---
_id: '41492'
abstract:
- lang: eng
text: The current investigation shows the feasibility of 316L steel powder
production via three different argon gas atomisation routes (closed coupled atomisation,
free fall atomisation with and without hot gas), along with subsequent sample
production by laser powder bed fusion (PBF-LB). Here, a mixture of pure Fe and
atomised 316L steel powder is used for PBF-LB to induce a chemical composition
gradient in the microstructure. Optical microscopy and μ-CT investigations proved
that the samples processed by PBF-LB exhibit very little porosity. Combined EBSD-EDS
measurements show the chemical composition gradient leading to the formation of
a local fcc-structure. Upon heat treatment (1100 °C, 14 h), the chemical composition
is homogeneous throughout the microstructure. A moderate decrease (1060 to 985
MPa) in the sample’s ultimate tensile strength (UTS) is observed after heat treatment.
However, the total elongation of the as-built and heat-treated samples remains
the same (≈22%). Similarly, a slight decrease in the hardness from 341 to 307
HV1 is observed upon heat treatment.
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Alexander
full_name: Kircheis, Alexander
last_name: Kircheis
- first_name: Weiyu
full_name: Zhao, Weiyu
last_name: Zhao
- first_name: Jörg
full_name: Fischer-Bühner, Jörg
last_name: Fischer-Bühner
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Pramanik S, Andreiev A, Hoyer K-P, et al. Powder Production via Atomisation
and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.
Powders. 2023;2(1):59-74. doi:10.3390/powders2010005
apa: Pramanik, S., Andreiev, A., Hoyer, K.-P., Krüger, J. T., Hengsbach, F., Kircheis,
A., Zhao, W., Fischer-Bühner, J., & Schaper, M. (2023). Powder Production
via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel
Hybrid Alloy. Powders, 2(1), 59–74. https://doi.org/10.3390/powders2010005
bibtex: '@article{Pramanik_Andreiev_Hoyer_Krüger_Hengsbach_Kircheis_Zhao_Fischer-Bühner_Schaper_2023,
title={Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion
Processing of Fe+316L Steel Hybrid Alloy}, volume={2}, DOI={10.3390/powders2010005},
number={1}, journal={Powders}, publisher={MDPI AG}, author={Pramanik, Sudipta
and Andreiev, Anatolii and Hoyer, Kay-Peter and Krüger, Jan Tobias and Hengsbach,
Florian and Kircheis, Alexander and Zhao, Weiyu and Fischer-Bühner, Jörg and Schaper,
Mirko}, year={2023}, pages={59–74} }'
chicago: 'Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, Jan Tobias Krüger,
Florian Hengsbach, Alexander Kircheis, Weiyu Zhao, Jörg Fischer-Bühner, and Mirko
Schaper. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion
Processing of Fe+316L Steel Hybrid Alloy.” Powders 2, no. 1 (2023): 59–74.
https://doi.org/10.3390/powders2010005.'
ieee: 'S. Pramanik et al., “Powder Production via Atomisation and Subsequent
Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy,” Powders,
vol. 2, no. 1, pp. 59–74, 2023, doi: 10.3390/powders2010005.'
mla: Pramanik, Sudipta, et al. “Powder Production via Atomisation and Subsequent
Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders,
vol. 2, no. 1, MDPI AG, 2023, pp. 59–74, doi:10.3390/powders2010005.
short: S. Pramanik, A. Andreiev, K.-P. Hoyer, J.T. Krüger, F. Hengsbach, A. Kircheis,
W. Zhao, J. Fischer-Bühner, M. Schaper, Powders 2 (2023) 59–74.
date_created: 2023-02-02T14:24:33Z
date_updated: 2023-06-01T14:22:00Z
department:
- _id: '9'
- _id: '158'
doi: 10.3390/powders2010005
intvolume: ' 2'
issue: '1'
language:
- iso: eng
page: 59-74
publication: Powders
publication_identifier:
issn:
- 2674-0516
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing
of Fe+316L Steel Hybrid Alloy
type: journal_article
user_id: '43720'
volume: 2
year: '2023'
...
---
_id: '47122'
abstract:
- lang: eng
text: "AbstractFeCo alloys are important materials
used in pumps and motors in the offshore oil and gas drilling industry. These
alloys are subjected to marine environments with a high NaCl concentration, therefore,
corrosion and catastrophic failure are anticipated. So, the surface dissolution
of additively manufactured FeCo samples is investigated in a quasi-in
situ manner, in particular, the pitting corrosion in 5.0 wt pct
NaCl solution. The local dissolution of the same sample region is monitored after
24, 72, and 168 hours. Here, the formation of rectangular and circular pits of
ultra-fine dimensions (less than 0.5 µm) is observed
with increasing immersion time. In addition, the formation of a corrosion-inhibiting
surface layer is detected on the sample surface. Surface dissolution leads to
a change in the surface structure, however, no change in grain shape or grain
size is noticed. The surface topography after local dissolution is correlated
to the grain orientation. Quasi-in situ analysis shows
the preferential dissolution of high-angle grain boundaries (HAGBs) leading to
a change in the fraction of HAGBs and low-angle grain boundaries fraction (LAGBs).
For the FeCo sample, a potentiodynamic polarisation test reveals a corrosion potential
(Ecorr) of − 0.475 V referred to the standard hydrogen electrode
(SHE) and a corrosion exchange current density (icorr) of
0.0848 A/m2. Furthermore, quasi-in situ
experiments showed that grains oriented along certain crystallographic directions
are corroding more compared to other grains leading to a significant decrease
in the local surface height. Grains with a plane normal close to the $$\\langle
{1}00\\rangle$$\r\n
\ \r\n ⟨\r\n 100\r\n
\ ⟩\r\n \r\n
direction reveal lower surface dissolution and higher corrosion resistance, whereas
planes normal close to the $$\\langle
{11}0\\rangle$$\r\n
\ \r\n ⟨\r\n 110\r\n
\ ⟩\r\n \r\n
direction and the $$\\langle
{111}\\rangle$$\r\n
\ \r\n ⟨\r\n 111\r\n
\ ⟩\r\n \r\n
direction exhibit a higher surface dissolution."
