language":[{"iso":"eng"}],"publication_status":"published","publication_identifier":{"issn":["2367-1181","2367-1696"]},"citation":{"ama":"Grydin O, Stolbchenko M, Schaper M. Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips. In: <i>Light Metals 2020</i>. ; 2020:1039-1044. doi:<a href=\"https://doi.org/10.1007/978-3-030-36408-3_141\">10.1007/978-3-030-36408-3_141</a>","chicago":"Grydin, Olexandr, Mykhailo Stolbchenko, and Mirko Schaper. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.” In <i>Light Metals 2020</i>, 1039–44. Cham, 2020. <a href=\"https://doi.org/10.1007/978-3-030-36408-3_141\">https://doi.org/10.1007/978-3-030-36408-3_141</a>.","ieee":"O. Grydin, M. Stolbchenko, and M. Schaper, “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips,” in <i>Light Metals 2020</i>, Cham, 2020, pp. 1039–1044.","bibtex":"@inbook{Grydin_Stolbchenko_Schaper_2020, place={Cham}, title={Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips}, DOI={<a href=\"https://doi.org/10.1007/978-3-030-36408-3_141\">10.1007/978-3-030-36408-3_141</a>}, booktitle={Light Metals 2020}, author={Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}, year={2020}, pages={1039–1044} }","short":"O. Grydin, M. Stolbchenko, M. Schaper, in: Light Metals 2020, Cham, 2020, pp. 1039–1044.","mla":"Grydin, Olexandr, et al. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.” <i>Light Metals 2020</i>, 2020, pp. 1039–44, doi:<a href=\"https://doi.org/10.1007/978-3-030-36408-3_141\">10.1007/978-3-030-36408-3_141</a>.","apa":"Grydin, O., Stolbchenko, M., &#38; Schaper, M. (2020). Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips. In <i>Light Metals 2020</i> (pp. 1039–1044). <a href=\"https://doi.org/10.1007/978-3-030-36408-3_141\">https://doi.org/10.1007/978-3-030-36408-3_141</a>"},"page":"1039-1044","place":"Cham","year":"2020","date_created":"2021-09-16T16:29:14Z","author":[{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"full_name":"Stolbchenko, Mykhailo","last_name":"Stolbchenko","first_name":"Mykhailo"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"date_updated":"2023-01-02T11:59:28Z","doi":"10.1007/978-3-030-36408-3_141","title":"Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips"},{"date_updated":"2023-06-01T14:30:12Z","publisher":"Springer","oa":"1","date_created":"2021-09-06T12:55:51Z","author":[{"first_name":"Alexander","full_name":"Reitz, Alexander","id":"24803","last_name":"Reitz","orcid":"0000-0001-9047-467X"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin"},{"first_name":"Mirko","id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper"}],"title":"Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5","doi":"10.1007/s11661-020-05976-x","main_file_link":[{"open_access":"1","url":"https://doi.org/10.1007/s11661-020-05976-x"}],"quality_controlled":"1","publication_identifier":{"issn":["1073-5623","1543-1940"]},"publication_status":"published","year":"2020","page":"5628-5638","citation":{"apa":"Reitz, A., Grydin, O., &#38; Schaper, M. (2020). Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5. <i>Metallurgical and Materials Transactions A</i>, 5628–5638. <a href=\"https://doi.org/10.1007/s11661-020-05976-x\">https://doi.org/10.1007/s11661-020-05976-x</a>","short":"A. Reitz, O. Grydin, M. Schaper, Metallurgical and Materials Transactions A (2020) 5628–5638.","mla":"Reitz, Alexander, et al. “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” <i>Metallurgical and Materials Transactions A</i>, Springer, 2020, pp. 5628–38, doi:<a href=\"https://doi.org/10.1007/s11661-020-05976-x\">10.1007/s11661-020-05976-x</a>.","bibtex":"@article{Reitz_Grydin_Schaper_2020, title={Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5}, DOI={<a href=\"https://doi.org/10.1007/s11661-020-05976-x\">10.1007/s11661-020-05976-x</a>}, journal={Metallurgical and Materials Transactions A}, publisher={Springer}, author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2020}, pages={5628–5638} }","ieee":"A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5,” <i>Metallurgical and Materials Transactions A</i>, pp. 5628–5638, 2020, doi: <a href=\"https://doi.org/10.1007/s11661-020-05976-x\">10.1007/s11661-020-05976-x</a>.","chicago":"Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” <i>Metallurgical and Materials Transactions A</i>, 2020, 5628–38. <a href=\"https://doi.org/10.1007/s11661-020-05976-x\">https://doi.org/10.1007/s11661-020-05976-x</a>.","ama":"Reitz A, Grydin O, Schaper M. Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5. <i>Metallurgical and Materials Transactions A</i>. Published online 2020:5628-5638. doi:<a href=\"https://doi.org/10.1007/s11661-020-05976-x\">10.1007/s11661-020-05976-x</a>"},"_id":"23797","department":[{"_id":"158"},{"_id":"321"}],"user_id":"43720","article_type":"original","language":[{"iso":"eng"}],"publication":"Metallurgical and Materials Transactions A","type":"journal_article","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n<jats:p>Safety-relevant components in automobiles require materials that combine high strength with sufficient residual ductility and high-energy absorption. A graded thermo-mechanical treatment of the press-hardening steel 22MnB5 with graded microstructure can provide a material with such properties. Different austenitization temperatures, cooling and forming conditions within a sheet part lead to the development of microstructures with mixed phase compositions. To determine the resulting phase contents in such graded processed parts, a large number of dilatometric tests are usually required. With a non-contact characterization method, it is possible to detect local phase transformations on an inhomogeneously treated flat steel specimen. For press-hardening steel after heat treatment and thermo-mechanical processing, correlations between austenitization temperature, hot deformation strain, microstructure, and hardness are established.</jats:p>","lang":"eng"}],"status":"public"},{"quality_controlled":"1","issue":"8","year":"2020","date_created":"2021-09-16T16:24:50Z","title":"New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications","publication":"Metals","abstract":[{"lang":"eng","text":"<jats:p>Al-Li based alloys are attractive materials for the aerospace industry. The twin-roll casting of such materials could provide properties not achievable by conventional direct-chill casting and downstream processing methods due to significantly higher solidification rates. An Al-Li-Cu-Mg-Zr alloy was twin-roll cast with the same alloy containing a small addition of Sc. The microstructure of as-cast materials and the influence of Sc on the behavior of the alloy at elevated temperatures were studied by means of light and electron microscopy and by resistivity measurements. A fine-grained structure was formed during twin-roll casting, but several surface and internal defects were found on the strips, which should be suppressed by a further adjustment of the casting conditions. The addition of Sc had a positive effect on grain size uniformity and microstructure stabilization at elevated temperatures, as shown by the precipitation of a fine dispersion of coherent Sc- and Zr-containing precipitates.