[{"title":"Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)","conference":{"name":"International Congress on Rheology","start_date":"2023-07-29","end_date":"2023-08-04","location":"Athens"},"date_updated":"2024-11-08T09:18:24Z","author":[{"first_name":"Moritz","orcid":"0000-0001-9101-8828","last_name":"Neukötter","full_name":"Neukötter, Moritz","id":"45530"},{"first_name":"Steffen","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298","full_name":"Jesinghausen, Steffen","id":"3959"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464","full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim"}],"date_created":"2023-04-21T11:21:10Z","year":"2023","citation":{"chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster),” 2023.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster),” presented at the International Congress on Rheology, Athens, 2023.","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster). In: ; 2023.","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.","mla":"Neukötter, Moritz, et al. <i>Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)</i>. 2023.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2023, title={Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2023} }","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2023). <i>Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)</i>. International Congress on Rheology, Athens."},"language":[{"iso":"eng"}],"_id":"44102","user_id":"45530","department":[{"_id":"9"},{"_id":"150"}],"status":"public","type":"conference_abstract"},{"title":"Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn","doi":"10.3278/HSL2310W","main_file_link":[{"open_access":"1","url":"https://www.wbv.de/shop/Entwicklung-eines-neuen-Konzeptes-zur-Vermittlung-von-Lerntechniken-und-Selbstlernkompetenzen-fuer-Studierende-des-Maschinenbaus-an-der-Universitaet-Paderborn-HSL2310W"}],"publisher":"wbv Publikation","oa":"1","date_updated":"2025-01-13T09:06:55Z","date_created":"2024-06-06T09:52:30Z","author":[{"first_name":"Leon Alexander","id":"65001","full_name":"Bentrup, Leon Alexander","last_name":"Bentrup"},{"last_name":"Gräßer","full_name":"Gräßer, Melanie ","first_name":"Melanie "},{"last_name":"Temmen","id":"30086","full_name":"Temmen, Katrin","first_name":"Katrin"},{"full_name":"Schmid, Hans-Joachim","id":"464","last_name":"Schmid","orcid":"000-0001-8590-1921","first_name":"Hans-Joachim"}],"year":"2023","citation":{"ama":"Bentrup LA, Gräßer M, Temmen K, Schmid H-J. Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn. <i>die hochschullehre</i>. 2023;(9). doi:<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>","chicago":"Bentrup, Leon Alexander, Melanie  Gräßer, Katrin Temmen, and Hans-Joachim Schmid. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.” <i>die hochschullehre</i>, no. 9 (2023). <a href=\"https://doi.org/10.3278/HSL2310W\">https://doi.org/10.3278/HSL2310W</a>.","ieee":"L. A. Bentrup, M. Gräßer, K. Temmen, and H.-J. Schmid, “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn,” <i>die hochschullehre</i>, no. 9, 2023, doi: <a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>.","short":"L.A. Bentrup, M. Gräßer, K. Temmen, H.-J. Schmid, die hochschullehre (2023).","mla":"Bentrup, Leon Alexander, et al. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.” <i>die hochschullehre</i>, no. 9, wbv Publikation, 2023, doi:<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>.","bibtex":"@article{Bentrup_Gräßer_Temmen_Schmid_2023, title={Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn}, DOI={<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>}, number={9}, journal={die hochschullehre}, publisher={wbv Publikation}, author={Bentrup, Leon Alexander and Gräßer, Melanie  and Temmen, Katrin and Schmid, Hans-Joachim}, year={2023} }","apa":"Bentrup, L. A., Gräßer, M., Temmen, K., &#38; Schmid, H.-J. (2023). Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn. <i>die hochschullehre</i>, <i>9</i>. <a href=\"https://doi.org/10.3278/HSL2310W\">https://doi.org/10.3278/HSL2310W</a>"},"publication_status":"published","issue":"9","language":[{"iso":"ger"}],"_id":"54632","department":[{"_id":"300"},{"_id":"34"},{"_id":"150"},{"_id":"9"}],"user_id":"65001","status":"public","publication":"die hochschullehre","type":"journal_article"},{"type":"conference","status":"public","file":[{"access_level":"closed","file_name":"Extended Abstract_PARTEC.pdf","file_id":"51728","file_size":130920,"date_created":"2024-02-21T16:27:47Z","creator":"jludwig","date_updated":"2024-02-21T16:27:47Z","relation":"main_file","success":1,"content_type":"application/pdf"}],"_id":"51727","department":[{"_id":"9"},{"_id":"150"}],"user_id":"45788","ddc":["660"],"file_date_updated":"2024-02-21T16:27:47Z","language":[{"iso":"eng"}],"has_accepted_license":"1","place":"Düsseldorf","year":"2023","citation":{"chicago":"Beimdiek, Janis, and Hans-Joachim Schmid. “Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System.” Düsseldorf: VDI Verlag, 2023.","ieee":"J. Beimdiek and H.-J. Schmid, “Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system,” presented at the International Congress on Particle Technology | PARTEC 2023, Nürnberg, 2023.","ama":"Beimdiek J, Schmid H-J. Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system. In: VDI Verlag; 2023.","apa":"Beimdiek, J., &#38; Schmid, H.-J. (2023). <i>Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system</i>. International Congress on Particle Technology | PARTEC 2023, Nürnberg.","bibtex":"@inproceedings{Beimdiek_Schmid_2023, place={Düsseldorf}, title={Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system}, publisher={VDI Verlag}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2023} }","mla":"Beimdiek, Janis, and Hans-Joachim Schmid. <i>Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System</i>. VDI Verlag, 2023.","short":"J. Beimdiek, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023."