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
citation:
ama: Pramanik S, Krüger JT, Schaper M, Hoyer K-P. Quasi-In Situ Localized Corrosion
of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution. Metallurgical
and Materials Transactions A. Published online 2023. doi:10.1007/s11661-023-07186-7
apa: Pramanik, S., Krüger, J. T., Schaper, M., & Hoyer, K.-P. (2023). Quasi-In
Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct
NaCl Solution. Metallurgical and Materials Transactions A. https://doi.org/10.1007/s11661-023-07186-7
bibtex: '@article{Pramanik_Krüger_Schaper_Hoyer_2023, title={Quasi-In Situ Localized
Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution},
DOI={10.1007/s11661-023-07186-7},
journal={Metallurgical and Materials Transactions A}, publisher={Springer Science
and Business Media LLC}, author={Pramanik, Sudipta and Krüger, Jan Tobias and
Schaper, Mirko and Hoyer, Kay-Peter}, year={2023} }'
chicago: Pramanik, Sudipta, Jan Tobias Krüger, Mirko Schaper, and Kay-Peter Hoyer.
“Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in
5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, 2023.
https://doi.org/10.1007/s11661-023-07186-7.
ieee: 'S. Pramanik, J. T. Krüger, M. Schaper, and K.-P. Hoyer, “Quasi-In Situ Localized
Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution,”
Metallurgical and Materials Transactions A, 2023, doi: 10.1007/s11661-023-07186-7.'
mla: Pramanik, Sudipta, et al. “Quasi-In Situ Localized Corrosion of an Additively
Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials
Transactions A, Springer Science and Business Media LLC, 2023, doi:10.1007/s11661-023-07186-7.
short: S. Pramanik, J.T. Krüger, M. Schaper, K.-P. Hoyer, Metallurgical and Materials
Transactions A (2023).
date_created: 2023-09-18T11:43:28Z
date_updated: 2023-09-18T11:44:04Z
department:
- _id: '9'
- _id: '158'
doi: 10.1007/s11661-023-07186-7
keyword:
- Metals and Alloys
- Mechanics of Materials
- Condensed Matter Physics
language:
- iso: eng
publication: Metallurgical and Materials Transactions A
publication_identifier:
issn:
- 1073-5623
- 1543-1940
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy
in 5 Wt Pct NaCl Solution
type: journal_article
user_id: '48411'
year: '2023'
...
---
_id: '33497'
article_number: '1146'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
citation:
ama: Krüger JT. Adjustment of AgCaLa Phases in a FeMn Matrix via LBM for Implants
with Adapted Degradation. crystals. 2022;12. doi:https://doi.org/10.3390/cryst12081146
apa: Krüger, J. T. (2022). Adjustment of AgCaLa Phases in a FeMn Matrix via LBM
for Implants with Adapted Degradation. Crystals, 12, Article 1146.
https://doi.org/10.3390/cryst12081146
bibtex: '@article{Krüger_2022, title={Adjustment of AgCaLa Phases in a FeMn Matrix
via LBM for Implants with Adapted Degradation}, volume={12}, DOI={https://doi.org/10.3390/cryst12081146},
number={1146}, journal={crystals}, author={Krüger, Jan Tobias}, year={2022} }'
chicago: Krüger, Jan Tobias. “Adjustment of AgCaLa Phases in a FeMn Matrix via LBM
for Implants with Adapted Degradation.” Crystals 12 (2022). https://doi.org/10.3390/cryst12081146.
ieee: 'J. T. Krüger, “Adjustment of AgCaLa Phases in a FeMn Matrix via LBM for Implants
with Adapted Degradation,” crystals, vol. 12, Art. no. 1146, 2022, doi:
https://doi.org/10.3390/cryst12081146.'
mla: Krüger, Jan Tobias. “Adjustment of AgCaLa Phases in a FeMn Matrix via LBM for
Implants with Adapted Degradation.” Crystals, vol. 12, 1146, 2022, doi:https://doi.org/10.3390/cryst12081146.
short: J.T. Krüger, Crystals 12 (2022).
date_created: 2022-09-29T08:35:03Z
date_updated: 2022-09-29T08:36:17Z
department:
- _id: '9'
- _id: '158'
doi: https://doi.org/10.3390/cryst12081146
intvolume: ' 12'
language:
- iso: eng
publication: crystals
status: public
title: Adjustment of AgCaLa Phases in a FeMn Matrix via LBM for Implants with Adapted
Degradation
type: journal_article
user_id: '44307'
volume: 12
year: '2022'
...
---
_id: '36332'
abstract:
- lang: eng
text: AlSi casting alloys combine excellent castability with high strength. Hence,
this group of alloys is often used in the automotive sector. The challenge for
this application is the brittle character of these alloys which leads to cracks
during joint formation when mechanical joining technologies are used. A rise in
ductility can be achieved by a considerable increase in the solidification rate
which results in grain refinement. High solidification rates can be realized in
twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9
(for European Norm - aluminum cast product) is manufactured by the TRC process
and analyzed. Subsequently, joining investigations are performed on castings in
as-cast and heat-treated condition using the self-piercing riveting process considering
the joint formation and the load-bearing capacity. Due to the fine microstructure,
the crack initiation can be avoided during joining, while maintaining the joining
parameters, especially by specimens in heat treatment conditions. Furthermore,
due to the extremely fine microstructure, the load-bearing capacity of the joint
can be significantly increased in terms of the maximum load-bearing force and
the energy absorbed.
article_number: '2200874'
article_type: original
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: Jakob
full_name: Ostermeier, Jakob
last_name: Ostermeier
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
citation:
ama: Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability
of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials.
2022;24(10). doi:10.1002/adem.202200874
apa: Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut,
G., Schaper, M., & Grydin, O. (2022). Mechanical Properties and Joinability
of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials,
24(10), Article 2200874. https://doi.org/10.1002/adem.202200874
bibtex: '@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022,
title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll
Casting}, volume={24}, DOI={10.1002/adem.202200874},
number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley},
author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan
Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin,
Olexandr}, year={2022} }'
chicago: Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias
Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties
and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced
Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.
ieee: 'M. Neuser et al., “Mechanical Properties and Joinability of AlSi9
Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials,
vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.'
mla: Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy
Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol.
24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
short: M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut,
M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
date_created: 2023-01-12T09:33:55Z
date_updated: 2024-03-14T15:22:33Z
department:
- _id: '158'
- _id: '157'
- _id: '321'
doi: 10.1002/adem.202200874
intvolume: ' 24'
issue: '10'
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202200874
oa: '1'
project:
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll
Casting
type: journal_article
user_id: '32340'
volume: 24
year: '2022'
...