</jats:p>"}],"language":[{"iso":"eng"}],"publication_status":"published","publication_identifier":{"issn":["2075-4701"]},"citation":{"bibtex":"@article{Grydin_Stolbchenko_Schaper_Belejová_Králík_Bajtošová_Křivská_Hájek_Cieslar_2020, title={New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications}, volume={10}, DOI={<a href=\"https://doi.org/10.3390/met10080987\">10.3390/met10080987</a>}, number={8987}, journal={Metals}, author={Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko and Belejová, Sára and Králík, Rostislav and Bajtošová, Lucia and Křivská, Barbora and Hájek, Michal and Cieslar, Miroslav}, year={2020} }","mla":"Grydin, Olexandr, et al. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” <i>Metals</i>, vol. 10, no. 8, 987, 2020, doi:<a href=\"https://doi.org/10.3390/met10080987\">10.3390/met10080987</a>.","short":"O. Grydin, M. Stolbchenko, M. Schaper, S. Belejová, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, M. Cieslar, Metals 10 (2020).","apa":"Grydin, O., Stolbchenko, M., Schaper, M., Belejová, S., Králík, R., Bajtošová, L., Křivská, B., Hájek, M., &#38; Cieslar, M. (2020). New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications. <i>Metals</i>, <i>10</i>(8), Article 987. <a href=\"https://doi.org/10.3390/met10080987\">https://doi.org/10.3390/met10080987</a>","ama":"Grydin O, Stolbchenko M, Schaper M, et al. New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications. <i>Metals</i>. 2020;10(8). doi:<a href=\"https://doi.org/10.3390/met10080987\">10.3390/met10080987</a>","chicago":"Grydin, Olexandr, Mykhailo Stolbchenko, Mirko Schaper, Sára Belejová, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, and Miroslav Cieslar. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” <i>Metals</i> 10, no. 8 (2020). <a href=\"https://doi.org/10.3390/met10080987\">https://doi.org/10.3390/met10080987</a>.","ieee":"O. Grydin <i>et al.</i>, “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” <i>Metals</i>, vol. 10, no. 8, Art. no. 987, 2020, doi: <a href=\"https://doi.org/10.3390/met10080987\">10.3390/met10080987</a>."},"intvolume":"        10","date_updated":"2023-06-01T14:30:52Z","oa":"1","author":[{"first_name":"Olexandr","last_name":"Grydin","id":"43822","full_name":"Grydin, Olexandr"},{"first_name":"Mykhailo","full_name":"Stolbchenko, Mykhailo","last_name":"Stolbchenko"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"},{"first_name":"Sára","full_name":"Belejová, Sára","last_name":"Belejová"},{"last_name":"Králík","full_name":"Králík, Rostislav","first_name":"Rostislav"},{"full_name":"Bajtošová, Lucia","last_name":"Bajtošová","first_name":"Lucia"},{"first_name":"Barbora","last_name":"Křivská","full_name":"Křivská, Barbora"},{"first_name":"Michal","full_name":"Hájek, Michal","last_name":"Hájek"},{"first_name":"Miroslav","full_name":"Cieslar, Miroslav","last_name":"Cieslar"}],"volume":10,"main_file_link":[{"url":"https://www.mdpi.com/2075-4701/10/8/987/htm","open_access":"1"}],"doi":"10.3390/met10080987","type":"journal_article","status":"public","_id":"24573","user_id":"43720","department":[{"_id":"158"}],"article_number":"987","article_type":"original"},{"title":"Strain parameters at hot rolling of aluminum strips reinforced with steel netting","date_created":"2021-09-16T16:23:44Z","year":"2020","issue":"6","quality_controlled":"1","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"<jats:p> This experiment studied the strain parameters of rolling an aluminum matrix when wire netting is inserted between aluminum layers. During the experiment, two types of stainless steel fabric netting oriented parallel and diagonal to the rolling axis were placed between two aluminum strips and rolled. Multiple rolling processes were performed in which the temperature and pressure on the material were varied to produce bonding of matrix layers. During the study, the following main investigations were made: strain on areas of longitudinal and transverse cross sections of the composite was measured; stretching and ovalization of net wiring and changes in the net cell angles were determined; mechanical properties of composites along the rolling direction were tested. The main contradiction resulting from this experiment was as follows: the contact pressure required for the bonding of aluminum layers produces extreme tensile strain on the inserted net wires, reducing the mechanical properties of the reinforcing net and thus reducing properties of the entire composite. Optimal results in the longitudinal tension tests were achieved by using strips with diagonally oriented net-reinforcement. </jats:p>"}],"publication":"Journal of Sandwich Structures & Materials","doi":"10.1177/1099636218792539","author":[{"last_name":"Stolbchenko","full_name":"Stolbchenko, Mykhailo","first_name":"Mykhailo"},{"first_name":"Hanna","full_name":"Makeieva, Hanna","last_name":"Makeieva"},{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"last_name":"Frolov","full_name":"Frolov, Yaroslav","first_name":"Yaroslav"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"volume":22,"date_updated":"2023-06-01T14:30:38Z","citation":{"ama":"Stolbchenko M, Makeieva H, Grydin O, Frolov Y, Schaper M. Strain parameters at hot rolling of aluminum strips reinforced with steel netting. <i>Journal of Sandwich Structures &#38; Materials</i>. 2020;22(6):2009-2029. doi:<a href=\"https://doi.org/10.1177/1099636218792539\">10.1177/1099636218792539</a>","chicago":"Stolbchenko, Mykhailo, Hanna Makeieva, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” <i>Journal of Sandwich Structures &#38; Materials</i> 22, no. 6 (2020): 2009–29. <a href=\"https://doi.org/10.1177/1099636218792539\">https://doi.org/10.1177/1099636218792539</a>.","ieee":"M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” <i>Journal of Sandwich Structures &#38; Materials</i>, vol. 22, no. 6, pp. 2009–2029, 2020, doi: <a href=\"https://doi.org/10.1177/1099636218792539\">10.1177/1099636218792539</a>.","apa":"Stolbchenko, M., Makeieva, H., Grydin, O., Frolov, Y., &#38; Schaper, M. (2020). Strain parameters at hot rolling of aluminum strips reinforced with steel netting. <i>Journal of Sandwich Structures &#38; Materials</i>, <i>22</i>(6), 2009–2029. <a href=\"https://doi.org/10.1177/1099636218792539\">https://doi.org/10.1177/1099636218792539</a>","bibtex":"@article{Stolbchenko_Makeieva_Grydin_Frolov_Schaper_2020, title={Strain parameters at hot rolling of aluminum strips reinforced with steel netting}, volume={22}, DOI={<a href=\"https://doi.org/10.1177/1099636218792539\">10.1177/1099636218792539</a>}, number={6}, journal={Journal of Sandwich Structures &#38; Materials}, author={Stolbchenko, Mykhailo and Makeieva, Hanna and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2020}, pages={2009–2029} }","short":"M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, M. Schaper, Journal of Sandwich Structures &#38; Materials 22 (2020) 2009–2029.","mla":"Stolbchenko, Mykhailo, et al. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” <i>Journal of Sandwich Structures &#38; Materials</i>, vol. 22, no. 6, 2020, pp. 2009–29, doi:<a href=\"https://doi.org/10.1177/1099636218792539\">10.1177/1099636218792539</a>."},"page":"2009-2029","intvolume":"        22","publication_status":"published","publication_identifier":{"issn":["1099-6362","1530-7972"]},"user_id":"43720","department":[{"_id":"158"}],"_id":"24572","status":"public","type":"journal_article"},{"volume":51,"author":[{"first_name":"Anatolii","last_name":"Andreiev","id":"50215","full_name":"Andreiev, Anatolii"},{"last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin","first_name":"Olexandr"},{"last_name":"Frolov","full_name":"Frolov, Yaroslav","first_name":"Yaroslav"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"date_created":"2023-02-02T14:43:22Z","publisher":"Wiley","date_updated":"2023-06-01T14:29:46Z","doi":"10.1002/mawe.201900191","title":"Degradable silver‐based alloys","issue":"4","quality_controlled":"1","publication_identifier":{"issn":["0933-5137","1521-4052"]},"publication_status":"published","intvolume":"        51","page":"517-530","citation":{"mla":"Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” <i>Materialwissenschaft Und Werkstofftechnik</i>, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:<a href=\"https://doi.org/10.1002/mawe.201900191\">10.1002/mawe.201900191</a>.","short":"A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 517–530.","bibtex":"@article{Andreiev_Hoyer_Grydin_Frolov_Schaper_2020, title={Degradable silver‐based alloys}, volume={51}, DOI={<a href=\"https://doi.org/10.1002/mawe.201900191\">10.1002/mawe.201900191</a>}, number={4}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2020}, pages={517–530} }","apa":"Andreiev, A., Hoyer, K.-P., Grydin, O., Frolov, Y., &#38; Schaper, M. (2020). Degradable silver‐based alloys. <i>Materialwissenschaft Und Werkstofftechnik</i>, <i>51</i>(4), 517–530. <a href=\"https://doi.org/10.1002/mawe.201900191\">https://doi.org/10.1002/mawe.201900191</a>","ama":"Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. <i>Materialwissenschaft und Werkstofftechnik</i>. 2020;51(4):517-530. doi:<a href=\"https://doi.org/10.1002/mawe.201900191\">10.1002/mawe.201900191</a>","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” <i>Materialwissenschaft Und Werkstofftechnik</i> 51, no. 4 (2020): 517–30. <a href=\"https://doi.org/10.1002/mawe.201900191\">https://doi.org/10.1002/mawe.201900191</a>.","ieee":"A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” <i>Materialwissenschaft und Werkstofftechnik</i>, vol. 51, no. 4, pp. 517–530, 2020, doi: <a href=\"https://doi.org/10.1002/mawe.201900191\">10.1002/mawe.201900191</a>."},"year":"2020","department":[{"_id":"9"},{"_id":"158"}],"user_id":"43720","_id":"41522","language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"publication":"Materialwissenschaft und Werkstofftechnik","type":"journal_article","status":"public"},{"status":"public","type":"journal_article","publication":"Mechanics of Advanced Materials and Structures","language":[{"iso":"eng"}],"user_id":"43720","department":[{"_id":"158"}],"_id":"24571","citation":{"ieee":"M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” <i>Mechanics of Advanced Materials and Structures</i>, vol. 27, no. 18, pp. 1599–1608, 2020, doi: <a href=\"https://doi.org/10.1080/15376494.2018.1520941\">10.1080/15376494.2018.1520941</a>.","chicago":"Stolbchenko, Mykhailo, Yaroslav Frolov, Hanna Makeieva, Olexandr Grydin, Michael A. Tershakovec, and Mirko Schaper. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” <i>Mechanics of Advanced Materials and Structures</i> 27, no. 18 (2020): 1599–1608. <a href=\"https://doi.org/10.1080/15376494.2018.1520941\">https://doi.org/10.1080/15376494.2018.1520941</a>.","ama":"Stolbchenko M, Frolov Y, Makeieva H, Grydin O, Tershakovec MA, Schaper M. The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. <i>Mechanics of Advanced Materials and Structures</i>. 2020;27(18):1599-1608. doi:<a href=\"https://doi.org/10.1080/15376494.2018.1520941\">10.1080/15376494.2018.1520941</a>","mla":"Stolbchenko, Mykhailo, et al. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” <i>Mechanics of Advanced Materials and Structures</i>, vol. 27, no. 18, 2020, pp. 1599–608, doi:<a href=\"https://doi.org/10.1080/15376494.2018.1520941\">10.1080/15376494.2018.1520941</a>.","bibtex":"@article{Stolbchenko_Frolov_Makeieva_Grydin_Tershakovec_Schaper_2020, title={The mechanical properties of rolled wire-reinforced aluminum composites at different strain values}, volume={27}, DOI={<a href=\"https://doi.org/10.1080/15376494.2018.1520941\">10.1080/15376494.2018.1520941</a>}, number={18}, journal={Mechanics of Advanced Materials and Structures}, author={Stolbchenko, Mykhailo and Frolov, Yaroslav and Makeieva, Hanna and Grydin, Olexandr and Tershakovec, Michael A. and Schaper, Mirko}, year={2020}, pages={1599–1608} }","short":"M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M.A. Tershakovec, M. Schaper, Mechanics of Advanced Materials and Structures 27 (2020) 1599–1608.","apa":"Stolbchenko, M., Frolov, Y., Makeieva, H., Grydin, O., Tershakovec, M. A., &#38; Schaper, M. (2020). The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. <i>Mechanics of Advanced Materials and Structures</i>, <i>27</i>(18), 1599–1608. <a href=\"https://doi.org/10.1080/15376494.2018.1520941\">https://doi.org/10.1080/15376494.2018.1520941</a>"},"intvolume":"        27","page":"1599-1608","year":"2020","issue":"18","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["1537-6494","1537-6532"]},"doi":"10.1080/15376494.2018.1520941","title":"The mechanical properties of rolled wire-reinforced aluminum composites at different strain values","author":[{"last_name":"Stolbchenko","full_name":"Stolbchenko, Mykhailo","first_name":"Mykhailo"},{"full_name":"Frolov, Yaroslav","last_name":"Frolov","first_name":"Yaroslav"},{"last_name":"Makeieva","full_name":"Makeieva, Hanna","first_name":"Hanna"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"full_name":"Tershakovec, Michael A.","last_name":"Tershakovec","first_name":"Michael A."