},"date_updated":"2025-09-18T08:53:29Z","publisher":"VDI Verlag","date_created":"2024-02-21T16:28:49Z","author":[{"id":"45788","full_name":"Beimdiek, Janis","last_name":"Beimdiek","orcid":"0009-0001-1348-496X","first_name":"Janis"},{"last_name":"Schmid","orcid":"000-0001-8590-1921","id":"464","full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim"}],"title":"Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system","conference":{"name":"International Congress on Particle Technology | PARTEC 2023","start_date":"2023-09-26","end_date":"2023-09-28","location":"Nürnberg"}},{"_id":"51726","department":[{"_id":"9"},{"_id":"150"}],"user_id":"45788","ddc":["660"],"language":[{"iso":"ger"}],"file_date_updated":"2024-02-21T16:30:16Z","type":"conference_abstract","status":"public","file":[{"relation":"main_file","success":1,"content_type":"application/pdf","file_id":"51729","file_name":"Poster_Gasreinigung.pdf","access_level":"closed","file_size":803920,"creator":"jludwig","date_created":"2024-02-21T16:30:16Z","date_updated":"2024-02-21T16:30:16Z"}],"date_updated":"2025-09-18T08:49:17Z","author":[{"first_name":"Janis","last_name":"Beimdiek","orcid":"0009-0001-1348-496X","full_name":"Beimdiek, Janis","id":"45788"},{"last_name":"Schmid","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"date_created":"2024-02-21T16:18:17Z","title":"Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)","conference":{"start_date":"2023-03-28","name":"Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023","location":"Paderborn","end_date":"2023-03-29"},"has_accepted_license":"1","year":"2023","place":"Paderborn","citation":{"ieee":"J. Beimdiek and H.-J. Schmid, “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster),” presented at the Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn, 2023.","chicago":"Beimdiek, Janis, and Hans-Joachim Schmid. “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster).” Paderborn, 2023.","ama":"Beimdiek J, Schmid H-J. Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster). In: ; 2023.","apa":"Beimdiek, J., &#38; Schmid, H.-J. (2023). <i>Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)</i>. Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn.","short":"J. Beimdiek, H.-J. Schmid, in: Paderborn, 2023.","mla":"Beimdiek, Janis, and Hans-Joachim Schmid. <i>Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)</i>. 2023.","bibtex":"@inproceedings{Beimdiek_Schmid_2023, place={Paderborn}, title={Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2023} }"}},{"publisher":"International Congress of Particle Technology","date_updated":"2025-09-18T10:49:39Z","date_created":"2024-02-05T12:59:39Z","author":[{"first_name":"Orlando","id":"98419","full_name":"Massopo, Orlando","last_name":"Massopo"},{"id":"67002","full_name":"Tischendorf, Ricardo","last_name":"Tischendorf","first_name":"Ricardo"},{"full_name":"Schmid, Hans-Joachim","id":"464","orcid":"000-0001-8590-1921","last_name":"Schmid","first_name":"Hans-Joachim"},{"full_name":"Fröde, Fabian","last_name":"Fröde","first_name":"Fabian"},{"first_name":"Temistocle","last_name":"Grenga","full_name":"Grenga, Temistocle"},{"last_name":"Pitsch","full_name":"Pitsch, Heinz","first_name":"Heinz"},{"last_name":"Bieber","full_name":"Bieber, Malte","first_name":"Malte"},{"full_name":"Reddemann, Manuel","last_name":"Reddemann","first_name":"Manuel"},{"last_name":"Kneer","full_name":"Kneer, Reinhold","first_name":"Reinhold"}],"title":"Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)","conference":{"start_date":"2023-09-26","name":"International Congress of Particle Technology","location":"Nürnberg","end_date":"2023-09-28"},"year":"2023","place":"Nürnberg","citation":{"apa":"Massopo, O., Tischendorf, R., Schmid, H.-J., Fröde, F., Grenga, T., Pitsch, H., Bieber, M., Reddemann, M., &#38; Kneer, R. (2023). <i>Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)</i>. International Congress of Particle Technology, Nürnberg.","short":"O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch, M. Bieber, M. Reddemann, R. Kneer, in: International Congress of Particle Technology, Nürnberg, 2023.","mla":"Massopo, Orlando, et al. <i>Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis (Presentation)</i>. International Congress of Particle Technology, 2023.","bibtex":"@inproceedings{Massopo_Tischendorf_Schmid_Fröde_Grenga_Pitsch_Bieber_Reddemann_Kneer_2023, place={Nürnberg}, title={Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)}, publisher={International Congress of Particle Technology}, author={Massopo, Orlando and Tischendorf, Ricardo and Schmid, Hans-Joachim and Fröde, Fabian and Grenga, Temistocle and Pitsch, Heinz and Bieber, Malte and Reddemann, Manuel and Kneer, Reinhold}, year={2023} }","ama":"Massopo O, Tischendorf R, Schmid H-J, et al. Influence of atomization on the particle formation in spray flame pyrolysis (Presentation). In: International Congress of Particle Technology; 2023.","chicago":"Massopo, Orlando, Ricardo Tischendorf, Hans-Joachim Schmid, Fabian Fröde, Temistocle Grenga, Heinz Pitsch, Malte Bieber, Manuel Reddemann, and Reinhold Kneer. “Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis (Presentation).” Nürnberg: International Congress of Particle Technology, 2023.","ieee":"O. Massopo <i>et al.</i>, “Influence of atomization on the particle formation in spray flame pyrolysis (Presentation),” presented at the International Congress of Particle Technology, Nürnberg, 2023."},"_id":"51147","user_id":"98419","department":[{"_id":"150"}],"keyword":["Flame Stability","Particle Sample Extraction","SMPS","Impurities"],"language":[{"iso":"eng"}],"type":"conference_abstract","status":"public"},{"date_updated":"2025-09-18T11:16:36Z","publisher":"Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik","author":[{"first_name":"Orlando","last_name":"Massopo","id":"98419","full_name":"Massopo, Orlando"},{"id":"67002","full_name":"Tischendorf, Ricardo","last_name":"Tischendorf","first_name":"Ricardo"},{"first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464"},{"first_name":"Fabian","full_name":"Fröde, Fabian","last_name":"Fröde"},{"last_name":"Pitsch","full_name":"Pitsch, Heinz","first_name":"Heinz"},{"last_name":"Reddemann","full_name":"Reddemann, Manuel","first_name":"Manuel"},{"full_name":"Grenga, Temistocle","last_name":"Grenga","first_name":"Temistocle"},{"first_name":"Reinhold","last_name":"Kneer","full_name":"Kneer, Reinhold"}],"date_created":"2024-02-05T12:37:04Z","title":"Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)","conference":{"location":"Paderborn","end_date":"2023-03-30","start_date":"2023-03-28","name":"Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik"},"place":"Paderborn","year":"2023","citation":{"ieee":"O. Massopo <i>et al.</i>, “Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag),” presented at the Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.","chicago":"Massopo, Orlando, Ricardo Tischendorf, Hans-Joachim Schmid, Fabian Fröde, Heinz Pitsch, Manuel Reddemann, Temistocle Grenga, and Reinhold Kneer. “Einfluss Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag).” Paderborn: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, 2023.","ama":"Massopo O, Tischendorf R, Schmid H-J, et al. Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag). In: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik; 2023.","short":"O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann, T. Grenga, R. Kneer, in: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.","bibtex":"@inproceedings{Massopo_Tischendorf_Schmid_Fröde_Pitsch_Reddemann_Grenga_Kneer_2023, place={Paderborn}, title={Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)}, publisher={Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik}, author={Massopo, Orlando and Tischendorf, Ricardo and Schmid, Hans-Joachim and Fröde, Fabian and Pitsch, Heinz and Reddemann, Manuel and Grenga, Temistocle and Kneer, Reinhold}, year={2023} }","mla":"Massopo, Orlando, et al. <i>Einfluss Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag)</i>. Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, 2023.","apa":"Massopo, O., Tischendorf, R., Schmid, H.-J., Fröde, F., Pitsch, H., Reddemann, M., Grenga, T., &#38; Kneer, R. (2023). <i>Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)</i>. Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn."},"_id":"51142","department":[{"_id":"150"}],"user_id":"98419","keyword":["SpraySyn","Flammenspraypyrolyse","Maghemite Nanopartikel","Gas to particle-Syntheseweg","Probennahme","Verunreinigung"],"language":[{"iso":"eng"}],"type":"conference_abstract","status":"public"},{"_id":"30220","user_id":"50769","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"type":"conference","status":"public","date_updated":"2024-01-17T07:30:39Z","oa":"1","author":[{"first_name":"Ivo","id":"50769","full_name":"Kletetzka, Ivo","last_name":"Kletetzka"},{"first_name":"Roland","full_name":"Gawlikowicz, Roland","last_name":"Gawlikowicz"},{"last_name":"Schmid","orcid":"000-0001-8590-1921","id":"464","full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim"}],"volume":33,"main_file_link":[{"open_access":"1","url":"https://utw10945.utweb.utexas.edu/sites/default/files/2022/Effects%20of%20Spherical%20Fillers%20on%20the%20Processability.pdf"}],"doi":"http://dx.doi.org/10.26153/tsw/44558","conference":{"start_date":"2022-07-25","name":"2022 Annual International Solid Freeform Fabrication Symposium","location":"Austin","end_date":"2022-07-27"},"publication_status":"published","place":"Austin","citation":{"ama":"Kletetzka I, Gawlikowicz R, Schmid H-J. Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends. In: <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>. Vol 33. Laboratory for Freeform Fabrication and University of Texas; 2022. doi:<a href=\"http://dx.doi.org/10.26153/tsw/44558\">http://dx.doi.org/10.26153/tsw/44558</a>","chicago":"Kletetzka, Ivo, Roland Gawlikowicz, and Hans-Joachim Schmid. “Effects of Spherical Fillers on the Processability and Mechanical Properties of PA613 and PP-Based LS Dry Blends.” In <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022. <a href=\"http://dx.doi.org/10.26153/tsw/44558\">http://dx.doi.org/10.26153/tsw/44558</a>.","ieee":"I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>, Austin, 2022, vol. 33, doi: <a href=\"http://dx.doi.org/10.26153/tsw/44558\">http://dx.doi.org/10.26153/tsw/44558</a>.","apa":"Kletetzka, I., Gawlikowicz, R., &#38; Schmid, H.-J. (2022). Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends. <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>, <i>33</i>. <a href=\"http://dx.doi.org/10.26153/tsw/44558\">http://dx.doi.org/10.26153/tsw/44558</a>","mla":"Kletetzka, Ivo, et al. “Effects of Spherical Fillers on the Processability and Mechanical Properties of PA613 and PP-Based LS Dry Blends.” <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:<a href=\"http://dx.doi.org/10.26153/tsw/44558\">http://dx.doi.org/10.26153/tsw/44558</a>.","bibtex":"@inproceedings{Kletetzka_Gawlikowicz_Schmid_2022, place={Austin}, title={Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends}, volume={33}, DOI={<a href=\"http://dx.doi.org/10.26153/tsw/44558\">http://dx.doi.org/10.26153/tsw/44558</a>}, booktitle={Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium}, publisher={Laboratory for Freeform Fabrication and University of Texas}, author={Kletetzka, Ivo and Gawlikowicz, Roland and Schmid, Hans-Joachim}, year={2022} }","short":"I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022."},"intvolume":"        33","language":[{"iso":"eng"}],"publication":"Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium","abstract":[{"text":"In this work, the influences of spherical fillers on the processing properties and the resulting mechanical properties of laser sintered components are investigated. For this purpose, micro glass spheres, hollow glass bubbles and mineral spheres are dry blended to the matrix polymers polyamide 613 and polypropylene with a filling ratio of 20 and 40 vol%. First, relevant properties of the blends, such as powder flowability, thermal behavior and melt viscosity, are investigated. Based on the results, processing parameters are then developed for the LS process and the mechanical properties of the components are investigated. The aim is to be able to tailor the mechanical properties of LS components by adding fillers and thus to create new application areas for additively manufactured components. ","lang":"eng"}],"publisher":"Laboratory for Freeform Fabrication and University of Texas","date_created":"2022-03-10T08:05:46Z","title":"Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends","quality_controlled":"1","year":"2022"},{"year":"2022","quality_controlled":"1","title":"Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder","publisher":"Laboratory for Freeform Fabrication and University of Texas","date_created":"2022-08-17T11:11:01Z","publication":"Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium","language":[{"iso":"eng"}],"place":"Austin","citation":{"apa":"Kletetzka, I., Klippstein, S. H., &#38; Schmid, H.-J. (2022). Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder. <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>, <i>33</i>. <a href=\"http://dx.doi.org/10.26153/tsw/44555\">http://dx.doi.org/10.26153/tsw/44555</a>","short":"I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.","bibtex":"@inproceedings{Kletetzka_Klippstein_Schmid_2022, place={Austin}, title={Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder}, volume={33}, DOI={<a href=\"http://dx.doi.org/10.26153/tsw/44555\">http://dx.doi.org/10.26153/tsw/44555</a>}, booktitle={Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium}, publisher={Laboratory for Freeform Fabrication and University of Texas}, author={Kletetzka, Ivo and Klippstein, Sven Helge and Schmid, Hans-Joachim}, year={2022} }","mla":"Kletetzka, Ivo, et al. “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder.” <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:<a href=\"http://dx.doi.org/10.26153/tsw/44555\">http://dx.doi.org/10.26153/tsw/44555</a>.","chicago":"Kletetzka, Ivo, Sven Helge Klippstein, and Hans-Joachim Schmid. “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder.” In <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022. <a href=\"http://dx.doi.org/10.26153/tsw/44555\">http://dx.doi.org/10.26153/tsw/44555</a>.","ieee":"I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>, Austin, 2022, vol. 33, doi: <a href=\"http://dx.doi.org/10.26153/tsw/44555\">http://dx.doi.org/10.26153/tsw/44555</a>.","ama":"Kletetzka I, Klippstein SH, Schmid H-J. Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder. In: <i>Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium</i>. Vol 33. Laboratory for Freeform Fabrication and University of Texas; 2022. doi:<a href=\"http://dx.doi.org/10.26153/tsw/44555\">http://dx.doi.org/10.26153/tsw/44555</a>"},"intvolume":"        33","publication_status":"published","main_file_link":[{"url":"https://utw10945.utweb.utexas.edu/sites/default/files/2022/Shelf%20Life%20of%20Polyamide%2012%20%28PA2200%29%20Laser%20Sinterin.pdf","open_access":"1"}],"doi":"http://dx.doi.org/10.26153/tsw/44555","conference":{"end_date":"2022-07-27","location":"Austin","name":"2022 annual international Solid Freeform Fabrication Symposium","start_date":"2022-07-25"},"oa":"1","date_updated":"2024-01-17T07:29:41Z","author":[{"first_name":"Ivo","last_name":"Kletetzka","id":"50769","full_name":"Kletetzka, Ivo"},{"id":"71545","full_name":"Klippstein, Sven Helge","last_name":"Klippstein","first_name":"Sven Helge"},{"first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464","full_name":"Schmid, Hans-Joachim"}],"volume":33,"status":"public","type":"conference","_id":"32874","user_id":"50769","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}]},{"year":"2022","citation":{"apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2022). Model droplet formation in extensional filament stretching within a Filament Extension Atomizer. <i>Rheologica Acta</i>. <a href=\"https://doi.org/10.1007/s00397-022-01339-y\">https://doi.org/10.1007/s00397-022-01339-y</a>","mla":"Neukötter, Moritz, et al. “Model Droplet Formation in Extensional Filament Stretching within a Filament Extension Atomizer.” <i>Rheologica Acta</i>, Springer Science and Business Media LLC, 2022, doi:<a href=\"https://doi.org/10.1007/s00397-022-01339-y\">10.1007/s00397-022-01339-y</a>.","bibtex":"@article{Neukötter_Jesinghausen_Schmid_2022, title={Model droplet formation in extensional filament stretching within a Filament Extension Atomizer}, DOI={<a href=\"https://doi.org/10.1007/s00397-022-01339-y\">10.1007/s00397-022-01339-y</a>}, journal={Rheologica Acta}, publisher={Springer Science and Business Media LLC}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Model droplet formation in extensional filament stretching within a Filament Extension Atomizer,” <i>Rheologica Acta</i>, 2022, doi: <a href=\"https://doi.org/10.1007/s00397-022-01339-y\">10.1007/s00397-022-01339-y</a>.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Model Droplet Formation in Extensional Filament Stretching within a Filament Extension Atomizer.” <i>Rheologica Acta</i>, 2022. <a href=\"https://doi.org/10.1007/s00397-022-01339-y\">https://doi.org/10.1007/s00397-022-01339-y</a>.","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Model droplet formation in extensional filament stretching within a Filament Extension Atomizer. <i>Rheologica Acta</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1007/s00397-022-01339-y\">10.1007/s00397-022-01339-y</a>"},"quality_controlled":"1","publication_identifier":{"issn":["0035-4511","1435-1528"]},"publication_status":"published","title":"Model droplet formation in extensional filament stretching within a Filament Extension Atomizer","doi":"10.1007/s00397-022-01339-y","main_file_link":[{"open_access":"1","url":"https://link.springer.com/article/10.1007/s00397-022-01339-y"}],"oa":"1","date_updated":"2023-01-17T07:35:20Z","publisher":"Springer Science and Business Media LLC","date_created":"2022-05-03T08:12:21Z","author":[{"first_name":"Moritz","last_name":"Neukötter","orcid":"0000-0001-9101-8828","id":"45530","full_name":"Neukötter, Moritz"},{"id":"3959","full_name":"Jesinghausen, Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","first_name":"Steffen"},{"last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Further innovation in the field of selective laser sintering (SLS) is strongly connected to the availability of new materials since the market is dominated by polyamide 12 (&gt;90%). The aim of this publication is to develop a descriptive model for the droplet formation process in a Filament Extension Atomizer to predict the applicability to exploit further polymers for the SLS process. The feasibility was tested, investigated and characterized using a “Dripping out of a nozzle” setup for uniaxial extension. The droplet formation process was then observed via high-speed camera imaging and classified for certain parameters. The experiments were carried out using semi-diluted polyethylene oxide (600–4000 kg/mol), glycerol and water solutions as model fluids. Driven by the Plateau-Rayleigh instability, different types of spherical droplets were observed and various droplet formation mechanisms demonstrated and analyzed. Based on the experimental results, a predictive model is derived to describe various essential parameters.