---
_id: '31238'
article_number: '100108'
author:
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Simon
full_name: Wituschek, Simon
last_name: Wituschek
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Behdad
full_name: Sadeghian, Behdad
last_name: Sadeghian
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian-Roman
full_name: Bielak, Christian-Roman
last_name: Bielak
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
citation:
ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods
for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100108
apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J.,
Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke,
M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials
– Methods for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et
al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties}, DOI={10.1016/j.jajp.2022.100108},
number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek,
Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad
and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }'
chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz,
Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for
the Continuous Characterization of Process, Microstructure and Properties.” Journal
of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100108.
ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the
Continuous Characterization of Process, Microstructure and Properties,” Journal
of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.'
mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties.” Journal of Advanced
Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß,
B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak,
J. Troschitz, Journal of Advanced Joining Processes (2022).
date_created: 2022-05-12T13:48:16Z
date_updated: 2024-03-14T15:23:30Z
department:
- _id: '158'
doi: 10.1016/j.jajp.2022.100108
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Clinching of Aluminum Materials – Methods for the Continuous Characterization
of Process, Microstructure and Properties
type: journal_article
user_id: '32340'
year: '2022'
...
---
_id: '34215'
abstract:
- lang: eng
text: 'Clinching as a mechanical joining technique allows a fast and reliable joining
of metal sheets in large-scale production. An efficient design and dimensioning
of clinched joints requires a holistic understanding of the material, the joining
process and the resulting properties of the joint. In this paper, the process
chain for clinching metal sheets is described and experimental techniques are
proposed to analyze the process-microstructure-property relationships from the
sheet metal to the joined structure. At the example of clinching aluminum EN AW
6014, characterization methods are applied and discussed for the following characteristics:
the mechanical properties of the sheet materials, the tribological behavior in
the joining system, the joining process and the resulting material structure,
the load-bearing behavior of the joint, the damage and degradation as well as
the service life and crack growth behavior. The compilation of the characterization
methods gives an overview on the advantages and weaknesses of the methods and
the multiple interactions of material, process and properties during clinching.
In addition, the results of the analyses on EN AW 6014 can be applied for parameterization
and validation of simulations.'
article_number: '100108'
author:
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Simon
full_name: Wituschek, Simon
last_name: Wituschek
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Behdad
full_name: Sadeghian, Behdad
last_name: Sadeghian
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
citation:
ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods
for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108
apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J.,
Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke,
M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials
– Methods for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et
al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108},
number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek,
Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad
and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }'
chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz,
Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for
the Continuous Characterization of Process, Microstructure and Properties.” Journal
of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108.
ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the
Continuous Characterization of Process, Microstructure and Properties,” Journal
of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.'
mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties.” Journal of Advanced
Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß,
B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak,
J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
date_created: 2022-12-05T21:17:22Z
date_updated: 2024-03-20T11:54:33Z
department:
- _id: '630'
- _id: '158'
doi: 10.1016/j.jajp.2022.100108
intvolume: ' 5'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
- _id: '145'
name: 'TRR 285 – C01: TRR 285 - Subproject C01'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '141'
name: 'TRR 285 – B02: TRR 285 - Subproject B02'
- _id: '138'
name: 'TRR 285 – A04: TRR 285 - Subproject A04'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '149'
name: 'TRR 285 – C05: TRR 285 - Subproject C05'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Clinching of Aluminum Materials – Methods for the Continuous Characterization
of Process, Microstructure and Properties
type: journal_article
user_id: '34782'
volume: 5
year: '2022'
...
---
_id: '40154'
abstract:
- lang: eng
text: The development of bioresorbable materials for temporary implantation
enables progress in medical technology. Iron (Fe)-based degradable materials are
biocompatible and exhibit good mechanical properties, but their degradation rate
is low. Aside from alloying with Manganese (Mn), the creation of phases with high
electrochemical potential such as silver (Ag) phases to cause the anodic dissolution
of FeMn is promising. However, to enable residue-free dissolution, the Ag needs
to be modified. This concern is addressed, as FeMn modified with a degradable
Ag-Calcium-Lanthanum (AgCaLa) alloy is investigated. The electrochemical properties
and the degradation behavior are determined via a static immersion test. The local
differences in electrochemical potential increase the degradation rate (low pH
values), and the formation of gaps around the Ag phases (neutral pH values) demonstrates
the benefit of the strategy. Nevertheless, the formation of corrosion-inhibiting
layers avoids an increased degradation rate under a neutral pH value. The complete
bioresorption of the material is possible since the phases of the degradable AgCaLa
alloy dissolve after the FeMn matrix. Cell viability tests reveal biocompatibility,
and the antibacterial activity of the degradation supernatant is observed. Thus,
FeMn modified with degradable AgCaLa phases is promising as a bioresorbable material
if corrosion-inhibiting layers can be diminished.
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Jingyuan
full_name: Huang, Jingyuan
last_name: Huang
- first_name: Viviane
full_name: Filor, Viviane
last_name: Filor
- first_name: Rafael Hernan
full_name: Mateus-Vargas, Rafael Hernan
last_name: Mateus-Vargas
- first_name: Hilke
full_name: Oltmanns, Hilke
last_name: Oltmanns
- first_name: Jessica
full_name: Meißner, Jessica
last_name: Meißner
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy
for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials.
2022;13(4):185. doi:10.3390/jfb13040185
apa: Krüger, J. T., Hoyer, K.-P., Huang, J., Filor, V., Mateus-Vargas, R. H., Oltmanns,
H., Meißner, J., Grundmeier, G., & Schaper, M. (2022). FeMn with Phases of
a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal
of Functional Biomaterials, 13(4), 185. https://doi.org/10.3390/jfb13040185
bibtex: '@article{Krüger_Hoyer_Huang_Filor_Mateus-Vargas_Oltmanns_Meißner_Grundmeier_Schaper_2022,
title={FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted
Bioresorbability}, volume={13}, DOI={10.3390/jfb13040185},
number={4}, journal={Journal of Functional Biomaterials}, publisher={MDPI AG},
author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Huang, Jingyuan and Filor,
Viviane and Mateus-Vargas, Rafael Hernan and Oltmanns, Hilke and Meißner, Jessica
and Grundmeier, Guido and Schaper, Mirko}, year={2022}, pages={185} }'
chicago: 'Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael
Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko
Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted
Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022):
185. https://doi.org/10.3390/jfb13040185.'
ieee: 'J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for
Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials,
vol. 13, no. 4, p. 185, 2022, doi: 10.3390/jfb13040185.'
mla: Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free
and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol.