},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"date_created":"2021-09-16T16:22:31Z","volume":27,"date_updated":"2023-06-01T14:30:26Z"},{"language":[{"iso":"eng"}],"article_number":"2000130","user_id":"43720","department":[{"_id":"158"},{"_id":"321"}],"_id":"23899","status":"public","type":"journal_article","publication":"Advanced Engineering Materials","doi":"10.1002/adem.202000130","title":"Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads","author":[{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"last_name":"Matzelt","full_name":"Matzelt, Manuel","first_name":"Manuel"},{"first_name":"Anatolii","full_name":"Andreiev, Anatolii","id":"50215","last_name":"Andreiev"},{"first_name":"Yaroslav","last_name":"Frolov","full_name":"Frolov, Yaroslav"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"}],"date_created":"2021-09-08T07:29:58Z","date_updated":"2023-06-01T14:32:53Z","citation":{"ieee":"O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, and M. Schaper, “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads,” <i>Advanced Engineering Materials</i>, Art. no. 2000130, 2020, doi: <a href=\"https://doi.org/10.1002/adem.202000130\">10.1002/adem.202000130</a>.","chicago":"Grydin, Olexandr, Manuel Matzelt, Anatolii Andreiev, Yaroslav Frolov, and Mirko Schaper. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” <i>Advanced Engineering Materials</i>, 2020. <a href=\"https://doi.org/10.1002/adem.202000130\">https://doi.org/10.1002/adem.202000130</a>.","ama":"Grydin O, Matzelt M, Andreiev A, Frolov Y, Schaper M. Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads. <i>Advanced Engineering Materials</i>. Published online 2020. doi:<a href=\"https://doi.org/10.1002/adem.202000130\">10.1002/adem.202000130</a>","mla":"Grydin, Olexandr, et al. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” <i>Advanced Engineering Materials</i>, 2000130, 2020, doi:<a href=\"https://doi.org/10.1002/adem.202000130\">10.1002/adem.202000130</a>.","short":"O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, M. Schaper, Advanced Engineering Materials (2020).","bibtex":"@article{Grydin_Matzelt_Andreiev_Frolov_Schaper_2020, title={Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads}, DOI={<a href=\"https://doi.org/10.1002/adem.202000130\">10.1002/adem.202000130</a>}, number={2000130}, journal={Advanced Engineering Materials}, author={Grydin, Olexandr and Matzelt, Manuel and Andreiev, Anatolii and Frolov, Yaroslav and Schaper, Mirko}, year={2020} }","apa":"Grydin, O., Matzelt, M., Andreiev, A., Frolov, Y., &#38; Schaper, M. (2020). Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads. <i>Advanced Engineering Materials</i>, Article 2000130. <a href=\"https://doi.org/10.1002/adem.202000130\">https://doi.org/10.1002/adem.202000130</a>"},"year":"2020","publication_status":"published","publication_identifier":{"issn":["1438-1656","1527-2648"]},"quality_controlled":"1"},{"date_created":"2021-09-08T07:27:30Z","author":[{"first_name":"Anatolii","id":"50215","full_name":"Andreiev, Anatolii","last_name":"Andreiev"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin"},{"first_name":"Yaroslaw","full_name":"Frolov, Yaroslaw","last_name":"Frolov"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"date_updated":"2023-06-01T14:32:35Z","doi":"10.1002/mawe.201900191","title":"Degradable silver‐based alloys","publication_status":"published","publication_identifier":{"issn":["0933-5137","1521-4052"]},"quality_controlled":"1","citation":{"ama":"Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. <i>Materialwissenschaft und Werkstofftechnik</i>. Published online 2020:517-530. doi:<a href=\"https://doi.org/10.1002/mawe.201900191\">10.1002/mawe.201900191</a>","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslaw Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” <i>Materialwissenschaft Und Werkstofftechnik</i>, 2020, 517–30. <a href=\"https://doi.org/10.1002/mawe.201900191\">https://doi.org/10.1002/mawe.201900191</a>.","ieee":"A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” <i>Materialwissenschaft und Werkstofftechnik</i>, pp. 517–530, 2020, doi: <a href=\"https://doi.org/10.1002/mawe.201900191\">10.1002/mawe.201900191</a>.","apa":"Andreiev, A., Hoyer, K.-P., Grydin, O., Frolov, Y., &#38; Schaper, M. (2020). Degradable silver‐based alloys. <i>Materialwissenschaft Und Werkstofftechnik</i>, 517–530. <a href=\"https://doi.org/10.1002/mawe.201900191\">https://doi.org/10.1002/mawe.201900191</a>","short":"A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 517–530.","mla":"Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” <i>Materialwissenschaft Und Werkstofftechnik</i>, 2020, pp. 517–30, doi:<a href=\"https://doi.org/10.1002/mawe.201900191\">10.1002/mawe.201900191</a>.","bibtex":"@article{Andreiev_Hoyer_Grydin_Frolov_Schaper_2020, title={Degradable silver‐based alloys}, DOI={<a href=\"https://doi.org/10.1002/mawe.201900191\">10.1002/mawe.201900191</a>}, journal={Materialwissenschaft und Werkstofftechnik}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Grydin, Olexandr and Frolov, Yaroslaw and Schaper, Mirko}, year={2020}, pages={517–530} }"},"page":"517-530","year":"2020","user_id":"43720","department":[{"_id":"158"},{"_id":"321"}],"_id":"23896","language":[{"iso":"eng"}],"type":"journal_article","publication":"Materialwissenschaft und Werkstofftechnik","status":"public"},{"author":[{"first_name":"Olexandr","id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin"},{"first_name":"Nikolay","last_name":"Sotirov","full_name":"Sotirov, Nikolay"},{"last_name":"Samsonenko","full_name":"Samsonenko, Andrii","first_name":"Andrii"},{"last_name":"Biba","full_name":"Biba, Nikolay","first_name":"Nikolay"},{"first_name":"Anatolii","id":"50215","full_name":"Andreiev, Anatolii","last_name":"Andreiev"},{"first_name":"Mykhailo","last_name":"Stolbchenko","full_name":"Stolbchenko, Mykhailo"},{"first_name":"Teresa","last_name":"Behr","full_name":"Behr, Teresa"},{"last_name":"Frolov","full_name":"Frolov, Iaroslav","first_name":"Iaroslav"},{"first_name":"Mirko","id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper"}],"date_created":"2021-09-08T07:31:34Z","date_updated":"2023-06-01T14:28:28Z","doi":"10.4028/www.scientific.net/msf.949.85","title":"Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082","publication_status":"published","publication_identifier":{"issn":["1662-9752"]},"quality_controlled":"1","citation":{"short":"O. Grydin, N. Sotirov, A. Samsonenko, N. Biba, A. Andreiev, M. Stolbchenko, T. Behr, I. Frolov, M. Schaper, Materials Science Forum (2019) 85–92.","bibtex":"@article{Grydin_Sotirov_Samsonenko_Biba_Andreiev_Stolbchenko_Behr_Frolov_Schaper_2019, title={Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082}, DOI={<a href=\"https://doi.org/10.4028/www.scientific.net/msf.949.85\">10.4028/www.scientific.net/msf.949.85</a>}, journal={Materials Science Forum}, author={Grydin, Olexandr and Sotirov, Nikolay and Samsonenko, Andrii and Biba, Nikolay and Andreiev, Anatolii and Stolbchenko, Mykhailo and Behr, Teresa and Frolov, Iaroslav and Schaper, Mirko}, year={2019}, pages={85–92} }","mla":"Grydin, Olexandr, et al. “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082.” <i>Materials Science Forum</i>, 2019, pp. 85–92, doi:<a href=\"https://doi.org/10.4028/www.scientific.net/msf.949.85\">10.4028/www.scientific.net/msf.949.85</a>.","apa":"Grydin, O., Sotirov, N., Samsonenko, A., Biba, N., Andreiev, A., Stolbchenko, M., Behr, T., Frolov, I., &#38; Schaper, M. (2019). Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082. <i>Materials Science Forum</i>, 85–92. <a href=\"https://doi.org/10.4028/www.scientific.net/msf.949.85\">https://doi.org/10.4028/www.scientific.net/msf.949.85</a>","chicago":"Grydin, Olexandr, Nikolay Sotirov, Andrii Samsonenko, Nikolay Biba, Anatolii Andreiev, Mykhailo Stolbchenko, Teresa Behr, Iaroslav Frolov, and Mirko Schaper. “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082.” <i>Materials Science Forum</i>, 2019, 85–92. <a href=\"https://doi.org/10.4028/www.scientific.net/msf.949.85\">https://doi.org/10.4028/www.scientific.net/msf.949.85</a>.","ieee":"O. Grydin <i>et al.</i>, “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082,” <i>Materials Science Forum</i>, pp. 85–92, 2019, doi: <a href=\"https://doi.org/10.4028/www.scientific.net/msf.949.85\">10.4028/www.scientific.net/msf.949.85</a>.","ama":"Grydin O, Sotirov N, Samsonenko A, et al. Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082. <i>Materials Science Forum</i>. Published online 2019:85-92. doi:<a href=\"https://doi.org/10.4028/www.scientific.net/msf.949.85\">10.4028/www.scientific.net/msf.949.85</a>"},"page":"85-92","year":"2019","user_id":"43720","department":[{"_id":"158"},{"_id":"321"}],"_id":"23907","language":[{"iso":"eng"}],"type":"journal_article","publication":"Materials Science Forum","status":"public","abstract":[{"lang":"eng","text":"<jats:p>One of the strategies employed to lower weight and to decrease material consumption is reducing part thickness itself. Thus, functionally graded materials in which structural reinforcement is adjusted locally, are of great interest. With regard to conventional industrial processes, such as extrusion or flexible cold rolling, thickness variations can only be achieved either longitudinally or through the cross-section of the semi-finished products. Hence, a combined thickness variation (along both axes) is difficult to generate solely by extrusion or rolling. A simultaneous thickness variation in both directions, however, would enable further weight savings in structural components such as car body parts. In this study, a promising approach with extruded shapes, serving as a billet for a flexible hot rolling process, is elaborated upon. By employing the described process modification, shapes with simultaneous thickness variations in longitudinal as well as in transverse direction are feasible. Initial numerical analysis reveals the weight-saving potential of using these semi-finished products for structural parts in a car body. A demonstration of the production process for the semi-finished parts and the occurring challenges are discussed. To verify and adjust the new technology, a numerical model of the flexible hot rolling process has been created based on the finite element software QForm VX. This model is also employed for tool design optimization to produce semi-finished components with the required geometrical quality. Finally, the results of hot rolling experiments conducted using the adjusted roll design are presented.</jats:p>"}]},{"publication":"Materials Science and Engineering: A","type":"journal_article","status":"public","department":[{"_id":"158"},{"_id":"321"}],"user_id":"43720","_id":"23900","language":[{"iso":"eng"}],"publication_identifier":{"issn":["0921-5093"]},"quality_controlled":"1","publication_status":"published","page":"176-195","citation":{"apa":"Grydin, O., Andreiev, A., Holzweißig, M. J., Rüsing, C. J., Duschik, K., Frolov, Y., &#38; Schaper, M. (2019). Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties. <i>Materials Science and Engineering: A</i>, 176–195. <a href=\"https://doi.org/10.1016/j.msea.2019.02.025\">https://doi.org/10.1016/j.msea.2019.02.025</a>","short":"O. Grydin, A. Andreiev, M.J. Holzweißig, C.J. Rüsing, K. Duschik, Y. Frolov, M. Schaper, Materials Science and Engineering: A (2019) 176–195.","mla":"Grydin, Olexandr, et al. “Short Austenitization Treatment with Subsequent Press Hardening: Correlation between Process Parameters, Microstructure and Mechanical Properties.” <i>Materials Science and Engineering: A</i>, 2019, pp. 176–95, doi:<a href=\"https://doi.org/10.1016/j.msea.2019.02.025\">10.1016/j.msea.2019.02.025</a>.","bibtex":"@article{Grydin_Andreiev_Holzweißig_Rüsing_Duschik_Frolov_Schaper_2019, title={Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties}, DOI={<a href=\"https://doi.org/10.1016/j.msea.2019.02.025\">10.1016/j.msea.2019.02.025</a>}, journal={Materials Science and Engineering: A}, author={Grydin, Olexandr and Andreiev, Anatolii and Holzweißig, Martin Joachim and Rüsing, Christian Johannes and Duschik, Kristina and Frolov, Yaroslav and Schaper, Mirko}, year={2019}, pages={176–195} }","chicago":"Grydin, Olexandr, Anatolii Andreiev, Martin Joachim Holzweißig, Christian Johannes Rüsing, Kristina Duschik, Yaroslav Frolov, and Mirko Schaper. “Short Austenitization Treatment with Subsequent Press Hardening: Correlation between Process Parameters, Microstructure and Mechanical Properties.” <i>Materials Science and Engineering: A</i>, 2019, 176–95. <a href=\"https://doi.org/10.1016/j.msea.2019.02.025\">https://doi.org/10.1016/j.msea.2019.02.025</a>.","ieee":"O. Grydin <i>et al.</i>, “Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties,” <i>Materials Science and Engineering: A</i>, pp. 176–195, 2019, doi: <a href=\"https://doi.org/10.1016/j.msea.2019.02.025\">10.1016/j.msea.2019.02.025</a>.","ama":"Grydin O, Andreiev A, Holzweißig MJ, et al. Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties. <i>Materials Science and Engineering: A</i>. Published online 2019:176-195. doi:<a href=\"https://doi.org/10.1016/j.msea.2019.02.025\">10.1016/j.msea.2019.02.025</a>"},"year":"2019","author":[{"last_name":"Grydin","id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr"},{"id":"50215","full_name":"Andreiev, Anatolii","last_name":"Andreiev","first_name":"Anatolii"},{"first_name":"Martin Joachim","full_name":"Holzweißig, Martin Joachim","last_name":"Holzweißig"},{"last_name":"Rüsing","full_name":"Rüsing, Christian Johannes","first_name":"Christian Johannes"},{"last_name":"Duschik","full_name":"Duschik, Kristina","first_name":"Kristina"},{"last_name":"Frolov","full_name":"Frolov, Yaroslav","first_name":"Yaroslav"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"date_created":"2021-09-08T07:30:13Z","date_updated":"2023-06-01T14:28:06Z","doi":"10.1016/j.msea.2019.02.025","title":"Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties"},{"user_id":"43720","department":[{"_id":"158"},{"_id":"321"}],"_id":"23901","language":[{"iso":"eng"}],"article_number":"1900134","type":"journal_article","publication":"Advanced Engineering Materials","status":"public","author":[{"id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin","first_name":"Olexandr"},{"first_name":"Anatolii","full_name":"Andreiev, Anatolii","id":"50215","last_name":"Andreiev"},{"first_name":"Mergim","last_name":"Zogaj","full_name":"Zogaj, Mergim"},{"first_name":"Yaroslav","last_name":"Frolov","full_name":"Frolov, Yaroslav"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"date_created":"2021-09-08T07:30:23Z","date_updated":"2023-06-01T14:28:17Z","doi":"10.1002/adem.201900134","title":"Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["1438-1656","1527-2648"]},"citation":{"chicago":"Grydin, Olexandr, Anatolii Andreiev, Mergim Zogaj, Yaroslav Frolov, and Mirko Schaper. “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel.” <i>Advanced Engineering Materials</i>, 2019. <a href=\"https://doi.org/10.1002/adem.201900134\">https://doi.org/10.1002/adem.201900134</a>.","ieee":"O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, and M. Schaper, “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel,” <i>Advanced Engineering Materials</i>, Art. no. 1900134, 2019, doi: <a href=\"https://doi.org/10.1002/adem.201900134\">10.1002/adem.201900134</a>.","ama":"Grydin O, Andreiev A, Zogaj M, Frolov Y, Schaper M. Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel. <i>Advanced Engineering Materials</i>. Published online 2019. doi:<a href=\"https://doi.org/10.1002/adem.201900134\">10.1002/adem.201900134</a>","apa":"Grydin, O., Andreiev, A., Zogaj, M., Frolov, Y., &#38; Schaper, M. (2019). Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel. <i>Advanced Engineering Materials</i>, Article 1900134. <a href=\"https://doi.org/10.1002/adem.201900134\">https://doi.org/10.1002/adem.201900134</a>","short":"O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, M. Schaper, Advanced Engineering Materials (2019).","bibtex":"@article{Grydin_Andreiev_Zogaj_Frolov_Schaper_2019, title={Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel}, DOI={<a href=\"https://doi.org/10.1002/adem.201900134\">10.1002/adem.201900134</a>}, number={1900134}, journal={Advanced Engineering Materials}, author={Grydin, Olexandr and Andreiev, Anatolii and Zogaj, Mergim and Frolov, Yaroslav and Schaper, Mirko}, year={2019} }","mla":"Grydin, Olexandr, et al. “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel.” <i>Advanced Engineering Materials</i>, 1900134, 2019, doi:<a href=\"https://doi.org/10.1002/adem.201900134\">10.1002/adem.201900134</a>."},"year":"2019"},{"publication":"JOM","type":"journal_article","status":"public","department":[{"_id":"158"},{"_id":"321"}],"user_id":"43720","_id":"23902","language":[{"iso":"eng"}],"quality_controlled":"1","publication_identifier":{"issn":["1047-4838","1543-1851"]},"publication_status":"published","page":"407-418","citation":{"mla":"Grydin, Olexandr, et al. “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082.” <i>JOM</i>, 2018, pp. 407–18, doi:<a href=\"https://doi.org/10.1007/s11837-018-3144-1\">10.1007/s11837-018-3144-1</a>.","bibtex":"@article{Grydin_Andreiev_Sotirov_Stolbchenko_Behr_Ashkelianets_Frolov_Schaper_2018, title={Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082}, DOI={<a href=\"https://doi.org/10.1007/s11837-018-3144-1\">10.1007/s11837-018-3144-1</a>}, journal={JOM}, author={Grydin, Olexandr and Andreiev, Anatolii and Sotirov, Nikolay and Stolbchenko, Mykhailo and Behr, Teresa M. and Ashkelianets, Anton and Frolov, Iaroslav and Schaper, Mirko}, year={2018}, pages={407–418} }","short":"O. Grydin, A. Andreiev, N. Sotirov, M. Stolbchenko, T.M. Behr, A. Ashkelianets, I. Frolov, M. Schaper, JOM (2018) 407–418.","apa":"Grydin, O., Andreiev, A., Sotirov, N., Stolbchenko, M., Behr, T. M., Ashkelianets, A., Frolov, I., &#38; Schaper, M. (2018). Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082. <i>JOM</i>, 407–418. <a href=\"https://doi.org/10.1007/s11837-018-3144-1\">https://doi.org/10.1007/s11837-018-3144-1</a>","ama":"Grydin O, Andreiev A, Sotirov N, et al. Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082. <i>JOM</i>. Published online 2018:407-418. doi:<a href=\"https://doi.org/10.1007/s11837-018-3144-1\">10.1007/s11837-018-3144-1</a>","ieee":"O. Grydin <i>et al.</i>, “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082,” <i>JOM</i>, pp. 407–418, 2018, doi: <a href=\"https://doi.org/10.1007/s11837-018-3144-1\">10.1007/s11837-018-3144-1</a>.","chicago":"Grydin, Olexandr, Anatolii Andreiev, Nikolay Sotirov, Mykhailo Stolbchenko, Teresa M. Behr, Anton Ashkelianets, Iaroslav Frolov, and Mirko Schaper. “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082.” <i>JOM</i>, 2018, 407–18. <a href=\"https://doi.org/10.1007/s11837-018-3144-1\">https://doi.org/10.1007/s11837-018-3144-1</a>."},"year":"2018","author":[{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"last_name":"Andreiev","id":"50215","full_name":"Andreiev, Anatolii","first_name":"Anatolii"},{"last_name":"Sotirov","full_name":"Sotirov, Nikolay","first_name":"Nikolay"},{"last_name":"Stolbchenko","full_name":"Stolbchenko, Mykhailo","first_name":"Mykhailo"},{"full_name":"Behr, Teresa M.","last_name":"Behr","first_name":"Teresa M."},{"first_name":"Anton","full_name":"Ashkelianets, Anton","last_name":"Ashkelianets"},{"full_name":"Frolov, Iaroslav","last_name":"Frolov","first_name":"Iaroslav"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"date_created":"2021-09-08T07:30:33Z","date_updated":"2023-06-01T14:26:53Z","doi":"10.1007/s11837-018-3144-1","title":"Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082"},{"year":"2017","citation":{"ama":"Grydin O, Andreiev A, Briukhanov A, Briukhanova Z, Schaper M. Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling. <i>steel research international</i>. 2017. doi:<a href=\"https://doi.org/10.1002/srin.201600397\">10.1002/srin.201600397</a>","chicago":"Grydin, Olexandr, Anatolii Andreiev, Arkadii Briukhanov, Zoia Briukhanova, and Mirko Schaper. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” <i>Steel Research International</i>, 2017. <a href=\"https://doi.org/10.1002/srin.201600397\">https://doi.org/10.1002/srin.201600397</a>.","ieee":"O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, and M. Schaper, “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling,” <i>steel research international</i>, 2017.","apa":"Grydin, O., Andreiev, A., Briukhanov, A., Briukhanova, Z., &#38; Schaper, M. (2017). Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling. <i>Steel Research International</i>. <a href=\"https://doi.org/10.1002/srin.201600397\">https://doi.org/10.1002/srin.201600397</a>","mla":"Grydin, Olexandr, et al. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” <i>Steel Research International</i>, 1600397, 2017, doi:<a href=\"https://doi.org/10.1002/srin.201600397\">10.1002/srin.201600397</a>.","short":"O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, M. Schaper, Steel Research International (2017).","bibtex":"@article{Grydin_Andreiev_Briukhanov_Briukhanova_Schaper_2017, title={Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling}, DOI={<a href=\"https://doi.org/10.1002/srin.201600397\">10.1002/srin.201600397</a>}, number={1600397}, journal={steel research international}, author={Grydin, Olexandr and Andreiev, Anatolii and Briukhanov, Arkadii and Briukhanova, Zoia and Schaper, Mirko}, year={2017} }"},"publication_status":"published","publication_identifier":{"issn":["1611-3683"]},"title":"Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling","doi":"10.1002/srin.201600397","date_updated":"2022-01-06T06:56:04Z","author":[{"last_name":"Grydin","id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr"},{"first_name":"Anatolii","last_name":"Andreiev","id":"50215","full_name":"Andreiev, Anatolii"},{"first_name":"Arkadii","full_name":"Briukhanov, Arkadii","last_name":"Briukhanov"},{"first_name":"Zoia","full_name":"Briukhanova, Zoia","last_name":"Briukhanova"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"date_created":"2021-09-08T07:30:56Z","status":"public","type":"journal_article","publication":"steel research international","article_number":"1600397","language":[{"iso":"eng"}],"_id":"23904","user_id":"50215","department":[{"_id":"158"},{"_id":"321"}]},{"year":"2017","place":"Cham","citation":{"short":"A. Andreiev, O. Grydin, M. Schaper, in: Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.","bibtex":"@inbook{Andreiev_Grydin_Schaper_2017, place={Cham}, title={A Rapid Heating Method for Press Hardening Processing}, DOI={<a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">10.1007/978-3-319-52132-9_72</a>}, booktitle={Proceedings of the 3rd Pan American Materials Congress}, author={Andreiev, Anatolii and Grydin, Olexandr and Schaper, Mirko}, year={2017} }","mla":"Andreiev, Anatolii, et al. “A Rapid Heating Method for Press Hardening Processing.” <i>Proceedings of the 3rd Pan American Materials Congress</i>, 2017, doi:<a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">10.1007/978-3-319-52132-9_72</a>.","apa":"Andreiev, A., Grydin, O., &#38; Schaper, M. (2017). A Rapid Heating Method for Press Hardening Processing. In <i>Proceedings of the 3rd Pan American Materials Congress</i>. Cham. <a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">https://doi.org/10.1007/978-3-319-52132-9_72</a>","ama":"Andreiev A, Grydin O, Schaper M. A Rapid Heating Method for Press Hardening Processing. In: <i>Proceedings of the 3rd Pan American Materials Congress</i>. Cham; 2017. doi:<a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">10.1007/978-3-319-52132-9_72</a>","chicago":"Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “A Rapid Heating Method for Press Hardening Processing.” In <i>Proceedings of the 3rd Pan American Materials Congress</i>. Cham, 2017. <a href=\"https://doi.org/10.1007/978-3-319-52132-9_72\">https://doi.org/10.1007/978-3-319-52132-9_72</a>.","ieee":"A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press Hardening Processing,” in <i>Proceedings of the 3rd Pan American Materials Congress</i>, Cham, 2017."},"publication_status":"published","publication_identifier":{"issn":["2367-1181","2367-1696"]},"title":"A Rapid Heating Method for Press Hardening Processing","doi":"10.1007/978-3-319-52132-9_72","date_updated":"2022-01-06T06:56:04Z","author":[{"id":"50215","full_name":"Andreiev, Anatolii","last_name":"Andreiev","first_name":"Anatolii"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"date_created":"2021-09-08T07:32:09Z","status":"public","type":"book_chapter","publication":"Proceedings of the 3rd Pan American Materials Congress","language":[{"iso":"eng"}],"_id":"23910","user_id":"50215","department":[{"_id":"158"},{"_id":"321"}]},{"date_created":"2021-09-10T07:20:48Z","author":[{"last_name":"Reschetnik","full_name":"Reschetnik, Wadim","first_name":"Wadim"},{"first_name":"Jan-Peter","full_name":"Brüggemann, Jan-Peter","last_name":"Brüggemann"},{"last_name":"Aydinöz","full_name":"Aydinöz, Mehmet Esat","first_name":"Mehmet Esat"},{"first_name":"Olexandr","last_name":"Grydin","id":"43822","full_name":"Grydin, Olexandr"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"id":"291","full_name":"Kullmer, Gunter","last_name":"Kullmer","first_name":"Gunter"},{"first_name":"Hans Albert","full_name":"Richard, Hans Albert","last_name":"Richard"}],"date_updated":"2022-01-06T06:56:07Z","doi":"10.1016/j.prostr.2016.06.380","title":"Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy","publication_identifier":{"issn":["2452-3216"]},"publication_status":"published","page":"3040-3048","citation":{"chicago":"Reschetnik, Wadim, Jan-Peter Brüggemann, Mehmet Esat Aydinöz, Olexandr Grydin, Kay-Peter Hoyer, Gunter Kullmer, and Hans Albert Richard. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” <i>Procedia Structural Integrity</i>, 2016, 3040–48. <a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">https://doi.org/10.1016/j.prostr.2016.06.380</a>.","ieee":"W. Reschetnik <i>et al.</i>, “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” <i>Procedia Structural Integrity</i>, pp. 3040–3048, 2016, doi: <a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">10.1016/j.prostr.2016.06.380</a>.","ama":"Reschetnik W, Brüggemann J-P, Aydinöz ME, et al. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. <i>Procedia Structural Integrity</i>. Published online 2016:3040-3048. doi:<a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">10.1016/j.prostr.2016.06.380</a>","apa":"Reschetnik, W., Brüggemann, J.-P., Aydinöz, M. E., Grydin, O., Hoyer, K.-P., Kullmer, G., &#38; Richard, H. A. (2016). Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. <i>Procedia Structural Integrity</i>, 3040–3048. <a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">https://doi.org/10.1016/j.prostr.2016.06.380</a>","bibtex":"@article{Reschetnik_Brüggemann_Aydinöz_Grydin_Hoyer_Kullmer_Richard_2016, title={Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy}, DOI={<a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">10.1016/j.prostr.2016.06.380</a>}, journal={Procedia Structural Integrity}, author={Reschetnik, Wadim and Brüggemann, Jan-Peter and Aydinöz, Mehmet Esat and Grydin, Olexandr and Hoyer, Kay-Peter and Kullmer, Gunter and Richard, Hans Albert}, year={2016}, pages={3040–3048} }","short":"W. Reschetnik, J.-P. Brüggemann, M.E. Aydinöz, O. Grydin, K.-P. Hoyer, G. Kullmer, H.A. Richard, Procedia Structural Integrity (2016) 3040–3048.","mla":"Reschetnik, Wadim, et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” <i>Procedia Structural Integrity</i>, 2016, pp. 3040–48, doi:<a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">10.1016/j.prostr.2016.06.380</a>."},"year":"2016","department":[{"_id":"9"},{"_id":"158"},{"_id":"143"}],"user_id":"48411","_id":"24111","language":[{"iso":"eng"}],"publication":"Procedia Structural Integrity","type":"journal_article","status":"public"},{"status":"public","type":"journal_article","publication":"Procedia Structural Integrity","language":[{"iso":"eng"}],"keyword":["General Engineering","Energy Engineering and Power Technology"],"user_id":"48411","department":[{"_id":"9"},{"_id":"158"}],"_id":"41533","citation":{"ama":"Reschetnik W, Brüggemann J-P, Aydinöz ME, et al. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. <i>Procedia Structural Integrity</i>. 2016;2:3040-3048. doi:<a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">10.1016/j.prostr.2016.06.380</a>","chicago":"Reschetnik, Wadim, Jan-Peter Brüggemann, Mehmet Esat Aydinöz, Olexandr Grydin, Kay-Peter Hoyer, Gunter Kullmer, and Hans-Albert Richard. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” <i>Procedia Structural Integrity</i> 2 (2016): 3040–48. <a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">https://doi.org/10.1016/j.prostr.2016.06.380</a>.","ieee":"W. Reschetnik <i>et al.</i>, “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” <i>Procedia Structural Integrity</i>, vol. 2, pp. 3040–3048, 2016, doi: <a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">10.1016/j.prostr.2016.06.380</a>.","apa":"Reschetnik, W., Brüggemann, J.-P., Aydinöz, M. E., Grydin, O., Hoyer, K.-P., Kullmer, G., &#38; Richard, H.-A. (2016). Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. <i>Procedia Structural Integrity</i>, <i>2</i>, 3040–3048. <a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">https://doi.org/10.1016/j.prostr.2016.06.380</a>","bibtex":"@article{Reschetnik_Brüggemann_Aydinöz_Grydin_Hoyer_Kullmer_Richard_2016, title={Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy}, volume={2}, DOI={<a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">10.1016/j.prostr.2016.06.380</a>}, journal={Procedia Structural Integrity}, publisher={Elsevier BV}, author={Reschetnik, Wadim and Brüggemann, Jan-Peter and Aydinöz, Mehmet Esat and Grydin, Olexandr and Hoyer, Kay-Peter and Kullmer, Gunter and Richard, Hans-Albert}, year={2016}, pages={3040–3048} }","mla":"Reschetnik, Wadim, et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” <i>Procedia Structural Integrity</i>, vol. 2, Elsevier BV, 2016, pp. 3040–48, doi:<a href=\"https://doi.org/10.1016/j.prostr.2016.06.380\">10.1016/j.prostr.2016.06.380</a>.","short":"W. Reschetnik, J.-P. Brüggemann, M.E. Aydinöz, O. Grydin, K.-P. Hoyer, G. Kullmer, H.-A. Richard, Procedia Structural Integrity 2 (2016) 3040–3048."},"intvolume":"         2","page":"3040-3048","year":"2016","publication_status":"published","publication_identifier":{"issn":["2452-3216"]},"doi":"10.1016/j.prostr.2016.06.380","title":"Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy","date_created":"2023-02-02T14:49:52Z","author":[{"first_name":"Wadim","last_name":"Reschetnik","full_name":"Reschetnik, Wadim"},{"first_name":"Jan-Peter","full_name":"Brüggemann, Jan-Peter","last_name":"Brüggemann"},{"first_name":"Mehmet Esat","full_name":"Aydinöz, Mehmet Esat","last_name":"Aydinöz"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Gunter","id":"291","full_name":"Kullmer, Gunter","last_name":"Kullmer"},{"full_name":"Richard, Hans-Albert","last_name":"Richard","first_name":"Hans-Albert"}],"volume":2,"date_updated":"2023-04-27T16:50:06Z","publisher":"Elsevier BV"},{"page":"1733-1741","citation":{"apa":"Andreiev, A., Grydin, O., &#38; Schaper, M. (2016). Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching. <i>Steel Research International</i>, 1733–1741. <a href=\"https://doi.org/10.1002/srin.201600086\">https://doi.org/10.1002/srin.201600086</a>","mla":"Andreiev, Anatolii, et al. “Evolution of Microstructure and Properties of Steel 22MnB5 Due to Short Austenitization with Subsequent Quenching.” <i>Steel Research International</i>, 2016, pp. 1733–41, doi:<a href=\"https://doi.org/10.1002/srin.201600086\">10.1002/srin.201600086</a>.","bibtex":"@article{Andreiev_Grydin_Schaper_2016, title={Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching}, DOI={<a href=\"https://doi.org/10.1002/srin.201600086\">10.1002/srin.201600086</a>}, journal={steel research international}, author={Andreiev, Anatolii and Grydin, Olexandr and Schaper, Mirko}, year={2016}, pages={1733–1741} }","short":"A. Andreiev, O. Grydin, M. Schaper, Steel Research International (2016) 1733–1741.","ama":"Andreiev A, Grydin O, Schaper M. Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching. <i>steel research international</i>. Published online 2016:1733-1741. doi:<a href=\"https://doi.org/10.1002/srin.201600086\">10.1002/srin.201600086</a>","ieee":"A. Andreiev, O. Grydin, and M. Schaper, “Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching,” <i>steel research international</i>, pp. 1733–1741, 2016, doi: <a href=\"https://doi.org/10.1002/srin.201600086\">10.1002/srin.201600086</a>.","chicago":"Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “Evolution of Microstructure and Properties of Steel 22MnB5 Due to Short Austenitization with Subsequent Quenching.” <i>Steel Research International</i>, 2016, 1733–41. <a href=\"https://doi.org/10.1002/srin.201600086\">https://doi.org/10.1002/srin.201600086</a>."},"year":"2016","publication_identifier":{"issn":["1611-3683"]},"quality_controlled":"1","publication_status":"published","doi":"10.1002/srin.201600086","title":"Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching","date_created":"2021-09-08T07:31:05Z","author":[{"first_name":"Anatolii","full_name":"Andreiev, Anatolii","id":"50215","last_name":"Andreiev"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"}],"date_updated":"2023-06-01T14:25:10Z","status":"public","publication":"steel research international","type":"journal_article","language":[{"iso":"eng"}],"department":[{"_id":"158"},{"_id":"321"}],"user_id":"43720","_id":"23905"}]