---
_id: '26109'
abstract:
- lang: eng
  text: Temperature effects in the polymer laser sintering process are an important
    aspect regarding the process reproducibility and part quality. Depending on the
    job layout and position within the part cake, individual temperature histories
    occur during the process. Temperature history dependent effects are for example
    part warpage, the crystallization rate and powder ageing effects. This work focuses
    on temperatures and heat flow within laser sintered part cakes. Therefore, a thermal
    Finite Element (FE) model of a part cake is developed based on experimental in-process
    temperature measurements. Thermal boundary conditions and properties of the used
    bulk polymer powder are analyzed and relevant parameters are identified. The model
    is validated and optimized considering different job heights and ambient conditions
    during the cooling phase. It is finally possible to predict position-dependent
    temperature histories as a function of significant job parameters. The model allows
    a transfer of the results for varied boundary conditions during cooling. In combination
    with an implementation of built parts, this model will be an important tool for
    the development of optimized process controls and cooling strategies.
author:
- first_name: Stefan
  full_name: Josupeit, Stefan
  last_name: Josupeit
- first_name: Lavish
  full_name: Ordia, Lavish
  last_name: Ordia
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Josupeit S, Ordia L, Schmid H-J. Modelling of temperatures and heat flow within
    laser sintered part cakes. <i>Additive Manufacturing</i>. Published online 2016:189-196.
    doi:<a href="https://doi.org/10.1016/j.addma.2016.06.002">10.1016/j.addma.2016.06.002</a>
  apa: Josupeit, S., Ordia, L., &#38; Schmid, H.-J. (2016). Modelling of temperatures
    and heat flow within laser sintered part cakes. <i>Additive Manufacturing</i>,
    189–196. <a href="https://doi.org/10.1016/j.addma.2016.06.002">https://doi.org/10.1016/j.addma.2016.06.002</a>
  bibtex: '@article{Josupeit_Ordia_Schmid_2016, title={Modelling of temperatures and
    heat flow within laser sintered part cakes}, DOI={<a href="https://doi.org/10.1016/j.addma.2016.06.002">10.1016/j.addma.2016.06.002</a>},
    journal={Additive Manufacturing}, author={Josupeit, Stefan and Ordia, Lavish and
    Schmid, Hans-Joachim}, year={2016}, pages={189–196} }'
  chicago: Josupeit, Stefan, Lavish Ordia, and Hans-Joachim Schmid. “Modelling of
    Temperatures and Heat Flow within Laser Sintered Part Cakes.” <i>Additive Manufacturing</i>,
    2016, 189–96. <a href="https://doi.org/10.1016/j.addma.2016.06.002">https://doi.org/10.1016/j.addma.2016.06.002</a>.
  ieee: 'S. Josupeit, L. Ordia, and H.-J. Schmid, “Modelling of temperatures and heat
    flow within laser sintered part cakes,” <i>Additive Manufacturing</i>, pp. 189–196,
    2016, doi: <a href="https://doi.org/10.1016/j.addma.2016.06.002">10.1016/j.addma.2016.06.002</a>.'
  mla: Josupeit, Stefan, et al. “Modelling of Temperatures and Heat Flow within Laser
    Sintered Part Cakes.” <i>Additive Manufacturing</i>, 2016, pp. 189–96, doi:<a
    href="https://doi.org/10.1016/j.addma.2016.06.002">10.1016/j.addma.2016.06.002</a>.
  short: S. Josupeit, L. Ordia, H.-J. Schmid, Additive Manufacturing (2016) 189–196.
date_created: 2021-10-13T13:40:29Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.1016/j.addma.2016.06.002
language:
- iso: eng
page: 189-196
publication: Additive Manufacturing
publication_identifier:
  issn:
  - 2214-8604
publication_status: published
status: public
title: Modelling of temperatures and heat flow within laser sintered part cakes
type: journal_article
user_id: '70093'
year: '2016'
...
---
_id: '26111'
abstract:
- lang: eng
  text: The shape and fracture of the free surface frequently limits the measuring
    range and impedes the use of optical velocimetric techniques in parallel plate
    and cone plate setups. To prevent this, various kinds of edge guards are often
    employed. In the present study, we elucidate how an edge guard distorts the steady
    velocity profile in a parallel plate setup. To this end, we analyzed the velocity
    field of a strongly shear-thinning fluid, a Newtonian fluid and a set of suspensions
    via particle image velocimetry in a parallel plate device. Several guard ring
    sizes were studied. The distortion is described by a simple three parameter model.
    These parameters are mostly constant for different fluids and suspensions with
    particle volume fractions below 45%. With increasing radius, the guard ring.s
    influence approaches a limiting value that we attribute to the influence of the
    fluid surrounding the gap. Our results indicate a limiting ratio of the difference
    between plate radius and guard to gap size that should always be exceeded. In
    the presence of a guard ring, even Newtonian fluids do not exhibit a constant
    shear rate for most radial distances within the gap. This distortion of the velocity
    field challenges the simple superposition approach of unguarded device and guard
    influence that is prevalent in the literature.
author:
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
- first_name: S.
  full_name: Pieper, S.
  last_name: Pieper
citation:
  ama: Schmid H-J, Pieper S. Guard ring induced distortion of the steady velocity
    profile in a parallel plate rheometer. <i>Applied Rheology</i>. Published online
    2016. doi:<a href="https://doi.org/10.3933/APPLRHEOL-26-64533">10.3933/APPLRHEOL-26-64533</a>
  apa: Schmid, H.-J., &#38; Pieper, S. (2016). Guard ring induced distortion of the
    steady velocity profile in a parallel plate rheometer. <i>Applied Rheology</i>.
    <a href="https://doi.org/10.3933/APPLRHEOL-26-64533">https://doi.org/10.3933/APPLRHEOL-26-64533</a>
  bibtex: '@article{Schmid_Pieper_2016, title={Guard ring induced distortion of the
    steady velocity profile in a parallel plate rheometer}, DOI={<a href="https://doi.org/10.3933/APPLRHEOL-26-64533">10.3933/APPLRHEOL-26-64533</a>},
    journal={Applied Rheology}, author={Schmid, Hans-Joachim and Pieper, S.}, year={2016}
    }'
  chicago: Schmid, Hans-Joachim, and S. Pieper. “Guard Ring Induced Distortion of
    the Steady Velocity Profile in a Parallel Plate Rheometer.” <i>Applied Rheology</i>,
    2016. <a href="https://doi.org/10.3933/APPLRHEOL-26-64533">https://doi.org/10.3933/APPLRHEOL-26-64533</a>.
  ieee: 'H.-J. Schmid and S. Pieper, “Guard ring induced distortion of the steady
    velocity profile in a parallel plate rheometer,” <i>Applied Rheology</i>, 2016,
    doi: <a href="https://doi.org/10.3933/APPLRHEOL-26-64533">10.3933/APPLRHEOL-26-64533</a>.'
  mla: Schmid, Hans-Joachim, and S. Pieper. “Guard Ring Induced Distortion of the
    Steady Velocity Profile in a Parallel Plate Rheometer.” <i>Applied Rheology</i>,
    2016, doi:<a href="https://doi.org/10.3933/APPLRHEOL-26-64533">10.3933/APPLRHEOL-26-64533</a>.
  short: H.-J. Schmid, S. Pieper, Applied Rheology (2016).
date_created: 2021-10-13T13:43:24Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.3933/APPLRHEOL-26-64533
language:
- iso: eng
publication: Applied Rheology
publication_identifier:
  unknown:
  - 1617-8106 (Applied Rheology - Online Edition)
status: public
title: Guard ring induced distortion of the steady velocity profile in a parallel
  plate rheometer
type: journal_article
user_id: '70093'
year: '2016'
...
---
_id: '26118'
abstract:
- lang: eng
  text: Suspensions are subject to confinement induced structuring, i.e. layering,
    at the confining surfaces. While most of the previous work focused on layering
    in Couette cells, the present study aimed to characterize the resulting layers
    at the plates of a parallel plate rheometer with regard to their relative particle
    concentration. The particle concentration profile over the radial distance was
    characterized for various mean concentrations and gap heights. To this end, we
    mapped the distribution of fluorescently dyed tracer particles in density and
    refractive index matched suspensions. The results indicate that layering at the
    surfaces stabilizes as the ratio between gap height and particle diameter increases.
    For lower gap heights, i.e. as the suspension approaches a two dimensional state,
    the layer concentration was non-uniform over the plates. In general, results were
    quantitatively different for the upper and lower plate and the concentration profiles
    were noticeably asymmetric. We conclude that this is probably the result of the
    rheometer loading or the start-up process. The stable layers as well as the inhomogeneous
    particle distribution in general offer an explanation for the lack of transferability
    of viscosimetric results between different setups.
author:
- first_name: Sven
  full_name: Pieper, Sven
  last_name: Pieper
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Pieper S, Schmid H-J. Layer-formation of non-colloidal suspensions in a parallel
    plate rheometer under steady shear. <i>Journal of Non-Newtonian Fluid Mechanics</i>.