13, no. 4, MDPI AG, 2022, p. 185, doi:10.3390/jfb13040185.
short: J.T. Krüger, K.-P. Hoyer, J. Huang, V. Filor, R.H. Mateus-Vargas, H. Oltmanns,
J. Meißner, G. Grundmeier, M. Schaper, Journal of Functional Biomaterials 13 (2022)
185.
date_created: 2023-01-26T06:39:42Z
date_updated: 2023-04-27T16:39:26Z
department:
- _id: '302'
- _id: '158'
doi: 10.3390/jfb13040185
intvolume: ' 13'
issue: '4'
keyword:
- Biomedical Engineering
- Biomaterials
language:
- iso: eng
page: '185'
publication: Journal of Functional Biomaterials
publication_identifier:
issn:
- 2079-4983
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability
type: journal_article
user_id: '43720'
volume: 13
year: '2022'
...
---
_id: '33723'
abstract:
- lang: eng
text: The development of bioresorbable materials for temporary implantation
enables progress in medical technology. Iron (Fe)-based degradable materials are
biocompatible and exhibit good mechanical properties, but their degradation rate
is low. Aside from alloying with Manganese (Mn), the creation of phases with high
electrochemical potential such as silver (Ag) phases to cause the anodic dissolution
of FeMn is promising. However, to enable residue-free dissolution, the Ag needs
to be modified. This concern is addressed, as FeMn modified with a degradable
Ag-Calcium-Lanthanum (AgCaLa) alloy is investigated. The electrochemical properties
and the degradation behavior are determined via a static immersion test. The local
differences in electrochemical potential increase the degradation rate (low pH
values), and the formation of gaps around the Ag phases (neutral pH values) demonstrates
the benefit of the strategy. Nevertheless, the formation of corrosion-inhibiting
layers avoids an increased degradation rate under a neutral pH value. The complete
bioresorption of the material is possible since the phases of the degradable AgCaLa
alloy dissolve after the FeMn matrix. Cell viability tests reveal biocompatibility,
and the antibacterial activity of the degradation supernatant is observed. Thus,
FeMn modified with degradable AgCaLa phases is promising as a bioresorbable material
if corrosion-inhibiting layers can be diminished.
article_number: '185'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Jingyuan
full_name: Huang, Jingyuan
last_name: Huang
- first_name: Viviane
full_name: Filor, Viviane
last_name: Filor
- first_name: Rafael Hernan
full_name: Mateus-Vargas, Rafael Hernan
last_name: Mateus-Vargas
- first_name: Hilke
full_name: Oltmanns, Hilke
last_name: Oltmanns
- first_name: Jessica
full_name: Meißner, Jessica
last_name: Meißner
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy
for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials.
2022;13(4). doi:10.3390/jfb13040185
apa: Krüger, J. T., Hoyer, K.-P., Huang, J., Filor, V., Mateus-Vargas, R. H., Oltmanns,
H., Meißner, J., Grundmeier, G., & Schaper, M. (2022). FeMn with Phases of
a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal
of Functional Biomaterials, 13(4), Article 185. https://doi.org/10.3390/jfb13040185
bibtex: '@article{Krüger_Hoyer_Huang_Filor_Mateus-Vargas_Oltmanns_Meißner_Grundmeier_Schaper_2022,
title={FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted
Bioresorbability}, volume={13}, DOI={10.3390/jfb13040185},
number={4185}, journal={Journal of Functional Biomaterials}, publisher={MDPI AG},
author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Huang, Jingyuan and Filor,
Viviane and Mateus-Vargas, Rafael Hernan and Oltmanns, Hilke and Meißner, Jessica
and Grundmeier, Guido and Schaper, Mirko}, year={2022} }'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael
Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko
Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted
Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022).
https://doi.org/10.3390/jfb13040185.
ieee: 'J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for
Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials,
vol. 13, no. 4, Art. no. 185, 2022, doi: 10.3390/jfb13040185.'
mla: Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free
and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol.
13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
short: J.T. Krüger, K.-P. Hoyer, J. Huang, V. Filor, R.H. Mateus-Vargas, H. Oltmanns,
J. Meißner, G. Grundmeier, M. Schaper, Journal of Functional Biomaterials 13 (2022).
date_created: 2022-10-14T07:18:50Z
date_updated: 2023-04-27T16:41:07Z
department:
- _id: '9'
- _id: '158'
doi: 10.3390/jfb13040185
intvolume: ' 13'
issue: '4'
keyword:
- Biomedical Engineering
- Biomaterials
language:
- iso: eng
publication: Journal of Functional Biomaterials
publication_identifier:
issn:
- 2079-4983
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability
type: journal_article
user_id: '43720'
volume: 13
year: '2022'
...
---
_id: '33498'
article_number: '2201008'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Carolin
full_name: Zinn, Carolin
last_name: Zinn
citation:
ama: Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with
Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted
Degradation Rate. Advanced Engineering Materials. Published online 2022.
doi:https://doi.org/10.1002/adem.202201008
apa: Krüger, J. T., Hoyer, K.-P., Andreiev, A., Schaper, M., & Zinn, C. (2022).
Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting
for Implants with Adapted Degradation Rate. Advanced Engineering Materials,
Article 2201008. https://doi.org/10.1002/adem.202201008
bibtex: '@article{Krüger_Hoyer_Andreiev_Schaper_Zinn_2022, title={Modification of
Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants
with Adapted Degradation Rate}, DOI={https://doi.org/10.1002/adem.202201008},
number={2201008}, journal={Advanced Engineering Materials}, author={Krüger, Jan
Tobias and Hoyer, Kay-Peter and Andreiev, Anatolii and Schaper, Mirko and Zinn,
Carolin}, year={2022} }'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, Anatolii Andreiev, Mirko Schaper,
and Carolin Zinn. “Modification of Iron with Degradable Silver Phases Processed
via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced
Engineering Materials, 2022. https://doi.org/10.1002/adem.202201008.
ieee: 'J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modification
of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants
with Adapted Degradation Rate,” Advanced Engineering Materials, Art. no.
2201008, 2022, doi: https://doi.org/10.1002/adem.202201008.'
mla: Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases
Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.”
Advanced Engineering Materials, 2201008, 2022, doi:https://doi.org/10.1002/adem.202201008.
short: J.T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, C. Zinn, Advanced Engineering
Materials (2022).
date_created: 2022-09-29T08:40:55Z
date_updated: 2023-04-27T16:41:20Z
department:
- _id: '9'
- _id: '158'
doi: https://doi.org/10.1002/adem.202201008
language:
- iso: eng
publication: Advanced Engineering Materials
quality_controlled: '1'
status: public
title: Modification of Iron with Degradable Silver Phases Processed via Laser Beam
Melting for Implants with Adapted Degradation Rate
type: journal_article
user_id: '43720'
year: '2022'
...