</jats:p>"}],"status":"public","publication":"Rheologica Acta","type":"journal_article","keyword":["Rheology","SLS","Lasersintering","exensional rheology"],"article_type":"original","language":[{"iso":"eng"}],"_id":"31035","department":[{"_id":"150"}],"user_id":"3959"},{"date_updated":"2023-03-14T08:26:40Z","author":[{"first_name":"Janis","full_name":"Beimdiek, Janis","id":"45788","last_name":"Beimdiek"},{"first_name":"Hans-Joachim","full_name":"Schmid, Hans-Joachim","id":"464","last_name":"Schmid","orcid":"000-0001-8590-1921"}],"date_created":"2023-01-18T14:42:17Z","title":"A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster)","conference":{"start_date":"2022-06-08","name":"1st International Workshop on Reacting Particle-Gas Systems","location":"Bochum","end_date":"2022-06-09"},"has_accepted_license":"1","year":"2022","citation":{"chicago":"Beimdiek, Janis, and Hans-Joachim Schmid. “A Combined Flue Gas Cleaning System with a Novel Entrained Flow SCR Using an Online Synthesized Catalyst (Poster),” 2022.","ieee":"J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster),” presented at the 1st International Workshop on Reacting Particle-Gas Systems, Bochum, 2022.","ama":"Beimdiek J, Schmid H-J. A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster). In: ; 2022.","mla":"Beimdiek, Janis, and Hans-Joachim Schmid. <i>A Combined Flue Gas Cleaning System with a Novel Entrained Flow SCR Using an Online Synthesized Catalyst (Poster)</i>. 2022.","bibtex":"@inproceedings{Beimdiek_Schmid_2022, title={A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster)}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2022} }","short":"J. Beimdiek, H.-J. Schmid, in: 2022.","apa":"Beimdiek, J., &#38; Schmid, H.-J. (2022). <i>A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster)</i>. 1st International Workshop on Reacting Particle-Gas Systems, Bochum."},"_id":"37424","user_id":"45788","department":[{"_id":"150"},{"_id":"9"}],"ddc":["660"],"keyword":["clean air","harmful gas removal","denitrification","SCR","catalytic filtration","nanoparticles","flame-synthesis"],"language":[{"iso":"eng"}],"file_date_updated":"2023-01-18T14:41:47Z","type":"conference_abstract","file":[{"relation":"main_file","success":1,"content_type":"application/pdf","file_id":"37425","access_level":"closed","file_name":"Abstract_Particle_Gas.pdf","file_size":130697,"date_created":"2023-01-18T14:41:47Z","creator":"jludwig","date_updated":"2023-01-18T14:41:47Z"}],"status":"public"},{"language":[{"iso":"ger"}],"department":[{"_id":"150"},{"_id":"219"},{"_id":"9"}],"user_id":"38188","_id":"35729","status":"public","publication":"Werkstoffe","type":"journal_article","main_file_link":[{"url":"https://werkstoffzeitschrift.de/innovative-werkstoffherstellung-fuer-das-polymer-laser-sintern-teil-2/"}],"title":"Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2","volume":6,"author":[{"id":"38188","full_name":"Rüther, Moritz Johannes","last_name":"Rüther","first_name":"Moritz Johannes"},{"first_name":"Sven Helge","full_name":"Klippstein, Sven Helge","id":"71545","last_name":"Klippstein"},{"id":"77383","full_name":"Ponusamy, SathishKumar","last_name":"Ponusamy","first_name":"SathishKumar"},{"first_name":"Steffen","id":"3959","full_name":"Jesinghausen, Steffen","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298"},{"full_name":"Schmid, Hans-Joachim","id":"464","orcid":"000-0001-8590-1921","last_name":"Schmid","first_name":"Hans-Joachim"}],"date_created":"2023-01-10T09:56:40Z","publisher":"HW-Verlag","date_updated":"2023-03-14T08:25:09Z","intvolume":"         6","page":"18 - 19","citation":{"ama":"Rüther MJ, Klippstein SH, Ponusamy S, Jesinghausen S, Schmid H-J. Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2. <i>Werkstoffe</i>. 2022;6:18-19.","ieee":"M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” <i>Werkstoffe</i>, vol. 6, pp. 18–19, 2022.","chicago":"Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Steffen Jesinghausen, and Hans-Joachim Schmid. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2.” <i>Werkstoffe</i> 6 (2022): 18–19.","bibtex":"@article{Rüther_Klippstein_Ponusamy_Jesinghausen_Schmid_2022, title={Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2}, volume={6}, journal={Werkstoffe}, publisher={HW-Verlag}, author={Rüther, Moritz Johannes and Klippstein, Sven Helge and Ponusamy, SathishKumar and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022}, pages={18–19} }","mla":"Rüther, Moritz Johannes, et al. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2.” <i>Werkstoffe</i>, vol. 6, HW-Verlag, 2022, pp. 18–19.","short":"M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.","apa":"Rüther, M. J., Klippstein, S. H., Ponusamy, S., Jesinghausen, S., &#38; Schmid, H.-J. (2022). Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2. <i>Werkstoffe</i>, <i>6</i>, 18–19."},"year":"2022","publication_status":"published"},{"year":"2022","page":"28-29","intvolume":"         5","citation":{"ama":"Rüther MJ, Klippstein SH, Ponusamy S, Jesinghausen S, Schmid H-J. Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1. <i>Werkstoffe</i>. 2022;5:28-29.","ieee":"M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” <i>Werkstoffe</i>, vol. 5, pp. 28–29, 2022.","chicago":"Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Steffen Jesinghausen, and Hans-Joachim Schmid. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1.” <i>Werkstoffe</i> 5 (2022): 28–29.","mla":"Rüther, Moritz Johannes, et al. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1.” <i>Werkstoffe</i>, vol. 5, HW-Verlag, 2022, pp. 28–29.","short":"M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.","bibtex":"@article{Rüther_Klippstein_Ponusamy_Jesinghausen_Schmid_2022, title={Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1}, volume={5}, journal={Werkstoffe}, publisher={HW-Verlag}, author={Rüther, Moritz Johannes and Klippstein, Sven Helge and Ponusamy, SathishKumar and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022}, pages={28–29} }","apa":"Rüther, M. J., Klippstein, S. H., Ponusamy, S., Jesinghausen, S., &#38; Schmid, H.-J. (2022). Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1. <i>Werkstoffe</i>, <i>5</i>, 28–29."},"publication_status":"published","title":"Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1","main_file_link":[{"url":"https://werkstoffzeitschrift.de/innovative-werkstoffherstellung-fuer-das-polymer-laser-sintern-teil-1/"}],"publisher":"HW-Verlag","date_updated":"2023-03-14T08:25:41Z","volume":5,"date_created":"2023-01-10T09:54:59Z","author":[{"first_name":"Moritz Johannes","id":"38188","full_name":"Rüther, Moritz Johannes","last_name":"Rüther"},{"first_name":"Sven Helge","full_name":"Klippstein, Sven Helge","id":"71545","last_name":"Klippstein"},{"first_name":"SathishKumar","id":"77383","full_name":"Ponusamy, SathishKumar","last_name":"Ponusamy"},{"first_name":"Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","full_name":"Jesinghausen, Steffen","id":"3959"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"status":"public","publication":"Werkstoffe","type":"journal_article","language":[{"iso":"ger"}],"_id":"35724","department":[{"_id":"150"},{"_id":"219"},{"_id":"9"}],"user_id":"38188"},{"date_created":"2023-01-18T15:10:06Z","author":[{"first_name":"Janis","id":"45788","full_name":"Beimdiek, Janis","last_name":"Beimdiek"},{"first_name":"Hans-Joachim","full_name":"Schmid, Hans-Joachim","id":"464","last_name":"Schmid","orcid":"000-0001-8590-1921"}],"date_updated":"2023-03-14T08:28:49Z","conference":{"end_date":"2022-10-09","location":"San Diego","name":"13th World Filtration Congress","start_date":"2022-10-05"},"title":"Novel entrained flow SCR using online synthesized catalyst particles (Poster)","has_accepted_license":"1","citation":{"ieee":"J. Beimdiek and H.