    Published online 2016:1-7. doi:<a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">10.1016/j.jnnfm.2016.04.004</a>
  apa: Pieper, S., &#38; Schmid, H.-J. (2016). Layer-formation of non-colloidal suspensions
    in a parallel plate rheometer under steady shear. <i>Journal of Non-Newtonian
    Fluid Mechanics</i>, 1–7. <a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">https://doi.org/10.1016/j.jnnfm.2016.04.004</a>
  bibtex: '@article{Pieper_Schmid_2016, title={Layer-formation of non-colloidal suspensions
    in a parallel plate rheometer under steady shear}, DOI={<a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">10.1016/j.jnnfm.2016.04.004</a>},
    journal={Journal of Non-Newtonian Fluid Mechanics}, author={Pieper, Sven and Schmid,
    Hans-Joachim}, year={2016}, pages={1–7} }'
  chicago: Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal
    Suspensions in a Parallel Plate Rheometer under Steady Shear.” <i>Journal of Non-Newtonian
    Fluid Mechanics</i>, 2016, 1–7. <a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">https://doi.org/10.1016/j.jnnfm.2016.04.004</a>.
  ieee: 'S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions
    in a parallel plate rheometer under steady shear,” <i>Journal of Non-Newtonian
    Fluid Mechanics</i>, pp. 1–7, 2016, doi: <a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">10.1016/j.jnnfm.2016.04.004</a>.'
  mla: Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal Suspensions
    in a Parallel Plate Rheometer under Steady Shear.” <i>Journal of Non-Newtonian
    Fluid Mechanics</i>, 2016, pp. 1–7, doi:<a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">10.1016/j.jnnfm.2016.04.004</a>.
  short: S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016)
    1–7.
date_created: 2021-10-13T13:55:45Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.1016/j.jnnfm.2016.04.004
language:
- iso: eng
page: 1-7
publication: Journal of Non-Newtonian Fluid Mechanics
publication_identifier:
  issn:
  - 0377-0257
publication_status: published
status: public
title: Layer-formation of non-colloidal suspensions in a parallel plate rheometer
  under steady shear
type: journal_article
user_id: '70093'
year: '2016'
...
---
_id: '27443'
author:
- first_name: Jürgen
  full_name: Gausemeier, Jürgen
  last_name: Gausemeier
- first_name: Michael
  full_name: Schmidt, Michael
  last_name: Schmidt
- first_name: Reiner
  full_name: Anderl, Reiner
  last_name: Anderl
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
- first_name: Christoph
  full_name: Leyens, Christoph
  last_name: Leyens
- first_name: Günther
  full_name: Seliger, Günther
  last_name: Seliger
- first_name: Michael
  full_name: Karg, Michael
  last_name: Karg
- first_name: Martin
  full_name: Kage, Martin
  last_name: Kage
citation:
  ama: Gausemeier J, Schmidt M, Anderl R, et al. <i>Additive Fertigung</i>. acatech
    - Deutsche Akademie der Technikwissenschaften; 2016.
  apa: Gausemeier, J., Schmidt, M., Anderl, R., Schmid, H.-J., Leyens, C., Seliger,
    G., Karg, M., &#38; Kage, M. (2016). <i>Additive Fertigung</i>. acatech - Deutsche
    Akademie der Technikwissenschaften.
  bibtex: '@book{Gausemeier_Schmidt_Anderl_Schmid_Leyens_Seliger_Karg_Kage_2016, place={München},
    title={Additive Fertigung}, publisher={acatech - Deutsche Akademie der Technikwissenschaften},
    author={Gausemeier, Jürgen and Schmidt, Michael and Anderl, Reiner and Schmid,
    Hans-Joachim and Leyens, Christoph and Seliger, Günther and Karg, Michael and
    Kage, Martin}, year={2016} }'
  chicago: 'Gausemeier, Jürgen, Michael Schmidt, Reiner Anderl, Hans-Joachim Schmid,
    Christoph Leyens, Günther Seliger, Michael Karg, and Martin Kage. <i>Additive
    Fertigung</i>. München: acatech - Deutsche Akademie der Technikwissenschaften,
    2016.'
  ieee: 'J. Gausemeier <i>et al.</i>, <i>Additive Fertigung</i>. München: acatech
    - Deutsche Akademie der Technikwissenschaften, 2016.'
  mla: Gausemeier, Jürgen, et al. <i>Additive Fertigung</i>. acatech - Deutsche Akademie
    der Technikwissenschaften, 2016.
  short: J. Gausemeier, M. Schmidt, R. Anderl, H.-J. Schmid, C. Leyens, G. Seliger,
    M. Karg, M. Kage, Additive Fertigung, acatech - Deutsche Akademie der Technikwissenschaften,
    München, 2016.
date_created: 2021-11-15T11:48:07Z
date_updated: 2022-01-06T06:57:39Z
department:
- _id: '676'
language:
- iso: ger
place: München
publisher: acatech - Deutsche Akademie der Technikwissenschaften
status: public
title: Additive Fertigung
type: book
user_id: '21240'
year: '2016'
...
---
_id: '22180'
abstract:
- lang: eng
  text: The implementation of lattice structures into additive manufactured parts
    is an important method to decrease part weight maintaining a high specific payload.
    However, the manufacturability of lattice structures and mechanical properties
    for polymer laser sintering are quite unknown yet. To examine the manufacturability,
    sandwich structures with different cell types, cell sizes and lattice bar widths
    were designed, manufactured and evaluated. A decisive criterion is for example
    a sufficient powder removal. In a second step, manufacturable structures were
    analyzed using four-point-bending tests. Experimental data is compared to the
    density of the lattice structures and allows for a direct comparison of different
    cell types with varied geometrical attributes. The results of this work are guidelines
    for the design and dimensioning of laser sintered lattice structures.
author:
- first_name: Stefan
  full_name: Josupeit, Stefan
  last_name: Josupeit
- first_name: Patrick
  full_name: Delfs, Patrick
  last_name: Delfs
- first_name: Dennis
  full_name: Menge, Dennis
  id: '29240'
  last_name: Menge
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Josupeit S, Delfs P, Menge D, Schmid H-J. Manufacturability and Mechanical
    Characterization of Laser Sintered Lattice Structures. In: <i>27th Annual International
    Solid Freeform Fabrication Symposium </i>. Vol 27. ; 2016:2077-2086. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf</a>'
  apa: Josupeit, S., Delfs, P., Menge, D., &#38; Schmid, H.-J. (2016). Manufacturability
    and Mechanical Characterization of Laser Sintered Lattice Structures. In <i>27th
    Annual International Solid Freeform Fabrication Symposium </i> (Vol. 27, pp. 2077–2086).
    <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf</a>
  bibtex: '@inproceedings{Josupeit_Delfs_Menge_Schmid_2016, title={Manufacturability
    and Mechanical Characterization of Laser Sintered Lattice Structures}, volume={27},
    DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf</a>},
    booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Josupeit,
    Stefan and Delfs, Patrick and Menge, Dennis and Schmid, Hans-Joachim}, year={2016},
    pages={2077–2086} }'
  chicago: Josupeit, Stefan, Patrick Delfs, Dennis Menge, and Hans-Joachim Schmid.
    “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.”
    In <i>27th Annual International Solid Freeform Fabrication Symposium </i>, 27:2077–86,
    2016. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf</a>.
  ieee: S. Josupeit, P. Delfs, D. Menge, and H.-J. Schmid, “Manufacturability and
    Mechanical Characterization of Laser Sintered Lattice Structures,” in <i>27th
    Annual International Solid Freeform Fabrication Symposium </i>, 2016, vol. 27,
    pp. 2077–2086.
  mla: Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization
    of Laser Sintered Lattice Structures.” <i>27th Annual International Solid Freeform
    Fabrication Symposium </i>, vol. 27, 2016, pp. 2077–86, doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf</a>.
  short: 'S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International
    Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.'
date_created: 2021-05-14T07:46:10Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf
intvolume: '        27'
language:
- iso: eng
page: 2077-2086
publication: '27th Annual International Solid Freeform Fabrication Symposium '
status: public
title: Manufacturability and Mechanical Characterization of Laser Sintered Lattice
  Structures
type: conference
user_id: '71545'
volume: 27
year: '2016'
...
---
_id: '22185'
abstract:
- lang: eng
  text: The layered structure of Additive Manufacturing processes results in a stair-
    stepping effect of the surface topographies. In general, the impact of this effect
    strongly depends on the build angle of a surface, whereas the overall surface
    roughness is additionally caused by the resolution of the specific AM process.