---
_id: '41494'
abstract:
- lang: eng
text: The development of bioresorbable materials for temporary implantation
enables progress in medical technology. Iron (Fe)-based degradable materials are
biocompatible and exhibit good mechanical properties, but their degradation rate
is low. Aside from alloying with Manganese (Mn), the creation of phases with high
electrochemical potential such as silver (Ag) phases to cause the anodic dissolution
of FeMn is promising. However, to enable residue-free dissolution, the Ag needs
to be modified. This concern is addressed, as FeMn modified with a degradable
Ag-Calcium-Lanthanum (AgCaLa) alloy is investigated. The electrochemical properties
and the degradation behavior are determined via a static immersion test. The local
differences in electrochemical potential increase the degradation rate (low pH
values), and the formation of gaps around the Ag phases (neutral pH values) demonstrates
the benefit of the strategy. Nevertheless, the formation of corrosion-inhibiting
layers avoids an increased degradation rate under a neutral pH value. The complete
bioresorption of the material is possible since the phases of the degradable AgCaLa
alloy dissolve after the FeMn matrix. Cell viability tests reveal biocompatibility,
and the antibacterial activity of the degradation supernatant is observed. Thus,
FeMn modified with degradable AgCaLa phases is promising as a bioresorbable material
if corrosion-inhibiting layers can be diminished.
article_number: '185'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Jingyuan
full_name: Huang, Jingyuan
last_name: Huang
- first_name: Viviane
full_name: Filor, Viviane
last_name: Filor
- first_name: Rafael Hernan
full_name: Mateus-Vargas, Rafael Hernan
last_name: Mateus-Vargas
- first_name: Hilke
full_name: Oltmanns, Hilke
last_name: Oltmanns
- first_name: Jessica
full_name: Meißner, Jessica
last_name: Meißner
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy
for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials.
2022;13(4). doi:10.3390/jfb13040185
apa: Krüger, J. T., Hoyer, K.-P., Huang, J., Filor, V., Mateus-Vargas, R. H., Oltmanns,
H., Meißner, J., Grundmeier, G., & Schaper, M. (2022). FeMn with Phases of
a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal
of Functional Biomaterials, 13(4), Article 185. https://doi.org/10.3390/jfb13040185
bibtex: '@article{Krüger_Hoyer_Huang_Filor_Mateus-Vargas_Oltmanns_Meißner_Grundmeier_Schaper_2022,
title={FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted
Bioresorbability}, volume={13}, DOI={10.3390/jfb13040185},
number={4185}, journal={Journal of Functional Biomaterials}, publisher={MDPI AG},
author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Huang, Jingyuan and Filor,
Viviane and Mateus-Vargas, Rafael Hernan and Oltmanns, Hilke and Meißner, Jessica
and Grundmeier, Guido and Schaper, Mirko}, year={2022} }'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael
Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko
Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted
Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022).
https://doi.org/10.3390/jfb13040185.
ieee: 'J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for
Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials,
vol. 13, no. 4, Art. no. 185, 2022, doi: 10.3390/jfb13040185.'
mla: Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free
and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol.
13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
short: J.T. Krüger, K.-P. Hoyer, J. Huang, V. Filor, R.H. Mateus-Vargas, H. Oltmanns,
J. Meißner, G. Grundmeier, M. Schaper, Journal of Functional Biomaterials 13 (2022).
date_created: 2023-02-02T14:26:25Z
date_updated: 2023-04-27T16:45:32Z
department:
- _id: '9'
- _id: '158'
doi: 10.3390/jfb13040185
intvolume: ' 13'
issue: '4'
keyword:
- Biomedical Engineering
- Biomaterials
language:
- iso: eng
publication: Journal of Functional Biomaterials
publication_identifier:
issn:
- 2079-4983
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability
type: journal_article
user_id: '43720'
volume: 13
year: '2022'
...
---
_id: '32332'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases
in an iron-manganese matrix for bioresorbable implants using varying laser beam
melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387.
doi:10.1016/j.jmrt.2022.06.006
apa: Krüger, J. T., Hoyer, K.-P., Hengsbach, F., & Schaper, M. (2022). Formation
of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants
using varying laser beam melting strategies. Journal of Materials Research
and Technology, 19, 2369–2387. https://doi.org/10.1016/j.jmrt.2022.06.006
bibtex: '@article{Krüger_Hoyer_Hengsbach_Schaper_2022, title={Formation of insoluble
silver-phases in an iron-manganese matrix for bioresorbable implants using varying
laser beam melting strategies}, volume={19}, DOI={10.1016/j.jmrt.2022.06.006},
journal={Journal of Materials Research and Technology}, publisher={Elsevier BV},
author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Hengsbach, Florian and Schaper,
Mirko}, year={2022}, pages={2369–2387} }'
chicago: 'Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper.
“Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable
Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials
Research and Technology 19 (2022): 2369–87. https://doi.org/10.1016/j.jmrt.2022.06.006.'
ieee: 'J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble
silver-phases in an iron-manganese matrix for bioresorbable implants using varying
laser beam melting strategies,” Journal of Materials Research and Technology,
vol. 19, pp. 2369–2387, 2022, doi: 10.1016/j.jmrt.2022.06.006.'
mla: Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese
Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.”
Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022,
pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
short: J.T. Krüger, K.-P. Hoyer, F. Hengsbach, M. Schaper, Journal of Materials
Research and Technology 19 (2022) 2369–2387.
date_created: 2022-07-07T13:55:10Z
date_updated: 2023-04-27T16:45:17Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.jmrt.2022.06.006
intvolume: ' 19'
keyword:
- Metals and Alloys
- Surfaces
- Coatings and Films
- Biomaterials
- Ceramics and Composites
language:
- iso: eng
page: 2369-2387
publication: Journal of Materials Research and Technology
publication_identifier:
issn:
- 2238-7854
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable
implants using varying laser beam melting strategies
type: journal_article
user_id: '43720'
volume: 19
year: '2022'
...
