[{"keyword":["Mechanical joining","Aluminium","Self-piercing riveting","Casting","Microstructure","Joinability AlSi-alloys"],"language":[{"iso":"eng"}],"publication":"Journal of Manufacturing Processes","abstract":[{"text":"One of the major topics in the modern automotive industry is reducing emissions and increasing the mileage\r\nrange. To tackle this challenge, on the one hand, modifying the powertrain system is a possibility, and on the\r\nother hand, lightweight design offers various possibilities. Multi-Material Design (MMD) involves designing car\r\nbodies that combine different materials that require joining. Given the variety of materials, mechanical joining\r\nprocesses are preferred. Especially the current development of the Giga/Mega-casting process concerning\r\naluminium casting and the subsequent mechanical joining illustrates the challenges of this material group. In car\r\nproduction, aluminium castings are mainly made from aluminium-silicon (AlSi) alloys. Ultimately, the alloy\r\nsystem's insufficient ductility leads to crack initiation during mechanical joining. Cast parts are therefore often\r\nused in areas of the car body that are exposed to high-pressure loads. For example, self-piercing riveting (SPR) is\r\nused due to its high load-bearing capacity. In this study, improved joinability is demonstrated by influencing the\r\nmicrostructure through tailored solidification rates and a developed heat-treatment chain strategy adapted for\r\nhypoeutectic AlSi systems. Data on microstructure, mechanical, and joining properties are used to develop a\r\nsolidification-joining correlation for the SPR process across a range of Si contents and solidification rates. The\r\npurpose is to develop the ability to produce suitable aluminium castings with sufficient joinability, thereby\r\nimproving versatility.","lang":"eng"}],"publisher":"Elsevier","date_created":"2026-02-26T11:21:24Z","title":"Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR)","quality_controlled":"1","year":"2026","project":[{"name":"TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 - Project Area C","_id":"133"},{"_id":"136","name":"TRR 285 - Subproject A02"},{"_id":"146","name":"TRR 285 - Subproject C02"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"_id":"64678","user_id":"32340","department":[{"_id":"43"},{"_id":"158"},{"_id":"157"},{"_id":"321"}],"article_type":"original","funded_apc":"1","type":"journal_article","status":"public","date_updated":"2026-02-26T11:22:03Z","author":[{"id":"32340","full_name":"Neuser, Moritz","last_name":"Neuser","first_name":"Moritz"},{"full_name":"Kaimann, Pia Katharina","id":"44935","last_name":"Kaimann","first_name":"Pia Katharina"},{"full_name":"Stratmann, Ina","last_name":"Stratmann","first_name":"Ina"},{"first_name":"Mathias","full_name":"Bobbert, Mathias","id":"7850","last_name":"Bobbert"},{"last_name":"Klöckner","full_name":"Klöckner, Johann Moritz Benedikt","first_name":"Johann Moritz Benedikt"},{"first_name":"Moritz","full_name":"Mann, Moritz","last_name":"Mann"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"},{"first_name":"Mirko","id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper"}],"volume":164,"doi":"https://doi.org/10.1016/j.jmapro.2026.02.040","publication_status":"published","citation":{"ieee":"M. Neuser <i>et al.</i>, “Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR),” <i>Journal of Manufacturing Processes</i>, vol. 164, 2026, doi: <a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>.","chicago":"Neuser, Moritz, Pia Katharina Kaimann, Ina Stratmann, Mathias Bobbert, Johann Moritz Benedikt Klöckner, Moritz Mann, Kay-Peter Hoyer, Gerson Meschut, and Mirko Schaper. “Solidification-Joinability Correlation of Hypoeutectic Aluminium Casting Alloys for Self-Piercing Riveting (SPR).” <i>Journal of Manufacturing Processes</i> 164 (2026). <a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>.","apa":"Neuser, M., Kaimann, P. K., Stratmann, I., Bobbert, M., Klöckner, J. M. B., Mann, M., Hoyer, K.-P., Meschut, G., &#38; Schaper, M. (2026). Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR). <i>Journal of Manufacturing Processes</i>, <i>164</i>. <a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>","ama":"Neuser M, Kaimann PK, Stratmann I, et al. Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR). <i>Journal of Manufacturing Processes</i>. 2026;164. doi:<a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>","bibtex":"@article{Neuser_Kaimann_Stratmann_Bobbert_Klöckner_Mann_Hoyer_Meschut_Schaper_2026, title={Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR)}, volume={164}, DOI={<a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>}, journal={Journal of Manufacturing Processes}, publisher={Elsevier}, author={Neuser, Moritz and Kaimann, Pia Katharina and Stratmann, Ina and Bobbert, Mathias and Klöckner, Johann Moritz Benedikt and Mann, Moritz and Hoyer, Kay-Peter and Meschut, Gerson and Schaper, Mirko}, year={2026} }","short":"M. Neuser, P.K. Kaimann, I. Stratmann, M. Bobbert, J.M.B. Klöckner, M. Mann, K.-P. Hoyer, G. Meschut, M. Schaper, Journal of Manufacturing Processes 164 (2026).","mla":"Neuser, Moritz, et al. “Solidification-Joinability Correlation of Hypoeutectic Aluminium Casting Alloys for Self-Piercing Riveting (SPR).” <i>Journal of Manufacturing Processes</i>, vol. 164, Elsevier, 2026, doi:<a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>."},"intvolume":"       164"},{"abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>The contact between two partners can be determined using experimental or numerical methods. For the validation of numerical simulations, appropriate experiments and material models of the contact partners are required. Paper in combination with carbon paper can be used in experiments to detect the area of contact between contact partners. A simplified linear-elastic material model of paper for compression in the thickness direction was developed. To evaluate the material model, it was applied to an exemplary wheel-rail contact situation.</jats:p>"}],"status":"public","publication":"Journal of Tribology","type":"journal_article","language":[{"iso":"eng"}],"_id":"58378","department":[{"_id":"9"},{"_id":"158"}],"user_id":"48411","year":"2025","page":"1-19","citation":{"short":"I. Stratmann, K.-P. Hoyer, C. Schindler, Journal of Tribology (2025) 1–19.","mla":"Stratmann, Ina, et al. “Developing a Simplified Linear-Elastic Material Model for Carbon Paper Applied in the Rough Rail-Wheel Contact.” <i>Journal of Tribology</i>, ASME International, 2025, pp. 1–19, doi:<a href=\"https://doi.org/10.1115/1.4067696\">10.1115/1.4067696</a>.","bibtex":"@article{Stratmann_Hoyer_Schindler_2025, title={Developing a simplified linear-elastic material model for carbon paper applied in the rough rail-wheel contact}, DOI={<a href=\"https://doi.org/10.1115/1.4067696\">10.1115/1.4067696</a>}, journal={Journal of Tribology}, publisher={ASME International}, author={Stratmann, Ina and Hoyer, Kay-Peter and Schindler, Christian}, year={2025}, pages={1–19} }","apa":"Stratmann, I., Hoyer, K.-P., &#38; Schindler, C. (2025). Developing a simplified linear-elastic material model for carbon paper applied in the rough rail-wheel contact. <i>Journal of Tribology</i>, 1–19. <a href=\"https://doi.org/10.1115/1.4067696\">https://doi.org/10.1115/1.4067696</a>","chicago":"Stratmann, Ina, Kay-Peter Hoyer, and Christian Schindler. “Developing a Simplified Linear-Elastic Material Model for Carbon Paper Applied in the Rough Rail-Wheel Contact.” <i>Journal of Tribology</i>, 2025, 1–19. <a href=\"https://doi.org/10.1115/1.4067696\">https://doi.org/10.1115/1.4067696</a>.","ieee":"I. Stratmann, K.-P. Hoyer, and C. Schindler, “Developing a simplified linear-elastic material model for carbon paper applied in the rough rail-wheel contact,” <i>Journal of Tribology</i>, pp. 1–19, 2025, doi: <a href=\"https://doi.org/10.1115/1.4067696\">10.1115/1.4067696</a>.","ama":"Stratmann I, Hoyer K-P, Schindler C. Developing a simplified linear-elastic material model for carbon paper applied in the rough rail-wheel contact. <i>Journal of Tribology</i>. Published online 2025:1-19. doi:<a href=\"https://doi.org/10.1115/1.4067696\">10.1115/1.4067696</a>"},"publication_identifier":{"issn":["0742-4787","1528-8897"]},"quality_controlled":"1","publication_status":"published","title":"Developing a simplified linear-elastic material model for carbon paper applied in the rough rail-wheel contact","doi":"10.1115/1.4067696","date_updated":"2025-01-27T16:25:01Z","publisher":"ASME International","date_created":"2025-01-27T16:24:06Z","author":[{"first_name":"Ina","last_name":"Stratmann","full_name":"Stratmann, Ina"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Christian","last_name":"Schindler","full_name":"Schindler, Christian"}]},{"publication":"44th Conference of the International Deep Drawing Research Group (IDDRG 2025)","abstract":[{"text":"Lightweight design is a driving concept in modern automotive engineering to minimize resource consumption over a vehicle's lifecycle through multi-material design, which relies on the use of joining techniques in car body fabrication. Multi-material design and the increasing trend towards producing large structural components using the megacasting process pose considerable challenges, particularly in the mechanical joining of aluminium-silicon (AlSi) castings. These castings typically exhibit low ductility and are prone to cracking when mechanically joined. Based on the excellent castability of hypoeutectic AlSi alloys, these are applied in sand casting and die casting as well as in megacasting. With a silicon content between 7 wt% and 12 wt%, these AlSi-alloys have a plate-like silicon phase that initiates cracks during mechanical joining. To enhance the joinability of castings, the research hypothesis is that improved solidification conditions enable a significant modification in the microstructure and therefore, increase the mechanical properties. During the manufacture of the castings using the sand casting process, the solidification conditions within the structural elements are varied to modify the microstructure to obtain castings with graded microstructure. The castings are evaluated using mechanical, microstructural and joining testing methods and finally, a microstructure-joinability correlation is established.","lang":"eng"}],"language":[{"iso":"eng"}],"keyword":["Joining","Casting","Self-pierce riveting","Aluminium casting alloy"],"quality_controlled":"1","year":"2025","date_created":"2025-05-12T15:21:06Z","title":"Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys","type":"journal_article","status":"public","user_id":"7850","department":[{"_id":"43"},{"_id":"158"},{"_id":"157"},{"_id":"9"},{"_id":"321"}],"project":[{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"_id":"59872","article_number":"01081","article_type":"original","publication_status":"published","citation":{"apa":"Neuser, M., Schlichter, M. C., Hoyer, K.-P., Bobbert, M., Meschut, G., &#38; Schaper, M. (2025). Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys. <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i>, <i>408</i>, Article 01081. <a href=\"https://doi.org/10.1051/matecconf/202540801081\">https://doi.org/10.1051/matecconf/202540801081</a>","ama":"Neuser M, Schlichter MC, Hoyer K-P, Bobbert M, Meschut G, Schaper M. Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys. <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i>. 2025;408. doi:<a href=\"https://doi.org/10.1051/matecconf/202540801081\">10.1051/matecconf/202540801081</a>","mla":"Neuser, Moritz, et al. “Mechanical Joinability of Microstructurally Graded Structural Components Manufactured from Hypoeutectic Aluminium Casting Alloys.” <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i>, vol. 408, 01081, 2025, doi:<a href=\"https://doi.org/10.1051/matecconf/202540801081\">10.1051/matecconf/202540801081</a>.","bibtex":"@article{Neuser_Schlichter_Hoyer_Bobbert_Meschut_Schaper_2025, title={Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys}, volume={408}, DOI={<a href=\"https://doi.org/10.1051/matecconf/202540801081\">10.1051/matecconf/202540801081</a>}, number={01081}, journal={44th Conference of the International Deep Drawing Research Group (IDDRG 2025)}, author={Neuser, Moritz and Schlichter, Malte Christian and Hoyer, Kay-Peter and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko}, year={2025} }","short":"M. Neuser, M.C. Schlichter, K.-P. Hoyer, M. Bobbert, G. Meschut, M. Schaper, 44th Conference of the International Deep Drawing Research Group (IDDRG 2025) 408 (2025).","ieee":"M. Neuser, M. C. Schlichter, K.-P. Hoyer, M. Bobbert, G. Meschut, and M. Schaper, “Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys,” <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i>, vol. 408, Art. no. 01081, 2025, doi: <a href=\"https://doi.org/10.1051/matecconf/202540801081\">10.1051/matecconf/202540801081</a>.","chicago":"Neuser, Moritz, Malte Christian Schlichter, Kay-Peter Hoyer, Mathias Bobbert, Gerson Meschut, and Mirko Schaper. “Mechanical Joinability of Microstructurally Graded Structural Components Manufactured from Hypoeutectic Aluminium Casting Alloys.” <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i> 408 (2025). <a href=\"https://doi.org/10.1051/matecconf/202540801081\">https://doi.org/10.1051/matecconf/202540801081</a>."},"intvolume":"       408","author":[{"first_name":"Moritz","full_name":"Neuser, Moritz","id":"32340","last_name":"Neuser"},{"last_name":"Schlichter","id":"61977","full_name":"Schlichter, Malte Christian","first_name":"Malte Christian"},{"first_name":"Kay-Peter","last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter"},{"first_name":"Mathias","last_name":"Bobbert","full_name":"Bobbert, Mathias","id":"7850"},{"first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246"},{"full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper","first_name":"Mirko"}],"volume":408,"oa":"1","date_updated":"2026-02-24T13:41:58Z","main_file_link":[{"url":"\thttps://doi.org/10.1051/matecconf/202540801081","open_access":"1"}],"conference":{"name":"44th Conference of the International Deep Drawing Research Group (IDDRG 2025)","start_date":"2025-06-02","end_date":"2025-06-05","location":"Lissabon (Portugal)"},"doi":"10.1051/matecconf/202540801081"},{"language":[{"iso":"eng"}],"user_id":"48411","department":[{"_id":"9"},{"_id":"158"}],"_id":"58133","status":"public","type":"journal_article","publication":"Journal of Materials Engineering and Performance","doi":"10.1007/s11665-024-10618-z","title":"Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material","author":[{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"first_name":"Dennis","last_name":"Mileaege","full_name":"Mileaege, Dennis"},{"first_name":"Anatolii","id":"50215","full_name":"Andreiev, Anatolii","last_name":"Andreiev"},{"first_name":"Kay-Peter","last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"date_created":"2025-01-09T16:15:51Z","publisher":"Springer Science and Business Media LLC","date_updated":"2025-01-09T16:16:52Z","citation":{"ama":"Pramanik S, Mileaege D, Andreiev A, Hoyer K-P, Schaper M. Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material. <i>Journal of Materials Engineering and Performance</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1007/s11665-024-10618-z\">10.1007/s11665-024-10618-z</a>","chicago":"Pramanik, Sudipta, Dennis Mileaege, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous Material.” <i>Journal of Materials Engineering and Performance</i>, 2025. <a href=\"https://doi.org/10.1007/s11665-024-10618-z\">https://doi.org/10.1007/s11665-024-10618-z</a>.","ieee":"S. Pramanik, D. Mileaege, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material,” <i>Journal of Materials Engineering and Performance</i>, 2025, doi: <a href=\"https://doi.org/10.1007/s11665-024-10618-z\">10.1007/s11665-024-10618-z</a>.","short":"S. Pramanik, D. Mileaege, A. Andreiev, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance (2025).","mla":"Pramanik, Sudipta, et al. “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous Material.” <i>Journal of Materials Engineering and Performance</i>, Springer Science and Business Media LLC, 2025, doi:<a href=\"https://doi.org/10.1007/s11665-024-10618-z\">10.1007/s11665-024-10618-z</a>.","bibtex":"@article{Pramanik_Mileaege_Andreiev_Hoyer_Schaper_2025, title={Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material}, DOI={<a href=\"https://doi.org/10.1007/s11665-024-10618-z\">10.1007/s11665-024-10618-z</a>}, journal={Journal of Materials Engineering and Performance}, publisher={Springer Science and Business Media LLC}, author={Pramanik, Sudipta and Mileaege, Dennis and Andreiev, Anatolii and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025} }","apa":"Pramanik, S., Mileaege, D., Andreiev, A., Hoyer, K.-P., &#38; Schaper, M. (2025). Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material. <i>Journal of Materials Engineering and Performance</i>. <a href=\"https://doi.org/10.1007/s11665-024-10618-z\">https://doi.org/10.1007/s11665-024-10618-z</a>"},"year":"2025","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["1059-9495","1544-1024"]}},{"project":[{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"}],"_id":"58807","user_id":"32340","department":[{"_id":"43"},{"_id":"158"},{"_id":"157"},{"_id":"9"},{"_id":"321"}],"article_type":"original","type":"journal_article","status":"public","date_updated":"2025-02-24T12:25:04Z","author":[{"first_name":"Moritz","id":"32340","full_name":"Neuser, Moritz","last_name":"Neuser"},{"id":"44935","full_name":"Holtkamp, Pia Katharina","last_name":"Holtkamp","first_name":"Pia Katharina"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"last_name":"Kappe","full_name":"Kappe, Fabian","id":"66459","first_name":"Fabian"},{"first_name":"Safak","last_name":"Yildiz","full_name":"Yildiz, Safak"},{"first_name":"Mathias","id":"7850","full_name":"Bobbert, Mathias","last_name":"Bobbert"},{"full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"doi":"10.1177/14644207251319922","conference":{"name":"5th International Conference on Materials Design and Applications 2024","start_date":"2024-07-04","end_date":"2024-07-05","location":"Porto, Portugal"},"publication_status":"published","has_accepted_license":"1","citation":{"apa":"Neuser, M., Holtkamp, P. K., Hoyer, K.-P., Kappe, F., Yildiz, S., Bobbert, M., Meschut, G., &#38; Schaper, M. (2025). Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12. <i>The Journal of Materials: Design and Applications, Part L</i>. 5th International Conference on Materials Design and Applications 2024, Porto, Portugal. <a href=\"https://doi.org/10.1177/14644207251319922\">https://doi.org/10.1177/14644207251319922</a>","short":"M. Neuser, P.K. Holtkamp, K.-P. Hoyer, F. Kappe, S. Yildiz, M. Bobbert, G. Meschut, M. Schaper, The Journal of Materials: Design and Applications, Part L (2025).","bibtex":"@article{Neuser_Holtkamp_Hoyer_Kappe_Yildiz_Bobbert_Meschut_Schaper_2025, title={Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12}, DOI={<a href=\"https://doi.org/10.1177/14644207251319922\">10.1177/14644207251319922</a>}, journal={The Journal of Materials: Design and Applications, Part L}, publisher={Sage Publications}, author={Neuser, Moritz and Holtkamp, Pia Katharina and Hoyer, Kay-Peter and Kappe, Fabian and Yildiz, Safak and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko}, year={2025} }","mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of the Near-Eutectic Aluminium Casting Alloy AlSi12.” <i>The Journal of Materials: Design and Applications, Part L</i>, Sage Publications, 2025, doi:<a href=\"https://doi.org/10.1177/14644207251319922\">10.1177/14644207251319922</a>.","ama":"Neuser M, Holtkamp PK, Hoyer K-P, et al. Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12. <i>The Journal of Materials: Design and Applications, Part L</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1177/14644207251319922\">10.1177/14644207251319922</a>","chicago":"Neuser, Moritz, Pia Katharina Holtkamp, Kay-Peter Hoyer, Fabian Kappe, Safak Yildiz, Mathias Bobbert, Gerson Meschut, and Mirko Schaper. “Mechanical Properties and Joinability of the Near-Eutectic Aluminium Casting Alloy AlSi12.” <i>The Journal of Materials: Design and Applications, Part L</i>, 2025. <a href=\"https://doi.org/10.1177/14644207251319922\">https://doi.org/10.1177/14644207251319922</a>.","ieee":"M. Neuser <i>et al.</i>, “Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12,” <i>The Journal of Materials: Design and Applications, Part L</i>, 2025, doi: <a href=\"https://doi.org/10.1177/14644207251319922\">10.1177/14644207251319922</a>."},"keyword":["aluminium","casting","microstructure","joinability","self-piercing riveting"],"language":[{"iso":"eng"}],"publication":"The Journal of Materials: Design and Applications, Part L","abstract":[{"lang":"eng","text":"One of the most important strategies for reducing CO2 emissions in the mobility sector is lightweight construction. In particular, the car body offers several opportunities for weight reduction. Multi-material designs are increasingly being applied to select the most suitable material for the respective load and ultimately achieve synergy effects. For example, aluminium castings are used at the nodes of a spaceframe body. Subsequently, these are joined with profiles to form the bodyshell. To join different materials mechanical joining techniques, such as semi-tubular self-piercing riveting, are deployed. According to the current state of the art, cracks occur in the aluminium castings during the mechanical joining process as a result of the high degree of deformation. Although the aluminium casting alloys of the AlSi-system exhibit low ductility, these alloys reveal excellent castability. In particular, the ability to cast thin structural parts is enabled by the low liquidus point of the near eutectic aluminium casting alloys.\r\nThis study addresses the mechanical joining properties of the near eutectic aluminium casting alloy AlSi12, depending on different microstructures. These are achieved by annealing processes and modifying agents. Through an adapted heat treatment, the previously lamellar morphology can be transformed into a globular morphology, which leads to increased ductility and prevents the formation of cracks during the self-piercing riveting (SPR). The joinability is investigated using different die geometries, whereas the joint formation is analysed regarding crack initiation. To evaluate the increased ductility, microstructural and mechanical tests are performed and finally, a microstructure-joinability correlation is established."