    The aim of this work is the prediction of the surface quality in dependence of
    the building orientation of a part. These results can finally be used to optimize
    the orientation to get a desired surface quality. As not all parts of the component
    surface are equally important, a preselection of areas can be used to improve
    the overall surface quality of relevant areas. The model uses the digital AMF
    format of a part. Each triangle is assigned with a roughness value and by testing
    different orientations the best one can be found. This approach needs a database
    for the surface qualities. This must be done separately for each Additive Manufacturing
    process and is shown exemplarily with a surface topography simulation for the
    laser sintering process.
author:
- first_name: Patrick
  full_name: Delfs, Patrick
  last_name: Delfs
- first_name: Marcel
  full_name: Tows, Marcel
  last_name: Tows
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Delfs P, Tows M, Schmid H-J. Optimized build orientation of additive manufactured
    parts for improved surface quality and build time. <i>Additive Manufacturing</i>.
    2016;2(12, Part B):214-320. doi:<a href="https://doi.org/10.1016/j.addma.2016.06.003">10.1016/j.addma.2016.06.003</a>
  apa: Delfs, P., Tows, M., &#38; Schmid, H.-J. (2016). Optimized build orientation
    of additive manufactured parts for improved surface quality and build time. <i>Additive
    Manufacturing</i>, <i>2</i>(12, Part B), 214–320. <a href="https://doi.org/10.1016/j.addma.2016.06.003">https://doi.org/10.1016/j.addma.2016.06.003</a>
  bibtex: '@article{Delfs_Tows_Schmid_2016, title={Optimized build orientation of
    additive manufactured parts for improved surface quality and build time}, volume={2},
    DOI={<a href="https://doi.org/10.1016/j.addma.2016.06.003">10.1016/j.addma.2016.06.003</a>},
    number={12, Part B}, journal={Additive Manufacturing}, publisher={Elsevier}, author={Delfs,
    Patrick and Tows, Marcel and Schmid, Hans-Joachim}, year={2016}, pages={214–320}
    }'
  chicago: 'Delfs, Patrick, Marcel Tows, and Hans-Joachim Schmid. “Optimized Build
    Orientation of Additive Manufactured Parts for Improved Surface Quality and Build
    Time.” <i>Additive Manufacturing</i> 2, no. 12, Part B (2016): 214–320. <a href="https://doi.org/10.1016/j.addma.2016.06.003">https://doi.org/10.1016/j.addma.2016.06.003</a>.'
  ieee: P. Delfs, M. Tows, and H.-J. Schmid, “Optimized build orientation of additive
    manufactured parts for improved surface quality and build time,” <i>Additive Manufacturing</i>,
    vol. 2, no. 12, Part B, pp. 214–320, 2016.
  mla: Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured
    Parts for Improved Surface Quality and Build Time.” <i>Additive Manufacturing</i>,
    vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:<a href="https://doi.org/10.1016/j.addma.2016.06.003">10.1016/j.addma.2016.06.003</a>.
  short: P. Delfs, M. Tows, H.-J. Schmid, Additive Manufacturing 2 (2016) 214–320.
date_created: 2021-05-14T07:46:16Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1016/j.addma.2016.06.003
intvolume: '         2'
issue: 12, Part B
language:
- iso: eng
page: 214-320
publication: Additive Manufacturing
publication_identifier:
  isbn:
  - 2214-8604
publisher: Elsevier
status: public
title: Optimized build orientation of additive manufactured parts for improved surface
  quality and build time
type: journal_article
user_id: '71545'
volume: 2
year: '2016'
...
---
_id: '22190'
author:
- first_name: Patrick
  full_name: Delfs, Patrick
  last_name: Delfs
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Delfs P, Schmid H-J. Extended Analysis of the Surface Topography of Laser
    Sintered Polymer Parts . In: <i>Fraunhofer Direct Digital Manufacturing Conference</i>.
    Vol 3. ; 2016:411-414. doi:<a href="https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#">https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#</a>'
  apa: Delfs, P., &#38; Schmid, H.-J. (2016). Extended Analysis of the Surface Topography
    of Laser Sintered Polymer Parts . In <i>Fraunhofer Direct Digital Manufacturing
    Conference</i> (Vol. 3, pp. 411–414). <a href="https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#">https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#</a>
  bibtex: '@inproceedings{Delfs_Schmid_2016, title={Extended Analysis of the Surface
    Topography of Laser Sintered Polymer Parts }, volume={3}, DOI={<a href="https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#">https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#</a>},
    booktitle={Fraunhofer Direct Digital Manufacturing Conference}, author={Delfs,
    Patrick and Schmid, Hans-Joachim}, year={2016}, pages={411–414} }'
  chicago: Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface
    Topography of Laser Sintered Polymer Parts .” In <i>Fraunhofer Direct Digital
    Manufacturing Conference</i>, 3:411–14, 2016. <a href="https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#">https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#</a>.
  ieee: P. Delfs and H.-J. Schmid, “Extended Analysis of the Surface Topography of
    Laser Sintered Polymer Parts ,” in <i>Fraunhofer Direct Digital Manufacturing
    Conference</i>, 2016, vol. 3, pp. 411–414.
  mla: Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface
    Topography of Laser Sintered Polymer Parts .” <i>Fraunhofer Direct Digital Manufacturing
    Conference</i>, vol. 3, 2016, pp. 411–14, doi:<a href="https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#">https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#</a>.
  short: 'P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference,
    2016, pp. 411–414.'
date_created: 2021-05-14T07:46:21Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#
intvolume: '         3'
language:
- iso: eng
page: 411-414
publication: Fraunhofer Direct Digital Manufacturing Conference
publication_identifier:
  isbn:
  - 978-3-8396-1001-5
status: public
title: 'Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts '
type: conference
user_id: '71545'
volume: 3
year: '2016'
...
---
_id: '22194'
author:
- first_name: Stefan
  full_name: Josupeit, Stefan
  last_name: Josupeit
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Josupeit S, Schmid H-J. Thermal properties of polyamide 12 powder for application
    in laser sintering. In: <i>International Congress on Particle Technology (PARTEC)
    </i>. ; 2016.'
  apa: Josupeit, S., &#38; Schmid, H.-J. (2016). Thermal properties of polyamide 12
    powder for application in laser sintering. In <i>International Congress on Particle
    Technology (PARTEC) </i>.
  bibtex: '@inproceedings{Josupeit_Schmid_2016, title={Thermal properties of polyamide
    12 powder for application in laser sintering}, booktitle={International Congress
    on Particle Technology (PARTEC) }, author={Josupeit, Stefan and Schmid, Hans-Joachim},
    year={2016} }'
  chicago: Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide
    12 Powder for Application in Laser Sintering.” In <i>International Congress on
    Particle Technology (PARTEC) </i>, 2016.
  ieee: S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for
    application in laser sintering,” in <i>International Congress on Particle Technology
    (PARTEC) </i>, 2016.
  mla: Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide
    12 Powder for Application in Laser Sintering.” <i>International Congress on Particle
    Technology (PARTEC) </i>, 2016.
  short: 'S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology
    (PARTEC) , 2016.'
date_created: 2021-05-14T07:46:26Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
language:
- iso: eng
publication: 'International Congress on Particle Technology (PARTEC) '
status: public
title: Thermal properties of polyamide 12 powder for application in laser sintering
type: conference
user_id: '71545'
year: '2016'
...
---
_id: '22200'
abstract:
- lang: eng
  text: In the polymer laser sinter process, part quality depends on many influencing
    factors along the process chain. For application of the technology in series production
    and an integration of laser sintered parts into a technical environment, the dimensional
    accuracy of parts has to be taken into account. Therefore, occuring deviatons
    and their scattering have to be reduced and homogenized based on process parameters
    and build job layout. In this work, the dimensional accuracy of laser sintered
    parts is analyzed for varied parameter values. Influences of different process
    and geometrical build job parameters on dimensional deviatons are figured out.
    The experimental results allow an evaluation of more and less important influences.