-J. Schmid, “Novel entrained flow SCR using online synthesized catalyst particles (Poster),” presented at the 13th World Filtration Congress, San Diego, 2022.","chicago":"Beimdiek, Janis, and Hans-Joachim Schmid. “Novel Entrained Flow SCR Using Online Synthesized Catalyst Particles (Poster),” 2022.","ama":"Beimdiek J, Schmid H-J. Novel entrained flow SCR using online synthesized catalyst particles (Poster). In: ; 2022.","apa":"Beimdiek, J., &#38; Schmid, H.-J. (2022). <i>Novel entrained flow SCR using online synthesized catalyst particles (Poster)</i>. 13th World Filtration Congress, San Diego.","bibtex":"@inproceedings{Beimdiek_Schmid_2022, title={Novel entrained flow SCR using online synthesized catalyst particles (Poster)}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2022} }","mla":"Beimdiek, Janis, and Hans-Joachim Schmid. <i>Novel Entrained Flow SCR Using Online Synthesized Catalyst Particles (Poster)</i>. 2022.","short":"J. Beimdiek, H.-J. Schmid, in: 2022."},"year":"2022","department":[{"_id":"150"},{"_id":"9"}],"user_id":"45788","_id":"37432","language":[{"iso":"eng"}],"file_date_updated":"2023-02-01T09:25:32Z","keyword":["clean air","harmful gas removal","denitrification","SCR","catalytic filtration","nanoparticles","flame-synthesis"],"ddc":["660"],"type":"conference_abstract","status":"public","file":[{"date_created":"2023-02-01T09:25:32Z","creator":"jludwig","date_updated":"2023-02-01T09:25:32Z","access_level":"closed","file_name":"Abstract_Poster_WFC2022.pdf","file_id":"41352","file_size":98157,"content_type":"application/pdf","relation":"main_file","success":1}]},{"conference":{"location":"Digital","end_date":"2022-05-04","start_date":"2022-05-03","name":"Joint Online Symposium on Rheology"},"title":"Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation)","author":[{"first_name":"Moritz","full_name":"Neukötter, Moritz","id":"45530","last_name":"Neukötter","orcid":"0000-0001-9101-8828"},{"full_name":"Jesinghausen, Steffen","id":"3959","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298","first_name":"Steffen"},{"last_name":"Schmid","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"date_created":"2023-01-31T11:53:59Z","date_updated":"2023-03-14T08:31:13Z","citation":{"mla":"Neukötter, Moritz, et al. <i>Triggering Instabilities of Polymer Solution Suspensions under Uniaxial Extension  (Presentation)</i>. 2022.","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2022, title={Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation)}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2022). <i>Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation)</i>. Joint Online Symposium on Rheology, Digital.","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation). In: ; 2022.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation),” presented at the Joint Online Symposium on Rheology, Digital, 2022.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Triggering Instabilities of Polymer Solution Suspensions under Uniaxial Extension  (Presentation),” 2022."},"year":"2022","has_accepted_license":"1","file_date_updated":"2023-03-14T08:15:20Z","language":[{"iso":"eng"}],"ddc":["660"],"user_id":"45530","department":[{"_id":"150"},{"_id":"9"}],"_id":"41160","file":[{"relation":"main_file","success":1,"content_type":"application/pdf","access_level":"closed","file_id":"42976","file_name":"Abstract_Neukoetter_DRG_Symposium.pdf","file_size":111996,"date_created":"2023-03-14T08:15:20Z","creator":"moritzne","date_updated":"2023-03-14T08:15:20Z"}],"status":"public","type":"conference_abstract"},{"_id":"41158","department":[{"_id":"150"},{"_id":"9"}],"user_id":"45530","ddc":["660"],"file_date_updated":"2023-03-14T08:17:53Z","language":[{"iso":"eng"}],"type":"conference_abstract","status":"public","file":[{"date_updated":"2023-03-14T08:17:53Z","creator":"moritzne","date_created":"2023-03-14T08:17:53Z","file_size":52172,"file_name":"Abstract_AERC_2022.pdf","file_id":"42977","access_level":"closed","content_type":"application/pdf","success":1,"relation":"main_file"}],"date_updated":"2023-03-14T08:30:42Z","author":[{"first_name":"Moritz","id":"45530","full_name":"Neukötter, Moritz","last_name":"Neukötter","orcid":"0000-0001-9101-8828"},{"full_name":"Jesinghausen, Steffen","id":"3959","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298","first_name":"Steffen"},{"first_name":"Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim","id":"464"}],"date_created":"2023-01-31T11:51:15Z","title":"Instability analysis of suspensions with a polymer solution matrix (Presentation)","conference":{"start_date":"2022-04-25","name":"Annual European Rheology Conference","location":"Sevilla","end_date":"2022-04-28"},"has_accepted_license":"1","year":"2022","citation":{"ama":"Neukötter M, Jesinghausen S, Schmid H-J. Instability analysis of suspensions with a polymer solution matrix (Presentation). In: ; 2022.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Instability Analysis of Suspensions with a Polymer Solution Matrix (Presentation),” 2022.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instability analysis of suspensions with a polymer solution matrix (Presentation),” presented at the Annual European Rheology Conference, Sevilla, 2022.","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2022). <i>Instability analysis of suspensions with a polymer solution matrix (Presentation)</i>. Annual European Rheology Conference, Sevilla.","mla":"Neukötter, Moritz, et al. <i>Instability Analysis of Suspensions with a Polymer Solution Matrix (Presentation)</i>. 2022.","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2022, title={Instability analysis of suspensions with a polymer solution matrix (Presentation)}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }"}},{"citation":{"bibtex":"@inproceedings{Rüther_Klippstein_Schmid_2022, title={Flowability of polymer powders at elevated temperatures for additive manufacturing}, author={Rüther, Moritz Johannes and Klippstein, Sven Helge and Schmid, Hans-Joachim}, editor={Rüther, Moritz Johannes and Klippstein, Sven Helge and Schmid, Hans-Joachim}, year={2022} }","mla":"Rüther, Moritz Johannes, et al. <i>Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing</i>. Edited by Moritz Johannes Rüther et al., 2022.","short":"M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.","apa":"Rüther, M. J., Klippstein, S. H., &#38; Schmid, H.