}],"publisher":"Sage Publications","date_created":"2025-02-24T10:25:31Z","title":"Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12","quality_controlled":"1","year":"2025"},{"language":[{"iso":"eng"}],"_id":"58950","user_id":"48411","department":[{"_id":"9"},{"_id":"158"}],"status":"public","type":"book_chapter","publication":"The Minerals, Metals &amp; Materials Series","title":"Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System","doi":"10.1007/978-3-031-81061-9_12","conference":{"start_date":"2025-03-23","name":"TMS 2025. The Minerals, Metals & Materials","location":"LAs Vegas, USA","end_date":"2025-03-27"},"date_updated":"2025-03-10T15:27:29Z","publisher":"Springer Nature Switzerland","author":[{"id":"84156","full_name":"Braun, Marcel Patrick Klaus","last_name":"Braun","first_name":"Marcel Patrick Klaus"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr"},{"last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411","first_name":"Kay-Peter"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"date_created":"2025-03-10T15:25:17Z","place":"Cham","year":"2025","citation":{"ama":"Braun MPK, Grydin O, Hoyer K-P, Schaper M. Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System. In: <i>The Minerals, Metals &#38;amp; Materials Series</i>. Springer Nature Switzerland; 2025. doi:<a href=\"https://doi.org/10.1007/978-3-031-81061-9_12\">10.1007/978-3-031-81061-9_12</a>","chicago":"Braun, Marcel Patrick Klaus, Olexandr Grydin, Kay-Peter Hoyer, and Mirko Schaper. “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System.” In <i>The Minerals, Metals &#38;amp; Materials Series</i>. Cham: Springer Nature Switzerland, 2025. <a href=\"https://doi.org/10.1007/978-3-031-81061-9_12\">https://doi.org/10.1007/978-3-031-81061-9_12</a>.","ieee":"M. P. K. Braun, O. Grydin, K.-P. Hoyer, and M. Schaper, “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System,” in <i>The Minerals, Metals &#38;amp; Materials Series</i>, Cham: Springer Nature Switzerland, 2025.","mla":"Braun, Marcel Patrick Klaus, et al. “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System.” <i>The Minerals, Metals &#38;amp; Materials Series</i>, Springer Nature Switzerland, 2025, doi:<a href=\"https://doi.org/10.1007/978-3-031-81061-9_12\">10.1007/978-3-031-81061-9_12</a>.","bibtex":"@inbook{Braun_Grydin_Hoyer_Schaper_2025, place={Cham}, title={Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System}, DOI={<a href=\"https://doi.org/10.1007/978-3-031-81061-9_12\">10.1007/978-3-031-81061-9_12</a>}, booktitle={The Minerals, Metals &#38;amp; Materials Series}, publisher={Springer Nature Switzerland}, author={Braun, Marcel Patrick Klaus and Grydin, Olexandr and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025} }","short":"M.P.K. Braun, O. Grydin, K.-P. Hoyer, M. Schaper, in: The Minerals, Metals &#38;amp; Materials Series, Springer Nature Switzerland, Cham, 2025.","apa":"Braun, M. P. K., Grydin, O., Hoyer, K.-P., &#38; Schaper, M. (2025). Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System. In <i>The Minerals, Metals &#38;amp; Materials Series</i>. TMS 2025. The Minerals, Metals &#38; Materials, LAs Vegas, USA. Springer Nature Switzerland. <a href=\"https://doi.org/10.1007/978-3-031-81061-9_12\">https://doi.org/10.1007/978-3-031-81061-9_12</a>"},"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2367-1181","2367-1696"],"isbn":["9783031810602","9783031810619"]}},{"doi":"10.21741/9781644903551-26","title":"Processing of the hypoeutectic AlSi9 alloy with twin-roll casting by using copper shells","volume":52,"date_created":"2025-03-26T15:15:15Z","author":[{"first_name":"Moritz","last_name":"Neuser","full_name":"Neuser, Moritz","id":"32340"},{"first_name":"Kay-Peter","id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"date_updated":"2025-03-26T15:17:46Z","publisher":"Materials Research Forum LLC","intvolume":"        52","citation":{"ama":"Neuser M, Hoyer K-P, Schaper M. Processing of the hypoeutectic AlSi9 alloy with twin-roll casting by using copper shells. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903551-26\">10.21741/9781644903551-26</a>","chicago":"Neuser, Moritz, Kay-Peter Hoyer, and Mirko Schaper. “Processing of the Hypoeutectic AlSi9 Alloy with Twin-Roll Casting by Using Copper Shells.” In <i>Materials Research Proceedings</i>, Vol. 52. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-26\">https://doi.org/10.21741/9781644903551-26</a>.","ieee":"M. Neuser, K.-P. Hoyer, and M. Schaper, “Processing of the hypoeutectic AlSi9 alloy with twin-roll casting by using copper shells,” in <i>Materials Research Proceedings</i>, 2025, vol. 52, doi: <a href=\"https://doi.org/10.21741/9781644903551-26\">10.21741/9781644903551-26</a>.","short":"M. Neuser, K.-P. Hoyer, M. Schaper, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","bibtex":"@inproceedings{Neuser_Hoyer_Schaper_2025, title={Processing of the hypoeutectic AlSi9 alloy with twin-roll casting by using copper shells}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-26\">10.21741/9781644903551-26</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Neuser, Moritz and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025} }","mla":"Neuser, Moritz, et al. “Processing of the Hypoeutectic AlSi9 Alloy with Twin-Roll Casting by Using Copper Shells.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903551-26\">10.21741/9781644903551-26</a>.","apa":"Neuser, M., Hoyer, K.-P., &#38; Schaper, M. (2025). Processing of the hypoeutectic AlSi9 alloy with twin-roll casting by using copper shells. <i>Materials Research Proceedings</i>, <i>52</i>. <a href=\"https://doi.org/10.21741/9781644903551-26\">https://doi.org/10.21741/9781644903551-26</a>"},"year":"2025","quality_controlled":"1","publication_identifier":{"issn":["2474-395X"]},"publication_status":"published","language":[{"iso":"eng"}],"department":[{"_id":"9"},{"_id":"158"}],"user_id":"48411","_id":"59154","status":"public","abstract":[{"lang":"eng","text":"<jats:p>Abstract. Lightweight design is one of the central topics of the automotive industry since reducing mass can save emissions over the entire life cycle of a component. Nowadays, vehicle structures usually consist of a multi-material design, which poses the additional challenge of joining these different materials. Mechanical joining is the most common way of joining different types of materials. Cast aluminium alloys of the AlSi system have a low ductility, which causes cracks during the mechanical joining process in the joint. One research approach is to achieve a fine microstructure by influencing the solidification rate since this results in increased mechanical properties, specifically the elongation at fracture and yield strength. A very fine microstructure can be achieved by utilizing Twin-roll casting (TRC) which is a continuous casting process in which high solidification rates of more than 100 K/s occur. In this study, the hypoeutectic cast aluminium alloy AlSi9 is processed in the TRC process using copper rollers. The cast strips are investigated regarding the microstructure-property correlation. A variation of the roller materials and cooling conditions allows for an increase in the solidification rate, whereby a defined, fine microstructure can be achieved, which enhances the mechanical properties of the hypoeutectic aluminium casting alloys.</jats:p>"}],"publication":"Materials Research Proceedings","type":"conference"},{"title":"Cost-effective repair solution for twin-roll-caster rollers","doi":"10.21741/9781644903551-5","date_updated":"2025-03-26T15:17:51Z","publisher":"Materials Research Forum LLC","volume":52,"date_created":"2025-03-26T15:16:31Z","author":[{"full_name":"Lauth, Martin","id":"13858","last_name":"Lauth","first_name":"Martin"},{"first_name":"Kay-Peter","last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"},{"full_name":"Gräfen, Winfried","last_name":"Gräfen","first_name":"Winfried"}],"year":"2025","intvolume":"        52","citation":{"apa":"Lauth, M., Hoyer, K.-P., Schaper, M., &#38; Gräfen, W. (2025). Cost-effective repair solution for twin-roll-caster rollers. <i>Materials Research Proceedings</i>, <i>52</i>. <a href=\"https://doi.org/10.21741/9781644903551-5\">https://doi.org/10.21741/9781644903551-5</a>","mla":"Lauth, Martin, et al. “Cost-Effective Repair Solution for Twin-Roll-Caster Rollers.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903551-5\">10.21741/9781644903551-5</a>.","short":"M. Lauth, K.-P. Hoyer, M. Schaper, W. Gräfen, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","bibtex":"@inproceedings{Lauth_Hoyer_Schaper_Gräfen_2025, title={Cost-effective repair solution for twin-roll-caster rollers}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-5\">10.21741/9781644903551-5</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Lauth, Martin and Hoyer, Kay-Peter and Schaper, Mirko and Gräfen, Winfried}, year={2025} }","ieee":"M. Lauth, K.-P. Hoyer, M. Schaper, and W. Gräfen, “Cost-effective repair solution for twin-roll-caster rollers,” in <i>Materials Research Proceedings</i>, 2025, vol. 52, doi: <a href=\"https://doi.org/10.21741/9781644903551-5\">10.21741/9781644903551-5</a>.","chicago":"Lauth, Martin, Kay-Peter Hoyer, Mirko Schaper, and Winfried Gräfen. “Cost-Effective Repair Solution for Twin-Roll-Caster Rollers.” In <i>Materials Research Proceedings</i>, Vol. 52. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-5\">https://doi.org/10.21741/9781644903551-5</a>.","ama":"Lauth M, Hoyer K-P, Schaper M, Gräfen W. Cost-effective repair solution for twin-roll-caster rollers. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903551-5\">10.21741/9781644903551-5</a>"},"publication_identifier":{"issn":["2474-395X"]},"quality_controlled":"1","publication_status":"published","language":[{"iso":"eng"}],"_id":"59155","department":[{"_id":"9"},{"_id":"158"}],"user_id":"48411","abstract":[{"lang":"eng","text":"<jats:p>Abstract. Twin-Roll-Casting (TRC) is an energy- and cost-efficient process to produce near-net-shape aluminum strips. Due to the high affinity of molten aluminum to steel surfaces, those rollers show signs of wear throughout the rolling campaign. This leads to the necessity of restoring the worn surfaces to suitable parameters. The easiest way is to grind the surface till all superficial defects are omitted. However, the thickness of the roller is not endless, therefore the rollers must be replaced after a certain amount of surface reconditioning. This ultimately leads to the non-usability of the roller. This research shows a route to recondition the surface including the possibility of renewing worn-down surfaces with an energy- and cost-efficient high-velocity oxygen fuel (HVOF) treatment with subsequent grinding to the desired initial surface parameters.