    Finally, measures are deduced to reduce and homogenize dimensional deviations.
author:
- first_name: Stefan
  full_name: Josupeit, Stefan
  last_name: Josupeit
- first_name: Patrick
  full_name: Delfs, Patrick
  last_name: Delfs
- first_name: Tobias
  full_name: Lieneke, Tobias
  id: '13956'
  last_name: Lieneke
- first_name: Guido
  full_name: Adam, Guido
  last_name: Adam
- first_name: Monika
  full_name: Gessler, Monika
  last_name: Gessler
- first_name: H.
  full_name: Pfisterer, H.
  last_name: Pfisterer
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Josupeit S, Delfs P, Lieneke T, et al. Dimensional accuracy of polymer laser
    sintered parts: Influences and measures. In: <i>Rapid Tech - International Trade
    Show &#38; Conference for Additive Manufacturing </i>. ; 2016:107-120. doi:<a
    href="https://doi.org/10.3139/9783446450608.009">10.3139/9783446450608.009</a>'
  apa: 'Josupeit, S., Delfs, P., Lieneke, T., Adam, G., Gessler, M., Pfisterer, H.,
    &#38; Schmid, H.-J. (2016). Dimensional accuracy of polymer laser sintered parts:
    Influences and measures. In <i>Rapid Tech - International Trade Show &#38; Conference
    for Additive Manufacturing </i> (pp. 107–120). <a href="https://doi.org/10.3139/9783446450608.009">https://doi.org/10.3139/9783446450608.009</a>'
  bibtex: '@inproceedings{Josupeit_Delfs_Lieneke_Adam_Gessler_Pfisterer_Schmid_2016,
    title={Dimensional accuracy of polymer laser sintered parts: Influences and measures},
    DOI={<a href="https://doi.org/10.3139/9783446450608.009">10.3139/9783446450608.009</a>},
    booktitle={Rapid Tech - International Trade Show &#38; Conference for Additive
    Manufacturing }, author={Josupeit, Stefan and Delfs, Patrick and Lieneke, Tobias
    and Adam, Guido and Gessler, Monika and Pfisterer, H. and Schmid, Hans-Joachim},
    year={2016}, pages={107–120} }'
  chicago: 'Josupeit, Stefan, Patrick Delfs, Tobias Lieneke, Guido Adam, Monika Gessler,
    H. Pfisterer, and Hans-Joachim Schmid. “Dimensional Accuracy of Polymer Laser
    Sintered Parts: Influences and Measures.” In <i>Rapid Tech - International Trade
    Show &#38; Conference for Additive Manufacturing </i>, 107–20, 2016. <a href="https://doi.org/10.3139/9783446450608.009">https://doi.org/10.3139/9783446450608.009</a>.'
  ieee: 'S. Josupeit <i>et al.</i>, “Dimensional accuracy of polymer laser sintered
    parts: Influences and measures,” in <i>Rapid Tech - International Trade Show &#38;
    Conference for Additive Manufacturing </i>, 2016, pp. 107–120.'
  mla: 'Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts:
    Influences and Measures.” <i>Rapid Tech - International Trade Show &#38; Conference
    for Additive Manufacturing </i>, 2016, pp. 107–20, doi:<a href="https://doi.org/10.3139/9783446450608.009">10.3139/9783446450608.009</a>.'
  short: 'S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J.
    Schmid, in: Rapid Tech - International Trade Show &#38; Conference for Additive
    Manufacturing , 2016, pp. 107–120.'
date_created: 2021-05-14T07:46:33Z
date_updated: 2022-01-06T06:55:29Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
- _id: '146'
doi: 10.3139/9783446450608.009
language:
- iso: eng
page: 107-120
publication: 'Rapid Tech - International Trade Show & Conference for Additive Manufacturing '
publication_identifier:
  isbn:
  - 978-3-446-45060-8
status: public
title: 'Dimensional accuracy of polymer laser sintered parts: Influences and measures'
type: conference
user_id: '71545'
year: '2016'
...
---
_id: '22404'
abstract:
- lang: eng
  text: Additive Manufacturing (AM), also known as 3D printing, is a relatively new
    technology which enables the toolless production of components and entire assemblies
    directly from a CAD file. Today, the technology is still not widely used in industrial
    production. It is mainly limited to special applications, although it shows great
    potential. In this paper, first approaches are shown to apply AM to the production
    of rotors for permanent magnet synchronous machines (PMSM). The possibilities
    of a lightweight design with a low moment of inertia as well as the influence
    on the magnetic anisotropy for an improved sensorless control of PMSM are pointed
    out. The results clearly demonstrate the great potential of additive manufacturing
    in electrical engineering applications.
author:
- first_name: Stefan
  full_name: Lammers, Stefan
  id: '13835'
  last_name: Lammers
- first_name: Guido
  full_name: Adam, Guido
  last_name: Adam
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
- first_name: Rafael
  full_name: Mrozek, Rafael
  last_name: Mrozek
- first_name: Rainer
  full_name: Oberacker, Rainer
  last_name: Oberacker
- first_name: Michael
  full_name: Hoffmann, Michael
  last_name: Hoffmann
- first_name: Francesco
  full_name: Quattrone, Francesco
  last_name: Quattrone
- first_name: Bernd
  full_name: Ponick, Bernd
  last_name: Ponick
citation:
  ama: 'Lammers S, Adam G, Schmid H-J, et al. Additive Manufacturing of a Lightweight
    Rotor for a Permanent Magnet Synchronous Machine. In: <i>EDPC 2016</i>. ; 2016.
    doi:<a href="https://doi.org/10.1109/EDPC.2016.7851312">10.1109/EDPC.2016.7851312</a>'
  apa: Lammers, S., Adam, G., Schmid, H.-J., Mrozek, R., Oberacker, R., Hoffmann,
    M., … Ponick, B. (2016). Additive Manufacturing of a Lightweight Rotor for a Permanent
    Magnet Synchronous Machine. In <i>EDPC 2016</i>. <a href="https://doi.org/10.1109/EDPC.2016.7851312">https://doi.org/10.1109/EDPC.2016.7851312</a>
  bibtex: '@inproceedings{Lammers_Adam_Schmid_Mrozek_Oberacker_Hoffmann_Quattrone_Ponick_2016,
    title={Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous
    Machine}, DOI={<a href="https://doi.org/10.1109/EDPC.2016.7851312">10.1109/EDPC.2016.7851312</a>},
    booktitle={EDPC 2016}, author={Lammers, Stefan and Adam, Guido and Schmid, Hans-Joachim
    and Mrozek, Rafael and Oberacker, Rainer and Hoffmann, Michael and Quattrone,
    Francesco and Ponick, Bernd}, year={2016} }'
  chicago: Lammers, Stefan, Guido Adam, Hans-Joachim Schmid, Rafael Mrozek, Rainer
    Oberacker, Michael Hoffmann, Francesco Quattrone, and Bernd Ponick. “Additive
    Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.”
    In <i>EDPC 2016</i>, 2016. <a href="https://doi.org/10.1109/EDPC.2016.7851312">https://doi.org/10.1109/EDPC.2016.7851312</a>.
  ieee: S. Lammers <i>et al.</i>, “Additive Manufacturing of a Lightweight Rotor for
    a Permanent Magnet Synchronous Machine,” in <i>EDPC 2016</i>, 2016.
  mla: Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for
    a Permanent Magnet Synchronous Machine.” <i>EDPC 2016</i>, 2016, doi:<a href="https://doi.org/10.1109/EDPC.2016.7851312">10.1109/EDPC.2016.7851312</a>.
  short: 'S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann,
    F. Quattrone, B. Ponick, in: EDPC 2016, 2016.'
date_created: 2021-06-15T11:09:32Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.1109/EDPC.2016.7851312
language:
- iso: eng
publication: EDPC 2016
publication_identifier:
  isbn:
  - 978-1-5090-2908-2
status: public
title: Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous
  Machine
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '22408'
author:
- first_name: Stefan
  full_name: Josupeit, Stefan
  last_name: Josupeit
- first_name: Patrick
  full_name: Delfs, Patrick
  last_name: Delfs
- first_name: Tobias
  full_name: Lieneke, Tobias
  id: '13956'
  last_name: Lieneke
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Josupeit S, Delfs P, Lieneke T, Schmid H-J. Influences on the dimensional
    Accuracy of Laser Sintered Parts along the Process Chain. In: <i>27th Annual International
    Solid Freeform Fabrication Symposium </i>. ; 2016.'
  apa: Josupeit, S., Delfs, P., Lieneke, T., &#38; Schmid, H.-J. (2016). Influences
    on the dimensional Accuracy of Laser Sintered Parts along the Process Chain. In
    <i>27th Annual International Solid Freeform Fabrication Symposium </i>.
  bibtex: '@inproceedings{Josupeit_Delfs_Lieneke_Schmid_2016, title={Influences on
    the dimensional Accuracy of Laser Sintered Parts along the Process Chain}, booktitle={27th
    Annual International Solid Freeform Fabrication Symposium }, author={Josupeit,
    Stefan and Delfs, Patrick and Lieneke, Tobias and Schmid, Hans-Joachim}, year={2016}
    }'
  chicago: Josupeit, Stefan, Patrick Delfs, Tobias Lieneke, and Hans-Joachim Schmid.
    “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process
    Chain.” In <i>27th Annual International Solid Freeform Fabrication Symposium </i>,
    2016.
  ieee: S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional
    Accuracy of Laser Sintered Parts along the Process Chain,” in <i>27th Annual International
    Solid Freeform Fabrication Symposium </i>, 2016.
  mla: Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered
    Parts along the Process Chain.” <i>27th Annual International Solid Freeform Fabrication
    Symposium </i>, 2016.
  short: 'S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International
    Solid Freeform Fabrication Symposium , 2016.'
date_created: 2021-06-15T11:09:36Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '150'
language:
- iso: eng
publication: '27th Annual International Solid Freeform Fabrication Symposium '
status: public
title: Influences on the dimensional Accuracy of Laser Sintered Parts along the Process
  Chain
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '26113'
abstract:
- lang: eng
  text: In the polymer laser sinter process, part quality depends on many influencing
    factors along the process chain. For application of the technology in series production
    and an integration of laser sintered parts into a technical environment, the dimensional
    accuracy of parts has to be taken into account. Therefore, occurring deviations
    of the process have to be known to define tolerances for part design. Dimensional
    deviations and their scattering have to be reduced and homogenized based on process
    parameters and build job layout. In this work, the dimensional accuracy of laser
    sintered parts is analyzed for varied parameter values. Influences of different
    process and geometrical build job parameters on dimensional deviations are figured
    out. The experimental results allow an evaluation of more and less important influences.