-J. (2022). <i>Flowability of polymer powders at elevated temperatures for additive manufacturing</i> (M. J. Rüther, S. H. Klippstein, &#38; H.-J. Schmid, Eds.).","ama":"Rüther MJ, Klippstein SH, Schmid H-J. Flowability of polymer powders at elevated temperatures for additive manufacturing. In: Rüther MJ, Klippstein SH, Schmid H-J, eds. ; 2022.","ieee":"M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Madrid, 2022.","chicago":"Rüther, Moritz Johannes, Sven Helge Klippstein, and Hans-Joachim Schmid. “Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.” edited by Moritz Johannes Rüther, Sven Helge Klippstein, and Hans-Joachim Schmid, 2022."},"year":"2022","date_created":"2022-10-11T14:08:25Z","author":[{"first_name":"Moritz Johannes","id":"38188","full_name":"Rüther, Moritz Johannes","last_name":"Rüther"},{"full_name":"Klippstein, Sven Helge","id":"71545","last_name":"Klippstein","first_name":"Sven Helge"},{"first_name":"Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","id":"464","full_name":"Schmid, Hans-Joachim"}],"date_updated":"2023-03-27T19:56:10Z","conference":{"end_date":"2022.09.22","location":"Madrid","name":"9th Congress on Particle Technology","start_date":"2022.09.18"},"title":"Flowability of polymer powders at elevated temperatures for additive manufacturing","type":"conference_abstract","status":"public","editor":[{"full_name":"Rüther, Moritz Johannes","last_name":"Rüther","first_name":"Moritz Johannes"},{"last_name":"Klippstein","full_name":"Klippstein, Sven Helge","first_name":"Sven Helge"},{"first_name":"Hans-Joachim","full_name":"Schmid, Hans-Joachim","last_name":"Schmid"}],"user_id":"71545","department":[{"_id":"150"}],"_id":"33695","language":[{"iso":"eng"}]},{"has_accepted_license":"1","year":"2022","citation":{"short":"T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.","mla":"Rüther, Torben, et al. <i>A Novel Correction Method for the Shear Rate in a Couette Rheometer (Vortrag)</i>. 2022.","bibtex":"@inproceedings{Rüther_Jesinghausen_Schmid_2022, title={A novel correction method for the shear rate in a couette rheometer (Vortrag)}, author={Rüther, Torben and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }","apa":"Rüther, T., Jesinghausen, S., &#38; Schmid, H.-J. (2022). <i>A novel correction method for the shear rate in a couette rheometer (Vortrag)</i>. AERC , Sevilla.","chicago":"Rüther, Torben, Steffen Jesinghausen, and Hans-Joachim Schmid. “A Novel Correction Method for the Shear Rate in a Couette Rheometer (Vortrag),” 2022.","ieee":"T. Rüther, S. Jesinghausen, and H.-J. Schmid, “A novel correction method for the shear rate in a couette rheometer (Vortrag),” presented at the AERC , Sevilla, 2022.","ama":"Rüther T, Jesinghausen S, Schmid H-J. A novel correction method for the shear rate in a couette rheometer (Vortrag). In: ; 2022."},"date_updated":"2023-03-31T08:45:25Z","date_created":"2023-03-31T08:45:20Z","author":[{"first_name":"Torben","last_name":"Rüther","full_name":"Rüther, Torben","id":"76950"},{"first_name":"Steffen","id":"3959","full_name":"Jesinghausen, Steffen","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298"},{"first_name":"Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","id":"464","full_name":"Schmid, Hans-Joachim"}],"title":"A novel correction method for the shear rate in a couette rheometer (Vortrag)","conference":{"name":"AERC ","start_date":"2022-04-26","end_date":"2022-04-28","location":"Sevilla"},"type":"conference_abstract","file":[{"date_created":"2023-03-31T08:43:57Z","creator":"torue","date_updated":"2023-03-31T08:43:57Z","file_name":"A_novel_method_for_determining_the_true_shear_rate_in_a_couette_rheometer.docx","file_id":"43239","access_level":"closed","file_size":17099,"content_type":"application/vnd.openxmlformats-officedocument.wordprocessingml.document","relation":"main_file","success":1}],"status":"public","_id":"43238","user_id":"76950","department":[{"_id":"150"},{"_id":"9"}],"ddc":["660"],"keyword":["Couette","Rheology","Correction"],"language":[{"iso":"eng"}],"file_date_updated":"2023-03-31T08:43:57Z"},{"type":"conference_abstract","file":[{"file_size":283757,"file_id":"43244","file_name":"A measurement principle for the determination of multidimensional particle properties using a CDMA.docx","access_level":"closed","date_updated":"2023-03-31T09:12:43Z","creator":"torue","date_created":"2023-03-31T09:12:43Z","success":1,"relation":"main_file","content_type":"application/vnd.openxmlformats-officedocument.wordprocessingml.document"}],"status":"public","_id":"43243","user_id":"76950","department":[{"_id":"150"},{"_id":"9"}],"ddc":["660"],"language":[{"iso":"eng"}],"file_date_updated":"2023-03-31T09:12:43Z","has_accepted_license":"1","year":"2022","citation":{"chicago":"Rüther, Torben, and Hans-Joachim Schmid. “Multidimensional Particle Characterization: Centrifugal Differential Mobility Analyzer (Poster),” 2022.","ieee":"T. Rüther and H.-J. Schmid, “Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster),” presented at the World Congress on Particle Technology 2022, Madrid, 2022.","ama":"Rüther T, Schmid H-J. Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster). In: ; 2022.","apa":"Rüther, T., &#38; Schmid, H.-J. (2022). <i>Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster)</i>. World Congress on Particle Technology 2022, Madrid.","mla":"Rüther, Torben, and Hans-Joachim Schmid. <i>Multidimensional Particle Characterization: Centrifugal Differential Mobility Analyzer (Poster)</i>. 2022.","bibtex":"@inproceedings{Rüther_Schmid_2022, title={Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster)}, author={Rüther, Torben and Schmid, Hans-Joachim}, year={2022} }","short":"T. Rüther, H.-J. Schmid, in: 2022."},"date_updated":"2023-03-31T09:12:53Z","author":[{"last_name":"Rüther","id":"76950","full_name":"Rüther, Torben","first_name":"Torben"},{"first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464","full_name":"Schmid, Hans-Joachim"}],"date_created":"2023-03-31T09:12:51Z","title":"Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster)","conference":{"name":"World Congress on Particle Technology 2022","start_date":"2022-09-18","end_date":"2022-09-21","location":"Madrid"}},{"has_accepted_license":"1","citation":{"chicago":"Rüther, Torben, Steffen Jesinghausen, and Hans-Joachim Schmid. “NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag),” 2022.","ieee":"T. Rüther, S. Jesinghausen, and H.