</jats:p>"}],"status":"public","publication":"Materials Research Proceedings","type":"conference"},{"department":[{"_id":"9"},{"_id":"158"},{"_id":"321"}],"user_id":"48411","_id":"60851","language":[{"iso":"eng"}],"publication":"Journal of Materials Engineering and Performance","type":"journal_article","status":"public","date_created":"2025-07-31T12:30:19Z","author":[{"first_name":"Koustav","last_name":"Ghosh","full_name":"Ghosh, Koustav"},{"first_name":"Dennis","last_name":"Milaege","id":"35461","full_name":"Milaege, Dennis"},{"id":"69776","full_name":"Steinmeier, Paul","last_name":"Steinmeier","first_name":"Paul"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"first_name":"Kay-Peter","id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"},{"full_name":"Pramanik, Sudipta","last_name":"Pramanik","first_name":"Sudipta"}],"publisher":"Springer Science and Business Media LLC","date_updated":"2025-07-31T12:36:41Z","doi":"10.1007/s11665-025-11669-6","title":"Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures","publication_identifier":{"issn":["1059-9495","1544-1024"]},"quality_controlled":"1","publication_status":"published","citation":{"ieee":"K. Ghosh, D. Milaege, P. Steinmeier, M. Schaper, K.-P. Hoyer, and S. Pramanik, “Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures,” <i>Journal of Materials Engineering and Performance</i>, 2025, doi: <a href=\"https://doi.org/10.1007/s11665-025-11669-6\">10.1007/s11665-025-11669-6</a>.","chicago":"Ghosh, Koustav, Dennis Milaege, Paul Steinmeier, Mirko Schaper, Kay-Peter Hoyer, and Sudipta Pramanik. “Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures.” <i>Journal of Materials Engineering and Performance</i>, 2025. <a href=\"https://doi.org/10.1007/s11665-025-11669-6\">https://doi.org/10.1007/s11665-025-11669-6</a>.","apa":"Ghosh, K., Milaege, D., Steinmeier, P., Schaper, M., Hoyer, K.-P., &#38; Pramanik, S. (2025). Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures. <i>Journal of Materials Engineering and Performance</i>. <a href=\"https://doi.org/10.1007/s11665-025-11669-6\">https://doi.org/10.1007/s11665-025-11669-6</a>","ama":"Ghosh K, Milaege D, Steinmeier P, Schaper M, Hoyer K-P, Pramanik S. Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures. <i>Journal of Materials Engineering and Performance</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1007/s11665-025-11669-6\">10.1007/s11665-025-11669-6</a>","bibtex":"@article{Ghosh_Milaege_Steinmeier_Schaper_Hoyer_Pramanik_2025, title={Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures}, DOI={<a href=\"https://doi.org/10.1007/s11665-025-11669-6\">10.1007/s11665-025-11669-6</a>}, journal={Journal of Materials Engineering and Performance}, publisher={Springer Science and Business Media LLC}, author={Ghosh, Koustav and Milaege, Dennis and Steinmeier, Paul and Schaper, Mirko and Hoyer, Kay-Peter and Pramanik, Sudipta}, year={2025} }","short":"K. Ghosh, D. Milaege, P. Steinmeier, M. Schaper, K.-P. Hoyer, S. Pramanik, Journal of Materials Engineering and Performance (2025).","mla":"Ghosh, Koustav, et al. “Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures.” <i>Journal of Materials Engineering and Performance</i>, Springer Science and Business Media LLC, 2025, doi:<a href=\"https://doi.org/10.1007/s11665-025-11669-6\">10.1007/s11665-025-11669-6</a>."},"year":"2025"},{"article_number":"2402930","language":[{"iso":"eng"}],"_id":"62160","user_id":"66695","abstract":[{"lang":"eng","text":"<jats:p>Laser powder bed fusion is a cornerstone technology for additive manufacturing (AM) of metals and polymers, yet challenges in achieving consistent reproducibility and process optimization persist. Addressing these requires a systematic understanding of the interactions between feedstock, process parameters, and final part characteristics throughout the entire production chain. This study presents results from a comprehensive interlaboratory investigation conducted by 32 research institutions, evaluating six feedstock, including nanoparticle‐modified aluminum alloy and polyamide powders, under standardized protocols. Data analysis encompasses 69 powder properties, 15 process parameters per print, and 78 part features, culminating in a dataset of over 1.2 million correlations. Advanced statistical methods and machine learning are employed to identify critical variability drivers, such as the impact of nanoparticle modifications on powder flowability and thermal conductivity, as well as the influence of process parameters on reproducibility. Newly introduced dimensionless figures of merit provide universal metrics to describe and predict thermal and mechanical interactions, simplifying process optimization and material characterization. The findings, supported by an open‐access dataset adhering to findable, accessible, interoperable, and reusable principles, advance understanding of material–process–structure–property relationships. They establish a benchmark for future research and lay the foundation for improving the reliability, quality, and sustainability of AM processes.</jats:p>"}],"status":"public","type":"journal_article","publication":"Advanced Engineering Materials","title":"Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers","doi":"10.1002/adem.202402930","date_updated":"2025-11-10T15:05:59Z","publisher":"Wiley","author":[{"first_name":"Ihsan Murat","full_name":"Kuşoğlu, Ihsan Murat","last_name":"Kuşoğlu"},{"first_name":"Sunidhi","full_name":"Garg, Sunidhi","last_name":"Garg"},{"full_name":"Abel, Arvid","last_name":"Abel","first_name":"Arvid"},{"full_name":"Balachandran, Prasanna V.","last_name":"Balachandran","first_name":"Prasanna V."},{"first_name":"Stephan","full_name":"Barcikowski, Stephan","last_name":"Barcikowski"},{"full_name":"Becker, Louis","last_name":"Becker","first_name":"Louis"},{"first_name":"Jan-Simeon","last_name":"Bernsmann","full_name":"Bernsmann, Jan-Simeon"},{"full_name":"Boseila, Jonas","last_name":"Boseila","first_name":"Jonas"},{"first_name":"Christoph","full_name":"Broeckmann, Christoph","last_name":"Broeckmann"},{"first_name":"Mert","full_name":"Coskun, Mert","last_name":"Coskun"},{"first_name":"Malte","full_name":"Dreyer, Malte","id":"66695","orcid":"0000-0001-9560-9510","last_name":"Dreyer"},{"first_name":"Mark","last_name":"East","full_name":"East, Mark"},{"first_name":"Mark","full_name":"Easton, Mark","last_name":"Easton"},{"first_name":"Nils","last_name":"Ellendt","full_name":"Ellendt, Nils"},{"last_name":"Gann","full_name":"Gann, Stan","first_name":"Stan"},{"first_name":"Bilal","full_name":"Gökce, Bilal","last_name":"Gökce"},{"first_name":"Mareen","last_name":"Goßling","full_name":"Goßling, Mareen"},{"full_name":"Greiner, Joachim","last_name":"Greiner","first_name":"Joachim"},{"last_name":"Gruber","full_name":"Gruber, Piotr","first_name":"Piotr"},{"first_name":"Moritz","last_name":"Grünewald","full_name":"Grünewald, Moritz"},{"first_name":"Kopila","full_name":"Gurung, Kopila","last_name":"Gurung"},{"first_name":"Nick","full_name":"Hantke, Nick","last_name":"Hantke"},{"full_name":"Hengsbach, Florian","id":"14073","last_name":"Hengsbach","first_name":"Florian"},{"first_name":"Hannes","last_name":"Holländer","full_name":"Holländer, Hannes"},{"last_name":"Van Hooreweder","full_name":"Van Hooreweder, Brecht","first_name":"Brecht"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Yajiang","last_name":"Huang","full_name":"Huang, Yajiang"},{"first_name":"Florian","full_name":"Huber, Florian","last_name":"Huber"},{"first_name":"Olaf","last_name":"Kessler","full_name":"Kessler, Olaf"},{"full_name":"Kısasöz, Burçin Özbay","last_name":"Kısasöz","first_name":"Burçin Özbay"},{"first_name":"Stefan","last_name":"Kleszczynski","full_name":"Kleszczynski, Stefan"},{"full_name":"Koc, Ebubekir","last_name":"Koc","first_name":"Ebubekir"},{"full_name":"Kurzynowski, Tomasz","last_name":"Kurzynowski","first_name":"Tomasz"},{"first_name":"Arno","full_name":"Kwade, Arno","last_name":"Kwade"},{"first_name":"Simon","last_name":"Leupold","full_name":"Leupold, Simon"},{"full_name":"Liu, Dongmei","last_name":"Liu","first_name":"Dongmei"},{"last_name":"Lomo","full_name":"Lomo, Felix","first_name":"Felix"},{"first_name":"Arne","last_name":"Lüddecke","full_name":"Lüddecke, Arne"},{"full_name":"Luinstra, Gerrit A.","last_name":"Luinstra","first_name":"Gerrit A."},{"first_name":"David A.","full_name":"Mauchline, David A.","last_name":"Mauchline"},{"full_name":"Meyer, Fabian","last_name":"Meyer","first_name":"Fabian"},{"last_name":"Meyer","full_name":"Meyer, Lars","first_name":"Lars"},{"last_name":"Middendorf","full_name":"Middendorf, Peter","first_name":"Peter"},{"full_name":"Nolte, Stefan","last_name":"Nolte","first_name":"Stefan"},{"full_name":"Olejarczyk, Michał","last_name":"Olejarczyk","first_name":"Michał"},{"first_name":"Ludger","last_name":"Overmeyer","full_name":"Overmeyer, Ludger"},{"last_name":"Pich","full_name":"Pich, Andrij","first_name":"Andrij"},{"first_name":"Sebastian","full_name":"Platt, Sebastian","last_name":"Platt"},{"last_name":"Radtke","full_name":"Radtke, Felix","first_name":"Felix"},{"full_name":"Ramm, Roland","last_name":"Ramm","first_name":"Roland"},{"first_name":"Silja-Katharina","last_name":"Rittinghaus","full_name":"Rittinghaus, Silja-Katharina"},{"first_name":"Richard","last_name":"Rothfelder","full_name":"Rothfelder, Richard"},{"full_name":"Rudloff, Johannes","last_name":"Rudloff","first_name":"Johannes"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"first_name":"Marie Luise","last_name":"Scheck","full_name":"Scheck, Marie Luise"},{"first_name":"Johannes Henrich","full_name":"Schleifenbaum, Johannes Henrich","last_name":"Schleifenbaum"},{"first_name":"Michael","full_name":"Schmidt, Michael","last_name":"Schmidt"},{"full_name":"Sehrt, Jan T.","last_name":"Sehrt","first_name":"Jan T."},{"first_name":"Yvonne P.","full_name":"Shabanga, Yvonne P.","last_name":"Shabanga"},{"last_name":"Sommereyns","full_name":"Sommereyns, Alexander","first_name":"Alexander"},{"first_name":"Rabea","last_name":"Steuer","full_name":"Steuer, Rabea"},{"last_name":"Tisha","full_name":"Tisha, Layla Shams","first_name":"Layla Shams"},{"first_name":"Anastasiya","full_name":"Toenjes, Anastasiya","last_name":"Toenjes"},{"first_name":"Christopher","last_name":"Tuck","full_name":"Tuck, Christopher"},{"first_name":"Adrian","last_name":"Vaghar","full_name":"Vaghar, Adrian"},{"last_name":"Vrancken","full_name":"Vrancken, Bey","first_name":"Bey"},{"first_name":"Zhengze","last_name":"Wang","full_name":"Wang, Zhengze"},{"first_name":"Sebastian","last_name":"Weber","full_name":"Weber, Sebastian"},{"first_name":"Jan","last_name":"Wegner","full_name":"Wegner, Jan"},{"first_name":"Bai-Xiang","last_name":"Xu","full_name":"Xu, Bai-Xiang"},{"full_name":"Yang, Yangyiwei","last_name":"Yang","first_name":"Yangyiwei"},{"last_name":"Zhang","full_name":"Zhang, Duyao","first_name":"Duyao"},{"full_name":"Zhuravlev, Evgeny","last_name":"Zhuravlev","first_name":"Evgeny"},{"first_name":"Anna R.","full_name":"Ziefuss, Anna R.","last_name":"Ziefuss"}],"date_created":"2025-11-10T14:56:57Z","volume":27,"year":"2025","citation":{"apa":"Kuşoğlu, I. M., Garg, S., Abel, A., Balachandran, P. V., Barcikowski, S., Becker, L., Bernsmann, J.-S., Boseila, J., Broeckmann, C., Coskun, M., Dreyer, M., East, M., Easton, M., Ellendt, N., Gann, S., Gökce, B., Goßling, M., Greiner, J., Gruber, P., … Ziefuss, A. R. (2025). Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers. <i>Advanced Engineering Materials</i>, <i>27</i>(14), Article 2402930. <a href=\"https://doi.org/10.1002/adem.202402930\">https://doi.org/10.1002/adem.202402930</a>","short":"I.M. Kuşoğlu, S. Garg, A. Abel, P.V. Balachandran, S. Barcikowski, L. Becker, J.