    Finally, measures are deduced to reduce and homogenize dimensional deviations.
citation:
  ama: 'Kniffka W, Eichmann M, Witt G, et al., eds. <i>Geometrische Genauigkeit von
    Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer
    Laser Sintered Parts: Influences and Measures</i>.; 2016. doi:<a href="https://doi.org/10.3139/9783446450608.009">10.3139/9783446450608.009</a>'
  apa: 'Kniffka, W., Eichmann, M., Witt, G., Josupeit, S., Delfs, P., Lieneke, T.,
    Adam, G., &#38; Schmid, H.-J. (Eds.). (2016). <i>Geometrische Genauigkeit von
    Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer
    laser sintered parts: Influences and measures</i>. <a href="https://doi.org/10.3139/9783446450608.009">https://doi.org/10.3139/9783446450608.009</a>'
  bibtex: '@book{Kniffka_Eichmann_Witt_Josupeit_Delfs_Lieneke_Adam_Schmid_2016, place={München},
    title={Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen
    / Dimensional accuracy of polymer laser sintered parts: Influences and measures},
    DOI={<a href="https://doi.org/10.3139/9783446450608.009">10.3139/9783446450608.009</a>},
    year={2016} }'
  chicago: 'Kniffka, Wieland, Michael Eichmann, Gerd Witt, S. Josupeit, P. Delfs,
    Tobias Lieneke, G. Adam, and Hans-Joachim Schmid, eds. <i>Geometrische Genauigkeit
    von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer
    Laser Sintered Parts: Influences and Measures</i>. München, 2016. <a href="https://doi.org/10.3139/9783446450608.009">https://doi.org/10.3139/9783446450608.009</a>.'
  ieee: 'W. Kniffka <i>et al.</i>, Eds., <i>Geometrische Genauigkeit von Lasersinter-Bauteilen:
    Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts:
    Influences and measures</i>. München, 2016.'
  mla: 'Kniffka, Wieland, et al., editors. <i>Geometrische Genauigkeit von Lasersinter-Bauteilen:
    Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts:
    Influences and Measures</i>. 2016, doi:<a href="https://doi.org/10.3139/9783446450608.009">10.3139/9783446450608.009</a>.'
  short: 'W. Kniffka, M. Eichmann, G. Witt, S. Josupeit, P. Delfs, T. Lieneke, G.
    Adam, H.-J. Schmid, eds., Geometrische Genauigkeit von Lasersinter-Bauteilen:
    Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts:
    Influences and Measures, München, 2016.'
date_created: 2021-10-13T13:49:12Z
date_updated: 2024-03-27T15:28:11Z
department:
- _id: '146'
doi: 10.3139/9783446450608.009
editor:
- first_name: Wieland
  full_name: Kniffka, Wieland
  last_name: Kniffka
- first_name: Michael
  full_name: Eichmann, Michael
  last_name: Eichmann
- first_name: Gerd
  full_name: Witt, Gerd
  last_name: Witt
- first_name: S.
  full_name: Josupeit, S.
  last_name: Josupeit
- first_name: P.
  full_name: Delfs, P.
  last_name: Delfs
- first_name: Tobias
  full_name: Lieneke, Tobias
  id: '13956'
  last_name: Lieneke
- first_name: G.
  full_name: Adam, G.
  last_name: Adam
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
  orcid: 000-0001-8590-1921
language:
- iso: eng
place: München
publication_identifier:
  eisbn:
  - 978-3-446-45060-8
  isbn:
  - 978-3-446-45017-2
publication_status: published
status: public
title: 'Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen
  / Dimensional accuracy of polymer laser sintered parts: Influences and measures'
type: book_editor
user_id: '13956'
year: '2016'
...
---
_id: '21947'
abstract:
- lang: eng
  text: Wall slip is a long-known phenomenon in the field of rheology. Nevertheless,
    the origin and the evolution are not completely clear yet. Regarding suspensions,
    the effect becomes even more complicated, because different mechanisms like pure
    slip or slip due to particle migration have to be taken into account. Furthermore,
    suspensions themselves show many flow anomalies and the isolation of slip is complicated.
    In order to develop working physical models, further insight is necessary. In
    this work, we measured experimentally the wall slip velocities of different highly
    filled suspensions in a rectangular slit die directly with respect to the particle
    concentration and the particle size. The slip velocities were obtained using a
    particle image velocimetry (PIV) system. The suspensions consisting of a castor
    oil–cinnamon oil blend and PMMA particles were matched in terms of refractive
    indexes to appear transparent. Hereby, possible optical path lengths larger than
    15 mm were achieved. The slip velocities were found to be in a quadratic relation
    to the wall shear stress. Furthermore, the overall flow rate as well as the particle
    concentration has a direct influence on the slip. Concerning the shear stress,
    there seem to be two regions of slip with different physical characteristics.
    Furthermore, we estimated the slip layer thickness directly from the velocity
    profiles and propose a new interpretation. The PIV technique is used to investigate
    the viscosity and implicit the concentration profile in the slit die. It is shown
    that the particle migration process is quite fast.
article_type: original
author:
- first_name: Steffen
  full_name: Jesinghausen, Steffen
  id: '3959'
  last_name: Jesinghausen
  orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Rene
  full_name: Weiffen, Rene
  last_name: Weiffen
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Jesinghausen S, Weiffen R, Schmid H-J. Direct measurement of wall slip and
    slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel
    flows. <i>Experiments in Fluids</i>. Published online 2016. doi:<a href="https://doi.org/10.1007/s00348-016-2241-6">10.1007/s00348-016-2241-6</a>
  apa: Jesinghausen, S., Weiffen, R., &#38; Schmid, H.-J. (2016). Direct measurement
    of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions
    in rectangular channel flows. <i>Experiments in Fluids</i>. <a href="https://doi.org/10.1007/s00348-016-2241-6">https://doi.org/10.1007/s00348-016-2241-6</a>
  bibtex: '@article{Jesinghausen_Weiffen_Schmid_2016, title={Direct measurement of
    wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in
    rectangular channel flows}, DOI={<a href="https://doi.org/10.1007/s00348-016-2241-6">10.1007/s00348-016-2241-6</a>},
    journal={Experiments in Fluids}, author={Jesinghausen, Steffen and Weiffen, Rene
    and Schmid, Hans-Joachim}, year={2016} }'
  chicago: Jesinghausen, Steffen, Rene Weiffen, and Hans-Joachim Schmid. “Direct Measurement
    of Wall Slip and Slip Layer Thickness of Non-Brownian Hard-Sphere Suspensions
    in Rectangular Channel Flows.” <i>Experiments in Fluids</i>, 2016. <a href="https://doi.org/10.1007/s00348-016-2241-6">https://doi.org/10.1007/s00348-016-2241-6</a>.
  ieee: 'S. Jesinghausen, R. Weiffen, and H.-J. Schmid, “Direct measurement of wall
    slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular
    channel flows,” <i>Experiments in Fluids</i>, 2016, doi: <a href="https://doi.org/10.1007/s00348-016-2241-6">10.1007/s00348-016-2241-6</a>.'
  mla: Jesinghausen, Steffen, et al. “Direct Measurement of Wall Slip and Slip Layer
    Thickness of Non-Brownian Hard-Sphere Suspensions in Rectangular Channel Flows.”
    <i>Experiments in Fluids</i>, 2016, doi:<a href="https://doi.org/10.1007/s00348-016-2241-6">10.1007/s00348-016-2241-6</a>.
  short: S. Jesinghausen, R. Weiffen, H.-J. Schmid, Experiments in Fluids (2016).
date_created: 2021-05-04T08:47:31Z
date_updated: 2023-01-17T07:37:53Z
department:
- _id: '150'
- _id: '9'
doi: 10.1007/s00348-016-2241-6
keyword:
- Rheology
- Wall Slip
- Slip
- apparent slip
- suspension
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/article/10.1007/s00348-016-2241-6
publication: Experiments in Fluids
publication_identifier:
  issn:
  - 0723-4864
  - 1432-1114
publication_status: published
quality_controlled: '1'
status: public
title: Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere
  suspensions in rectangular channel flows
type: journal_article
user_id: '3959'
year: '2016'
...