---
_id: '41498'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases
in an iron-manganese matrix for bioresorbable implants using varying laser beam
melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387.
doi:10.1016/j.jmrt.2022.06.006
apa: Krüger, J. T., Hoyer, K.-P., Hengsbach, F., & Schaper, M. (2022). Formation
of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants
using varying laser beam melting strategies. Journal of Materials Research
and Technology, 19, 2369–2387. https://doi.org/10.1016/j.jmrt.2022.06.006
bibtex: '@article{Krüger_Hoyer_Hengsbach_Schaper_2022, title={Formation of insoluble
silver-phases in an iron-manganese matrix for bioresorbable implants using varying
laser beam melting strategies}, volume={19}, DOI={10.1016/j.jmrt.2022.06.006},
journal={Journal of Materials Research and Technology}, publisher={Elsevier BV},
author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Hengsbach, Florian and Schaper,
Mirko}, year={2022}, pages={2369–2387} }'
chicago: 'Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper.
“Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable
Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials
Research and Technology 19 (2022): 2369–87. https://doi.org/10.1016/j.jmrt.2022.06.006.'
ieee: 'J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble
silver-phases in an iron-manganese matrix for bioresorbable implants using varying
laser beam melting strategies,” Journal of Materials Research and Technology,
vol. 19, pp. 2369–2387, 2022, doi: 10.1016/j.jmrt.2022.06.006.'
mla: Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese
Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.”
Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022,
pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
short: J.T. Krüger, K.-P. Hoyer, F. Hengsbach, M. Schaper, Journal of Materials
Research and Technology 19 (2022) 2369–2387.
date_created: 2023-02-02T14:28:03Z
date_updated: 2023-04-27T16:46:09Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.jmrt.2022.06.006
intvolume: ' 19'
keyword:
- Metals and Alloys
- Surfaces
- Coatings and Films
- Biomaterials
- Ceramics and Composites
language:
- iso: eng
page: 2369-2387
publication: Journal of Materials Research and Technology
publication_identifier:
issn:
- 2238-7854
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable
implants using varying laser beam melting strategies
type: journal_article
user_id: '43720'
volume: 19
year: '2022'
...
---
_id: '30103'
author:
- first_name: Jingyuan
full_name: Huang, Jingyuan
last_name: Huang
- first_name: Alejandro Gonzalez
full_name: Orive, Alejandro Gonzalez
last_name: Orive
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Huang J, Orive AG, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence
of proteins on the corrosion of a conventional and selective laser beam melted
FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200:110186.
doi:10.1016/j.corsci.2022.110186
apa: Huang, J., Orive, A. G., Krüger, J. T., Hoyer, K.-P., Keller, A., & Grundmeier,
G. (2022). Influence of proteins on the corrosion of a conventional and selective
laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science,
200, 110186. https://doi.org/10.1016/j.corsci.2022.110186
bibtex: '@article{Huang_Orive_Krüger_Hoyer_Keller_Grundmeier_2022, title={Influence
of proteins on the corrosion of a conventional and selective laser beam melted
FeMn alloy in physiological electrolytes}, volume={200}, DOI={10.1016/j.corsci.2022.110186},
journal={Corrosion Science}, publisher={Elsevier BV}, author={Huang, Jingyuan
and Orive, Alejandro Gonzalez and Krüger, Jan Tobias and Hoyer, Kay-Peter and
Keller, Adrian and Grundmeier, Guido}, year={2022}, pages={110186} }'
chicago: 'Huang, Jingyuan, Alejandro Gonzalez Orive, Jan Tobias Krüger, Kay-Peter
Hoyer, Adrian Keller, and Guido Grundmeier. “Influence of Proteins on the Corrosion
of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological
Electrolytes.” Corrosion Science 200 (2022): 110186. https://doi.org/10.1016/j.corsci.2022.110186.'
ieee: 'J. Huang, A. G. Orive, J. T. Krüger, K.-P. Hoyer, A. Keller, and G. Grundmeier,
“Influence of proteins on the corrosion of a conventional and selective laser
beam melted FeMn alloy in physiological electrolytes,” Corrosion Science,
vol. 200, p. 110186, 2022, doi: 10.1016/j.corsci.2022.110186.'
mla: Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional
and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion
Science, vol. 200, Elsevier BV, 2022, p. 110186, doi:10.1016/j.corsci.2022.110186.
short: J. Huang, A.G. Orive, J.T. Krüger, K.-P. Hoyer, A. Keller, G. Grundmeier,
Corrosion Science 200 (2022) 110186.
date_created: 2022-02-25T09:32:43Z
date_updated: 2023-04-27T16:47:42Z
department:
- _id: '302'
- _id: '158'
doi: 10.1016/j.corsci.2022.110186
intvolume: ' 200'
keyword:
- General Materials Science
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: '110186'
publication: Corrosion Science
publication_identifier:
issn:
- 0010-938X
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Influence of proteins on the corrosion of a conventional and selective laser
beam melted FeMn alloy in physiological electrolytes
type: journal_article
user_id: '48411'
volume: 200
year: '2022'
...
---
_id: '41504'
article_number: '110186'
author:
- first_name: Jingyuan
full_name: Huang, Jingyuan
last_name: Huang
- first_name: Alejandro
full_name: Gonzalez Orive, Alejandro
last_name: Gonzalez Orive
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Huang J, Gonzalez Orive A, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence
of proteins on the corrosion of a conventional and selective laser beam melted
FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200.
doi:10.1016/j.corsci.2022.110186
apa: Huang, J., Gonzalez Orive, A., Krüger, J. T., Hoyer, K.-P., Keller, A., &
Grundmeier, G. (2022). Influence of proteins on the corrosion of a conventional
and selective laser beam melted FeMn alloy in physiological electrolytes. Corrosion
Science, 200, Article 110186. https://doi.org/10.1016/j.corsci.2022.110186
bibtex: '@article{Huang_Gonzalez Orive_Krüger_Hoyer_Keller_Grundmeier_2022, title={Influence
of proteins on the corrosion of a conventional and selective laser beam melted
FeMn alloy in physiological electrolytes}, volume={200}, DOI={10.1016/j.corsci.2022.110186},
number={110186}, journal={Corrosion Science}, publisher={Elsevier BV}, author={Huang,
Jingyuan and Gonzalez Orive, Alejandro and Krüger, Jan Tobias and Hoyer, Kay-Peter
and Keller, Adrian and Grundmeier, Guido}, year={2022} }'
chicago: Huang, Jingyuan, Alejandro Gonzalez Orive, Jan Tobias Krüger, Kay-Peter
Hoyer, Adrian Keller, and Guido Grundmeier. “Influence of Proteins on the Corrosion
of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological
Electrolytes.” Corrosion Science 200 (2022). https://doi.org/10.1016/j.corsci.2022.110186.
ieee: 'J. Huang, A. Gonzalez Orive, J. T. Krüger, K.-P. Hoyer, A. Keller, and G.