-S. Bernsmann, J. Boseila, C. Broeckmann, M. Coskun, M. Dreyer, M. East, M. Easton, N. Ellendt, S. Gann, B. Gökce, M. Goßling, J. Greiner, P. Gruber, M. Grünewald, K. Gurung, N. Hantke, F. Hengsbach, H. Holländer, B. Van Hooreweder, K.-P. Hoyer, Y. Huang, F. Huber, O. Kessler, B.Ö. Kısasöz, S. Kleszczynski, E. Koc, T. Kurzynowski, A. Kwade, S. Leupold, D. Liu, F. Lomo, A. Lüddecke, G.A. Luinstra, D.A. Mauchline, F. Meyer, L. Meyer, P. Middendorf, S. Nolte, M. Olejarczyk, L. Overmeyer, A. Pich, S. Platt, F. Radtke, R. Ramm, S.-K. Rittinghaus, R. Rothfelder, J. Rudloff, M. Schaper, M.L. Scheck, J.H. Schleifenbaum, M. Schmidt, J.T. Sehrt, Y.P. Shabanga, A. Sommereyns, R. Steuer, L.S. Tisha, A. Toenjes, C. Tuck, A. Vaghar, B. Vrancken, Z. Wang, S. Weber, J. Wegner, B.-X. Xu, Y. Yang, D. Zhang, E. Zhuravlev, A.R. Ziefuss, Advanced Engineering Materials 27 (2025).","mla":"Kuşoğlu, Ihsan Murat, et al. “Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers.” <i>Advanced Engineering Materials</i>, vol. 27, no. 14, 2402930, Wiley, 2025, doi:<a href=\"https://doi.org/10.1002/adem.202402930\">10.1002/adem.202402930</a>.","bibtex":"@article{Kuşoğlu_Garg_Abel_Balachandran_Barcikowski_Becker_Bernsmann_Boseila_Broeckmann_Coskun_et al._2025, title={Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers}, volume={27}, DOI={<a href=\"https://doi.org/10.1002/adem.202402930\">10.1002/adem.202402930</a>}, number={142402930}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Kuşoğlu, Ihsan Murat and Garg, Sunidhi and Abel, Arvid and Balachandran, Prasanna V. and Barcikowski, Stephan and Becker, Louis and Bernsmann, Jan-Simeon and Boseila, Jonas and Broeckmann, Christoph and Coskun, Mert and et al.}, year={2025} }","chicago":"Kuşoğlu, Ihsan Murat, Sunidhi Garg, Arvid Abel, Prasanna V. Balachandran, Stephan Barcikowski, Louis Becker, Jan-Simeon Bernsmann, et al. “Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers.” <i>Advanced Engineering Materials</i> 27, no. 14 (2025). <a href=\"https://doi.org/10.1002/adem.202402930\">https://doi.org/10.1002/adem.202402930</a>.","ieee":"I. M. Kuşoğlu <i>et al.</i>, “Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers,” <i>Advanced Engineering Materials</i>, vol. 27, no. 14, Art. no. 2402930, 2025, doi: <a href=\"https://doi.org/10.1002/adem.202402930\">10.1002/adem.202402930</a>.","ama":"Kuşoğlu IM, Garg S, Abel A, et al. Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers. <i>Advanced Engineering Materials</i>. 2025;27(14). doi:<a href=\"https://doi.org/10.1002/adem.202402930\">10.1002/adem.202402930</a>"},"intvolume":"        27","publication_status":"published","publication_identifier":{"issn":["1438-1656","1527-2648"]},"issue":"14"},{"title":"Surface functionalisation of additively manufactured AlSi10Mg by organophosphonic acid and PDMS grafting","doi":"10.1016/j.matchemphys.2025.131758","publisher":"Elsevier BV","date_updated":"2025-11-12T07:34:26Z","author":[{"last_name":"Prüßner","full_name":"Prüßner, Tim","first_name":"Tim"},{"last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"id":"1449","full_name":"Buitkamp, Nadine","last_name":"Buitkamp","first_name":"Nadine"},{"last_name":"Vieth","full_name":"Vieth, Pascal","first_name":"Pascal"},{"full_name":"Grundmeier, Guido","id":"194","last_name":"Grundmeier","first_name":"Guido"}],"date_created":"2025-11-12T07:33:04Z","volume":349,"year":"2025","citation":{"chicago":"Prüßner, Tim, Kay-Peter Hoyer, Nadine Buitkamp, Pascal Vieth, and Guido Grundmeier. “Surface Functionalisation of Additively Manufactured AlSi10Mg by Organophosphonic Acid and PDMS Grafting.” <i>Materials Chemistry and Physics</i> 349 (2025). <a href=\"https://doi.org/10.1016/j.matchemphys.2025.131758\">https://doi.org/10.1016/j.matchemphys.2025.131758</a>.","ieee":"T. Prüßner, K.-P. Hoyer, N. Buitkamp, P. Vieth, and G. Grundmeier, “Surface functionalisation of additively manufactured AlSi10Mg by organophosphonic acid and PDMS grafting,” <i>Materials Chemistry and Physics</i>, vol. 349, Art. no. 131758, 2025, doi: <a href=\"https://doi.org/10.1016/j.matchemphys.2025.131758\">10.1016/j.matchemphys.2025.131758</a>.","ama":"Prüßner T, Hoyer K-P, Buitkamp N, Vieth P, Grundmeier G. Surface functionalisation of additively manufactured AlSi10Mg by organophosphonic acid and PDMS grafting. <i>Materials Chemistry and Physics</i>. 2025;349. doi:<a href=\"https://doi.org/10.1016/j.matchemphys.2025.131758\">10.1016/j.matchemphys.2025.131758</a>","short":"T. Prüßner, K.-P. Hoyer, N. Buitkamp, P. Vieth, G. Grundmeier, Materials Chemistry and Physics 349 (2025).","mla":"Prüßner, Tim, et al. “Surface Functionalisation of Additively Manufactured AlSi10Mg by Organophosphonic Acid and PDMS Grafting.” <i>Materials Chemistry and Physics</i>, vol. 349, 131758, Elsevier BV, 2025, doi:<a href=\"https://doi.org/10.1016/j.matchemphys.2025.131758\">10.1016/j.matchemphys.2025.131758</a>.","bibtex":"@article{Prüßner_Hoyer_Buitkamp_Vieth_Grundmeier_2025, title={Surface functionalisation of additively manufactured AlSi10Mg by organophosphonic acid and PDMS grafting}, volume={349}, DOI={<a href=\"https://doi.org/10.1016/j.matchemphys.2025.131758\">10.1016/j.matchemphys.2025.131758</a>}, number={131758}, journal={Materials Chemistry and Physics}, publisher={Elsevier BV}, author={Prüßner, Tim and Hoyer, Kay-Peter and Buitkamp, Nadine and Vieth, Pascal and Grundmeier, Guido}, year={2025} }","apa":"Prüßner, T., Hoyer, K.-P., Buitkamp, N., Vieth, P., &#38; Grundmeier, G. (2025). Surface functionalisation of additively manufactured AlSi10Mg by organophosphonic acid and PDMS grafting. <i>Materials Chemistry and Physics</i>, <i>349</i>, Article 131758. <a href=\"https://doi.org/10.1016/j.matchemphys.2025.131758\">https://doi.org/10.1016/j.matchemphys.2025.131758</a>"},"intvolume":"       349","publication_status":"published","publication_identifier":{"issn":["0254-0584"]},"quality_controlled":"1","article_number":"131758","language":[{"iso":"eng"}],"_id":"62166","user_id":"48411","department":[{"_id":"9"},{"_id":"158"},{"_id":"321"}],"status":"public","type":"journal_article","publication":"Materials Chemistry and Physics"},{"publication":"Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen","abstract":[{"lang":"ger","text":"Aluminium-Silizium-Legierungen (AlSi) werden insbesondere bei der gießtechnischen\r\nHerstellung von Leichtbaukomponenten für Fahrzeuge verwendet. Dieses Legierungssystem hat hervorragende\r\nGießeigenschaften bei gleichzeitig akzeptablen mechanischen Eigenschaften. Aufgrund des hohen\r\nSilizium-(Si)-Gehaltes, wodurch die Volumenkontraktion im Phasenübergang von flüssig-fest nahezu\r\nunterbunden wird, neigen AlSi-Legierungen dazu, feinere oder gröbere Si-Platten bei unterschiedlichen\r\nErstarrungsgeschwindigkeiten zu bilden. Um die mechanischen Eigenschaften zu verbessern, werden\r\ndem Legierungssystem in der Schmelzphase entweder Natrium (Na) oder Strontium (Sr) zugesetzt. Dies\r\nhat zur Folge, dass sich eine fein lamellare Si-Morphologie bei der Erstarrung ausbildet; dies kann ebenfalls\r\ndurch hohe Erstarrungsgeschwindigkeiten erreicht werden. Ein nachfolgendes Lösungsglühen bewirkt\r\neine Sphäroidisierung der Si-Partikel und dient der Steigerung der Duktilität. Aktuell fehlen fundierte\r\nErkenntnisse zur Ausprägung der Si-Morphologie in Abhängigkeit der Erstarrungsgeschwindigkeit oder\r\ninfolge einer Wärmebehandlung. Vor diesem Hintergrund werden in dieser Studie verschiedene Behandlungsparameter\r\nin Bezug auf das Einformverhalten der Si-Partikel mit einem bildauswertenden Verfahren\r\nevaluiert sowie unter Bezug auf verschiedene chemische Zusammensetzungen miteinander korreliert."},{"lang":"eng","text":"Aluminium-silicon alloys (AlSi) are used in the casting of lightweight vehicle components. This\r\nalloy system has excellent casting properties accompanied by acceptable mechanical properties. Due to\r\nthe high silicon (Si) content, which almost completely prevents volume contraction during the liquid-solid\r\nphase transition, AlSi alloys tend to form finer or coarser Si plates at different solidification rates. To\r\nimprove the mechanical properties, either sodium (Na) or strontium (Sr) is added to the alloy system in\r\nthe melting phase. This results in the formation of a fine lamellar Si morphology during solidification, which\r\ncan also be achieved by high solidification rates. Subsequent solution annealing causes spheroidisation\r\nof the Si particles and increases ductility. Currently, there is a lack in scientific knowledge regarding the\r\nSi-morphology as a function of solidification rate or as a result of heat treatment. Therefore, this study\r\nevaluates various treatment parameters in relation to the shaping behaviour of Si particles using an image\r\nanalysis method and correlates them with different chemical compositions."}],"language":[{"iso":"ger"}],"keyword":["Bildauswertendes Verfahren","Mikrostrukturanalyse","AlSi-System","Si-Morphologie"],"quality_controlled":"1","year":"2025","date_created":"2025-12-01T13:46:42Z","publisher":"Deutsche Gesellschaft für Materialkunde (DGM)","title":"Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen","type":"conference","status":"public","user_id":"32340","department":[{"_id":"43"},{"_id":"9"},{"_id":"158"},{"_id":"321"}],"project":[{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"},{"name":"TRR 285 - Project Area A","_id":"131"},{"_id":"136","name":"TRR 285 - Subproject A02"}],"_id":"62725","alternative_title":["Image analysis method for evaluating the microstructure of AlSi-alloys"],"publication_status":"published","publication_identifier":{"isbn":["978-3-88355-454-9"]},"citation":{"ieee":"M. Neuser, G. Cichon, K.-P. Hoyer, and M. Schaper, “Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen,” in <i>Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen</i>, Dresden, 2025, vol. 43, pp. 454–459.","chicago":"Neuser, Moritz, Gerrit Cichon, Kay-Peter Hoyer, and Mirko Schaper. “Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen.” In <i>Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen</i>, 43:454–59. Sankt Augustin: Deutsche Gesellschaft für Materialkunde (DGM), 2025.","ama":"Neuser M, Cichon G, Hoyer K-P, Schaper M. Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen. In: <i>Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen</i>. Vol 43. Deutsche Gesellschaft für Materialkunde (DGM); 2025:454-459.","apa":"Neuser, M., Cichon, G., Hoyer, K.-P., &#38; Schaper, M. (2025). Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen. <i>Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen</i>, <i>43</i>, 454–459.","bibtex":"@inproceedings{Neuser_Cichon_Hoyer_Schaper_2025, place={Sankt Augustin}, title={Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen}, volume={43}, booktitle={Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen}, publisher={Deutsche Gesellschaft für Materialkunde (DGM)}, author={Neuser, Moritz and Cichon, Gerrit and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025}, pages={454–459} }","mla":"Neuser, Moritz, et al. “Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen.” <i>Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen</i>, vol. 43, Deutsche Gesellschaft für Materialkunde (DGM), 2025, pp. 454–59.","short":"M. Neuser, G. Cichon, K.