---
_id: '25140'
article_type: original
author:
- first_name: Sven
  full_name: Pieper, Sven
  last_name: Pieper
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
  orcid: 000-0001-8590-1921
citation:
  ama: Pieper S, Schmid H-J. Layer-formation of non-colloidal suspensions in a parallel
    plate rheometer under steady shear. <i>Journal of Non-Newtonian Fluid Mechanics</i>.
    Published online 2016:1-7. doi:<a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">10.1016/j.jnnfm.2016.04.004</a>
  apa: Pieper, S., &#38; Schmid, H.-J. (2016). Layer-formation of non-colloidal suspensions
    in a parallel plate rheometer under steady shear. <i>Journal of Non-Newtonian
    Fluid Mechanics</i>, 1–7. <a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">https://doi.org/10.1016/j.jnnfm.2016.04.004</a>
  bibtex: '@article{Pieper_Schmid_2016, title={Layer-formation of non-colloidal suspensions
    in a parallel plate rheometer under steady shear}, DOI={<a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">10.1016/j.jnnfm.2016.04.004</a>},
    journal={Journal of Non-Newtonian Fluid Mechanics}, author={Pieper, Sven and Schmid,
    Hans-Joachim}, year={2016}, pages={1–7} }'
  chicago: Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal
    Suspensions in a Parallel Plate Rheometer under Steady Shear.” <i>Journal of Non-Newtonian
    Fluid Mechanics</i>, 2016, 1–7. <a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">https://doi.org/10.1016/j.jnnfm.2016.04.004</a>.
  ieee: 'S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions
    in a parallel plate rheometer under steady shear,” <i>Journal of Non-Newtonian
    Fluid Mechanics</i>, pp. 1–7, 2016, doi: <a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">10.1016/j.jnnfm.2016.04.004</a>.'
  mla: Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal Suspensions
    in a Parallel Plate Rheometer under Steady Shear.” <i>Journal of Non-Newtonian
    Fluid Mechanics</i>, 2016, pp. 1–7, doi:<a href="https://doi.org/10.1016/j.jnnfm.2016.04.004">10.1016/j.jnnfm.2016.04.004</a>.
  short: S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016)
    1–7.
date_created: 2021-09-29T14:21:35Z
date_updated: 2023-04-27T11:21:10Z
department:
- _id: '150'
doi: 10.1016/j.jnnfm.2016.04.004
language:
- iso: eng
page: 1-7
publication: Journal of Non-Newtonian Fluid Mechanics
publication_identifier:
  issn:
  - 0377-0257
publication_status: published
quality_controlled: '1'
status: public
title: Layer-formation of non-colloidal suspensions in a parallel plate rheometer
  under steady shear
type: journal_article
user_id: '3959'
year: '2016'
...
---
_id: '26108'
abstract:
- lang: eng
  text: The highly efficient filtration of ultrafine dust emitted by biomass combustion
    processes with a baghouse filter has been successfully tested in the last years.
    To protect the filter material from the very small and sticky fine dust particles
    and to guarantee very high total collection efficiencies (> 99 %) in a long-term
    stable process, the use of a precoat is necessary. Tests done in a laboratory
    and a real-application plant show that the reuse of precoat materials can lead
    to significant savings. Considering the influences of different combustion processes,
    the associated precoat efficiencies could be calculated. With these characteristic
    ratios, it is possible to evaluate different process settings. Hence, the amount
    and the cost of the needed precoat could be reduced significantly.
author:
- first_name: Sascha
  full_name: Schiller, Sascha
  last_name: Schiller
- first_name: Christoph
  full_name: Hellmich, Christoph
  last_name: Hellmich
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Schiller S, Hellmich C, Schmid H-J. Evaluation of the Efficiency of Filtration
    Processes Using Precoat Materials. <i>Chemical Engineering &#38; Technology</i>.
    Published online 2015:491-498. doi:<a href="https://doi.org/10.1002/ceat.201500385">10.1002/ceat.201500385</a>
  apa: Schiller, S., Hellmich, C., &#38; Schmid, H.-J. (2015). Evaluation of the Efficiency
    of Filtration Processes Using Precoat Materials. <i>Chemical Engineering &#38;
    Technology</i>, 491–498. <a href="https://doi.org/10.1002/ceat.201500385">https://doi.org/10.1002/ceat.201500385</a>
  bibtex: '@article{Schiller_Hellmich_Schmid_2015, title={Evaluation of the Efficiency
    of Filtration Processes Using Precoat Materials}, DOI={<a href="https://doi.org/10.1002/ceat.201500385">10.1002/ceat.201500385</a>},
    journal={Chemical Engineering &#38; Technology}, author={Schiller, Sascha and
    Hellmich, Christoph and Schmid, Hans-Joachim}, year={2015}, pages={491–498} }'
  chicago: Schiller, Sascha, Christoph Hellmich, and Hans-Joachim Schmid. “Evaluation
    of the Efficiency of Filtration Processes Using Precoat Materials.” <i>Chemical
    Engineering &#38; Technology</i>, 2015, 491–98. <a href="https://doi.org/10.1002/ceat.201500385">https://doi.org/10.1002/ceat.201500385</a>.
  ieee: 'S. Schiller, C. Hellmich, and H.-J. Schmid, “Evaluation of the Efficiency
    of Filtration Processes Using Precoat Materials,” <i>Chemical Engineering &#38;
    Technology</i>, pp. 491–498, 2015, doi: <a href="https://doi.org/10.1002/ceat.201500385">10.1002/ceat.201500385</a>.'
  mla: Schiller, Sascha, et al. “Evaluation of the Efficiency of Filtration Processes
    Using Precoat Materials.” <i>Chemical Engineering &#38; Technology</i>, 2015,
    pp. 491–98, doi:<a href="https://doi.org/10.1002/ceat.201500385">10.1002/ceat.201500385</a>.
  short: S. Schiller, C. Hellmich, H.-J. Schmid, Chemical Engineering &#38; Technology
    (2015) 491–498.
date_created: 2021-10-13T13:38:58Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.1002/ceat.201500385
language:
- iso: eng
page: 491-498
publication: Chemical Engineering & Technology
publication_identifier:
  issn:
  - 0930-7516
publication_status: published
status: public
title: Evaluation of the Efficiency of Filtration Processes Using Precoat Materials
type: journal_article
user_id: '70093'
year: '2015'
...
---
_id: '26119'
abstract:
- lang: eng
  text: The emphasis of the study presented is on a new process of particle extraction
    to transfer magnetite nanoparticles from an aqueous into an immiscible organic
    phase directly through the liquid-liquid interface. For the production of high-quality
    organosols, stabilized colloidal and functionalized particles are required in
    a liquid organic phase. The mechanism of phase transfer is initiated by adsorption
    and chemical binding of surfactants (fatty acids) at the particle surface. The
    resulting physico-chemical dispersion of the hydrophobically modified particles
    leads to the formation of the stabilized organic colloid, or organosol. The aim
    here is to demonstrate the entire chain of the transfer process in a continuous
    miniplant, which comprises particle synthesis, conditioning, and transfer, and
    which uses a drop column for extraction and as a transfer device. Based on the
    investigation of the governing principles and the material parameters, the results
    obtained for the transfer kinetics in the individual contact devices (centrifuge,
    single-drop column, and drop column for different operations) are used for the
    dimensioning of the entire process chain.
author:
- first_name: Jacqueline V.
  full_name: Erler, Jacqueline V.
  last_name: Erler
- first_name: Stefanie
  full_name: Machunsky, Stefanie
  last_name: Machunsky
- first_name: Steffen
  full_name: Franke, Steffen
  last_name: Franke
- first_name: Philipp
  full_name: Grimm, Philipp
  last_name: Grimm
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
- first_name: Urs A.
  full_name: Peuker, Urs A.
  last_name: Peuker
citation:
  ama: 'Erler JV, Machunsky S, Franke S, Grimm P, Schmid H-J, Peuker UA. Process Development
    of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality
    Organosols. In: <i>Colloid Process Engineering</i>. ; 2015. doi:<a href="https://doi.org/10.1007/978-3-319-15129-8_16">10.1007/978-3-319-15129-8_16</a>'
  apa: Erler, J. V., Machunsky, S., Franke, S., Grimm, P., Schmid, H.-J., &#38; Peuker,
    U. A. (2015). Process Development of a Liquid-Liquid Phase Transfer of Colloidal
    Particles for Production of High-Quality Organosols. In <i>Colloid Process Engineering</i>.
    <a href="https://doi.org/10.1007/978-3-319-15129-8_16">https://doi.org/10.1007/978-3-319-15129-8_16</a>
  bibtex: '@inbook{Erler_Machunsky_Franke_Grimm_Schmid_Peuker_2015, place={Cham},
    title={Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles
    for Production of High-Quality Organosols}, DOI={<a href="https://doi.org/10.1007/978-3-319-15129-8_16">10.1007/978-3-319-15129-8_16</a>},
    booktitle={Colloid Process Engineering}, author={Erler, Jacqueline V. and Machunsky,
    Stefanie and Franke, Steffen and Grimm, Philipp and Schmid, Hans-Joachim and Peuker,
    Urs A.}, year={2015} }'
  chicago: Erler, Jacqueline V., Stefanie Machunsky, Steffen Franke, Philipp Grimm,
    Hans-Joachim Schmid, and Urs A. Peuker. “Process Development of a Liquid-Liquid
    Phase Transfer of Colloidal Particles for Production of High-Quality Organosols.”