Grundmeier, “Influence of proteins on the corrosion of a conventional and selective
laser beam melted FeMn alloy in physiological electrolytes,” Corrosion Science,
vol. 200, Art. no. 110186, 2022, doi: 10.1016/j.corsci.2022.110186.'
mla: Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional
and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion
Science, vol. 200, 110186, Elsevier BV, 2022, doi:10.1016/j.corsci.2022.110186.
short: J. Huang, A. Gonzalez Orive, J.T. Krüger, K.-P. Hoyer, A. Keller, G. Grundmeier,
Corrosion Science 200 (2022).
date_created: 2023-02-02T14:30:17Z
date_updated: 2023-04-27T16:47:31Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.corsci.2022.110186
intvolume: ' 200'
keyword:
- General Materials Science
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
publication: Corrosion Science
publication_identifier:
issn:
- 0010-938X
publication_status: published
publisher: Elsevier BV
status: public
title: Influence of proteins on the corrosion of a conventional and selective laser
beam melted FeMn alloy in physiological electrolytes
type: journal_article
user_id: '48411'
volume: 200
year: '2022'
...
---
_id: '41493'
article_number: '2201008'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Carolin
full_name: Zinn, Carolin
last_name: Zinn
citation:
ama: Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with
Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted
Degradation Rate. Advanced Engineering Materials. Published online 2022.
doi:10.1002/adem.202201008
apa: Krüger, J. T., Hoyer, K.-P., Andreiev, A., Schaper, M., & Zinn, C. (2022).
Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting
for Implants with Adapted Degradation Rate. Advanced Engineering Materials,
Article 2201008. https://doi.org/10.1002/adem.202201008
bibtex: '@article{Krüger_Hoyer_Andreiev_Schaper_Zinn_2022, title={Modification of
Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants
with Adapted Degradation Rate}, DOI={10.1002/adem.202201008},
number={2201008}, journal={Advanced Engineering Materials}, publisher={Wiley},
author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Andreiev, Anatolii and Schaper,
Mirko and Zinn, Carolin}, year={2022} }'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, Anatolii Andreiev, Mirko Schaper,
and Carolin Zinn. “Modification of Iron with Degradable Silver Phases Processed
via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced
Engineering Materials, 2022. https://doi.org/10.1002/adem.202201008.
ieee: 'J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modification
of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants
with Adapted Degradation Rate,” Advanced Engineering Materials, Art. no.
2201008, 2022, doi: 10.1002/adem.202201008.'
mla: Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases
Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.”
Advanced Engineering Materials, 2201008, Wiley, 2022, doi:10.1002/adem.202201008.
short: J.T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, C. Zinn, Advanced Engineering
Materials (2022).
date_created: 2023-02-02T14:25:30Z
date_updated: 2023-04-27T16:46:44Z
department:
- _id: '9'
- _id: '158'
doi: 10.1002/adem.202201008
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
publisher: Wiley
status: public
title: Modification of Iron with Degradable Silver Phases Processed via Laser Beam
Melting for Implants with Adapted Degradation Rate
type: journal_article
user_id: '48411'
year: '2022'
...
---
_id: '24790'
abstract:
- lang: eng
text: Implants often overtake body function just for a certain time and remain as
an unnecessary foreign body or have to be removed. Thus, resorbable implants are
highly beneficial to reduce patient burden. Besides established materials, Iron-(Fe)-based
alloys are in focus due to superior mechanical properties and good biocompatibility.
However, their degradation rate needs to be increased. Phases with high electrochemical
potential could promote the dissolution of residual material based on the galvanic
coupling. Silver (Ag) is promising due to its high electrochemical potential (+0.8
V vs. SHE), immiscibility with Fe, biocompatibility, and anti-bacterial properties.
But to prevent adverse consequences the Ag-particles, remaining after dissolution
of the matrix, need to dissolve. Thus, a bioresorbable Ag-alloy is required. Regarding
the electrochemical potential and degradation behavior of binary alloys, Cerium
(Ce) and Lanthanum (La) are well-suited considering their biocompatibility and
antibacterial behavior. Accordingly, this research addresses AgCe and AgCeLa alloys
as additives for Fe-based materials with adapted degradation behavior. Furthermore,
degradable Ag-alloys combined with inert implant materials could enable the controlled
release of antibacterial active Ag-ions.
article_number: '130890'
article_type: original
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted
Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
apa: Krüger, J. T., Hoyer, K.-P., & Schaper, M. (2021). Bioresorbable AgCe and
AgCeLa alloys for adapted Fe-based implants. Materials Letters, 306,
Article 130890. https://doi.org/10.1016/j.matlet.2021.130890
bibtex: '@article{Krüger_Hoyer_Schaper_2021, title={Bioresorbable AgCe and AgCeLa
alloys for adapted Fe-based implants}, volume={306}, DOI={10.1016/j.matlet.2021.130890},
number={130890}, journal={Materials Letters}, author={Krüger, Jan Tobias and Hoyer,
Kay-Peter and Schaper, Mirko}, year={2021} }'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable
AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters
306 (2021). https://doi.org/10.1016/j.matlet.2021.130890.
ieee: 'J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa
alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art.
no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.'
mla: Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted
Fe-Based Implants.” Materials Letters, vol. 306, 130890, 2021, doi:10.1016/j.matlet.2021.130890.
short: J.T. Krüger, K.-P. Hoyer, M. Schaper, Materials Letters 306 (2021).
date_created: 2021-09-22T06:49:22Z
date_updated: 2023-06-01T14:33:57Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.matlet.2021.130890
intvolume: ' 306'
language:
- iso: eng
publication: Materials Letters
publication_identifier:
issn:
- 0167-577X
publication_status: published
quality_controlled: '1'
status: public
title: Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants
type: journal_article
user_id: '43720'
volume: 306
year: '2021'
...