-P. Hoyer, M. Schaper, in: Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen, Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 2025, pp. 454–459."},"page":"454 - 459","intvolume":"        43","place":"Sankt Augustin","author":[{"first_name":"Moritz","last_name":"Neuser","id":"32340","full_name":"Neuser, Moritz"},{"last_name":"Cichon","full_name":"Cichon, Gerrit","first_name":"Gerrit"},{"last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411","first_name":"Kay-Peter"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"volume":43,"date_updated":"2025-12-01T13:46:53Z","conference":{"end_date":"2025-11-28","location":"Dresden","name":"Werkstoffprüfung - 43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025","start_date":"2025-11-27"}},{"year":"2024","quality_controlled":"1","issue":"2","title":"Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion","publisher":"MDPI AG","date_created":"2024-03-22T13:46:37Z","abstract":[{"text":"<jats:p>Through tailoring the geometry and design of biomaterials, additive manufacturing is revolutionizing the production of metallic patient-specific implants, e.g., the Ti-6Al-7Nb alloy. Unfortunately, studies investigating this alloy showed that additively produced samples exhibit anisotropic microstructures. This anisotropy compromises the mechanical properties and complicates the loading state in the implant. Moreover, the minimum requirements as specified per designated standards such as ISO 5832-11 are not met. The remedy to this problem is performing a conventional heat treatment. As this route requires energy, infrastructure, labor, and expertise, which in turn mean time and money, many of the additive manufacturing benefits are negated. Thus, the goal of this work was to achieve better isotropy by applying only adapted additive manufacturing process parameters, specifically focusing on the build orientations. In this work, samples orientated in 90°, 45°, and 0° directions relative to the building platform were manufactured and tested. These tests included mechanical (tensile and fatigue tests) as well as microstructural analyses (SEM and EBSD). Subsequently, the results of these tests such as fractography were correlated with the acquired mechanical properties. These showed that 90°-aligned samples performed best under fatigue load and that all requirements specified by the standard regarding monotonic load were met.</jats:p>","lang":"eng"}],"publication":"Crystals","keyword":["Inorganic Chemistry","Condensed Matter Physics","General Materials Science","General Chemical Engineering"],"language":[{"iso":"eng"}],"intvolume":"        14","citation":{"ama":"Milaege D, Eschemann N, Hoyer K-P, Schaper M. Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion. <i>Crystals</i>. 2024;14(2). doi:<a href=\"https://doi.org/10.3390/cryst14020117\">10.3390/cryst14020117</a>","chicago":"Milaege, Dennis, Niklas Eschemann, Kay-Peter Hoyer, and Mirko Schaper. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” <i>Crystals</i> 14, no. 2 (2024). <a href=\"https://doi.org/10.3390/cryst14020117\">https://doi.org/10.3390/cryst14020117</a>.","ieee":"D. Milaege, N. Eschemann, K.-P. Hoyer, and M. Schaper, “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion,” <i>Crystals</i>, vol. 14, no. 2, Art. no. 117, 2024, doi: <a href=\"https://doi.org/10.3390/cryst14020117\">10.3390/cryst14020117</a>.","apa":"Milaege, D., Eschemann, N., Hoyer, K.-P., &#38; Schaper, M. (2024). Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion. <i>Crystals</i>, <i>14</i>(2), Article 117. <a href=\"https://doi.org/10.3390/cryst14020117\">https://doi.org/10.3390/cryst14020117</a>","bibtex":"@article{Milaege_Eschemann_Hoyer_Schaper_2024, title={Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion}, volume={14}, DOI={<a href=\"https://doi.org/10.3390/cryst14020117\">10.3390/cryst14020117</a>}, number={2117}, journal={Crystals}, publisher={MDPI AG}, author={Milaege, Dennis and Eschemann, Niklas and Hoyer, Kay-Peter and Schaper, Mirko}, year={2024} }","mla":"Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” <i>Crystals</i>, vol. 14, no. 2, 117, MDPI AG, 2024, doi:<a href=\"https://doi.org/10.3390/cryst14020117\">10.3390/cryst14020117</a>.","short":"D. Milaege, N. Eschemann, K.-P. Hoyer, M. Schaper, Crystals 14 (2024)."},"publication_identifier":{"issn":["2073-4352"]},"publication_status":"published","doi":"10.3390/cryst14020117","date_updated":"2024-03-22T14:22:36Z","volume":14,"author":[{"id":"35461","full_name":"Milaege, Dennis","last_name":"Milaege","first_name":"Dennis"},{"last_name":"Eschemann","full_name":"Eschemann, Niklas","first_name":"Niklas"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"status":"public","type":"journal_article","article_number":"117","_id":"52738","department":[{"_id":"158"},{"_id":"321"}],"user_id":"35461"},{"language":[{"iso":"eng"}],"user_id":"48411","department":[{"_id":"9"},{"_id":"158"},{"_id":"321"}],"_id":"57540","status":"public","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Rolling processes of conventional cast Al-Li alloys quickly reach their limits due to relatively poor material formability. This can be overcome by using twin-roll casting to produce thin sheets. Further thermomechanical treatment, including hot or cold rolling, and heat treatment can adjust the mechanical properties of twin-roll cast Al-Li sheets. The whole manufacturing chain requires detailed knowledge of the precipitation and dissolution behavior during heating, soaking and cooling, to purposefully select any process parameters. This study shows the process chain of a twin-roll cast Al–Cu–Li alloy achieving a hardness of around 180 HV1 by adapting the heat treatment parameters for homogenisation, hot rolling and age hardening. Both hardness and microstructure evolution are visualised along the process chain.</jats:p>"}],"type":"journal_article","publication":"Production Engineering","doi":"10.1007/s11740-024-01322-x","title":"Process chain of a twin-roll cast aluminium-copper-lithium alloy","date_created":"2024-12-02T13:43:15Z","author":[{"first_name":"Sina","full_name":"Mallow, Sina","last_name":"Mallow"},{"full_name":"Broer, Jette","last_name":"Broer","first_name":"Jette"},{"last_name":"Milkereit","full_name":"Milkereit, Benjamin","first_name":"Benjamin"},{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"first_name":"Kay-Peter","last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter"},{"first_name":"Kai-Uwe","orcid":"0000-0003-0741-3812","last_name":"Garthe","full_name":"Garthe, Kai-Uwe","id":"11199"},{"first_name":"Dennis","full_name":"Milaege, Dennis","id":"35461","last_name":"Milaege"},{"first_name":"Viktoriya","full_name":"Boyko, Viktoriya","last_name":"Boyko"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"},{"first_name":"Olaf","full_name":"Kessler, Olaf","last_name":"Kessler"}],"publisher":"Springer Science and Business Media LLC","date_updated":"2024-12-02T13:46:39Z","citation":{"chicago":"Mallow, Sina, Jette Broer, Benjamin Milkereit, Olexandr Grydin, Kay-Peter Hoyer, Kai-Uwe Garthe, Dennis Milaege, Viktoriya Boyko, Mirko Schaper, and Olaf Kessler. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” <i>Production Engineering</i>, 2024. <a href=\"https://doi.org/10.1007/s11740-024-01322-x\">https://doi.org/10.1007/s11740-024-01322-x</a>.","ieee":"S. Mallow <i>et al.</i>, “Process chain of a twin-roll cast aluminium-copper-lithium alloy,” <i>Production Engineering</i>, 2024, doi: <a href=\"https://doi.org/10.1007/s11740-024-01322-x\">10.1007/s11740-024-01322-x</a>.","ama":"Mallow S, Broer J, Milkereit B, et al. Process chain of a twin-roll cast aluminium-copper-lithium alloy. <i>Production Engineering</i>. Published online 2024. doi:<a href=\"https://doi.org/10.1007/s11740-024-01322-x\">10.1007/s11740-024-01322-x</a>","apa":"Mallow, S., Broer, J., Milkereit, B., Grydin, O., Hoyer, K.-P., Garthe, K.-U., Milaege, D., Boyko, V., Schaper, M., &#38; Kessler, O. (2024). Process chain of a twin-roll cast aluminium-copper-lithium alloy. <i>Production Engineering</i>. <a href=\"https://doi.org/10.1007/s11740-024-01322-x\">https://doi.org/10.1007/s11740-024-01322-x</a>","mla":"Mallow, Sina, et al. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” <i>Production Engineering</i>, Springer Science and Business Media LLC, 2024, doi:<a href=\"https://doi.org/10.1007/s11740-024-01322-x\">10.1007/s11740-024-01322-x</a>.","short":"S. Mallow, J. Broer, B. Milkereit, O. Grydin, K.-P. Hoyer, K.-U. Garthe, D. Milaege, V. Boyko, M. Schaper, O. Kessler, Production Engineering (2024).","bibtex":"@article{Mallow_Broer_Milkereit_Grydin_Hoyer_Garthe_Milaege_Boyko_Schaper_Kessler_2024, title={Process chain of a twin-roll cast aluminium-copper-lithium alloy}, DOI={<a href=\"https://doi.org/10.1007/s11740-024-01322-x\">10.1007/s11740-024-01322-x</a>}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Mallow, Sina and Broer, Jette and Milkereit, Benjamin and Grydin, Olexandr and Hoyer, Kay-Peter and Garthe, Kai-Uwe and Milaege, Dennis and Boyko, Viktoriya and Schaper, Mirko and Kessler, Olaf}, year={2024} }"},"year":"2024","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0944-6524","1863-7353"]}},{"doi":"10.3390/cryst13111592","author":[{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"last_name":"Milaege","full_name":"Milaege, Dennis","first_name":"Dennis"},{"last_name":"Hein","orcid":"0000-0002-3732-2236","id":"52771","full_name":"Hein, Maxwell","first_name":"Maxwell"},{"first_name":"Kay-Peter","id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"volume":13,"date_updated":"2023-11-21T15:30:57Z","citation":{"chicago":"Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Kay-Peter Hoyer, and Mirko Schaper. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” <i>Crystals</i> 13, no. 11 (2023). <a href=\"https://doi.org/10.3390/cryst13111592\">https://doi.org/10.3390/cryst13111592</a>.","ieee":"S. Pramanik, D. Milaege, M. Hein, K.-P. Hoyer, and M. Schaper, “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach,” <i>Crystals</i>, vol. 13, no. 11, Art. no. 1592, 2023, doi: <a href=\"https://doi.org/10.3390/cryst13111592\">10.3390/cryst13111592</a>.","ama":"Pramanik S, Milaege D, Hein M, Hoyer K-P, Schaper M. Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach. <i>Crystals</i>. 2023;13(11). doi:<a href=\"https://doi.org/10.3390/cryst13111592\">10.3390/cryst13111592</a>","short":"S. Pramanik, D. Milaege, M. Hein, K.-P. Hoyer, M. Schaper, Crystals 13 (2023).","bibtex":"@article{Pramanik_Milaege_Hein_Hoyer_Schaper_2023, title={Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach}, volume={13}, DOI={<a href=\"https://doi.org/10.3390/cryst13111592\">10.3390/cryst13111592</a>}, number={111592}, journal={Crystals}, publisher={MDPI AG}, author={Pramanik, Sudipta and Milaege, Dennis and Hein, Maxwell and Hoyer, Kay-Peter and Schaper, Mirko}, year={2023} }","mla":"Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” <i>Crystals</i>, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/cryst13111592\">10.3390/cryst13111592</a>.","apa":"Pramanik, S., Milaege, D., Hein, M., Hoyer, K.-P., &#38; Schaper, M. (2023). Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach. <i>Crystals</i>, <i>13</i>(11), Article 1592. <a href=\"https://doi.org/10.3390/cryst13111592\">https://doi.org/10.3390/cryst13111592</a>"},"intvolume":"        13","publication_status":"published","publication_identifier":{"issn":["2073-4352"]},"article_number":"1592","user_id":"48411","department":[{"_id":"9"},{"_id":"158"}],"_id":"49107","status":"public","type":"journal_article","title":"Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach","date_created":"2023-11-21T15:29:49Z","publisher":"MDPI AG","year":"2023","issue":"11","quality_controlled":"1","language":[{"iso":"eng"}],"keyword":["Inorganic Chemistry","Condensed Matter Physics","General Materials Science","General Chemical Engineering"],"abstract":[{"text":"<jats:p>The effect of plaque deposition (atherosclerosis) on blood flow behaviour is investigated via computational fluid dynamics and structural mechanics simulations. To mitigate the narrowing of coronary artery atherosclerosis (stenosis), the computational modelling of auxetic and non-auxetic stents was performed in this study to minimise or even avoid these deposition agents in the future. Computational modelling was performed in unrestricted (open) conditions and restricted (in an artery) conditions. Finally, stent designs were produced by additive manufacturing, and mechanical testing of the stents was undertaken. Auxetic stent 1 and auxetic stent 2 exhibit very little foreshortening and radial recoil in unrestricted deployment conditions compared to non-auxetic stent 3. However, stent 2 shows structural instability (strut failure) during unrestricted deployment conditions. For the restricted deployment condition, stent 1 shows a higher radial recoil compared to stent 3. In the tensile test simulations, short elongation for stent 1 due to strut failure is demonstrated, whereas no structural instability is noticed for stent 2 and stent 3 until 0.5 (mm/mm) strain. The as-built samples show a significant thickening of the struts of the stents resulting in short elongations during tensile testing compared to the simulations (stent 2 and stent 3). A modelling framework for the stent deployment system that enables the selection of appropriate stent designs before in vivo testing is required. This leads to the acceleration of the development process and a reduction in time, resulting in less material wastage. The modelling framework shall be useful for doctors designing patient-specific stents.</jats:p>","lang":"eng"}],"publication":"Crystals"},{"publication_identifier":{"issn":["2504-4494"]},"publication_status":"published","intvolume":"         7","citation":{"chicago":"Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” <i>Journal of Manufacturing and Materials Processing</i> 7, no. 5 (2023). <a href=\"https://doi.org/10.3390/jmmp7050169\">https://doi.org/10.3390/jmmp7050169</a>.","ieee":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,” <i>Journal of Manufacturing and Materials Processing</i>, vol. 7, no. 5, Art. no. 169, 2023, doi: <a href=\"https://doi.org/10.3390/jmmp7050169\">10.3390/jmmp7050169</a>.","ama":"Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. <i>Journal of Manufacturing and Materials Processing</i>. 2023;7(5). doi:<a href=\"https://doi.org/10.3390/jmmp7050169\">10.3390/jmmp7050169</a>","short":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, M. Schaper, Journal of Manufacturing and Materials Processing 7 (2023).","bibtex":"@article{Borgert_Neuser_Hoyer_Homberg_Schaper_2023, title={Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates}, volume={7}, DOI={<a href=\"https://doi.org/10.3390/jmmp7050169\">10.3390/jmmp7050169</a>}, number={5169}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borgert, Thomas and Neuser, Moritz and Hoyer, Kay-Peter and Homberg, Werner and Schaper, Mirko}, year={2023} }","mla":"Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” <i>Journal of Manufacturing and Materials Processing</i>, vol. 7, no. 5, 169, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/jmmp7050169\">10.3390/jmmp7050169</a>.","apa":"Borgert, T., Neuser, M., Hoyer, K.-P., Homberg, W., &#38; Schaper, M. (2023). Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. <i>Journal of Manufacturing and Materials Processing</i>, <i>7</i>(5), Article 169. <a href=\"https://doi.org/10.3390/jmmp7050169\">https://doi.org/10.3390/jmmp7050169</a>"},"date_updated":"2024-03-14T15:22:06Z","volume":7,"author":[{"first_name":"Thomas","id":"83141","full_name":"Borgert, Thomas","last_name":"Borgert"},{"last_name":"Neuser","full_name":"Neuser, Moritz","id":"32340","first_name":"Moritz"},{"last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411","first_name":"Kay-Peter"},{"id":"233","full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"doi":"10.3390/jmmp7050169","type":"journal_article","status":"public","_id":"47535","project":[{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"}],"department":[{"_id":"156"},{"_id":"158"}],"user_id":"32340","article_number":"169","article_type":"original","quality_controlled":"1","issue":"5","year":"2023","publisher":"MDPI AG","date_created":"2023-10-02T06:46:53Z","title":"Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates","publication":"Journal of Manufacturing and Materials Processing","abstract":[{"text":"<jats:p>Consistent lightweight construction in the area of vehicle manufacturing requires the increased use of multi-material combinations. This, in turn, requires an adaptation of standard joining techniques. In multi-material combinations, the importance of integral cast components, in particular, is increasing and poses additional technical challenges for the industry. One approach to solve these challenges is adaptable joining elements manufactured by a thermomechanical forming process. By applying an incremental and thermomechanical joining process, it is possible to react immediately and adapt the joining process inline to reduce the number of different joining elements. In the investigation described in this publication, cast plates made of the cast aluminium alloy EN AC-AlSi9 serve as joining partners, which are processed by sand casting. The joining process of hypoeutectic AlSi alloys is challenging as their brittle character leads to cracks in the joint during conventional mechanical joining. To solve this, the frictional heat of the novel joining process applied can provide a finer microstructure in the hypoeutectic AlSi9 cast alloy. In detail, its Si is finer-grained, resulting in higher ductility of the joint. This study reveals the thermomechanical joining suitability of a hypoeutectic cast aluminium alloy in combination with adaptively manufactured auxiliary joining elements.</jats:p>","lang":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"language":[{"iso":"eng"}]},{"citation":{"ama":"Pramanik S, Andreiev A, Hoyer K-P, et al. Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy. <i>Powders</i>. 2023;2(1):59-74. doi:<a href=\"https://doi.org/10.3390/powders2010005\">10.3390/powders2010005</a>","ieee":"S. Pramanik <i>et al.</i>, “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy,” <i>Powders</i>, vol. 2, no. 1, pp. 59–74, 2023, doi: <a href=\"https://doi.org/10.3390/powders2010005\">10.3390/powders2010005</a>.","chicago":"Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, Jan Tobias Krüger, Florian Hengsbach, Alexander Kircheis, Weiyu Zhao, Jörg Fischer-Bühner, and Mirko Schaper. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” <i>Powders</i> 2, no. 1 (2023): 59–74. <a href=\"https://doi.org/10.3390/powders2010005\">https://doi.org/10.3390/powders2010005</a>.","bibtex":"@article{Pramanik_Andreiev_Hoyer_Krüger_Hengsbach_Kircheis_Zhao_Fischer-Bühner_Schaper_2023, title={Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy}, volume={2}, DOI={<a href=\"https://doi.org/10.3390/powders2010005\">10.3390/powders2010005</a>}, number={1}, journal={Powders}, publisher={MDPI AG}, author={Pramanik, Sudipta and Andreiev, Anatolii and Hoyer, Kay-Peter and Krüger, Jan Tobias and Hengsbach, Florian and Kircheis, Alexander and Zhao, Weiyu and Fischer-Bühner, Jörg and Schaper, Mirko}, year={2023}, pages={59–74} }","short":"S. Pramanik, A. Andreiev, K.-P. Hoyer, J.T. Krüger, F. Hengsbach, A. Kircheis, W. Zhao, J. Fischer-Bühner, M. Schaper, Powders 2 (2023) 59–74.","mla":"Pramanik, Sudipta, et al. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” <i>Powders</i>, vol. 2, no. 1, MDPI AG, 2023, pp. 59–74, doi:<a href=\"https://doi.org/10.3390/powders2010005\">10.3390/powders2010005</a>.","apa":"Pramanik, S., Andreiev, A., Hoyer, K.-P., Krüger, J. T., Hengsbach, F., Kircheis, A., Zhao, W., Fischer-Bühner, J., &#38; Schaper, M. (2023). Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy. <i>Powders</i>, <i>2</i>(1), 59–74. <a href=\"https://doi.org/10.3390/powders2010005\">https://doi.org/10.3390/powders2010005</a>"},"page":"59-74","intvolume":"         2","year":"2023","issue":"1","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2674-0516"]},"doi":"10.3390/powders2010005","title":"Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy","author":[{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"first_name":"Anatolii","last_name":"Andreiev","full_name":"Andreiev, Anatolii","id":"50215"},{"last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411","first_name":"Kay-Peter"},{"first_name":"Jan Tobias","full_name":"Krüger, Jan Tobias","id":"44307","last_name":"Krüger","orcid":"0000-0002-0827-9654"},{"full_name":"Hengsbach, Florian","last_name":"Hengsbach","first_name":"Florian"},{"full_name":"Kircheis, Alexander","last_name":"Kircheis","first_name":"Alexander"},{"full_name":"Zhao, Weiyu","last_name":"Zhao","first_name":"Weiyu"},{"full_name":"Fischer-Bühner, Jörg","last_name":"Fischer-Bühner","first_name":"Jörg"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"date_created":"2023-02-02T14:24:33Z","volume":2,"publisher":"MDPI AG","date_updated":"2023-06-01T14:22:00Z","status":"public","abstract":[{"text":"<jats:p>The current investigation shows the feasibility of 316L steel powder production via three different argon gas atomisation routes (closed coupled atomisation, free fall atomisation with and without hot gas), along with subsequent sample production by laser powder bed fusion (PBF-LB). Here, a mixture of pure Fe and atomised 316L steel powder is used for PBF-LB to induce a chemical composition gradient in the microstructure. Optical microscopy and μ-CT investigations proved that the samples processed by PBF-LB exhibit very little porosity. Combined EBSD-EDS measurements show the chemical composition gradient leading to the formation of a local fcc-structure. Upon heat treatment (1100 °C, 14 h), the chemical composition is homogeneous throughout the microstructure. A moderate decrease (1060 to 985 MPa) in the sample’s ultimate tensile strength (UTS) is observed after heat treatment. However, the total elongation of the as-built and heat-treated samples remains the same (≈22%). Similarly, a slight decrease in the hardness from 341 to 307 HV1 is observed upon heat treatment.