-J. Schmid, “NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag),” presented at the Joint Online Symposium on Rheology 2022, 2022.","ama":"Rüther T, Jesinghausen S, Schmid H-J. NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag). In: ; 2022.","apa":"Rüther, T., Jesinghausen, S., &#38; Schmid, H.-J. (2022). <i>NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)</i>. Joint Online Symposium on Rheology 2022.","short":"T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.","mla":"Rüther, Torben, et al. <i>NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)</i>. 2022.","bibtex":"@inproceedings{Rüther_Jesinghausen_Schmid_2022, title={NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)}, author={Rüther, Torben and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }"},"year":"2022","author":[{"id":"76950","full_name":"Rüther, Torben","last_name":"Rüther","first_name":"Torben"},{"id":"3959","full_name":"Jesinghausen, Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","first_name":"Steffen"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"date_created":"2023-03-31T08:51:33Z","date_updated":"2023-03-31T08:54:36Z","conference":{"name":"Joint Online Symposium on Rheology 2022"},"title":"NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)","type":"conference_abstract","file":[{"content_type":"application/vnd.openxmlformats-officedocument.wordprocessingml.document","success":1,"relation":"main_file","date_updated":"2023-03-31T08:53:55Z","date_created":"2023-03-31T08:53:55Z","creator":"torue","file_size":67981,"file_id":"43242","file_name":"Rheology_Abstract.docx","access_level":"closed"}],"status":"public","user_id":"76950","department":[{"_id":"150"},{"_id":"9"}],"_id":"43240","language":[{"iso":"eng"}],"file_date_updated":"2023-03-31T08:53:55Z","ddc":["660"]},{"doi":"https://doi.org/10.1007/s11837-021-05042-w ","conference":{"end_date":"04.08.2021","location":"Online","name":"Solid Freeform Fabrication 2021","start_date":"02.08.2021"},"volume":74,"author":[{"last_name":"Klippstein","id":"71545","full_name":"Klippstein, Sven Helge","first_name":"Sven Helge"},{"first_name":"Florian","last_name":"Heiny","id":"14053","full_name":"Heiny, Florian"},{"first_name":"Nagaraju","last_name":"Pashikanti,","full_name":"Pashikanti,, Nagaraju"},{"first_name":"Monika","last_name":"Gessler","full_name":"Gessler, Monika"},{"last_name":"Schmid","orcid":"000-0001-8590-1921","id":"464","full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim"}],"date_updated":"2023-05-04T08:32:55Z","page":"1149–1157","intvolume":"        74","citation":{"ieee":"S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” <i>JOM - The Journal of The Minerals, Metals &#38; Materials Society (TMS)</i>, vol. 74, pp. 1149–1157, 2022, doi: <a href=\"https://doi.org/10.1007/s11837-021-05042-w \">https://doi.org/10.1007/s11837-021-05042-w </a>.","chicago":"Klippstein, Sven Helge, Florian Heiny, Nagaraju Pashikanti, Monika Gessler, and Hans-Joachim Schmid. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.” <i>JOM - The Journal of The Minerals, Metals &#38; Materials Society (TMS)</i> 74 (2022): 1149–1157. <a href=\"https://doi.org/10.1007/s11837-021-05042-w \">https://doi.org/10.1007/s11837-021-05042-w </a>.","ama":"Klippstein SH, Heiny F, Pashikanti, N, Gessler M, Schmid H-J. Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties. <i>JOM - The Journal of The Minerals, Metals &#38; Materials Society (TMS)</i>. 2022;74:1149–1157. doi:<a href=\"https://doi.org/10.1007/s11837-021-05042-w \">https://doi.org/10.1007/s11837-021-05042-w </a>","short":"S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals &#38; Materials Society (TMS) 74 (2022) 1149–1157.","bibtex":"@article{Klippstein_Heiny_Pashikanti,_Gessler_Schmid_2022, title={Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties}, volume={74}, DOI={<a href=\"https://doi.org/10.1007/s11837-021-05042-w \">https://doi.org/10.1007/s11837-021-05042-w </a>}, journal={JOM - The Journal of The Minerals, Metals &#38; Materials Society (TMS)}, publisher={Springer}, author={Klippstein, Sven Helge and Heiny, Florian and Pashikanti, Nagaraju and Gessler, Monika and Schmid, Hans-Joachim}, year={2022}, pages={1149–1157} }","mla":"Klippstein, Sven Helge, et al. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.” <i>JOM - The Journal of The Minerals, Metals &#38; Materials Society (TMS)</i>, vol. 74, Springer, 2022, pp. 1149–1157, doi:<a href=\"https://doi.org/10.1007/s11837-021-05042-w \">https://doi.org/10.1007/s11837-021-05042-w </a>.","apa":"Klippstein, S. H., Heiny, F., Pashikanti, N., Gessler, M., &#38; Schmid, H.-J. (2022). Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties. <i>JOM - The Journal of The Minerals, Metals &#38; Materials Society (TMS)</i>, <i>74</i>, 1149–1157. <a href=\"https://doi.org/10.1007/s11837-021-05042-w \">https://doi.org/10.1007/s11837-021-05042-w </a>"},"publication_status":"published","article_type":"original","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"}],"user_id":"464","_id":"30228","status":"public","type":"journal_article","title":"Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties","date_created":"2022-03-10T12:35:18Z","publisher":"Springer","year":"2022","quality_controlled":"1","language":[{"iso":"eng"}],"abstract":[{"text":"Confidence in additive manufacturing technologies is directly related to the predictability of part properties, which is influenced by several factors. To gain confidence, online process monitoring with dedicated and reliable feedback is desirable for every process. In this project, a powder bed monitoring system was developed as a retrofit solution for the EOS P3 laser sintering machines. A high-resolution camera records each layer, which is analyzed by a Region-Based Convolutional Neural Network (Mask R-CNN). Over 2500 images were annotated and classified to train the network in detecting defects in the powder bed at a very high level. Each defect is checked for intersection with exposure areas. To distinguish between acceptable imperfections and critical defects that lead to part rejection, the impact of these imperfections on part properties is investigated.","lang":"eng"}],"publication":"JOM - The Journal of The Minerals, Metals & Materials Society (TMS)"}]