    In <i>Colloid Process Engineering</i>. Cham, 2015. <a href="https://doi.org/10.1007/978-3-319-15129-8_16">https://doi.org/10.1007/978-3-319-15129-8_16</a>.
  ieee: J. V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, and U. A. Peuker,
    “Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles
    for Production of High-Quality Organosols,” in <i>Colloid Process Engineering</i>,
    Cham, 2015.
  mla: Erler, Jacqueline V., et al. “Process Development of a Liquid-Liquid Phase
    Transfer of Colloidal Particles for Production of High-Quality Organosols.” <i>Colloid
    Process Engineering</i>, 2015, doi:<a href="https://doi.org/10.1007/978-3-319-15129-8_16">10.1007/978-3-319-15129-8_16</a>.
  short: 'J.V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, U.A. Peuker,
    in: Colloid Process Engineering, Cham, 2015.'
date_created: 2021-10-13T13:56:51Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.1007/978-3-319-15129-8_16
language:
- iso: eng
place: Cham
publication: Colloid Process Engineering
publication_status: published
status: public
title: Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles
  for Production of High-Quality Organosols
type: book_chapter
user_id: '70093'
year: '2015'
...
---
_id: '26121'
abstract:
- lang: eng
  text: The conditioning of the aerosol particle population into a bipolar charge
    equilibrium is an essential prerequisite to calculate the particle number size
    distribution using mobility particle size spectrometers. This is commonly realized
    by diffusion charging of bipolar air ions generated by e.g. a 85Kr source. Because
    of strict legal regulations on radioactive sources in several countries, soft-X-ray
    (SXR) appears as a suitable alternative. However, multiple measurements showed
    a systematical and significant difference between the particle charge distribution
    delivered by a radioactive source and an SXR charger, respectively. In this investigation,
    a calibrated particle charge distribution, suitable for the SXR chargers, was
    calculated based on the Fuchs model. An approximation analogous to the commonly
    used Wiedensohler approximation formula (Wiedensohler, 1988) was computed. The
    use of the new SXR approximation of the bipolar charge equilibrium for the inversion
    of an electrical mobility distribution to a particle number size distribution
    improves the comparability of these results, compared to measurements involving
    a 85Kr charger or to bipolar chargers using radioactive material in general. A
    systematic error in case of using the SXR charger could be eliminated and hence
    the root mean square deviation could be reduced from 13% using the common parameters
    for both charger types to 7% using the new SXR approximation for the SXR bipolar
    charger.
author:
- first_name: L.
  full_name: Tigges, L.
  last_name: Tigges
- first_name: A.
  full_name: Wiedensohler, A.
  last_name: Wiedensohler
- first_name: K.
  full_name: Weinhold, K.
  last_name: Weinhold
- first_name: J.
  full_name: Gandhi, J.
  last_name: Gandhi
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Tigges L, Wiedensohler A, Weinhold K, Gandhi J, Schmid H-J. Bipolar charge
    distribution of a soft X-ray diffusion charger. <i>Journal of Aerosol Science</i>.
    Published online 2015:77-86. doi:<a href="https://doi.org/10.1016/j.jaerosci.2015.07.002">10.1016/j.jaerosci.2015.07.002</a>
  apa: Tigges, L., Wiedensohler, A., Weinhold, K., Gandhi, J., &#38; Schmid, H.-J.
    (2015). Bipolar charge distribution of a soft X-ray diffusion charger. <i>Journal
    of Aerosol Science</i>, 77–86. <a href="https://doi.org/10.1016/j.jaerosci.2015.07.002">https://doi.org/10.1016/j.jaerosci.2015.07.002</a>
  bibtex: '@article{Tigges_Wiedensohler_Weinhold_Gandhi_Schmid_2015, title={Bipolar
    charge distribution of a soft X-ray diffusion charger}, DOI={<a href="https://doi.org/10.1016/j.jaerosci.2015.07.002">10.1016/j.jaerosci.2015.07.002</a>},
    journal={Journal of Aerosol Science}, author={Tigges, L. and Wiedensohler, A.
    and Weinhold, K. and Gandhi, J. and Schmid, Hans-Joachim}, year={2015}, pages={77–86}
    }'
  chicago: Tigges, L., A. Wiedensohler, K. Weinhold, J. Gandhi, and Hans-Joachim Schmid.
    “Bipolar Charge Distribution of a Soft X-Ray Diffusion Charger.” <i>Journal of
    Aerosol Science</i>, 2015, 77–86. <a href="https://doi.org/10.1016/j.jaerosci.2015.07.002">https://doi.org/10.1016/j.jaerosci.2015.07.002</a>.
  ieee: 'L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, and H.-J. Schmid, “Bipolar
    charge distribution of a soft X-ray diffusion charger,” <i>Journal of Aerosol
    Science</i>, pp. 77–86, 2015, doi: <a href="https://doi.org/10.1016/j.jaerosci.2015.07.002">10.1016/j.jaerosci.2015.07.002</a>.'
  mla: Tigges, L., et al. “Bipolar Charge Distribution of a Soft X-Ray Diffusion Charger.”
    <i>Journal of Aerosol Science</i>, 2015, pp. 77–86, doi:<a href="https://doi.org/10.1016/j.jaerosci.2015.07.002">10.1016/j.jaerosci.2015.07.002</a>.
  short: L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, H.-J. Schmid, Journal
    of Aerosol Science (2015) 77–86.
date_created: 2021-10-13T13:59:35Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.1016/j.jaerosci.2015.07.002
language:
- iso: eng
page: 77-86
publication: Journal of Aerosol Science
publication_identifier:
  issn:
  - 0021-8502
publication_status: published
status: public
title: Bipolar charge distribution of a soft X-ray diffusion charger
type: journal_article
user_id: '70093'
year: '2015'
...
---
_id: '26122'
abstract:
- lang: eng
  text: "An essential part of mobility particle size spectroscopy is the prediction
    of the aerosol charge distribution in a highly concentrated bipolar ion environment.
    This charge distribution can be readily calculated, but is depending on several
    environmental conditions. These influences are investigated theoretically.\r\n\r\nThe
    first part of this work deals with a sensitivity analysis using the Fuchs model
    (Fuchs, 1963) to determine the variation of the resulting charge distributions
    depending on the input parameters. It is demonstrated, that the main influencing
    variable is the difference between the positive and negative ion mobility. A sensitivity
    analysis reveals that a reasonable variation of the ion mobilities may lead to
    variations of the particle density distribution up to±20%.\r\n\r\nThe second part
    investigates the evolution of the charge distribution along the tubing downstream
    of the bipolar charger exit starting with equal ion concentrations for positive
    and negative ions. Due to wall losses depending on ion mobility a non-equilibrium
    charge distribution is developing along the plumbing. The evolution of the particle
    charge distribution is determined using a coupled population balance model. Even
    though the non-equilibrium character is clearly shown, it turns out that this
    effect is negligible at conditions typical for particle size measurements."
author:
- first_name: L.
  full_name: Tigges, L.
  last_name: Tigges
- first_name: A.
  full_name: Jain, A.
  last_name: Jain
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Tigges L, Jain A, Schmid H-J. On the bipolar charge distribution used for
    mobility particle sizing: Theoretical considerations. <i>Journal of Aerosol Science</i>.