</jats:p>","lang":"eng"}],"type":"journal_article","publication":"Powders","language":[{"iso":"eng"}],"user_id":"43720","department":[{"_id":"9"},{"_id":"158"}],"_id":"41492"},{"volume":317,"author":[{"first_name":"Anatolii","last_name":"Andreiev","full_name":"Andreiev, Anatolii","id":"50215"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"last_name":"Hengsbach","full_name":"Hengsbach, Florian","first_name":"Florian"},{"last_name":"Haase","id":"35970","full_name":"Haase, Michael","first_name":"Michael"},{"first_name":"Lennart","last_name":"Tasche","id":"71508","full_name":"Tasche, Lennart"},{"first_name":"Kristina","full_name":"Duschik, Kristina","last_name":"Duschik"},{"first_name":"Mirko","id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper"}],"date_created":"2023-04-20T10:39:14Z","date_updated":"2023-06-01T14:21:45Z","publisher":"Elsevier BV","doi":"10.1016/j.jmatprotec.2023.117991","title":"Powder bed fusion of soft-magnetic iron-based alloys with high silicon content","publication_identifier":{"issn":["0924-0136"]},"quality_controlled":"1","publication_status":"published","intvolume":"       317","citation":{"mla":"Andreiev, Anatolii, et al. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” <i>Journal of Materials Processing Technology</i>, vol. 317, 117991, Elsevier BV, 2023, doi:<a href=\"https://doi.org/10.1016/j.jmatprotec.2023.117991\">10.1016/j.jmatprotec.2023.117991</a>.","bibtex":"@article{Andreiev_Hoyer_Hengsbach_Haase_Tasche_Duschik_Schaper_2023, title={Powder bed fusion of soft-magnetic iron-based alloys with high silicon content}, volume={317}, DOI={<a href=\"https://doi.org/10.1016/j.jmatprotec.2023.117991\">10.1016/j.jmatprotec.2023.117991</a>}, number={117991}, journal={Journal of Materials Processing Technology}, publisher={Elsevier BV}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Hengsbach, Florian and Haase, Michael and Tasche, Lennart and Duschik, Kristina and Schaper, Mirko}, year={2023} }","short":"A. Andreiev, K.-P. Hoyer, F. Hengsbach, M. Haase, L. Tasche, K. Duschik, M. Schaper, Journal of Materials Processing Technology 317 (2023).","apa":"Andreiev, A., Hoyer, K.-P., Hengsbach, F., Haase, M., Tasche, L., Duschik, K., &#38; Schaper, M. (2023). Powder bed fusion of soft-magnetic iron-based alloys with high silicon content. <i>Journal of Materials Processing Technology</i>, <i>317</i>, Article 117991. <a href=\"https://doi.org/10.1016/j.jmatprotec.2023.117991\">https://doi.org/10.1016/j.jmatprotec.2023.117991</a>","ama":"Andreiev A, Hoyer K-P, Hengsbach F, et al. Powder bed fusion of soft-magnetic iron-based alloys with high silicon content. <i>Journal of Materials Processing Technology</i>. 2023;317. doi:<a href=\"https://doi.org/10.1016/j.jmatprotec.2023.117991\">10.1016/j.jmatprotec.2023.117991</a>","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Florian Hengsbach, Michael Haase, Lennart Tasche, Kristina Duschik, and Mirko Schaper. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” <i>Journal of Materials Processing Technology</i> 317 (2023). <a href=\"https://doi.org/10.1016/j.jmatprotec.2023.117991\">https://doi.org/10.1016/j.jmatprotec.2023.117991</a>.","ieee":"A. Andreiev <i>et al.</i>, “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,” <i>Journal of Materials Processing Technology</i>, vol. 317, Art. no. 117991, 2023, doi: <a href=\"https://doi.org/10.1016/j.jmatprotec.2023.117991\">10.1016/j.jmatprotec.2023.117991</a>."},"year":"2023","department":[{"_id":"158"},{"_id":"146"},{"_id":"219"}],"user_id":"43720","_id":"44078","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Metals and Alloys","Computer Science Applications","Modeling and Simulation","Ceramics and Composites"],"article_number":"117991","publication":"Journal of Materials Processing Technology","type":"journal_article","status":"public"},{"date_updated":"2023-08-16T06:29:57Z","author":[{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Mirko","id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper"}],"volume":29,"doi":"10.1108/rpj-06-2022-0190","publication_status":"published","publication_identifier":{"issn":["1355-2546","1355-2546"]},"citation":{"bibtex":"@article{Pramanik_Hoyer_Schaper_2023, title={Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples}, volume={29}, DOI={<a href=\"https://doi.org/10.1108/rpj-06-2022-0190\">10.1108/rpj-06-2022-0190</a>}, number={6}, journal={Rapid Prototyping Journal}, publisher={Emerald}, author={Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko}, year={2023}, pages={1257–1269} }","short":"S. Pramanik, K.-P. Hoyer, M. Schaper, Rapid Prototyping Journal 29 (2023) 1257–1269.","mla":"Pramanik, Sudipta, et al. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” <i>Rapid Prototyping Journal</i>, vol. 29, no. 6, Emerald, 2023, pp. 1257–69, doi:<a href=\"https://doi.org/10.1108/rpj-06-2022-0190\">10.1108/rpj-06-2022-0190</a>.","apa":"Pramanik, S., Hoyer, K.-P., &#38; Schaper, M. (2023). Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples. <i>Rapid Prototyping Journal</i>, <i>29</i>(6), 1257–1269. <a href=\"https://doi.org/10.1108/rpj-06-2022-0190\">https://doi.org/10.1108/rpj-06-2022-0190</a>","ama":"Pramanik S, Hoyer K-P, Schaper M. Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples. <i>Rapid Prototyping Journal</i>. 2023;29(6):1257-1269. doi:<a href=\"https://doi.org/10.1108/rpj-06-2022-0190\">10.1108/rpj-06-2022-0190</a>","chicago":"Pramanik, Sudipta, Kay-Peter Hoyer, and Mirko Schaper. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” <i>Rapid Prototyping Journal</i> 29, no. 6 (2023): 1257–69. <a href=\"https://doi.org/10.1108/rpj-06-2022-0190\">https://doi.org/10.1108/rpj-06-2022-0190</a>.","ieee":"S. Pramanik, K.-P. Hoyer, and M. Schaper, “Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples,” <i>Rapid Prototyping Journal</i>, vol. 29, no. 6, pp. 1257–1269, 2023, doi: <a href=\"https://doi.org/10.1108/rpj-06-2022-0190\">10.1108/rpj-06-2022-0190</a>."},"intvolume":"        29","page":"1257-1269","_id":"46503","user_id":"48411","department":[{"_id":"9"},{"_id":"158"}],"type":"journal_article","status":"public","publisher":"Emerald","date_created":"2023-08-16T06:20:42Z","title":"Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples","quality_controlled":"1","issue":"6","year":"2023","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"language":[{"iso":"eng"}],"publication":"Rapid Prototyping Journal","abstract":[{"lang":"eng","text":"<jats:sec>\r\n<jats:title content-type=\"abstract-subheading\">Purpose</jats:title>\r\n<jats:p>The purpose of this study is to investigate the manufacturability of Fe-3Si lattice structures and the resulting mechanical properties. This study could lead to the successful processing of squirrel cage conductors (a lattice structure by design) of an induction motor by additive manufacturing in the future.</jats:p>\r\n</jats:sec>\r\n<jats:sec>\r\n<jats:title content-type=\"abstract-subheading\">Design/methodology/approach</jats:title>\r\n<jats:p>The compression behaviour of two lattice structures where struts are arranged in a face-centred cubic position and vertical edges (FCCZ), and struts are placed at body-centred cubic (BCC) positions, prepared by laser powder bed fusion (LPBF), is explored. The experimental investigations are supported by finite element method (FEM) simulations.</jats:p>\r\n</jats:sec>\r\n<jats:sec>\r\n<jats:title content-type=\"abstract-subheading\">Findings</jats:title>\r\n<jats:p>The FCCZ lattice structure presents a peak in the stress-strain curve, whereas the BCC lattice structure manifests a plateau. The vertical struts aligned along the compression direction lead to a significant increase in the load-carrying ability of FCCZ lattice structures compared to BCC lattice structures. This results in a peak in the stress-strain curve. However, the BCC lattice structure presents the bending of struts with diagonal struts carrying the major loads with struts near the faceplate receiving the least load. A high concentration of geometrically necessary dislocations (GNDs) near the grain boundaries along cell formation is observed in the microstructure.</jats:p>\r\n</jats:sec>\r\n<jats:sec>\r\n<jats:title content-type=\"abstract-subheading\">Originality/value</jats:title>\r\n<jats:p>To the best of the authors’ knowledge, this is the first study on additive manufacturing of Fe-3Si lattice structures. Currently, there are no investigations in the literature on the manufacturability and mechanical properties of Fe-3Si lattice structures.</jats:p>\r\n</jats:sec>"}]},{"publication_identifier":{"issn":["1438-1656","1527-2648"]},"quality_controlled":"1","publication_status":"published","issue":"14","year":"2023","intvolume":"        25","citation":{"ama":"Pramanik S, Milaege D, Hein M, Andreiev A, Schaper M, Hoyer K-P. An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. <i>Advanced Engineering Materials</i>. 2023;25(14). doi:<a href=\"https://doi.org/10.1002/adem.202201850\">10.1002/adem.202201850</a>","chicago":"Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Anatolii Andreiev, Mirko Schaper, and Kay-Peter Hoyer. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” <i>Advanced Engineering Materials</i> 25, no. 14 (2023). <a href=\"https://doi.org/10.1002/adem.202201850\">https://doi.org/10.1002/adem.202201850</a>.","ieee":"S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, and K.-P. Hoyer, “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures,” <i>Advanced Engineering Materials</i>, vol. 25, no. 14, 2023, doi: <a href=\"https://doi.org/10.1002/adem.202201850\">10.1002/adem.202201850</a>.","apa":"Pramanik, S., Milaege, D., Hein, M., Andreiev, A., Schaper, M., &#38; Hoyer, K.-P. (2023). An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. <i>Advanced Engineering Materials</i>, <i>25</i>(14). <a href=\"https://doi.org/10.1002/adem.202201850\">https://doi.org/10.1002/adem.202201850</a>","short":"S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, K.-P. Hoyer, Advanced Engineering Materials 25 (2023).","bibtex":"@article{Pramanik_Milaege_Hein_Andreiev_Schaper_Hoyer_2023, title={An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures}, volume={25}, DOI={<a href=\"https://doi.org/10.1002/adem.202201850\">10.1002/adem.202201850</a>}, number={14}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Pramanik, Sudipta and Milaege, Dennis and Hein, Maxwell and Andreiev, Anatolii and Schaper, Mirko and Hoyer, Kay-Peter}, year={2023} }","mla":"Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” <i>Advanced Engineering Materials</i>, vol. 25, no. 14, Wiley, 2023, doi:<a href=\"https://doi.org/10.1002/adem.202201850\">10.1002/adem.202201850</a>."},"date_updated":"2023-08-16T06:29:36Z","publisher":"Wiley","volume":25,"author":[{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"first_name":"Dennis","full_name":"Milaege, Dennis","last_name":"Milaege"},{"last_name":"Hein","orcid":"0000-0002-3732-2236","full_name":"Hein, Maxwell","id":"52771","first_name":"Maxwell"},{"last_name":"Andreiev","id":"50215","full_name":"Andreiev, Anatolii","first_name":"Anatolii"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"}],"date_created":"2023-08-16T06:27:19Z","title":"An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures","doi":"10.1002/adem.202201850","publication":"Advanced Engineering Materials","type":"journal_article","status":"public","_id":"46507","department":[{"_id":"9"},{"_id":"158"}],"user_id":"48411","keyword":["Condensed Matter Physics","General Materials Science"],"language":[{"iso":"eng"}]}]