---
_id: '41509'
article_number: '130890'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted
Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
apa: Krüger, J. T., Hoyer, K.-P., & Schaper, M. (2021). Bioresorbable AgCe and
AgCeLa alloys for adapted Fe-based implants. Materials Letters, 306,
Article 130890. https://doi.org/10.1016/j.matlet.2021.130890
bibtex: '@article{Krüger_Hoyer_Schaper_2021, title={Bioresorbable AgCe and AgCeLa
alloys for adapted Fe-based implants}, volume={306}, DOI={10.1016/j.matlet.2021.130890},
number={130890}, journal={Materials Letters}, publisher={Elsevier BV}, author={Krüger,
Jan Tobias and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable
AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters
306 (2021). https://doi.org/10.1016/j.matlet.2021.130890.
ieee: 'J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa
alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art.
no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.'
mla: Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted
Fe-Based Implants.” Materials Letters, vol. 306, 130890, Elsevier BV, 2021,
doi:10.1016/j.matlet.2021.130890.
short: J.T. Krüger, K.-P. Hoyer, M. Schaper, Materials Letters 306 (2021).
date_created: 2023-02-02T14:32:48Z
date_updated: 2023-06-01T14:34:08Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.matlet.2021.130890
intvolume: ' 306'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: Materials Letters
publication_identifier:
issn:
- 0167-577X
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants
type: journal_article
user_id: '43720'
volume: 306
year: '2021'
...
---
_id: '41514'
article_number: '159544'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Viviane
full_name: Filor, Viviane
last_name: Filor
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Manfred
full_name: Kietzmann, Manfred
last_name: Kietzmann
- first_name: Jessica
full_name: Meißner, Jessica
last_name: Meißner
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based
bioresorbable implants with adapted degradation. Journal of Alloys and Compounds.
2021;871. doi:10.1016/j.jallcom.2021.159544
apa: Krüger, J. T., Hoyer, K.-P., Filor, V., Pramanik, S., Kietzmann, M., Meißner,
J., & Schaper, M. (2021). Novel AgCa and AgCaLa alloys for Fe-based bioresorbable
implants with adapted degradation. Journal of Alloys and Compounds, 871,
Article 159544. https://doi.org/10.1016/j.jallcom.2021.159544
bibtex: '@article{Krüger_Hoyer_Filor_Pramanik_Kietzmann_Meißner_Schaper_2021, title={Novel
AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation},
volume={871}, DOI={10.1016/j.jallcom.2021.159544},
number={159544}, journal={Journal of Alloys and Compounds}, publisher={Elsevier
BV}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Filor, Viviane and Pramanik,
Sudipta and Kietzmann, Manfred and Meißner, Jessica and Schaper, Mirko}, year={2021}
}'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred
Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for
Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys
and Compounds 871 (2021). https://doi.org/10.1016/j.jallcom.2021.159544.
ieee: 'J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable
implants with adapted degradation,” Journal of Alloys and Compounds, vol.
871, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.'
mla: Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable
Implants with Adapted Degradation.” Journal of Alloys and Compounds, vol.
871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.
short: J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner,
M. Schaper, Journal of Alloys and Compounds 871 (2021).
date_created: 2023-02-02T14:34:42Z
date_updated: 2023-06-01T14:35:36Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.jallcom.2021.159544
intvolume: ' 871'
keyword:
- Materials Chemistry
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
publication: Journal of Alloys and Compounds
publication_identifier:
issn:
- 0925-8388
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted
degradation
type: journal_article
user_id: '43720'
volume: 871
year: '2021'
...
---
_id: '24087'
abstract:
- lang: eng
text: Resorbable implants are highly beneficial to reduce patient burden since they
need not be removed after a defined period. Currently, magnesium (Mg) and polymers
are being applied as bioresorbable materials. However, for some applications the
insufficient mechanical properties and high degradation rate of Mg cause the need
for new materials. Iron (Fe)-based alloys are promising due to their biocompatibility
and good mechanical properties, but their degradation rate is too low and needs
to be adapted eg. via alloying with manganese (Mn). Besides, phases with high
electrochemical potential lead to increased degradation of residual material with
lower potential based on the galvanic coupling. Here, silver (Ag) is promising
for the formation of such phases due to its high electrochemical potential (+0.8
V vs. SHE), immiscibility with Fe, biocompatibility, and anti-bacterial properties.
Since remaining silver particles can lead to adverse consequences as thrombosis,
these particles need to dissolve after the matrix material. Thus a silver alloy
with high electrochemical potential, biocompatibility, and adjusted degradation
behavior is required as an additive for iron-based bioresorbable materials. Several
silver alloying systems are possible, but regarding the electrochemical potential
and degradation behavior of binary alloys, calcium (Ca) and lanthanum (La) are
best-suited considering their biocompatibility. Accordingly, this research addresses
AgCa and AgCaLa alloys as additives for iron-based degradable materials with adapted
degradation behavior.
article_number: '159544'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Viviane
full_name: Filor, Viviane
last_name: Filor
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Manfred
full_name: Kietzmann, Manfred
last_name: Kietzmann
- first_name: Jessica
full_name: Meißner, Jessica
last_name: Meißner
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based
bioresorbable implants with adapted degradation. Journal of Alloys and Compounds.
Published online 2021. doi:10.1016/j.jallcom.2021.159544
apa: Krüger, J. T., Hoyer, K.-P., Filor, V., Pramanik, S., Kietzmann, M., Meißner,
J., & Schaper, M. (2021). Novel AgCa and AgCaLa alloys for Fe-based bioresorbable
implants with adapted degradation. Journal of Alloys and Compounds, Article
159544. https://doi.org/10.1016/j.jallcom.2021.159544
bibtex: '@article{Krüger_Hoyer_Filor_Pramanik_Kietzmann_Meißner_Schaper_2021, title={Novel
AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation},
DOI={10.1016/j.jallcom.2021.159544},
number={159544}, journal={Journal of Alloys and Compounds}, author={Krüger, Jan
Tobias and Hoyer, Kay-Peter and Filor, Viviane and Pramanik, Sudipta and Kietzmann,
Manfred and Meißner, Jessica and Schaper, Mirko}, year={2021} }'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred
Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for
Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys
and Compounds, 2021. https://doi.org/10.1016/j.jallcom.2021.159544.
ieee: 'J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable
implants with adapted degradation,” Journal of Alloys and Compounds, Art.
no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.'
mla: Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable
Implants with Adapted Degradation.” Journal of Alloys and Compounds, 159544,
2021, doi:10.1016/j.jallcom.2021.159544.
short: J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner,
M. Schaper, Journal of Alloys and Compounds (2021).
date_created: 2021-09-09T15:40:39Z
date_updated: 2023-06-01T14:39:34Z
department:
- _id: '158'
doi: 10.1016/j.jallcom.2021.159544
language:
- iso: eng
publication: Journal of Alloys and Compounds
publication_identifier:
issn:
- 0925-8388
publication_status: published
quality_controlled: '1'
status: public
title: Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted
degradation
type: journal_article
user_id: '43720'
year: '2021'
...