    Published online 2015:119-134. doi:<a href="https://doi.org/10.1016/j.jaerosci.2015.05.010">10.1016/j.jaerosci.2015.05.010</a>'
  apa: 'Tigges, L., Jain, A., &#38; Schmid, H.-J. (2015). On the bipolar charge distribution
    used for mobility particle sizing: Theoretical considerations. <i>Journal of Aerosol
    Science</i>, 119–134. <a href="https://doi.org/10.1016/j.jaerosci.2015.05.010">https://doi.org/10.1016/j.jaerosci.2015.05.010</a>'
  bibtex: '@article{Tigges_Jain_Schmid_2015, title={On the bipolar charge distribution
    used for mobility particle sizing: Theoretical considerations}, DOI={<a href="https://doi.org/10.1016/j.jaerosci.2015.05.010">10.1016/j.jaerosci.2015.05.010</a>},
    journal={Journal of Aerosol Science}, author={Tigges, L. and Jain, A. and Schmid,
    Hans-Joachim}, year={2015}, pages={119–134} }'
  chicago: 'Tigges, L., A. Jain, and Hans-Joachim Schmid. “On the Bipolar Charge Distribution
    Used for Mobility Particle Sizing: Theoretical Considerations.” <i>Journal of
    Aerosol Science</i>, 2015, 119–34. <a href="https://doi.org/10.1016/j.jaerosci.2015.05.010">https://doi.org/10.1016/j.jaerosci.2015.05.010</a>.'
  ieee: 'L. Tigges, A. Jain, and H.-J. Schmid, “On the bipolar charge distribution
    used for mobility particle sizing: Theoretical considerations,” <i>Journal of
    Aerosol Science</i>, pp. 119–134, 2015, doi: <a href="https://doi.org/10.1016/j.jaerosci.2015.05.010">10.1016/j.jaerosci.2015.05.010</a>.'
  mla: 'Tigges, L., et al. “On the Bipolar Charge Distribution Used for Mobility Particle
    Sizing: Theoretical Considerations.” <i>Journal of Aerosol Science</i>, 2015,
    pp. 119–34, doi:<a href="https://doi.org/10.1016/j.jaerosci.2015.05.010">10.1016/j.jaerosci.2015.05.010</a>.'
  short: L. Tigges, A. Jain, H.-J. Schmid, Journal of Aerosol Science (2015) 119–134.
date_created: 2021-10-13T14:01:06Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.1016/j.jaerosci.2015.05.010
language:
- iso: eng
page: 119-134
publication: Journal of Aerosol Science
publication_identifier:
  issn:
  - 0021-8502
publication_status: published
status: public
title: 'On the bipolar charge distribution used for mobility particle sizing: Theoretical
  considerations'
type: journal_article
user_id: '70093'
year: '2015'
...
---
_id: '26123'
abstract:
- lang: eng
  text: "The precipitation of sticky and ultrafine particles has become increasingly
    important. Biomass burners are one important example for ultrafine dust emission
    sources with ever growing importance. Therefore, a baghouse filter has been developed,
    which combines excellent separation efficiency (> 99%, clean air dust loading
    of < 1 mg/m3) with convenience in operation. However, in order to prevent clogging
    of the filter cloth by sticky and ultrafine particles, it is necessary to use
    a precoat layer (e.g. hydrated limestone powder). If this technology is applied
    to larger scale processes, e.g. biomass burning for industrial drying processes,
    the reuse of the precoat material can generate significant savings.\r\n\r\nTherefore,
    extended tests on recycling of used precoat material have been performed. Particularly,
    the influence of precoat injection parameters and various mixing strategies of
    used and virgin powder for refreshing the precoat material have been investigated.
    Different mixtures have been characterised by their ability to disintegrate, flowability
    and filtration behaviour. It is clearly demonstrated that upon redispersing the
    used precoat fine dust mainly adheres to the coarse precoat with only a limited
    number of dust agglomerates being produced in addition. For each kind of precoat
    a minimum amount is determined in order to ensure a long-term stable process.
    This way a saving potential of between 40–67% has been found.\r\n\r\nAn economic
    and ecologic process has been developed to precipitate ultrafine dust in a baghouse
    filter system using precoat materials."
author:
- first_name: Sascha
  full_name: Schiller, Sascha
  last_name: Schiller
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Schiller S, Schmid H-J. Highly efficient filtration of ultrafine dust in baghouse
    filters using precoat materials. <i>Powder Technology</i>. Published online 2015:96-105.
    doi:<a href="https://doi.org/10.1016/j.powtec.2015.03.048">10.1016/j.powtec.2015.03.048</a>
  apa: Schiller, S., &#38; Schmid, H.-J. (2015). Highly efficient filtration of ultrafine
    dust in baghouse filters using precoat materials. <i>Powder Technology</i>, 96–105.
    <a href="https://doi.org/10.1016/j.powtec.2015.03.048">https://doi.org/10.1016/j.powtec.2015.03.048</a>
  bibtex: '@article{Schiller_Schmid_2015, title={Highly efficient filtration of ultrafine
    dust in baghouse filters using precoat materials}, DOI={<a href="https://doi.org/10.1016/j.powtec.2015.03.048">10.1016/j.powtec.2015.03.048</a>},
    journal={Powder Technology}, author={Schiller, Sascha and Schmid, Hans-Joachim},
    year={2015}, pages={96–105} }'
  chicago: Schiller, Sascha, and Hans-Joachim Schmid. “Highly Efficient Filtration
    of Ultrafine Dust in Baghouse Filters Using Precoat Materials.” <i>Powder Technology</i>,
    2015, 96–105. <a href="https://doi.org/10.1016/j.powtec.2015.03.048">https://doi.org/10.1016/j.powtec.2015.03.048</a>.
  ieee: 'S. Schiller and H.-J. Schmid, “Highly efficient filtration of ultrafine dust
    in baghouse filters using precoat materials,” <i>Powder Technology</i>, pp. 96–105,
    2015, doi: <a href="https://doi.org/10.1016/j.powtec.2015.03.048">10.1016/j.powtec.2015.03.048</a>.'
  mla: Schiller, Sascha, and Hans-Joachim Schmid. “Highly Efficient Filtration of
    Ultrafine Dust in Baghouse Filters Using Precoat Materials.” <i>Powder Technology</i>,
    2015, pp. 96–105, doi:<a href="https://doi.org/10.1016/j.powtec.2015.03.048">10.1016/j.powtec.2015.03.048</a>.
  short: S. Schiller, H.-J. Schmid, Powder Technology (2015) 96–105.
date_created: 2021-10-13T14:03:48Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.1016/j.powtec.2015.03.048
language:
- iso: eng
page: 96-105
publication: Powder Technology
publication_identifier:
  issn:
  - 0032-5910
publication_status: published
status: public
title: Highly efficient filtration of ultrafine dust in baghouse filters using precoat
  materials
type: journal_article
user_id: '70093'
year: '2015'
...
---
_id: '26124'
abstract:
- lang: eng
  text: Capillary forces between particles often dominate other adhesion forces. However,
    the calculation of the shape of capillary bridges and the resulting force is complex,
    so often assumptions and approximations are used. These assumptions are not useful
    for nanoscale particles. Therefore, a simulation method was established to calculate
    numerically the shape of the meniscus and derive the corresponding capillary bridge
    force. The main focus are nanoscaled particles with liquid bridges formed by condensing
    air humidity. The dependence of the capillary force on various parameters such
    as particle sizes, contact angle and humidity was investigated and it is demonstrated
    that often-used assumptions cannot be used for nanoscaled particles without remarkable
    mistake.
author:
- first_name: Michael
  full_name: Dörmann, Michael
  last_name: Dörmann
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Dörmann M, Schmid H-J. Simulation of Capillary Bridges between Particles. <i>Procedia
    Engineering</i>. Published online 2015:14-23. doi:<a href="https://doi.org/10.1016/j.proeng.2015.01.102">10.1016/j.proeng.2015.01.102</a>
  apa: Dörmann, M., &#38; Schmid, H.-J. (2015). Simulation of Capillary Bridges between
    Particles. <i>Procedia Engineering</i>, 14–23. <a href="https://doi.org/10.1016/j.proeng.2015.01.102">https://doi.org/10.1016/j.proeng.2015.01.102</a>
  bibtex: '@article{Dörmann_Schmid_2015, title={Simulation of Capillary Bridges between
    Particles}, DOI={<a href="https://doi.org/10.1016/j.proeng.2015.01.102">10.1016/j.proeng.2015.01.102</a>},
    journal={Procedia Engineering}, author={Dörmann, Michael and Schmid, Hans-Joachim},
    year={2015}, pages={14–23} }'
  chicago: Dörmann, Michael, and Hans-Joachim Schmid. “Simulation of Capillary Bridges
    between Particles.” <i>Procedia Engineering</i>, 2015, 14–23. <a href="https://doi.org/10.1016/j.proeng.2015.01.102">https://doi.org/10.1016/j.proeng.2015.01.102</a>.
  ieee: 'M. Dörmann and H.-J. Schmid, “Simulation of Capillary Bridges between Particles,”
    <i>Procedia Engineering</i>, pp. 14–23, 2015, doi: <a href="https://doi.org/10.1016/j.proeng.2015.01.102">10.1016/j.proeng.2015.01.102</a>.'
  mla: Dörmann, Michael, and Hans-Joachim Schmid. “Simulation of Capillary Bridges
    between Particles.” <i>Procedia Engineering</i>, 2015, pp. 14–23, doi:<a href="https://doi.org/10.1016/j.proeng.2015.01.102">10.1016/j.proeng.2015.01.102</a>.
  short: M. Dörmann, H.-J. Schmid, Procedia Engineering (2015) 14–23.
date_created: 2021-10-13T14:04:42Z
date_updated: 2022-01-06T06:57:16Z
doi: 10.1016/j.proeng.2015.01.102
language:
- iso: eng
page: 14-23
publication: Procedia Engineering
publication_identifier:
  issn:
  - 1877-7058
publication_status: published
status: public
title: Simulation of Capillary Bridges between Particles
type: journal_article
user_id: '70093'
year: '2015'
...